12 best mitre saws
A miter saw, also known as a mitre saw, is a versatile power tool commonly used in woodworking and construction for making precise crosscuts and miter cuts at various angles. These saws are essential tools for professionals and DIY enthusiasts alike. Here's what you should know about miter saws:
Basic Function: A miter saw is designed to make accurate and angled cuts in wood, plastic, or other materials. It is known for its ability to create compound cuts, which include both a miter (angled) cut and a bevel (tilted) cut simultaneously.
Types of Cuts:
- Miter Cut: A miter cut is made by angling the blade and cutting across the width of the workpiece, creating an angled edge.
- Bevel Cut: A bevel cut is made by tilting the blade at an angle to make a slanted cut through the thickness of the material.
- Compound Cut: A compound cut combines both miter and bevel cuts, allowing you to create complex angles and joints.
Components:
- Blade: Miter saws typically have a circular saw blade with sharp teeth designed for clean and precise cuts.
- Base: The base or table of the saw provides support for the workpiece and can rotate for making miter cuts.
- Fence: A fence helps guide the workpiece and ensures straight and accurate cuts.
- Miter Gauge: This gauge allows you to set the desired angle for miter cuts.
- Bevel Adjustment: The bevel adjustment feature enables you to tilt the blade to make bevel cuts.
Types of Miter Saws:
- Compound Miter Saw: These saws can make both miter and bevel cuts, making them versatile for various woodworking projects.
- Sliding Compound Miter Saw: These saws have a sliding arm that allows you to cut wider workpieces.
- Single Bevel Miter Saw: These saws can tilt the blade in one direction only, usually to the left.To make bevel cuts in the opposite direction, you need to flip the workpiece.
- Dual Bevel Miter Saw: Dual bevel saws can tilt the blade in both directions, making it easier to create complex bevel cuts without flipping the workpiece.
Applications: Miter saws are commonly used for tasks such as:
- Cutting moldings and trim for woodworking projects.
- Framing construction for precise angle cuts.
- Making crosscuts for accurate and square joints.
- Creating compound cuts for picture frames, door frames, and other joinery.
Safety Precautions: When using a miter saw, it's crucial to follow safety guidelines, including wearing appropriate safety gear, securing the workpiece, and keeping hands clear of the blade.
Miter saws are valuable tools for professionals and DIYers looking to make precise and angled cuts in various materials. The choice of miter saw type depends on the specific needs of your projects, so it's essential to consider the types of cuts you'll be making and the materials you'll be working with when selecting the right miter saw for your workshop.
Below you can find our editor's choice of the best mitre saws on the marketProduct description
The Metabo HPT C10FCGS 10-inch Compound Miter Saw is lightweight for easier transport. The 15 amp motor generates a no-load speed of up to 5000 RPM for making crosscuts and miter cuts with ease. This miter saw offers a bevel range of 0-45 degrees to the left to provide clean and accurate bevel cuts. It is designed for woodworkers who demand precision, reliability and versatility on the job.
- 10" Compound Miter Saw
- MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM
- LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability
- MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility
- BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts
- LARGE TABLE: Offers better material support with vice clamping system to secure work piece
- THUMB ACTUATED POSITIVE STOPS: For quick miter adjustments
User questions & answers
Question: | Does this take any 10” blade |
Answer: | Yes, it will take any 10" blade with a 5/8" arbor. |
Question: | does this come ready to use or is assembly required |
Answer: | Hi there, there is a small amount of assembly required. Please refer to the owner's manual for setup instructions. Hope this helps! |
Question: | Is the depth of cut adjustable |
Answer: | Depth can't be adjusted on this model number. You will need a sliding compound miter saw. |
Question: | According to the instruction manual, the item includes a 10mm box wrench to tighten the nylon nut M6 for the sub fence installation. I used my own too |
Answer: | Yes, but using yours is fine. Theirs is included simply for convenience if you didn't have one. |
Product features
45 Degree Bevel Range
To the left to provide clean and accurate bevel cuts
Horizontal handle
For a secure hold
15 Amp motor
Delivers high power for the toughest cutting jobs
Large table
for better material support with vice clamping system to secure work piece
Product description
The DW715 12 in. Single-Bevel Compound Miter saw is powered by a 15 amp motor to drive 4, 000 RPM, delivering Extended power and durability. Features stainless steel Miter detent plate and cam Miter Lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 5-1/2 in. Of base molding vertically and 5-1/2 in. Of crown molding vertically nested. Lightweight design and built-in carry handle for portability.
- Power and durability: 15 amp, 4,000 Rpm motor
- Miter detent plate improves productivity and ensures cutting accuracy: Adjustable stainless steel miter detent plate with 14 positive stops
- Miter dentent override that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the Miter detents. Arbor size is 5/8 inches
- Tall sliding fences that support crown molding up to 5 1/4 inch nested and base molding up to 6 1/2 inch vertically against the fence while easily sliding out of the way for bevel cuts
- Cross cut capacity up to 2x8 inch dimensional lumber at 90° and a 2x6 inch dimensional lumber at 45°
- Machined base fence support maintains fence perpendicularity with blade for cutting accuracy
- Bevels to the left up to 48° and to the right up to 3°, with positive stops at 0°, 45° and 33.9° for cutting crown molding laying flat with 4 hardened steel bevel stops at 0°, 33.9°, 45° and 48° that delivers versatility at most common bevel angles
- Includes a carbide blade, dust bag, blade wrench, vertical clamp and comfortable side handles in the base
User questions & answers
Question: | Is the current model that is shipping type 1 or type 20. If you look up the parts diagram the type 20 has a different slide mechanism part number |
Answer: | I bought a new one today from a lumberyard and it is a Type 1. (says right on the sticker on the motor) Not sure if that means the slide mechanism is better or worse than the Type 20. I would assume it was made in 2014 because there is a "Dewalt use only" tag on the box which starts with 2014. Not sure if a "fresher" saw is a Type 20 |
Question: | Can xps be added, i know dewalt makes a kit to add it to some saws, but this model was not listed |
Answer: | mmToolparts actually sells a kit (3 proprietary DeWalt parts + their wiring harness) for less than $70. They have videos on their website that show how to install the parts on DW716, DWS779, and DWS782 saws. You will need some additional tools (torx screw drivers or torx bits, wire strippers/cutter/crimper) and somewhat mechanically inclined. Just google "DWS779 xps light kit" and they should be the top result. This might be an easier option versus going to a DeWalt service center in the post pandemic world. |
Question: | Does this miter saw come with a laser or any guiding system |
Answer: | It does not come with any laser for guidance. You may find my answer a bit crude, I've been using miter saws for many years and the best guiding system I found to work is my/your eyes. Having lasers or no lasers you still need to use your eyes to get the work piece spot on near the cutoff point. Hope this helps! |
Question: | Is there an LED cut line |
Answer: | You can add the LED light to this saw. Not a laser but a shadow light that show exactly where the saw blade will cut. I just did it last night. Parts can be had for about $70. This basically turns it into a model 780 which is much more expensive. Pretty simple to add. |
Product description
You'll find saws for multiple applications. Select from 15 in. And 20 in. Hand saws, a 10 in. Fine-finish hand saw for cutting wood, plastic, and laminate, 12 in. Hacksaw, and for those precision cuts, an adjustable Miter box and clamping Miter box both complete with saws.
- Cam-shaped pins twist and lock with honeycomb base to secure work for accurate cuts
- Cuts mitres on 45° and 90° angles, face angle 45° and 22.5&Deg; angle for octagonal shapes
- Extended lip on base holds mitre box in place while cutting and a built-in saw stop helps prevent cutting into mitre box
- Molded-in storage bins to hold CAM pins and pencil
- 1 Year Limited Warranty, refer to "Warranty & Support" section below for full details
User questions & answers
Question: | Is this good for coping baseboards |
Answer: | Dear Customer, it only use for 110v(US voltage). Thank you. |
Question: | Will this cut PVC pipe |
Answer: | None that I know.off. And they dont offer to see you a backup battery by itself |
Question: | can this cut 30 degree angles |
Answer: | https://www.amazon.com/dp/B07PWBVQX2 It's where I found one. |
Question: | What is the TPI for the saw cutting blade |
Answer: | Dear Customer, So sorry for this misunderstanding. This package includes one charger and one battery. 5 Batteries in list means 5 electric cell. We will update our description to avoid this misunderstanding happening again. Thank you so much for your support. Regards, Hawkforce Customer Service Team |
Product description
The DEWALT DWS779 12" Sliding compound Miter saw features a powerful 15 amp, 3,800 RPM motor that delivers extended power and durability. It has a super-efficient dust collection system that captures over 75 percent of dust generated. This miter saw also offers an exclusive back fence design which cuts up to 2x14 dimensional lumber at 90° and 2x12 at 45°.
- Your purchase includes: 1 CDEWALT DWS779 sliding compound cord miter saw, 12-inch, carbide blade, 1 blade wrench
- Tool dimensions: 17” H x 24.75” L. Tool weight: 56 pounds; Maximum cutting thickness: 6.75 inch
- Other specifications: 15 Amps, 12” blade diameter, 5/8” or 1” Arbor size. 3800 RPM motor. Type of milter saw: Slide
- Exclusive back fence design cuts up to 2x14 dimensional lumber at 90 degree and 2x12 at 45 degree. Miter saw does not come with LED (sold separately) or laser cutting guide
- Super-efficient dust collection system captures over 75 percent of dust generated
- Backed by Dewalt's 3 year limited warranty
User questions & answers
Question: | Is the current model that is shipping type 1 or type 20. If you look up the parts diagram the type 20 has a different slide mechanism part number |
Answer: | I bought a new one today from a lumberyard and it is a Type 1. (says right on the sticker on the motor) Not sure if that means the slide mechanism is better or worse than the Type 20. I would assume it was made in 2014 because there is a "Dewalt use only" tag on the box which starts with 2014. Not sure if a "fresher" saw is a Type 20 |
Question: | Can xps be added, i know dewalt makes a kit to add it to some saws, but this model was not listed |
Answer: | mmToolparts actually sells a kit (3 proprietary DeWalt parts + their wiring harness) for less than $70. They have videos on their website that show how to install the parts on DW716, DWS779, and DWS782 saws. You will need some additional tools (torx screw drivers or torx bits, wire strippers/cutter/crimper) and somewhat mechanically inclined. Just google "DWS779 xps light kit" and they should be the top result. This might be an easier option versus going to a DeWalt service center in the post pandemic world. |
Question: | Does this miter saw come with a laser or any guiding system |
Answer: | It does not come with any laser for guidance. You may find my answer a bit crude, I've been using miter saws for many years and the best guiding system I found to work is my/your eyes. Having lasers or no lasers you still need to use your eyes to get the work piece spot on near the cutoff point. Hope this helps! |
Question: | Is there an LED cut line |
Answer: | You can add the LED light to this saw. Not a laser but a shadow light that show exactly where the saw blade will cut. I just did it last night. Parts can be had for about $70. This basically turns it into a model 780 which is much more expensive. Pretty simple to add. |
Product description
The DEWALT 12" Double Bevel Compound Miter Saw is powered by a 15A 3,600 RPM and offers a new precise miter system and machined base fence support for optimal accuracy. Features a new handle design for maximum portability, cam lock miter, detent override, bevel crown stops and is best in class capacity. Constructed for easy, hassle free use saw's capacities are miter 0 to 60 degree left, 0 to 50 degree right, bevel 0 to 48 degree left and right, cross cuts 2 x 14 on 90 degree and miters 2 x 10 on 45 degree, base capacity 6 1/2" left and right with a crown capacity of 6 5/8". Carbide blade, dust bag, wrench and manual, 90 day money back guarantee, one year service, three year limited warranty. Weighs 54 pounds.
From the Manufacturer
The DEWALT DWS780 12-inch sliding compound miter saw, has been designed to be precise and accurate enough for fine woodworking, yet durable enough for framing and deck building. The DWS780 is ideal for a variety of end users, including cabinet makers, trim carpenters, framers, installers, and many other professional contractors who require a product that delivers the accuracy, capacity, durability, portability, and ease-of-use that this saw offers. For visibility and accuracy when cutting, this saw features the XPS LED light and cut alignment system that casts a laser-like shadow on the work surface, showing users where the blade will come in contact with the material. Since it does not require recalibration over time or when changing blades, this alignment system can be more accurate and durable than traditional laser guides. The saw’s dual bevel system includes the ability to bevel right and left from 0 to 49 degrees with positive stops at 0, 22.5, 33.9, 45, and 49 degrees in both directions, as well as a high visibility bevel scale. The saw also miters 60 degrees to the right and 50 degrees to the left and features an adjustable stainless steel miter detent plate with 10 positive stops, allowing for fast and easy adjustments. A cam lock miter button allows users to lock angles between detents for versatility on the jobsite. The saw features a powerful 15 amp motor that delivers 3,800 rpm. For convenience, the power cord is routed through the rail in the back, eliminating interference with the slide. Additionally, the saw offers an industry-leading combination of cut capacities, which includes 6-3/4 inch vertical capacity, 7-1/2 inch nested crown capacity, 13-7/8 inch horizontal capacity, and exclusive back fence design that cuts up to a 2 by 16 at a 90 degree angle and 2 by 12 at a 45 degree angle. To simplify and maximize vertical cutting capacity, the unit includes a rail lock latch for holding the head away from the fence.
- New precise miter system
- Handle design for added portability
- Integrated XPS cross cut positioning system provides adjustment-free cut line indication
- Powerful 15 amp, 3800 rpm motor delivers extended power and durability
- Exclusive back fence design cuts up to 2X14 dimensional lumber at 90-degrees, 2 by 12 at 45 degrees
- Adjustable stainless steel miter detent plate with 10 positive stops improves productivity, ensures accuracy
- Innovative gearbox and belt drive design increases vertical cutting capacity
- Super-efficient dust collection system captures over 75% of dust generated
User questions & answers
Question: | Is the current model that is shipping type 1 or type 20. If you look up the parts diagram the type 20 has a different slide mechanism part number |
Answer: | It is a cheap mitre saw - spent the extra couple of bucks and buy a Good one. I give it 2 stars. |
Question: | Can xps be added, i know dewalt makes a kit to add it to some saws, but this model was not listed |
Answer: | I have never tried to o cut PVC pipe with this saw. |
Question: | Does this miter saw come with a laser or any guiding system |
Answer: | Degree of Angle = 22-1/2; 45; and 90. |
Question: | Is there an LED cut line |
Answer: | Teeth Per Inch = 12 |
Product description
Shop Master 10 in. Miter saw with a battery operated laser that makes aligning the blade to the work piece more convenient and precise. It features a Spindle Lock that holds the blade in place during changes. The shop Master 10 in. Miter saw is perfect for the Dyer in the family or for everyday use. It features a powerful 15 amp motor that cuts through wood like butter and spins the 10 in. Blade at 5500 RPM. It has denoted stops at 0, 15, 22.5, 30, and 45 degrees. The battery powered laser ensures an accurate cut every time. It is UL listed and comes with a 3 year warranty. The saw can make Left bevel cuts from 0 to 47 degrees. It works virtually with all Miter saw stands.
- Lightweight unit is easy to move from room to room or even from job to job
- Works with virtually all miter saw stands
- Spindle lock holds spindle securely while bade nut is loosened and removed
- Capacity – cuts Nominal 4x4 and 2x6 at 90° and 2x6 with one pass
- Bevels left - from 0°- 47°, cuts Nominal 2x6 at full bevel
User questions & answers
Question: | Does the miter saw have clamp hold down for cuts |
Answer: | I bought a new one today from a lumberyard and it is a Type 1. (says right on the sticker on the motor) Not sure if that means the slide mechanism is better or worse than the Type 20. I would assume it was made in 2014 because there is a "Dewalt use only" tag on the box which starts with 2014. Not sure if a "fresher" saw is a Type 20 |
Question: | Does this come with a dust bag |
Answer: | mmToolparts actually sells a kit (3 proprietary DeWalt parts + their wiring harness) for less than $70. They have videos on their website that show how to install the parts on DW716, DWS779, and DWS782 saws. You will need some additional tools (torx screw drivers or torx bits, wire strippers/cutter/crimper) and somewhat mechanically inclined. Just google "DWS779 xps light kit" and they should be the top result. This might be an easier option versus going to a DeWalt service center in the post pandemic world. |
Question: | Does this saw have auto braking |
Answer: | It does not come with any laser for guidance. You may find my answer a bit crude, I've been using miter saws for many years and the best guiding system I found to work is my/your eyes. Having lasers or no lasers you still need to use your eyes to get the work piece spot on near the cutoff point. Hope this helps! |
Question: | Does it cut an accurate 45*? Will the blade lock in place at 45*? I build picture frames and if the cuts r off at all the corners won't align right |
Answer: | You can add the LED light to this saw. Not a laser but a shadow light that show exactly where the saw blade will cut. I just did it last night. Parts can be had for about $70. This basically turns it into a model 780 which is much more expensive. Pretty simple to add. |
Product features
Laser
Battery Operated with on/off switch. Makes aligning blade to work piece more convenient and precise.
Dependable and Versatile
Works with virtually all miter saw stands. Lightweight unit is easy to move from room to room or even from job to job with ease.
Powerful
The powerful new 15 amp motor cuts nominal 4"X 4"and 2"X 6" at 90° and 2"X 6" with one pass while the electric brake will stop the saw blade within seconds of releasing the trigger.
Shopmaster 10" Miter Saw w/ Laser
The Shopmaster S26-260L is the perfect addition to your home workshop. This 10 inch miter is packed full of features as well as the power to handle the demands of a handyman all at a price that you will love! Discover why people can't keep from talking about the Shopmaster 10" Miter Saw w/ Laser.
Product description
DEWALT DCS361MB 20V Max Cordless Miter Saw Bare tool utilizes a 20V Max Battery Pack (DCB204) which provides on average, 183 cuts of 2x4 Pine - or 275 cuts of 3-1/4 Pine baseboard. It offers an integrated XPS cross cut positioning system that provides adjustment free cut line indication for better accuracy and visibility. The 7 1/4 Inch Sliding Miter Saw features a single left bevel which ranges from -3Degree to 48Degree left. With a 3 1/2 inch maximum vertical, 3 5/8 inch crown nested, and 2x8 inch horizontal cut capacity, this saw will handle most of the common cuts needed. The adjustable stainless steel miter detent plate has 10 positive stops to improve productivity and ensures cutting accuracy. An oversized bevel scale makes bevel angle adjustments accurate and easy. The compact, lightweight design (31.6 bs.) allows for easy transport and storage. It has a cam lock miter handle which delivers quick and accurate miter angles, along with a precise miter system and machined base fence support for optimized durability and cutting accuracy.
- Integrated cut line cross-cut positioning system provides adjustment-free cut line indication for better accuracy and visibility. Capacity to cup 3 5/8in nested crown and 3 1/2 base vertically
- Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy. Oversized bevel scale makes bevel angle adjustments accurate and easy
- Compact, lightweight design (30 lbs.) allows for easy transport and storage
- Cam lock miter handle delivers quick and accurate miter angles
- Precise miter system and machined base fence support optimize durability and cutting accuracy
- Battery & Charger Sold Separately
User questions & answers
Question: | How well was this product packaged? Did anyone experience damage during shipping? I don't usually buy heavy items like this on-line. Thanks |
Answer: | The saw was sufficiently packaged to protect it during shipping. I got mine in perfect condition. The manufacturer's packaging took care of most of the protection, and I'm pretty sure it was over-boxed as well. Hope this helps, and enjoy the saw. I haven't had a ton of use from mine yet, but have done several smaller projects with just a few cuts and have been pleased with the performance (it's not a cheap toy) and ease of handling. The size and weight make it easy to get it out and start cutting, then put away quickly when the job is done. |
Question: | What is the difference between the dcs361b and the dcs361m |
Answer: | The M1 is the European version |
Question: | I see the vertical max is 3 5/8, but could this cut 4x4 lumber |
Answer: | No not with one cut. You would have to turn the 4x4 over. Blade is a 7 1/4" diameter, same as a hand held circular saw. From the tip of the teeth to the edge of the washer (at center of blade) I get 2 7/8". |
Question: | What's the cross cut capacity if we use the entire sliding action |
Answer: | On a straight 90, I can cut 8" wide boards. On a 45, I can cut right around 5-7/8". This saw was a great addition for me, as I'm constantly working in places away from a simple power source (my generator is a beast and not easy to transport). It cuts cleanly, hasn't bogged down yet (even on wet 2x6 treated), and is super light and easy to transport. |
- 🔥Ideal gift for your family & professional work
- 🎅2 Adjustable Speed & 3 Blades: By pressing the switch, you can convert between the two speeds (3200 RPM or 4500 RPM) effortlessly for more precise cutting, high speed for wood while low speed for metal. While the Tacklife EMS01A miter saw is equipped with 3 blades: two 10" 40T TCT blades for wood and plastic, and one multifunctional 10" 48T TCT blade for versatile use. Richer accessories provide a wide range of choice for your operation.
- 🎅Bevel Cutting & Laser Guide: The free bevel range from 0° to 45° allows you to do bevel cutting for more purposes.The Angle of the miter table is -45°/ 0°/ + 45° and the positive angles in all these directions are 0°, 15°, 22.5°, 30° and 45°, respectively.The laser is attached to accurately track real-time position and allows you to perform precise cutting.
- 🎅Durable Tool & Iron Blade Guard: Solid iron self-retracting saw shield is more durable than plastic and transparent saws, the teeth cover of the cutting blade can protect you from accidental mishaps. The sliding cut design allows you to cut longer planks. Made of stainless steel castings, it provides you with a strong saw and is well suited to withstand the daily work of the work site.
- 🎅Dust-free Environment & Extension Table: An additional chip bag connects directly to the saw to help collect sawdust away from the workpiece during cutting. A 35mm dust port allows you to connect your vacuum cleaner with an adapter to capture more dust. An extension table with vice clamping provides better support and balance, increasing the stability during cutting.
Product features
TACKLIFE Advanced 10-Inch 15-Amp Multifunctional Sliding Miter Saw-EMS01A
- Uses: can be widely applied to various materials like wood, MDF, chipboard, plywood, blockboard, hardboard, wood with nails, 3 mm mild steel plates and more.
- If you have the demand to change the blade, calibrate the bevel angle and know more about operating instrument
Please refer to the video guide below.
Extensible Table
Extended platform on both sides adds the stability when cutting the long material. Vice clamping system helps to fix the object.
Laser Guide
Red laser guidance illuminates the cutting line, and add the accuracy when you operate in dim environment.
Portable Tool
Weigh only 31.5 pounds, it can be carried around the job-site effortlessly with the help of built-in portable handle.
Dual speed adjustment for versatile uses
Dual speed adjustment for multiple applications - The speed can be adjusted to meet different cutting requirements. - Speed 1(3200 RPM): Ideal for soft aluminum, soft steel and more. - Speed 2(4500 RPM): Ideal for wood, plastic, plywood and more. - Now experience the cutting-edge design.
- 🔥Ideal gift for your family & professional work.Usually ships within 5 days.
- ➤DOUBLE BEVEL CUTTING & RED LASER GUIDE - Double bevel cutting design allows you to adjust the head to left 45°and right 45°to meet different cutting wood, plastic tubing and soft metal. Integrated laser controlled by single switch, marking the cutting line, helping sawing long work pieces.
- ➤3800 POWER MOTOR & EFFICIENT FOR OPERATION - With 15 AMP MOTOR and full-size performance at 3800 RPM, TACKLIFE sliding compound miter saw provides powerful, smoother, faster cutting. The equipment of soft-grip cutting handle and base angle change handle for added comfort. SLIDING DESIGN can extend cutting flexibility and add cutting width.
- ➤EFFICIENT DUST COLLECTION SYSTEM - Efficient dust bag can collect more than 70% of the dust produced. The 35 mm dust port allows you to connect a vacuum cleaner to achieve the ideal 100% dust collection, keeping the environment clean.
- ➤40 T BLADE & EXTENSIBLE TABLE - The 305mm 40-tooth TCT strong blade is ideal for cutting wood, plastic tubing and soft metal.Equipped with allen wrench, the blade can be easily changed.The wide worktable provides better material support during operation, and the pair clamping system ensures the safety of the workpiece, allowing for more secure cutting operations.
Product features
TACKLIFE 12-inch Double-Bevel Sliding Compound Miter Saw - PMS03A
- Powerful Motor: Powerful 15 Amp/1700 W saw delivers full-size performance at 3500 rpm, making cutting faster, smoother.
- Double Sliding Design: Sliding design for extended cutting flexibility and added cutting width.
- Double Bevel Cutting: You can adjust the cutting angle from left 45° to right 45° to meet different cutting needs.
- Clamping Device: The clamping device system ensures the stability and ensures the safety of operation.
- Comfortable Handle: Soft-grip cutting handle and base angle change handle to increase users' comfort.
- 3 Metes Cable: 3 meters long cable for your cutting work to provide more convenience.
Double-Bevel Cutting
You can adjust the angle from -45°-0°-45° to meet different needs, In detail: 0° : 4.13 x 12.99 inch, 45°(L) : 2.36 x 12.99inch, 45°(R) : 1.38 x 12.99 inch.
Precise Miter Angle
Adjustable miter scale with positive stops (-45°/-22.5°/0°/+22.5°/+45°) allow users to quickly adjust the saw to do square cuts, bevel cuts and compound cuts.
Maximum Cutting Performance
90°x90°: 105x335 mm
90°x45°(L): 60x335 mm
90°x45°(R): 35 mmx335 mm
45°x90°: 105x235 mm
45°x45°(L): 60x235 mm
45°x45°(R): 35x235 mm
Large Extended Worktable
2 Extension rods for a larger working table to meet your requirement of large pieces cuts. Vice clamping system helps to fix the objects and free your hands.
Precise Laser Guide
Built-in laser controlled with single switch, it works once the machine is power on, making straight cuts more professional and easier.
90% DUST COLLECTION
Included dust bag helps to collect over 90% dust to maintain a tidy working space. 30mm dust port also can connect with household vacuum cleaner.
- 🔥Deal gift for your family & friends. In US, Fast delivery
- Double-Bevel Compound Miter Saw
- ▲【Double-Bevel Cutting & Max Cutting Depth】Double-bevel design allows 45° cuts(L)of up to 2.36*12.99 inche and 45 °cuts(R) of up to 1.38*12.99 inche; It can meet bevel cutting needs by swing the saw compared with a single bevel miter saw
- ▲【Powerful Motor & Multipurpose Cutting】Powerful 15Amp/1700W with 3800rpm smoothly cutting through multiple materials such as wood, plastics, aluminum alloy and metal plate
- ▲【Sharp 40 Tooth TCT Blade】Chop saw comes with an ultra high grade 40 tooth tungsten carbide tipped blade, offering more possibilities for cutting various materials and allowing smoothly grooving and trenching
- ▲【Ergonomic & Double Linear Sliding Rail Design】D-handle design creates more comfortable and easy to use for users; Double linear sliding rail Design provide guarantee for more smooth, steady and precise cutting works
- ▲【Laser Marker & Extensible Table】Laser marker accurately track the real-time position for making the cutting more accurate and professional; Extensible table with vice clamping provide better support and balance to prevent material from warping
Product features
About Tacklife 12inch Double-Bevel Sliding Compound Miter Saw with Adjustable Cutting Angle
- Powerful Motor: Powerful 15Amp/1700W saw delivers full-size performance at 3,500 rpm, making cutting faster, more powerful and extensive
- High Compatibility: For further convenience and versatility, Tacklife PMS03A miter saw is compatible with a variety of 12-inch blades
- Clamping Device: Come with a clamping device, no need to support the wood by hands any more, providing great safety
- Extended Handle Lever: The extended handle function lever provide more possibility to your cutting work
- Portable Design: It is convenient to transport the saw with carry handle when you want to move the saw
- Comfortable Handle: Soft-grip cutting handle and base angle change handle add to user comfort
- Versatile Tool : Tacklife PMS03A miter saw ideal for cutting wood, soft metals, plastics with laser guide
Double-Bevel
- You are able to adjust the angle freely from -45°-0°-45° for the oblique cutting according to your need
Maximum Cutting Performance
- 0° x 0° :4.13 x 12.99inch
- 0° x 45°(L) :2.36 x 12.99inch
- 0° x 45°(R) :1.38 x 12.99inch
- 45° x 0° :4.13x 9.06inch
- 45° x 45°(L) :2.36 x 9.06inch
- 45° x 45°(R) :1.38 x 9.06inch
Precise Mitre Scale
- Adjustable miter scale with positive stops (-45°/-22.5°/0°/+22.5°/+45°) allow users to quickly adjust the saw to the most common miter angles, allowing for square cuts, bevel cuts and compound cuts
- The scale reading is directly carve on the miter scale for easy reading and not easy to fall off, increasing durability
Package Content
- 1* Tacklife PMS03A Compound Miter Saw; 1* 40 Tooth TCT blade; 1* Clamping device; 1* Dust bag; 2* Side support; 2* Allen wrenches; 1* User Manual; 1* Maintenance Card
Large Extended Platform
Both sides are equipped with a large area of extended worktables to meet your needs
Professional Laser Guide
A visible red laser guidance enables the cutting more precise and convenient
Efficient Dust Bag
The large capacity dust collection bag makes your work more clean and healthy
Product description
The RYOBI 7-1/4 in. Sliding Miter Saw is a new edition to the miter family. It can make angled cuts up to 45° on boards all the way up to 6 in. wide, and has a max RPM of 5,350. It also features an LED cutline indicator that illuminates the workspace and makes for easier cuts. Combine that with positive miter stops for all common crown molding angles, and a quick action lever that gives you the ability to lock in on any angle and you can see how this saw will allow anyone to become a precision craftsman. For more things RYOBI visit ryobitools.com Maximum crosscut dimensions: 90° - 1-1/2 in. x 10 in.; 45° - 1-1/2 in. x 6 in. Sliding head provides maximum capacity for up to 10 in. W boards at zero bevel Miter stops located at the most common crown molding angles: 0°, 15°, 22.5°, 31.6° and 45° (left and right) LED light accurately aligns cutline with blade and illuminates the work piece Miter ranges from 47° left to 47° right to accommodate a wide variety of cuts Miter detent override provides quick-action lever bypass with 1 simple motion Equipped wit horizontal D-handle for utmost visibility and comfort Electric brake stops blade rapidly for added safety Includes: 10 Amp sliding compound miter saw, 7-1/4 in. carbide-tipped blade, work clamp, blade wrench and dust bag
Product description
Make Genesis Power Tools The beginning of your next DIY project! the Genesis GMS1015LC 10 in. Compound Miter saw with laser features a powerful 15 amp motor while competitor models only offer 14 amps for the same price. The included 60 tooth blade is great for finish carpentry cuts and means you don T have to spend additional money for a quality blade to start your project! laser Guided cutting offers better accuracy and an Electric brake stops the blade within a few seconds after releasing the trigger. An arbor lock makes blade changes faster and easier and an included hold down clamp assists with holding the work in place for safer operation! add the Genesis 10 in. Compound Miter saw with laser to your tool Collection today!
- Make bevel cuts up to 45 degrees left | perform compound Miter cuts with ease!
- Use compound cutting for crown molding, shadow boxes, Picture frames, and more | the Genesis compound Miter saw is inexpensive and versatile!
- Laser cutting guide for quicker alignment and improved accuracy | Know where the cut will be ahead of time with the integrated laser guide!
- Electric brake stops the blade in seconds and Arbor lock for quick blade changes
- Includes: 60T Carbide blade installed, hold down Clamp, dust bag, Two extension wings, blade wrench and two AAA batteries for laser
- Make precision miter cuts up to 45 degrees left and right, with 9 position stops at commonly used angles
- Arbor lock for quick blade changes
User questions & answers
Question: | Where can I get parts for this saw |
Answer: | tel:1.888.552.8665 Based in South Carolina, you’ll talk to a real American! So be sure you call during office hours on the East Standard Time Zone. (EST) |
Question: | wiill this work with a harbor freight 12 inch sliding compound saw |
Answer: | It may?? I am using my stand with a Hitachi 10" miter saw but it is not sliding.. It has good balance and I have not had any issues with it yet.I did have to mount a piece of plywood on the stand and the saw to the plywood but other than that it works well. Centering the saw on the stand will probably be the key with a sliding set up. |
Question: | Will the saw store on stand vertically |
Answer: | Yes |
Question: | Can you cut finished 2x6s with this saw |
Answer: | Yes. Put a piece of blue tape across the 2X6 where you want to cut it and cut the board right through the tape. Tape will help to insure a clean cut. |
Product features
Safe and Powerful
The electric brake stops the blade in seconds and Arbor lock for quick blade changes.
Laser Cutting Guide
Know where the cut will be ahead of time with the integrated laser guide for quicker alignment and improved accuracy.
Versatile for Every Project
Use compound cutting for crown molding, shadow boxes, picture frames, and so much more. Make precision miter cuts up to 45 degrees left and right, with 9 position stops at commonly used angles.
You're Covered!
Genesis Power Tools are warranted free from defects in material and workmanship for two years after date of the original purchase. Please call our Toll-Free Help Line if you need any additional help: 888-552-8665
Latest Reviews
View all
Eye Healths
- Updated: 05.03.2023
- Read reviews

August Hoodie In The Worlds
- Updated: 27.05.2023
- Read reviews

Sweatpants
- Updated: 24.04.2023
- Read reviews

Bass Practice Amps
- Updated: 02.03.2023
- Read reviews

Lumens Multimedia
- Updated: 07.07.2023
- Read reviews