11 best hitachi contractor table saws

Product description

The Powermatic 64B Table Saw, with left tilt arbor, offers 1-3/4 horsepower in dual voltage to meet the demands of the professional contractor. The transparent blade guard has independent leaves, and the quick release riving knife reduces chance of kickback. A low profile riving knife is included for non-through cuts. An arbor lock is accessed from above the table, eliminating the need for dual blade wrenches. The T-slot miter gauge has rack-and-pinion angle setting, positive stops and extension plate for expanded workpiece support.



The Powermatic 64B has cast iron table and wings with front edge bevel, and the working area is further expanded by the melamine-surfaced wood extension table. The exclusive Accu-Fence® system is available in 30” or 50” rip cut capacity. Storage hooks on the stand keep your accessories within reach.

From the Manufacturer

The 64B table saw, with left tilt arbor, offers 1-3/4 horsepower in dual voltage to meet the demands of the professional contractor. The transparent blade guard has independent leaves, and the quick release riving knife reduces chance of kickback. A low profile riving knife is included for non-through cuts. An arbor lock is accessed from above the table, eliminating the need for dual blade wrenches. The T-slot miter gauge has rack-and-pinion angle setting, positive stops, and extension plate for expanded workpiece support. The 64B has cast iron table and wings with front edge bevel, and the working area is further expanded by the melamine-surfaced wood extension table. The exclusive Accu-Fence® system is available in 30? or 50? rip cut capacity. Storage hooks on the stand keep your accessories within reach.

• EXCLUSIVE ACCU-FENCE SYSTEM: Locks to rail without play for increased safety and precision.
• QUICK-RELEASE RIVING KNIFE: Maintains close blade proximity to reduce chance of kickback.
• CAST IRON TRUNNION: Ensures smooth blade positioning.
• MICRO-ADJUST MITER GAUGE: Offers wider crosscut support.
• BUILT-IN DUST PORT: Increases dust collection efficiency.

User questions & answers

Question:	Is the boxed saw unit in one piece? Can it be removed in pieces for transporting from the pallet to the basement
Answer:	It’s in a few pieces, but the only way you’d get it into a basement is if you have four huge men to lift it. Otherwise- no.
Question:	How many hp are available when plugged in 110v. can it work with 220v 2 phase? if so, how many hp is available this way
Answer:	The saw I have is the Powermatic PM 1000 Table Saw 1.75HP, 1 PH @ 115V. Apparently it can be be rewired for 230V, with a 7A draw. I don't know the resulting HP. Tried to look it up just now, but couldn't satisfy myself that I was getting the right answer due to unknown variables about the motor. I run mine at 115V.
Question:	Is it a left tilting blade
Answer:	yes, the top of the blade goes left
Question:	Can I plug this into any standard outlet
Answer:	Yes, you can plug it into any standard 120v outlet.

Product description

The C10RJS 10" jobsite table saw features a 15-Amp motor with 4,500 RPMs, and is engineered for rip-sawing and cross-cutting of ordinary wood, hardwood, plywood and composite wood materials.



The fold & roll stand is designed with sturdy legs for easy set up and breakdown, providing stability while in use.



The stand also incorporates wheels to ensure the user can maneuver through tough terrain with ease.



The C10RJS features soft start, an electric brake and a large working table size with telescoping table extension that can support a max rip capacity of 35" to the right.



Capable of a 3-1/8" cut at 90 degrees and 2-1/4" cut at 45 degrees, this user-friendly table saw is an ideal choice for any workshop or jobsite.

• TABLE SAW: 10-Inch Table Saw with Stand
• INCLUDES: Table saw, 10-Inch 40-Tooth Carbide Tipped Blade, Blade Guard, Push Stick, Wrenches, Kickback, Rip Fence and Miter Gauge Assemblies, Outfeed Support
• MOTOR: Powerful 15 Amp motor with 4,500 RPM for tackling the toughest cutting applications.Table Material:Aluminum
• BEVEL: 0° to 45°: for cuts ranging from 3-1/8 In. (0°) to 2-1/4 In. (45°)
• TABLE SIZE: 28-3/4" x 22" working table top with outfeed support of 28-3/4" x 2" for easy and stable material support
• CUT CAPACITY: Capable of a 3-1/8 In. cut at 90 degrees and 2-1/4 In. cut at 45 degrees
• TECHNOLOGY: Featuring soft star and electric brake

User questions & answers

Question:	Hat is difference between this and more expensive version
Answer:	Depending on the models, Orbi pro supports 4 to 6 max satellites per base. SXK80 and SRR60 both support 6 satellites max. Please try to rearrange the positions of the current satellites and check if it removes the coverage holes before buying new satellites. Adding more satellites reduces the efficiency of mesh as all of the satellites share the same air-frequency. We have improved automatic detection and switching between wireless and wired backhaul in recent releases. Please upgrade your firmware to the latest.
Question:	does this come with a rack and pinion fence
Answer:	Yes. SRR60, SXR80 can be run in AP (Access point mode). Then your original router will be the NAT and DHCP server. While Orbi Pro will be Layer 2 Mesh Access point
Question:	mine has a broken bracket that mounts the gear for the rip fence. Can I get a replacement or do i need to send back a 105lb saw
Answer:	If you use the SRC60 satellite (wallmount) model, it has a wired 1G port with PoE option and if that port is used to connect it to the router, then the third radio is also freed up for fronthaul and there will be a 4x4, i.e. 1,733Mpbs available.
Question:	Metabo, i am looking for an oval dado blade insert for my c10rjs? Not the rectangular pice for the c10rj. I can't find it anywhere. Thank you
Answer:	I don’t know but I do know that I switched my three labs to It one year ago and they are quite healthy and love it.

Product features

Telescoping Table Extension

Supports 35" of ripping capacity to the right and 22" to the left.

Bevel Range of 0 Degree to 45 Degrees

For cuts ranging from 3-1/8" (at 0 degree) to 2-1/4" (at 45 degrees).

Oversized Power Switch with Emergency Off Safety Cover

Designed at knee level for immediate shut down as an added safety feature.

Stable and durable fold & roll stand

Ensures accurate cuts with less wobble and provides for easy transport.

Product description

The Bosch 4100 10 10 In. Work site Table Saw with Gravity Rise Wheeled Stand delivers both professional rip capacity and outstanding portability for a tool that can get the job done, wherever it is. The powerful 15 Amp saw delivers 4. 0 max HP for outstanding productivity. It also incorporates soft start circuitry for smooth but quick ramp up to the operating Speed to manage the intensity of motor start up and minimize the possibility of tripping a circuit breaker. It includes constant response circuitry to help maintain Speed under load, and overload protection. The square lock rip fence is engineered for maximum trueness and great ease of use, with the fence able to easily glide along the rail for one handed operation. The lighter GTA47W gravity rise wheeled stand has 8 In. treaded rubber composite tires and a single action design for easy set up and transport. It is job site ready with heavy duty construction. The smart guard system is the first modular table saw blade guard, featuring a three position adjustable riving knife, anti kickback pawls and non obstructed view barrier guard assembly. The table saw provides a 29 In. x 21 1/2 In. square tabletop with a 25 In. rip capacity for ripping 4 Ft. wide sheets goods in half. SquareLock rip fence – engineered for enhanced clamping and trueness.

Dimensions: Table saw & stand combination in working position = 30.25" Depth (front to back) x 47" Width (when extension is at in-most position) x 35.5" Height. Table-top dimensions = 21-1/2" Depth (front to back) x 29" Width (when extension is at in-most position). Weight: 58.0lb,Weight of Bare Saw - Lb: 63.0,Weight of Saw, Standard Equipment and Stand - Lb: 92.0,Width: 32.0. Works With: Vacuum Hoses-Common 2-1/2" Vacuum Hoses,Vacuum Hose Adapter for 35 mm Vacuum Cleaner Hoses-VAC004,Dust Bag-TS1004,Zero-Clearance Insert-TS1005,Dado Insert-TS1007,Molding Insert-TS1009,Outfeed Support-TS1016,Left-Side Support-TS1008.

• Powerful table saw – has 15-Amp saw with 4. 0 max HP and 3, 650 rpm, for rip-cutting and cross-cutting of fine and rough materials
• Dimensions: 37.7" D x 29.4" W x 19.4" H | Product Weight: 110 lb
• Large cast aluminum top – provides increased work space and material support with a 30 In. ripping capacity
• Soft-start circuitry – manages intensity of motor start-up and minimizes the likelihood possibility of tripping a circuit breaker
• Constant Response circuitry – helps maintain speed under load
• Restart protection – helps to avoid accidental startup
• Portability – works seamlessly with the included lighter GTA47W Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down
• Smart Guard System – riving knife and anti-kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut

User questions & answers

Question:	Bosch 4100-10 lists two weights 60 lbs and 124.2 lbs...Why is there a difference
Answer:	The table saw itself weights about 60lbs, if you include the stand with the wheels added to the saw it weights more. I believe the d/c 4100-9 weights 124.2 with all the accessories. The 4100-10 is listed as weighting about 110lbs shipped, so 110lbs is the weight with everything attached. Does that help make more sense?
Question:	is there a schematic available for this table saw
Answer:	I don't know how detailed you want to get, but by downloading the owner's manual you get the parts breakdown schematic
Question:	I want to be able to cut a 4 by 4. can i replace the blade with od greater than
Answer:	NO you cannot. A greater diameter blade say 12" would bottom out on the framing below and would reduce the life of the motor as well.
Question:	Max blade height above table
Answer:	Hi! The maximum depth of a cut at 90 degrees for a blade on the 4100-10 Table Saw is 3-1/8". For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

Portability

Works seamlessly with the included Gravity-Rise Wheeled Stand.

Soft-Start Circuitry

Manages the intensity of motor start-up and minimizes the possibility of tripping a circuit breaker

SquareLock Rip Fence

Engineered for enhanced clamping and trueness

Smart Guard System

Riving knife and anti-kickback pawls provide protection.

Product description

• Your purchase includes One Dewalt Table Saw, 10" 24-Tooth Carbide Blade, Rolling Stand, Push Stick, Miter Gauge, Rip Fence, 2x Blade Wrenches, Blade Guard Assembly manual + DEWALT DW3215PT 10-Inch 60 Tooth ATB Crosscutting Saw Blade
• Item dimensions - 31" H x 24.5" W x 31" L
• Other Specs: Max Rip to Left of Blade – 22” | Max Rip to Right of Blade – 32-1/2” | Max Width of Dado – 13/16” | Arbor Size – 5/8” | Amps – 15 | Depth of cut at 45° – 2-1/4” | Depth of cut at 90° – 3-1/8” | No Load Speed: 4800 RPM
• Rolling stand designed for easy set up and breakdown with excellent stability
• Features a 15.0A high torque Motor with the Power to cut pressure Treated lumber and hardwoods

User questions & answers

Question:	How long (in seconds) does the blade continue spinning after the saw is shut off
Answer:	The smallest waist size that the Legacy Deluxe Tool Belt can fit is a 30 inch waist.

Product features

Let's dive into an activity!

Product description

Utilising patented Evolution multipurpose cutting technology, the RAGE 5-S multipurpose table saw will easily cut steel, aluminium, wood and plastic using just one blade. The cut is fast clean and accurate, producing no burr and virtually no sparks when cutting steel. There is no heat build-up either, so the material is cool and can be handled straight away. This product gives the user an opportunity you can not find with any other table saws. The RAGE 5-S features a powerful hi-torque motor, clear and precise angle settings for mitre and bevel cutting. Additionally, the blade height can be adjusted for cutting a variety of materials. Furthermore, the built-in wheels allow for easy transportation/portability and the folding stand allows for easy storage. The RAGE 5-S is supplied with a R255-TCT multipurpose blade (28 teeth), with a 255 mm blade diameter and 25.4 mm bore diameter.

• Multi-material: Japanese tungsten carbide tipped (TCT) blade included cuts steel, aluminium, wood with embedded nails, plastic and more
• Powerful: 15 A optimised gearbox and blade system, increases motor and blade life to cut through a variety of materials with ease
• Accurate: Rip cutting, assisted by an adjustable, full-length, parallel fence with measuring rail guide; 0 degrees - 45 degrees bevel tilt and 60 degrees - 60 degrees mitre covers all common cutting angles
• R255-TCT multi-material blade (28 teeth) included
• 3 years limited warranty

User questions & answers

Question:	Where can i buy Replacement blades
Answer:	I'm sure it can, but I wouldn't personally do it with this machine. I recently had an issue with my planer where the straight-knife cutterhead was damaged. That's a long story in itself. Anyways, under warranty I had a certified Jet mechanic replace the cutterhead with a new one, which is the same operation you'd do if you replaced it with a helical head. He had a VERY hard time doing it and it even involved his machinist making him a special tool just to disconnect the cutterhead from the gearbox. Not only that, you'd never get your money back out of it. So, if you want a helical head I'd recommend spending the extra money to buy the helical-head version of this planer. This is the path I wish I would've taken.
Question:	Does this saw come with stand
Answer:	You might check to see if blades are installed the right way !!!
Question:	can you cut laminateflooring with this blade
Answer:	Clean your rollers. I use rubbing alcohol and a lintfree cloth. Its a pain to do but makes all the diffrrence. Note that the rollers only move when the machune is running so i carfully clean what a can then flip the machine on and off again quick and wait till it stops and clean. I usually have to repeat that 5 or 6 times to get the entire roller. Careful to as thise blades show no mercy to gloved hands. Dont ask how i know but they did slice thru a 20 dollar pair of gloves like they were paper.
Question:	Can you cut datos with this saw
Answer:	There are three blades in the pack. And they are double sided, so you can flip them and have a new plane surface. Easy to do.

Product features

Powerful 15A Motor

Cut through up to 1/4" mild steel thanks to Powerful 15A hi-torque motor with optimized gearbox & blade system

45° Bevel Capability

Achieve a 45° finish on your workpiece by turning the bevel wheel at the front. Use the detents to reach the required angle every time!

Sliding Table

When making a cut using the sliding table, ensure the anti-vibration clamp is secure to achieve a clean, precise cut

Built-In Table Extensions

Left and right table extensions support wide work-pieces with a table surface area of 47-1/4 x 25-3/16" when fully extended

Easy to Transport & Store

Thanks to the collapsible frame, foot pedal and wheels, going from cutting, to storing the RAGE5-S is a very quick & easy process

Effective Dust Extraction

Keep your workshop clean! With Integrated dust ports above and below the blade, dust is captured when fitted to a vacuum system

Mild Steel

Cut weld-ready mild steel, whether that be 1/4" sheet or tube material (round & square)

Wood with Nails

Cut through hardwood, softwood, reclaimed timber. Even wood with embedded nails!

Aluminum

Cuts through aluminum materials such as checker plate or cable tray with virtually no heat or sparks!

Plastics

Cuts through plastics such as acrylic sheets & drainage tubing cleanly without burning or melting

Product description

• Your purchase includes one Dewalt table saw, 10" 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches, blade guard assembly manual
• Other Specs: Max rip to left of blade – 22” | Max rip to right of blade – 32-1/2” | Max width of Dado – 13/16” | Arbor size – 5/8” | Amps – 15 | Depth of cut at 45° – 2-1/4” | Depth of cut at 90° – 3-1/8” | No Load Speed: 4800 RPM
• Rolling stand designed for easy set up and breakdown with excellent stability
• Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate
• Features a 15.0A high torque motor with the power to cut pressure treated lumber and hardwoods

User questions & answers

Question:	Can i mount the axtra 8-outlet power strip on the table saw
Answer:	Can't see why not. Look online for Garmin-compatible charts, whether from Garmin or not. (My hiking map, with contours and more trails than the USGS maps, was a free download! Look around.) The eTrex models are waterproof, which is a plus. Think seriously about the display size, though. The whole unit fits in the palm of your hand, and its display is only a couple inches high. (See the specs. I might be off a little.) We hikers and hunters can stop and consult the unit, then start walking again. Your boat might travel quite a distance while you peer at that tiny screen, even with the engine stopped. Just a thought.Garmin obviously had boaters in mind when they programmed this, regardless of its size. It even has a "Man Overboard" function that instantly records its current location, then displays the distance and direction back to there while you turn the boat around. It shows tides, too, at whatever tide stations are close to you. Bottom line: it will do everything you need (I think) and do it all day and on into the next morning on a pair of AA cells, but your eyes will ask you why you didn't buy something with a bigger screen.
Question:	What are the dimensions of the unit on the stand when closed up. WxHxD? Need to know if it will fit in the storage cubby I have in the garage
Answer:	The maps that come preloaded are: Worldwide DEM Basemap (NR), Digital Globe demo (Jnx) and USGS Quads - Grand Canyon National Park (Jnx). Unfortunately, you will have to get the topo maps separately.
Question:	Does this saw accept dado blade set
Answer:	yes on the compass (electronic) but turn on the WAAS depending on if you set the compass for a true north or magnetic north WAAS gets rid of the errors jumping from satellite to satellite
Question:	How good would this saw be for a beginning woodworker on a limited budget
Answer:	The Oregon and all the Garmin "state" models all have a touch screen, don't they? The eTrex series doesn't. For controls it has the Power/battery check button and "back button on the right, and on the left, the zoom-in and -out buttons, plus the Menu button. On the front, at top-right, is the main control, a little thumbstick. Use it for scrolling and selecting menu items and for moving the map beyond your location.You'll want to spend some time reading the manual; this thing has a LOT of functionality. Most important shortcut: no matter how deep you go in the menus, double-tapping the Menu button takes you back to the main screen, with Map highlighted.

Product features

10" Jobsite Table Saw 32 - 1/2" (82.5cm) Rip Capacity, and a Rolling Stand

The DWE7491RS 10" Jobsite Table Saw 32 - 1/2" Rip Capacity, and a Rolling Stand has a 15 Amp motor and 32-1/2" rip capacity to allow cutting of large and hardwood materials. Features tool-free guarding component adjustments and fast, accurate fence adjustments. Rolling stand designed for easy set up and breakdown with excellent stability.

• Material support, can be used for narrow rip cuts
• Onboard storage system provides easy access to the Blade Guard Assembly, fence, riving knife, miter gauge, wrenches, push stick, and cord wrap when not in use
• Telescoping fence rails retract to create a small, portable package
• 15 amp Motor quickly rips through hardwoods with ease

Features

• Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate
• 32-1/2" rip capacity easily cuts a variety of larger shelving and trim materials
• Rolling stand designed for easy set up and breakdown with excellent stability
• Flip over ripping fence allows for narrow rip cuts
• 2-1/2" Dust Collection Port easily connects to a vacuum for efficient dust extraction
• 21-7/8" X 26 - 3/8" table provides superior material support

Product description

For a cleaner home, ship and cleaner air; the Miles craft Dust Cutter cuts dust by over 90%

• Nylon
• Quick and easy installation
• Never needs removing to empty
• Fits many different table saws (having base dimensions up to 20" wide and 17" deep)
• Optional and easy vacuum connection
• Comes in 3 modes: collector, funnel and vacuum

User questions & answers

Question:	Will it fit a skil 3410-02 10-inch table saw with folding stand
Answer:	Go to a camping source like Campers World and search for black or grey water flush out valves for the holding tanks. Should find a solution there for somewhat low cost.
Question:	How tall is it? As in from the bottom where the opening is to the top where it attaches to the stand/saw
Answer:	I didn't hook them up to 4inch. I ran 2 3/4 flex and pvc. Btw...it clogs up with saw dust. I drilled a hole on side opposite the slide with a forsner bit to blow it out. I cover the hole with duct tape.
Question:	How does it attach to the table saw base? Velcro
Answer:	No, They are 3 11/16 id and 3 13/16 + 1/32 od. There is nothing 4" here.
Question:	Does it include the adapter to use with 2 1/2” dust collection
Answer:	I used 4" schedule 40 PVC and it fit snugly on the 4" blast gate. I also drilled and screwed two sheet metal screws per blast gate (along with silicon sealer)

Product features

Milescraft 1500 DustCutter

The Milescraft DustCutter will keep the air in your shop and home cleaner! Table saw dust collector cuts by over 90%. For a cleaner home, shop and cleaner air. Use your saw indoors or out. The DustCutter fits most table saws having base dimensions up to 20 in. W and 17 in. D and will connect to vacuum hoses of 1-1/4 in. and 2-1/2 in.

Collector Mode

After using the saw, empty dust into a receptacle by unzipping the bottom of the DustCutter. Bag capacity is 3 cubic feet.

Funnel Mode

Continuously empty dust by unzipping the bottom of the DustCutter, allowing dust to funnel into a receptacle

Vacuum Mode

Attach a 1-1/4″ or 2-1/2″ vacuum hose to the DustCutter and suck it out of the bag and air while operating the table saw

Product description

The Bosch 4100XC-10 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand delivers both professional rip capacity and outstanding portability for a tool that can get the job done, wherever it is. The powerful 15-Amp saw delivers 4. 0 max HP for outstanding productivity. It also incorporates soft-start circuitry for smooth but quick ramp-up to the operating speed. It includes Constant Response circuitry to help maintain speed under load, restart protection to avoid accidental startup and overload protection. The SquareLock rip fence is engineered for maximum trueness and great ease-of-use. It includes an enhanced auxiliary fence for narrow workpieces. The lighter GTA47W Gravity-Rise Wheeled Stand has 8 In. treaded rubber-composite tires and a single-action design for easy set-up and transport. It is jobsite-ready with heavy-duty construction. The Smart Guard System features a three-position adjustable riving knife, anti-kickback pawls and non-obstructed-view barrier guard assembly. The table saw provides a 30 In. x 22-1/2 In. tabletop with a 30 In. rip capacity for ripping 4 Ft. wide sheets goods in half.

• Powerful table saw – has 15-Amp saw with 4. 0 max HP and 3, 650 rpm, for rip-cutting and cross-cutting of fine and rough materials
• Dimensions: 32.5" D x 27" L x 13" H | Product Weight: 94 lb
• Saves space: Large cast aluminum top provides increased work space and material support with a 25 inch. Ripping capacity to cover all typical job site rip cutting widths
• Portability: Works seamlessly with the included lighter GTA47W gravity rise wheeled stand for easy job site mobility, with single action setup and take down
• Protection: Smart guard system contains riving knife and Anti Kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut
• Soft start circuitry: Manages the intensity of motor start up and minimizes the possibility of tripping a circuit breaker

User questions & answers

Question:	will this connect to the festool 27mm dust collector
Answer:	Don't know that item, but the exhaust/dust port on the Bosch mikes out @ 2.50" OD and 2.25" ID; so, w 27 mm close to 1.06"...likely not And FYI, bought the official Bosch dust collection bag which does a poor job...I use my VacMaster hose- the outer nozzle plugs snugly into the Bosch port's ID and picks up 80-90 % of the wood dust generated...as long as I remember to turn the vacuum on..which I sometimes don't ...love this table saw
Question:	Can a dado blade be used in this saw
Answer:	Yes, the 4100XC-10 table saw can dado cut by using TS1007 dado insert. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	is this saw equipped with the Reaxx system
Answer:	No
Question:	how tall is this saw/stand when folded / stored
Answer:	The table height from floor is 32.5". Its dimension is 27in x 32.5in x 13in. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

BOSCH 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand 4100XC-10

The Bosch 4100XC-10 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand delivers both professional rip capacity and outstanding portability for a tool that can get the job done, wherever it is. The powerful 15-Amp saw delivers 4.0 max HP for outstanding productivity. It also incorporates soft-start circuitry for smooth but quick ramp-up to the operating speed. It includes Constant Response circuitry to help maintain speed under load, restart protection to avoid accidental startup and overload protection. The SquareLock rip fence is engineered for maximum trueness and great ease-of-use. It includes an enhanced auxiliary fence for narrow workpieces. The lighter GTA47W Gravity-Rise Wheeled Stand has 8 In. treaded rubber-composite tires and a single-action design for easy set-up and transport. It is jobsite-ready with heavy-duty construction. The table saw provides a 30 In. x 22-1/2 In. tabletop with a 30 In. rip capacity for ripping 4 Ft. wide sheets goods in half.

Features

• Powerful table saw – has 15-Amp saw with 4.0 max HP and 3,650 rpm, for rip-cutting and cross-cutting of fine and rough materials
• Large cast aluminum top – provides increased work space and material support with a 30 In. ripping capacity
• Soft-start circuitry – manages intensity of motor start-up and minimizes the likelihood possibility of tripping a circuit breaker
• Constant Response circuitry – helps maintain speed under load
• Restart protection – helps to avoid accidental startup
• Portability – works seamlessly with the included lighter GTA47W Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down
• SquareLock rip fence – engineered for enhanced clamping and trueness
• Smart Guard System – riving knife and anti-kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut
• Onboard storage – allows for access to all included components

Product description

The Metabo HPT/Hitachi 324410 table insert (A) and 324411 table insert (B) are compatible with the following tools: C12LSH, C12RSH (sold separately).

• Same tools. New Name. Hitachi Power Tools has renamed to Metabo HPT
• Genuine OEM Metabo HPT/Hitachi Part
• Packaging and Origin of Manufacture May Vary
• Table Inserts are Compatible With the Following Tools: C12LSH, C12RSH (Sold Separately)
• Included Metabo HPT 324410 Table Insert (A) 324411 Table Insert (B)

Product description

You’re all about earning sweat equity, but to be efficient on the job, you need equipment that will work as hard as you. Good thing the PROTOCOL Equipment WS-077 Contractor Miter Saw Workstation always outperforms its competitors. Constructed of high-grade and corrosion-resistant, powder-coated steel, this stand has a 500 pound weight capacity and the adjustable tool mount brackets work with most brands of miter saws and other bench-top tools. The tool mounts have a sliding rail that lets you adjust the center of gravity of any mounted tool and create a steady foundation while cutting. The tubular, powder-coated steel legs are capped for use on finished surfaces and have quick-release levers for easy setup and take-down. One pair of legs feature fold-down storage brackets that can hold a variety of builder materials. The top width adjusts from 35-inches to 77-inches, allowing for an extensive workload. There's a convenient carrying handle and sturdy wheels that make transporting this workstation effortless.



PROTOCOL tools are designed to exceed the requirements of entry-level pro contractors and DIY customers shopping in select retailers.

• PORTABLE - Wheeled workstation with 2 extendable material supports and quick-release folding legs
• PROFESSIONAL GRADE STRENGTH - Made of high-grade steel that can support up to 500lb of material
• UNIVERSAL MOUNT - Adjustable tool mount brackets have 6-inch handles and work with most brands of miter saws
• ADJUSTABLE TOP WIDTH - Infeed and outfeed material supports adjust from a compact 35 inches to a maximum of 77 inches
• CAPPED FEET - Capped feet on each support leg allow use on finished surfaces without damaging them

User questions & answers

Question:	Will the toughbuilt equipment mounts work with this
Answer:	The clamping portion of the bracket is weak. When you grab the saw to make a cut you need to be aware of this.
Question:	Will this fit a Hercules 12" miter saw
Answer:	Thank you for your question! As long as your Hercules 12" miter saw has a 4 point connection system it will fit the PROTOCOL Equipment Contractor Miter Saw Workstation. Please feel free to reach out to us directly at PROTOCOL Equipment if you have any further questions.
Question:	Can I attach a bench top router table to this
Answer:	Yes if you mounted the router table to a piece of plywood and attached the clamp on brackets to the plywood you could. You will want a set of clamp in bracket for every tool you want to use on the stand. It only comes with one set
Question:	What is the weight capacity of this stand
Answer:	Hi A. Gorman, my name is Lindsey and I'm a PROTOCOL Equipment Online Sales Specialist. Thank you for your question! The PROTOCOL Equipment WS-031 Universal Workstation can hold up to 400 lbs. If you have any further questions you can contact us at [email protected]. Thank you!

Product features

PROTOCOL 67106 WS-077 Contractor Miter Saw Work Station

Everything is easier when you have a Protocol. The Protocol 67106 Contractor Miter Saw Work Station works with most brands of miter saws and other bench-top tools. The heavy-duty carry-handle with 2 solid core wheels make transport compact and easy. Features include: universal tool mount brackets with adapters, adjustable width from 35-inches to 77-inches, folding legs with quick release lever handles, 1/8-inch twin steel material support with stop, and capped feet and tubes.

Protocol 92778 5-In-1 Portable Miter Saw Work Station

Everything is easier when you have a Protocol. The Protocol 92778 5-In-1 Miter Saw Station is designed to quickly and securely mount to most work stands, work tables, or sawhorses. The unique mounting bracket can be used for mounting tools by using the quick disconnect clamps. The Protocol92778 Portable Work Station can even be used for convenient out-of-the-way storage of bench-top tools by mounting to a wall. Steel tube design provides maximum strength. Reverse lever loosens jaws in small increments.

Protocol 67105 WS-124 Professional Miter Saw Work Station

Everything is easier when you have a Protocol. The Protocol 97105 Professional Miter Saw Work Station works with most brands of miter saws and other bench-top tools. The heavy-duty carry-handle with 2 solid core wheels make transport compact and easy. Features include: universal tool mount brackets with adapters, built-in 3 outlet GFCI, folding legs with quick-release lever handles, adjustable width from 55-inches to 124-inches, capped feet and tubes, and 1/8-inch quad steel material support with stop.

Protocol 67107 WS-031 Universal Work Station

Everything is easier when you have a Protocol. The Protocol 67107 Universal Work Station design works with most brands of miter saw and other bench-top tools. The adjust able legs fold to a compact size for transport. Features include: universal tool mount brackets with adapters, tool mount carry handle, folding legs with quick-release lever handles, capped feet and tubes, and an adjustable leg height of 28-inches to 33-inches.

Product description

The DEWALT DW7451 compact table saw stand delivers the best of both worlds: solid construction for a safe work environment and a compact, folding design for easy transport and storage. Heavy-duty tube steel construction provides the strength you need for safe operation. Integrated support bar hardware holes for secure fastening of saw to the stand. This stand is lightweight; it folds flat for easy handling, storage, and transport. Designed for use with the DW7480 compact job site table saw, Dcs7485 60V table saw and DW745 compact table saw. Backed by a 3-Year limited warranty.

• Heavy-Duty tube steel construction provides the strength you need for safe operation
• Upport bar hardware holes for secure fastening of saw to the stand
• Lightweight; folds flat for easy handling, storage, and transport
• Designed for use with the DW7480 compact job site table saw, Dcs7485 60V table saw and DW745 compact table saw

User questions & answers

Question:	does anyone have instructions to put the saw on the stand? #dwe
Answer:	You can view or download instructions via https://servicenet.dewalt.com/Products/Detail?productNumber=DW7451
Question:	I have the dwe7490. what is the correct stand for that model
Answer:	You can order stand #N272401 online or via the following link: https://servicenet.dewalt.com/Parts/Detail/320318
Question:	Do the legs adjust for uneven ground
Answer:	No, the legs are not adjustable.
Question:	Do this stand is foldable pretty easy for transportation
Answer:	Yes, it folds up very easily. However, it is bolted to the table saw, and it will not fold when attached, (which is good thing when you are using it!). What I do, when I haul this table saw, is just lay it on its side (with the stand attached) in the bed of the truck. It saves me unbolting the stand to haul it, and bolting it together again to to use it at the job site. The table saw that fits this stand is very light, so moving or lifting it with the stand on is no problem.

Product features

DEWALT DW7451 Compact Table Saw Stand

The DEWALT DW7451 table saw stand delivers the best of both worlds: solid construction for a safe work environment and a compact, folding design for easy transport and storage. Featuring heavy-duty tube steel construction that can support the stress of tough saw jobs, this stand is designed for use with the DWE7480 (10" Compact table saw) DCS7485 (60V 8 1/4" Table Saw) and the DW7450 (10" Compact table saw). DEWALT DW745 10-inch compact job site table saw. Integrated support bar hardware holes make it easy to secure the saw to the stand for confident operation.