10 best ryobi orbital sanders

Product description

If there are flat or rounded wooden surfaces that need the grit and splinters taken off, the the Ryobi RS290G is the tool to do it right. It’s a compact unit that weighs in at only 4 pounds, letting you put your focus into hitting the spots you need to without worrying about your arms tiring. It has an ergonomic rubber molded to the grip that lets you keep an extra tight hold on the piece, even in slippery conditions. You’ll need that grip, too. At 12,500 orbits per minute, this compact device packs a punch. It’ll be able to run as long as you’re connected to power, drawing in 2.6 amps. Use it with the hook and loop sanding pads included for projects that need to be done as soon as you unpack the box. You won’t have to worry about sawdust getting all over your workplace, either. A bag conveniently located on the back of the unit sucks up sawdust while the motor runs, giving you the most vision of your project possible. Whether you’re refinishing cabinetry, perfecting your doors, or performing any number of renovations that need splinters taken out, the Ryobi RS290G is the sander you can rely on.

• DUST BAG: Keep your workspace neat with the onboard, removable dust bag that helps protect you from blowback while keeping your target visible
• HOOK AND LOOP PAD REPLACEMENT: A convenient hook and loop system makes quick pad changes a breeze
• INCLUDED SANDING DISCS: With these, you can use the tool right out of the box and pick up extras later
• ERGONOMIC HANDLING: The hex-notched rubber design allows you to keep a grip on this tool without worrying about letting it go, even in slippery conditions
• CONVENIENT ON / OFF SWITCH located next to the grip, so you can be sure you have a firm grip when you’re activating and turning off the unit. This way, it won’t get away from you

User questions & answers

Product description

After you have cut and assembled wood, you need to clean your piece up. This orbital sander by Ryobi, the P411, is a handy little tool that helps you keep your furniture or other wood projects splinter-free and looking neat! At 10,000 orbits per minute, the P411 is very strong for its size. Hold it at an angle to the wood and work lightly, because the snappy motor shows that there is more to power than size! Adding even more convenience is the onboard dust bag that helps to keep your workspace neat and tidy while you improve your home. Being compatible with the Ryobi One+ 18-volt battery system, you can use the same batteries you use for the 50 other One+ tools in your arsenal on this orbital sander. Get ready to use the tool right out of the box, because it even has an assortment of sanding pads included. Clip them on with the hook and loop attachment system, plug the battery in (sold separately), and get to work! You’ll have smooth furniture in no time with Ryobi’s P411 Orbital Sander.

• CORDLESS: compatible with the Ryobi One+ battery system. Work anywhere without cords and extensions getting in the way of your work
• INCLUDED SANDING PADS attached using a hook and loop connecting system for optimal user convenience
• RUBBER OVERGRIP with notches makes it easy to handle despite intense vibrations from the powerful motor
• DUST BAG attached to the tool to collect any shavings from your work and reduce the need for post-job cleaning
• 10,000 ORBITS PER MINUTE make this perfect for any sanding and polishing job if you apply the proper pressure

User questions & answers

Product description

Our 20V max* XR Brushless 5 in. Cordless Random Orbital Sander provides you with the power and runtime needed to get the job done. A variable-speed dial provides ultimate speed control from 8, 000 – 12, 000 OPM for a variety of projects. One-handed locking dust bag attaches securely to the sander to aid in dust Collection or the user can attach the sander directly to the DWV010 or DWV012 dust collectors. Rubber overmold grip provides comfortable sanding. Replacement 8-hole hook-and-loop sanding pad for Quick, easy paper changing. Texturized rubber overmold grip for comfortable sanding. Dust port is designed to fit directly to the DWV010 or DWV012 dust collectors (sold separately). PSA replacement pad available as service part number N373679 (Sold Separately).

• Variable speed to match the speed to the application
• Texturized rubber overmold grip for more comfortable sanding
• Low height gets you closer to the work surface for more control when sanding
• Brushless motor provides long run time
• Replaceable 8-hole hook-and-loop sanding pad for quick, easy paper changing
• Battery & charger sold separately

User questions & answers

Product description

The Ryobi 18-Volt ONE+ 5 in. Random Orbit Sander is an excellent choice to deliver optimal results for a wide variety of sanding applications. It delivers 10,000 orbits per minute for a smooth, swirl-free finish on your work surface, ergonomic palm grip design increases user comfort during extended use, hook and loop accessory fastening system for added convenience, lock-on switch offers comfortable operation during extended use and GRIPZONE overmold for optimum grip and user comfort. The Corner Cat Finish Sander is a great solution for smooth, swirl-free finishes for your sanding projects. This tool features a unique shape that allows sanding in tight spaces while delivering 11,000 orbits per minutes for efficient stock removal. This unit includes 3-Piece of sandpaper to get you started. The 18-Volt ONE+ Corner Cat Finish Sander is sold as a bare tool, allowing you to build on your ONE+ collection without spending additional money on batteries and chargers with each tool purchase. Best of all, like every Ryobi 18-Volt ONE+ blue or green tool, this tool works with any 18-Volt ONE+ battery.

• P411 Random Orbit Sander: 10,000 orbits per minute
• P401 Corner Cat Sander: 11,000 orbits per minute
• Buho 15" Tool Bag
• Bare Tool Items, Battery Sold Separately

Product description

If you’re in the market for a sander that can get into tight nooks and crannies with minimal risk to damaging your wood, then you need not look further than the Ryobi S652DGK. At 14,000 orbits per minute, this tool can power through most tabletops, doors, frames, or other flat pieces with ease. It has an ergonomic grip with a rubber mold that allows you to hold this piece tightly, even in slippery conditions. With that, you can be sure not to let go and have this run away on you. A dust bag is included, helping to keep your workplace clean, and the design of the unit is optimized to suck as much dust up as possible. Holes are punched into the business end of the unit, as well as a hole punch to conform whatever new sandpaper you get to the design. Not that you’ll need to get new sandpaper for a time, though, because the S652DGK comes with four pieces of sandpaper for you to use right out of the box. When it’s time to put the unit away after the job, a contractor’s bag has been included to help you with organization. With a sizable 6 ft cord, a powerful motor, ergonomic design, and everything you need to get started on work immediately, the Ryobi S652DGK is a valuable addition to any DIYer’s finishing collection.

• ERGONOMIC GRIP with notched rubber overmold lets you keep control over your sanding, even in slippery conditions
• DUST BAG helps you keep your workplace tidy and your vision clean of sawdust
• HOLE PUNCHER INCLUDED to conform any pads you purchase separately to this particular sander
• 4 SANDING PADS INCLUDED so you can get to the job as soon as possible
• CONTRACTOR’S BAG INCLUDED to keep your tool and accessories organized off of the jobsite

User questions & answers

Product description

Ryobi Dust Bag Assembly

• Fits Various Ryobi Models Including: S652DK 1/4 Sheet Double Insulated Sander, RS290 Random Orbit Sander, CFS1503K Corner Cat Sander, CFS1503 Sander, CFS1503G Corner Cat Sander, RS290G Random Orbit Sander, S652D 1/4 Sheet Double Insulated Sander
• The Dust Bag Is Used To Collect The Dust And Debris When The Sander Is In Use
• It Is Connected To The Spout On The Sander Housing

User questions & answers

Product description

Ryobi introduces the Ryobi Backing Pad. This backing pad is compatible with all Ryobi random orbit sanders. The backing pad can be used with any PSA sandpaper type. See below for more information on this tool.

• Fits all 5 in. Ryobi random orbit sanders
• Backing pad works with all PSA sandpaper
• Hook-and-loop conversion pad for fast, easy changes
• Pad has an 8-hole pattern for increased dust collection

User questions & answers

Product description

The Ryobi CFS1503GK is a powerful, compact corner sander that will serve you well. Its design allows it to sneak into corners that sheet sanders wouldn’t be able to reach. The pointed style of sanding is also ideal for working around edges of furniture and cabinetry. With a diverse skillset, you’ll find plenty of use for the Corner Cat in your garage, at home, or on the professional construction site. Your jobs will be clear of debris with the onboard dust bag. It collects waste accumulated from your work up through the holes drilled into the bottom of the unit. It’s reliable, too. The on / off switch is designed in such a way that dust will not make its way into the unit to create annoying jams. Handling will be simple with the tool’s compact size. Additionally, there is a notched rubber overmold on top of the unit that will let you maintain a comfortable grip, even in slippery conditions. With 10 pads and a carrying case, you’ll be set to get to work on a variety of jobs in no time. You can’t go wrong with the Ryobi name in the palm of your hand.

• COMPACT DESIGN AND UNIQUE SHAPE allows you to dig into tight corners for flooring or stair sanding
• KEEP A COMFORTABLE GRIP with the rubber overmolding on top of the unit than increases friction between it and your hand. This lets you work effectively even in slippery conditions
• ONBOARD DUST BAG will keep your workstation clear of debris, so you can focus on the task at hand instead of having to take constant cleaning breaks
• DUST PROTECTED ACTIVATION SWITCH will not get lodged with debris, allowing you to start and stop in practically any degree of messiness
• 10 INCLUDED SANDING PADS of assorted grit will help you hit the ground running right out of the package

User questions & answers

Product description

This item is Factory Reconditioned, some show more wear than others. Battery and Charger SOLD SEPARATELY

• Battery and Charger SOLD SEPARATELY
• Random orbit action provides a swirl-free finish
• Lock-on switch
• On-board dust collection bag
• This item is Factory Reconditioned, some show more wear than others

User questions & answers

Product description

This item is Factory Reconditioned, some show more wear than others. Battery and Charger SOLD SEPARATELY

• This item is Factory Reconditioned, some show more wear than others
• Battery and Charger SOLD SEPARATELY
• 10,000 orbits per minute for a smooth, swirl-free finish
• On-board dust collection bag ensures a clean workspace

User questions & answers