12 best spindle sander for router

Product description

Remember when you had to sand those rough edges by hand? With the WEN variable speed handheld oscillating spindle sander, easily smooth out arcs, curves, contours, odd shapes, straight edges, and more. The WEN variable speed handheld oscillating spindle sander features a smooth and powerful 5-Amp motor. The sanding spindle oscillates between 50 to 90 times per minute, with an RPM that can be set anywhere from 1800 to 3200 rotations per minute. Our package includes four sanding sleeve sizes (1/2 in., 3/4 in., 1 in., And 1-1/2 in.) and three rubber Drums (3/4 in., 1 in., And 1-1/2 in.), providing you a Spindle diameter to match whatever the situation requires. Quickly transform this unit into a benchtop spindle sander with the included Clamps and mounting pad. Simply place the unit upside down on the surface of your choice, and secure it into place for a reliable stationary sanding machine. The adjustable guide Plate provides a straight edge for consistent and reliable material removal. The 1-1/2-inch dust port attaches to the dust Collection system of your choice, helping to control sawdust and minimize cleanup. This unit is also compatible with the WEN 5932SPC replacement sanding sleeves. And because it's a WEN product, your portable spindle sander is also backed by a two-year warranty, a friendly and knowledgeable customer service hotline and a nationwide network of experienced service technicians. It's time to make any difficult sanding task a breeze. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.

• Lightweight and portable design allows for easy handheld sanding in hard-to-reach places
• Easily transform your portable handheld unit into a stationary benchtop spindle sander by clamping it to your workbench with the included mounting hardware
• Powerful 5-Amp variable speed motor provides anywhere from 1800 to 3200 rotations and 50 to 90 oscillations per minute with a 1/4-inch stroke
• Features four different sanding spindle diameters: 1/2 inch, 3/4 inch, 1 inch, and 1-1/2 inch spindles
• Includes four 80-grit sanding sleeves, three rubber drums, one non-marring rubber mounting pad, Two clamps, an adjustable Straight-edge guide Plate, an onboard 1-1/2-inch dust port, and a two year warranty

User questions & answers

Question:	Does it have the inserts that go around the smaller sleves (1/2") so you can stand smaller things or are smaller things going to fall into it
Answer:	There is a large 13mm washer that is assembled onto the shaft before the sanding sleeve that helps prevent any small work pieces from entering under the base plate. If you have any other questions don't hesitate to reach out to us at 1-847-429-9263 (M-F 8AM-5PM CST)
Question:	Could you use a 2" sanding sleeve with this sander
Answer:	No, I don't believe you can. The arbor is of a fixed height.
Question:	What kind of sandpaper are these, garnet? Aluminum oxide
Answer:	Aluminum oxide.
Question:	Does this sander use standard sanding sleaves
Answer:	No, it does not!! The sleeves that come with this sander are only 3" in length. Once again, someone answering a question without knowing what they are talking about. The WEN sanding sleeve kit Amazon recommends for this sander are the standard 4 1/2" long and are meant for the WEN sanding table...not this portable sander. I suppose you could cut them to 3", but the kit also includes 2 larger diameter sleeves that can't be used with this sander. Big Horn is the only manufacturer I can find on Amazon that makes 3" long sanding sleeves.

Product description

PackageInclude:

1 x 2.2KW Water-cooled spindle motor (ER20,220V,24000rpm,80x213mm,4 bearing)

Specification:

Material: Stainless Steel

Size: Φ 80x213mm(Middle body diameter:80mmxLength:213mm)

Power: 2.2KW

Voltage: 220VAC

Current: 8A

Frequency: 0-400Hz

Speed: 0-24000rpm

Cooling: Water-cooling

Accuracy: 0.003--0.005

Runout off: Less than 0.02mm

Bearing Lubrication: Grease

Collet Size: ER20

Bearings: 3 bearings(C7005x2 + C7002x2),P4 class, angular contact bearings

Main Application: Wood, Glass, PVC industry

• Bearing: 4PCS C7005x2 + C7002x2, 3pcs high quality bearings.
• Frequency: 400Hz; Runout off: Less than 0.02mm.The Spindle motor Mainly suitable for non-metallic engraving.
• This spindle only supports clockwise rotation, not reverse rotation. Notice: The spindle speed can't lower than 9000rpm !!!!
• ISO9001 quality certifications which means this item is the top quality item.
• In extremely high speed working environment, ordinary bearing can not ensure this high rotate speed for using for long time.

User questions & answers

Question:	Im thinking of buying this. but description says not to operate below 9000 rpm. what happens if the rpm was lower than 9000? will the motor burn out
Answer:	it's hard plastic
Question:	What is the minimum/lowest operating rpm, this spindle can run
Answer:	/Duration 0:05Loaded: 0.00%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:05 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } I have added a screen protector under this case and it's holding up quite well.
Question:	What size wrenches do I need for shaft and collet
Answer:	This case has no screen protector film, The advantages of this does not affect the touch screen, but still has a fantastic screen protection.
Question:	How does this compare to the Huanyang
Answer:	Theses case is just the bumper case, NOT with the screen protector, hope i can help you to solve your issue

Product description

Package include:

1 x High Quality 2.2KW Fuling Brand Inverter 220V





Parameter:

1) Input Voltage: 220V(+/-15%)

2) Output Voltage: 220V(+/-15%)

3) Input Frequency: 48-63 Hz

4) Output Frequency: 0-400 Hz

5) Input Phase:1 or 3 - phase

6) Output Phase: 3 phase

7) Warranty: 1 year from the date you purchased





English manual: https://drive.google.com/file/d/1zUeSDFqrVAnmrEIli6oR36GP0h2g7XG7/view?usp=sharing





If you want a 2.2KW air cooled spindle, we recommend this:https://www.amazon.com/dp/B0711XKJD1?ref=myi_title_dp

If you want a whole kit, we recommend this:https://www.amazon.com/dp/B07MD4LV1L?ref=myi_title_dp

• PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability.
• Easy PLC function can realize 16 legs of speed and inverter control function.
• Low output ratting torque 0.5HZ-150%, low speed running ability.
• Auto voltage regulation (AVR) technique, for ensuring the inverter load capability.
• With perfect error protection and short circuit starting protection capability.

User questions & answers

Question:	Where i can find the software of the fuling vfd dzb series to be able to upload/download parameters
Answer:	Hello, Thanks for reaching out to us! Yes the Norman Rockwell Pop-Up Christmas Advent Calendar is the same as the one from 2018. Let us know if you have any other questions

Product description

1 Piece of Variable speed wet polisher (110V, 1000W, 1000-4500 RPM Adjustable,side handle and d handle included. 3 Extra pairs of carbon brush included ). 1 Piece of B13 (13mm / 1/2") Diamond Roundover / Radius Bullnosee router bit. 1 Piece of 5" Diamond convex blade for granite marble concrete circle shape cutting. 1 Piece of 4" Diamond Turbo Row Grinding cup wheel. 9 Pieces of 4" Diamond polishing pad. 2 X Grit 50 100, 1 X Grit 200 400 800 1500 3000. 1 Piece of 4" professional glaze buff (to bring mirror like polished result to granite marble). 1 Piece of 4 Inch aluminum backer / pad holder.

• for stone concrete travertine repair
• wet or dry use
• work with wet or dry grinder / polisher (5/8"-11 Thread spindle)

Product description

Package include:



1 x Inverter 4KW VFD 220V(220V input and 220V output)

1 x English user manua



Notice:

If your motor is not 24000rpm,you need to change the drive parameters,then connect 3 phase motor,before you change the parameters,you need Factory Reset,then change PD013 to 8,then you can change the parameters.Thanks



Product Feature:

1)PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability;

2)Easy PLC function can realize 16 legs of speed and inverter control function;

3)With extremely strong anti-jamming capability

4)Low output ratting torque0.5HZ-150%, low speed running ability;

5)Carrier adjustable by 16KHZ, completely soundless working environment;

6)Broad voltage working area, normal running in 304V-456V;

7)Auto voltage regulation (AVR) technique, for ensuring the inverter load capability;

8)Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes;

9)With perfect error protection and short circuit starting protection capability;



Tech parameters:

1) Input Voltage: 220VAC(+/-15% )

2) Output Voltage: 220VAC

3) Input Frequency: 48-63 Hz

4) Output Frequency: 0-400 Hz

5) Input Phase: 1 phase

6) Output Phase: 3 phase

Product dimensions:

• Our Inverter ( VFD ), can be only used for 3 Phase motors ( 220V ), can't support Normal single motors.
• PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability. Low output ratting torque0.5HZ-150%, low speed running ability
• Easy PLC function can realize 16 legs of speed and inverter control function; Auto voltage regulation (AVR) technique, for ensuring the inverter load capability. With perfect error protection and short circuit starting protection capability.
• Our inverter is only suitable for CNC spindle motors, other motors are not suitable.

User questions & answers

Question:	Can you confirm that this will work for a 3ph 5 HP motor when using a 220v single phase input? Also is there a way to run a timed run operation
Answer:	It will damage the spindle motor.
Question:	does this have analog i/o control
Answer:	12000
Question:	does this have a brking effect for the spindle when stop is applied
Answer:	Use ER20-A type wrench
Question:	Single phase input
Answer:	Dear friend, first of all,thanks for your interested, if you said ,that is HuanYang brand Spindle motor, this spindle motor the quality more than HuanYang brand, you can buy one motor and test the quality, Kind regards Linda

Product description

Delta, 31-741, 5 Piece Drum 100 Grit Sleeve Sanding Kit (3/4", 1", 1-1/2" 2", 3") FOR B. O. S. S. Spindle Sander

• 5 Pc. Size Assortment: 3/4 in. , 1 in. , 1 1/2 in. , 2 in. , and 3 in.
• Includes Rubber replacement drum
• Fits DELTA SA350K B. O. S. S. Bench Oscillating Spindle Sander
• 100 Grit

Product description

Introducing the 4.5 Inch Sanding Sleeves Assortment by POWERTEC.

 

This spindle sander sleeves set was designed to give your surfaces the perfect shaping and finish they deserve.  Commonly used for sanding and polishing curves, material removal and resurfacing, these sander accessories work effectively on a wide variety of non-ferrous metal based and woodworking projects.   Constructed out of aluminum oxide, these high performance abrasive sleeves feature a superior quality grain that delivers precision and professional quality results.  This cost effective combo includes 6 120 grit sandpaper sanding sleeves in 6 different diameters to ensure you have exactly what you need in for perfect project craftsmanship in your workshop. 

 

COMPATIBILITY

• For use with most oscillating and spindle sanders.
• For best results and brand specific match, search Amazon for POWERTEC MODEL OS1400 & OS1000

 

POWERTEC is a US based manufacturer of high quality woodworking machines, wood work accessories, and a wide assortment of OEM replacement parts. We are committed to exceeding expectations, while bringing the best innovations, technologies, and product development to the industry.

• INCLUDES: Professional grade aluminum oxide (120 grit) sanding sleeves – Pack of 6, (1 of the following diameters: 1/2", 3/4", 1", 1-1/2", 2", 3")
• PERFECT FIT: These 4 ½ inch long spindle sander sleeves fit directly over the rubber sanding drum metal shaft
• PROFESSIONAL FINISH: Perfect oscillating sanders for woodworking projects, and used for sanding, resurfacing, abrading and polishing some metals and most soft and hard woods
• MADE TO LAST: Each sanding sleeve is carefully constructed from premium aluminum oxide to increase longevity and prevent loading
• COMPATIBILITY: Works with oscillating spindle sanders, including models from POWERTEC (item# OS1400, OS1000), Delta, Fox, ENLON, Rockwell, Grizzly, Jet, Ryobi, and Wen

User questions & answers

Question:	Will these fit the Ryobi spindle sander spindles
Answer:	they work fine on mine
Question:	Does anyone use these on a central machinery sander from Harbour Freight
Answer:	Do not have Harbor Freight ..... Just in case this might help .... I use mine on a Grizzly oscillating sander Model G0739.
Question:	will these sanding sleeves fit a craftsman model 351.215000 oscillating spindle sander
Answer:	I don't have or have ever used a craftsman model oss. Im sure it an excellent oss. However, I will say that im very confident that the sleeves are universal and will work on your model. I purchased an off brand locally for mine and they worked perfectly well. I think you will find this to be true for you as well. The sleeves are held by compressing the rubber drum, so the tolerance if close will work tightening more or less.
Question:	Will the sanding sleeves fit a ridig spindel sander
Answer:	yes that is what I am using it on

Product features

The 4.5 Inch Sanding Sleeves by POWERTEC

These spindle sander sleeves were designed to give your surfaces the perfect finish they deserve. Commonly used for sanding & polishing curves, material removal and resurfacing, these sander accessories work effectively on a wide variety of non-ferrous metal based and woodworking projects. Constructed out of aluminum oxide, these high performance abrasive sleeves feature a superior quality grain that delivers precision and professional quality results. This cost effective combo includes six 120 grit sandpaper sanding sleeves.

Product description

Introducing the 4.5 Inch Sanding Sleeves by POWERTEC.These spindle sander sleeves were designed to give your surfaces the perfect finish they deserve. Commonly used for sanding polishing curves, material removal and resurfacing, these sander accessories work effectively on a wide variety of non-ferrous metal based and woodworking projects. Constructed out of aluminum oxide, these high performance abrasive sleeves feature a superior quality grain that delivers precision and professional quality results. This cost effective combo includes three 120 grit sandpaper sanding sleeves.COMPATIBILITYFor use with most oscillating and spindle sanders.For best results and brand specific match, search Amazon for POWERTEC MODEL OS1400 OS1000POWERTEC is a US based manufacturer of high quality woodworking machines, wood work accessories, and a wide assortment of OEM replacement parts. We are committed to exceeding expectations, while bringing the best innovations, technologies, and product development to the industry.

• INCLUDES: Professional grade aluminum oxide (120 grit) sanding sleeves 4-1/2” x 1/2” Diameter – Pack of 3
• SIZE: These 4 ½ inch long spindle sander sleeves fit directly over the rubber sanding drum metal shaft
• PROFESSIONAL FINISH: Perfect oscillating sanders for woodworking projects, and used for sanding, resurfacing, abrading and polishing some metals and most soft and hard woods
• MADE TO LAST: Constructed from aluminum oxide to increase longevity and prevent loading
• COMPATIBILITY: Works with oscillating spindle sanders, including models from POWERTEC (item# OS1400, OS1000), Delta, Grizzly, Jet, Ryobi, and Wen

User questions & answers

Question:	what is the actual inside diameter of these sleeves
Answer:	yes, it has analog i/o control.
Question:	can I get this size in 80 grit
Answer:	It can be programmed that way go online and look up the part number they have a operating manual available shows you everything it is capable of doing.
Question:	can i use this on metal
Answer:	Yes, it is single-phase input.
Question:	does it fit a ridgit sander
Answer:	Dear Friend, you can download the manual from this link: https://drive.google.com/file/d/1zUeSDFqrVAnmrEIli6oR36GP0h2g7XG7/view?usp=sharing . Thank you!

Product features

POWERTEC 11210

• Length: 4-1/2-Inch
• Diameter: 1/2-inch
• Sanding Grit: 120
• Pack of 3

POWERTEC 11211

• Length: 4-1/2-Inch
• Diameter: 3/4-inch
• Sanding Grit: 120
• Pack of 3

POWERTEC 11212

• Length: 4-1/2-Inch
• Diameter: 1-inch
• Sanding Grit: 120
• Pack of 3

POWERTEC 11213

• Length: 4-1/2-Inch
• Diameter: 1-1/2-inch
• Sanding Grit: 120
• Pack of 3

POWERTEC 11214

• Length: 4-1/2-Inch
• Diameter: 2-inch
• Sanding Grit: 120
• Pack of 3

POWERTEC 11215

• Length: 4-1/2-Inch
• Diameter: 3-inch
• Sanding Grit: 120
• Pack of 3

Product description

Spindle sanders are essential for the polishing of rocks, smoothing of edges and cuts in wood, and contouring of irregular shapes for your projects. Whether you are a professional metalworker or have home woodwork projects, look to the ABN Sander Rubber Drum 5-Piece Kit. Simply insert these rubber sanding drums onto the 1.25-inch bit of your oscillating sander and place any grit of sandpaper around the rubber. These drums are constructed of durable yet flexible rubber that can withstand repeated, extended use. Sanding kit includes 5 rubber sleeves for your oscillating sander. Package includes rubber drum sizes 3/4-inch, 1-inch, 1-1/2-inch, 2-inch, 3-inch. Whether you are an artist, a carpenter, or a metalworker, look to this oscillating sander drums set to get the job done right. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• [Rubber Drum Spindles]: Whether you are a professional metalworker or have home woodwork projects, look to the ABN Spindle Sander Rubber Oscillating Spindle Sander Rubber Drum; Package does not include sander tool or sandpaper
• [For Your Projects]: Polishing rock, smoothing out edges and cuts in wood, and contouring irregular shapes has never been easier than with this drill press sanding drum kit as you slide your sandpaper sleeves onto these rubber drums
• [Built to Last]: Oscillating sander rubber drum will withstand extended and repeated use; Sanders are constructed of rubber to allow for little flexibility and ensure durability
• [Fits Your Tools]: Spindle sander rubber drums fit any 1.25 inch steel shanks for your tools; Rotary tools such as drill presses, spindle sandals, hand drills, and flexible shaft attachments fit sander rubber drum kit
• [Perfect Size]: Oscillating sander drum kit includes 5 rubber sleeves for your oscillating sander; Package includes rubber drum sizes 3/4-inch, 1-inch, 1-1/2-inch, 2-inch, 3-inch (1.9cm, 2.54cm, 3.81cm, 5.08cm, 7.62cm)

User questions & answers

Question:	will all of these fit a sears oscillating sander. I believe the shaft is 1/2" for all size sleeves
Answer:	Not at all. It's solid but not too heavy.
Question:	Will this fit a ridgit
Answer:	we have a polished version in our bars grate only. The tile version only comes in satin as you will only see about 1/4" of metal since the tile tray acts as the grate.
Question:	What is the length on these? I need 4 1/2" for my craftsman
Answer:	Don't be confused by the small holes in the top plate which holds the tile. The drain is a 2" waste pipe as shown in the first picture. It is so large you may want to consider getting this https://www.amazon.com/gp/product/B00AN8GZ1C/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1 to prevent hair clogs.
Question:	how tall are the drums
Answer:	Its an optional check valve used primarily outside the US. You can remove this piece completely and this should help with your flowrate.

Product description

Specifications:

Quantity: 20pcs

Weight: Approx. 910g 4pcs Rubber Drum Sizes Diameter Height Shank Diameter 1/2inch 64mm / 2.52inch 3mm / 0.12inch 3/4inch 64mm / 2.52inch 6mm / 0.24inch 1inch 64mm / 2.52inch 6mm / 0.24inch 1-1/2inch 64mm / 2.52inch 6mm / 0.24inch



Package Included:

1pcs x 1/2" Rubber Drum

1pcs x 3/4" Rubber Drum

1pcs x 1" Rubber Drum

1pcs x 1.5" Rubber Drum

2sets (8pcs) x Coarse Sleeves (80grit)

2sets (8pcs) x Fine Sleeves (120grit)

1 x Case



Note:

Only rubber drums, sanding sleeves and case, no other stuff included.

• ☀Self-expanding cushion is easy to install and designed to hug sleeves for a tight grip, keeping sanding paper in place for an extra fine finish
• ☀Standard size drums are common and compatible to use with rotary tools such as drill presses and hand power drills
• ☀It comes with strong storage case for quick access and protection
• ☀Quality construction built is long lasting, lightweight and durable for sanding holes, contouring edges, and buffing out irregular shapes
• ☀Ideal accessory for home improvement, hobbies, DIY, carpentry, wood working, and many more

User questions & answers

Question:	What are the lengths of the drums
Answer:	My balcony isn't in direct sunlight , but when the sun is on them not really.

Product description

At JET Tools, we see a future built on great brands, products, and people. In every facet of our business, we leverage the strengths of our global infrastructure to maximize the benefits of all three.

Featuring design improvements like a relocated and sealed on/off switch (to prevent dust infiltration), and shelves for storing your five complete spindles, the JET 708404 JBOS-5 5-1/2 Inch 1/2 HP Benchtop Oscillating Spindle Sander with Spindle Assortment, 110-Volt 1 Phase is a true powerhouse. Its tilting table, spindles with threaded ends, and robust induction motor tackle the toughest sanding projects with ease.

Oscillation Reduces Friction and Ensures Consistency

The JBOS-5 creates a one-inch oscillating action that reduces friction heat, thereby protecting your wood pieces and prolonging the life of the sleeve. Its main spindle support also runs on precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism for reliable, consistent performance job after job.

Additionally, the oscillation gears run in a sealed, lubricated box to prolong their life and durability.

Powerful Induction Motor for Reliable Performance

The JBOS-5 comes equipped with a powerful 1/2 HP induction motor that easily handles all your sanding projects. And thanks to the table inserts and a built-in, two-inch dust port, you won't have to worry about dust and debris falling into the motor and marring its performance, compromising your view of the workspace, or causing injuries and accidents.

Tilting Table for Bevel Sanding

To give you the flexibility to handle a variety of jobs and material sizes, the JBOS-5's table tilts to 45 degrees. This tilting ability also accommodates bevel sanding projects.

Safety Features for Smooth Operation

Designed for safe and smooth operation, the JBOS-5 boasts several innovative safety features. First, a removable on/off safety switch prevents accidental start-ups. There are also built-in storage racks to keep spindles and table inserts handy and within safe and easy reach. Finally, the benchtop includes four non-skid rubber feet to keep the machine stable during use.

Quick Spindle Changes and a Scratch-Free Finish

You can trust the JBOS-5 to deliver precise, quality results in less time. Spindles have threaded ends for quick, easy changes, and a one-inch spindle ensures a scratch-free finish.

The JBOS-5 measures 17 x 20.8 x 18.2 inches (WxHxL), weighs 82 pounds, and is covered by a five-year warranty.

About JET: A History of Sharing New, Feature-Rich Products

Opened in 1958 after the founder of the company, Leslie P. Sussman, took the first Boeing Jet Airplane trip from Seattle, Washington to Japan, JET began as a small dealer that sold air hoists and trolleys out of a single hardware store in Seattle. Over the years, JET has carried everything from snowmobiles, transmitter radios, and forklifts to nylon stockings, but by the early 1970s, metalworking had become the base of their business line. And by the 1980s, JET had expanded into the realm of woodworking. Today, you'll find that JET offers a wide range of popular woodworking tools that are backed with best-in-class features and excellent service.

What's in the Box

Complete 1/4-, 1/2-, 5/8-, 1-1/2 and two-inch spindle assemblies, two round table inserts, and two oblong table inserts.

From the Manufacturer

With a large cast-iron workspace and table that tilts to 45 degrees, this 1/2 hp sander can accommodate even the heaviest sanding project. The 1-inch spindle has an oscillating action that provides a scratch-free finish and prolongs the sleeve life. Other features include non-skid rubber feet to prevent movement while in use, removable safety switch, and a built-in dust port. Sander comes with 1/4-, 1/2-, and 5/8-inch spindles, 1-1/2-and 2-inch complete spindles, and two round and two oblong table inserts.

FEATURES

• Large cast iron workspace to handle all your projects Table tilts to 45 degrees handle all bevel sanding projects
• The 1" spindle oscillating action provides a scratch free finish and prolongs sleeve life
• Powerful 1/2 HP motor can accommodate even the heaviest sanding projects
• Four non-skid rubber feet prevent the machine from moving while in use
• Built in diameter of dust port to collect the dust before it becomes airborne
• Removable safety switch
• Oscillation gears are encased in a lubrication box to greatly prolong life and durability.

STANDARD EQUIPMENT

• Complete 1/4", 1/2", 5/8", 1-1/2" and 2" spindle assemblies
• 2 round table inserts
• 2 oblong table inserts

SPECIFICATIONS

Model: JBOS-5

Table Size (in): 14 1/2 x 14 1/2

Table Tilt (Down): 0 - 45 degrees

Spindle Speed (RPM): 1,725

Oscillations (per minute): 30

Length of Oscillations (in): 1

Motor (TEFC): 1/2 HP, 1Ph 110V

Net Weight (lbs): 77

• VERSATILITY: Table tilts up to 45°.
• LONG LIFE: 1" oscillating action protects wood, and prolongs sleeve life.
• EFFICIENCY: Spindles have threaded ends for fast, easy changes.
• CONVENIENCE: Built-in storage racks keep spindles and table inserts nearby.
• SAFETY: Removable on/off safety switch prevents accidental start-up.

User questions & answers

Question:	What is the maximum spindle diameter that can be fitted
Answer:	I believe a 3”. I am not sure if jet still offers a 3” spindle, but they did when I got mine. But I had to go to the jet web site. Good luck.
Question:	what's the foot print of this machine and how high is it
Answer:	Base bottom is 12" square, top plate is '19 high. It's a fine instrument and I enjoy using it.
Question:	If the sander spindle is 5 1/2" will the 6" sanding sleeve work on it
Answer:	On my Jet sander, the spindles and sleeves vary from 5-1/2 to 6". (The smaller diameter sleeves are the longer ones for some reason. ) I see no problem putting 6" sleeves on 5-1/2" spindles, and vice versa. I like this sander a lot, by the way.
Question:	Is the table cast iron
Answer:	Yes the table is cast iron with steel center inserts.

Product features

SPINDLE ASSEMBLIES AND SLEEVES

This sander includes five sanding spindles and sleeves (100 grit).

• 1/4" x 6"
• 1/2" x 6"
• 5/8 x 6"
• 1-1/2" x 5-1/2"
• 2" x 5-1/2"

TABLE INSERT PLATES

Four table inserts are provided, to prevent dust and debris from falling into the motor, and help protect operator.

• 3/4" Round
• 2" Round
• 3/4" Oblong
• 2" Oblong

LARGE 14-1/2” TILTING TABLE

Table tilts up to 45° to accommodate bevel sanding projects.

Product description

Remember when you used to have to sand those rounded edges by hand? With the WEN oscillating spindle sander you'll never have to face that problem again. This is the ultimate sanding tool for quickly and easily smoothing out arcs, curves, contours and odd shapes. The plates and drums are easy to swap in and out and the lightweight design allows for easy mobility if need be. However, just because the compact design weighs in at a mere 30 pounds does not mean that we've sacrificed power. The WEN oscillating spindle sander features a smooth and quiet 1/2HP 3.5 amp motor while the sanding spindle moves up to 58 oscillations and 2000 rotations per minute with a 5/8 inch stroke. Our package includes six sanding sleeve attachment sizes (1/2, 3/4, 1, 1-1/2, 2 and 3 inches) and five rubber Drums to allow for a full range of curves to match whatever the situation calls for. Meanwhile, the onboard storage keeps the spindles, sleeves, Table inserts and Spindle washers organized and accessible for Quick changes. The dust port provides the option to attach dust extractor to collect the airborne dust particles, ensuring a cleaner working surface and shop so you can keep building. And because it's a WEN product, Our oscillating spindle sander is also backed by a two-year warranty, a friendly and knowledgeable customer service hotline and a national network of experienced service technicians. It's time to make any difficult sanding task a breeze, allowing for maximum creativity with any woodworking project. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.

• Powerful 1/2 HP 3.5 amp motor provides 58 OPM and 2000 RPM
• Features onboard storage for all accessories along with a dust collection port for hooking in a dust extractor
• Attach the dust collector of your choice to the onboard dust port to minimize clean-up
• Backed by a two-year warranty

User questions & answers

Question:	How loud is it
Answer:	Not as loud as belt sander. If I was doing a lot of sanding, I would wear hearing protection. It's about 60 to 70 dbs when sanding. The belt sander is about 70 to 80 when sanding. Prolonged use : ear plugs
Question:	Did i get a lemon ? The largest sanding sleeve slides when the machine starts, and so no pressure can be applied to it. What to do
Answer:	Could be the sleeve. I tighten mine down and it works fine. I'm very happy with the one I have. I would contact the manufacturer.
Question:	what's the actually sanding height possible with this sander
Answer:	If the sanding drum in installed flush with the rubber core, the "as-designed" safe sanding height ( distance from the table top to the bottom of the drum downstroke) is 3 3/4 inches. The stroke is 1/2 inch, so it will sand a total of 4 1/4 inches if utilizing the upstroke.
Question:	Anyone find a place to put the extra washers? It's driving me nuts having, seemingly, no where to put them
Answer:	All those neat little places that are designed to hold the accessories are designed by people that don't use the equipment. All the washers, sanding sleeves, mandrills for my machine are in a box not far from the sander. Anything stored as per design would end up covered in sawdust and would have to be removed every time a vacuum or air gun is used for clean up. Cigar box (or similar) is just fine.

Product features

WEN 6510 Oscillating Spindle Sander

Remember when you had to sand those rounded workpieces by hand? With the WEN Oscillating Spindle Sander you'll simplify the daunting task of sanding down curves, arcs, contours and other odd shapes. Expect our quiet 1/2HP 3.5 Amp motor to generate up to 58 oscillations and 2000 rotations per minute with a 5/8 inch stroke. Our package includes six easy-to-change sanding sleeves to allow for a full range of curves that match whatever the situation calls for. The ultra-convenient 1.5 inch dust port provides the option to attach a dust extractor to collect sawdust, ensuring a cleaner work surface while minimizing clean-up after the project.

Powerful Motor

Delivers 3.5 amps (1/2 HP) of sanding power, generating up 2000 RPM and 58 OPM.

Designed for Stable Operation

Pre-drilled holes for mounting along with the sturdy and heavyweight design maximize tool stability.

Cast Iron Worktable

The 15 by 11.5 inch worktable provides more than enough space for larger projects during operation.

Onboard Storage

Side rods and disc slots provide convenient storage for the wide variety of sanding drums and discs.

Ultimate Versatility

The WEN Oscillating Spindle Sander features six different-sized sanding sleeves (1/2, 3/4, 1, 1-1/2, 2, and 3 inches in diameter) and five different rubber drums for optimal compatibility with any size of workpiece. Whatever the shape of your project, expect the WEN 6510 Oscillating Spindle Sander to deliver the right size drum for the job.