12 best skil wet saws

Product description

SKIL 3540-02 7" Wet Tile Saw complete tiling projects easily with the model 3540, 7 in. Wet Tile Saw. The stainless steel top resists corrosion and the adjustable rip fence with miter gauge ensures accurate straight and miter cuts. Skil 3540-02 7" Wet Tile Saw features: Stainless steel table top is resistant to corrosion adjustable rip fence with miter gauge for accurate straight and miter cuts 0-45 degree level for a wide range of cuts blade cooling water reservoir to keep blade cool and minimize dust and debris 7" diamond blade for fast and smooth cutting SKIL 3540-02 7" Wet Tile Saw specifications: Amperage: 4.2 Arbor Size: 5/8" Bevel angle range: 0-45 degrees Bevel Stops: 0 Degrees, 45 Degrees Blade Diameter: 7" Depth of Cut at 45 Deg. : 1" Depth of Cut at 90 Deg. : 1-3/8" Length: 14" Name: 3540 (S12) No load RPM: 3600 Voltage: 120V AC only weight (lbs. ): 18 Width: 13.25."

From the Manufacturer

Skil benchtop power tools are quality tools at a great price!

• Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch
• Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Blade cooling water reservoir to keep blade cool while minimizing dust and debris
• Bevel cuts tile from 0 to 45 degrees. Cut material: Stone/Masonry
• Cross cut capacity: 7.75-inch; Diagonal cut capacity: 7.25-inch

User questions & answers

Question:	this saw comes w/a diamond blade. would it be good enough to cut little glass mosaic tiles or should I order a different diamond blade
Answer:	The blade will cut through the glass tiles just fine, however, I would suggest purchasing a thinner more durable blade. I purchased a Ridgid 7" blade from Home Depot. The Ridgid blade make cleaner cuts and wastes less material because it is a thinner blade.Also, Skil just came out with a new updated model of this saw. I would suggest purchasing that saw instead because it has some much needed improvements. Here is some information on the new saw: https://www.skiltools.com/Tools/Pages/ProductDetail.aspx?model=3550-01.
Question:	What is the biggest size of tile this saw can be used for to do diagonal cuts
Answer:	am sure you can cut even 24x24 in. tile. to cut straight get 1x1x 20--24 in, wood and clamp under the table as your guide to cut straight,hope this will help. skil power tools are great and cheaper than MK
Question:	Would this be a good saw to cut rocks in half
Answer:	Depends on the size of the rock. The material is not an issue -- I use it to cut agates and quartz up to a couple inches in size. The important thing is to go slow and make sure to keep the cut wet.
Question:	Will this saw cut peanut brittle? We are currently struggling with the batch we just made and we need to find a good way to cut it
Answer:	i'M SORRY, BUT NO THIS WILL NOT CUT THE BRITTLE. this saw was designed for tile, brick and old tootsie rolls only. the reason tht is, the hamsters in the the motor are allergic to peanuts and a few other foods. seeing as how we all love fluffy hamsters, they gave them work instead of turning them away( that and hamsters have a ton of kids!!). the saw you are looking for has gophers in the drive motor( 2 x's the power for those thick piece's of brittle), that have been thoroughly screened for any deadly allergies to tree nuts and dairy, not to mention sock puppets and shoe polish as well. i do suggest that if you are going to buy the gopher powered brittle slicer 3000xlr made by Skill'dG( skilled gophers), to make sure you are getting the real thing, and not a cheap australian clone. contact the gopher union work force development office and they will give you a list of all non gopher supported and wallaby knock offs and a wallet sized card for easy recognition of their branded products. They may ask for a donation, but it's well worth the $120 to join their non members club. You get free holes in your green, and much, much more. Good luck on your quest, and may the spork be with you.

Product features

Stainless Steel Table Top

A stainless steel top will resist corrosion after multiple uses.

Adjustable Rip Fence with Miter Gauge

The adjustable rip fence with miter gauge will allow you to make accurate and straight miter cuts.

Bevel Cuts Tile

For more intricate designs or to tackle those end pieces, the 0-45 degree bevel will provide flexibility for various cut types.

Blade Cooling Water Reservoir

The constant flow of water keeps blade for overheating and helps minimize dust and debris while cutting tile.

More About This Product

• Amperage: 4.2
• Rating: 120V AC Only
• No Load RPM: 3,600
• Blade Diameter: 7 In.
• Miter Angle: 0-45 Degrees
• Bevel Positive Stop at: 0, 45 Degrees

Product description

Whether you're updating or renovating, adding tile to your kitchen or bathroom is now easier than ever with the SKIL 7-inch Wet Tile Saw (3550). The saw's innovative HydroLock System keeps water splash to a minimum so tiles can be cut in the room where they're being installed. You no longer need to go back and forth to a saw set up in the garage or outside to cut the tiles, so the SKIL tile saw with HydroLock System helps you finish the project faster too The 3550 works with a 7-inch continuous rim diamond blade, which provides efficient and even cutting. It also comes equipped with a durable rust-resistant aluminum table top and a sliding side extension that can be used to support tiles up to 18 x 18-inch.

• Hydro lock water containment system keeps water contained near the blade and reduce clean-up time
• Sliding side extension provides support for tiles up to 18 x 18-inch
• Aluminum table top is a durable, rust-resistant surface
• Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Bevel cuts tile at 0, 22.5 and 45 degrees, giving flexibility for different cut types

User questions & answers

Question:	will this saw, with the standard blade that comes with it, cut glass bottles
Answer:	I don't know for sure. I did cut quite a lot of glass tile. I had to a different blade for glass. it did an exceptional job. In fact i used it to install 2500 sqft of tile in my house. It still has good life left in it.
Question:	Need to slice 1/8"-1/2" glass rods coe 104 & 32. Slice cylinder= thickness of rod & length of 4mm. cut should be clean but not pristine. Will thiswork
Answer:	Thank you for your question. The Skil 3550 is not designed for cutting glass, it is designed for cutting tile. If you have further questions please feel free to contact our Skil Customer Service Representatives at 1-877-754-5999
Question:	Does this include a blade? The info @ Amazon says bare tool, yet the Skil website says yes
Answer:	Yes, the blade is included. The tile saw includes the 7 in. Diamond Blade, Side Extension, Rip Fence, Miter Gauge, Blade Guard and Blade Wrench.
Question:	Why is this model so much more expensive than the model is replaced? The 3540-02 was half this price, so what is the difference
Answer:	Thank you for your question. The Skil 3550 can cut tiles up to 18x18 inches, has an aluminum table top and also our Patent Pending HydroLock System which is an innovated upper and lower guard design that keeps water contained near the blade. The Skil 3540 cuts tile up to 12x12 inches, has a stainless steel table top and does not have the HydroLock System. If you have further questions please feel free to contact our Skil Customer Service Representatives at 1-877-SKIL-999 (1-877-754-5999).

Product features

SKIL 3550-02 7-Inch Wet Tile Saw with HydroLock Water Containment System

Whether you're updating or renovating, adding tile to your kitchen or bathroom is now easier than ever with the SKIL 7-inch Wet Tile Saw (3550). The saw's innovative HydroLock System keeps water splash to a minimum so tiles can be cut in the room where they're being installed. You no longer need to go back and forth to a saw set up in the garage or outside to cut the tiles, so the SKIL tile saw with HydroLock System helps you finish the project faster too! The 3550 works with a 7-inch continuous rim diamond blade, which provides efficient and even cutting. It also comes equipped with a durable rust-resistant aluminum table top and a sliding side extension that can be used to support tiles up to 18 x 18-inch.

Product description

SKIL 3540-02 7-Inch Wet Tile Saw

Skil Benchtop Power Tools are Quality Tools at a Great Price !

Skil 3540-02 7" Wet Tile Saw Complete tiling projects easily with the model 3540, 7 in. Wet Tile Saw. The stainless steel top resists corrosion and the adjustable rip fence with miter gauge ensures accurate straight and miter cuts. Skil 3540-02 7" Wet Tile Saw Features: Stainless Steel Table top is Resistant to Corrosion Adjustable Rip Fence with Miter Gauge for Accurate Straight and Miter Cuts 0-45 Degree Bevel for a Wide Range of Cuts Blade Cooling Water Reservoir to Keep Blade Cool and Minimize Dust and Debris 7" Diamond Blade for Fast and Smooth Cutting Skil 3540-02 7" Wet Tile Saw Specifications: Amperage: 4. 2 Arbor Size: 5/8" Bevel Angle Range: 0-45 degrees Bevel Stops: 0 Degrees, 45 Degrees Blade Diameter: 7" Depth of Cut at 45 Deg. : 1" Depth of Cut at 90 Deg. : 1-3/8" Length: 14" Name: 3540 (S12) No Load RPM: 3600 Voltage: 120V AC Only Weight (lbs. ): 18 Width: 13. 25"



QEP 6-7001Q 7" Continuous Rim Diamond Blade For Wet Tile Saws For Ceramic Tile

The QEP 6-7001Q 7 in. Continuous rim diamond blade provides accurate cutting with minimal chipping. The blade is specifically engineered for cutting ceramic tile. Designed for wet cutting and long lasting performance.

• Product 1: Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch
• Product 1: Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Product 1: Blade cooling water reservoir to keep blade cool while minimizing dust and debris
• Product 1: Bevel cuts tile from 0 to 45 degrees. Cut Material: Stone/Masonry
• Product 2: Exact specifications assuring the user a wobble-free blade that produces smooth and precise cuts
• Product 2: General purpose blade for wet/dry cutting of ceramic
• Product 2: Diamond blade for long-lasting performance with minimal chipping
• Product 2: 8730 maximum RPM, arbor size of 0.625 in.

Product description

When there’s concrete to conquer, MEDUSAW makes the job a whole lot easier. It’s the world’s first fully integrated saw designed specifically for scoring and cutting concrete accurately. Forget modifying an old saw. This one’s got our legendary SKILSAW worm drive power train, plus a unique Cut-Ready adjustable plunge lock and a pivoting pointer for unmatched precision and convenience. Used wet or dry, the dual integrated dust management system takes dust out of your way. And rust resistant brackets and fasteners resist corrosion for long life. Armed with MEDUSAW, you’ll power through the toughest concrete jobs. It’s all part of the performance legend that is SKILSAW.

• Worm drive geared concrete saw delivers a complete cutting system
• Cut-ready adjustable plunge lock and retractable front pointer guides saw along cut line and retracts for tight spaces
• Wet/dry dust management system controls dust for cleaner cuts
• Gfci protection reduces risk of shock to user
• Rust resistant brackets and fasteners protects against corrosion

User questions & answers

Question:	Does it come with a blade
Answer:	Yes it does
Question:	ce cerficate
Answer:	I Goggled this question and is's a 5 h.p.
Question:	How deep of a cut can it make.? I need to cut through 4 inch slab
Answer:	No blade
Question:	How deep this saw Cat
Answer:	Up to 5"

Product description

SKIL 3540-02 7-Inch Wet Tile Saw

Skil Benchtop Power Tools are Quality Tools at a Great Price !

Skil 3540-02 7" Wet Tile Saw Complete tiling projects easily with the model 3540, 7 in. Wet Tile Saw. The stainless steel top resists corrosion and the adjustable rip fence with miter gauge ensures accurate straight and miter cuts. Skil 3540-02 7" Wet Tile Saw Features: Stainless Steel Table top is Resistant to Corrosion Adjustable Rip Fence with Miter Gauge for Accurate Straight and Miter Cuts 0-45 Degree Bevel for a Wide Range of Cuts Blade Cooling Water Reservoir to Keep Blade Cool and Minimize Dust and Debris 7" Diamond Blade for Fast and Smooth Cutting Skil 3540-02 7" Wet Tile Saw Specifications: Amperage: 4. 2 Arbor Size: 5/8" Bevel Angle Range: 0-45 degrees Bevel Stops: 0 Degrees, 45 Degrees Blade Diameter: 7" Depth of Cut at 45 Deg. : 1" Depth of Cut at 90 Deg. : 1-3/8" Length: 14" Name: 3540 (S12) No Load RPM: 3600 Voltage: 120V AC Only Weight (lbs. ): 18 Width: 13. 25"



M-D Building Products 49827 Gum Rubber Grout Float (PRO), 1 PACK, Black,Yellow

Gum Rubber Float is used to spread grout into the joints when grouting ceramic tile. Designed with both beveled and straight edges for greater control and coverage, all with the comfort of a TPR handle.

M-D Building Products 49827 Gum Rubber Grout Float (PRO)

• Product 1: Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch
• Product 1: Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Product 1: Blade cooling water reservoir to keep blade cool while minimizing dust and debris
• Product 1: Bevel cuts tile from 0 to 45 degrees. Cut Material: Stone/Masonry
• Product 2: Beveled edge with rounded front edges for perfect control
• Product 2: Squared-off back corners allow for complete grout coverage

• 1 of SKIL 3540-02 7-Inch Wet Tile Saw
• 1 of QEP 6-7003Q 7 Inch Diameter Continuous Rim Premium Diamond Blade for Wet Cutting Porcelain and Ceramic Tile, 5/8 Inch Arbor, 5500 Maximum RPM

User questions & answers

Question:	Will this saw cut stainless steel subway tiles
Answer:	don't know. usually Japan, not sure. check with seance,they know

• Hydro lock water containment system keeps water contained near the blade and reduce clean-up time
• Sliding side extension provides support for tiles up to 18 x 18-inch
• Aluminum table top is a durable, rust-resistant surface
• Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Beveled edge with rounded front edges for perfect control
• Squared-off back corners allow for complete grout coverage

Product description

The CM4SB2 4" Dry-Cut Masonry Saw cuts smoothly through tile, marble, granite, concrete, brick and similar materials. It is the ideal dry-cut saw for professionals who demand a workhorse of a tool at a competitive value.

• Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT
• Compact at 8-1/8" in length and lightweight at only 6. 2 lbs, this saw is easy to use all day
• Comes with a premium 4" continuous rim diamond blade designed for high-performance in dry-cutting
• Hefty 11. 6 Amp (2090 Watt Output) motor produces a no-load speed of 11500 RPM for greater cutting efficiency through the toughest materials
• Sealed armature coil is protected from dust and debris- ideal for dry cutting applications
• Metal seated ball bearing wards off damage to the motor caused by high temperatures and vibration, adding to its overall performance and durability
• One touch lever adjusts the depth of cut quickly and easily

User questions & answers

Question:	Can it be used as a wet saw
Answer:	yes
Question:	Will this cut through a 4" slab
Answer:	I'm not sure. I just used it the way it came with 16 gauge brads. I was just using it on 3/8" trim and had no problems with it. I'd have to find my owners manual and see if it even mentioned a depth setter. Hopefully someone else can respond with more specificity.
Question:	Can this cut through patio concrete
Answer:	I've never used it for framing, but, it did great with the brad guns and never had to wait for the tank to catch up. I believe it puts up 150 psi, but, I had it set at 90 psi and had no problems maintaining pressure. I was probably only putting in 5 brads per minute at the most, because I had to keep moving my ladder to get to the next set. I wish I could tell you more, but, that is all I have used it for besides airing up mower and car tires.
Question:	How thick of a paver can this cut? I have travertine tiles for my pool deck that are about 1.25" thick
Answer:	The nail gun is for 16 gauge nails (which are large finish nails) and they come up to 3 1/2" lengths. These nails are not the size normally used for fence work, if you were to use more nails at each point, then it should secure the panels and the nails won't show. The 16 gauge nails do work well for lots of projects though.

Product description

With the capabilities of a standard miter and table saws, the compact SKIL flooring saw model 3601 allows you to cut flooring right where you're installing. Durable, lightweight and portable, DIYers and flooring specialists agree it makes wood floor installation easier and faster.

• Cuts solid, engineered and laminate flooring with ease
• Makes cross, miter and rip cuts
• Lightweight design for transport and use at any project location
• Miter detents at 0, 22.5 and 45 degrees
• Die-cast aluminum miter and rip fence

User questions & answers

Question:	How is the second 45deg cut made on 1/4 round to make piece for the 90deg corner? It’s obvious how to make the 1st 45deg cut, not the seoncd
Answer:	No, the DCCS620P1 does not include a case.
Question:	How well does it handle rip cuts? (specifically for the last row of a floor where you may need to rip the entire length of a board
Answer:	The 20V batteries come in Amp ratings. 2 Amps, 4 Amps, 5 Amps, 6 Amps. For more powerful tools like the Chainsaw, or Leaf Blower or Sawzall Recip Saw, you need 5 Amps and up. Therefore, while you could use any 20V battery, it would drain too fast and damage the battery. The reason the smaller 2 Amp batteries are useful is because they are lighter and you have less hand fatigue using smaller power tools like drill and impact driver. They do fine with 2 amp batteries.
Question:	Is there a dust collection hookup? How much mess does it make
Answer:	Works amazingly well. Cut a tree with about a 16" diameter into pieces. Great saw. Will never buy gas again. (Even after rebuilding carb and replacing feul lines and filter my gas saw gave me troubles)
Question:	How well will this saw cut waterproof vinyl flooring? Is there a special blade I would need
Answer:	The chain is pre sharpened. I also improved mine by using a 14" oregon bar and chain with a guage of 0.50 instead of the 0.43 guage. This saw is powerful enough to use a 14" bar and the 0.50 guage seems to cut much faster.

Product features

Lightweight Design

Easy to transport and use at any project location.

Cross, Miter and Rip Cuts

Cuts through solid hardwood, engineered and laminate flooring.

Miter Gauge

Detents at 0°, 22.5° and 45°, giving flexibility for different types of cuts.

Die Cast Aluminum Miter and Rip Fence

Sturdy, stable and durable miter and rip fence.

More About This Product

• Amperage: 7.0
• Rating: 120V
• No Load RPM: 11,000
• Blade Diameter: 4.375”
• Miter Angle Range: 0°, 22.5° and 45°
• Weight: 24 lbs.

Product description

Expand your woodworking creativity by cutting curves and angles in your projects with our model 4295-01 jig saw. It has loads of easy to use features and can easily handle aggressive, angled or smooth cuts. The variable trigger speed control lets you control the speed of the cut with a touch of the finger. Switching blades throughout your project is effortless with the tool-less blade changing feature. The sturdy steel foot has an open design and there's even a dust blower to ensure there's always a clear view of the cut line. Unlock your creative side with the 4295-01.

• Powerful 4.5 Amp motor
• Tool-less blade change accepts both T and U shank blades
• 2-finger variable speed trigger adjusts speed to cut
• Dust blower keeps cut line clear
• Quick change open foot design improves visibility of cut line

User questions & answers

Question:	Can this make holes in wood or metal
Answer:	Search for it
Question:	Will it cut plexiglass
Answer:	you can use flexvolt in any 20v max tool, so yes
Question:	Does this have a quick release mechanism for the blade
Answer:	1/4" - 1 3/4" coil roofing nails
Question:	is it the first picture or the second
Answer:	1 1/4" nails traditionally

Product description

For cutting irregular shapes and ripping lumber into thinner pieces, novice woodworkers will find the 3386 SKIL 9-inch Band Saw with Light is essential for their workshop. You'll cut through a variety of wood materials with the 6-TPI blade. Make quick angle and height changes with the rack and pinion adjustable table. EZ View Blade Tracking lets you easily align the blade. Other features include a rip fence for straight cuts and a miter gauge for cross cuts. The dust port keeps your work area dust-free, while the LED work light adjusts so that you can see exactly what you're doing.

• Rip fence for straight, accurate cuts; 6 TPI band saw blade cuts through a variety of wood materials
• Articulating LED work light for better view of work piece and cut line
• Features a 1-1/2 inch dust port that keeps work area clear of dust
• Rack and pinion table adjustment for quick angle and height adjustments
• Motor is 1 speed for wood or metal based materials

User questions & answers

Question:	can I cut glass
Answer:	Not unless you can find a diamond/carbide blade - glass is usually cut by abrasion. That would be unlikely for a small saw of this type.
Question:	what are the dimensions of the base....LxW
Answer:	The black base is 14-1/4" long, by 8-1/2 wide, and 2" tall. This SKIL Bandsaw is a wonderful addition to my shop and works beautifully! I have had mine for over 2 years now! Enjoy!
Question:	What are the specs on the included sawblade (TPI and width)? How many saw blades does this come with
Answer:	The blade that's included is 6 TPI. This saw accepts 1/8" to 3/8" blade widths, 59 1/2" and 59 1/4" length blades.
Question:	Can this saw be bolted down to a table? To make less subject to "wobbling
Answer:	Depends on why it wobbles. If it wobbles because it sets on an uneven surface, then yes bolting works. If wobble is from an oblong wheel, out of balance wheel, or something else along thode lines; then no, bolting it down won't help.

Product features

SKIL 3386-01 120-Volt 9-Inch Band Saw with Light

For cutting irregular shapes and ripping lumber into thinner pieces, novice woodworkers will find the new 3386 SKIL 9-inch Band Saw with Light is essential for their workshop. You’ll cut through a variety of wood materials with the 6-TPI blade. Make quick angle and height changes with the rack and pinion adjustable table. EZ View Blade Tracking lets you easily align the blade. Other features include a rip fence for straight cuts and a miter gauge for cross cuts. The dust port keeps your work area dust-free, while the LED work light adjusts so that you can see exactly what you’re doing.

Includes

SKIL 3386-01 120-Volt 9-Inch Band Saw with Light, Blade, Miter Gauge, Rip Fence.

Articulating LED Work Light

The articulating LED Work Light illuminates cut line and ensures proper visibility.

Rack and Pinion Table Adjustment

To quickly make the right angle and height changes, a convenient rack and pinion table adjustment is found on the band saw.

Rip Fence and Miter Gauge

The adjustable rip fence helps guide the work piece for straight and accurate cuts, while the miter gauge comes in handy when making crosscuts.

Dust Port

To minimize dust and debris in the work space, a dust port is available to attach a vacuum hose.

Product description

Super Sawsquatch is the new boss. The biggest worm drive saw on Earth tears through whatever you throw at it. This beast of a saw boasts a 6-1/4 In. cutting capacity to power through 6x in one easy cut. The magnesium, die-cast foot plate guarantees true, square cuts every time. With lightweight, durable magnesium construction, brass worm drive gearing, and our 15 AMP Dual-Field motor and an electric brake that quickly stops the blade, everything about this saw is built to be relentless. The SPT70V-11 includes 16-5/16 In. SKILSAW blade to make perfect cuts right out of the box. Are you ready for this monster.

• 6-1/4 inch cutting capacity for one-and-done, clean cuts through 6x and lumber up to 6-1/4 inch thick
• Largest capacity worm drive circular saw that delivers relentless power for the biggest jobs
• Tough, durable magnesium die-cast footplate ensures accurate cuts every time; All magnesium construction for durability and reduced weight
• 15 amp dual-field motor keeps the motor cooler to provide increased power; Bevel stops: 0°, 45°
• 16- 5/16 inch Skilsaw blade to make perfect cuts right out of the box

User questions & answers

Question:	According to manual "Do not cut materials thinner than 2.5". Does it mean that 2x4, 2x6, 2x10 etc. can't be cut/ripped with this saw
Answer:	Hello Tran, These items are exclusively sold together. Thank you for your inquiry!
Question:	Does anyone make a blade that you can use for ripping I
Answer:	I don’t understand any part of your question. 1; What is the 3410? 2; What is bc? 3; You just bought what saw?
Question:	Can this saw use the 16"+ diablo blade that the makita beam saw uses or does it have to be the Skil brand blade
Answer:	I use the Diablo 8" stack available here inn Amazon for a great price! I have found that even though the saw's manual states a maximum of 1/2" dado, the arbor and mechanism allows for up to 5/8" no problem.
Question:	what is the recommended plug to put on if using in the uk
Answer:	SKILSAW SPT70WT-01 should be the same tabletop as the SKILSAW SPT99-10. It fits on my spt99-10.