13 best ridgid jig saws

Product description

RIDGID introduces the 18-Volt OCTANE Lithium-Ion Cordless Brushless Jig Saw (Tool Only). OCTANE Tools feature high performance brushless motors and advanced electronics, providing best-in-class power and intelligence. This tool delivers up to 45% faster cutting in high demand application. With registration, this tool is backed by the Industry’s Only Lifetime Service Agreement. Included with the OCTANE Brushless Jig Saw are the jig saw blade and an operator's manual.

• Brand New in box. The product ships with all relevant accessories

User questions & answers

Question:	Where is it made
Answer:	The 1250DEVS is a BEAST of a sander. I've used it specifically for end grain cutting boards and on "turbo" mode I was shocked at how well it worked. Better than a belt sander. Some 40 and 60 grit discs (good ones, zinc stearate coated zirconia alumina or ceramic alumina) will make short work of your job. Follow up with some regular aluminum oxide discs on RO mode and get a great finish. I'd use the 1250DEVS for end grain boards over the ROS65VC.
Question:	Why are you advertising the octane r8832b jigsaw, but the picture is showing the older genx model
Answer:	Currently using a 5TB Seagate USB3.0 portable hard drive without any problems.
Question:	dose it use two battery's at once
Answer:	No. I recently attempted to use the Client Mode (Cat5 PC -> TPLink / Wireless TPLink -> Hotel Wi-Fi) without success. The hotel tech support attempted to assist quite thoroughly. The TP-LINK TL-WR702N Client Mode needs to connect to a WAP that uses UN/PW for authentication. It does not support 802.1X protocol (open insecure WAP followed by a webpage where you provide your information and/or click the "agree" button) in order to receive an IP (nor does the product information claim that it can). This means it won't connect at malls, airports, coffee houses and some brands of residential Wi-Fi when they use the same connection method. Other reviewers write TPLink has another product that does. It DOES connect excellently to WEP, WPA, WPA2 Wi-Fi WAPs that use UN & PW including most residential and cellphone hot-spot. So in my recent hotel experience, I hot-spotted my iPhone 5S for my connection. If this were my review, I give it 5 stars for design, performance and ease of use (as designed).
Question:	Does this item come with the lifetime replacement warranty
Answer:	Generally, you can only use a 2 TB or smaller USB drive that hasn't been reformatted. Here are the limits as I know them: 1) Only FAT (File Allocation Table), FAT32, and an old version of NTFS are supported. 2) Intel GUID Partition Table (GPT) and Linux ext3 formats are not supported. So it must be a WinXP-or-below PC-formatted drive, not Mac or Linux, and not a modern NTFS, which uses dynamic or GPT partitioning. 3) Because GPT volumes are not supported, 2TB is the max volume/partition size. 4) Maximum file sizes are as follows: FAT: 2 GB. FAT32: 4 GB. WinXP NTFS: Volume Size. So, you will have trouble storing some HD movie or TV shows if you are using a FAT-formatted volume. To create the old-style NTFS format, you will need a Win XP or 2000 computer. 5) You are limited to using the first 8 volumes/partitions on the drive. 6) The drive cannot be encrypted. 7) If the drive is powered off the USB port on the router, then it cannot draw more than 500mA.

Product description

The only flexible extension where entire outer surface does not rotate

• The only flexible extension where entire outer surface does not rotate
• Outperforms the competition based on independent test results
• This product is made of high quality material

User questions & answers

Question:	does it have enough power to cut into 1 1/2" wood
Answer:	I have cut up to 3/4 with no problem. However, I would not buy thisione again. It's difficult following the cut line with this tool. Hard to view the cut line when cutting.
Question:	How do I know what brushes to buy for jig saw r
Answer:	https://www.amazon.com/Ridgid-R3030-R3101-Replacement-290848001-2pk/dp/B00KB7I38I Here on Amazon. Good luck!
Question:	Is this a brand new jigsaw
Answer:	Yes
Question:	Does this tool have a blade storage built into it? Is the stroke long enough to cut at least
Answer:	Yes blade is long enough to cut thru 1 1/2. But no blade storage on tool.

• This Certified Refurbishedproduct is tested and certified by Ridgid to look and work like-new. The product includes all original accessories and is warranted for 1 year.
• BATTERY AND CHARGER NOT INCLUDED
• Variable speed trigger for maximum speed control for varying applications
• Tool-free blade change allows for quick and easy T-shank blade changes
• Hex Grip innovative micro texture for secure grip and user comfort

User questions & answers

Question:	Does this come with any batteries and a charger
Answer:	No, batteries and charger are sold separately.

Product description

The OCTANE Brushless 18V Jig Saw features a High-Performance Brushless Motor and Advanced Electronics that provide best-in-class power and intelligence. While providing increased performance with all RIDGID 18V batteries, OCTANE tools provide maximum performance in high demand applications when paired with OCTANE batteries (not included). Paired with an OCTANE battery (not included), this tool gives up to 45% faster cutting than the previous version. This item is removed from retail packaging for shipping purposes (Bulk Packaged) and will arrive in a generic box. Bare Tool, Battery and charger sold separately

• Lock-on button allows for continuous operation and less user fatigue
• Variable Speed Trigger and Variable Speed Dial for maximum control in every application
• Adjustable Orbital Action provides 4 orbital settings for more precise wood cutting
• Bare Tool, Battery and charger sold separately
• This item is removed from retail packaging for shipping purposes (Bulk Packaged) and will arrive in a generic box

Product description

The 20V 2-in-1 Axis Reciprocating/Jig Saw from Worx saves you time, money, and its compact design saves you from the ache in your hands and arms that typically come with using saws like these. At only 4.2 lbs, this tool is easy to control, which is essential for the complicated designs you expect to cut with a jigsaw. And its vibration-absorbing soft grip handle cuts down on much of the unpleasant motion that’s inherent in using a reciprocating saw. It runs at 3000 rpms with a ¾” stroke length, which is enough to cut 2” into wood and PVC pipe and go 5/32” into steel plate as a jigsaw, and as a reciprocating saw it’ll cut 2” into wood, PVC, and steel pipe. The LED headlamp illuminates dark work areas. And the off switch locks into place to guard against accidental starts. The tool-free blade change system is easy to use and accepts all common reciprocating saw and jigsaw blades that you’ll find at any local hardware store. Don’t buy separate jig and reciprocating saws when the Axis was built from the ground up to accomplish the tasks of both in less time and with less strain on the user. This Axis comes with a 20V 1.5 Ah battery and 0.4A charger, which you can use with any tool in the Worx Power Share family. You save money in the long run when you can share batteries between the cordless tools in your collection.

• [2 SAWS IN 1] Pivoting, push-button head turns your jigsaw into a reciprocating saw and back again in just seconds
• [ORBITAL CUTTING] The slight circular motion is more efficient for most materials than the traditional back and forth stroke. Get the job done quicker, with less strain on your hands
• [DO IT ALL WITH THE SAME BATTERY] Worx Power Share is compatible with all Worx 20v and 40v tools, outdoor power and lifestyle products
• [COMPACT AND LIGHTWEIGHT] At only 4.2 lbs. you can maneuver easily, make intricate cuts, and work longer with less fatigue
• [DUST BLOWER] The integrated blower keeps dust and debris away from the surface of your cut, giving you better visibility of the cut and a more pleasant working environment
• [USE ANYBODY’S BLADES] Though Worx blades are pretty great, you can go down to the hardware store and pick up any standard reciprocating saw and t-shank saw blades to use in this tool
• [CUTS SO MANY MATERIALS] Wood, metal, ceramic, tile, plastic, tree limbs, PVC pipe, fiberglass, aluminum, copper, thin steel, even roots
• [INCLUDES] 20V Axis, 1.5Ah 20V Battery, 0.4A Charger

User questions & answers

Question:	How long does the 20V 27w battery comes with the product last for working
Answer:	Mine comes with 20v(1.5amp) battery. Does not run very long especially when cutting thick materials. So if you are using it to cut thick or alot of materials i suggest you get the 4amp ones. Think of it as if you're going to be outdoors hiking whole day you'll need at least 1 gallon of water but if you're indoors doing only paperwork then maybe a quarter gallon is more than enough.
Question:	How many amp hours is the battery
Answer:	Research online netted the following info: This 20 Volt Max Lithium Battery has an amp hour rating of 4.0 vs our previous models (2.0 and 1.5 amp hour rating). The amp hour rating measures how much energy can be stored in the battery (energy capacity). The 20V Worx 4.0 Ah battery (WA3578) can hold twice the amount of energy as previous models (WA3525). Hope this helps
Question:	How long does the battery last
Answer:	Extremely long for it weight (it very light). I cut the concrete wall, for one charge was was spoiled two-tree saw blades. Around 30 minutes of really hard work.
Question:	On a full battery charge, how long of usage can you get in minutes or hours
Answer:	As u all know with any brand , dewalt , Milwaukee. Even the high end tools only last 15 min with that amp of battery. I cut a piece of 5 inch angle iron and from full charge to dead was 7 minutes and did not complete the task. So up the amp hours or have of these small ones on hand to complete a task. This tool is good for the average homeowner woth short simple task. I habe it to my dad and purchased a dewalt which I have a lot of this brand already. Again Milwaukee is as good as dewalt . Hope this helps

Product features

Cuts Through Almost Anything

Wood, metal, ceramic, tile, plastic, PVC pipe, fiberglass, aluminum, copper, thin steel, even roots and tree branches.

Dust Blower

Keep your project and your workspace clean, so you can see what you’re cutting and enjoy better air quality while you work.

2-Saws-in-1

Turn this saw from a reciprocating saw into a jigsaw and back again with just the push of a button and a pivot of the head.

Orbital Action

The slightly circular motion of the blade is a more efficient way to cut than the strictly back and forth motion of traditional saws.

Tool-Free Blade Change

It’s easy and safe to change out blades. And this saw is compatible with both jig and reciprocating saw blades from most major brands.

Highly Maneuverable

Reciprocating saws are for cutting out complex shapes with lots of twists and turns. So we made this saw lightweight, compact, and cordless. That comes in handy in reciprocating saw mode, too, as you can get into tighter spaces to take down drywall, pipes, and the like.

Flips Into Action

Just push the big red button to unlock the head and flip it up or down, and it locks into place. With 2 fully-featured saws in 1 you save the expense of buying a separate saw and gain the convenience of having one less tool to take to the worksite.

• 🔥Ideal gift for Valentine's Day
• 【LED + Laser & Dust Extraction】Built-in laser guides your cutting line and LED light illuminates front area, ensuring increased visibility and precise cutting even in dim light; Clear sawdust by using the dust blower or connecting the dust port to a vacuum cleaner for clear sight of cutting line and neat working environment
• 【3000 SPM Power& 6 Speed Settings】6.7 Amp pure copper motor generates up to 3000 SPM cutting power, delivering more powerful and efficient cutting performance; 6-position variable speed allows you to control the speed and accuracy of cuts and to tackle a variety of applications and materials with greater finesse
• 【4-Position Orbital Action】0 to 3 customized orbital settings allows you to adapt the cutting motion to fit different type of cuts and materials; higher orbital setting for softer materials and faster cutting; lower orbital setting for harder materials and more precise cuts
• 【45°Bevel Cutting & Tool-free Blade Changing】Adjustable aluminum footplate enables the jig saw to make bevels up to 45° both to right and left for more versatile uses like tangent, beveling or curved cuts; Quick release chuck allows for quick and tool-free blade removal
• 【Switch Lock Design & More Accessories】Press the lock button on the handle when the trigger is on can keep the saw working without keeping pressing the trigger, reduce hand fatigue after long time work; Come with 1 x sturdy carry case, 1 x rip fence, 1 x Allen wrench, 1 dust exhaust pipe, 6 x replaceable blades

Product features

TACKLIFE Advanced 6.7Amp Variable Speed Jigsaw with Laser & LED

Tacklife PJS02A jigsaw is a powerful multi-functional jigsaw that can be widely applied to various materials like PVC, plywood, vinyl planks, solid hardwood, aluminum, thin metal sheet, etc. and to tackle with different cutting tasks such as curved, straight, bevel, or plunge cuts.

Comfortable: Work longer time with less fatigue thanks to anti-skip, ergonomic handle

Flexible: A long cord (10 feet / 3 M) gives you ease of movement and flexibility with less restrictions

Adjustable: Tacklife PJS02A jigsaw can make bevel cuts up to 45°right or left while the adjustable shoe maintains cutting stability

Convenient: Come with 6 blades (2 blades for metal & aluminum, 4 blades for wood & plastic) in carrying case for added user convenience

Practical: Tacklife 6.7 Amp 800W jigsaw features constant response circuitry which perfect for job site use or for DIY projects around your home

6 Replaceable Blades for Different Applications

Basic for metal - for thin metal (<10mm)

Basic for wood - for curve cut

Speed for wood - for cork wood, quick cut

Clean for wood - for hardwood, clean cut

Progressor for wood - for plunge cut

Make Straight Cuts with Metal Guide ( Rip Fence )

• Step 1: Check and make sure the edge of the board is straight and smooth
• Step 2: Adjust the base to make sure the saw blade is perpendicular to it
• Step 3: Determine the position of the straight cutting line, add the metal guide to the jigsaw base (keep the metal guide against the straight edge of the board), adjust the position of the guide and fix it
• Step 4: Push the jigsaw along the straight edge to make straight cut

Laser & LED Light Adjustment

Laser & LED Switch - 4 Modes:

laser (on) - LED (on) - laser & LED (on) - laser & LED (off)

Make sure the laser is in line with the saw blade. You can adjust the laser direction by follow the steps below:

Prize up the tiny black shell under the laser & LED button, then plug a fine Allen key into the tiny hole to adjust the laser line

(Please refer to the video guide “how to adjust the laser line” on videos for this product )

Bevel Angle Adjustment

• Step 1: Unscrew the nut of base with an Allen wrench
• Step 2: Adjust the angle of jigsaw to desired angle, then push the jigsaw slowly until it lock with card slot
• Step 3: Tighten the nut with an Allen wrench until the jigsaw is secure

Product description

The PORTER-CABLE PCE345 6 amp Orbital Jig Saw is designed with a 7 position speed dial (0-3200 rpm) integrated into the trigger which provides multiple speed settings for optimal cutting results. The 6 Amp motor delivers more power in demanding applications, and the 4 orbital settings provide best cutting performance in a variety of materials. It offers a lock-on button that provides easier control during prolonged use, and help to diminish user fatique, along with an oversized front and handle overmold that provide greater control and comfort during use. This jig saw also offers tool-free blade change to make blade replacements fast and easy and minimize down time.

• 7 position speed dial integrated in the trigger
• 6 amp motor for more power
• 4 orbital settings for a variety of materials
• Lock-on button for prolonged use
• Tool free blade change

User questions & answers

Question:	Is it 110V only
Answer:	I don't know without digging it out of the garage, but I don't remember mine having a laser on it. Maybe you have another model than mine
Question:	Does the saw take U-shank or T-shank blades
Answer:	Yes
Question:	Dose this tool have a case , if so how much will it cost & and where can I buy it
Answer:	That might depend on the thickness and type of plastic. Very thick, dense plastics with a low melting point might melt a bit. Most wouldn't melt. Glass, is not really suited to this kind of cutting tool, besides it is usually scored and cracked apart. If you need curves in glass, score the curve once and make radial scores away from the curve and break it off in smaller sections.
Question:	Im cutting inch thick trim thats in place can i set the blade cutting depth
Answer:	It does not come with a case.

Product description

ORBITAL JIG SAW 5.0 AMPS - Stanley Black & Decker is a world-leading provider of tools and storage, commercial electronic security and engineered fastening systems, with unique growth platforms and a track record of sustained profitable growth. Included Components: BDEJS600C Jigsaw, Jigsaw Blade; Stroke Length: 3/4 in; Stokes per Minute: 3 000 spm; Tool Weight: 4.6 lbs

• Curve Control technology which allows you to adjust the saw's orbit in 1 of 4 customized settings
• 5 Amp variable-speed motor; up to 3,000 SPM of cutting power
• Can make 45 degree bevel cuts; with adjustable shoe for stability
• New and improved Wire Guard
• Dust blower
• New and improved Wire Guard for more precise cuts
• Keyless blade clamp for tool-free blade change

User questions & answers

Question:	Can you cut nails off of pallets
Answer:	Yes you can. Use a fine blade and put duc tape on both sides of the glass mark your line on the tape then cut
Question:	Will this be strong/accurate enough to cut the shape of a knife handled through a 2"x 10" x 1/2 inch think hard blog of jeans and fiberglass resin
Answer:	Yes. The harder you pull on the trigger the faster it goes.
Question:	does this come with blades, what is recommended
Answer:	Hi, Thank you for getting in touch! It is to inform you that it can cut nails but you may want to purchase appropriate blades for cutting metal. I hope this information addresses your needs. We look forward to welcoming you as our customer. Yours Sincerely, Sarfraz Customer Support Representative Tempus & Co.
Question:	What blade type/model can you use? Is there a specific blade made for this jigsaw
Answer:	The "orbital" refers to the circular motion of the blade. It moves up and down (as if on a y-axis) and also forward and backward (as if on the x-axis). The forward/backward motion is very slight compared to the up/down motion. It makes the cut more aggressive and a lot faster. Breaking down 2x4's goes very quickly. However, you can set the orbital motion from min to max, so this is very adjustable and this saw can still make very accurate cuts with the right blades.

• This Certified Refurbished product is tested & certified by Ryobi to look and work like-new. The product includes all original accessories, and is backed by a 1 Year warranty.
• BATTERY AND CHARGER NOT INCLUDED
• SpeedMatch selector matches cut speed and type to any application correctly with orbital and non-orbital settings
• Powerful sight line blower clears debris for more accurate cutting
• Powerful motor provides corded performance in battery operated tool with speed range from 1,100–3,000 SPM

User questions & answers

Question:	Does it come with battery and charger
Answer:	No. Tool only. Not even a case. Just refurbished tool in plain box. That’s it. Nothing else.
Question:	Will it work with a one-plus 18volt ni-mh battery versus the same in a lithon-ion
Answer:	I believe it will
Question:	Does it use T-shank or U-shank blades
Answer:	T- shank, I had to start stocking these.
Question:	Does this come with universal 110-220V charger or is it only for US market
Answer:	U. S. Only

Product description

RIDGID introduces the 18-Volt OCTANE Cordless Brushless JobMax Multi-Tool with Tool-Free Head. The 18-Volt OCTANE Brushless JobMax Multi-Tool features high performance brushless motors and advanced electronics that provide best-in-class power and intelligence. While providing increased performance with all RIDGID 18-volt batteries, OCTANE tools provide maximum performance in high demand applications when paired with OCTANE batteries (batteries not included). Paired with an OCTANE battery (battery not included), this tool gives longer runtime and a longer tool life.

• Brand New in box. The product ships with all relevant accessories

User questions & answers

Question:	Where can I find a replacement brushless motor
Answer:	Height and it's a beautiful piece too. Everybody is commenting on it.
Question:	I have issues when the oscillating tool head overheats the unit and shuts down frequently. does the octane version fix this
Answer:	I think it could work if you attach the two or three together and have support on two sides.
Question:	can you charge the new octane battery with the older 18v charger and use both batts on the multi tool
Answer:	Probably not. I have regular sized wine bottles in mine and they fit just right. I don't have any fatter bottles to experiment with, but it doesn't look like there is much more space. The diameter of the opening is just about 3 and 3/8 ". Hope this helps.
Question:	Does this work with the Hyper Li 18v battery
Answer:	The holes in the rack are big enough to hold a wine bottle. A 2 liter soda bottle would be too fat.

Product description

RIDGID introduces the 18-Volt Cordless Jig Saw Console (Tool Only). The RIDGID 18-Volt Cordless Jig Saw Console is fully compatible with all RIDGID 18-Volt slide battery packs (Sold Separately). The jig saw features a tool-free blade change design and variable-speed switch to help match the appropriate speed to each unique application. Multiple orbital selections for wood cutting ensure an exact cut every time and the Hex Grip technology provides superior ergonomics for extended use. Battery and charger sold separately. This item is removed from retail packaging for shipping purposes (Bulk Packaged, No Retail Packaging) and will arrive in a generic shipping box or bag

• Tool-free blade changes allow for quick and easy switching
• Variable-speed trigger for maximum control in any application
• Tool-free bevel for ease and convenience
• Battery and charger sold separately
• This item is removed from retail packaging for shipping purposes (Bulk Packaged, No Retail Packaging) and will arrive in a generic shipping box or bag

Product description

The WORX WX543L Jigsaw has an Oribital mode for those tough reciprocating tasks, as well as a variable speed trigger for precise control in both modes. It also has variable speed for controlled cutting on various materials. The jigsaw is powered by our efficient 20V maxlithium battery and is part of the 20V power share platform that lets you share batteries among multiple 20V tools, saving you time and money.

• Dual switch and comfortable handle design for easy operation
• Tool-free blade change system
• Orbital function for improved cutting efficiency
• Variable speed for controlled cutting on various materials
• Includes 1 blade, 1.5Ah 20V battery, 1 charger

User questions & answers

Question:	How do I go about returning/exchanging this? The massager tips don’t fit with this model
Answer:	They are removable , once u remove it , u can't stick it again like the new one , it would not stick to the wall that good .. The look of the clock is fabulous ..
Question:	what is blade type for this jigsaw
Answer:	Yes
Question:	Anyone know what the current draw is on this saw
Answer:	I use a damp washcloth and baby-safe all purpose detergent, then I pat-dry with a dry cloth and allow to completely air dry before I repack the tiles.
Question:	Does the prodact including batery carger? and does the charger fit to israel 230v
Answer:	The material in the Skip Hop Playspot Foam Play Mat is non toxic.

Product features

Stellar Precision

With a no-load speed of 18,000 revs per minute, this blower has the power for tackling any job when it comes to sawing. The WORX WX543L 20V Jigsaw is cordless and comes with an orbital function that gives you an improved cutting efficiency.

Long-lasting and Stunning Performance

The powerful 20V MaxLithium battery ensures a long-lasting performance. It is also extremely user friendly as it is lightweight and portable. The tool design forces the vibration into the blade and away from your hands, making it super easy to use.

Great Cut-line Visibility

Not only is the WORX WX543L 20V Jigsaw lightweight and simple to use, but also includes the tool-less blade change feature. Moreover, the LED light allows clear visibility for a precise cut.

• 🎁Ideal gift choice🎁 🔥Perfect tool for home project🔥
• ☘【20V Lithium-ion Battery with Charger & LED】- TACKLIFE cordless jigsaw powered by a 20-Volt Max lithium-ion battery, cordless versatility could be used at anytime and anywhere. Pressing the button could display electric quantity. The LED light illuminates your workplace automatically while working for clear visibility in a dark environment.
• ☘【2700 SPM Power& 6 Speed Settings】- TACKLIFE cordless jigsaw generates up to 2700 SPM cutting power with 6.7 Amp pure copper motor, delivering more powerful and efficient cutting performance; The stroke length is 4/5’’; 6-position variable speed allows you to control the speed and accuracy of cuts and to tackle a variety of applications and materials with greater finesse.
• ☘【4-Position Orbital Action & 45°Bevel Cutting】- 0 to 3 customized orbital settings, the cutting motion to fit different type of cuts and materials; higher orbital setting for softer materials and faster cutting; lower orbital setting for harder materials and more precise cuts. 0°- 45°bevel cutting could satisfy most of your demands, like curve, straight line or slant cutting. Aluminum surface is also more durable than normal iron plate and can work to eliminate vibration during operation.
• ☘【Dust Extraction$ & 6 x Blades】- TACKLIFE cordless jigsaw, including an adjustable dust blower to help keep the cutting line clear, there are also two choices of blower switch: when push it forward, it could connect a vacuum cleaner to suck the dust; when push backwards, it could blow most sawdust directly. Come with 6 x replaceable blades, 4 x for wood (depth for 3.15in ), 2 x for metal (depth for 0.24in ). The nylon fabric bag is portable to pack all the accessories and saw to anywhere.
• ☘【Switch Lock Design & Tool-free Blade Change】- Press the lock button on the handle, the trigger be on can keep the saw working without keeping pressing the trigger, reduce hand fatigue after long time work. Quick release chuck allows for quick and tool-free blade removal

Product features

About Tacklife

At Tacklife, we aim to manufacture the best products that inspire our consumers to live a more convenient, secure life.

We have our professional products monitoring team to focus on every single detail that matters to you and develop well-made, portable, exquisite products.

TACKLIFE DJS20A 20V 2.0Ah Cordless Jigsaw with Battery, Charger, LED, 6 Blades

• Battery powered design with charger is ideal for working when cutting in forests or somewhere the electric cannot be offered easily.
• 20V /2.0 Ah cordless jigsaw delivers 2700SPM running power to the compact circular saw for efficient cutting performance
• With the adapter, it’s convenient to connect the dust port to your vacuum cleaner, ideal for maximizing dust collection efficiency to maintain a clean environment
• The guide ruler is ideal for a parallel cuts with ease