9 best dewalt dw788 scroll saw

Product description

Double parallel link arm design dramatically reduces vibration and noise, for extremely accurate cuts. Exclusive tool-free blade clamps, On-off switch, electronic variable speed, flexible dust blower and blade-tensioning lever are all located on the front upper arm. Arm design pivots from the back of the saw to the front and lifts so blade can be easily threaded through the material for inside cuts. Unique arm design keeps the blade perpendicular to the work. Oversized, cast-iron table provides excellent material support and bevels 45 degrees left and right. Specs: Motor 1.3 amp rating, 120V AC. 400-1,750 cutting strokes per minute. Table size 16" x 23-3/4". Weighs 56 lbs. Meets OSHA standards, CSA approved and U.L. Listed. Stand Not Included . Featured length of the flexible shaft is approximately 22 inches long

The dependable DEWALT 20-Inch Variable-Speed Scroll Saw is designed to help you create accurate, detailed workpieces with ease. Its user-friendly configuration with easy-to-access controls, reduced-vibration design, and variable-speed performance allow for incredible precision. For added convenience and durability, an integrated cast-iron table provides material support, and a flexible dust blower helps keep your work area pristine.

Unique Arm Design for Accurate Cuts

A scroll saw needs to perform both reliably and accurately, whether you're crafting custom jigsaw puzzles or designing unique trim pieces. This DEWALT scroll saw's double parallel-link arm design helps it deliver on both fronts by reducing vibration. The specially designed arm pivots from the back of the saw to the front, shortening the distance that the arm needs to move and allowing for smoother, quieter saw operation. With less vibration, you can produce accurate cuts with ease.

This unique arm design also works to keep the saw's blade perpendicular to whatever you're working on, reducing the chance of over cutting or under cutting.

Easy to Handle with Variable-Speed Control

Adding to the saw's intuitive, design are convenient controls engineered by DEWALT to keep your workflow smooth. The saw's on-off switch, speed control, and blade-tensioning lever are all located within easy reach on the front, upper arm. The saw's flexible dust blower is also located on this portion of the arm so it can easily be directed where you need it, keeping your work surface clear of unwanted debris.

The scroll saw's electronic variable-speed control allows you to make quick, accurate adjustments and utilize speeds ranging from 400 to 1,750 strokes per minute. The saw relies on a dependable 1.3 Amp motor for the power you need and delivers a variable stroke length between 3/4 inch and up to 2 inches deep. This application-specific performance translates to improved control and cleaner results.

Save Time with Tool-Free Blade Changes and Adjustable Table

Whether you're working with a variety of specialty materials or you're simply ready for a more aggressive cut, the DEWALT exclusive, tool-free blade clamps allow you to complete blade changes in just seconds. And the arm is easy to lift, making it easy to thread the blade through materials when making inside cuts.

Weighing 56 pounds, this scroll saw has a heavy-duty feel yet is small enough to move around the shop easily. The saw's oversized, cast-iron table provides excellent support no matter what you're working on, and the table bevels 45 degrees to the left and 45 degrees to the right for added versatility.

This 20-inch variable-speed scroll saw comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DEWALT 20-Inch Variable-Speed Scroll Saw, hex wrench, and blades.

• Double parallel link arm design dramatically reduces vibration and noise for extremely accurate cuts
• Exclusive tool free blade clamps allow blade changes in seconds. Depth of Cut (inches): 2 inch
• On off switch, electronic variable speed, flexible dust blower, and blade tensioning lever all located on front upper arm
• Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation
• Arm lifts so blade can be easily threaded through the material for inside cuts

User questions & answers

Question:	Does this saw come with the stand
Answer:	no stand comes with the saw check out harbor freight thats where i purchased my stand and light for about $75which work very well but i did have to use a 2x12 board to mount to the stand.
Question:	How thick of a hardwood piece can this cut with ease
Answer:	The thickest that I have cut is about an inch and a quarter hardwood, had no problem, I believe you could even thicker if you took your time and not push it real hard and use sharp blades! Hope this helps !!
Question:	Has anyone used this saw for pinewood derby cars? Is it powerful enough
Answer:	I would say no. This saw is designed for small flat wood. To cut out pinewood derby cars I would suggest a nice bandsaw.
Question:	How can I tell if my 788 is made in Canada or in Asia
Answer:	Your can contact DeWalt at 1 800 433 9258DeWalt is now a popular brand of tools for commercial contractors. In 2002, DeWalt ceased all tool manufacturing in the USA and moved manufacturing to China, Mexico, Thailand, Japan and Korea. In 2004, Black and Decker bought rival power tool manufacturer Porter-Cable and combined it with DeWalt in Jackson, Tennessee.

Product features

DEWALT DW788 1.3 Amp 20-Inch Variable-Speed Scroll Saw

The DW788 20" Variable-Speed Scroll Saw operates quietly and smoothly for accuracy. The tool-free blade clamp allows for quick and easy blade changes. Convenient placement on the liftable arm of the dust blower, power switch, and saw adjustments on the front of the upper arm provide for easy adjustment. Oversized, cast-iron table provides excellent material support and has the ability to bevel to both the left and right.

Product description

This DEWALT scroll stand is a great accessory to have when you don’t have a lot of work bench space and you’re looking for a sold surface for you DEWALT DW788 scroll saw. Ruggedly crafted with holes at the base so you can bolt the stand to the floor, this stand is built to last in even heavy duty applications. It’s built from all metal can be simply orientated to the height you need with the rear adjustable legs.

From the Manufacturer

DEWALT DW7880 Scroll Saw Stand

• Sturdy, lightweight stand
• Robust all-metal construction
• Adjustable legs allows height adjustment for optimum comfort

User questions & answers

Question:	I am buying the dewalt 788 scroll saw in looking at this stand i find i cannot sit at it. can anyone recommend a stand brand that i can sit at
Answer:	Not sure why you would use a mask on the laser cutter. This is a temporary adhesive. I have used it while cutting .75-1.0 inch thick hardwood and the blade gets very hot. I had no issues removing the product due to the heat but I also control my speed to avoid burning so this is no where near your temperatures.
Question:	Will this work with wen scroll saw 24x11x
Answer:	Probably not. It’s sticky on one side to apply it to the wood, then the paper is peeled off the other side to attach the pattern. The sticky side won’t go through your printer.
Question:	I ordered through Amazon. It didn't have any bolts in the box (which was damaged upon arrival). If you ordered through Amazon did you get bolts
Answer:	not exactly sure, as long as the wood i apply it to is good n smoothe n dust free it does good holding my patterns to the wood while im scrollsaw cutting, i would say try it with a small scrap piece first and see how it does for you.
Question:	Can anyone tell me what the assembled height (floor to table) is for the scroll saw when it is mounted on this stand
Answer:	Sorry the Lifter will not work on the Delta 40-694. It only works on the Dewalt 788 and the Delta 40-690. The Delta 40-694 has a built in mechanism for holding the saw arm in the up position. Frank - Papa's Workshop
Question:	Do these fit any scroll saw
Answer:	The Dewalt scroll saw arm will not stay in the UP (raised) position by itself. This makes it difficult to move your blade to a new position for an different interior cut in your project. The LIFTER is an accessory for the scroll saw that allows you to latch the saw arm in the UP position when you need to. Then you just unlatch the LIFTER and lower the saw arm so you can continue to make cuts in your pattern. Many folks, including myself, used to prop up the saw arm with a block of wood. Now we don't have that problem anymore. Thanks Frank Carey - Papa's Workshop
Question:	Can i order just the number 5 one
Answer:	Bill, thanks for the question. What you're suggesting does work - sorta. Here's my thoughts. When you tighten the screw enough to hold up the arm, then there is added resistance when you want to lift the arm. Also when you want to lower the arm you have to also overcome the added resistance. So it does require extra effort on your part to raise and lower the saw arm. Granted if you don't set it too tight, it doesn't take a lot of muscle to raise and lower the arm. But if you're doing a lot of fretwork you'll be raising and lowering the arm a lot. So the extra effort gets kinda old after a while. I tried that method a long time ago and found I didn't care for it. If you make it too tight then the resistance is worse and if you make it too loose then the arm won't stay up. I think I was on a forum some time ago and someone said not to use that method on the Dewalt 788. Sorry but I don't remember which forum. One of the benefits of the Lifter is that it has no added resistance to the raising and lowering of the arm. The Lifter has about 95 reviews on Amazon and about 93 on my Papa's Workshop website. Almost all of them are 5 STAR reviews. If you have any questions please let me know. Thanks - Frank
Question:	do they fit the dewalt
Answer:	Tamara, I can't answer that Yes or No. In my personal opinion I don't think it would since it doesn't affect the operation of the saw in any way. However, that is just my opinion. You might contact Dewalt Tech Support and see what they say. Here's a number that I found - 1-800-4-dewalt.
Question:	What are the tpi for each number? I find they vary according to manufacturer and would like to know if possible
Answer:	I have the "Smoke" ones and they have been fine in the rain.

Product description

Designed for use with the DW788 scroll saw, the DeWalt DW7881 scroll saw work light makes it easy to keep your work area well-lit for improved visibility, accuracy, and safety. Featuring a flexible-neck design that allows you to have complete control over positioning and a three-wire grounded plug, this light is durable and easy to mount. The work light comes with a 25-watt bulb.

From the Manufacturer

DEWALT DW7881 Scroll Saw Work Light

• Included Components: Unit, Instruction Guide

User questions & answers

Question:	Is this the newer version? Apparently there is an improvement to this item that makes it more likely to stay where it is positioned
Answer:	medium brown
Question:	What type of bulb, it said "intermediate" base?? what size is that
Answer:	Toe box on Veronica is about same size but shape is more pointy. Soles are not grippy like engineer
Question:	what are the electrical properties of the bulb
Answer:	I just received these boots within the last two weeks. I own several pair of Frye boots, shoes and sandals which have been bought at various retail stores and directly from Frye as well as Amazon. I have actually ordered 3 different Frye sandals/boots/shoes from Amazon and every time I have ordered, they have been the Frye quality I expect.
Question:	What type of bulb does the DW7881 lamp take
Answer:	On my pair of 8.5’s, they are 16.5 inches from the bottom of the boot. I hope this helps.
Question:	Hello, I'de like to buy this product. Is it possible to send it to France ( Paris ) Thanks
Answer:	15" around, but there are also 2 elastic gores, 1 on either side of the back seam.
Question:	Can this be used to mask laser cut pieces
Answer:	The calf measures 16", but l got the extended version. They were a little tight at first but after wearing for a while they fit well with skinny jeans and were quite comfortable.
Question:	Can I run this through my Inkjet printer
Answer:	i'm not sure how long of a period of time you have in mind, but i've spent a half day out in the snow with these and was dry throughout. i've used them in some rain storms too, and as long as the puddles don't go above the leather, you're left nice and dry!
Question:	Could this be used to hold layers of veneer together while cutting
Answer:	I don't know that there is a rating, but toes seem to get cold easily in most rubber boots. These are nice boots, and look great, but I wouldn't wear them in temps much below freezing for long. Also, I have many boots, but these are some of the heaviest I own. Excellent lug sole for traction in snow.

Product description

Genuine Original Equipment Manufacturer (OEM) parts! This air nozzle (part number 286311-00) is for scroll saws. Air nozzle 286311-00 directs air from the bellow to the work surface to blow away sawdust. Unplug the saw before installing this part. For Dewalt.

• This part is compatible with models including; DW788 TYPE 1,DW788 TYPE 2
• Air nozzle 286311-00 directs air from the bellow to the work surface to blow away sawdust
• Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Dewalt
• This air nozzle (part number 286311-00) is for scroll saws
• Unplug the saw before installing this part

Product description

This is an O.E.M. authorized part. Fits various BLACK AND DECKER models. OEM Part Number 514009998.The product is manufactured in United States.

• This is an O.E.M. authorized part
• Fits various BLACK AND DECKER models
• OEM Part Number 514009998
• This is a DEWALT replacement part
• Part Number 514009998
• This is an O.E.M. part

Product description

This is an O.E.M. authorized part. Fits various BLACK AND DECKER models. OEM Part Number 28630300.The product is manufactured in United States.

• This is an O.E.M. authorized part
• Fits various BLACK AND DECKER models
• OEM Part Number 28630300
• This is a DEWALT replacement part
• Part Number 28630300
• This is an O.E.M. part

User questions & answers

Question:	Will these fit a craftsman scroll saw and how many come in a pack
Answer:	This product is just sanding belts that fit a 1/2" width by 18" overall length belt sander. There is no sander motor included with this product. They are just using the sander in the picture as a reference. These are some of the best sanding belts you can buy. They hold up very well to metal sanding. I use them to do autobody work on vehicles.
Question:	What size of threads does this have
Answer:	This item is a pack of the abrasive belts. Our belt grinder is an air power tool. There may be an electric powered tool available.

• Integrated XPS cross cut positioning system for better accuracy and visibility
• Adjustable stainless steel miter detent plate has 10 positive stops
• Designed for cordless miter saws
• Ultra sharp optimized carbide tips

User questions & answers

Question:	How well does this saw collect dust hooked up to an extractor
Answer:	1/4" and 3/8" drive
Question:	Does this saw have a laser line
Answer:	No, they come on a plastic rail.
Question:	Is this saw tough enough to be used on a full time daily basis for installing trim
Answer:	Gearwrench warranty cover defects in material and workmanship, not normal wear and tear, misuse or abuse. If it's after the 30 days that you can return to Amazon you can contact [email protected]
Question:	Does this saw also have a 120v AC option? (cord
Answer:	Part # for 15mm is 84573N and is included in this set.
Question:	Is the saw have a single or double bevel
Answer:	If it's past the 30 days that you can return to Amazon, you would need to contact [email protected]
Question:	Does this tool take 1 or 2 60 volt batteries
Answer:	Set Includes: 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-1/4" Deep Impact Socket and 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 26mm and 27mm Deep Impact Sockets. This information is direct from the Gearwrench website.
Question:	Will the 20v max batteries work with this saw? will they make the blade spin at all
Answer:	10 to 19
Question:	se puede cargar la batería con un transformador 220V/110V
Answer:	8mm thru 22mm
Question:	i bought a new hitachi-c10fch2-10-inch miter saw with laser. i mist placed the manual. could i buy a new one from you
Answer:	If ordered from Amazon and it falls under the time frame they allow, you would return to Amazon for replacement. If you can no longer return to Amazon, you would have to request a return authorization from Apex Tool Group and return for evaluation for replacement. Gear Wrench is not Lifetime Warranty..it's Limited Lifetime Warranty and is warranted against defects in material and workmanship.
Question:	how thick of wood can this cut
Answer:	no mine did not come with case
Question:	Can you cut metal with this saw? If so what blade do I need
Answer:	No
Question:	Is the laser worth an extra $20 for occasional hobbies and work around the house; e.g. replacing a deck board or building a kids playhouse
Answer:	Its a little loud for as small as it is, but for this most part its not terrible. If I had to rate the noise on a scale of 1 to 10 I would put it at a 4

Product features

Laser Marker System

For increased cutting accuracy

Thumb Actuated Positive Stops

Easy to use for quick miter adjustments

Large Pivoting Flip Fence

Raises 4" for cutting crown molding vertically

Horizontal Handle

With soft, vibration reducing elastomer grip which adds comfort and control

120V MAX 12'' Corded/Cordless Miter Saw

● Ultimate power flexibility providing the convenience of cordless with the performance of corded

● A powerful 120V brushless motor provides long run-time compared to brushed motors

● Integrated adjustment-free Cutline Blade Positioning System for accuracy and visibility

● High visibility bevel scale makes bevel angle adjustments accurate and easy

● Tall sliding fences support crown molding up to 7-1/2" nested and base molding up to 6-3/4" vertically against the fence

● Adjustable stainless steel miter detent plate with 11 detents, 60 degrees to the right and 50 degrees to the left providing increased capacity

*Sliding features only applicable to sliding miter saw

INTRODUCING FLEXVOLT

The world’s first battery that automatically changes voltage when you change tools.

THIS IS NEXT LEVEL POWER

The FLEXVOLT system brings you the future of power with cordless tools unlike anything you’ve ever experienced. With a highly innovative voltage-changing battery and a lineup of groundbreaking 60V MAX* and 120V MAX* tools to match, FLEXVOLT tools have the power that will change the way work gets done.

THE TECHNOLOGY THAT GETS IT DONE

The FLEXVOLT battery’s ability to automatically change between two voltages gives users a serious advantage when it comes to efficiency. It’s the battery that not only powers, but improves the run-time of our DEWALT 20V MAX* tools, so you don’t have to invest in a whole new system. It’s the battery that brings the power of corded to a new lineup of 60V MAX* and 120V MAX* DEWALT tools so you can finally work on a fully cordless jobsite. This revolutionary battery will change the way things get done.

ONE BATTERY. TWO VOLTAGES.

The FLEXVOLT battery is backwards compatible with our 20V MAX* tools so you get up to 4x the run-time. And because the FLEXVOLT battery is the only battery that automatically changes voltages when you change tools, you can slide the battery into a whole new lineup of 60V MAX* and 120V MAX* tools from DEWALT.

Product description

This is an O.E.M. authorized part. Fits various BLACK AND DECKER models. OEM Part Number 28634400.The product is manufactured in United States.

• This is an O.E.M. authorized part
• Fits various BLACK AND DECKER models
• OEM Part Number 28634400
• This is a DEWALT replacement part
• Part Number 28634400
• This is an O.E.M. part

Product description

After nearly 90 years of expertise in the woodworking business, DELTA Power Equipment Corporation (DELTA PEC) has become one of the most revered brands in woodworking tools today. DELTA Power Equipment Corporation focuses on innovations to help the woodworker create masterpieces easier and with more precision. The company designs, manufactures and distributes a variety of stationary woodworking tools including electric table saws, band saws, radial arm saws, scroll saws, drilling machines, jointers, planers, mortisers, lathes, grinders and dust collectors for the professional and advanced woodworking markets.

Motor: 1.3 Amp



Speeds: 400-1,750 SPM



Capacity: 20 in.



Stroke Length: 3/4 in.



Table Size: 16 in. x 24 in.



Table Tilt: 0°-45°, Left and Right



Cutting Capacities: at 90°: 2 1/8 in. at 45°: 1 5/8 in.



Assembled Depth: 39 in.



Assembled Width: 16 in.

• Electronic variable speed can be adjusted from 400-1,750 SPM for a wide array of cutting applications
• Dual parallel link arm design reduces vibration reducing over and under cutting improving accuracy and quality
• Upper arm lifts and locks in the raised position during blade changes or while adjusting blade position for fret work
• Tool-free blade clamp allows for quick, easy blade changes in seconds. Bevels 0° - 45° left and right. Motor: 1.3 Amp
• On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever are all conveniently located up front on the arm for easy accessibility
• On-tool blade storage area provides neat, organized protection for scroll saw blades, includes 2 straight blades

User questions & answers

Question:	Does this saw come with a stand
Answer:	NO! Even though Delta and DeWalt are very similar, The DeWalt stand has to be adapted to fit the Delta saw. Takes a few minutes.
Question:	What is the 'thing' on left side? How easy to change blade, need a tool? Disappointed no light, any available
Answer:	That black tube thing on the left is an adjustable hose that blows puffs of air (generated I think from the up and down motion of the upper arm) which will help keep your lines clear of sawdust. Changing blades is a snap, simply loosen the thumb / wing screw on the top arm and the lower holder and slide out the blade. As for the light, I make due with a shop lamp that I have hanging from the ceiling of my garage. You can check woodcraft or rockler for magnetic portable lamps that may stick to the saw somewhere - not sure if its magnetic everywhere, never tried
Question:	The saw is great but I can not get the hold down to stay in place. I move the wood and it also moves. Any thoughts
Answer:	I removed mine even though it held just fine as I found that it got in my way. This was after I'd gotten used to the saw and the forces involved. I haven't had an issue using it without the hold down, but you have to do the holding down.
Question:	There's such a price difference, what's the main difference between this saw and the dewalt dw
Answer:	Only difference is some of the outside sheet metal, the inner workings are the same. You are paying for the Dewalt name. They both used to owned by the same company.

Product features

LOW VIBRATION, HEAVY DUTY CONSTRUCTION

The Dual parallel-link arm reduces vibration and noise. Keeping the blade perpendicular to the work surface Dramatically reducing over or under cutting, improving accuracy and cut quality. This low vibration scroll saw improves user sensitivity allowing you to make more precision cuts

LOW VIBRATION & BUILT TO LAST

The Dual parallel-link arm reduces vibration and noise. Keeping the blade perpendicular to the work surface Dramatically reducing over or under cutting, improving accuracy and cut quality. This low vibration scroll saw improves user sensitivity allowing you to make more precision cuts

LOADED WITH FEATURES

Electronic variable speed can be adjusted from 400-1,750 SPM providing you ultimate control. The upper arm lifts and locks in the raised position during blade changes or while adjusting the blade position for fret work. On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever are all conveniently located up front on the arm for easy accessibility, while the tool-free blade tensioning allows for quickly adjusting the blade to the proper tension which maximizes blade life and accuracy

LOADED WITH FEATURES

Electronic variable speed can be adjusted from 400-1,750 SPM providing you ultimate control. The upper arm lifts and locks in the raised position during blade changes or while adjusting the blade position for fret work. · On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever are all conveniently located up front on the arm for easy accessibility, while the tool-free blade tensioning allows for quickly adjusting the blade to the proper tension which maximizes blade life and accuracy

ENORMOUS CAPACITY

Huge 20 inch x 2-1/8 inch Capacity with a 24 inch x 16 inch table allow you to handle the large projects. A 3/4 inch stroke allows this saw to cut aggressively for those nice clean cuts.

HUGE CAPACITY

Huge 20 inch x 2-1/8 inch Capacity with a 24 inch x 16 inch table allow you to handle the large projects. A 3/4 inch stroke allows this saw to cut aggressively for those nice clean cuts.

AND MUCH MORE