13 best tile saw with stands

Product description

The 10 in. High Capacity Wet Tile Saw provides the professional tile installer a 37 in. rip cut capacity, 8-1/2 in. crosscut capacity, and 1/32 in. over 30 in. accuracy . The rip cut capacity in combination with 18 in. cutting clearance (left of blade) allows the user to rip 36 in. x 36 in. tile in half. The crosscut capacity is ideal for 6 in. sill cutting and up to 8 in. x 48 in. plank cutting at a 30% offset. Perform rip cuts up to 41 in. with plunge. The 28-7/8 in. width from column to cart edge allows you to pass through standard 30 in. door frames. When the water tray system is installed, 18 in. x 36 in. and 24 in. x 24 in. tiles are fully contained within the coverage area, limiting mess when working indoors. The stand allows you to set up a workspace on site, and at only 91 lbs., the tile saw is made for portability to and from the jobsite.

• Cutline indicator, rigid frame, and stainless-steel rollers provide cutting accuracy to within 1/32 in. over 30 in. cuts
• 37 in. rip cut capacity (41 in. with plunge) and 18 in. cutting clearnace left of blade allows users to rip 36 in. x 36 in. tile in half
• 8-1/2 in. crosscut capacity is ideal for cutting 6 in. sills and 8 in. x 48 in. planks at a 30% offset
• 91 lbs. for portablility to and from the jobsite
• 28-7/8 in. width from column to cart edge fits through standard 30 in. door frames
• 15 Amp motor provides 1220 MWO for demanding applications
• 18 in. x 36 in. and 24 in. x 24 in. tile fully contained within water tray system, helping keep the work area clean and dry

User questions & answers

Question:	Depth of cut
Answer:	The D36000S has a 3-3/8" depth of cut at 90-degrees.
Question:	Does it come with a stand
Answer:	Yes, it includes the stand
Question:	Can a 4” brick be cut
Answer:	D36000S is designed for porcelain/tiles
Question:	laser guide
Answer:	The D36000S does not have a laser guide.

Product description

The 69-pound D24000S 10" Wet Tile Saw allows a one person set up and transport. Stainless steel rail system is integrated into the tile saw frame, insuring accurate cuts. Rear and side water attachments can be placed on tile saw to catch over-spray from large tile to keep the water in the pan.The D24000S includes a 10" Wet Tile Saw with a stand that folds for easy transporting and storage. The stand holds the 69-pound Wet Tile Saw and provides an ideal work space. Durable aluminum framing and stainless steel rails are built to stand up to the tough jobsite environment. Lightweight folding stand easily sets up on the job and stores in the truck

Light, ultra-powerful, and a breeze to set-up, the D24000S from DEWALT is ideal for renovating bathrooms, cutting porcelain and stone, or tiling a kitchen back splash or floor. The D24000S ships in two boxes and includes the D24000 saw and the D24001 stand. The saw motor tilts and locks at 45 or 22.5 degrees for clean, smooth cuts without the need for an accessory cart block, and adjustable rollers help properly align the table. When tackling large projects, you'll appreciate the 24-inch ripping capacity (18-inch tile on diagonal). To ensure smooth operation, two adjustable water nozzles allow for the correct positioning of spray on the blade, while optional rear and side water attachments capture over-spray so water stays in the five-gallon pan. Additionally, a 3-1/8-inch depth of cut gives you the option of cutting the majority of V-caps and pavers, and an edge guide with dual position 45-degree guide makes it a snap to line-up corner cuts. There's also an efficient 1.5 HP motor, flip-style edge guide for 90 and 45 degree set-up, and a tub-style bottom with four molded sections that fit into the included stand. And because there's a fully integrated durable stainless steel rail system in the saw frame, you'll enjoy precise cuts every time. When you're done for the day, the removable cutting cart gives you better access to the saw so you can clean up quickly and easily.

• Your purchase includes One Dewalt 10-Inch Wet Tile Saw, Wet Tile Saw Stand, 10-Inch XP4 Porcelain Tile Blade, Submersible Pump, Water Pan, Side Water Tray, Rear Water Tray, Cutting Cart Side Extension, Angle/Rip Guide, Blade Wrench & Hex Wrench
• Tool dimensions: 36” L x 29” W x 24” H. Tool weight: 69 lbs. Voltage – 120V. Peak Horsepower – 1.5 HP
• Other specifications: Arbor Size – 5/8”. Blade Diameter – 10". Diagonal Cut Capacity 18” x 18”. Max depth cut – 3 1/8”. Max Rip Capacity with Plunge – 28”. Bevel Capacity – 45ᵒ
• Cutline indicator and stainless steel rollers provide stable, accurate cutting to within 1/32 inch over 18 inch cuts
• Compact saw frame allows for easy transport and storage in vehicle

User questions & answers

Question:	where is this saw made
Answer:	The sticker on the motor says Taiwan.I don't remember what was on the box.
Question:	Does this saw have enough vertical clearance to cut a 4" thick block by cutting halfway through and flipping it over to finish
Answer:	I Cut a 3" X 4" X 8" Concrete Paving Brick in half with one pass, with room to spare.I estimate it will cut close to 4 inches with one pass. Plenty of water is essential for a beautiful cut.
Question:	What is the length of the tray
Answer:	The tray is 25.5" wide x 35" long...hope this helps.....
Question:	Hi Does it come with a blade
Answer:	Yes, is coming with DeWalt blade. If I good remember thats DW4762

Product features

DEWALT D24000S Heavy-Duty 10-inch Wet Tile Saw with Stand

The 69-pound D24000S 10" Wet Tile Saw allows a one person set up and transport.

Stainless steel rail system is integrated into the tile saw frame, insuring accurate cuts. Rear and side water attachments can be placed on tile saw to catch over-spray from large tile to keep the water in the pan.

The D24000S includes a 10" Wet Tile Saw with a stand that folds for easy transporting and storage.

The stand holds the 69-pound Wet Tile Saw and provides an ideal work space.

Product description

Product Height 37.8 in. Product Length 26.3 in. Product Width 24.8 in. Shipping Weight 24.00 lb.

• Folds for easy transportation and storage
• Two 4" wheels for easy portability
• Powder coated to resist rust and corrosion
• Durable tubular steel construction
• Stand is designed for use with ASIN B008JE670G

User questions & answers

Question:	Does this stand also have the ability to collapse with the saw still mounted for easy transportation and storage
Answer:	No it will not collapse with the saw mounted
Question:	I trying to buy this for a miter saw .....does it fit
Answer:	I believe it is customized for the Chicago Electric model. I can't be absolutely sure because I purchased them together.
Question:	Would this work with my MK 370 wet saw
Answer:	I dont know that's a question u need to ask the seller
Question:	How does the saw attach to the stand
Answer:	The saw sits into those four spikes on the stand

Product description

Tile Saw Stand for the MK-370 EXP model tile saw

• Powerful high-torque motor
• Maintenance-free, self-lubricating pinion and gear-box assembly
• Tilting head allows for precise 45 deg miter cuts
• Variable height cutting head allows for plunge cutting
• Sliding aluminum die-cast cutting table rips 18 in tile

User questions & answers

Question:	Will this stand work with mk 770 tile saw
Answer:	It folds down easily for packing. We took it to Hawaii and it was easy.
Question:	how loud is it
Answer:	In the one that I looked up and found, the second picture you can look at has a sizing chart. S/M is 4.7 inches (12cm). You measure from the bottom of the chin to the top of the nose between the eyes.
Question:	With a change of blade, will this saw work for cutting gemstone slabs for cabochons
Answer:	look at the 4th image - it's the sizing chart
Question:	can cut metal
Answer:	Its not a scuba tank/mask so however long you can hold your breath without passing out.
Question:	Can you cut glass with the diamond blade
Answer:	The description of this snorkel on amazon states “designed in Italy”. Hope this helps.
Question:	Does this saw come with a wet hookup
Answer:	It should fit the 11-year-old now the seven-year-old probably has a smaller face so what won't but it will one day

Product description

This Wet Tile Saw Stand folds for easy transport and adjusts to four height positions for user customization. The robust, all-metal construction provides durability. Compatible with both D24000 and D36000 10" Wet Tile Saws

Whether you're a professional moving from one jobsite to the next or simply don't have space for a permanent saw stand in your home or workshop, stability and portability make the DeWalt D24001 tile saw stand an essential accessory. This dependable, all-metal saw stand makes it easy to set up your D24000 tile saw and get to work--quickly and safely. With four different height settings, this stand lets you customize the position of your saw for optimum use, ensuring less wear and tear on your body and improved precision. And when it comes time to pack up, you'll appreciate the convenience of being able to fold the stand flat for transport or storage.

From the Manufacturer

DEWALT D24001 Tile Saw Stand for D24000 Tile Saw

• Folds for easy transport
• Adjusts to four height positions for user customization
• Robust all-metal construction provides durability
• Lightweight body folds flat for easy transport and storage
• Backed by a 3-year limited manufacturer warranty

User questions & answers

Question:	Will this work with a piece of plywood under my saw or as a mudboard to float off of
Answer:	Hello Francisco, if you need 220v, just email us after you place order. We can provide either 110v or 220v so if you need something specific, please just let us know. Otherwise, we will ship voltage according to you destination country.
Question:	Would this hold a Rigid table saw
Answer:	Hello Francisco, if you need 220v, just email us after you place order. We can provide either 110v or 220v so if you need something specific, please just let us know. Otherwise, we will ship voltage according to you destination country.
Question:	Is this stand universal i have a mk370 saw
Answer:	This ice cream machine can make ice cream as your intentions.
Question:	will this fit the ridgid model r4040 wet saw
Answer:	yes, you can use your own base mix, actually you can test it by different kinds of mix, but pls. remember this is only a common gelato hard ice cream machine.

Product description

Delta 96-014 Folding portable tile saw stand for Delta 7 and 10 inch CRUZER wet saws

• Specifically designed to fit the 7 inch and 10 inch Delta Cruzer tile saws
• One-step set up and fold using the foot actuated pedal
• Designed for quick setup and easy transport
• Lightweight steel tube construction provides a stable work surface

User questions & answers

Question:	Will this work for a Beast Tile Saw 7in or 10in
Answer:	To your first suggestion regarding plywood under your saw, it should work as long as you have it secured with some sort of attachment to the cross bars. However, I am no expert at this so I would highly suggest contacting DeWalt to get their professional opinion.
Question:	Will this hold my mk 101 tile saw
Answer:	We have not tested the D24000 with a Rigid table saw.
Question:	The description says its made of lightweight tubing, what is the weight capacity of this stand
Answer:	It would work on a MK. But designed to be used with a dewalt wet tile saw.
Question:	Will this fit the Ridgid 4092 Tile Saw
Answer:	I do not know. It was for somebody else. Sorry

Product description

The QEP 900XT Pro Tile Saw features a powerful 2.25 HP, 15 Amp motor that easily cuts through ceramic tile, porcelain and stone. This saw has a large cutting capacity to perform rip cuts on 24 in. tiles, diagonal cuts on 18 in. tiles, as well as having the ability to cut large tile or pavers up to 3-3/4 in. thick. The 900XT Tile Saw features full-coverage splash guards, two side trays and a large rear water containment tray to help minimize overspray, keeping the work area dry and clean. In addition, the side extension on the saw table offers maximum support for large format tiles. These attributes, coupled with the laser cutting guide, LED work light and the rubber-coated aluminum table to help keep tiles in place, make the rugged QEP 900XT, a powerful tile saw with the features that matter most to the tile contractor.

• Powerful 2.25 HP, 15 Amp motor cuts for fast and accurate cutting of all types of tile including ceramic, porcelain, slate, stone and marble
• Equipped with a premium porcelain-rated 10 in. diamond blade for cutting the toughest tiles
• Adjustable plunging and pivoting motor head for interior cutting, miter cuts and rip/angle cuts
• Designed with a quick-release folding stand and oversized wheels making it easy to transport around the job site
• Side extension table for supporting large format tile

User questions & answers

Question:	How many inches from the blade to the left bracket holding motor up
Answer:	Yes20 "diam
Question:	how many rpm is in the machine
Answer:	It means it does need to be placed on the grinder in any certain way. Hope this helps
Question:	Will this saw do plunge cuts
Answer:	It should. It cut ceramic and porcelain tile like butter.
Question:	Will this saw do plunge cuts
Answer:	It is designed to cut steel but if you had to it would probably handle 1/8 inch or less. If you are thinking of buying it for that purpose, get a hss metal hole saw instead.

Product description

The two-position cutting head on this 2.5 HP tile saw lets you adjust blade for a variety of tiles or bricks. Includes built-in 3 gallon per minute water pump, removable easy-to-clean high-impact ABS water tub. Adjustable cutting head lets you adjust blade for standard tiles or bricks up to 3-1/2 in. 24 in. cutting capacity Head pivots to allow 22.5° and 45° bevel cuts Powerful dual capacitor motor with sealed bearings and thermal overload protection Heavy duty cast alloy column and cutting head for reduced vibration Oversized steel frame with precision linear bar system for smooth operation

• Cuts tiles up to 18" long, 12" diagonally
• Cuts to a maximum depth of 3-1/8"
• Oversized steel frame with precision linear bar system for smooth operation
• Unique heavy-duty cast alloy column and cutting head for reduced vibration

User questions & answers

Question:	So basically if this wonderful saw doesn't come with stand and blade and they charge $45 for delivery the actual price is $450 am I right
Answer:	The details above say stand is included. Not sure if that was the case 3 years ago.
Question:	Can this cut 24 by 24 inch tiles
Answer:	yes it will cut a tile 24inches max length, verified per owners manual, if diagonal cut max length is 18 inches.
Question:	I need a saw to cut rocks picked up on geological outings ... all kinds of rocks. Will this work
Answer:	Yes I would think so. It depends on the rock and the saw blade but I have cut rocks with this and it does a fine job.
Question:	Does the folder stand come with tile saw
Answer:	No it doesn't.

Product description

This heavy-duty tile saw is constructed of steel and it features a laser cutting guide with an extended table for cutting large sized tile, marble and stone material. The saw comes equipped with an attached fold-up stand with rear locking wheels for ease of mobility, a large non-slip rubber matted table, an oversized steel frame with precision linear bar system, a pivoting head, a powerful 15amp motor a and it cuts at a maximum 4000 RPM. The removable water tray helps keep the blade cool and the material lubricated with water while cutting. space. This tile wet saw is easy to use and preferred by many.

• Use this tile wet saw to do precise laser-guided cuts through ceramic tile, porcelain tile, marble, slate and stone up to 1-3/16 in. thick
• This handy tile cutting saw includes an oversized steel frame w/precision linear bar system and a removable water tray to keep the blade cool and lubricated during use
• Includes its own heavy duty steel stand with attached rear-locking wheels, a large non-slip rubber matted table, a pivoting head and an attached handle for ease of mobility
• This saw runs on a powerful 15amp motor at a maximum 4,000 RPM and includes a GFCI on cord
• Blade guard is included for safety. Overall width measures 45. 3 in. wide x 27. 3 in. deep

Product description

Folding Stand for MK-100, 101, 101-24 and 1080 Tube Frame Saws.

From the Manufacturer

MK Diamond 168244 stand for MK-101-24 Series saws. Heavy duty stand to easily handle weights of 200 lbs. Satin chrome finish for corrosion resistant long life.

• Heavy duty saw stand easily handles weights of 200 pounds
• Satin chrome finish for corrosion resistant long life
• Folding saw stand
• Fits MK Diamond saws Mk-100 (serial 0315952 and newer), MK-101 (serial 0383410 and newer), MK-101-24, MK-101 Pro (serial 0383358 and newer)
• Fits MK Diamond saws MK-101 Pro24 (serial number 0383503 and newer), Lowes 101, 101Pro 24 HD, and MK-1080 (serial number 0581535 and newer)
• Heavy duty saw stand easily handles weights of 200 lbs
• Satin chrome finish for corrosion resistant long life
• Folding stand fits MK Diamond saws 151991 MK-101 and new 1696121 MK-101-24 tile saw

Product description

The QEP 7 in. Power Pro Tile Wet Saw is designed as a portable saw to handle any professional or DIY project where space prohibits the use of a large wet tile saw. Users will be surprised by the strength of it's true 1 HP, 3600 RPM motor. The power and design of this Tile Wet Saw offers the ability to cut unlimited sizes of the hardest tile including ceramic, porcelain, slate, marble and stone. The water catch system not only reduces water run off but it recycles the water back into the reservoir minimizing fill frequencies.

• UL approved, powerful, 1 HP, 3600 RPM direct-drive motor Ideal for handling small or large tile projects
• 7 in. continuous rim diamond blade positioned for cutting depths up to 1-1/8 in.
• Interior water baffle minimizes excess water spray, reducing water fill-ups
• Table tilts for 15Degree, 30Degree and 45Degree miter cuts
• Rip and angle cutting guides make accurate and repeat cuts easy

Product description

The POWERTEC MT4009 rolling foldable Table saw stand delivers both rugged work-platform stability for optimal bench top operations, and effortless work-stand mobility/storage for project versatility and convenience. Solid steel plates and steel tubular body offer maximum reliability and top performance. Heavy, large machines, such as table saws can be mounted onto the steel plates or directly on the stand itself, and hardware for each attachment style is included. Its 22-5/8" Bed Height is ideal for use with table and tile saws, And other similar machines. Stand automatically locks securely in upright position, and its handy pin-release lever assists in folding for easy, efficient storage. Can be stored with mounted saw attached in either the vertical position (secured with sturdy wide foot measuring 12" X 21" X 1/2") or in the horizontal position. Adjustable, firmly gripping rubber-stop feet (with locknuts) further enhances crucial stand integrity. A comfortable, wide handle and 8-Inch rubber wheels make for smooth, ergonomic portability. Streamline workshop productivity with this heavy-duty, high-utility stand. 330lb weight capacity.

• INCLUDES: Foldable Table Saw Stand (Rolling Edition)
• UNIVERSAL: Table saw stand is designed to accommodate a wide assortment of different sized table saws from popular and common brands
• FEATURES: Portable design with a pair of high-traction 8” wheels for mobility, an automatic locking pin release lever for quick and easy folding action/ storage, plus two adjustable solid steel plates with spaced slots for versatile mounting options
• PORTABILITY: Compact layout designed for fast setup and hassle-free breakdown – and can be stored with or without saw attached (vertically or horizontally)
• WEIGHT CAPACITY: Built with a heavy duty steel tubular frame that seamlessly supports an impressive 330lbs of downward force

User questions & answers

Question:	Can a Ridgid 10 in table saw fit
Answer:	Our Customer Care Team is more than happy to provide nutritional information regarding our formulas! They can be reached at 800-829-4493. Thank you.
Question:	Does the powertec mt4009 rolling foldable table saw stand fit the hercules 10" jobsite table saw
Answer:	Smaller than any U.S. coins - about the size of a peanut M&M.
Question:	Will this work with dewalt d24000 tile saw
Answer:	My dog is an 80 lb golden retriever. He loves it. The kibble pieces are larger than the kibble for smaller dogs but I think a 40 lb dog could manage it.
Question:	can I use this with a tack life table saw
Answer:	I never really went too deep in to it. When my puppy was little he had problem will dry skin, so doctor advised to get this brand Duck with potatoes, and puppy ate it well. My dog has allergies for chicken but beef and duck are good

Product features

The Rolling Foldable Table Saw Stand by POWERTEC

The POWERTEC MT4009 rolling foldable Table saw stand delivers both rugged work-platform stability for optimal bench top operations, and effortless work-stand mobility/storage for project versatility and convenience. Solid steel plates and steel tubular body offer maximum reliability and top performance. Heavy, large machines, such as table saws can be mounted onto the steel plates or directly on the stand itself, and hardware for each attachment style is included. Its 22-5/8" Bed Height is ideal for use with table and tile saws, and other similar machines.

Versatile Mounting Options

Each plate has 14 of 2-1/2” x 5/16” slots for mounting the saw; maximum mounting spacing: 20-5/8" x 18-1/2"

Handy pin-release lever

Automatically locks securely in upright position; handy pin-release lever assists in folding for easy storage

8-inch rubber wheels

Portable design with a pair of high-traction 8” wheels for mobility, an automatic locking pin release lever for quick and easy folding action/ storage

Compact layout designed for fast setup and hassle-free breakdown

Stand automatically locks securely in upright position, and its handy pin-release lever assists in folding for easy, efficient storage. Can be stored with mounted saw attached in either the vertical position (secured with sturdy wide foot measuring 12" x 21" x 1/2") or in the horizontal position. Adjustable, firmly gripping rubber-stop feet (with locknuts) further enhances crucial stand integrity. A comfortable, wide handle and 8-Inch rubber wheels make for smooth, ergonomic portability. Streamline workshop productivity with this heavy-duty, high-utility stand. 330lb weight capacity.

The height is 43-3/8" when the stand is folded in vertical position.

To Mount A Table Saw

There are 2 sets of mounting hardware, a 1-3/4" set for mounting to the table top and a 2-1/2" set for mounting a larger saw directly to the frame using the holes in the frame.

• Place the saw to be used on the table top.
• Move the saw around until the hole pattern matches the slot combination on the table top, secure with the mounting hardware (1-3/4" set) supplied.
• Insert the bolt through the bottom of the table and secure with flat washer, lock washer and nut.

NOTE: When mounting a larger saw directly to the frame using the mounting hardware (2-1/2" set) supplied, ALWAYS insert the bolt through the bottom of the table and secure with flat washer, lock washer and nut.

Product description

PORTER-CABLE PCE980 7 in. Table Top Wet Tile Saw features a powerful 1.0 Horsepower motor providing smooth cutting of porcelain, ceramic and Stone tiles. Cast-metal cutting cart delivers 17 in. Cutting capacity, allowing cutting of 12 in. X 12 in. Tile on a Diagonal. Get accuracy of 1/16 in. On cuts up to 12 in. Long. The Pce980 includes Pce980 7 in. Wet tile saw, 7 in. Porcelain tile blade, Miter square, blade wrench. Includes 3 year limited warranty, 1 year free service contract, and 90 day money back guarantee.

• Onboard miter square to help line up miter cuts and repeatable rip cuts
• Roll cage for easy carrying and protection of the cutting cart
• Splash guard keeps water from spraying the tool operator
• Stainless steel fixed deck holds up to water and jobsite abuse
• Equipped with drain plug to quickly drain water over a bucket without a mess.RPM:2850 rpm

User questions & answers

Question:	how thick will this cut
Answer:	I would say 1:4, if you are cutting porcelain that thick take it slow, natural stone will cut easier. I highly recommend this saw, I use it for small jobs, it’s really great in tight spaces. In my opinion it’s the better of the smaller wet saws as I prefer a rolling table for more accurate cuts. I however use an MK on my bigger jobs and large format tile and stone and it’s a beast with no limitations but cost about 10x what this saw cost. I do a lot of baths and kitchens and I love it!
Question:	Alway problems substituting other brand blades - and can't find PC replacement blades - can anyone confirm good to excellent substitute
Answer:	I've tried several after market blades with this saw. The problem I've experienced is the original PC blade produces a slightly wider cut, allowing the tile to get past the guard support in the back. The blades I've tried produce a thinner cut that prevent the tile from passing around the guard support. I'll try the Pearl P4 7 inch to see if it works, although 50$ is a gamble I'd rather not bet on.
Question:	Can this saw cut glass tiles
Answer:	It can cut glass but without buying a blade specifically for glass tiles you might be disappointed. Every tile installer I know has several different blades always on hand for the abundance of materials thrown at him. Glass Master is a good glass blade and manual cutters often do excellent. With the stock blade you will get some chipping along the cut. Which could be polished out with extra effort. If you can handle chipping go for it.
Question:	Does this saw do miter cuts? Can you angle the blade, or the table
Answer:	Yes, this table saw does simple mitre cuts. The blade is fixed. The table is fixed (does not angle for a compound mitre cut). The product is positioned on the (right) cutting cart that feeds the tile to the blade. The saw comes with a miter square for basic angle cuts.