12 best bosch table saw

Product description

The Bosch 4100XC-10 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand delivers both professional rip capacity and outstanding portability for a tool that can get the job done, wherever it is. The powerful 15-Amp saw delivers 4. 0 max HP for outstanding productivity. It also incorporates soft-start circuitry for smooth but quick ramp-up to the operating speed. It includes Constant Response circuitry to help maintain speed under load, restart protection to avoid accidental startup and overload protection. The SquareLock rip fence is engineered for maximum trueness and great ease-of-use. It includes an enhanced auxiliary fence for narrow workpieces. The lighter GTA47W Gravity-Rise Wheeled Stand has 8 In. treaded rubber-composite tires and a single-action design for easy set-up and transport. It is jobsite-ready with heavy-duty construction. The Smart Guard System features a three-position adjustable riving knife, anti-kickback pawls and non-obstructed-view barrier guard assembly. The table saw provides a 30 In. x 22-1/2 In. tabletop with a 30 In. rip capacity for ripping 4 Ft. wide sheets goods in half.

• Powerful table saw – has 15-Amp saw with 4. 0 max HP and 3, 650 rpm, for rip-cutting and cross-cutting of fine and rough materials
• Dimensions: 32.5" D x 27" L x 13" H | Product Weight: 94 lb
• Saves space: Large cast aluminum top provides increased work space and material support with a 25 inch. Ripping capacity to cover all typical job site rip cutting widths
• Portability: Works seamlessly with the included lighter GTA47W gravity rise wheeled stand for easy job site mobility, with single action setup and take down
• Protection: Smart guard system contains riving knife and Anti Kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut
• Soft start circuitry: Manages the intensity of motor start up and minimizes the possibility of tripping a circuit breaker

User questions & answers

Question:	will this connect to the festool 27mm dust collector
Answer:	Don't know that item, but the exhaust/dust port on the Bosch mikes out @ 2.50" OD and 2.25" ID; so, w 27 mm close to 1.06"...likely not And FYI, bought the official Bosch dust collection bag which does a poor job...I use my VacMaster hose- the outer nozzle plugs snugly into the Bosch port's ID and picks up 80-90 % of the wood dust generated...as long as I remember to turn the vacuum on..which I sometimes don't ...love this table saw
Question:	Can a dado blade be used in this saw
Answer:	Yes, the 4100XC-10 table saw can dado cut by using TS1007 dado insert. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	is this saw equipped with the Reaxx system
Answer:	No
Question:	how tall is this saw/stand when folded / stored
Answer:	The table height from floor is 32.5". Its dimension is 27in x 32.5in x 13in. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

BOSCH 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand 4100XC-10

The Bosch 4100XC-10 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand delivers both professional rip capacity and outstanding portability for a tool that can get the job done, wherever it is. The powerful 15-Amp saw delivers 4.0 max HP for outstanding productivity. It also incorporates soft-start circuitry for smooth but quick ramp-up to the operating speed. It includes Constant Response circuitry to help maintain speed under load, restart protection to avoid accidental startup and overload protection. The SquareLock rip fence is engineered for maximum trueness and great ease-of-use. It includes an enhanced auxiliary fence for narrow workpieces. The lighter GTA47W Gravity-Rise Wheeled Stand has 8 In. treaded rubber-composite tires and a single-action design for easy set-up and transport. It is jobsite-ready with heavy-duty construction. The table saw provides a 30 In. x 22-1/2 In. tabletop with a 30 In. rip capacity for ripping 4 Ft. wide sheets goods in half.

Features

• Powerful table saw – has 15-Amp saw with 4.0 max HP and 3,650 rpm, for rip-cutting and cross-cutting of fine and rough materials
• Large cast aluminum top – provides increased work space and material support with a 30 In. ripping capacity
• Soft-start circuitry – manages intensity of motor start-up and minimizes the likelihood possibility of tripping a circuit breaker
• Constant Response circuitry – helps maintain speed under load
• Restart protection – helps to avoid accidental startup
• Portability – works seamlessly with the included lighter GTA47W Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down
• SquareLock rip fence – engineered for enhanced clamping and trueness
• Smart Guard System – riving knife and anti-kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut
• Onboard storage – allows for access to all included components

Product description

The Bosch 4100 10 10 In. Work site Table Saw with Gravity Rise Wheeled Stand delivers both professional rip capacity and outstanding portability for a tool that can get the job done, wherever it is. The powerful 15 Amp saw delivers 4. 0 max HP for outstanding productivity. It also incorporates soft start circuitry for smooth but quick ramp up to the operating Speed to manage the intensity of motor start up and minimize the possibility of tripping a circuit breaker. It includes constant response circuitry to help maintain Speed under load, and overload protection. The square lock rip fence is engineered for maximum trueness and great ease of use, with the fence able to easily glide along the rail for one handed operation. The lighter GTA47W gravity rise wheeled stand has 8 In. treaded rubber composite tires and a single action design for easy set up and transport. It is job site ready with heavy duty construction. The smart guard system is the first modular table saw blade guard, featuring a three position adjustable riving knife, anti kickback pawls and non obstructed view barrier guard assembly. The table saw provides a 29 In. x 21 1/2 In. square tabletop with a 25 In. rip capacity for ripping 4 Ft. wide sheets goods in half. SquareLock rip fence – engineered for enhanced clamping and trueness.

Dimensions: Table saw & stand combination in working position = 30.25" Depth (front to back) x 47" Width (when extension is at in-most position) x 35.5" Height. Table-top dimensions = 21-1/2" Depth (front to back) x 29" Width (when extension is at in-most position). Weight: 58.0lb,Weight of Bare Saw - Lb: 63.0,Weight of Saw, Standard Equipment and Stand - Lb: 92.0,Width: 32.0. Works With: Vacuum Hoses-Common 2-1/2" Vacuum Hoses,Vacuum Hose Adapter for 35 mm Vacuum Cleaner Hoses-VAC004,Dust Bag-TS1004,Zero-Clearance Insert-TS1005,Dado Insert-TS1007,Molding Insert-TS1009,Outfeed Support-TS1016,Left-Side Support-TS1008.

• Powerful table saw – has 15-Amp saw with 4. 0 max HP and 3, 650 rpm, for rip-cutting and cross-cutting of fine and rough materials
• Dimensions: 37.7" D x 29.4" W x 19.4" H | Product Weight: 110 lb
• Large cast aluminum top – provides increased work space and material support with a 30 In. ripping capacity
• Soft-start circuitry – manages intensity of motor start-up and minimizes the likelihood possibility of tripping a circuit breaker
• Constant Response circuitry – helps maintain speed under load
• Restart protection – helps to avoid accidental startup
• Portability – works seamlessly with the included lighter GTA47W Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down
• Smart Guard System – riving knife and anti-kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut

User questions & answers

Question:	Bosch 4100-10 lists two weights 60 lbs and 124.2 lbs...Why is there a difference
Answer:	The table saw itself weights about 60lbs, if you include the stand with the wheels added to the saw it weights more. I believe the d/c 4100-9 weights 124.2 with all the accessories. The 4100-10 is listed as weighting about 110lbs shipped, so 110lbs is the weight with everything attached. Does that help make more sense?
Question:	is there a schematic available for this table saw
Answer:	I don't know how detailed you want to get, but by downloading the owner's manual you get the parts breakdown schematic
Question:	I want to be able to cut a 4 by 4. can i replace the blade with od greater than
Answer:	NO you cannot. A greater diameter blade say 12" would bottom out on the framing below and would reduce the life of the motor as well.
Question:	Max blade height above table
Answer:	Hi! The maximum depth of a cut at 90 degrees for a blade on the 4100-10 Table Saw is 3-1/8". For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

Portability

Works seamlessly with the included Gravity-Rise Wheeled Stand.

Soft-Start Circuitry

Manages the intensity of motor start-up and minimizes the possibility of tripping a circuit breaker

SquareLock Rip Fence

Engineered for enhanced clamping and trueness

Smart Guard System

Riving knife and anti-kickback pawls provide protection.

Product description

The 12 in. Dual-bevel Glide Miter saw features the smooth cutting motion, accurate performance and space-saving design of Bosch Patented axial-glide system.

• Axial glide system: The patented glide system allows wider cross cuts and better alignment while also being compact; This saves you 12 inch of valuable work space; Bosch glide miter saw also offers unmatched smoothness of cut
• Capacity: Expanded cutting capacity 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring
• Adjustable: The GCM12SD miter saw provides easy adjustments with a large easy to read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts; Category best 90 percentage dust collection optimized for cutting 2x material with a vacuum
• Precision: Square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support
• Ease of use: Upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw

User questions & answers

Question:	is ther laser on this saw
Answer:	The UK version (Bosch GCM 12 GDL Professional) ships with an included non battery powered laser that produces two lines that bracket the saw kerf. Not sure why Bosch made the laser layout tool an extra for USA version. There are other differences between these models and the UK 240V version has more options as stardard equipment.
Question:	dose this saw have a depth stop on it so you can create a dado
Answer:	Yes, it has a depth stop. The saw cuts very nice and it glides effortlessly, u must adjust the drag on it. When cutting dadoes, it does not hang up like rail type saws when the fine dust finds its way into the rail bearings like the Dewalt I used to use. It was an expensive investment in a saw, but i really like it so much more then any of my previous sliding compound saws.
Question:	Where is this saw made? Asia/US/EU
Answer:	Best miter saw you can buy. Doesn't matter where it was made
Question:	Why buy this miter saw versus the Bosch
Answer:	SGT .several reasons i chose this saw over the 5312. first off I run a high end custom cabinet shop and this saw sees very heavy uses. The sliding rails on the type of the Bosh 5312 always get dust in the bearings and with time the sliding action sticks and must be taken apart, the bearings cleaned and re-lubed with dry silicone lubricant. That is what my experience was with my last 3 sliding saws, (Dewalt, Ryobe and Dewalt pro). the other thing i love about the Bosch GCM12SD its there are no rails sticking out the back of the saw, and the clearance from the wall where my saw sits is no longer needed. It was a great investment even though its on the pricy side. i love the accuracy and the performance, I change to a better cutting blade and the performance got better. I switch from the stock blade and now run a Forrest CM12806115 Chopmaster 12 inch 80 tooth blade cleaner cuts and very smother with no tear outs. i hope this helps you

Product features

Bosch 12-Inch Dual-Bevel Glide Miter Saw (GCM12SD)

The Bosch GCM12SD is a 12-Inch Dual-Bevel Glide Miter Saw that features a smooth cutting motion, accurate performance and a space-saving design of the Bosch-exclusive Axial-Glide System. Pre-aligned Squarelock fences help the saw maintain precision throughout its life; a soft-grip ambidextrous handle along with a combination dust chute and vacuum adaptor add to user comfort. The saw also offers a large cutting capacity, easy-to-read bevel and miter scales with detents at common angles, and easy-access upfront controls.

Compact cutting

Featuring a Bosch-exclusive Axial-Glide system for durable precision, complete control, and compact workspaces.

Precise control

High-precision Squarelock quick-release fence aligns fence 90 degrees to saw’s table and requires no adjustment; one-touch lock/unlock to slide fence for added support.

Versatile saw

With a 14-Inch expanded horizontal cutting capacity, 6-1/2-inch vertical capacity, and a 6-1/2-inch crown capacity (45-degree spring), this miter saw is perfect for any variety of cuts.

Adjustable

The saw provides easy adjustments with a large easy-to-read uniform bevel and stainless steel miter scales with marked detents and roof pitch angles.

Product description

• Your purchase includes one Dewalt table saw, 10" 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches, blade guard assembly manual
• Other Specs: Max rip to left of blade – 22” | Max rip to right of blade – 32-1/2” | Max width of Dado – 13/16” | Arbor size – 5/8” | Amps – 15 | Depth of cut at 45° – 2-1/4” | Depth of cut at 90° – 3-1/8” | No Load Speed: 4800 RPM
• Rolling stand designed for easy set up and breakdown with excellent stability
• Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate
• Features a 15.0A high torque motor with the power to cut pressure treated lumber and hardwoods

User questions & answers

Question:	Can i mount the axtra 8-outlet power strip on the table saw
Answer:	Can't see why not. Look online for Garmin-compatible charts, whether from Garmin or not. (My hiking map, with contours and more trails than the USGS maps, was a free download! Look around.) The eTrex models are waterproof, which is a plus. Think seriously about the display size, though. The whole unit fits in the palm of your hand, and its display is only a couple inches high. (See the specs. I might be off a little.) We hikers and hunters can stop and consult the unit, then start walking again. Your boat might travel quite a distance while you peer at that tiny screen, even with the engine stopped. Just a thought.Garmin obviously had boaters in mind when they programmed this, regardless of its size. It even has a "Man Overboard" function that instantly records its current location, then displays the distance and direction back to there while you turn the boat around. It shows tides, too, at whatever tide stations are close to you. Bottom line: it will do everything you need (I think) and do it all day and on into the next morning on a pair of AA cells, but your eyes will ask you why you didn't buy something with a bigger screen.
Question:	What are the dimensions of the unit on the stand when closed up. WxHxD? Need to know if it will fit in the storage cubby I have in the garage
Answer:	The maps that come preloaded are: Worldwide DEM Basemap (NR), Digital Globe demo (Jnx) and USGS Quads - Grand Canyon National Park (Jnx). Unfortunately, you will have to get the topo maps separately.
Question:	Does this saw accept dado blade set
Answer:	yes on the compass (electronic) but turn on the WAAS depending on if you set the compass for a true north or magnetic north WAAS gets rid of the errors jumping from satellite to satellite
Question:	How good would this saw be for a beginning woodworker on a limited budget
Answer:	The Oregon and all the Garmin "state" models all have a touch screen, don't they? The eTrex series doesn't. For controls it has the Power/battery check button and "back button on the right, and on the left, the zoom-in and -out buttons, plus the Menu button. On the front, at top-right, is the main control, a little thumbstick. Use it for scrolling and selecting menu items and for moving the map beyond your location.You'll want to spend some time reading the manual; this thing has a LOT of functionality. Most important shortcut: no matter how deep you go in the menus, double-tapping the Menu button takes you back to the main screen, with Map highlighted.

Product features

10" Jobsite Table Saw 32 - 1/2" (82.5cm) Rip Capacity, and a Rolling Stand

The DWE7491RS 10" Jobsite Table Saw 32 - 1/2" Rip Capacity, and a Rolling Stand has a 15 Amp motor and 32-1/2" rip capacity to allow cutting of large and hardwood materials. Features tool-free guarding component adjustments and fast, accurate fence adjustments. Rolling stand designed for easy set up and breakdown with excellent stability.

• Material support, can be used for narrow rip cuts
• Onboard storage system provides easy access to the Blade Guard Assembly, fence, riving knife, miter gauge, wrenches, push stick, and cord wrap when not in use
• Telescoping fence rails retract to create a small, portable package
• 15 amp Motor quickly rips through hardwoods with ease

Features

• Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate
• 32-1/2" rip capacity easily cuts a variety of larger shelving and trim materials
• Rolling stand designed for easy set up and breakdown with excellent stability
• Flip over ripping fence allows for narrow rip cuts
• 2-1/2" Dust Collection Port easily connects to a vacuum for efficient dust extraction
• 21-7/8" X 26 - 3/8" table provides superior material support

Product description

The 8-1/4 inch Portable Worm Drive Table Saw delivers our legendary Worm Drive power in a light, portable design. Created for jobsite productivity, this compact powerhouse features a 2-5/8 inch depth of cut and 25 inch rip capacity to tear through sheet goods and slice up to 3x. Durable, all-metal construction stands up to jobsite abuse. The rack and pinion system makes fast, smooth fence adjustments for precise cuts. Our patented Dual-Field Motor stays cooler, so it can work harder, longer. Now you don’t have to sacrifice power and torque to get a table saw that’s easy to transport.

• Legendary worm drive gearing offers maximum torque for ripping applications
• Precision rack and pinion system makes fence adjustments quickly and smoothly for accurate cuts
• Light weight and compact footprint make it easy to move around the jobsite
• Tear through sheet goods and slice up to 3x with the 2-5/8 inch depth of cut and 25 inch rip capacity
• All-metal construction delivers legendary durability

User questions & answers

Question:	Can you use a dado set on this saw
Answer:	With the foot activator mounted on the inside the foot print measures 27" x 21.5". With the activator on the outside the measurements are 33.5" x 21.5". These were measured at the floor level. The fiber board table top is 23" x 20". I hope this helps.
Question:	Is it able to rip a 2x4 at a
Answer:	1 speed
Question:	will this fit a skilsaw 3310? the design looks similar
Answer:	I think it north or south carolina
Question:	has this been shipping with just a skilsaw blade and not a diablo blade ? thank you all
Answer:	one

Product features

Stellar Power and Performance

With the SKILSAW SPT99T-01 8-1/4" Portable Worm Drive Table Saw, you will be able to perform the toughest of applications with ease. No matter what type of cut you want, this handheld circular saw allows you to work seamlessly on various materials. Compact, lightweight and convenient to carry around, this saw by SKILSAW is reliable and has the largest capacity that delivers relentless power for toughest of applications.

Excellent Maneuverability

As this circular saw comes with a precision rack and pinion system to make fence adjustments quickly and smoothly, you can be ensured of accurate cuts every time. The all metal construction for durability and reduced weight allows you to place this saw on any flat surface for woodwork.

Tough Applications Made Easy

Smooth and precise, the SKILSAW SPT99T-01 8-1/4" Portable Worm Drive Table Saw is an investment that will not let you down. With stunning features, you will be able to get the cuts you desire for woodwork and other fabrication while being safe from mishaps.

Product description

The Bosch GKT13-225 Track Saw with Plunge Action delivers precision and power, ideal for making table-saw quality cuts to wood and wood-based sheet goods such as laminated particle boards and plywood. The track-guidance system provides exact adjustments for precision end-to-end cuts and plunge cuts. The saw and track combination makes it a more easily transportable alternative to a table saw. The precision of the track saw and blade combine with the optional Bosch tracks (sold separately) to deliver a straight fast finish cuts. The saw is engineered to fit precisely to the tracks. The saw includes constant electronics to help maintain speed under load. The saw also features a spindle lock, a swiveling hose port and a lock-off mechanism. It features overload protection. It has a single pivot point for both bevel and non-bevel cuts, from -1° (for slight undercuts) to +47° cuts. It allows for efficient dust extraction when connected to a suitable vacuum cleaner. The GKT13-225L Kit includes a 48-tooth 6-1/2 In. track saw blade, blade-change wrench, and an L-Box case. Bosch offers a full range of optional attachments, including four different track lengths, connector for connecting multiple tracks, an angle guide and a rip fence.

• Track saw with plunge action – provides fast, easy setup for one-step clean finish cuts in wood and wood-based sheet goods such as laminated particle boards and plywood
• Plunge mechanism – allows for precise plunge cuts with accurate depth of cut
• Single bevel pivot point – when sawing using a track (sold separately), the track can be positioned in the same way for bevel cuts or non-bevel cuts
• Constant electronics – helps maintain speed under the load of more-demanding applications
• Overload protection – protect the motor from overheating
• Efficient dust extraction – when connected to suitable vacuum cleaner, supports easier working conditions
• Swiveling hose port – keeps optional vacuum cleaner hose out of the way

User questions & answers

Question:	Does anyone know how to align this saw at the 90 degree cut position? What set screws should be adjusted
Answer:	I had the same problem with mine. I didn't see any way to adjust it. I returned it and bought the Festool TS75. I've been happy with that.
Question:	What is the motor amperage
Answer:	Hi! The GKT13-225L has a motor amperage of 13.0. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Does it have a splinter guard like the festool
Answer:	Yes
Question:	Does it come with the tracks
Answer:	Hi! The GKT13-225L does not come with a track. The compatible tracks for this model are FSN800, FSN1100, FSN1600 and FSN2100. You can check for these items from this link https://www.boschtools.com/us/en/boschtools-ocs/track-plunge-saw-attachments-36319-c/. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

Efficient and Easy Operation

The Bosch Tools Track Saw - GKT13-225L 6-1/2 In. Precision Saw works for the most demanding applications in wood, masonry and metal. The super-efficient and powerful plunge action provides a fast and easy setup for one-step clean finish cuts in wood and wood-based sheet goods such as laminated particle boards and plywood.

Heavy Duty

Along with various functions of this tool, it includes a plunge mechanism that allows for precise plunge cuts with accurate depth of cut fuel gauge. It also comes with an overload protection that helps protect the motor from overheating.

Packed with Features

The Bosch Tools Track Saw - GKT13-225L 6-1/2 In. Precision Saw with Plunge Action & Carrying Case also includes an efficient dust extraction and swiveling hose port that helps keep the work area clean when you are working on wood and other materials. Ideal for cutting, trimming, carving and other applications, this hand tool by Bosch is ideal completing projects around the house.

Product description

The innovation responsible for both the unique appearance and the unparalleled level of performance is Bosch's patented Axial-Glide system. Beyond giving the CM10GD its distinctive profile, Bosch's Axial-Glide system eliminates three key challenges miter saw users have endured since the first slide systems debuted many years ago. While the traditional sliding compound miter saw approach enables users to make wider cross cuts, that system takes up more space and is prone to misalignment and stickiness over time. By replacing the sliding rail system with a hinged or articulating glide arm system - similar to the linkage used in a four-bar suspension design - Bosch created a more compact miter saw that delivers durable precision, remaining true and smooth over time. The Bosch CM10GD 10-Inch Dual Bevel Glide Miter Saw features a powerful 15-Amp, 4, 000-RPM motor with large easy-to-read bevel and miter scales allowing for precise, quick and easy adjustments: 52-Degree Left/60-Degree Right Miter Capacity; 47-Degree Left/47-Degree Right Bevel Capacity with marked detents and roof pitch angles. The tall sliding 4-1/4-Inch fences allow for increased cutting capacity when cutting tall base and crown moulding. With an ergonomic soft-grip ambidextrous trigger handle and a clear lower guard for unobstructed visibility throughout cut, the CM10GD provides maximum comfort for all-day use.

• ACCURACY: The Bosch-exclusive Axial-Glide System allows wider cross cuts and better alignment
• CONVENIENCE: Featuring large, upfront metal bevel controls and Square lock precision fences for precise, quick and easy adjustments. Complete with dust collection chute and vacuum adapter for easy clean-up.
• CONTROL: This miter saw provides accuracy and cutting control at all angles. Crown/chop lock locks head in place for maximum chop cutting capacity for upright base moulding and nested crown.Depth Front-to-Back, Not Including Arm:30 inch
• COMPACT: Featuring a compact design that replaces the sliding rail system, taking up to 10 In. less workspace than a slide miter saw. This Bosch miter saw is perfect for tight quarters where other saws just won’t do.
• COMFORT: Large, form-fitting ergonomic ambidextrous trigger handle with soft grip provides maximum comfort for all-day use while the clear lower guard allows for unobstructed visibility throughout the cutting job.

User questions & answers

Question:	What are the dimensions for this saw
Answer:	Maximum crosscut up to 2-in x 8-in (nominal) at 90 degrees and 2-in x 6-in at 45
Question:	I have looked everywhere and can't find the saw's footprint size. How wide and deep in the saw base not counting the glide system
Answer:	No it is not
Question:	I have a flip top cart, the with is about 24 inch, can this saw fit on that
Answer:	yes
Question:	What is the maximum board thickness this saw can cut? This specification is listed nowhere for some reason
Answer:	yes

Product features

Bosch CM10GD 10-Inch Dual Bevel Glide Miter Saw

The Bosch CM10GD 10-inch Dual-Bevel Glide miter saw provides power and versatility. Thanks to the compact design and the innovative Axial-Glide System, this unit provides smooth cutting control in up to 10 inches less workspace than other miter saws, so users are able to work productively in hallways and other tight quarters. The saw delivers 4,800 no load rpm with outstanding cut capacity – 12-inch horizontal capacity (nominal), 5-1/2-inch vertical capacity against the fence (base), and a 6-inch crown capacity against the fence (45 degree spring).

Includes

10-Inch Dual Bevel Glide Miter Saw, 60-Tooth Blade, Material Clamp, Dust Bag

Axial-Glide System

The innovative Bosch Axial-Glide System gives the user durable precision in a compact workspace. Replacing the sliding rail system with a hinged or articulated glide arm system saves up to 10 inches of working room while giving the user enhanced alignment and a smooth glide for the life of the unit. As a result, users produce smooth cuts and have complete control over the saw's cutting motion.

Flexibility and Ease of Use

The all-metal bevel lock lever and range selector was designed to be upfront on this unit, to enable fast and easy bevel settings without reaching around behind the saw. The tall 4-1/4-inch sliding fences also support quick bevel set-ups, professional level precision and increased crown molding capacity.

Lock and Chop

For the utmost in chop cutting capacity for a 10-inch miter saw, the Bosch CM10GD has a crown/chop lock that locks the head in place. This enables users to power through upright base molding and nested crown molding. The adjustable miter detents with easy-read markings let you accurately set cuts up to 47 degrees left or right. The common angles have miter detents at 0, 15, 22.5, 31.6 and 45 degrees on the right and left, and 60 degrees on the right.

Dust in the Bag

Like other Bosch models, this saw includes a combination dust chute and vacuum adapter to hook up your 1-14-inch and 35mm hoses. The "click and clean" platform ensures that the vac hose remains in place, so users can concentrate on making the cut.

Product description

The Bosch CM8S 8-Inch Single Bevel Sliding Compound Miter Saw features a Bosch exclusive design delivering a well-balanced saw with a top carry handle at the center of gravity and weighing only 37 lbs., these features easily provide one-handed portability on and off the job. Accessible controls make it easy to change bevel settings without reaching behind the saw. The integrated expanding work piece supports, large easy to read miter and bevel scales and detent system provides quick and accurate cuts. Uniform marks from 52-degrees left to 60-degrees right with 10 adjustable miter detents set at most common cuts. The CM8S also has the same crosscut capacity (12-3/4-Inch) as a 10-Inch miter saw, at 30-percent the weight.

• CONVENIENT: The Bosch CM8S features a bevel lock lever and bevel turret stops located on the side of tool for quick and easy adjustments without reaching behind the saw. The saw also features easy-to-read miter and bevel scales.
• SUPPORTIVE: The miter saw provides an integrated expanding base extensions that expands up to 29-Inches left to right for additional work-piece support. Bevel Angle Range: -2° to 47°
• STABILITY: The Bosch CM8S miter saw features an adjustable front stabilizing foot, maintaining saw stability when performing slide cuts allowing maximum capacity.
• CONVENIENT: Features a miter detent override, an intuitive, easy to access thumb-actuated override as well as a clear lower guard for an unobstructed view of the saw in action. The detent system provides quick and accurate cuts.
• PORTABLE: The Bosch CM8S miter saw CM8S has the same crosscut capacity of 12-1/4 in. as a 10 inch miter saw but is 30% lighter. The Bosch exclusive design provides ultimate portability with a top carry handle and a weight of just 37 pounds

User questions & answers

Question:	Is it 8 or 8 1/2 " both sizes on description page
Answer:	England. My housemate is from Oxford & they are his favorite. I enjoy them, also.
Question:	What is the maximum depth of cut with the 8-1/2" blade - can it cut through a 4 x 4 (3-1/2") without having to turn the material
Answer:	Have only ordered currants.
Question:	can a metal cutting blade be used on this saw
Answer:	The 100g package is 2 strips of 5 biscuits each or 10 biscuits per 100g package. The case of 12 100g packages is the best deal due to shipping. Besides it is not that much really.
Question:	comparing this saw to other standard 10in sliding saws (dewalt, rigid), how does it compare for precision? (my existing harborfreight saw is terrible
Answer:	The Garibaldi Biscuits I recently received have an expiration date of July 2017, and I received them in September 2016. That's a long shelf life. Perhaps by the phrase "so stale", you may be referring to the crumbly nature of these biscuits. The biscuit part is a little thicker, and a little more crumbly than the old "Sunshine Raisin Biscuits" that were discontinued long ago. If by "stale" you mean crumbly, yes they are. I suggest eating them over a paper plate or over a sink - definitely NOT on the couch without a plate underneath.

Product features

Bosch CM8S 8-1/2 Inch Single Bevel Sliding Compound Miter Saw

The CM8S 8-1/2 In. single bevel sliding compound miter saw features a Bosch exclusive design delivering a well-balanced saw with a top carry handle at the center of gravity and weighs only 37 pounds.

These features easily provide one-handed portability on and off the job. Accessible controls make it easy to change bevel settings without reaching behind the saw.

The integrated expanding work piece supports, large easy to read miter and bevel scales, and detent system provides quick and accurate cuts.

Product description

The Bosch GCB10-5 deep-cut band saw is the lightweight, easy-to-handle tool that delivers nearly spark-free cuts through rebar, conduit and other metals. This saw features a robust 10 amp motor that offers clean, precise cuts – with less rework needed for burrs or tempering colors. This tool is powerful enough to handle professional-sized jobs on most materials. And it provides nearly spark-free cuts for safer Metal-Cutting operation. With variable-speed settings from 100 surface feet per minute and up to 380 surface feet per minute, the band saw allows the user can match the cut rate to the material for greater precision. This ergonomic, compact band saw weighs only 14.5 lbs., making it ideal for overhead cuts, and it has a saw hook to hang between cuts. It as a bright LED to illuminate the cut line.

• Robust 10 amp motor – provides clean cuts, with almost no rework needed for burrs or tempering colors
• Nearly spark-free operation – affords a safer jobsite
• Deep-cut capability – delivers cuts up to 4-3/4 in. In a single pass
• Compact, light design – weighs only 14.5 lbs., ideal for cutting tough overhead materials
• Variable-speed settings – offers versatility to match the cutting speed to the material and application

User questions & answers

Question:	Can it be used in France where the power supply is 220 V
Answer:	Thank you for the question. The GCB10-5 Band saw has a power voltage rating of 120V. You will need a power converter to step it up to 220V rating. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Does this saw have a ac/dc switch
Answer:	Hi! The GCB10-5 Deep-Cut Band Saw switch is AC only. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Where is this saw made
Answer:	I bought one of these a while back and it works great. The label says "Made in China"
Question:	Where can I purchase replacement tires for this bandsaw
Answer:	https://www.partswarehouse.com/Bosch-Band-Saw-GCB-10-5-3601M36010-s/327885.htm

Product features

Bosch GCB10-5 Deep-Cut Band Saw

The Bosch GCB10-5 Deep-Cut Band Saw is the easy-to-handle tool to deliver nearly spark-free, clean cuts through rebar, conduit and other metal. These precise cuts require less rework, and the 10-amp saw is powerful enough to handle professional-sized jobs on most materials. With a cut depth up to 4-3/4 In., this tool is ergonomically designed and only 14.5 Lbs., to provide great performance in a compact package. It provides a saw hook for storage and an LED light to illuminate the cut line.

Includes

GCB10-5 Deep-Cut Band Saw, 18 TPI 44-7/8 In. Band Saw Blade, Hanging Hook.

Convenient to Use

The Bosch GCB10-5 features a saw hook to hang the tool for easy storage at work. It provides a bright LED light, to illuminate the cut line for more accurate cuts. This is a tool that will deliver fast, clean and easy cuts in various metal materials, such as steel track, pipe or threaded rod.

Clean, Precise Cutting

The Bosch GCB10-5 has a 10-amp motor, which delivers precise cuts to a variety of materials – including rebar, conduit and copper pipe. The band saw saves time by making clean cuts, with almost no rework needed for burrs or tempering colors. It accommodates most common applications, with cuts up to 4-3/4 In. on a single pass.

Controlled Operation

This deep-cut band saw provides nearly spark-free cuts for safer metal-cutting operation. It features variable-speed settings, so the user can match the cut rate to the material for greater precision. The settings start at 100 surface feet per minute and go up to 380 surface feet per minute.

Lightweight, Compact Design

With a concise design and at only 14.5 Lbs., this band saw is ideal for cutting tough metal in difficult areas or for extended overhead applications. The main handle provides a comfortable grip for cutting in various positions. It also has an auxiliary side handle for more secure two-handed saw operation, as well as easier tool transport.

Product description

For over 100 years Delta has been meeting the needs of the most exacting Craftsmen. The Delta 36-6013 Portable 10 inch contractor table saw was designed with the professional in mind. Powered by a 15 amp motor it is maximized for precision, durability, and mobility. The heavy duty one piece rail system, along with the newly designed fence system allows for precision cuts every time. The fence incorporates a special design allowing you to cut narrow pieces of stock. The saw has a large 25 inch rip capacity 3-1/2 inch depth of cut at 90 degrees and 2-1/2 inch at 45 degrees. A 2. 5 inch dust collection port easily connects to a vacuum for efficient dust extraction to your work area clean. Cut after cut, this saw is designed for the demands of the professional user and serious craftsman and Delta backs that up with its 5-year pledge to you.

• Powerful 15 Amp Contractor Grade motor easily handles treated lumber and hardwoods
• 25 Inch Rip Capacity handles large stock and 13/16 in. X 8 in. STACKED DADO CAPACITY
• Heavy Duty Fence Construction with quick position tabs
• Professional Grade 5-Year

User questions & answers

Question:	dado blade compatible
Answer:	I would say yes but it’s an educated guess
Question:	Is there a base stand available for it
Answer:	I had to enlarge the opening a bit to install the new switch. The saw case is plastic and it's easy to modify the opening with a hacksaw - the kind with a small bayonet type handle for use in tight spaces. The plastic case is very easy to cut through. Got the switch installed and everything works just like it's supposed to.
Question:	Does this saw come with an extension
Answer:	Any time you are replacing a wired item, you should be removing one wire at a time from the old item and placing it on the new one. If you didn't think to do that, it's still not the end of the world. Looking at the switch from the backside, the black wires connect to the left side terminals and the white wires go to the right side. If you're still confused, here's a link to the wiring diagram: http://keyboard-keys.info/ryobi-table-saw-wiring-diagram
Question:	Is this belt drive or direct drive
Answer:	This switch has power for the main circuit and two side circuits. In the intended design they power the light and Lazer. If your tool is set up this way then it should work.

Product features

HUGE RIP CAPACITY

The Delta 36-6013 houses a powerful 15 amp motor and boosts an enormous 25 inch rip capacity. Its 559 square inch table surface and tube steel frame provides you the stability needs for those large cuts. This is an excellent saw for the Professional Flooring Contractor.

THE PRECISION YOU DEMAND

The Delta 36-6013 features a telescoping rails system make fence adjustments fast, smooth, and accurate. The rails utilize 3 quick adjustment tabs that allow you to quickly relocate the fence while ensuring the blade and fence are always parallel guaranteeing consistent and true cuts.

Product description

Operating at 15-Amps and weighing just 13.2 pounds, the CSW41 Worm Drive Construction Saw is a lightweight saw that doesn't compromise durability and power. This model features sturdy magnesium housing and a die-cast magnesium footplate for true strength and a lifetime of reliable use. Five ball bearings provide added stability, strength and life to the motor and worm drive gears. An advanced oil lubrication system also helps to ensure longer gear life. The lightweight design reduces user fatigue, while soft grip on the main handle delivers unmatched comfort and control in a wide variety of applications such as concrete form-building, bridge building, framing, sheathing and deck building. With large bevel capacity of up to 53 degrees and a positive stop at 45 degrees, easy-to-access metal depth and bevel adjustment levers allow users to make quick modifications for multiple cuts and advanced projects. An on-board multi-function wrench allows users to conveniently change blades, brushes and oil, adjust levers and remove the blade diamond knock out, while a built-in saw hook allows for convenient storage between cuts.

• LIGHTWEIGHT: The Bosch CSW41 Circular Saw provides better comfort and control. The tool’s magnesium construction delivers a lighter weight saw to reduce user fatigue and increase productivity
• ACCURACY: Featuring a worm drive design, the CSW41 offers increased accuracy and precision. The left side blade design provides unmatched clarity of cut line
• TORQUE: The saw delivers 5,300 no-load rpm but weights only 13.2 lbs. The powerful 15-amp motor provides torque for a variety of applications, matched with worm drive gearing
• CONVENIENT: The CSW41 features an on-board multi-function wrench for blade and brush changes, lever adjustments and blade diamond knockout. The saw also comes with a built-in tool hook for convenient storage between cuts
• COMFORT: With an anti snag lower guard, the circular saw provides smooth operation for small cut-off pieces. The soft grip handle provides comfort for all-day use

User questions & answers

Question:	How does this saw differ from the Bosch 1677M
Answer:	Yes
Question:	Can I use Skil lubricant on this Bosch saw? is the Bosch lubricant synthetic
Answer:	The 1659B is a 5-3/8" cordless saw that ONLY accepts the older style NiCd or NiMH "pod" batteries that have a stem sticking up out of the battery pack. The CCS180B is a 6-1/2" cordless saw that accepts current Li-Ion batteries, (such as Core or FatPack), that slide onto the tool and does not accept NiCd or NiMH battery packs. We have asked amazon numerous times to make that clear on the 1659B listing but they just ignore us so, we call each customer that buys a 1659B to make sure they understand this. The return rate is astounding because of their lack of proper description. Thank you.
Question:	is this saw made in usa
Answer:	18V
Question:	what is the difference between this and the skill
Answer:	It is not, you need the Bosch GKS18V-57G they at the same saw but the footplate on the 57G has the groove compatible with the FSN guide rail

Product features

Bosch CSW41 7-1/4 In. Bosch Worm-Drive Circular Saw

The Bosch CSW41 7-1/4 In. Worm Drive Construction Saw provides power and versatility – with a large gearing ratio in a compact size. It has sturdy magnesium housing and a die-cast magnesium footplate for true strength and a lifetime of reliable use, as well as a sturdy, rigid motor housing. Only a 13.2 Lbs. saw, it has a fast 15-amp motor that can execute fast cuts with a no-load rpm rating of 5,300. The worm drive design means a left-side blade placement, providing a clear line of sight for right-handed users.

Includes

CSW41 7-¼ in. Magnesium Worm Drive, Multi-Function Blade Wrench, Carbide Blade, Built in Saw Hook

Worm Drive Design

The Bosch CSW41 features a worm drive design for unmatched accuracy, power and durability. The left-side blade placement gives a clear line of sight for right-handed users. The worm drive system features a large gearing ratio in a compact size, for professional power in a manageable package. The 15-amp motor provides plenty of torque, while the rigid motor housing eliminates blade wobble for accurate cuts.

Magnesium Construction

This construction saw features lightweight magnesium housing, for cooler running, and for long tool life. It is built to withstand years of tough worksite conditions. It has a die-cast magnesium footplate for true strength, five ball bearings for added stability, and an advanced oil lubrication system for longer gear life.

Power and Versatility

This saw delivers 5,300 no-load rpm, yet it weighs only 13.2 Lbs. With a 53° bevel capacity and a positive detent at 45°, it can make a variety of cuts. It also has easy-to-access, metal depth- and bevel-adjustment levers that allow users to make quick modifications for multiple cuts and advanced projects. The built-in saw hook lets users take advantage of convenient storage between cuts.

Easy-to-Handle Features

The Bosch CSW41 provides an on-board multi-function wrench that allows users to conveniently change blades, brushes and oil; to adjust levers; and to remove the blade diamond knockout. The saw has easily serviceable brushes and an easy-to-manage spindle lock. The anti-snag lower guard allows for smooth saw operation. The tool features a soft grip for comfort.

Product description

This Bosch miter saw combines professional cutting capacity with outstanding portability to deliver a truly mobile, cordless solution to the jobsite. The GCM18V-08N Surgeon bare tool kit features an 8-1/2 In. single-bevel, sliding compound miter saw delivering a 3-5/8 In. nested crown cutting capacity, cutting from 47° left to 47° right against the fence, which is an exceptional range for a cordless 8-1/2 In. miter saw. At a manageable 31. 5 Lbs. (tool only, not including battery), this saw features easy portability while still providing a 10-5/8 In. crosscut capacity. It features Bosch’s MEGAWATT Technology, a Bosch-exclusive brushless high-performance motor and drive-train system engineered to take full advantage of the additional power generated by 8. 0 Ah and 12. 0 Ah CORE18V batteries (sold separately). In testing, the saw delivers 377 cuts per charge with a CORE18V 8. 0 Ah Performance Battery. With an accurate laser guide system to precisely align the cut line to the blade, the saw is engineered with precisely centered sliding bars, leading to a very smooth and easy saw sliding. It provides a dust chute and dust bag, providing efficient dust collection.

• Portable, powerful 18V miter saw design – a truly mobile jobsite solution, This saw provides light weight and Pro capacity
• Pro capacity – delivers 3-5/8 in. Nested Crown cutting, with 47° left to 47° right cuts against fence and 10-5/8 in. Crosscuts
• Convenient portability – weighs only 31. 5 lbs. (Tool only, not including battery)
• MEGAWATT Technology – a Bosch-exclusive brushless high-performance motor and drive-train system engineered to take full advantage of the additional power generated by 8. 0 Ah and 12. 0 Ah CORE18V batteries (sold separately)
• Accurate laser guide system – precisely aligns the cut line to the blade. Max. Cut Capacity - 0° Miter 0° Bevel-2-3/4 inch x 10-5/8 inch. Max. Cut Capacity - 0° Miter 45° Left Bevel-1-1/2 inch x 10-5/8 inch. Max. Cut Capacity - 45° Miter 0° Bevel-2-3/4 inch x 7-1/2 inch. Max. Cut Capacity - 45° Miter 45° Left Bevel-1-1/2 inch x 7-1/2 inch

User questions & answers

Question:	How many amps is the motor
Answer:	Hi! Since he GCM18V-08N is a cordless tool, the amps would depend on the battery used. For best performance, we recommend using the GBA18V80 8.0Ah battery. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Does this saw have an LED light to create a shadow line or just a laser
Answer:	The GCM18V-08N features an accurate laser guide system – precisely aligns the cut line to the blade. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	What is the blade arbor size for the US version of this saw
Answer:	5/8" minimum arbor. Blade diameter 8¼" – 8½"
Question:	Is there a way to plug in or is a adapter planned for that? Thank you
Answer:	No way to plug in that I know of. Have not heard of any plans to make it adaptable to corded and cordless.

Product features

Bosch GCM18V-08N 18V 8-1/2 In. Single-Bevel Slide Miter Saw

This Bosch miter saw combines professional cutting capacity with outstanding portability to deliver a truly mobile, cordless solution to the jobsite. The GCM18V-08N Surgeon bare tool kit features an 8-1/2 In. single-bevel, sliding compound miter saw delivering a 3-5/8 In. nested crown cutting capacity, cutting from 47° left to 47° right against the fence, which is an exceptional range for a cordless 8-1/2 In. miter saw. At a manageable 31.5 Lbs. (tool only, not including battery), this saw features easy portability while still providing a 10-5/8 In. crosscut capacity.

With an accurate laser guide system to precisely align the cut line to the blade, the saw is engineered with precisely centered sliding bars, leading to a very smooth and easy saw sliding. It provides a dust chute and dust bag, providing efficient dust collection.