10 best craftsman sliding miter saw

Product description

This CRAFTSMAN V20 20V max* 7-1/4 in. Cordless sliding miter saw is powered by a powerful motor running at 3, 800 RPM designed for cutting 2x dimensional lumber, hardwoods, baseboard and trim with ease. The sliding 7-1/4 in. Blade allows for a cross cut capacity of up to 8 in. While the 9 Miter detents and single bevel blade allow for angled cuts. The lightweight design coming in at 21.8 lbs. Coupled with the side carry handles make this unit extremely portable. The LED light eliminates shadows and provides an accurate and easy Cut line to follow.

• Part of the V20 cordless system
• 7-1/4in. V20 20V max* miter saw has a powerful 3, 800 RPM motor for cutting 2x dimensional lumber, hardwoods, baseboard and trim with ease
• Slide capacity allows for 8 in. Cross cut at 90 degrees and 5.5 in. Cross cut at 45 degrees
• Capacity to cut 3-5/8 in. Nested Crown and 3-1/2 in. Baseboard vertically
• Lightweight design at 21.8 lbs. With side carry handles make this unit extremely portable
• 3 Year Limited Warranty, refer to "Warranty & Support" section below for full details

User questions & answers

Question:	does this saw comes with a charger?? Thanks
Answer:	Yes, the CMCS714M1 comes with a charger.
Question:	I just bought a craftsman v20 cordless brad nailer kit, 18ga (cmcn618c1) the battery is compatible with this miter saw
Answer:	Yes
Question:	does this saw have a opional plug for a wall socket
Answer:	It is as described, CORDLESS! This means it takes a V20 Battery. It's a great saw especially for working with moldings using miter cuts. The battery lasts all day and then some. I would have an extra battery just in case.
Question:	How wide is the saw looking at it from the front
Answer:	21 "

Product description

The Metabo HPT C10FCGS 10-inch Compound Miter Saw is lightweight for easier transport. The 15 amp motor generates a no-load speed of up to 5000 RPM for making crosscuts and miter cuts with ease. This miter saw offers a bevel range of 0-45 degrees to the left to provide clean and accurate bevel cuts. It is designed for woodworkers who demand precision, reliability and versatility on the job.

• 10" Compound Miter Saw
• MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM
• LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability
• MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility
• BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts
• LARGE TABLE: Offers better material support with vice clamping system to secure work piece
• THUMB ACTUATED POSITIVE STOPS: For quick miter adjustments

User questions & answers

Question:	Does this take any 10” blade
Answer:	Yes, it will take any 10" blade with a 5/8" arbor.
Question:	does this come ready to use or is assembly required
Answer:	Hi there, there is a small amount of assembly required. Please refer to the owner's manual for setup instructions. Hope this helps!
Question:	Is the depth of cut adjustable
Answer:	Depth can't be adjusted on this model number. You will need a sliding compound miter saw.
Question:	According to the instruction manual, the item includes a 10mm box wrench to tighten the nylon nut M6 for the sub fence installation. I used my own too
Answer:	Yes, but using yours is fine. Theirs is included simply for convenience if you didn't have one.

Product features

45 Degree Bevel Range

To the left to provide clean and accurate bevel cuts

Horizontal handle

For a secure hold

15 Amp motor

Delivers high power for the toughest cutting jobs

Large table

for better material support with vice clamping system to secure work piece

Product description

15 Amp 14-in. Chop saw provides the power and capacity to maintain performance and durability on the jobsite. Saw features an extra-wide, solid steel base that offers stability when cutting longer materials. For ease of the user The lightweight design allows for easy storage and portability.

• 15 amp 14-in. Chop saw provides the power and capacity to maintain performance and durability on the jobsite. Saw features an extra-wide, solid steel base that offers stability when cutting longer materials. For ease of the user The lightweight design allows for easy storage and portability.
• Overload capacity: High performance 15 amp motor delivers a high overload capacity with 3800 RPMs
• Added convenience: spindle lock allows the user The convenience to change the cutting wheel quick and easy
• Maximum user protection: Heavy duty guard for maximum user protection
• Quick-release: quick-release material Clamp allows for easy material cutting & removal

User questions & answers

Question:

does this have a Quick-Change blade change system lets users change wheels without a wrench

Answer:

This specific chain does not fit just any 18" or 20" tire size !!! Please keep in mind that there are three (3) different measurements to determine tire size. There is the width, the height from rim to tread and the wheel diameter. A change in any one of these can affect the size of a chain that will fit. You must go to the chain manufacturer's sizing chart with your exact tire size and look for the chain that will fit that specific tire. Never try to place chains on tires they were not designed to fit as it could be very dangerous and cause possible damage to your vehicle. Check out the Amazon.com Snow Chain Buying Guide for even more info.

Product description

The DW715 12 in. Single-Bevel Compound Miter saw is powered by a 15 amp motor to drive 4, 000 RPM, delivering Extended power and durability. Features stainless steel Miter detent plate and cam Miter Lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 5-1/2 in. Of base molding vertically and 5-1/2 in. Of crown molding vertically nested. Lightweight design and built-in carry handle for portability.

• Power and durability: 15 amp, 4,000 Rpm motor
• Miter detent plate improves productivity and ensures cutting accuracy: Adjustable stainless steel miter detent plate with 14 positive stops
• Miter dentent override that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the Miter detents. Arbor size is 5/8 inches
• Tall sliding fences that support crown molding up to 5 1/4 inch nested and base molding up to 6 1/2 inch vertically against the fence while easily sliding out of the way for bevel cuts
• Cross cut capacity up to 2x8 inch dimensional lumber at 90° and a 2x6 inch dimensional lumber at 45°
• Machined base fence support maintains fence perpendicularity with blade for cutting accuracy
• Bevels to the left up to 48° and to the right up to 3°, with positive stops at 0°, 45° and 33.9° for cutting crown molding laying flat with 4 hardened steel bevel stops at 0°, 33.9°, 45° and 48° that delivers versatility at most common bevel angles
• Includes a carbide blade, dust bag, blade wrench, vertical clamp and comfortable side handles in the base

User questions & answers

Question:	Is the current model that is shipping type 1 or type 20. If you look up the parts diagram the type 20 has a different slide mechanism part number
Answer:	I bought a new one today from a lumberyard and it is a Type 1. (says right on the sticker on the motor) Not sure if that means the slide mechanism is better or worse than the Type 20. I would assume it was made in 2014 because there is a "Dewalt use only" tag on the box which starts with 2014. Not sure if a "fresher" saw is a Type 20
Question:	Can xps be added, i know dewalt makes a kit to add it to some saws, but this model was not listed
Answer:	mmToolparts actually sells a kit (3 proprietary DeWalt parts + their wiring harness) for less than $70. They have videos on their website that show how to install the parts on DW716, DWS779, and DWS782 saws. You will need some additional tools (torx screw drivers or torx bits, wire strippers/cutter/crimper) and somewhat mechanically inclined. Just google "DWS779 xps light kit" and they should be the top result. This might be an easier option versus going to a DeWalt service center in the post pandemic world.
Question:	Does this miter saw come with a laser or any guiding system
Answer:	It does not come with any laser for guidance. You may find my answer a bit crude, I've been using miter saws for many years and the best guiding system I found to work is my/your eyes. Having lasers or no lasers you still need to use your eyes to get the work piece spot on near the cutoff point. Hope this helps!
Question:	Is there an LED cut line
Answer:	You can add the LED light to this saw. Not a laser but a shadow light that show exactly where the saw blade will cut. I just did it last night. Parts can be had for about $70. This basically turns it into a model 780 which is much more expensive. Pretty simple to add.

Product description

Yes, Universal design means brackets fit most 10" and 12" miter saws along with other bench top tools Support arms extend up to 80" to accommodate longer work pieces Spring-loaded legs easily fold up to store in your shed or garage 2 height-adjustable 11.5" smooth steel rollers help you feed long work pieces Weighs less than 25 lbs. for easy transporting from job to job Supports up to 330 lbs

User questions & answers

Question:	can you add wheels to it
Answer:	This should be clearly marked on the back of the packaging but batteries typically don’t sit on a shelf too long prior to purchase due to their wide range of devices requiring them. As such, you could expect them to manufactured typically no later than the previous year, still offering you 9-10 years of shelf life. I am not the manufacturer and these are my personal observations.
Question:	What is the working height of stand
Answer:	Not sure why description says it can be but if you look closer on the battery itself, “it says that batteries are not rechargeable.” Use both AAA and AA, batteries are of good quality.
Question:	Will this stand work DeWalt model 715 miter saw
Answer:	To me it make little difference. What does matter is that I know for a fact this style, this company makes superior batteries. I've tested with the many uses I have in my home. It's the truth! I recently bought the 96 count pack for 4 friend each. I doubt that they'll prove they're worth as I do. That makes little difference. I bought these gifts because I wanted to share top quality - which is what these are.
Question:	will a delta miter saw work with this
Answer:	Impecca AA Batteries Have a 10 Year Shelf Life (when not used and stored properly)

Product description

Remember when your Miter saw could do it all? Create cuts at any angle with the WEN 10-inch single bevel sliding compound Miter saw. Our powerful 15-amp motor slices through even the hardest of woods, rotating the blade up to 4500 times per minute. This versatile saw miters up to 45 degrees in either direction and bevels up to 45 degrees to the left. Cut boards up to 12 inches wide and 3-1/2 inches thick or make compound cuts (45 degree bevel and 45 degree miter) in boards 8-1/4 inches wide and 2-1/5 inches thick. The saw features 9 positive Miter stops: Two at 15 degrees, two at 22.5 degrees, two at 30 degrees, two at 45 degrees and one at 0. However, if a more unique angle is preferred, The Miter Lock still allows the saw to lock at any angle between those stops. This spacious saw also features a 7-1/2-inch crown molding nested capacity and a 6-3/4-inch base board vertical capacity. The compact design makes for great portability and storage between uses. Measuring in at 17.5 by 28 by 16.5 inches, you’ll never have to worry about your rail system interfering with your wall again. This package also includes a 10-inch 40-Tooth carbide-tipped blade (W/ 5/8-inch arbor), two table extensions, one clamp assembly, a class II laser guide, a dust port adapter, and a dust bag. The onboard laser illuminates the line of cut for maximum accuracy while the dust Collection port allows for connection to either the included dust bag or your dust Collection device of choice. And, because it’s a WEN product, your Miter saw comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.

• Powerful 15-amp motor cuts boards up to 12 inches wide and 3-1/2 inches thick
• Miter 45 degrees in either direction (featuring 9 miter stops) or bevel 45 degrees to the left
• Onboard Class II laser guide illuminates your line of cut
• Features a 7-1/2-inch Crown molding nested capacity and a 6-3/4-inch base board vertical capacity
• Includes a 10-inch 40-Tooth carbide-tipped blade, Two table extensions, one clamp assembly, a dust bag, a dust port adapter, and a two-year warranty

User questions & answers

Question:	Cut steel
Answer:	Thin steel you can cut but have to have the correct blade that is make to cut steel.
Question:	What size is the arbor
Answer:	Arbor size is standard 5/8"
Question:	Are the indents on the miter gauge tape or stamped
Answer:	Stamped
Question:	Will this saw cut a 4x4 piece of lumber
Answer:	Yes. With ease

Product description

This CRAFTSMAN V20 MAX 18GA cordless finish nailer's cordless design eliminates the need for compressors, hoses, or costly Gas cartridges. The motor delivers consistent power firing in various weather conditions and materials. The extensive runtime on a single battery and Fast shot speed allow for less downtime on the jobsite. The single tool-free depth setting makes adjusting your nail depth quick and simple, while the other tool-free settings make potential nail jams or stalls easy to fix. The cordless finish nailer is lightweight and well balanced, making this product very comfortable to use for prolonged time.

• CRAFTSMAN V20 MAX cordless nailer drives adhesive collated 18 gauge finish nails
• Fully cordless design eliminates the need for compressors, hoses or costly Gas cartridges
• Provides consistent firing power in various climate conditions and materials
• Tool-free depth settings for quick set up and consistent results
• Tool free jam and stall settings for ease of use and improved efficiency
• Lightweight with optimal center of gravity provide optimal balance and comfort in hand during use
• Contoured overmolded handle for added comfort during use

User questions & answers

Question:	Will DeWalt battery work
Answer:	No, the CMCN618C1 should only be used with the CRAFTSMAN battery.
Question:	Can this be used to attach wall panel to an old shipping pallet? I'm building a bar. Thanks
Answer:	Absolutely yes! I use this one every single day for my projects, shiplap, pallets, plywood, crown molding, etc. just be sure to get the right nail size and go ahead!!
Question:	Can this tool work with the Black and Decker 20 volt battery for the Matrix system
Answer:	No. The batteries for DeWalt, Black & Decker, Porter Cable, and Craftsman do not cross brands and are not compatible.
Question:	Does this unit come with a battery and charger
Answer:	Yes, The CMCN618C1 comes with one battery and one charger.

Product description

This 12-Inch compound miter saw, model 3821, includes the Quick Mount System, a laser, extension rails and a powerful motor that make it an ideal miter saw for any intermediate Dyer or woodworker.

• Laser cutline guide for fast and accurate cuts
• 9 positive stops for setting common miter angles
• Powerful 15 amp motor with 4,500 RPM
• Table extension with left/right extension rails for long, large work pieces
• Quick-mount system for quick and easy setup on SKIL miter saw stand (3302-02)

User questions & answers

Question:	Some specs I saw said it would cut up to 8” vertically laid against the fence base, is that true
Answer:	HI Our 61900Q is 3600 RPM's thank you
Question:	will this cut 6 inch laminate flooring with one cut? and on a
Answer:	Yes the 61900 can do plunge cuts. There is a knob that can be loosened so the head can move upward then down. Reference page 22 (Plunge Cut) in owner’s manual http://www.qep.com/wp-content/uploads/2015/09/OM_61900Q_123_123.pdf
Question:	Blade included
Answer:	Good day,The 61900Q will do plunge cuts.Thank you for choosing QEP.Customer Service
Question:	I am confused. Does it come with a stand? It seems to say that but then they are referring to a quick mount stand like it was a seperate product
Answer:	metal cutting application with this product are dry only.

Product features

The Ultimate Miter Saw Design

The SKIL 3821-01 12-Inch Quick Mount Compound Miter Saw with Laser comes with a Powerful 15 Amp Motor with 4,500 RPM. This miter saw by SKIL also comes with a Quick-Mount System for quick and easy setup on SKIL miter saw stand.

Easy to Assemble

Simple to adjust and convenient to use, the SKIL 3821-01 12-Inch Quick Mount Compound Miter Saw with Laser is highly recommended for woodwork and other fabrication. It has an innovative design with positive stops for setting common miter angles. Well-built of heavy-duty and tough material, this miter saw speaks well of its safety.

A Stunning Laser

Use the Positive stops for setting common miter angles is super-efficient as it also includes a Laser Cutline Guide for fast and accurate and precise cuts.

• 🔥Ideal gift for your family & professional work
• 🎅2 Adjustable Speed & 3 Blades: By pressing the switch, you can convert between the two speeds (3200 RPM or 4500 RPM) effortlessly for more precise cutting, high speed for wood while low speed for metal. While the Tacklife EMS01A miter saw is equipped with 3 blades: two 10" 40T TCT blades for wood and plastic, and one multifunctional 10" 48T TCT blade for versatile use. Richer accessories provide a wide range of choice for your operation.
• 🎅Bevel Cutting & Laser Guide: The free bevel range from 0° to 45° allows you to do bevel cutting for more purposes.The Angle of the miter table is -45°/ 0°/ + 45° and the positive angles in all these directions are 0°, 15°, 22.5°, 30° and 45°, respectively.The laser is attached to accurately track real-time position and allows you to perform precise cutting.
• 🎅Durable Tool & Iron Blade Guard: Solid iron self-retracting saw shield is more durable than plastic and transparent saws, the teeth cover of the cutting blade can protect you from accidental mishaps. The sliding cut design allows you to cut longer planks. Made of stainless steel castings, it provides you with a strong saw and is well suited to withstand the daily work of the work site.
• 🎅Dust-free Environment & Extension Table: An additional chip bag connects directly to the saw to help collect sawdust away from the workpiece during cutting. A 35mm dust port allows you to connect your vacuum cleaner with an adapter to capture more dust. An extension table with vice clamping provides better support and balance, increasing the stability during cutting.

Product features

TACKLIFE Advanced 10-Inch 15-Amp Multifunctional Sliding Miter Saw-EMS01A

- Uses: can be widely applied to various materials like wood, MDF, chipboard, plywood, blockboard, hardboard, wood with nails, 3 mm mild steel plates and more.

- If you have the demand to change the blade, calibrate the bevel angle and know more about operating instrument

Please refer to the video guide below.

Extensible Table

Extended platform on both sides adds the stability when cutting the long material. Vice clamping system helps to fix the object.

Laser Guide

Red laser guidance illuminates the cutting line, and add the accuracy when you operate in dim environment.

Portable Tool

Weigh only 31.5 pounds, it can be carried around the job-site effortlessly with the help of built-in portable handle.

Dual speed adjustment for versatile uses

Dual speed adjustment for multiple applications - The speed can be adjusted to meet different cutting requirements. - Speed 1(3200 RPM): Ideal for soft aluminum, soft steel and more. - Speed 2(4500 RPM): Ideal for wood, plastic, plywood and more. - Now experience the cutting-edge design.

Product description

The 12 in. Dual-bevel Glide Miter saw features the smooth cutting motion, accurate performance and space-saving design of Bosch Patented axial-glide system.

• Axial glide system: The patented glide system allows wider cross cuts and better alignment while also being compact; This saves you 12 inch of valuable work space; Bosch glide miter saw also offers unmatched smoothness of cut
• Capacity: Expanded cutting capacity 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring
• Adjustable: The GCM12SD miter saw provides easy adjustments with a large easy to read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts; Category best 90 percentage dust collection optimized for cutting 2x material with a vacuum
• Precision: Square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support
• Ease of use: Upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw

User questions & answers

Question:	is ther laser on this saw
Answer:	The UK version (Bosch GCM 12 GDL Professional) ships with an included non battery powered laser that produces two lines that bracket the saw kerf. Not sure why Bosch made the laser layout tool an extra for USA version. There are other differences between these models and the UK 240V version has more options as stardard equipment.
Question:	dose this saw have a depth stop on it so you can create a dado
Answer:	Yes, it has a depth stop. The saw cuts very nice and it glides effortlessly, u must adjust the drag on it. When cutting dadoes, it does not hang up like rail type saws when the fine dust finds its way into the rail bearings like the Dewalt I used to use. It was an expensive investment in a saw, but i really like it so much more then any of my previous sliding compound saws.
Question:	Where is this saw made? Asia/US/EU
Answer:	Best miter saw you can buy. Doesn't matter where it was made
Question:	Why buy this miter saw versus the Bosch
Answer:	SGT .several reasons i chose this saw over the 5312. first off I run a high end custom cabinet shop and this saw sees very heavy uses. The sliding rails on the type of the Bosh 5312 always get dust in the bearings and with time the sliding action sticks and must be taken apart, the bearings cleaned and re-lubed with dry silicone lubricant. That is what my experience was with my last 3 sliding saws, (Dewalt, Ryobe and Dewalt pro). the other thing i love about the Bosch GCM12SD its there are no rails sticking out the back of the saw, and the clearance from the wall where my saw sits is no longer needed. It was a great investment even though its on the pricy side. i love the accuracy and the performance, I change to a better cutting blade and the performance got better. I switch from the stock blade and now run a Forrest CM12806115 Chopmaster 12 inch 80 tooth blade cleaner cuts and very smother with no tear outs. i hope this helps you

Product features

Bosch 12-Inch Dual-Bevel Glide Miter Saw (GCM12SD)

The Bosch GCM12SD is a 12-Inch Dual-Bevel Glide Miter Saw that features a smooth cutting motion, accurate performance and a space-saving design of the Bosch-exclusive Axial-Glide System. Pre-aligned Squarelock fences help the saw maintain precision throughout its life; a soft-grip ambidextrous handle along with a combination dust chute and vacuum adaptor add to user comfort. The saw also offers a large cutting capacity, easy-to-read bevel and miter scales with detents at common angles, and easy-access upfront controls.

Compact cutting

Featuring a Bosch-exclusive Axial-Glide system for durable precision, complete control, and compact workspaces.

Precise control

High-precision Squarelock quick-release fence aligns fence 90 degrees to saw’s table and requires no adjustment; one-touch lock/unlock to slide fence for added support.

Versatile saw

With a 14-Inch expanded horizontal cutting capacity, 6-1/2-inch vertical capacity, and a 6-1/2-inch crown capacity (45-degree spring), this miter saw is perfect for any variety of cuts.

Adjustable

The saw provides easy adjustments with a large easy-to-read uniform bevel and stainless steel miter scales with marked detents and roof pitch angles.