12 best chop saw woods

Product description

The DEWALT DWS779 12" Sliding compound Miter saw features a powerful 15 amp, 3,800 RPM motor that delivers extended power and durability. It has a super-efficient dust collection system that captures over 75 percent of dust generated. This miter saw also offers an exclusive back fence design which cuts up to 2x14 dimensional lumber at 90° and 2x12 at 45°.

• Your purchase includes: 1 CDEWALT DWS779 sliding compound cord miter saw, 12-inch, carbide blade, 1 blade wrench
• Tool dimensions: 17” H x 24.75” L. Tool weight: 56 pounds; Maximum cutting thickness: 6.75 inch
• Other specifications: 15 Amps, 12” blade diameter, 5/8” or 1” Arbor size. 3800 RPM motor. Type of milter saw: Slide
• Exclusive back fence design cuts up to 2x14 dimensional lumber at 90 degree and 2x12 at 45 degree. Miter saw does not come with LED (sold separately) or laser cutting guide
• Super-efficient dust collection system captures over 75 percent of dust generated
• Backed by Dewalt's 3 year limited warranty

User questions & answers

Question:	Is the current model that is shipping type 1 or type 20. If you look up the parts diagram the type 20 has a different slide mechanism part number
Answer:	I bought a new one today from a lumberyard and it is a Type 1. (says right on the sticker on the motor) Not sure if that means the slide mechanism is better or worse than the Type 20. I would assume it was made in 2014 because there is a "Dewalt use only" tag on the box which starts with 2014. Not sure if a "fresher" saw is a Type 20
Question:	Can xps be added, i know dewalt makes a kit to add it to some saws, but this model was not listed
Answer:	mmToolparts actually sells a kit (3 proprietary DeWalt parts + their wiring harness) for less than $70. They have videos on their website that show how to install the parts on DW716, DWS779, and DWS782 saws. You will need some additional tools (torx screw drivers or torx bits, wire strippers/cutter/crimper) and somewhat mechanically inclined. Just google "DWS779 xps light kit" and they should be the top result. This might be an easier option versus going to a DeWalt service center in the post pandemic world.
Question:	Does this miter saw come with a laser or any guiding system
Answer:	It does not come with any laser for guidance. You may find my answer a bit crude, I've been using miter saws for many years and the best guiding system I found to work is my/your eyes. Having lasers or no lasers you still need to use your eyes to get the work piece spot on near the cutoff point. Hope this helps!
Question:	Is there an LED cut line
Answer:	You can add the LED light to this saw. Not a laser but a shadow light that show exactly where the saw blade will cut. I just did it last night. Parts can be had for about $70. This basically turns it into a model 780 which is much more expensive. Pretty simple to add.

Product description

The Metabo HPT C10FCGS 10-inch Compound Miter Saw is lightweight for easier transport. The 15 amp motor generates a no-load speed of up to 5000 RPM for making crosscuts and miter cuts with ease. This miter saw offers a bevel range of 0-45 degrees to the left to provide clean and accurate bevel cuts. It is designed for woodworkers who demand precision, reliability and versatility on the job.

• 10" Compound Miter Saw
• MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM
• LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability
• MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility
• BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts
• LARGE TABLE: Offers better material support with vice clamping system to secure work piece
• THUMB ACTUATED POSITIVE STOPS: For quick miter adjustments

User questions & answers

Question:	Does this take any 10” blade
Answer:	Yes, it will take any 10" blade with a 5/8" arbor.
Question:	does this come ready to use or is assembly required
Answer:	Hi there, there is a small amount of assembly required. Please refer to the owner's manual for setup instructions. Hope this helps!
Question:	Is the depth of cut adjustable
Answer:	Depth can't be adjusted on this model number. You will need a sliding compound miter saw.
Question:	According to the instruction manual, the item includes a 10mm box wrench to tighten the nylon nut M6 for the sub fence installation. I used my own too
Answer:	Yes, but using yours is fine. Theirs is included simply for convenience if you didn't have one.

Product features

45 Degree Bevel Range

To the left to provide clean and accurate bevel cuts

Horizontal handle

For a secure hold

15 Amp motor

Delivers high power for the toughest cutting jobs

Large table

for better material support with vice clamping system to secure work piece

Product description

Makita’s 10” Compound Miter Saw (model LS1040) combines power, performance, and ease of use for most common miter cuts including a range of applications including woodworking, cabinetry, deck building, framing, and more. 15 AMP Motor for Improved Performance The LS1040 has a dynamically balanced 15 AMP direct drive motor with 4,600 RPM for improved performance. The direct drive motor with soft start delivers smoother start-ups and constant power, with no belts to slip or replace. Precise Miter and Bevel Cuts The LS1040 has a dual post compound pivot arm, with bevel cuts up to 45° to the left. Miter adjustments range from 0°-45° (left) and 0°-52° (right), with 9 positive miter stops at 15°, 22.5°, 30°, and 45° (left or right), and 0° (90° cuts). The precision-machined aluminum base ensures accurate cuts. Ease-of-use and comfort features include a fluorescent light that works independently of the blade rotation to clearly illuminate the work surface, and a compact size (weighs only 27.3 lbs.) for easy portability. Best in Class for a Range of Applications The LS1040 is engineered for a broad range of trades, including finish carpenters, professional woodworkers, case and base installers, cabinet installers, decking and flooring applications, siding installers, general contractors seeking a best-in-class 10” compound miter saw for the jobsite or the benchtop.

Makita's LS1040 10-Inch Compund Miter Saw combines power, performance, and ease of use for common miter cuts, including a range of applications in woodworking, cabinetry, deck building, framing, and more.

View larger

LS1040 Features PERFORMANCE - Powerful 15 amp direct-drive motor and 4,600 rpm for improved performance CAPACITY - Miter cuts 0° - 45° left and 0° - 52° right; 9 positive stops for common miter cuts ACCURACY - Dual post compound pivot arm, bevel cuts up to 45° to the left PORTABILITY - Weighs only 27.3 pounds INCLUDES - C.T. blade, vertical vise, wrench, triangular ruler, and dust bag

Tool Specifications Blade Diameter 10" Arbor 5/8" Max. Cutting Capacity (Bevel/Miter) 90°/90° 2-3/4" x 5-1/8" Max. Cutting Capacity 45°/45° 1-3/8" x 3-5/8" No Load Speed 4,600 rpm AMPS (120V) 15 Dimensions (L x W x H) 20-7/8" x 18-3/4" x 21" Net Weight 27.3 lbs.

15 AMP Motor for Improved Performance

The LS1040 has a dynamically balanced 15 amp direct-drive motor with 4,600 rpm for improved performance and is engineered to never slip or bog down like belt-drive units. The electronic speed control maintains constant speed under load, and the soft-start technology is engineered for smooth start-ups.

Precise Miter and Bevel Cuts

The LS1040 has a dual post compound pivot arm with bevel cuts up to 45 degrees to the left. Miter adjustments range from 0 to 45 degrees left and 0 to 52 degrees right, with 9 positive miter stops at 15, 22.5, 30, and 45 degrees (left or right), and 0 degree (90-degree cuts). The engineered aluminum base ensures accurate cuts. Ease-of-use and comfort features include a fluorescent light that works independently of the blade rotation to clearly illuminate the work surface and a compact size (weighs only 27.3 pounds) for easy portability.

Best in Class for a Range of Applications

The LS1040 is engineered for a broad range of trades, including finish carpenters, professional woodworkers, case and base installers, cabinet installers, decking and flooring applications, siding installers, and general contractors seeking a superior 10-inch compound miter saw for the jobsite or the benchtop. The LS1040 is just another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita Saws

Cut after cut, Makita saws deliver power, performance, and capacity with less weight and more ease-of-use features. Makita has a full range of corded and cordless saws and blades for cutting wood, metal, and masonry, including table saws, miter saws, reciprocating saws, circular saws, jig saws, metal cutting saws, plunge saws, and more, as well as a complete line of blades and accessories.

About Makita

Makita is a worldwide manufacturer of industrial-quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are compact and energy efficient, yet deliver industrial-strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best-in-Class Engineering.

Warranty

Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.

What's in the Box

Makita LS1040 10-Inch Compound Miter Saw, 10-inch C.T. blade, vertical vise, wrench, triangular ruler, and dust bag.

• Powerful 15 AMP direct drive motor for improved performance; 4,600 RPM
• Dual post compound pivoting arm
• Miter cuts 0-45 left and 0-52 right
• Positive miter stops at 9 settings: 15, 22.5, 30, 45, right or left and 0 (90 cuts)
• Bevel cuts up to 45° to the left
• Weighs only 27.3 lbs. for easy portability
• Precision machined aluminum base ensures accurate cuts

User questions & answers

Question:	in my country, we use 220v, can I plug this item to my current circuit
Answer:	No. 120 volts AC single phase
Question:	As of Mar 2018, Does it still cut an arc when sliding, as opposed to a straight line
Answer:	Mine does not. Be careful with damaged packaging and saw impact
Question:	Does the laser show both sides of the blade, that is is it a dual laser? Also does the laser have a separate switch or is it centrifical
Answer:	The laser is on one line only and it can be switched left or right of the blade. There is a separate ON/OFF switch for the laser
Question:	will it cut 4in x 4 in timber
Answer:	Yes, if you make 2 cuts. The only saw I know of that will do it in 1 cut is a Chop saw with a 12" blade. Or a Radial arm saw. But it needs a 12' blade too.

Product description

Specifications:

Tool Name： Mini Cut Off Saw;

Arbor： 3/8'';

Blade Diameter: HS S 2'';

Blade Thickness: 0.020'';

Blade Type: Multi Tooth;

Power Source: 100 ~120V AC 50/60Hz;

220 240V AC 50/60Hz  150W;

Max. RPM: 6000;

Cutting Depth: 1/2'';

Miter Gauge: 0-45;

Base: 5-1/2” L, 5''W;

Overall: 9''ength, 5-1/2'' W, 6-3/4'' H;

Cord: 2 Prong, 71'', 18AWG;

Net Weight: 3LBS.

Features:

Cuts to a depth of 1/2 in. - ideal for frames and molding

Make miter cuts from 0° to 45°

Fast 7800 rpm and a 3/8-Inch arbor

2-Inch blade diameter and a .020 inch blade thickness

Cuts wood, brass & similar light materials with smooth, precise cuts; no sanding needed!

Application:

This Mini Benchtop Cutoff Miter Saw is a mini benchtop mounted cut-off saw with high-speed steel blade for cutting metal, 

wood, plastic and other light materials.

Package Included:

1 x Mini Bench Cut-off Saw Set

1 x Instructions & Parts Book

• ➽【Best Bench-top Saw Choice】- Accurate cutting saw tool for cutting metal, aluminum, lead, resin, fiberglass, copper, plastic and wood!
• ➽【Accurate Cutting Saw Tool】- Cuts to a depth of 1/2 in, ideal for frames, molding & other light-duty cuts. It has adjustable miter gauge, make miter cuts from 0°to 45°. Perfect for all your DIY projects.
• ➽【Main Parameter】- Maximum speed 7800 rpm and a 3/8-Inch arbor, 2-Inch blade diameter and 0 .02 inch blade thickness.
• ➽【Portable to Carry】- Compact size and portable, easy to cuts steel, brass, wood & more with smooth, precise cuts; no sanding needed!
• ➽【Satisfied Guarantee】- We provide lifetime money back guarantee, for any reason you're not completely satisfied, you can ask for a replacement or full refund.

Product description

The JET dual-bevel sliding compound miter saw is one the most versatile saws in your shop. It efficiently cuts miters, bevels, straights, and compounds with precision and accuracy over a hand saw. This saw is a workhorse in your shop that is also portable enough to take with you when you need a great saw on the job.

• DUAL BEVEL CAPABILITY WITH UP FRONT CONTROLS: Maximize cutting of compound angles.
• SINGLE-MOTION THUMB LEVER: Change miter angles quickly.
• ENCLOSED LINEAR BEARINGS: Allows for smooth and controlled slide operation.
• ERGONOMIC, AMBIDEXTROUS, RUBBER GRIP HANDLE: For maximum control.
• HEAVY-DUTY 15-AMP MOTOR: Easily powers through wood.

User questions & answers

Question:	What is the maximum cutting degree left and right
Answer:	I'm not sure. They fit my FN250A. If you pull up the exploded view on line it says that the part # you want is 904725. I would message Porter Cable to make sure.
Question:	Is the bevel mechanism in the front of the saw or the back
Answer:	No, it is not compatible with a C3151 Porter Cable compressor.
Question:	What is the arbor size
Answer:	This part is not compatible with the FN250C, you will need part number #649695-00.
Question:	Where is it made
Answer:	No, it is only compatible with the FN250 and FN251.

• Cuts wood, brass & similar light materials with smooth, precise cuts; no sanding needed!
• Cuts to a depth of 1/2 in. - ideal for frames, molding & other light-duty cuts.
• Make miter cuts from 0° to 45°
• Fast 7800 rpm and a 3/8-Inch arbor
• 2-Inch blade diameter and a .020 inch blade thickness

User questions & answers

Question:	Does it cut craft size wooden planks
Answer:	I think it might have at least standard warranty from Amazon. It's my second purchase, girlfriend and daughter. Looks nice
Question:	Would this be good for cutting trim
Answer:	I found a cheap and beautiful jewelry website I have bought 17, the quality is good, and the logistics is very fast! The price is very cheap.
Question:	Can jt cut 4 in baseboard
Answer:	Thank you for your inquiry. Yes, the links are hollow as this the traditional method for manufacturing Byzantine jewelry. The weight for the 7 inch length is 19 grams. The 8 inch weighs 21.3 grams.
Question:	Will this work for cutting down .223 brass
Answer:	Yes it will.

Product features

Fast & Powerful

A fast 7800 rpm and a 3/8-inch arbor provide the power you need for light-duty craft cutting. The Hercules 929 mini benchtop cutoff saw cuts lead, plastics, resin, fiberglass and wood with smooth precise cuts that need no sanding.

Precision Cuts

The Hercules 929 Mini Cutoff Saw has a 2-inch blade diameter and a .020 inch blade thickness. It cuts wood, brass & similar light materials with smooth, precise cuts - no sanding needed!

Mini Miter Cuts

The Hercules 929 Mini Cutoff Saw has a 1/2-inch cutting depth and can make miter cuts from 0 to 45 degrees.

• WIDELY APPLICABLE - BEAMNOVA Electric Power Miter cuts a wide variety of material such as wood, metal, plastic and resin. Suitable for different shapes of material like pipe, squares tube, miniature molds and so on. Ideal for Small Hobby and DIY Crafts.
• COMPLET ACCESSORIES & PORTABLE - Measures only 10*5.5*6 in and weighs about 1.5kg / 3.3 lbs. Comes with 1 metal blade, 1 resin blade, 1 wrench, 1 clamping jig and 1 user manual.
• SMOOTH & PRECISE CUTTING - The attached angle gauge allows cutting from 0° to 45°. It makes precise cuts up to 1/2" deep. It can make a cutting so smoothly and accurately that you may never have to file or sand the cutting end any more!
• POWERFUL MOTOR TO SAVE TIME - Generates 4000-10000r/min and the 2-inch high-speed steel blade can cut through a variety of materials in a really short time. Get a BEAMNOVA mini table miter saw and save 10 times the time compared to cutting only by hand!
• USER-FRIENDLY DESIGN - The protractor at the bottom allows the material to be cut from 0-45 degrees. Half of the blade is covered in the protective housing to protect the operator from accidentally hurting the hand. The red limit switch on the top can prevent you from misoperation. The base clamping jig can fix the machine on the desktop firmly.

Product features

Specifications:

Voltage: 100-120V

Output Power: 60W

Speed: 4000-10000r/min

Saw Blade Size: 50mm / 2 in

Blade Teeth: 100t

Size: 250 * 140 * 150mm / 10*5.5*6 in

POWERFUL MOTOR

Generates 4000-10000r/min and the 2-inch high-speed steel blade can cut through a variety of materials in a really short time.

It saves 10 times the time compared to cutting only by hand!

SMOOTH & PRECISE CUTTING

The attached angle gauge allows cutting from 0° to 45°. It makes precise cuts up to 1/2" deep.

It can make a cutting so smoothly and accurately that you may never have to file or sand the cutting end any more!

ON-OFF SWITCH

Half of the blade is covered in the protective housing to protect the operator from accidentally hurting the hand.

The red limit switch on the top can prevent you from misoperation.

COMPLETE ACCESSORIES

The base clamping jig can fix the machine on the desktop firmly.

Comes with 1 metal blade, 1 resin blade, 1 wrench, 1 clamping jig and 1 user manual.

Product description

The 12 in. Dual-bevel Glide Miter saw features the smooth cutting motion, accurate performance and space-saving design of Bosch Patented axial-glide system.

• Axial glide system: The patented glide system allows wider cross cuts and better alignment while also being compact; This saves you 12 inch of valuable work space; Bosch glide miter saw also offers unmatched smoothness of cut
• Capacity: Expanded cutting capacity 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring
• Adjustable: The GCM12SD miter saw provides easy adjustments with a large easy to read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts; Category best 90 percentage dust collection optimized for cutting 2x material with a vacuum
• Precision: Square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support
• Ease of use: Upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw

User questions & answers

Question:	is ther laser on this saw
Answer:	The UK version (Bosch GCM 12 GDL Professional) ships with an included non battery powered laser that produces two lines that bracket the saw kerf. Not sure why Bosch made the laser layout tool an extra for USA version. There are other differences between these models and the UK 240V version has more options as stardard equipment.
Question:	dose this saw have a depth stop on it so you can create a dado
Answer:	Yes, it has a depth stop. The saw cuts very nice and it glides effortlessly, u must adjust the drag on it. When cutting dadoes, it does not hang up like rail type saws when the fine dust finds its way into the rail bearings like the Dewalt I used to use. It was an expensive investment in a saw, but i really like it so much more then any of my previous sliding compound saws.
Question:	Where is this saw made? Asia/US/EU
Answer:	Best miter saw you can buy. Doesn't matter where it was made
Question:	Why buy this miter saw versus the Bosch
Answer:	SGT .several reasons i chose this saw over the 5312. first off I run a high end custom cabinet shop and this saw sees very heavy uses. The sliding rails on the type of the Bosh 5312 always get dust in the bearings and with time the sliding action sticks and must be taken apart, the bearings cleaned and re-lubed with dry silicone lubricant. That is what my experience was with my last 3 sliding saws, (Dewalt, Ryobe and Dewalt pro). the other thing i love about the Bosch GCM12SD its there are no rails sticking out the back of the saw, and the clearance from the wall where my saw sits is no longer needed. It was a great investment even though its on the pricy side. i love the accuracy and the performance, I change to a better cutting blade and the performance got better. I switch from the stock blade and now run a Forrest CM12806115 Chopmaster 12 inch 80 tooth blade cleaner cuts and very smother with no tear outs. i hope this helps you

Product features

Bosch 12-Inch Dual-Bevel Glide Miter Saw (GCM12SD)

The Bosch GCM12SD is a 12-Inch Dual-Bevel Glide Miter Saw that features a smooth cutting motion, accurate performance and a space-saving design of the Bosch-exclusive Axial-Glide System. Pre-aligned Squarelock fences help the saw maintain precision throughout its life; a soft-grip ambidextrous handle along with a combination dust chute and vacuum adaptor add to user comfort. The saw also offers a large cutting capacity, easy-to-read bevel and miter scales with detents at common angles, and easy-access upfront controls.

Compact cutting

Featuring a Bosch-exclusive Axial-Glide system for durable precision, complete control, and compact workspaces.

Precise control

High-precision Squarelock quick-release fence aligns fence 90 degrees to saw’s table and requires no adjustment; one-touch lock/unlock to slide fence for added support.

Versatile saw

With a 14-Inch expanded horizontal cutting capacity, 6-1/2-inch vertical capacity, and a 6-1/2-inch crown capacity (45-degree spring), this miter saw is perfect for any variety of cuts.

Adjustable

The saw provides easy adjustments with a large easy-to-read uniform bevel and stainless steel miter scales with marked detents and roof pitch angles.

Product description

Specifications:

Cuts Steel, Brass, Wood & More With Smooth, Precise Cuts; No Sanding Needed!

Power: 110V AC, 60 Hz, 80 Watts, 9 Amp

Weight: 2kg

Speed: 7800r/min

3/8" Arbor

50mm blade diameter and 0.5mm blade thickness

1/2" Cutting Depth

0-45 Degree Miter

71" Power Cord



Features:

Cuts wood, brass & similar light materials with smooth, precise cuts; no sanding needed!

Cuts to a depth of 1/2 in. - ideal for frames and molding

Make miter cuts from 0° to 45°

Fast 7800 rpm and a 3/8-Inch arbor

50mm blade diameter and 0.5mm blade thickness

This Mini Benchtop Cutoff Miter Saw is a mini benchtop mounted cut-off saw with high-speed steel blade for cutting metal, wood, plastic and other light materials. Has adjustable miter gauge, perfect for all your DIY projects! This precision bench saw makes perfect cuts in soft metals, wood and plastic in 1/10th the time it takes by hand. This bench-top saw is so accurate that you might never have to file or sand ends! Compact size and portable; easy to use for cutting metal, aluminum, copper, plastic and wood!



Package Included:

- 1 x Mini Bench Cut-off Saw Set

- Instructions & Parts Book

• 【Smooth & Precise Cut】Cuts wood, brass & similar light materials with smooth, precise cuts; no sanding needed!Cuts to a depth of 1/2 in. - ideal for frames and molding.
• 【Miter Cut】Make miter cuts from 0° to 45°. Fast 7800 rpm and a 3/8-Inch arbor. 50mm blade diameter and 0.5mm blade thickness.
• 【High-Speed Steel Blade】This Mini Benchtop Cutoff Miter Saw is a mini benchtop mounted cut-off saw with high-speed steel blade for cutting metal, wood, plastic and other light materials.
• 【Precision Bench】Has adjustable miter gauge, perfect for all your DIY projects! This precision bench saw makes perfect cuts in soft metals, wood and plastic in 1/10th the time it takes by hand.
• 【Portable & Easy to Use 】This bench-top saw is so accurate that you might never have to file or sand ends! Compact size and portable; easy to use for cutting metal, aluminum, copper, plastic and wood!

User questions & answers

Question:	Would this be good for cutting trim
Answer:	Already together and ready to go; my husband loves it!
Question:	Can it cut 4 in baseboard
Answer:	The chainsaw would use unleaded gasoline and two-stroke oil mixed at a ratio of 25:1.

Product description

Remember when you had a smooth cut with no tearout? The WEN 10-Inch Professional Woodworking Saw Blade provides reliable and accurate performance, maintaining its straight shape and sharp edges for longer than the competition. The machine-cut carbide-tipped teeth slice through woods of any kind, making easy work out of pine, oak, poplar, cherry, maple, walnut, and more. The 5/8-inch arbor allows for compatibility with the majority of 10-inch miter saws, jobsite saws, and table saws on the market. This lightweight, ultra-thin blade provides maximum efficiency during operation, leaving behind a kerf a mere 1/10 of an inch wide (2.4 mm). It’s time to get reliable and powerful performance with a WEN Saw Blade. Remember when you had a blade that lasted? Remember WEN.

• Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM
• Perfect for slicing through both hard and softwoods of all kinds
• Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts
• Designed with 80 carbide-tipped teeth for ultra-fine finish wood cutting
• Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws

• 🔥Ideal gift for your family & professional work.Usually ships within 5 days.
• ➤DOUBLE BEVEL CUTTING & RED LASER GUIDE - Double bevel cutting design allows you to adjust the head to left 45°and right 45°to meet different cutting wood, plastic tubing and soft metal. Integrated laser controlled by single switch, marking the cutting line, helping sawing long work pieces.
• ➤3800 POWER MOTOR & EFFICIENT FOR OPERATION - With 15 AMP MOTOR and full-size performance at 3800 RPM, TACKLIFE sliding compound miter saw provides powerful, smoother, faster cutting. The equipment of soft-grip cutting handle and base angle change handle for added comfort. SLIDING DESIGN can extend cutting flexibility and add cutting width.
• ➤EFFICIENT DUST COLLECTION SYSTEM - Efficient dust bag can collect more than 70% of the dust produced. The 35 mm dust port allows you to connect a vacuum cleaner to achieve the ideal 100% dust collection, keeping the environment clean.
• ➤40 T BLADE & EXTENSIBLE TABLE - The 305mm 40-tooth TCT strong blade is ideal for cutting wood, plastic tubing and soft metal.Equipped with allen wrench, the blade can be easily changed.The wide worktable provides better material support during operation, and the pair clamping system ensures the safety of the workpiece, allowing for more secure cutting operations.

Product features

TACKLIFE 12-inch Double-Bevel Sliding Compound Miter Saw - PMS03A

• Powerful Motor: Powerful 15 Amp/1700 W saw delivers full-size performance at 3500 rpm, making cutting faster, smoother.
• Double Sliding Design: Sliding design for extended cutting flexibility and added cutting width.
• Double Bevel Cutting: You can adjust the cutting angle from left 45° to right 45° to meet different cutting needs.
• Clamping Device: The clamping device system ensures the stability and ensures the safety of operation.
• Comfortable Handle: Soft-grip cutting handle and base angle change handle to increase users' comfort.
• 3 Metes Cable: 3 meters long cable for your cutting work to provide more convenience.

Double-Bevel Cutting

You can adjust the angle from -45°-0°-45° to meet different needs, In detail: 0° : 4.13 x 12.99 inch, 45°(L) : 2.36 x 12.99inch, 45°(R) : 1.38 x 12.99 inch.

Precise Miter Angle

Adjustable miter scale with positive stops (-45°/-22.5°/0°/+22.5°/+45°) allow users to quickly adjust the saw to do square cuts, bevel cuts and compound cuts.

Maximum Cutting Performance

90°x90°: 105x335 mm

90°x45°(L): 60x335 mm

90°x45°(R): 35 mmx335 mm

45°x90°: 105x235 mm

45°x45°(L): 60x235 mm

45°x45°(R): 35x235 mm

Large Extended Worktable

2 Extension rods for a larger working table to meet your requirement of large pieces cuts. Vice clamping system helps to fix the objects and free your hands.

Precise Laser Guide

Built-in laser controlled with single switch, it works once the machine is power on, making straight cuts more professional and easier.

90% DUST COLLECTION

Included dust bag helps to collect over 90% dust to maintain a tidy working space. 30mm dust port also can connect with household vacuum cleaner.

Product description

Shop Master 10 in. Miter saw with a battery operated laser that makes aligning the blade to the work piece more convenient and precise. It features a Spindle Lock that holds the blade in place during changes. The shop Master 10 in. Miter saw is perfect for the Dyer in the family or for everyday use. It features a powerful 15 amp motor that cuts through wood like butter and spins the 10 in. Blade at 5500 RPM. It has denoted stops at 0, 15, 22.5, 30, and 45 degrees. The battery powered laser ensures an accurate cut every time. It is UL listed and comes with a 3 year warranty. The saw can make Left bevel cuts from 0 to 47 degrees. It works virtually with all Miter saw stands.

• Lightweight unit is easy to move from room to room or even from job to job
• Works with virtually all miter saw stands
• Spindle lock holds spindle securely while bade nut is loosened and removed
• Capacity – cuts Nominal 4x4 and 2x6 at 90° and 2x6 with one pass
• Bevels left - from 0°- 47°, cuts Nominal 2x6 at full bevel

User questions & answers

Question:	Does the miter saw have clamp hold down for cuts
Answer:	I bought a new one today from a lumberyard and it is a Type 1. (says right on the sticker on the motor) Not sure if that means the slide mechanism is better or worse than the Type 20. I would assume it was made in 2014 because there is a "Dewalt use only" tag on the box which starts with 2014. Not sure if a "fresher" saw is a Type 20
Question:	Does this come with a dust bag
Answer:	mmToolparts actually sells a kit (3 proprietary DeWalt parts + their wiring harness) for less than $70. They have videos on their website that show how to install the parts on DW716, DWS779, and DWS782 saws. You will need some additional tools (torx screw drivers or torx bits, wire strippers/cutter/crimper) and somewhat mechanically inclined. Just google "DWS779 xps light kit" and they should be the top result. This might be an easier option versus going to a DeWalt service center in the post pandemic world.
Question:	Does this saw have auto braking
Answer:	It does not come with any laser for guidance. You may find my answer a bit crude, I've been using miter saws for many years and the best guiding system I found to work is my/your eyes. Having lasers or no lasers you still need to use your eyes to get the work piece spot on near the cutoff point. Hope this helps!
Question:	Does it cut an accurate 45*? Will the blade lock in place at 45*? I build picture frames and if the cuts r off at all the corners won't align right
Answer:	You can add the LED light to this saw. Not a laser but a shadow light that show exactly where the saw blade will cut. I just did it last night. Parts can be had for about $70. This basically turns it into a model 780 which is much more expensive. Pretty simple to add.

Product features

Laser

Battery Operated with on/off switch. Makes aligning blade to work piece more convenient and precise.

Dependable and Versatile

Works with virtually all miter saw stands. Lightweight unit is easy to move from room to room or even from job to job with ease.

Powerful

The powerful new 15 amp motor cuts nominal 4"X 4"and 2"X 6" at 90° and 2"X 6" with one pass while the electric brake will stop the saw blade within seconds of releasing the trigger.

Shopmaster 10" Miter Saw w/ Laser

The Shopmaster S26-260L is the perfect addition to your home workshop. This 10 inch miter is packed full of features as well as the power to handle the demands of a handyman all at a price that you will love! Discover why people can't keep from talking about the Shopmaster 10" Miter Saw w/ Laser.