14 best jet compound miter saws

Product description

The JET dual-bevel sliding compound miter saw is one the most versatile saws in your shop. It efficiently cuts miters, bevels, straights, and compounds with precision and accuracy over a hand saw. This saw is a workhorse in your shop that is also portable enough to take with you when you need a great saw on the job.

• DUAL BEVEL CAPABILITY WITH UP FRONT CONTROLS: Maximize cutting of compound angles.
• SINGLE-MOTION THUMB LEVER: Change miter angles quickly.
• ENCLOSED LINEAR BEARINGS: Allows for smooth and controlled slide operation.
• ERGONOMIC, AMBIDEXTROUS, RUBBER GRIP HANDLE: For maximum control.
• HEAVY-DUTY 15-AMP MOTOR: Easily powers through wood.

User questions & answers

Question:	Does it have a laser guide
Answer:	Oh -- each biscuit contains Energy 163 kJ or 39 kcal (2% adult's reference intake); Fat 0.9g (1%); Saturates 0.4g (2%); Sugars 3.8g (4%); Salt 0.03g (1%). There are 10 biscuits per 100g package.
Question:	Whete is the saw made
Answer:	Dear customer. They are not kosher certified.Kind regards, Brightfuture-uk
Question:	What is the Max piece of wood size this will cut? I have some rough lumber that is 3” thick and about 15” wide
Answer:	Hello, While we do have Kosher Certification in other parts of the world, we do not have official Kosher Certification in the United States. Thank You, Lotus Bakeries Customer Service
Question:	Come with laser
Answer:	There is no information on the packaging indicating the product is kosher. Sorry I can't be more helpful.

Product description

The JET dual-bevel sliding compound miter saw is one the most versatile saws in your shop. It efficiently cuts miters, bevels, straights, and compounds with precision and accuracy over a hand saw. This saw is a workhorse in your shop that is also portable enough to take with you when you need a great saw on the job.

• DUAL BEVEL CAPABILITY WITH UP FRONT CONTROLS: Maximize cutting of compound angles.
• SINGLE-MOTION THUMB LEVER: Change miter angles quickly.
• ENCLOSED LINEAR BEARINGS: Allows for smooth and controlled slide operation.
• ERGONOMIC, AMBIDEXTROUS, RUBBER GRIP HANDLE: For maximum control.
• HEAVY-DUTY 15-AMP MOTOR: Easily powers through wood.

User questions & answers

Question:	What is the maximum cutting degree left and right
Answer:	I'm not sure. They fit my FN250A. If you pull up the exploded view on line it says that the part # you want is 904725. I would message Porter Cable to make sure.
Question:	Is the bevel mechanism in the front of the saw or the back
Answer:	No, it is not compatible with a C3151 Porter Cable compressor.
Question:	What is the arbor size
Answer:	This part is not compatible with the FN250C, you will need part number #649695-00.
Question:	Where is it made
Answer:	No, it is only compatible with the FN250 and FN251.

Product description

The Delta Cruzer 12 Inch sliding miter saw uses military-grade aluminum frame members with heavy duty bearings for super smooth cutting operation and extremely long life. The dual bevel sliding CRUZER Miter saw has an industry leading 18 inch nominal cross cut capacity. The space saving design is easy to transport and fits against the wall in a shop. 1.5 in dust port for vacuum connection and excellent dust collection

• Shadow guide cutting line projects a consistent and accurate cutting line on your work piece
• Product dimensions – 30” D x 25.5” W x 21.5” H | Weight – 57 lbs. | Voltage – 120V | Blade size – 12” Diameter | Arbor hole size – 1” | Speed – 4,000 RPM | Max cut thickness – 6.5” | Cord length – 7 ft.
• One-hand front miter Controls with push button miter detent override and front bevel release for quick movement | 15 amp motor for powerful cuts and blade brake for safety
• Molded handle and full size trigger is comfortable for right or left handed users 15 amp motor for powerful cuts and blade brake for safety shadow guide cut line for repeatable accuracy
• Dual bevel 47° left/47° right with front bevel release and 7 positive bevel stops at the most popular angles and easy to reach lever override to move between stops | 50° left miter/60° right miter capacity with 10 miter detents and positive stops

User questions & answers

Question:	Is there a restocking fee
Answer:	Mine came with two 18V Lithium batteries. They were the XC5.0 (5 Ah).
Question:	What is the dimension from the top of the table to the bottom of the base if I want to make extension wings
Answer:	I can't remember.If it did, I'm not using it because it was cheap,or didn't fit everything. I do use the big clippers to cut my hair every two weeks.
Question:	Is this the gen
Answer:	The oil is listed as made in china, "a pure thin natural oil with no additives" but it does not say what kind. It has not caused any reaction and keeps the blades clean and moving well.
Question:	Is this a gen-1 or
Answer:	7/8"

Product features

Maximum capacity

A HUGE 18 inch cross cut capability, 12” carbide blade and an extending arm on the Delta DUAL BEVEL Sliding Compound miter saw provides you versatility to take on the most demanding projects. Easily cut 7-1/2 inch crown and 6-1/2 standing base mouldings. The saw’s unique design operates in compact space compared to sliding miter saws with long rail systems

.

Accuracy

One-hand front miter controls with push button miter detent override and front bevel release for quick Accurate alignment. The patented extending arms reduce lateral movement of the cutter head. This saw is designed to provide you repeatability and the Accuracy demanded by professionals

Durability

The Delta Cruzer 12 inch sliding miter saw uses military-grade aluminum frame members with 18 heavy duty bearings for smooth cutting operation on and extremely long life. It’s 15 amp motor, advanced engineering, and 5-year PLEDGE establish this miter saw as a DURABLE and dependable tool that you can count for many years

Close quarters

This saw can operate in tight spaces and against a workshop wall

Powerful

15 amps of power plows through stock and heavy timbers

Smart design

The forward located DUAL BEVEL lever prevents you from the difficulty of reaching behind the saw to make bevel adjustments

Crown master

The Delta Cruzer makes perfect crown moulding cuts every time

Product description

The 12 in. Dual-bevel Glide Miter saw features the smooth cutting motion, accurate performance and space-saving design of Bosch Patented axial-glide system.

• Axial glide system: The patented glide system allows wider cross cuts and better alignment while also being compact; This saves you 12 inch of valuable work space; Bosch glide miter saw also offers unmatched smoothness of cut
• Capacity: Expanded cutting capacity 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring
• Adjustable: The GCM12SD miter saw provides easy adjustments with a large easy to read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts; Category best 90 percentage dust collection optimized for cutting 2x material with a vacuum
• Precision: Square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support
• Ease of use: Upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw

User questions & answers

Question:	is ther laser on this saw
Answer:	The UK version (Bosch GCM 12 GDL Professional) ships with an included non battery powered laser that produces two lines that bracket the saw kerf. Not sure why Bosch made the laser layout tool an extra for USA version. There are other differences between these models and the UK 240V version has more options as stardard equipment.
Question:	dose this saw have a depth stop on it so you can create a dado
Answer:	Yes, it has a depth stop. The saw cuts very nice and it glides effortlessly, u must adjust the drag on it. When cutting dadoes, it does not hang up like rail type saws when the fine dust finds its way into the rail bearings like the Dewalt I used to use. It was an expensive investment in a saw, but i really like it so much more then any of my previous sliding compound saws.
Question:	Where is this saw made? Asia/US/EU
Answer:	Best miter saw you can buy. Doesn't matter where it was made
Question:	Why buy this miter saw versus the Bosch
Answer:	SGT .several reasons i chose this saw over the 5312. first off I run a high end custom cabinet shop and this saw sees very heavy uses. The sliding rails on the type of the Bosh 5312 always get dust in the bearings and with time the sliding action sticks and must be taken apart, the bearings cleaned and re-lubed with dry silicone lubricant. That is what my experience was with my last 3 sliding saws, (Dewalt, Ryobe and Dewalt pro). the other thing i love about the Bosch GCM12SD its there are no rails sticking out the back of the saw, and the clearance from the wall where my saw sits is no longer needed. It was a great investment even though its on the pricy side. i love the accuracy and the performance, I change to a better cutting blade and the performance got better. I switch from the stock blade and now run a Forrest CM12806115 Chopmaster 12 inch 80 tooth blade cleaner cuts and very smother with no tear outs. i hope this helps you

Product features

Bosch 12-Inch Dual-Bevel Glide Miter Saw (GCM12SD)

The Bosch GCM12SD is a 12-Inch Dual-Bevel Glide Miter Saw that features a smooth cutting motion, accurate performance and a space-saving design of the Bosch-exclusive Axial-Glide System. Pre-aligned Squarelock fences help the saw maintain precision throughout its life; a soft-grip ambidextrous handle along with a combination dust chute and vacuum adaptor add to user comfort. The saw also offers a large cutting capacity, easy-to-read bevel and miter scales with detents at common angles, and easy-access upfront controls.

Compact cutting

Featuring a Bosch-exclusive Axial-Glide system for durable precision, complete control, and compact workspaces.

Precise control

High-precision Squarelock quick-release fence aligns fence 90 degrees to saw’s table and requires no adjustment; one-touch lock/unlock to slide fence for added support.

Versatile saw

With a 14-Inch expanded horizontal cutting capacity, 6-1/2-inch vertical capacity, and a 6-1/2-inch crown capacity (45-degree spring), this miter saw is perfect for any variety of cuts.

Adjustable

The saw provides easy adjustments with a large easy-to-read uniform bevel and stainless steel miter scales with marked detents and roof pitch angles.

Product description

The DEWALT DWS779 12" Sliding compound Miter saw features a powerful 15 amp, 3,800 RPM motor that delivers extended power and durability. It has a super-efficient dust collection system that captures over 75 percent of dust generated. This miter saw also offers an exclusive back fence design which cuts up to 2x14 dimensional lumber at 90° and 2x12 at 45°.

• Your purchase includes: 1 CDEWALT DWS779 sliding compound cord miter saw, 12-inch, carbide blade, 1 blade wrench
• Tool dimensions: 17” H x 24.75” L. Tool weight: 56 pounds; Maximum cutting thickness: 6.75 inch
• Other specifications: 15 Amps, 12” blade diameter, 5/8” or 1” Arbor size. 3800 RPM motor. Type of milter saw: Slide
• Exclusive back fence design cuts up to 2x14 dimensional lumber at 90 degree and 2x12 at 45 degree. Miter saw does not come with LED (sold separately) or laser cutting guide
• Super-efficient dust collection system captures over 75 percent of dust generated
• Backed by Dewalt's 3 year limited warranty

User questions & answers

Question:	Is the current model that is shipping type 1 or type 20. If you look up the parts diagram the type 20 has a different slide mechanism part number
Answer:	I bought a new one today from a lumberyard and it is a Type 1. (says right on the sticker on the motor) Not sure if that means the slide mechanism is better or worse than the Type 20. I would assume it was made in 2014 because there is a "Dewalt use only" tag on the box which starts with 2014. Not sure if a "fresher" saw is a Type 20
Question:	Can xps be added, i know dewalt makes a kit to add it to some saws, but this model was not listed
Answer:	mmToolparts actually sells a kit (3 proprietary DeWalt parts + their wiring harness) for less than $70. They have videos on their website that show how to install the parts on DW716, DWS779, and DWS782 saws. You will need some additional tools (torx screw drivers or torx bits, wire strippers/cutter/crimper) and somewhat mechanically inclined. Just google "DWS779 xps light kit" and they should be the top result. This might be an easier option versus going to a DeWalt service center in the post pandemic world.
Question:	Does this miter saw come with a laser or any guiding system
Answer:	It does not come with any laser for guidance. You may find my answer a bit crude, I've been using miter saws for many years and the best guiding system I found to work is my/your eyes. Having lasers or no lasers you still need to use your eyes to get the work piece spot on near the cutoff point. Hope this helps!
Question:	Is there an LED cut line
Answer:	You can add the LED light to this saw. Not a laser but a shadow light that show exactly where the saw blade will cut. I just did it last night. Parts can be had for about $70. This basically turns it into a model 780 which is much more expensive. Pretty simple to add.

Product description

The C12RSH2S miter saw is the top of the line 12" sliding dual compound miter saw Applications: Ideal for trim carpenters, framers and woodworkers who demand precision and reliability. Compact slide system: The compact slide system requires zero clearance. The fixed rail system allows the miter saw head to smoothly glide along the fixed rails, eliminating the rear clearance that other sliding miter saws require. The compact slide system decreases the footprint of the saw by up to a foot, saving valuable real estate in any shop environment. Tall Sliding Fences: The miter saw also features tall sliding fences that allow for cutting much larger material, while easily sliding out of the way when making bevel cuts. Tool-less Laser Market: Easily adjust the laser marker allowing novice to expert users higher prcecision to make perfect accurate cuts. Miter Angle: 0-57 degree miter angle to the right and 0-45 degree to the left for flexibility Bevel: 0-45 degree bevel angle range to the right and left allowing quicker and easier cuts Motor: Powerful 15 amp motor to tackle tough cutting jobs with ease

• Same tools. New name. Hitachi power tools has renamed to Metabo HPT
• (Motor) Powerful 15 amp motor to tackle tough cutting jobs with ease
• (Compact Slide System) Allows the saw head to slide along fixed rails, eliminating the need for rear clearance
• (Includes) C12RSH2S miter saw, 12 inch 60T TCT Saw Blade, Dust Bag, Vice Assembly, 17mm Box Wrench
• (Large Sliding Fences) Raise fence height to 5-1/8 inches to cut up to 7-1/2" Crown molding vertically

User questions & answers

Question:	A little confusing on whether it comes with a blade. The two options are for with or without blade but the cheaper one advertises the blade included
Answer:	I got it with a blade. It’s. Cheap one so I replaced mine right away
Question:	Is this saw really 77lbs
Answer:	Yes ! It’s heavy . I purchased the portable miter table with wheels from harbor freight to roll it around but you still have to take it on and off the table before beginning to move saw . Example; when putting it in and out the bed of a truck you have to attach and detach the saw
Question:	Anyone know the difference between the c12rsh2s and the c12rsh2m (seen in big box store)? can't find info on either on metabo site
Answer:	Hi there! The C12RSH2S has been updated to comply with the most recent UL standards. Hope this helps!
Question:	maximum height and thickness of cut at 90 degrees
Answer:	Capacity at 90 Degree Cross Cut = 4-3/16" x 12-1/4" or 4-11/16" x 10-3/16"

Product features

Compact Slide System

Allows the saw head to slide along fixed rails, eliminating the need for rear clearance

Laser Marker System

Increases cutting accuracy

Large Sliding Fences

Raise fence height to 5-1/8 inches to cut up to 7-1/2" crown molding vertically

57 Degree Miter Angle

To the right and 0-45 degree to the left for flexibility and 0-45 degree bevel angle range to the right and left

• 🔥Deal gift for your family & friends. In US, Fast delivery
• Double-Bevel Compound Miter Saw
• ▲【Double-Bevel Cutting & Max Cutting Depth】Double-bevel design allows 45° cuts(L)of up to 2.36*12.99 inche and 45 °cuts(R) of up to 1.38*12.99 inche; It can meet bevel cutting needs by swing the saw compared with a single bevel miter saw
• ▲【Powerful Motor & Multipurpose Cutting】Powerful 15Amp/1700W with 3800rpm smoothly cutting through multiple materials such as wood, plastics, aluminum alloy and metal plate
• ▲【Sharp 40 Tooth TCT Blade】Chop saw comes with an ultra high grade 40 tooth tungsten carbide tipped blade, offering more possibilities for cutting various materials and allowing smoothly grooving and trenching
• ▲【Ergonomic & Double Linear Sliding Rail Design】D-handle design creates more comfortable and easy to use for users; Double linear sliding rail Design provide guarantee for more smooth, steady and precise cutting works
• ▲【Laser Marker & Extensible Table】Laser marker accurately track the real-time position for making the cutting more accurate and professional; Extensible table with vice clamping provide better support and balance to prevent material from warping

Product features

About Tacklife 12inch Double-Bevel Sliding Compound Miter Saw with Adjustable Cutting Angle

• Powerful Motor: Powerful 15Amp/1700W saw delivers full-size performance at 3,500 rpm, making cutting faster, more powerful and extensive
• High Compatibility: For further convenience and versatility, Tacklife PMS03A miter saw is compatible with a variety of 12-inch blades
• Clamping Device: Come with a clamping device, no need to support the wood by hands any more, providing great safety
• Extended Handle Lever: The extended handle function lever provide more possibility to your cutting work
• Portable Design: It is convenient to transport the saw with carry handle when you want to move the saw
• Comfortable Handle: Soft-grip cutting handle and base angle change handle add to user comfort
• Versatile Tool : Tacklife PMS03A miter saw ideal for cutting wood, soft metals, plastics with laser guide

Double-Bevel

• You are able to adjust the angle freely from -45°-0°-45° for the oblique cutting according to your need

Maximum Cutting Performance

• 0° x 0° ：4.13 x 12.99inch
• 0° x 45°(L) ：2.36 x 12.99inch
• 0° x 45°(R) ：1.38 x 12.99inch
• 45° x 0° ：4.13x 9.06inch
• 45° x 45°(L) ：2.36 x 9.06inch
• 45° x 45°(R) ：1.38 x 9.06inch

Precise Mitre Scale

• Adjustable miter scale with positive stops (-45°/-22.5°/0°/+22.5°/+45°) allow users to quickly adjust the saw to the most common miter angles, allowing for square cuts, bevel cuts and compound cuts
• The scale reading is directly carve on the miter scale for easy reading and not easy to fall off, increasing durability

Package Content

• 1* Tacklife PMS03A Compound Miter Saw; 1* 40 Tooth TCT blade; 1* Clamping device; 1* Dust bag; 2* Side support; 2* Allen wrenches; 1* User Manual; 1* Maintenance Card

Large Extended Platform

Both sides are equipped with a large area of extended worktables to meet your needs

Professional Laser Guide

A visible red laser guidance enables the cutting more precise and convenient

Efficient Dust Bag

The large capacity dust collection bag makes your work more clean and healthy

Product description

DEWALT DCS361MB 20V Max Cordless Miter Saw Bare tool utilizes a 20V Max Battery Pack (DCB204) which provides on average, 183 cuts of 2x4 Pine - or 275 cuts of 3-1/4 Pine baseboard. It offers an integrated XPS cross cut positioning system that provides adjustment free cut line indication for better accuracy and visibility. The 7 1/4 Inch Sliding Miter Saw features a single left bevel which ranges from -3Degree to 48Degree left. With a 3 1/2 inch maximum vertical, 3 5/8 inch crown nested, and 2x8 inch horizontal cut capacity, this saw will handle most of the common cuts needed. The adjustable stainless steel miter detent plate has 10 positive stops to improve productivity and ensures cutting accuracy. An oversized bevel scale makes bevel angle adjustments accurate and easy. The compact, lightweight design (31.6 bs.) allows for easy transport and storage. It has a cam lock miter handle which delivers quick and accurate miter angles, along with a precise miter system and machined base fence support for optimized durability and cutting accuracy.

• Integrated cut line cross-cut positioning system provides adjustment-free cut line indication for better accuracy and visibility. Capacity to cup 3 5/8in nested crown and 3 1/2 base vertically
• Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy. Oversized bevel scale makes bevel angle adjustments accurate and easy
• Compact, lightweight design (30 lbs.) allows for easy transport and storage
• Cam lock miter handle delivers quick and accurate miter angles
• Precise miter system and machined base fence support optimize durability and cutting accuracy
• Battery & Charger Sold Separately

User questions & answers

Question:	How well was this product packaged? Did anyone experience damage during shipping? I don't usually buy heavy items like this on-line. Thanks
Answer:	The saw was sufficiently packaged to protect it during shipping. I got mine in perfect condition. The manufacturer's packaging took care of most of the protection, and I'm pretty sure it was over-boxed as well. Hope this helps, and enjoy the saw. I haven't had a ton of use from mine yet, but have done several smaller projects with just a few cuts and have been pleased with the performance (it's not a cheap toy) and ease of handling. The size and weight make it easy to get it out and start cutting, then put away quickly when the job is done.
Question:	What is the difference between the dcs361b and the dcs361m
Answer:	The M1 is the European version
Question:	I see the vertical max is 3 5/8, but could this cut 4x4 lumber
Answer:	No not with one cut. You would have to turn the 4x4 over. Blade is a 7 1/4" diameter, same as a hand held circular saw. From the tip of the teeth to the edge of the washer (at center of blade) I get 2 7/8".
Question:	What's the cross cut capacity if we use the entire sliding action
Answer:	On a straight 90, I can cut 8" wide boards. On a 45, I can cut right around 5-7/8". This saw was a great addition for me, as I'm constantly working in places away from a simple power source (my generator is a beast and not easy to transport). It cuts cleanly, hasn't bogged down yet (even on wet 2x6 treated), and is super light and easy to transport.

Product description

The Makita 10” dual-bevel sliding compound Miter saw with laser (model LS1019L) delivers large cutting capacity and accuracy right out of the box. With the LS1019L, you'll get all the cutting performance you need in a slide compound saw, but with the most compact size in the Category for increased portability. With up to 6-5/8” capacity (crown molding, nested) jobs like cutting baseboards and crown molding are a snap, but with up to 4-3/4” baseboard, capacity, it can cut 4x4 dimensional lumber in one pass. It's ideal for fine woodworking, carpentry, general construction, and more. The LS1019L is powered by a 15 amp direct drive motor with soft start, a key point of difference. This means smoother start-ups and consistent, Constant power with No belts to slip or replace. The Electric brake provides added convenience. The LS1019L will tackle the most demanding jobs while keeping production high.

• 10" slide miter saw with the Crown molding cutting capacity (6-5/8" nested) of a 12" miter saw
• Linear ball bearing system engineered to deliver "dead-on" accurate cuts
• Innovative direct drive gearbox and guard system is engineered for increased vertical cutting capacity (5-1/4")
• Unique 2-steel rail sliding system design offers single slide-glide operation; reducing saw's footprint and allowing operation flush against a wall
• Less weight (57.9 lbs.) and the most compact design in its Class for easy jobsite portability

User questions & answers

Question:	How close is the laser to the cut line? Does the laser line move as you lower the saw blade
Answer:	I'm not aware of any movement of the laser as you are lowering the saw down. Although the purpose of the laser is to be able to cut a mark line when the saw is in upright position.
Question:	Does this saw come with the extension wings like its pictured
Answer:	Yes they are included, they are attached to the saw. Loosen the thumb screw and slide them out.
Question:	As of Mar 2018, Does it still cut an arc when sliding, as opposed to a straight line
Answer:	Mine does not. Be careful with damaged packaging and saw impact
Question:	Does the laser show both sides of the blade, that is is it a dual laser? Also does the laser have a separate switch or is it centrifical
Answer:	The laser is on one line only and it can be switched left or right of the blade. There is a separate ON/OFF switch for the laser

Product features

Makita LS1019L 10" Dual-Bevel Sliding Compound Miter Saw with Laser

The Makita 10” Dual-Bevel Sliding Compound Miter Saw with Laser (model LS1019L) delivers large cutting capacity and accuracy right out of the box. With the LS1019L, you'll get all the cutting performance you need in a slide compound saw, but with the most compact size in the category for increased portability. With up to 6-5/8” capacity (crown molding, nested) jobs like cutting baseboards and crown molding are a snap, but with up to 5-1/4” baseboard, capacity, it can cut 4x4 dimensional lumber in one pass. It's ideal for fine woodworking, carpentry, general construction, and more.

The LS1019L is powered by a 15 AMP direct drive motor with soft start, a key point of difference. This means smoother start-ups and consistent, constant power with no belts to slip or replace. The electric brake provides added convenience. The LS1019L will tackle the most demanding jobs while keeping production high.

LS1019L Includes:

Vertical Vise (122854-6).

Dust Bag (122852-0).

Triangular Rule (762001-3).

10" x 5/8" 60T Micro-Polished Miter Saw Blade.

Hex Wrench 6 (781044-6).

Product description

The Bosch CM8S 8-Inch Single Bevel Sliding Compound Miter Saw features a Bosch exclusive design delivering a well-balanced saw with a top carry handle at the center of gravity and weighing only 37 lbs., these features easily provide one-handed portability on and off the job. Accessible controls make it easy to change bevel settings without reaching behind the saw. The integrated expanding work piece supports, large easy to read miter and bevel scales and detent system provides quick and accurate cuts. Uniform marks from 52-degrees left to 60-degrees right with 10 adjustable miter detents set at most common cuts. The CM8S also has the same crosscut capacity (12-3/4-Inch) as a 10-Inch miter saw, at 30-percent the weight.

• CONVENIENT: The Bosch CM8S features a bevel lock lever and bevel turret stops located on the side of tool for quick and easy adjustments without reaching behind the saw. The saw also features easy-to-read miter and bevel scales.
• SUPPORTIVE: The miter saw provides an integrated expanding base extensions that expands up to 29-Inches left to right for additional work-piece support. Bevel Angle Range: -2° to 47°
• STABILITY: The Bosch CM8S miter saw features an adjustable front stabilizing foot, maintaining saw stability when performing slide cuts allowing maximum capacity.
• CONVENIENT: Features a miter detent override, an intuitive, easy to access thumb-actuated override as well as a clear lower guard for an unobstructed view of the saw in action. The detent system provides quick and accurate cuts.
• PORTABLE: The Bosch CM8S miter saw CM8S has the same crosscut capacity of 12-1/4 in. as a 10 inch miter saw but is 30% lighter. The Bosch exclusive design provides ultimate portability with a top carry handle and a weight of just 37 pounds

User questions & answers

Question:	Is it 8 or 8 1/2 " both sizes on description page
Answer:	England. My housemate is from Oxford & they are his favorite. I enjoy them, also.
Question:	What is the maximum depth of cut with the 8-1/2" blade - can it cut through a 4 x 4 (3-1/2") without having to turn the material
Answer:	Have only ordered currants.
Question:	can a metal cutting blade be used on this saw
Answer:	The 100g package is 2 strips of 5 biscuits each or 10 biscuits per 100g package. The case of 12 100g packages is the best deal due to shipping. Besides it is not that much really.
Question:	comparing this saw to other standard 10in sliding saws (dewalt, rigid), how does it compare for precision? (my existing harborfreight saw is terrible
Answer:	The Garibaldi Biscuits I recently received have an expiration date of July 2017, and I received them in September 2016. That's a long shelf life. Perhaps by the phrase "so stale", you may be referring to the crumbly nature of these biscuits. The biscuit part is a little thicker, and a little more crumbly than the old "Sunshine Raisin Biscuits" that were discontinued long ago. If by "stale" you mean crumbly, yes they are. I suggest eating them over a paper plate or over a sink - definitely NOT on the couch without a plate underneath.

Product features

Bosch CM8S 8-1/2 Inch Single Bevel Sliding Compound Miter Saw

The CM8S 8-1/2 In. single bevel sliding compound miter saw features a Bosch exclusive design delivering a well-balanced saw with a top carry handle at the center of gravity and weighs only 37 pounds.

These features easily provide one-handed portability on and off the job. Accessible controls make it easy to change bevel settings without reaching behind the saw.

The integrated expanding work piece supports, large easy to read miter and bevel scales, and detent system provides quick and accurate cuts.

• 🔥Ideal gift for your family & professional work.Usually ships within 5 days.
• ➤DOUBLE BEVEL CUTTING & RED LASER GUIDE - Double bevel cutting design allows you to adjust the head to left 45°and right 45°to meet different cutting wood, plastic tubing and soft metal. Integrated laser controlled by single switch, marking the cutting line, helping sawing long work pieces.
• ➤3800 POWER MOTOR & EFFICIENT FOR OPERATION - With 15 AMP MOTOR and full-size performance at 3800 RPM, TACKLIFE sliding compound miter saw provides powerful, smoother, faster cutting. The equipment of soft-grip cutting handle and base angle change handle for added comfort. SLIDING DESIGN can extend cutting flexibility and add cutting width.
• ➤EFFICIENT DUST COLLECTION SYSTEM - Efficient dust bag can collect more than 70% of the dust produced. The 35 mm dust port allows you to connect a vacuum cleaner to achieve the ideal 100% dust collection, keeping the environment clean.
• ➤40 T BLADE & EXTENSIBLE TABLE - The 305mm 40-tooth TCT strong blade is ideal for cutting wood, plastic tubing and soft metal.Equipped with allen wrench, the blade can be easily changed.The wide worktable provides better material support during operation, and the pair clamping system ensures the safety of the workpiece, allowing for more secure cutting operations.

Product features

TACKLIFE 12-inch Double-Bevel Sliding Compound Miter Saw - PMS03A

• Powerful Motor: Powerful 15 Amp/1700 W saw delivers full-size performance at 3500 rpm, making cutting faster, smoother.
• Double Sliding Design: Sliding design for extended cutting flexibility and added cutting width.
• Double Bevel Cutting: You can adjust the cutting angle from left 45° to right 45° to meet different cutting needs.
• Clamping Device: The clamping device system ensures the stability and ensures the safety of operation.
• Comfortable Handle: Soft-grip cutting handle and base angle change handle to increase users' comfort.
• 3 Metes Cable: 3 meters long cable for your cutting work to provide more convenience.

Double-Bevel Cutting

You can adjust the angle from -45°-0°-45° to meet different needs, In detail: 0° : 4.13 x 12.99 inch, 45°(L) : 2.36 x 12.99inch, 45°(R) : 1.38 x 12.99 inch.

Precise Miter Angle

Adjustable miter scale with positive stops (-45°/-22.5°/0°/+22.5°/+45°) allow users to quickly adjust the saw to do square cuts, bevel cuts and compound cuts.

Maximum Cutting Performance

90°x90°: 105x335 mm

90°x45°(L): 60x335 mm

90°x45°(R): 35 mmx335 mm

45°x90°: 105x235 mm

45°x45°(L): 60x235 mm

45°x45°(R): 35x235 mm

Large Extended Worktable

2 Extension rods for a larger working table to meet your requirement of large pieces cuts. Vice clamping system helps to fix the objects and free your hands.

Precise Laser Guide

Built-in laser controlled with single switch, it works once the machine is power on, making straight cuts more professional and easier.

90% DUST COLLECTION

Included dust bag helps to collect over 90% dust to maintain a tidy working space. 30mm dust port also can connect with household vacuum cleaner.

• 🔥Ideal gift for your family & professional work
• 🎅2 Adjustable Speed & 3 Blades: By pressing the switch, you can convert between the two speeds (3200 RPM or 4500 RPM) effortlessly for more precise cutting, high speed for wood while low speed for metal. While the Tacklife EMS01A miter saw is equipped with 3 blades: two 10" 40T TCT blades for wood and plastic, and one multifunctional 10" 48T TCT blade for versatile use. Richer accessories provide a wide range of choice for your operation.
• 🎅Bevel Cutting & Laser Guide: The free bevel range from 0° to 45° allows you to do bevel cutting for more purposes.The Angle of the miter table is -45°/ 0°/ + 45° and the positive angles in all these directions are 0°, 15°, 22.5°, 30° and 45°, respectively.The laser is attached to accurately track real-time position and allows you to perform precise cutting.
• 🎅Durable Tool & Iron Blade Guard: Solid iron self-retracting saw shield is more durable than plastic and transparent saws, the teeth cover of the cutting blade can protect you from accidental mishaps. The sliding cut design allows you to cut longer planks. Made of stainless steel castings, it provides you with a strong saw and is well suited to withstand the daily work of the work site.
• 🎅Dust-free Environment & Extension Table: An additional chip bag connects directly to the saw to help collect sawdust away from the workpiece during cutting. A 35mm dust port allows you to connect your vacuum cleaner with an adapter to capture more dust. An extension table with vice clamping provides better support and balance, increasing the stability during cutting.

Product features

TACKLIFE Advanced 10-Inch 15-Amp Multifunctional Sliding Miter Saw-EMS01A

- Uses: can be widely applied to various materials like wood, MDF, chipboard, plywood, blockboard, hardboard, wood with nails, 3 mm mild steel plates and more.

- If you have the demand to change the blade, calibrate the bevel angle and know more about operating instrument

Please refer to the video guide below.

Extensible Table

Extended platform on both sides adds the stability when cutting the long material. Vice clamping system helps to fix the object.

Laser Guide

Red laser guidance illuminates the cutting line, and add the accuracy when you operate in dim environment.

Portable Tool

Weigh only 31.5 pounds, it can be carried around the job-site effortlessly with the help of built-in portable handle.

Dual speed adjustment for versatile uses

Dual speed adjustment for multiple applications - The speed can be adjusted to meet different cutting requirements. - Speed 1(3200 RPM): Ideal for soft aluminum, soft steel and more. - Speed 2(4500 RPM): Ideal for wood, plastic, plywood and more. - Now experience the cutting-edge design.

Product description

The innovation responsible for both the unique appearance and the unparalleled level of performance is Bosch's patented Axial-Glide system. Beyond giving the CM10GD its distinctive profile, Bosch's Axial-Glide system eliminates three key challenges miter saw users have endured since the first slide systems debuted many years ago. While the traditional sliding compound miter saw approach enables users to make wider cross cuts, that system takes up more space and is prone to misalignment and stickiness over time. By replacing the sliding rail system with a hinged or articulating glide arm system - similar to the linkage used in a four-bar suspension design - Bosch created a more compact miter saw that delivers durable precision, remaining true and smooth over time. The Bosch CM10GD 10-Inch Dual Bevel Glide Miter Saw features a powerful 15-Amp, 4, 000-RPM motor with large easy-to-read bevel and miter scales allowing for precise, quick and easy adjustments: 52-Degree Left/60-Degree Right Miter Capacity; 47-Degree Left/47-Degree Right Bevel Capacity with marked detents and roof pitch angles. The tall sliding 4-1/4-Inch fences allow for increased cutting capacity when cutting tall base and crown moulding. With an ergonomic soft-grip ambidextrous trigger handle and a clear lower guard for unobstructed visibility throughout cut, the CM10GD provides maximum comfort for all-day use.

• ACCURACY: The Bosch-exclusive Axial-Glide System allows wider cross cuts and better alignment
• CONVENIENCE: Featuring large, upfront metal bevel controls and Square lock precision fences for precise, quick and easy adjustments. Complete with dust collection chute and vacuum adapter for easy clean-up.
• CONTROL: This miter saw provides accuracy and cutting control at all angles. Crown/chop lock locks head in place for maximum chop cutting capacity for upright base moulding and nested crown.Depth Front-to-Back, Not Including Arm:30 inch
• COMPACT: Featuring a compact design that replaces the sliding rail system, taking up to 10 In. less workspace than a slide miter saw. This Bosch miter saw is perfect for tight quarters where other saws just won’t do.
• COMFORT: Large, form-fitting ergonomic ambidextrous trigger handle with soft grip provides maximum comfort for all-day use while the clear lower guard allows for unobstructed visibility throughout the cutting job.

User questions & answers

Question:	What are the dimensions for this saw
Answer:	Maximum crosscut up to 2-in x 8-in (nominal) at 90 degrees and 2-in x 6-in at 45
Question:	I have looked everywhere and can't find the saw's footprint size. How wide and deep in the saw base not counting the glide system
Answer:	No it is not
Question:	I have a flip top cart, the with is about 24 inch, can this saw fit on that
Answer:	yes
Question:	What is the maximum board thickness this saw can cut? This specification is listed nowhere for some reason
Answer:	yes

Product features

Bosch CM10GD 10-Inch Dual Bevel Glide Miter Saw

The Bosch CM10GD 10-inch Dual-Bevel Glide miter saw provides power and versatility. Thanks to the compact design and the innovative Axial-Glide System, this unit provides smooth cutting control in up to 10 inches less workspace than other miter saws, so users are able to work productively in hallways and other tight quarters. The saw delivers 4,800 no load rpm with outstanding cut capacity – 12-inch horizontal capacity (nominal), 5-1/2-inch vertical capacity against the fence (base), and a 6-inch crown capacity against the fence (45 degree spring).

Includes

10-Inch Dual Bevel Glide Miter Saw, 60-Tooth Blade, Material Clamp, Dust Bag

Axial-Glide System

The innovative Bosch Axial-Glide System gives the user durable precision in a compact workspace. Replacing the sliding rail system with a hinged or articulated glide arm system saves up to 10 inches of working room while giving the user enhanced alignment and a smooth glide for the life of the unit. As a result, users produce smooth cuts and have complete control over the saw's cutting motion.

Flexibility and Ease of Use

The all-metal bevel lock lever and range selector was designed to be upfront on this unit, to enable fast and easy bevel settings without reaching around behind the saw. The tall 4-1/4-inch sliding fences also support quick bevel set-ups, professional level precision and increased crown molding capacity.

Lock and Chop

For the utmost in chop cutting capacity for a 10-inch miter saw, the Bosch CM10GD has a crown/chop lock that locks the head in place. This enables users to power through upright base molding and nested crown molding. The adjustable miter detents with easy-read markings let you accurately set cuts up to 47 degrees left or right. The common angles have miter detents at 0, 15, 22.5, 31.6 and 45 degrees on the right and left, and 60 degrees on the right.

Dust in the Bag

Like other Bosch models, this saw includes a combination dust chute and vacuum adapter to hook up your 1-14-inch and 35mm hoses. The "click and clean" platform ensures that the vac hose remains in place, so users can concentrate on making the cut.

Product description

Remember when your Miter saw could do it all? Create cuts at any angle with the WEN 12-inch dual bevel sliding compound Miter saw. Our powerful 15-amp motor slices through even the hardest of woods, providing 3800 blade rotations per minute. This versatile saw bevels and miters up to 45 degrees in either direction with a front bevel control for fast and easy adjustment. Cut boards up to 13-3/8 inches wide and 3-1/2 inches thick or make compound cuts (45 degree bevel and 45 degree miter) in boards 9-1/2 inches wide and 2-1/8 inches thick. The saw features 9 Miter stops: Two at 15 degrees, two at 22.5 degrees, two at 30 degrees, two at 45 degrees and one at 0. However, if a more unique angle is preferred, The Miter Lock still allows the saw to lock at any angle between those stops. This spacious saw also features a 7-1/2-inch crown molding nested capacity and a 6-3/4-inch base board vertical capacity. This package also includes a 12-inch 60-tooth carbide-tipped blade (W/ 1-inch arbor), two retractable Table extensions with work stops, one clamp assembly, a class II laser guide, an LED work light, and a dust bag. The onboard laser illuminates the line of cut for maximum accuracy while the LED work light brightens your work area for easy sawing. The spacious table features two adjustable extensions to increase the maximum work capacity up to 38 inches. The dust Collection port allows for connection to either the included dust bag or your dust Collection device of choice. And, because it’s a WEN product, your Miter saw comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.

• Powerful 15-amp motor cuts boards up to 13-3/8 inches wide and 3-1/2 inches thick
• Bevel and miter 45 degrees in either direction (featuring 9 miter stops)
• Onboard Class II laser guide combines with the LED work light for maximum clarity and precision
• Features a 7-1/2-inch Crown molding nested capacity and a 6-3/4-inch base board vertical capacity
• Includes a 12-inch 60-Tooth carbide-tipped blade, Two retractable table extensions with work stops, one clamp assembly, a dust bag, and a two-year warranty

User questions & answers

Question:	Cut steel
Answer:	Individual wrappers are 2 inches wide and 5 inches long.
Question:	What size is the arbor
Answer:	You can find the chocolate coated biscoff cookies at Target. They too are delicious.
Question:	Are the indents on the miter gauge tape or stamped
Answer:	I think you meant the actual cookies...same great, incredible size. Just means the 60 piece pack.
Question:	Will this saw cut a 4x4 piece of lumber
Answer:	That is correct! A helpful hint: at Christmas, the make Santa's with three per pack. We buy them when they go on sale by the box. Sold out now, but good to remember if you like them as well as we do!