9 best craftsman miter saws

CRAFTSMAN V20 7-1/4-Inch Sliding Miter Saw Kit (CMCS714M1)

Craftsman

Based on 268 reviews Check latest price

Product description

This CRAFTSMAN V20 20V max* 7-1/4 in. Cordless sliding miter saw is powered by a powerful motor running at 3, 800 RPM designed for cutting 2x dimensional lumber, hardwoods, baseboard and trim with ease. The sliding 7-1/4 in. Blade allows for a cross cut capacity of up to 8 in. While the 9 Miter detents and single bevel blade allow for angled cuts. The lightweight design coming in at 21.8 lbs. Coupled with the side carry handles make this unit extremely portable. The LED light eliminates shadows and provides an accurate and easy Cut line to follow.

  • Part of the V20 cordless system
  • 7-1/4in. V20 20V max* miter saw has a powerful 3, 800 RPM motor for cutting 2x dimensional lumber, hardwoods, baseboard and trim with ease
  • Slide capacity allows for 8 in. Cross cut at 90 degrees and 5.5 in. Cross cut at 45 degrees
  • Capacity to cut 3-5/8 in. Nested Crown and 3-1/2 in. Baseboard vertically
  • Lightweight design at 21.8 lbs. With side carry handles make this unit extremely portable
  • 3 Year Limited Warranty, refer to "Warranty & Support" section below for full details

User questions & answers

Question: does this saw comes with a charger?? Thanks
Answer: Yes, the CMCS714M1 comes with a charger.
Question: I just bought a craftsman v20 cordless brad nailer kit, 18ga (cmcn618c1) the battery is compatible with this miter saw
Answer: Yes
Question: does this saw have a opional plug for a wall socket
Answer: It is as described, CORDLESS! This means it takes a V20 Battery. It's a great saw especially for working with moldings using miter cuts. The battery lasts all day and then some. I would have an extra battery just in case.
Question: How wide is the saw looking at it from the front
Answer: 21 "

Craftsman YH-MS029A Universal Miter Saw Stand with Adjustable Steel Rollers

Craftsman

Based on 50 reviews Check latest price

Product description

The Craftsman 9-16491 universal miter saw stand with adjustable steel rollers lets you take your work anywhere. The brackets of this universal stand fit most 10- and 12-inch miter saws, as well as other bench top tools, for hassle-free mounting and removal. This supportive stand offers a compact design that is easy to transport and store, and yet the support arms extend up to 80 inches to accommodate those longer work pieces. This Universal Miter Saw Stand lets you use your miter saw and other bench top tools just about anywhere. Break free from the chains of your workshop or garage, and bring your miter saw and other tools from job to job. This compact, portable stand weighs less than 25 pounds, so transporting it is never a hassle. Plus, it offers spring-loaded support legs that fold up for easy storage, taking you from workshop to truck to construction site and back again. Specifications & Dimensions : Depth (in.): 24 Height (in.): 37 Width (in.): 24 Product Overview: Foldable: Yes Item Weight (lbs.): 30 Type: Miter saw stands Storage: Load Rated To (lbs.): 330 Mobility: Portable Installation: Assembly Required: Fully Assembled Package Includes: Package Contents: Stand, Universal Mounting Brackets, Hardware.

  • Universal design means brackets fit most 10- and 12-inch miter saws and other bench top tools
  • Support arms extend up to 80 inches to accommodate longer work pieces
  • Weighs less than 25 pounds, so moving from job to job is never a burden
  • Weight Capacity: Supports up to 330 pounds
  • Two height-adjustable 11 1/2-inch smooth steel rollers help feed long work pieces

User questions & answers

Question: Will this fit a rigid 10 miter saw? The rear mount holes are 1/4" wider than the front mount holes
Answer: Yes they come with a nice container per set(2). I have a 4-wheel truck so it came with 2 containers, (2) sets. The containers will hold the rubber chain tightners also.
Question: Is there a wheel kit for this model
Answer: It is Always best to have chains on all wheels if your car/truck has 4wd. If you use them occacionaly just for a little extra traction on snow-coverd roads you'll manage with 2. Rear wheels on level terrain, front wheels up/downhill.
Question: Incredible), so how can the "product dimensions" be "52 x 12 x 10 inches"? What's the height please? Thanks
Answer: Yes, they do come with the tensioners, they work well as long as you have a little straight away for them to adjust themselves. I've used mine to get out of an icy mess, but the tensioners popped off. They cables stayed on long enough to unstick the truck, and get up the solid ice driveway.

Craftsman 0181010308 Table Saw Miter Guide Bar Bracket Genuine Original Equipment Manufacturer (OEM) Part

Check latest price

Product description

Genuine Original Equipment Manufacturer (OEM) parts! This miter guide bar bracket (part number 0181010308) is for table saws. Miter guide bar bracket 0181010308 attaches the guide bar to the miter base. Unplug the table saw before installing this part. For Craftsman.

  • This part is compatible with models including; 315218290,315218291
  • Miter guide bar bracket 0181010308 attaches the guide bar to the miter base
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Craftsman
  • This miter guide bar bracket (part number 0181010308) is for table saws
  • Unplug the table saw before installing this part

DEWALT 12-Inch Miter Saw, 15-Amp, Single Bevel, Compound (DWS715)

DEWALT

Based on 9 reviews Check latest price

Product description

The DW715 12 in. Single-Bevel Compound Miter saw is powered by a 15 amp motor to drive 4, 000 RPM, delivering Extended power and durability. Features stainless steel Miter detent plate and cam Miter Lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 5-1/2 in. Of base molding vertically and 5-1/2 in. Of crown molding vertically nested. Lightweight design and built-in carry handle for portability.

  • Power and durability: 15 amp, 4,000 Rpm motor
  • Miter detent plate improves productivity and ensures cutting accuracy: Adjustable stainless steel miter detent plate with 14 positive stops
  • Miter dentent override that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the Miter detents. Arbor size is 5/8 inches
  • Tall sliding fences that support crown molding up to 5 1/4 inch nested and base molding up to 6 1/2 inch vertically against the fence while easily sliding out of the way for bevel cuts
  • Cross cut capacity up to 2x8 inch dimensional lumber at 90° and a 2x6 inch dimensional lumber at 45°
  • Machined base fence support maintains fence perpendicularity with blade for cutting accuracy
  • Bevels to the left up to 48° and to the right up to 3°, with positive stops at 0°, 45° and 33.9° for cutting crown molding laying flat with 4 hardened steel bevel stops at 0°, 33.9°, 45° and 48° that delivers versatility at most common bevel angles
  • Includes a carbide blade, dust bag, blade wrench, vertical clamp and comfortable side handles in the base

User questions & answers

Question: Is the current model that is shipping type 1 or type 20. If you look up the parts diagram the type 20 has a different slide mechanism part number
Answer: I bought a new one today from a lumberyard and it is a Type 1. (says right on the sticker on the motor) Not sure if that means the slide mechanism is better or worse than the Type 20. I would assume it was made in 2014 because there is a "Dewalt use only" tag on the box which starts with 2014. Not sure if a "fresher" saw is a Type 20
Question: Can xps be added, i know dewalt makes a kit to add it to some saws, but this model was not listed
Answer: mmToolparts actually sells a kit (3 proprietary DeWalt parts + their wiring harness) for less than $70. They have videos on their website that show how to install the parts on DW716, DWS779, and DWS782 saws. You will need some additional tools (torx screw drivers or torx bits, wire strippers/cutter/crimper) and somewhat mechanically inclined. Just google "DWS779 xps light kit" and they should be the top result. This might be an easier option versus going to a DeWalt service center in the post pandemic world.
Question: Does this miter saw come with a laser or any guiding system
Answer: It does not come with any laser for guidance. You may find my answer a bit crude, I've been using miter saws for many years and the best guiding system I found to work is my/your eyes. Having lasers or no lasers you still need to use your eyes to get the work piece spot on near the cutoff point. Hope this helps!
Question: Is there an LED cut line
Answer: You can add the LED light to this saw. Not a laser but a shadow light that show exactly where the saw blade will cut. I just did it last night. Parts can be had for about $70. This basically turns it into a model 780 which is much more expensive. Pretty simple to add.

CRAFTSMAN Chop Saw, 15-Amp, 14-Inch (CMEM2500)

Based on 20 reviews Check latest price

Product description

15 Amp 14-in. Chop saw provides the power and capacity to maintain performance and durability on the jobsite. Saw features an extra-wide, solid steel base that offers stability when cutting longer materials. For ease of the user The lightweight design allows for easy storage and portability.

  • 15 amp 14-in. Chop saw provides the power and capacity to maintain performance and durability on the jobsite. Saw features an extra-wide, solid steel base that offers stability when cutting longer materials. For ease of the user The lightweight design allows for easy storage and portability.
  • Overload capacity: High performance 15 amp motor delivers a high overload capacity with 3800 RPMs
  • Added convenience: spindle lock allows the user The convenience to change the cutting wheel quick and easy
  • Maximum user protection: Heavy duty guard for maximum user protection
  • Quick-release: quick-release material Clamp allows for easy material cutting & removal

User questions & answers

Question: does this have a Quick-Change blade change system lets users change wheels without a wrench
Answer: This specific chain does not fit just any 18" or 20" tire size !!! Please keep in mind that there are three (3) different measurements to determine tire size. There is the width, the height from rim to tread and the wheel diameter. A change in any one of these can affect the size of a chain that will fit. You must go to the chain manufacturer's sizing chart with your exact tire size and look for the chain that will fit that specific tire. Never try to place chains on tires they were not designed to fit as it could be very dangerous and cause possible damage to your vehicle. Check out the Amazon.com Snow Chain Buying Guide for even more info.

Craftsman X3QB Miter Saw Screw Genuine Original Equipment Manufacturer (OEM) Part

Check latest price

Product description

Genuine Original Equipment Manufacturer (OEM) parts! This screw (part number X3QB) is for miter saws. Follow appropriate safety practices when installing screw X3QB. For Craftsman.

  • This part is compatible with models including; 137212360,137212361,137212410
  • Follow appropriate safety practices when installing screw X3QB
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Craftsman
  • This screw (part number X3QB) is for miter saws

Craftsman 511U03050 Miter Saw Handle Assembly Genuine Original Equipment Manufacturer (OEM) Part

Based on 7 reviews Check latest price

Product description

Genuine Original Equipment Manufacturer (OEM) parts! This handle assembly (part number 511U03050) is for miter saws. Handle assembly 511U03050 contains both sides of the handle. Unplug the miter saw before installing this part. For Craftsman.

  • This part is compatible with models including; 315212130,315212240,315212340,315285260,315243130,315212500,315243150
  • This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including; S51101100,511309000
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Craftsman
  • This handle assembly (part number 511U03050) is for miter saws
  • Unplug the miter saw before installing this part

User questions & answers

Question: will this fit craftsman 10 in miter model
Answer: They are universal fit. I pretty sure they will fit they fit my truck 270/75R18
Question: Will this handle work on model number 137.21290? The part number for the handle I need is #511309000 but it says discontinued when searching elsewhere
Answer: Yes
Question: Does this come with the switch
Answer: They don't work on solid rims

Craftsman A45204040080 Miter Saw Parallel Key Genuine Original Equipment Manufacturer (OEM) Part

Based on 1 reviews Check latest price

Product description

Genuine Original Equipment Manufacturer (OEM) parts! This part fits the following models and brands: Craftsman miter saw: 315212010, 315212350, 315212740 For Craftsman.

  • This part is compatible with models including; 315212350,315212010,315212740
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Craftsman
  • This part fits the following models and brands: Craftsman miter saw: 315212010, 315212350, 315212740

Craftsman 0182010207 Table Saw Miter Gauge Locking Clamp Genuine Original Equipment Manufacturer (OEM) Part

Check latest price

Product description

Genuine Original Equipment Manufacturer (OEM) parts! This miter gauge locking clamp (part number 0182010207) is for table saws. Miter gauge locking clamp 0182010207 locks and holds the miter gauge in position. Unplug the table saw before starting the repair. Wear work gloves to protect your hands. For Craftsman.

  • This part is compatible with models including; 315218290,315218291
  • Miter gauge locking clamp 0182010207 locks and holds the miter gauge in position
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Craftsman
  • This miter gauge locking clamp (part number 0182010207) is for table saws
  • Unplug the table saw before starting the repair

Latest Reviews

View all