10 best benchtop sander for wood

Product description

At JET Tools, we see a future built on great brands, products, and people. In every facet of our business, we leverage the strengths of our global infrastructure to maximize the benefits of all three.

Featuring design improvements like a relocated and sealed on/off switch (to prevent dust infiltration), and shelves for storing your five complete spindles, the JET 708404 JBOS-5 5-1/2 Inch 1/2 HP Benchtop Oscillating Spindle Sander with Spindle Assortment, 110-Volt 1 Phase is a true powerhouse. Its tilting table, spindles with threaded ends, and robust induction motor tackle the toughest sanding projects with ease.

Oscillation Reduces Friction and Ensures Consistency

The JBOS-5 creates a one-inch oscillating action that reduces friction heat, thereby protecting your wood pieces and prolonging the life of the sleeve. Its main spindle support also runs on precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism for reliable, consistent performance job after job.

Additionally, the oscillation gears run in a sealed, lubricated box to prolong their life and durability.

Powerful Induction Motor for Reliable Performance

The JBOS-5 comes equipped with a powerful 1/2 HP induction motor that easily handles all your sanding projects. And thanks to the table inserts and a built-in, two-inch dust port, you won't have to worry about dust and debris falling into the motor and marring its performance, compromising your view of the workspace, or causing injuries and accidents.

Tilting Table for Bevel Sanding

To give you the flexibility to handle a variety of jobs and material sizes, the JBOS-5's table tilts to 45 degrees. This tilting ability also accommodates bevel sanding projects.

Safety Features for Smooth Operation

Designed for safe and smooth operation, the JBOS-5 boasts several innovative safety features. First, a removable on/off safety switch prevents accidental start-ups. There are also built-in storage racks to keep spindles and table inserts handy and within safe and easy reach. Finally, the benchtop includes four non-skid rubber feet to keep the machine stable during use.

Quick Spindle Changes and a Scratch-Free Finish

You can trust the JBOS-5 to deliver precise, quality results in less time. Spindles have threaded ends for quick, easy changes, and a one-inch spindle ensures a scratch-free finish.

The JBOS-5 measures 17 x 20.8 x 18.2 inches (WxHxL), weighs 82 pounds, and is covered by a five-year warranty.

About JET: A History of Sharing New, Feature-Rich Products

Opened in 1958 after the founder of the company, Leslie P. Sussman, took the first Boeing Jet Airplane trip from Seattle, Washington to Japan, JET began as a small dealer that sold air hoists and trolleys out of a single hardware store in Seattle. Over the years, JET has carried everything from snowmobiles, transmitter radios, and forklifts to nylon stockings, but by the early 1970s, metalworking had become the base of their business line. And by the 1980s, JET had expanded into the realm of woodworking. Today, you'll find that JET offers a wide range of popular woodworking tools that are backed with best-in-class features and excellent service.

What's in the Box

Complete 1/4-, 1/2-, 5/8-, 1-1/2 and two-inch spindle assemblies, two round table inserts, and two oblong table inserts.

From the Manufacturer

With a large cast-iron workspace and table that tilts to 45 degrees, this 1/2 hp sander can accommodate even the heaviest sanding project. The 1-inch spindle has an oscillating action that provides a scratch-free finish and prolongs the sleeve life. Other features include non-skid rubber feet to prevent movement while in use, removable safety switch, and a built-in dust port. Sander comes with 1/4-, 1/2-, and 5/8-inch spindles, 1-1/2-and 2-inch complete spindles, and two round and two oblong table inserts.

FEATURES

• Large cast iron workspace to handle all your projects Table tilts to 45 degrees handle all bevel sanding projects
• The 1" spindle oscillating action provides a scratch free finish and prolongs sleeve life
• Powerful 1/2 HP motor can accommodate even the heaviest sanding projects
• Four non-skid rubber feet prevent the machine from moving while in use
• Built in diameter of dust port to collect the dust before it becomes airborne
• Removable safety switch
• Oscillation gears are encased in a lubrication box to greatly prolong life and durability.

STANDARD EQUIPMENT

• Complete 1/4", 1/2", 5/8", 1-1/2" and 2" spindle assemblies
• 2 round table inserts
• 2 oblong table inserts

SPECIFICATIONS

Model: JBOS-5

Table Size (in): 14 1/2 x 14 1/2

Table Tilt (Down): 0 - 45 degrees

Spindle Speed (RPM): 1,725

Oscillations (per minute): 30

Length of Oscillations (in): 1

Motor (TEFC): 1/2 HP, 1Ph 110V

Net Weight (lbs): 77

• VERSATILITY: Table tilts up to 45°.
• LONG LIFE: 1" oscillating action protects wood, and prolongs sleeve life.
• EFFICIENCY: Spindles have threaded ends for fast, easy changes.
• CONVENIENCE: Built-in storage racks keep spindles and table inserts nearby.
• SAFETY: Removable on/off safety switch prevents accidental start-up.

User questions & answers

Question:	What is the maximum spindle diameter that can be fitted
Answer:	I believe a 3”. I am not sure if jet still offers a 3” spindle, but they did when I got mine. But I had to go to the jet web site. Good luck.
Question:	what's the foot print of this machine and how high is it
Answer:	Base bottom is 12" square, top plate is '19 high. It's a fine instrument and I enjoy using it.
Question:	If the sander spindle is 5 1/2" will the 6" sanding sleeve work on it
Answer:	On my Jet sander, the spindles and sleeves vary from 5-1/2 to 6". (The smaller diameter sleeves are the longer ones for some reason. ) I see no problem putting 6" sleeves on 5-1/2" spindles, and vice versa. I like this sander a lot, by the way.
Question:	Is the table cast iron
Answer:	Yes the table is cast iron with steel center inserts.

Product features

SPINDLE ASSEMBLIES AND SLEEVES

This sander includes five sanding spindles and sleeves (100 grit).

• 1/4" x 6"
• 1/2" x 6"
• 5/8 x 6"
• 1-1/2" x 5-1/2"
• 2" x 5-1/2"

TABLE INSERT PLATES

Four table inserts are provided, to prevent dust and debris from falling into the motor, and help protect operator.

• 3/4" Round
• 2" Round
• 3/4" Oblong
• 2" Oblong

LARGE 14-1/2” TILTING TABLE

Table tilts up to 45° to accommodate bevel sanding projects.

Product description

Whoever said, “if you’ve seen one sander you’ve seen them all” was wrong. The General international Belt & Disc Sander was built for versatility with its 0 to 45 degree tilting aluminum work table which can be adjusted for miter polishing. The 16-1/2 in x 4-7/8 in. belt sander tilts to work both horizontally and vertically for grinding and polishing flat surfaces.

• HEAVY-DUTY WOODWORKING - Strong cast iron, steel & aluminum construction with 0 to 45 degree tilting aluminum work table that can be angled for miter polishing.
• EXTREMELY VERSITILE - Belt sander tilts to work both horizontally and vertically, grinding and polishing flat and cambered surfaces.
• HIGH-POWERED SANDING - 375 W Motor, 120 V ~60Hz, No-load motor speed: 3450 RPM; Amp: 4, HP- 1/2
• QUICK & EASY BELT CHANGES - Quick release systemmakes belt changes a breeze! Belt is also easily adjustable with tracking knob.
• FEATURES INCLUDE - Miter Gauge, 6 in. peel-&-stick sanding disc & 4 in. x 36 in. Sanding belt, 2-1/4 in. I.D. dust port and L-Shaped steel work stop

Product description

Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you’ll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you’ll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.

• Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
• Belt tilts anywhere from 0 to 90 degrees
• Sturdy cast iron base prevents any heavy vibrations
• 4.3 Amp motor provides up to 3600 RPM
• Tension release lever provides for simple changes between sandpaper grits

User questions & answers

Question:	Are there finer grits avaialable than the 80 that comes with it
Answer:	You can get belts all the way up to 4000 grit with no problem.
Question:	Which is best all around novice machine, the 6502T or 6500 (both Wen
Answer:	I have the 6502t works like the boss , great product
Question:	Does the unit come assembled
Answer:	Yes, it comes mostly assembled. You have to put on the table for the disk and possibly the disk and belt.
Question:	Could this be used to smooth cut glass bottles
Answer:	You could use any sander as long as you use glass grinding belts

Product features

WEN 4 x 36-Inch Belt Disc Sander

Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you'll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch sanding disc, you'll have the capacity to sand whatever work piece your heart desires.

Heavy-Duty Cast Iron Base

The sturdy cast iron base prevents wobbling and walking, ensuring the sander stays in one place while you're sanding.

Adjustable Belt

Tilt the belt from a horizontal to a vertical position or anywhere in between depending on the needs of your project.

Dust Collection Port

Attach your favorite dust collector to the 2.5-inch dust port to minimize clean-up of saw dust and debris in your workshop.

Table with Miter Gauge

The sanding disc is accompanied by a support table equipped with 0 to 45° beveling capabilities and a removable miter gauge.

Product description

Remember when you needed a versatile and reliable sander? The WEN 1 x 30-Inch Belt Sander with 5-Inch Sanding Disc sands, smooths and deburrs jagged edges and splinters on your wood and lumber. With a 2.3-amp motor, users should anticipate speeds of up to 3160 feet per minute on the belt and 3450 RPM on the disc. Changing the spacious 1-inch-by-30-inch belt is a breeze, giving you the power to switch sand paper grits quickly and easily. The compact design makes transportation and storage easier than ever while the heavy-duty base prevents walking and wobbling during operation. With all of this in addition to the 5-inch side disc, you’ll have the capacity to sand whatever your heart desires. A sturdy beveling work table accompanies both the disc and the belt to provide a reliable source of support for your workpieces. This package also includes an 80-grit sanding disc, a 100-grit sanding belt, a miter gauge for angled workpieces and two separate dust ports for vacuum attachments. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians, and a helpful customer phone line. Sand the tightest of corners and the oddest of shapes with the WEN 1 x 30-Inch Belt Sander with 5-Inch Sanding Disc. Remember when you could sand almost anything? Remember WEN.

• Two-in-one sanding machine includes both a 1-by-30 inch belt and a 5-inch disc
• 2.3A motor provides up to 3160 FPM for the belt and 3450 RPM for the disc
• Sturdy heavy-duty base prevents walking and wobbling during operation
• Features two separate dust ports for maximum vacuuming efficiency
• Includes a miter gauge, an 80-grit sanding disc, a 100-grit sanding belt and a 2-year warranty

User questions & answers

Question:	Would this have any problems shaping micarta for knife handles
Answer:	It would handle it fine. It actually has good power and won't bog down if you need to press into it. Just have the right grit for the material removal rate you want. I bought it for refinishing a steel part with 220 and 600
Question:	Why does it take 1 to 2 months to ship
Answer:	Order from Amazon for quick shipping.
Question:	Can this be screwed down to a work bench
Answer:	Yes it can be, but you will likely have to attach it to a board first, then screw the board down. The bolt holes are positioned such that it's difficult to access them dirctly.
Question:	Is the 5 "disc sanding disc not hook and loop and has to be glued each time you change a sanding disc? This could be a deal breaker for sure
Answer:	Most disc sanders are glue on, you don’t want the play hook and loop gives. I guess it would depend on what your using it for.

Product features

WEN 1" by 30" Belt Sander with 5" Disc

Remember when you could sand those hard to reach places? The WEN 1 x 30-Inch Belt Sander with 5-Inch Sanding Disc sands, smooths and deburrs jagged edges and splinters on your wood and lumber. With a 2.3-amp motor, users should anticipate speeds of up to 3160 feet per minute on the belt and 3450 RPM on the disc. The compact design makes transportation and storage easier than ever while the heavy duty base prevents walking and wobbling during operation. With all of this in addition to the 5-inch side disc, you’ll have the capacity to sand whatever your heart desires. A sturdy beveling work table accompanies both the disc and the belt to provide a reliable source of support for your workpieces. This package also includes an 80-grit sanding disc, a 100-grit sanding belt, a miter gauge for angled workpieces and two separate dust ports for vacuum attachments.

Two Dust Ports

Two independent dust ports connect to either 1-1/2" or 2" dust hoses thanks to the included adapter.

Beveling Tables

Bevel both the disc and belt tables up to 45 degrees to help sand angled work pieces.

Heavy-Duty Base

Heavy-duty base includes mounting holes to prevent wobbling and walking during operation.

Includes Miter Gauge

The included miter gauge helps add precision during sanding operations on the 5" disc.

Product description

Remember when you could sand the finest details of your workpiece? smooth out tight corners and strange contours in wood, metal, plastics and more with the WEN variable speed detailing file sander. The narrow 1/2-by-18-inch belt pivots 55 degrees to meet the particular needs of the project at hand. The auto-tracking design allows for automatic alignment of the sanding belts without the need for any adjustments. Easily switch between grits with the tool-free belt changing system or adjust the variable speed dial for speeds anywhere from 1080 to 1800 feet per minute. This handheld 2-amp belt sander weighs in at a mere 2-1/2 pounds with a compact body for squeezing into tight spaces and awkward angles. Minimize cleanup by hooking the sander up to a dust Collection system of your choice using the included dust port attachment. And, because it’s a WEN product, your WEN variable speed detailing file sander includes three abrasive sanding belts (80, 120, and 320 grit), a two-year warranty and a friendly customer help line all to make sure you remember WEN.

• Variable speed dial powers the belt anywhere from 1080 to 1800 feet per minute
• Auto-tracking belt system requires no tensioning or adjustments.Range of Motion:50°
• Pivot the 1/2-by-18-inch belt up to 55 degrees to meet the needs of any project
• Tool-free belt installation makes for quick and easy belt changes during the job
• Includes three abrasive sanding belts, a dust port attachment and a two-year warranty

User questions & answers

Question:	where can I get more belts
Answer:	Pretty sure you can find replacement belts on Amazon. I have seen them there. I cannot recall the size of the belt offhand (1/2 x 18?) but that is what you would want to search for. The ones I saw were made by another manufacturer.
Question:	Would this help get tough to sand parts of my hardwood floors
Answer:	I was a professional carpenter, served a 4 year apprenticeship, have worked on residential, commercial and industrial projects, including hardwood floor refinishing. I retired from the trade in 1989 (it sure doesn't seem that long ago!). In short, this is a great sander, but it will not work for what you want. Go to a rental store and rent the appropriate equipment. Above all, have a top notch vacuum at your disposal.
Question:	Can the filer handle sanding a small plastic while a very small amount of continuous stream of water is pouring over the sample, for cooling
Answer:	Don't believe the unit is made for water cooling.. Water may be thrown into the motor. You might be better off looking for a different cooling agent. Air for example?
Question:	Any metal workers find the 2amp motor adequate for taking down the occasional weld or brush finishing stainless tube (using good belts of course
Answer:	Yeah, it’ll take a steady diet of weld grinding. I’ve been using 80 grit. Just let the tool do the work without much down pressure. Very good tool..

Product description

Shop Fox W1831 Oscillating Spindle Sander w/ 5 Rubber Sanding Drums & 6 Sleeves

• 1/2 Horsepower Permanent Magnet Motor, 120-Volt, Single Phase, CSA Certified
• Table Size: 11-1/2-Inch W x 15-Inch L x 1-5/16 H
• Sanding Drum Diameter: 3/4", 1", 1-1/2", 2" and 3"; Sanding Drum Length 4-1/2-Inch
• Sanding Sleeves: 1/2", 3/4", 1", 1-1/2", 2" and 3" (1/2" sleeve fits directly on the spindle)
• Weighs 30-Pound

User questions & answers

Question:	Will this work on hardenable steel? 1/2 hp seems a little low for it
Answer:	No, this is for woodworking. You would need to purchase a grinder for harden steel.
Question:	Can a vacuum be connected to this unit
Answer:	Yes, you can hook up a vac to it. It has a 1 1/2" plastic connector that sticks out of the back of it. You will need to size your vac to fit over this.
Question:	Does it have a tilting tabletop
Answer:	No it does not have a tilting table but it is a very good sander.
Question:	What's the Spindle Stroke on this
Answer:	5/8"

Product features

Shop Fox W1831 Spindle Sander

This benchtop Oscillating Sander is ideal for smoothing edges after cutting with a bandsaw or scroll saw. Fifty eight oscillations per minute ensures even sanding and six sanding sleeve diameters let you sand a full range of inside curves down to 1/2-inch diameter.

Six Spindle Sizes

With six sanding sleeve diameters, this compact sander will handle just about any sanding task you throw at it. The on-board storage keeps sanding spindles, sleeves, table inserts and spindle washers organized and easily accessible.

The various inserts included with the W1831 are used to close the gap between the table insert and drum which reduces the risk of pinching and offers more work support for your sanding jobs.

Built-In Dust Port

The built in 1-1/2-inch dust port ensures a cleaner shop and less airborne dust particles when connected to a dust collector.

Locking Power Switch

The locking power switch with removable key helps protect against unauthorized use and heavy duty cast iron table offer plenty of work support; all which make this a great bench top machine.

Product description

The DW734 12-1/2" Thickness Planer with Three Knife Cutter-Head is powered by a 15 Amp motor for managing large, deep cuts in hardwood. Three-knife cutter head with speed of 10,000 rpm provides 96 cuts per inch, delivering one of the finest finishes of any portable planer.

The DEWALT DW734 12-1/2-Inch Thickness Planer features a three-knife cutterhead and a powerful, 15 amp motor that delivers 10,000 rpm. Also offering quick, accurate depth adjustment, extra-long feed tables for material support, and the convenience of knives that are reversible and disposable, this planer makes it easy to create clean, custom stock.

12-1/2-Inch Thickness Planer with Three Knife Cutterhead At a Glance: Powerful 15 amp motor Three-knife cutterhead operates at 10,000 rpm 96 cuts per inch for a fine finish Disposable, reversible steel knives are easy to change 1/8-inch maximum cut depth; 6-inch depth capacity; 12-1/2-inch width capacity Three-year limited warranty, one-year free service, 90-day money-back guarantee

Create custom stock with the thickness planer's 10,000 rpm three-knife cutterhead. View larger.

Versatile planer cuts a wide range of hardwoods. View larger.

Powerful 15 Amp Motor for Deep, Clean Cuts

Benchtop planers are a long-term investment that allow you to buy rough stock and dimension it yourself. They also make creating custom materials easier, which, makes getting great results easier.

This planer's powerful 15 amp motor handles a wide range of tough hardwoods, and its three-knife cutterhead spins at 10,000 RPM to provide 96 cuts per inch.

Reversible, Disposable Knives for Convenience

The DEWALT DW734 uses razor sharp knives that are reversible and disposable. These knives last 30 percent longer than traditional disposable knives, helping you avoid costly and time-consuming resharpening.

For fast, easy, one-tool knife changes, a set of pins machined on the cutter-head goes through holes machined on the knife. This helps you quickly locate the fresh knife and refasten the knife clamp.

Effective Dust and Debris Management

The DW734 planer includes a dust hood that attaches to a shop vacuum or standing dust collector (sold separately) for efficient collection of chips and debris.

Large Capacity and Easy, Accurate Depth Adjustment

This planer's extra-long infeed and outfeed tables provide 33-1/2 inches of material support. A turret depth stop saves you time when setting the machine at commonly used depths.

In addition, the planer's material-removal gauge and extra-large thickness scale help ensure every pass is accurate. A four-column carriage lock drastically reduces the movement that causes material damage, or snipe, when planning near the end of a board.

This sturdy planer weighs 80 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 12-1/2 inches.

This DW734 12-1/2-Inch Thickness Planer with Three Knife Cutterhead comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DW734 DEWALT 12-1/2-Inch Thickness Planer with Three-Knife Cutterhead and dust hood.

The DEWALT DW734 features extra-long feed tables for material support.

• Three-knife cutter head with 10,000 rpm cutter-head speed provides 96 cuts per inch, one of the finest finishes of any portable planer
• Disposable, reversible knives deliver 30% more knife life and make knife change fast and easy.
• Four-column carriage lock drastically reduces the movement that causes snipe
• Extra-long infeed and outfeed tables provide 33-1/2" of material support.
• Powerful 15 amp, 20,000 rpm motor handles larger, deeper cuts in hardwoods.
• Material removal gauge and extra-large thickness scale deliver accurate cuts with every pass
• Turret depth stop allows user to return to their most frequently used depths with ease

User questions & answers

Question:	Has anyone tried planning off paint on cedar with this machine? I have hundreds of feet to recycle
Answer:	yes. I've removed paint and finish with this.. not on cedar, but on mahogany and oak. However, do keep in mind that this will greatly impact the working life of the blades. But that's a small price to pay for such convenience. I say go for it. You'll love the result and it sure beats sanding or scraping with a card scraper.
Question:	Can the in-feed and out-feed rollers or carriage lock be adjusted to reduce snipe
Answer:	Make the last or final pass a very minimul cut depth ie. 1/64. This helps with snipe. The bigger the cut, the more snipe you will get. Make sure the material is support flat against the table as it begins the cut, and on the exit table as well. The pressure rollers tend to make the board 'tip' as it enters and exits (this is typical in any planer, even the big industrial ones found in mill houses). As far as waxing the tables, i much prefer to use a table top silicon type lube usually sold in spray cans at your local wood supply. These leave a non build moisture resistant film that will not only make the table very slick, but leave no waxy residue that can transfer to your lumber and cause finishing issues. Wax that transfers to your lumber can act as a release agent when applying typical lacquer base or poly type finishes. Last but not least, some snipe is considered acceptable from any planer. It's just the way it is. Always start with a board thats a few inches longer than finish length and plan on cutting off the ends. These little planers are better than most, but you can never plan on not haveing some snipe.
Question:	My first project with this will be planing 8"-10" wide Jatoba planks. How many linear feet can I expect to get out of one set of knives
Answer:	i really can not tell you , i still running my first set of knives and i have ran many hundred of feet thru , and they still run great we run oak, pine ,maple ,ash, walnut, beech , lot of oak &ash
Question:	are you happy with this purchase? or do you wish you got the 13" model with 2 speeds for $150 more
Answer:	I'm a hobbyist and have had the DW734 for about a year now. Most of my planning had been hardwoods, Maple, Cherry, Walnut and some Purple Heart. None of them have had complicated figure. The widest board I've run through the machine was about a 9" glue up. I've gotten very good results and virtually no tear out. For my purposes an extra 1/2" in width and 2 speeds wouldn't make any difference in my projects. For me, this was a great buy. Depending on your needs, your results may var :)

Product features

DEWALT DW734 12-1/2" Thickness Planer with Three Knife Cutter-Head

The DW734 12-1/2" Thickness Planer with Three Knife Cutter-Head is powered by a 15 Amp motor for managing large, deep cuts in hardwood. It offers quick, accurate depth adjustment and the convenience of knives that are both reversible and disposable. This fully featured portable planer makes it easy to create clean custom stock.

Product description

Remember when your handheld sander also worked on your benchtop? Maximize versatility with the WEN 3-by-21-Inch Belt Sander. Smooth out surfaces, deburr jagged edges, strip paint, and more. Our variable speed motor runs the 80-grit sanding belt anywhere between 787 to 1312 feet per minute, making easy work out of even the toughest surfaces. If you prefer a more stationary option, simply flip the sander onto its back and attach it to work surfaces up to 1.75 inches thick using the included mounting clamps. The lock-on power switch keeps your sander sanding without having to keep any buttons held down. The hard-bodied dust collection chamber catches excess sawdust during operation, and can be swapped out for the dust hose of your choice. And because it’s a WEN product, your handheld and benchtop belt sander comes backed by a two-year warranty, a nationwide network of skilled service technicians, and a friendly customer helpline. Remember when you had versatility in your sander? Remember WEN.

• 7-amp variable speed motor rotates the belt anywhere from 787 to 1312 feet per minute
• Easily attaches to your favorite benchtop for an upward facing stationary belt sander
• Lock-on power switch allows for continuous sanding without requiring a constant grip on the trigger
• Includes a dust collection chamber, a dust port adapter, a dust port reducer, two benchtop clamps, and 80-grit sandpaper
• Backed by a two-year warranty

User questions & answers

Question:	Im looking to try a new hobby. Would this sander work to refinish a wooden table
Answer:	Hello and thank you for reaching out! This bag measures 4" Wide x 13" High x 4" Deep, so please measure the bottom of the champagne bottle to ensure a good fit.
Question:	How noisy is the unit, and how well does the dust bag work
Answer:	Hello and thank you for your inquiry! Yes, these boxes will fit inside of each other. Please reference the third picture with measurements.
Question:	Does this come with a case
Answer:	Hello and thank you for reaching out! The large box measures 13” x 9.5” x 4.5”. It might be a tighter fit, but a thick sweater could fit.
Question:	has anyone flipped this upside down and used it as a sanding platform? and moved the object you're sanding in relation to the sander? is it stable
Answer:	Sure, if you don't tear it. I'm reusing mine.

Product description

The DWE6421 5-inch Single Speed Random Orbital Sander with hook and loop pad has a 3-amp motor that delivers 12,000 OPM. The separate counterweight reduces vibration and along with the rubber overmold grip provides comfortable sanding. A shorter design allows users to get closer to the work surface and the one-handed locking dust bag attaches securely to the sander to aid in dust collection or the user can attach the power sander directly to the DWV010 or DWV012 dust collectors.

• 3.0-amp motor of the orbital sander spins the pad at 12,000 OPM
• Shorter height of the hand sander allows the user to get closer to work piece
• Separate counterweight design reduces vibration for improved comfort of the electric sander
• Rubber over-mold in all of the critical areas of the sander
• Improved dust-sealed switch to protect against dust ingestion for longer switch life
• Improved dust collection and one-handed locking dust bag
• Dust port is designed to fit directly to the DWV010 or DWV012 dust collectors
• To attach dust port to other vacuum systems with 1-1/4" hoses, use DWV9000 Universal Quick Connector

User questions & answers

Question:	Can you use this package - mestool 58-ap 100 per box include 60 80 120 150 and 220 grits that you offer with this particular sander
Answer:	I suggest you get educated on the tools, Velcro is for Velcro ( hook and loop) , adhesive is for smooth vinyl pad , hope this helps someone...
Question:	replacment pad ? cant find one,help
Answer:	With the right grit sandpaper yes.
Question:	How long is the cord
Answer:	I've used mine about a year now at the shop I work at.
Question:	Can this be used to sand a car
Answer:	The Orbit Diameter for 6 inch and 5 inch both is 3/16”, hope this can help you. Have a nice day!

Product description

The Intelligent Design Nadia Comforter Set turns any bedroom into fun and inviting getaway. This stylish comforter features a grey and white chevron print broken up by white vertical stripes and a solid teal color that pops Matching sham(s) with a teal flange pairs exceptionally well with the delightful chevron pattern, while two decorating pillows in coordinating colors help complete the look. Completely reversible, the comforter can flip to a solid grey, for a more neutral look. Made from ultra-soft microfiber, this comforter set is machine washable for easy care.

From the Manufacturer

BENCH BELT & 8"DISC SANDER 3/4HP.

• DELUXE MITER GAUGE: Turns and locks for common angles, 45 degrees both left and right
• HEAVY-DUTY: Has a steel base, rubber feet, and cast iron construction
• REMOVABLE PLATEN: Allows for sanding, grinding or finishing of outside curves or odd shaped work pieces on the belt
• THREE-IN-ONE: Abrasive belt unit does the work of a jig saw, coping saw, or hand file while removing material and finishing
• EASY ADJUSTMENTS: Allows an operator to get into small openings, plus handle odd shapes and angles

User questions & answers

Question:	How big is it
Answer:	It's overall dimensions according to the product's details are: 20-1/2 x 22-3/4 x 20 inches. According to the product's information section: 16 x 16.7 x 23.1 inches
Question:	anybody know whether this machine will work with an auxiliary speed controller ...I think the disc sander spins too quickly for some work
Answer:	Haven't found it too fast for any material I've needed to shape. Better getting the correct grinding discs.
Question:	Can you make the motor variable speed
Answer:	You will need to do a little research, but you should be able make this a variable speed unit. It has a standard 3/4hp 120vac single phase motor with a 3450 base speed. You will need to purchase a 3/4 hp 120 vac variable frequency AC motor controller. Expect to pay about $200 for a controller. My only caution is motors don't like to run below 50% base speed continuously, without additional cooling. However, I would not buy this sander again. The disk is fine, but the belt table has a single trunnion and platen is too light. They are not rigid enough to be useful. The real question is will you be satisfied with it after spending $700. I hope this is helpful.
Question:	What is the country where this sander is made? China
Answer:	I Just spent 2-3 minutes trying to find mfg. origin and found nothing. Based on the quality/price I would have to guess that it is made in China-albeit the best you can ever expect from China. Very heavy. The belt housing and both tables are cast iron. The sand wheel housing is an aluminum casting. The belt wheels are cast aluminum but are high quality looking items and run on sealed ball bearings. I think this is probably the best in its size class for anything within 5x-8x the cost. I use it for everything including grinding lathe tool bits and I am thrilled with the purchase.

Product features

JET J-41002 2" x 42" Bench Belt and Disc Sander - 577004

Another JET Bench Belt and Disc Sander combination designed to deliver the superior finish. The design of this machine permits sanding, grinding and finishing of outside curves or odd-shaped pieces. Heavy-duty base, cast construction and cast iron tilting table means you are getting the very best JET has to offer.

Features

- Abrasive belt unit removes material and finishes at the same time, allowing the operator to get into small openings, plus handle odd shapes and angles.

- Deluxe miter gauge that turns and locks for common angles, 45° both left and right.

- Heavy-duty steel base and rubber feet.

Cast Iron Construction

- Allows for sanding, grinding or finishing of outside, curves or odd shaped work pieces on the belt.

- Removable platen allows for sanding, grinding or finishing of outside curves or odd shaped work pieces on the belt.

- Adjustable dust deflector and dust chute.