12 best portable scroll saw

Product description

The Rockwell BladeRunner X2 Portable Tabletop Saw is the solution to the problem of having to take materials back to the workshop to cut them, and then bring them back to the job site later on. If you’re a contractor, you know that that process can add an entire day to a project. The BladeRunner is only 15 lbs, so while stable and sturdy, it’s easy to toss in the back of the truck. And with a footprint of only 15.75” x 17”, it doesn’t take up an entire workbench like traditional table saws. The hold-down guard and splitter allow for work with wider materials, and a larger rip fence than other portable table saws provides better control and accurate cuts. A no-load speed of 3000/min, a stroke length of ¾”, with 5.5 amps of power gives it the capacity for light to moderate cutting of wood (up to 1-1/2”), ceramic tile (3/8”), PVC pipe (1-1/4”), aluminum (3/8”), and steel (1/8”). (Anything over 1-1/2” and you’re probably going to need a traditional, permanently fixed tabletop saw—but you can’t take that to the job site.) The blades change out almost instantly, in under 3 seconds once you get the hang of the tool-less blade change system. And the saw is protected by a Rockwell 3-year limited warranty, so you know they stand behind their tools.

• [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
• [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
• [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
• [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
• [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
• [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut

User questions & answers

Question:	What is the difference between this unit and the RK7321 BladeRunner
Answer:	It is a 30mm arbor. You have to get metric sizes in blades.
Question:	how would it work w/ making pinewood derby cars
Answer:	the tacklife saw blade has that size arbor ans 120 teeth
Question:	Can it hold up to regular use with 1" hardwood like maple and ash? If not, what will
Answer:	Yes, it can be replaced.
Question:	Is the table made from plastic? It is hard to tell if it is made from black plastic or anodized aluminum
Answer:	No it is not.

Product features

Adjustable Miter Gauge

Make cuts from 0-60° so you can tackle all common woodworking projects that require miter cuts.

Accessory Storage in the Base

For easy transport and organization, just pop the rip fence, miter gauge, and extra blades into the bottom when not in use.

Portable and Powerful

A table saw that you can take with you to the job or easily move around the workshop. Convenient carry handle makes it easy.

Capability of Larger Table Saws

Rip, cross, scroll, and miter cuts are all possible thanks to the standard guard and riving knife system.

5 Blades Included

Wood, ceramic, plastic, aluminum, and metal. Plus, the tool-less blade change system accepts any brand’s standard 4” T-shank blades.

Weighs Only 15 Lbs. for Easy Transport

Throw it in the back of the truck and take it to the job site. That’s not something you can do with a traditional, permanently installed table saw. Saves time when you don’t have to bring materials back and forth between the workshop and worksite.

Make Miter Cuts 0-60° for a Wide Range of Projects

Even though it’s compact, this saw features a standard guard and riving knife system to give you the flexibility and performance of larger table saws. And 5 blades are included to get your started right out of the box.

Product description

The Dremel Moto-Saw offers a compact and easy solution for making detailed cuts in a variety of materials including wood, plastic, laminates and metal. This portable, precision-sawing tool is easy to store, set-up, and operate and features a tool-free mechanism for quick blade changes. The Moto-Saw functions as a stationary scroll saw yet it can be removed from its base to become a portable motorized coping-saw.

• Dust port adapter keeps line-of-sight clear and work space clean
• Auto tensioning quick-change mechanism for easy accessory change and optimal blade tensioning
• Detachable coping function for handheld use to take the tool to the work piece
• Variable-speed control for optimal cutting in a variety of materials
• Fast-clamp base attaches to various tables, benches and surfaces
• Blue edge guide locking levers illustrated on packaging are not included in the kit and do not affect performance of the tool

User questions & answers

Question:	PLEASE is it possible to cut acrylic plastic sheet 3 mm thick PLEXIGLAS and get a reasonable finish TO EDGES
Answer:	Yes 2-in a package
Question:	It comes with the piece that provides angled cut? If not what is the name of the part
Answer:	Yes they work perfectly for attaching a artificial fence on the table saw
Question:	Do u need a Dremel to run or power it
Answer:	Its about 1/4 in diameter and about 11/2 inches long
Question:	Is this a good scroll saw for a beginner? Is it quiet
Answer:	I bought the TK-6 clamp in March 2019 and I received two clamps.

Product features

Cuts Variety of Materials

Make detail cuts in materials such as wood, plastic, laminates and metal.

Detachable Coping Function

Functions as a stationary scroll saw or remove it from its base to become a portable motorized coping saw.

Auto Tensioning Quick Change

For easy accessory change and optimal tensioning, this feature keeps the blade taut so it’s ready to cut.

Clamp Base

Fast clamp base attaches to various tables, benches and surfaces.

MS50 Side Cutting Blade

Side cutting blade is perfect for making straight and curved cuts in larger pieces of wood and plastic materials, leaving a fine and precise finish. Pin-end design allows easy, tool-free blade changes.

MS51 Wood & Plastic Blade

Wood and plastic cutting blade is perfect for making straight and curved cuts in soft wood, plastic, foam, carpet and other soft materials. Pin-end design allows easy, tool-free blade changes.

MS52 Fine Wood Blade

Fine wood cutting blade is perfect for making straight and curved cuts in wood and plastic materials, leaving a fine and precise finish. Pin-end design makes changing your Moto-Saw blades fast, easy and tool-free. Includes four MS52 wood cutting blades and one bonus MS50 side cutting blade.

MS53 Metal Blade

Metal Cutting blade is perfect for making straight and curved cuts in soft, thin sheet metals. Pin-end design allows easy, tool-free blade changes.

What's in the box?

MS50 Side Cutting Blade

MS51 Wood & Plastic Blades

MS52 Fine Wood Blades

MS53 Metal Blade

Attachments

Vacuum Adapter

Product description

The BORA Speedhorse is the ultimate upgrade for your job site, workspace, or workshop. Pro carpenters, woodworkers, and contractors everywhere can rely on the fast setup and easy teardown of the Speedhorse. Simply deploy the legs with the touch of a button and set up is complete, making it 30 times faster than other brands on the market. With no assembly required, it is are ready to use right out of the box. The legs fold up (in any order) into the metal beam, allowing for easy storage and convenient transport. It also has a handle that makes it even easier to grab and go. The pre-drilled metal top allows you to screw in 2 x 4’s for a sacrificial top.

• SET-UP IN 1.6 SECONDS: The Bora Speedhorse is the only sawhorse on the market with lever quick-release deploy technology, offering instant setup and teardown that is 30x faster than conventional sawhorses
• BEST-IN-CLASS CAPACITY: These sawhorses can support up to 1500 lbs each, which means a hefty 3000 lbs together! This is 200 lbs. more than the leading competitors. A working height of 30 inches tall puts your project within easy reach. Come ready to out of the box with no assembly is needed to use.
• FAST TEAR DOWN: To tear down your worksite, just pull the levers on each end and fold the legs up. Unlike standard sawhorses, these have non-sequential legs, so It doesn't matter which leg is folded first.
• LONGER, PRE-DRILLED TOP: The pre-drilled metal top allows you to screw in 2x4's as makeshift brackets to a worktop. This prolongs the life of your equipment and protects it from damage. The extra-long length of 45 inches provides maximum stability.
• AWARD WINNING SAW HORSE: The Bora Portamate Speedhorse is Winner of the 2019 Pro Tool Innovation Award in the Sawhorses & Tables category. Buy the best and add it to your cart now!
• TWO PACK: Set of 2 Speedhorse Sawhorses to get you setup with the best work support on the job.

User questions & answers

Question:	How do you "rip" cut wood boards in half length wise without cutting into the sawhorses using a circular mini saw? what's the best technique/tool
Answer:	I lay a 3/4 in thick plywood over the 2 horses. Then I put 2 boards (even 2 x 4) as a spacer to raise up your board that you are cutting. I use a straight edge to make sure my cut is straight. Clamp the board down that you want to cut......this way the sawblade will go thru the board you are working on, but not thru the board over the sawhorse or the sawhorse itself.
Question:	Any reason to buy these over the toughbuilt brand? They are quite a bit cheaper, and the legs look a little sturdier. Advantages/disadvantages
Answer:	Only $20 cheaper for the toughbuilt. The toughbuilt have to be manually opened, and can only be closed in one order. The bora opens with one hand/one switch, and it doesn't matter which legs you close first.
Question:	When used with another unit, how far apart are the 2x4's when 2 are placed in the slots in the end
Answer:	The spacing of the 2x4 slots is 41.5”
Question:	How stable are these-i've used the toughbuilt brand and they seem to rock around alot
Answer:	Not stable. They have a decent front-to-back sway. Caught me by surprise when I got them out of the box. Similar observation by others on YouTube.

Product features

Instant Set-Up Bora Speedhorse

The Bora Portamate PM-4500 Speedhorse is the ultimate upgrade for your job site, workspace, or workshop. Shave precious time off site setup and tear down so you can get to work faster and complete jobs more efficiently. The Speedhorse deploys 30x faster than conventional sawhorses — just pull the release button in the middle of the frame and you are ready to go!

Instant set-up saves you valuable time on every project!

The Bora Speedhorse sets up 30x faster than conventional sawhorses. Simply release the legs with the lever and in 1.6 seconds you are ready to begin working.

Instant Set Up

Time is never an issue when you are using the Bora Speedhorse as your work support stand. All you need to do is enable the quick-release legs and in about one second you are ready to start!

Flexible Workspaces

Having flexibility on the job site is key to working efficiently. Speedhorse lets you set up quickly and doesn't slow you down when you need to move!

Incomparable Weight Capacity

The Bora Speedhorse is best in show for its weight capacity. It leads the race with a capacity of 1500 lbs, 200 lbs more than it's leading competitors. That means that with a pair of sawhorses you can support an incredible 3,000 lbs!

Versatile

The Speedhorse allows you to get your job done fast. Setup and tear down are a breeze and the units can be adapted for use as a work table or the tried and true sawhorse.

TIme Saver

Longer, pre-drilled top — More length means more stability. The pre-drilled metal top allows you to screw in a 2x4 as a sacrificial top, saving your equipment from damage.

Non-Sequential Leg Folding

Save time setting up and tearing down! The non-sequential leg folding means you can fold the legs up in any order. No more wasted time figuring out which leg folds first.

Long LIfe

The pre-drilled metal top allows for a 2x4 to be added as a makeshift top. This will increase the life of your Speedhorse be protecting the metal top against regular wear and tear. Adding a sacrificial board also protects your cutting tools to minimize the chance that they will hit the metal frame.

2x Material Slots

Speedhorse comes standard with 2x material slots on each end of the beam. Drop your boards in each slot to connect two Speedhorses. This enables you to create work tables that get the job done!

• 2021 New Release Promotion➤➤🎁Ideal gift choice🎁 🔥Perfect tool stand for home project🔥
• ☘【MULTI-FUNCTION WORK TABLE & FIXED TOOLS】-Tacklife saw stand is designed to accommodate any power tools, such as miter saw, band saw, table saw, scroll saw and ect.. And the power tool stand can be used as a large work table surface for cutting, sanding, painting, and any others. Besides, there are many holes on the table surface to fix the machines.
• ☘【6-LEVEL HEIGHT ADJUSTMENT & SUPPORT 500LB】-Tacklife saw stand is designed with 6-level height adjustment up to 36-1/5'' (MAX HEIGHT). And there is a roller on each side, which is also able to increase the height of 5''. Tacklife power tool stand can withstand up to 500 pounds with the anti-rust coating & durable iron skeleton frame.
• ☘【ROLLER & END STOPS】-The rollers at both ends of the stand can reduce the friction when sliding the cutting material, and the End stops can help you fix the cut material.And can be fixed at any position to suit the length of the cut material. In addition, tacklife power tool stand also can be used as the measuring tools, which can cut the same length when using the end stops on the same position.
• ☘【FODING & EASY TO CARRY】- Tacklife saw stand can be quickly assembled and folded without any tools. Weighing just 36.6 pounds, it can be carried around the workplace effortlessly. The folding size is 30.31 inches x 21.26 inches x 6.69 inches, which can be stored in the back of the car or the cabinet.
• ☘【QUICK INSTALLATION & NON-SLIPPING FEET】- Tacklife saw stand converts in seconds with collapsible legs. There are some detends that pressing them could lock/ unlock for a quick and easy set-up. What’s more, rubber reinforced feet prevent slipping while working.

User questions & answers

Question:	What is the folding size of the miter saw stand
Answer:	There are no screws, there are levers on both sides that lift and push down to that 1/3 sheet of sand paper can be fitted. Or you can get the sandpaper with velcro that just stick to the pad.
Question:	How much the saw stand can support
Answer:	Do you mean the sandpaper itself? I buy packages of sandpaper (Lowes, Home Depot, Auto stores) and cut the sheets to the width required. This Wen uses 1/3 of a sheet. There was an odd attachment composed of a precut sheet with plastic attached that I assume is a template for sizing your cuts. I ignored it.
Question:	Will a reyleo 12” miter saw work with this stand
Answer:	My husband uses regular sheets of sand paper cut in thirds to fit sander. Then they just clip on the bottom of sander.
Question:	Are the legs removable? I want to mount it to a cart
Answer:	You can use regular sheets of sandpaper. Cut them into three pieces and they will work. The mechanism holding the paper in place is pretty flimsy and paper often slips out. But it does work.

Product features

TACKLIFE MULTI-FUNCTION SAW STAND

- Uses: can be widely applied to various saws like miter saw, band saw, table saw, scroll saw and more.

- If you have the demand to adjust the height, Tacklife saw stand is designed with 6-level height adjustment up to 36-1/5'' (MAX HEIGHT).

- If you have the demand to cut materials of the same length, there is roller & end stops on both sides of the Tacklife miter saw stand, used as the measuring tools.

- If you have the demand to store it in a limited place, the multi function saw stand can be folded and carried to anywhere.

- If you have the demand to put some heavy materials on it, please don't worry, the power tool stand can support 500Lbs.

- If you have the demand to cut huge materials or put a huge machine on it , there is a large work table for you (23-3/5'' * 22-1/20'').

The INSTALLATION STEPS of TACKLIFE SAW STAND

Extension

Tacklife power tool stand can extend the length up to 67-1/3'' and the roller can be up to 5'' to adjust the materials' position and add the height up to 32-1/4''.

Fixed the saws

There are many holes on the multi-function saw stands to fix various saws and reduce the vibration.

Fold the Power Tool Stand

Tacklife miter saw stand can be fold and the folding size is 30-1/3'' x 21-1/4'' x 6-7/10'' .

Band Saw on the Saw Stand

Miter Saw on the Saw Stand

Table Saw on the Saw Stand

Product description

Remember when you could make intricate and artful cuts? Let the good times scroll with the WEN 16-Inch Variable Speed Scroll Saw. The 9/16-inch stroke saws through hard woods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16. 25-by-10-inch table bevels up to 45 degrees for angled cuts. The adjustable air pump clears saw dust from your work area to give you a clear line of vision. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. There’s no need to fret about blade changes - the included blade holder accepts pinned, pinless, and spiral blades while the unique side panel swings open for easy access to the bottom blade holder. This package includes one 15 TPI pinned blade, one 18 TPI pinned blade, and one 18 TPI pinless blade. And because its a WEN product, your scroll saw comes backed by a two-year , a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.

• Unique side panel flips open for easy-access blade changes
• Variable speed goes from 550 to 1600 strokes per minute
• Spacious 16-by-10-inch table bevels up to 45 degrees for angled cuts
• Cuts wood up to 2 inches thick with a 16-inch throat depth
• Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a dust port, a foot lock clamp, and three 5-inch blades

User questions & answers

Question:	How well would this do with cutting corrugated plastic a.k.a coroplast
Answer:	Honestly probably pretty well. I use mine to cut everything from 1/8 inch plexiglass, to 2x4’s with out a problem. Not a bad little machine honestly. When cutting something such a 2x4 blades wear out pretty quick but with the thin stuff they last awhile.
Question:	What is the actual size of the saw
Answer:	26-3/8" x 13" x 14-3/4"
Question:	Have a new 3922 scroll saw. Upper and lower pinless blade holders wont pinch together to hold the blades. Wen are you going to back up your saw
Answer:	You have to make sure they are the correct length and it does take some work getting them in properly. It too two people to load mine.
Question:	what is the difference between the 3921 and
Answer:	These two units are almost identical. The only differences are that the 3921 includes a flexible work light and a blade storage compartment on the side, while 3922 features a special side panel that folds open for easy clean up and blade changes. Also, the 3921 uses the two-direction adapter system for holding blades (better for pinned blades), while the 3922 uses a standard blade holding system (better for pinless blades).

Product features

Accurate and Sharp

This precision scroll saw by WEN can seamlessly cut through materials, displaying top performance. With utmost accuracy, you will be able to experience the sharpest and fastest blades with the WEN 3922 16-inch Variable Speed Scroll Saw

Ideal for Detailed Cuts

If you want to cut materials like hard wood, the WEN 3922 16-inch Variable Speed Scroll Saw is ideal for DIY applications. The adjustable air pump clears saw dust from your work area to give you a clear line of vision. A unique side panel flips open for easy-access blade changes with this scroll saw.

Product description

The POWERTEC UT1002 Universal tool stand with split MDF top is perfect for using a vast array of smaller, compact bench-top machines, power tools and accessories. Constructed of heavy gauge steel with an expandable 14" By 25" Split MDF top to accommodate a wide variety of different sized tools. This stand has a load capacity of 500 lbs. And a storage shelf below, features adjustable non-skid foot pads and an adjustable foot for stabilizing on uneven surfaces.

• INCLUDES: Universal Power Tool Stand
• APPLICATION: Ideal for supporting a variety of smaller, compact bench-top machines, power tools and accessories, while giving you a sturdy, yet small and dependable work surface
• FEATURES: 500 pound load capacity to accommodate a wide assortment of tools and equipment, adjustable foot pad for stability and a heavy gauge metal base powder coat finish for long-term durability
• NON-MARRING: Equipped with rubber feet that not only reduce equipment vibration, but they offer an anti-slip, skid free and non-abrasive profile that protects your floor for scuffs and scrapes. IMPORTANT: The UT1002 Universal Tool Stand is not designed to be used with casters as it destabilizes the stand. Adding casters will void the warranty on this product.
• DIMENSIONS: 32-Inch working height. 18" x 27" storage shelf, 14” x 25” expandable MDF split top with ruled surface (expands to 20”x25”)

User questions & answers

Question:	Can i use this as a anvil stand
Answer:	I probably wouldn’t. I use mine for a table top scroll saw that’s about 50 pounds. I just think between an anvils weight and the constant pounding, the stand might give.
Question:	Where do we install the spare washer on the sliding table top
Answer:	I do not understand what you mean by sliding table top. My is secured.
Question:	How big of a drill press will this hold
Answer:	The footprint can be as large as the top shelf or if you need it bigger than you can add another top shelf on top of existing or to replace it which is what I did to enlarge the surface of the top shelf. If by big you mean weight then I can't really help other than to say I have a pretty hefty saw affixed to the stand and the legs haven't buckled yet.
Question:	I ordered this and I would like some suggestions on hardware, what size hex head bolts/nuts. I'm going with 3/4 plywood on top, thanks
Answer:	I countersunk relatively small Phillips head nuts and bolts that I had around the house to make the surface flat. No need to tie it down with hex head bolts since all you want to do is stop it from slipping. The weight of whatever you put on top will hold it down.

Product features

The Universal Tool Stand by POWERTEC.

The POWERTEC UT1002 Universal Tool Stand is designed to provide you with a solid, sturdy and versatile working surface that offers flexibility for many of your day-to-day applications. It’s the perfect support option for your bandsaws, disc sanders, drill presses, planers, and other bench-top tools.

500lb. Weight Capacity

Featuring a portable and lightweight design, this tool stand flaunts an impressive 500lb capacity – effectively able to support many of your benchtop tools, powertool supplies and woodworking accessories.

Expandable MDF Split Top with Ruled Surface: 14” x 25”, expands to 20” x 25”

One Adjustable Foot

Hardware is supplied to make one of the feet adjustable.

Insert the screw head into the pad, and thread the nut onto the screw. Assemble the foot, flat washer and nut inset.

• THE SPECIFICATIONS ➤1.2Amp Pure copper motor, 16 Inches Scroll Saw, Variable speed goes from 500 to 1700 SPM. Variable speed options, large-size worktable, and pure copper motor power are enough to cut various types of wood.
• FOOT SWITCH & GRINDER ➤Besides ordinary switches, TACKLIFE scroll saw also has a footswitch, which can freely control the speed during cutting and sanding work. The scroll saw with a sander is equipped with 31 sanding accessories for the final step of making great artwork. The variable speed of the grinder goes from 2400 to 4500 RPM.
• 45° BEVEL CUTTING ➤Spacious 16-by-10-inch table bevels up to 45 degrees for angled cuts. The cutting depth of the table at 90° is 2.2 inches, and the cutting depth of the table at 45° is 1 inch.
• MULTIFUNCTION ➤Tool-free blade changes, a cast iron base, an air pump, a LED light, a dust port, a footswitch, flexible shaft grinder, onboard storage, and four blades. All these functions are just for you to have a better cutting experience.
• WARM PROMPT ➤For the better user experience, when using the electric grinder function, please fix the scroll saw on the stand before using, to prevent the running saw from causing danger. Please wear working headphones to reduce the working noise.

User questions & answers

Question:	Does this saw come with the stand
Answer:	No it does not come with a stand. You have to buy one or make one your self.
Question:	how heavy is the machine
Answer:	It is 13800g.
Question:	Is the base Metal or Plastic, it looks like plastic
Answer:	It seems to be cast metal.
Question:	How loud is it competing to other devices
Answer:	Very similar, not especially loud or quiet

Product features

TACKLIFE -The Future of Tools.

At TACKLIFE, we aim to create the best products that inspire our consumers to live a more convenient, secure lifestyle. We have our professional products monitoring team to focus on every single detail that matters to you and develop well-made, portable, exquisite products. As important as the high quality of products, is our attractive design. We always lead the path of similar companies to provide you with all the convenience at a revolutionary quality.

BLADE VARIETY

TACKLIFE 16-inch Variable Speed Scroll Saw equipped with two pinned blades and two pinless blades to prevent accidental damage to the blade.

FOOT SWITCH

When need two hands to move the wood, the footswitch may become an indispensable tool. Then the cutting speed can be controlled at will.

LED WORKLIGHT

The flexible work light can be adjusted and moved to illuminate workpieces from several angles.

DUST PORT

The universal dust port is suitable for vacuum cleaners in the homes of most woodworking enthusiasts and can vacuum efficiently.

WORKTABLE SIZE

16.3*10.0 inches worktable can put a larger size of wood, and also easy to move wood when cutting.

AIR PUMP & BLADE PROTECTION

We could see the cutting line more clearly after the air pump blew away the dust;

The blade protection can protect the saw blade and extend its service life.

Product description

The Worx Bladerunner Portable Tabletop Saw is really a table saw that you can take anywhere. Most table saws are enormous and can take up an entire dedicated table in your workshop—and forget taking them out of the workshop and to the job site. But the Bladerunner is made to give you the power of a much larger saw in a form-factor that makes it much more flexible. The rack and pinion fence system enables smooth and accurate cuts. And despite its smaller footprint (15-3/4” x 17”), the Bladerunner easily handles larger shelving and trim materials. It’s the ultimate DIY machine because you can take it anywhere around the house, so flooring, cabinets, racks, and railing projects are all accomplished much easier. Plus, it’s simple to use. This design allows you to keep both hands free, so you can fully adjust the material as you need to. The quick, tool-free blade change system is compatible with any 4” t-shank jigsaw blade. And the base provides on-board storage for its miter gauge, rip fence, and blades. With a stroke length of ¾” and a no-load speed of 3000/min you’ll have more than enough capacity and power to tackle jobs both big and small. Stop bringing projects to your table saw and start bring the Bladerunner to your projects.

• [GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts
• [TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site
• [ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between
• [SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts
• [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last
• [ACCESSORIES INCLUDED] 5 blades (woods, aluminum, scrolling, ceramic tile, steel) rip fence, miter gauge, dust extraction port, and blade grip

User questions & answers

Question:	will this work on vinyl fence posts, 5x5? need to create some sleeves by cutting vinyl fence posts
Answer:	No, the 735 has 13" blades, the 734 has 12 1/2" blades. Locating holes are spaced differently
Question:	can the feet lock in place
Answer:	Yes
Question:	blade is not straight in holder, tried new blades, same issue,, any ideas
Answer:	Approximately 29.5"
Question:	is it variable speed scroll saw
Answer:	The stand is definitely strong enough. With the rollers on the stand it is 30 inches tall. I have a heavy duty drill press that is 41 inches tall. I have it on a 28 inch stand and it is a perfect height for me. I use this stand for my planer and the stand is very well built for this application also. The stand top is wood so you would be able to drill mounting holes for your drill press.

Product features

Portable, Adjustable and Accurate

Featuring a rack and pinion fence system, the WORX WX572L BladeRunner x2 Portable Tabletop Saw makes smooth and accurate cuts. This power tool easily cuts a variety of larger shelving and trim materials. Being portable, this table can be carried anywhere around the workstation. This tabletop saw also comes with a traditional guard and riving knife system allows unlimited capacity for cross and rip cuts.

Ideal for DIY and Home Improvement Projects

No matter what you are installing around your house, wooden flooring, cabinets, racks, railings and more, the WORX WX572L BladeRunner x2 Portable Tabletop Saw is lightweight and compact, making it easy to carry anywhere and set up in seconds, to cut wood, tile, plastic, metal and aluminum with ease.

Superior Quality and Durability

This power tool by WORX is pack with a variety of features including a safety switch that prevents accidental starts, a miter gauge, rip fence, multiple blades for different materials and much more. Simple and effective, the WORX WX572L BladeRunner x2 Portable Tabletop Saw is simple to assemble and work with.

Product description

ORBITAL JIG SAW 5.0 AMPS - Stanley Black & Decker is a world-leading provider of tools and storage, commercial electronic security and engineered fastening systems, with unique growth platforms and a track record of sustained profitable growth. Included Components: BDEJS600C Jigsaw, Jigsaw Blade; Stroke Length: 3/4 in; Stokes per Minute: 3 000 spm; Tool Weight: 4.6 lbs

• Curve Control technology which allows you to adjust the saw's orbit in 1 of 4 customized settings
• 5 Amp variable-speed motor; up to 3,000 SPM of cutting power
• Can make 45 degree bevel cuts; with adjustable shoe for stability
• New and improved Wire Guard
• Dust blower
• New and improved Wire Guard for more precise cuts
• Keyless blade clamp for tool-free blade change

User questions & answers

Question:	Can you cut nails off of pallets
Answer:	Yes you can. Use a fine blade and put duc tape on both sides of the glass mark your line on the tape then cut
Question:	Will this be strong/accurate enough to cut the shape of a knife handled through a 2"x 10" x 1/2 inch think hard blog of jeans and fiberglass resin
Answer:	Yes. The harder you pull on the trigger the faster it goes.
Question:	does this come with blades, what is recommended
Answer:	Hi, Thank you for getting in touch! It is to inform you that it can cut nails but you may want to purchase appropriate blades for cutting metal. I hope this information addresses your needs. We look forward to welcoming you as our customer. Yours Sincerely, Sarfraz Customer Support Representative Tempus & Co.
Question:	What blade type/model can you use? Is there a specific blade made for this jigsaw
Answer:	The "orbital" refers to the circular motion of the blade. It moves up and down (as if on a y-axis) and also forward and backward (as if on the x-axis). The forward/backward motion is very slight compared to the up/down motion. It makes the cut more aggressive and a lot faster. Breaking down 2x4's goes very quickly. However, you can set the orbital motion from min to max, so this is very adjustable and this saw can still make very accurate cuts with the right blades.

Product description

Double parallel link arm design dramatically reduces vibration and noise, for extremely accurate cuts. Exclusive tool-free blade clamps, On-off switch, electronic variable speed, flexible dust blower and blade-tensioning lever are all located on the front upper arm. Arm design pivots from the back of the saw to the front and lifts so blade can be easily threaded through the material for inside cuts. Unique arm design keeps the blade perpendicular to the work. Oversized, cast-iron table provides excellent material support and bevels 45 degrees left and right. Specs: Motor 1.3 amp rating, 120V AC. 400-1,750 cutting strokes per minute. Table size 16" x 23-3/4". Weighs 56 lbs. Meets OSHA standards, CSA approved and U.L. Listed. Stand Not Included . Featured length of the flexible shaft is approximately 22 inches long

The dependable DEWALT 20-Inch Variable-Speed Scroll Saw is designed to help you create accurate, detailed workpieces with ease. Its user-friendly configuration with easy-to-access controls, reduced-vibration design, and variable-speed performance allow for incredible precision. For added convenience and durability, an integrated cast-iron table provides material support, and a flexible dust blower helps keep your work area pristine.

Unique Arm Design for Accurate Cuts

A scroll saw needs to perform both reliably and accurately, whether you're crafting custom jigsaw puzzles or designing unique trim pieces. This DEWALT scroll saw's double parallel-link arm design helps it deliver on both fronts by reducing vibration. The specially designed arm pivots from the back of the saw to the front, shortening the distance that the arm needs to move and allowing for smoother, quieter saw operation. With less vibration, you can produce accurate cuts with ease.

This unique arm design also works to keep the saw's blade perpendicular to whatever you're working on, reducing the chance of over cutting or under cutting.

Easy to Handle with Variable-Speed Control

Adding to the saw's intuitive, design are convenient controls engineered by DEWALT to keep your workflow smooth. The saw's on-off switch, speed control, and blade-tensioning lever are all located within easy reach on the front, upper arm. The saw's flexible dust blower is also located on this portion of the arm so it can easily be directed where you need it, keeping your work surface clear of unwanted debris.

The scroll saw's electronic variable-speed control allows you to make quick, accurate adjustments and utilize speeds ranging from 400 to 1,750 strokes per minute. The saw relies on a dependable 1.3 Amp motor for the power you need and delivers a variable stroke length between 3/4 inch and up to 2 inches deep. This application-specific performance translates to improved control and cleaner results.

Save Time with Tool-Free Blade Changes and Adjustable Table

Whether you're working with a variety of specialty materials or you're simply ready for a more aggressive cut, the DEWALT exclusive, tool-free blade clamps allow you to complete blade changes in just seconds. And the arm is easy to lift, making it easy to thread the blade through materials when making inside cuts.

Weighing 56 pounds, this scroll saw has a heavy-duty feel yet is small enough to move around the shop easily. The saw's oversized, cast-iron table provides excellent support no matter what you're working on, and the table bevels 45 degrees to the left and 45 degrees to the right for added versatility.

This 20-inch variable-speed scroll saw comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DEWALT 20-Inch Variable-Speed Scroll Saw, hex wrench, and blades.

• Double parallel link arm design dramatically reduces vibration and noise for extremely accurate cuts
• Exclusive tool free blade clamps allow blade changes in seconds. Depth of Cut (inches): 2 inch
• On off switch, electronic variable speed, flexible dust blower, and blade tensioning lever all located on front upper arm
• Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation
• Arm lifts so blade can be easily threaded through the material for inside cuts

User questions & answers

Question:	Does this saw come with the stand
Answer:	no stand comes with the saw check out harbor freight thats where i purchased my stand and light for about $75which work very well but i did have to use a 2x12 board to mount to the stand.
Question:	How thick of a hardwood piece can this cut with ease
Answer:	The thickest that I have cut is about an inch and a quarter hardwood, had no problem, I believe you could even thicker if you took your time and not push it real hard and use sharp blades! Hope this helps !!
Question:	Has anyone used this saw for pinewood derby cars? Is it powerful enough
Answer:	I would say no. This saw is designed for small flat wood. To cut out pinewood derby cars I would suggest a nice bandsaw.
Question:	How can I tell if my 788 is made in Canada or in Asia
Answer:	Your can contact DeWalt at 1 800 433 9258DeWalt is now a popular brand of tools for commercial contractors. In 2002, DeWalt ceased all tool manufacturing in the USA and moved manufacturing to China, Mexico, Thailand, Japan and Korea. In 2004, Black and Decker bought rival power tool manufacturer Porter-Cable and combined it with DeWalt in Jackson, Tennessee.

Product features

DEWALT DW788 1.3 Amp 20-Inch Variable-Speed Scroll Saw

The DW788 20" Variable-Speed Scroll Saw operates quietly and smoothly for accuracy. The tool-free blade clamp allows for quick and easy blade changes. Convenient placement on the liftable arm of the dust blower, power switch, and saw adjustments on the front of the upper arm provide for easy adjustment. Oversized, cast-iron table provides excellent material support and has the ability to bevel to both the left and right.

Product description

After nearly 90 years of expertise in the woodworking business, DELTA Power Equipment Corporation (DELTA PEC) has become one of the most revered brands in woodworking tools today. DELTA Power Equipment Corporation focuses on innovations to help the woodworker create masterpieces easier and with more precision. The company designs, manufactures and distributes a variety of stationary woodworking tools including electric table saws, band saws, radial arm saws, scroll saws, drilling machines, jointers, planers, mortisers, lathes, grinders and dust collectors for the professional and advanced woodworking markets.

Motor: 1.3 Amp



Speeds: 400-1,750 SPM



Capacity: 20 in.



Stroke Length: 3/4 in.



Table Size: 16 in. x 24 in.



Table Tilt: 0°-45°, Left and Right



Cutting Capacities: at 90°: 2 1/8 in. at 45°: 1 5/8 in.



Assembled Depth: 39 in.



Assembled Width: 16 in.

• Electronic variable speed can be adjusted from 400-1,750 SPM for a wide array of cutting applications
• Dual parallel link arm design reduces vibration reducing over and under cutting improving accuracy and quality
• Upper arm lifts and locks in the raised position during blade changes or while adjusting blade position for fret work
• Tool-free blade clamp allows for quick, easy blade changes in seconds. Bevels 0° - 45° left and right. Motor: 1.3 Amp
• On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever are all conveniently located up front on the arm for easy accessibility
• On-tool blade storage area provides neat, organized protection for scroll saw blades, includes 2 straight blades

User questions & answers

Question:	Does this saw come with a stand
Answer:	NO! Even though Delta and DeWalt are very similar, The DeWalt stand has to be adapted to fit the Delta saw. Takes a few minutes.
Question:	What is the 'thing' on left side? How easy to change blade, need a tool? Disappointed no light, any available
Answer:	That black tube thing on the left is an adjustable hose that blows puffs of air (generated I think from the up and down motion of the upper arm) which will help keep your lines clear of sawdust. Changing blades is a snap, simply loosen the thumb / wing screw on the top arm and the lower holder and slide out the blade. As for the light, I make due with a shop lamp that I have hanging from the ceiling of my garage. You can check woodcraft or rockler for magnetic portable lamps that may stick to the saw somewhere - not sure if its magnetic everywhere, never tried
Question:	The saw is great but I can not get the hold down to stay in place. I move the wood and it also moves. Any thoughts
Answer:	I removed mine even though it held just fine as I found that it got in my way. This was after I'd gotten used to the saw and the forces involved. I haven't had an issue using it without the hold down, but you have to do the holding down.
Question:	There's such a price difference, what's the main difference between this saw and the dewalt dw
Answer:	Only difference is some of the outside sheet metal, the inner workings are the same. You are paying for the Dewalt name. They both used to owned by the same company.

Product features

LOW VIBRATION, HEAVY DUTY CONSTRUCTION

The Dual parallel-link arm reduces vibration and noise. Keeping the blade perpendicular to the work surface Dramatically reducing over or under cutting, improving accuracy and cut quality. This low vibration scroll saw improves user sensitivity allowing you to make more precision cuts

LOW VIBRATION & BUILT TO LAST

The Dual parallel-link arm reduces vibration and noise. Keeping the blade perpendicular to the work surface Dramatically reducing over or under cutting, improving accuracy and cut quality. This low vibration scroll saw improves user sensitivity allowing you to make more precision cuts

LOADED WITH FEATURES

Electronic variable speed can be adjusted from 400-1,750 SPM providing you ultimate control. The upper arm lifts and locks in the raised position during blade changes or while adjusting the blade position for fret work. On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever are all conveniently located up front on the arm for easy accessibility, while the tool-free blade tensioning allows for quickly adjusting the blade to the proper tension which maximizes blade life and accuracy

LOADED WITH FEATURES

Electronic variable speed can be adjusted from 400-1,750 SPM providing you ultimate control. The upper arm lifts and locks in the raised position during blade changes or while adjusting the blade position for fret work. · On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever are all conveniently located up front on the arm for easy accessibility, while the tool-free blade tensioning allows for quickly adjusting the blade to the proper tension which maximizes blade life and accuracy

ENORMOUS CAPACITY

Huge 20 inch x 2-1/8 inch Capacity with a 24 inch x 16 inch table allow you to handle the large projects. A 3/4 inch stroke allows this saw to cut aggressively for those nice clean cuts.

HUGE CAPACITY

Huge 20 inch x 2-1/8 inch Capacity with a 24 inch x 16 inch table allow you to handle the large projects. A 3/4 inch stroke allows this saw to cut aggressively for those nice clean cuts.

AND MUCH MORE

Product description

Remember when you had a saw that was both compact and powerful? The WEN 9-Inch Benchtop Band Saw attacks boards with cuts up to 3-1/2 inches deep and 9 inches wide. The 2.5-amp motor rotates the included 1/4-inch blade at up to 2500 feet per minute. The design of this saw uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in width for both intricate and powerful cuts. The spacious work table measures in at 12-1/4 x 11-7/8 inches in size and can be beveled up to 45 degrees. This package includes a miter gauge, an onboard 2-1/2 inch dust port, a fence for creating straight cuts, and an adjustable blade guard. Ball-bearings give the blade smooth operation and a long lasting life for years of dependable service. And because it’s a WEN product, your WEN 9-Inch Benchtop Band Saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly and helpful customer phone line all to make sure you remember WEN.

• 2.5 amp motor rotates the blade up to 2500 feet per minute
• Create cuts up to 3-1/2 inches deep and 9 inches wide
• Uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in size
• Spacious 12-1/4 x 11-7/8 inch work table bevels up to 45 degrees
• Includes a 1/4-inch-wide blade, a 2-1/2 inch dust port, a rip fence, a miter gauge and a two-year warranty

User questions & answers

Question:	What are the table dimensions
Answer:	The table is 12" by 12".
Question:	Can this cut schedule 40 stainless steel 304L pipes
Answer:	I wouldn't, the cuts wouldn't be that great and you would burn out the motor on the saw
Question:	will saw make sharp turns
Answer:	If you install a smaller blade it will turn almost as sharply as a scroll saw. I have a 1/4" blade and it can turn perhaps a 3/4" radius OK.
Question:	Do i need to purchase saw blades
Answer:	The saw ships with one wood blade. I purchased an extra finer tooth blade and a metal cutting blade. good to have an extra in case the one you are using breaks.