10 best table top sander

Product description

Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you’ll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you’ll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.

• Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
• Belt tilts anywhere from 0 to 90 degrees
• Sturdy cast iron base prevents any heavy vibrations
• 4.3 Amp motor provides up to 3600 RPM
• Tension release lever provides for simple changes between sandpaper grits

User questions & answers

Question:	Are there finer grits avaialable than the 80 that comes with it
Answer:	You can get belts all the way up to 4000 grit with no problem.
Question:	Which is best all around novice machine, the 6502T or 6500 (both Wen
Answer:	I have the 6502t works like the boss , great product
Question:	Does the unit come assembled
Answer:	Yes, it comes mostly assembled. You have to put on the table for the disk and possibly the disk and belt.
Question:	Could this be used to smooth cut glass bottles
Answer:	You could use any sander as long as you use glass grinding belts

Product features

WEN 4 x 36-Inch Belt Disc Sander

Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you'll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch sanding disc, you'll have the capacity to sand whatever work piece your heart desires.

Heavy-Duty Cast Iron Base

The sturdy cast iron base prevents wobbling and walking, ensuring the sander stays in one place while you're sanding.

Adjustable Belt

Tilt the belt from a horizontal to a vertical position or anywhere in between depending on the needs of your project.

Dust Collection Port

Attach your favorite dust collector to the 2.5-inch dust port to minimize clean-up of saw dust and debris in your workshop.

Table with Miter Gauge

The sanding disc is accompanied by a support table equipped with 0 to 45° beveling capabilities and a removable miter gauge.

Product description

Remember when you had to sand those pieces by hand? Take on arcs, curves, contours, faces and more with the WEN Oscillating Spindle Sander. This versatile machine includes five different sized sanding spindles (1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch), each one oscillating up to 58 times per minute with a 5/8-inch stroke. The powerful 3.5 amp motor rotates the various spindles 2000 times per minute. Onboard storage helps to organize all of the throat plates, rubber sanding drums and table inserts included with this sander while the 1-1/2 inch dust port allows woodworkers to connect a dust collection system to minimize clean up. Adjust the spacious 14.5 by 14.5-inch table anywhere from 0 to 45 degrees to help take on angled edges and surfaces. This sander also comes with five 80 grit sanding sleeves. And because its a WEN Product, your tool comes backed by a two year warranty, a nationwide network of skilled service technicians and a friendly customer help line. It’s time to shake things up with the WEN Oscillating Spindle Sander. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.

• Features five sizes of sanding sleeves: 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch, and 2 inches
• 2000 RPM motor oscillates spindle 58 times per minute with a 5/8-inch stroke
• Onboard storage maintains organization of all accessories and sandpapers
• Spacious 14-1/2 by 14-1/2-inch table bevels up to 45 degrees to accommodate angled workpieces
• Includes a beveling work table, a dust port, ten throat plates, five 80-grit sanding sleeves, four rubber sanding drums, and a two-year warranty

User questions & answers

Question:	How loud is it
Answer:	Not as loud as belt sander. If I was doing a lot of sanding, I would wear hearing protection. It's about 60 to 70 dbs when sanding. The belt sander is about 70 to 80 when sanding. Prolonged use : ear plugs
Question:	Did i get a lemon ? The largest sanding sleeve slides when the machine starts, and so no pressure can be applied to it. What to do
Answer:	Could be the sleeve. I tighten mine down and it works fine. I'm very happy with the one I have. I would contact the manufacturer.
Question:	what's the actually sanding height possible with this sander
Answer:	If the sanding drum in installed flush with the rubber core, the "as-designed" safe sanding height ( distance from the table top to the bottom of the drum downstroke) is 3 3/4 inches. The stroke is 1/2 inch, so it will sand a total of 4 1/4 inches if utilizing the upstroke.
Question:	Anyone find a place to put the extra washers? It's driving me nuts having, seemingly, no where to put them
Answer:	All those neat little places that are designed to hold the accessories are designed by people that don't use the equipment. All the washers, sanding sleeves, mandrills for my machine are in a box not far from the sander. Anything stored as per design would end up covered in sawdust and would have to be removed every time a vacuum or air gun is used for clean up. Cigar box (or similar) is just fine.

Product features

WEN AT6535 3.5-Amp Oscillating Spindle Sander with Extra Large Beveling Table Top

• Features five sizes of sanding sleeves: 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch, and 2 inches
• 2000 RPM motor oscillates spindle 58 times per minute with a 5/8-inch stroke
• Onboard storage maintains organization of all accessories and sandpapers
• Spacious 14-1/2 by 14-1/2-inch table bevels up to 45 degrees to accommodate angled workpieces
• Includes a beveling work table, a dust port, ten throat plates, five 80-grit sanding sleeves, four rubber sanding drums

Remember when you had to sand those pieces by hand? Take on arcs, curves, contours, faces and more with the WEN Oscillating Spindle Sander. This versatile machine includes five different sized sanding spindles (1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch), each one oscillating up to 58 times per minute with a 5/8-inch stroke. The powerful 3.5 amp motor rotates the various spindles 2000 times per minute. Onboard storage helps to organize all of the throat plates, rubber sanding drums and table inserts included with this sander while the 1-1/2 inch dust port allows woodworkers to connect a dust collection system to minimize clean up. Adjust the spacious 14.5 by 14.5-inch table anywhere from 0 to 45 degrees to help take on angled edges and surfaces. This sander also comes with five 80 grit sanding sleeves.

Product description

Remember when you needed a versatile and reliable sander? The WEN 1 x 30-Inch Belt Sander with 5-Inch Sanding Disc sands, smooths and deburrs jagged edges and splinters on your wood and lumber. With a 2.3-amp motor, users should anticipate speeds of up to 3160 feet per minute on the belt and 3450 RPM on the disc. Changing the spacious 1-inch-by-30-inch belt is a breeze, giving you the power to switch sand paper grits quickly and easily. The compact design makes transportation and storage easier than ever while the heavy-duty base prevents walking and wobbling during operation. With all of this in addition to the 5-inch side disc, you’ll have the capacity to sand whatever your heart desires. A sturdy beveling work table accompanies both the disc and the belt to provide a reliable source of support for your workpieces. This package also includes an 80-grit sanding disc, a 100-grit sanding belt, a miter gauge for angled workpieces and two separate dust ports for vacuum attachments. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians, and a helpful customer phone line. Sand the tightest of corners and the oddest of shapes with the WEN 1 x 30-Inch Belt Sander with 5-Inch Sanding Disc. Remember when you could sand almost anything? Remember WEN.

• Two-in-one sanding machine includes both a 1-by-30 inch belt and a 5-inch disc
• 2.3A motor provides up to 3160 FPM for the belt and 3450 RPM for the disc
• Sturdy heavy-duty base prevents walking and wobbling during operation
• Features two separate dust ports for maximum vacuuming efficiency
• Includes a miter gauge, an 80-grit sanding disc, a 100-grit sanding belt and a 2-year warranty

User questions & answers

Question:	Would this have any problems shaping micarta for knife handles
Answer:	It would handle it fine. It actually has good power and won't bog down if you need to press into it. Just have the right grit for the material removal rate you want. I bought it for refinishing a steel part with 220 and 600
Question:	Why does it take 1 to 2 months to ship
Answer:	Order from Amazon for quick shipping.
Question:	Can this be screwed down to a work bench
Answer:	Yes it can be, but you will likely have to attach it to a board first, then screw the board down. The bolt holes are positioned such that it's difficult to access them dirctly.
Question:	Is the 5 "disc sanding disc not hook and loop and has to be glued each time you change a sanding disc? This could be a deal breaker for sure
Answer:	Most disc sanders are glue on, you don’t want the play hook and loop gives. I guess it would depend on what your using it for.

Product features

WEN 1" by 30" Belt Sander with 5" Disc

Remember when you could sand those hard to reach places? The WEN 1 x 30-Inch Belt Sander with 5-Inch Sanding Disc sands, smooths and deburrs jagged edges and splinters on your wood and lumber. With a 2.3-amp motor, users should anticipate speeds of up to 3160 feet per minute on the belt and 3450 RPM on the disc. The compact design makes transportation and storage easier than ever while the heavy duty base prevents walking and wobbling during operation. With all of this in addition to the 5-inch side disc, you’ll have the capacity to sand whatever your heart desires. A sturdy beveling work table accompanies both the disc and the belt to provide a reliable source of support for your workpieces. This package also includes an 80-grit sanding disc, a 100-grit sanding belt, a miter gauge for angled workpieces and two separate dust ports for vacuum attachments.

Two Dust Ports

Two independent dust ports connect to either 1-1/2" or 2" dust hoses thanks to the included adapter.

Beveling Tables

Bevel both the disc and belt tables up to 45 degrees to help sand angled work pieces.

Heavy-Duty Base

Heavy-duty base includes mounting holes to prevent wobbling and walking during operation.

Includes Miter Gauge

The included miter gauge helps add precision during sanding operations on the 5" disc.

Product description

1" x 30" Belt / 5" Disc Sander #50-151 is great for working on small craft projects - home decorations, jewelry, toys, doll furniture, repair work and more. The machine's small motor is very efficient in driving the belt and disc, so stock removal goes quickly. Recommended for light-duty use.

• Belt Table Tilts from -0Degree- 45Degree
• Belt Tracking Knob
• Safety ON/OFF Switch
• 2" Dust Port Included

User questions & answers

Question:	How powerful is it. Does it bog down when putting moderate pressure against the belt or disk. Also does it run true with little to no wobble
Answer:	1) With moderate pressure, it does not bog down. With heavy pressure it slows a bit, but I have not found that to be problematic. However, so you know, I use it with 1/2 in wide belts, so there would be a bit more drag with 1 in belts. 2) There is no significant wobble. It runs true. 3) The only problem I found was a slightly uneven platen, but I was able to bend it back true.
Question:	Is the motor loud when running with nothing being sanded? How would you compare it to a corded 3/8" drill
Answer:	It's not the quietest sander but if I had to rate the noise level on a scale of 1 to 10 with 1 being the quietest and 10 being the loudest, I would give it an 8 with just the motor running.
Question:	Does anyone know the rpm and amps for it
Answer:	Mine says 2.3 amps and belt speed- 3340 rpm (no load) and disc speed 3350 rpm (no load).
Question:	Can you use this sander to sand metal if you buy the right sand paper or is it just for wood
Answer:	Yes you can use this sander to sand metal. I purchased this sander specifically to sharpen knifes and metal cutting tools, just make sure to use the right sand paper.

Product description

Remember when you needed a versatile and reliable sander? The WEN Steel Frame Belt Disc Sander sands, smooths and deburrs jagged edges and splinters on your wood and lumber. With a 3.2-amp motor, users should anticipate speeds of up to 1150 feet per minute. Changing the spacious 4-inch-by-36-inch belt is a breeze, giving you the power to switch sand paper grits quickly and easily. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece. Combine this with the steel base and body for a versatile sander that makes transportation and storage easier than ever.

With all of this in addition to the 6-inch side disc, you’ll have the capacity to sand whatever your heart desires. A sturdy work table accompanies the disc to provide a reliable source of support for your workpieces. This package also includes an 80-grit sanding disc, an 80-grit sanding belt, and a miter gauge for precise sanding on angled edges along with a stop bar for maximum belt safety and control. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians, and a helpful customer phone line all to make sure that you remember WEN.

• Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
• Belt tilts anywhere from 0 to 90 degrees
• Features an open-style steel frame design
• 3.2A motor provides up to 1150 FPM
• Tension release Lever makes for Simple changes to sandpaper grit

User questions & answers

Question:	Is a Miter gauge included
Answer:	If you removed the sanding plate from the front it would fit a wheel I think... Depends on the thickness of your buffing wheel...
Question:	With the belt in the vertical position, how much space is there between the body of the sander and the lower drum
Answer:	Yes 2 ports
Question:	is a belt guard available for the straight belt? one designed to deflect debris away from the operator as it exits the top-end of the belt
Answer:	I do not know the size of that belt. Here is what I have done with a drive belt off an old Sears table saw, I took the old belt to car quest auto parts and they also carry an assortment of machinery belts. You might be able to look up the owners manual on the internet. Also Harbor freight carries that sander, they might have the belt or might order you one.
Question:	Does drive shaft have one bearing or two? Mine (a cast iron model) lasted onlt about 30 hours of use. Steel model has one shaft for both sanders
Answer:	Not loud at all ... just tension the drive v belt and it is a perfect small shop sander. It is shipped with the belt in slack mode so as not to over stretch the v belt. People are just lazy to read the manual - it is much easier to complain via the keyboard.

Product features

WEN 4" by 36" Belt Sander w/ 6" Disc

Remember when you had two sanders in one powerful machine? The WEN Steel Frame Belt Disc Sander sands, smooths and deburrs jagged edges and splinters on your wood and lumber. With a 3.2-amp motor, users should anticipate speeds of up to 1150 feet per minute. Tool-free belt changes give users the power to switch between sand paper grits quickly and easily. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece. With all of this in addition to the 6-inch side disc, you’ll have the capacity to sand whatever your heart desires. A sturdy work table accompanies the disc to provide a reliable source of support for your workpieces. This package also includes an 80-grit sanding disc, an 80-grit sanding belt, and a miter gauge for precise sanding on angled edges along with a stop bar for maximum belt safety and control.

Lightweight Steel Frame

The lightweight steel frame allows for easy transportation while the rubber feet prevent wobbling and walking during operation.

Adjustable Belt

Set the 4" by 36" belt to the horizontal position, the vertical position, or anywhere in-between.

6-Inch Disc with Table

The 6-inch sanding disc includes a beveling work table with a miter gauge for maximum precision.

Tool-Free Belt Changes

Change between sanding belts with ease by simply releasing the tension adjustment lever found on the side of the machine.

Product description

This 4.3-Amp Belt Disc Sander from Rockwell is the 2-in-1 that was purpose-built to remove all the splinters and rough edges from the projects of the modern DIY woodworker. The perfect piece to your workshop when you’re ready to start producing professional-quality work. It combines the power of a belt platform and a sanding table with a 6-inch disc for all your shaping and finishing needs. The ½ HP heavy-duty induction motor pumps out 3450 RPM of disc speed and a maximum belt speed of 1700 SFM. The cast aluminum disc table and 0-45° miter gauge give you all the shaping options you need for common finishing techniques like arcs, contours, and curves. And the dust port lets you hook up a shop vac and clear the debris out of the air while you work for better visibility and breathability. At 42 lbs, this sander has a steady metal base that won’t wobble or walk and absorbs vibration. Yet at 22” x 11” x 13” its footprint won’t take up a whole workbench. This product also comes with a 2-year limited warranty, so you know Rockwell stands behind their tools. Remove burs and jagged edges from your wood and lumber with ease and enjoy the results of your handiwork with the 4.3-Amp ½ Horsepower Belt and Disc Sander 2-in-1 from Rockwell.

From the Manufacturer

The Rockwell RK7866 Shop Series 1/2 horsepower belt/disc sander comes with a 4-inch by 36-inch belt sander and a 6-inch disc sander. The belt table tilts 0 to 90 degrees and the cast-aluminum disc table has a tilt range of 0 to 45 degrees. It is also equipped with an adjustable belt tensioning mechanism which makes for quick and easy belt changes. This unit comes with a 45-degree miter gauge, Allen key, belt sander and disc sander.

• [HORIZONTAL & VERTICAL SANDING] The spacious 4” x 36” belt platform raises and lowers from 0-90° to accommodate almost any project
• [BEVEL EDGES] The sanding table adjusts from 0-45° for smoothing out beveled edges—you’ll have the nicest picture frames in the business
• [HEAVY INDUCTION MOTOR] Powerful 4.3-amp motor provides plenty of power to sand down all your woodworking projects
• [EASY BELT CHANGES] Quick-release tension lever lets you easily change out sandpaper grits for different projects
• [SAFETY SWITCH] Prevents accidental starts so you can confidently leave your shop when you’re done for the day and not have to worry
• [WHAT’S INCLUDED] Comes with: 1pc hex key, 1pc miter gauge, 1pc sanding disc, and 1pc sanding belt

User questions & answers

Question:	Can you use the sander for metal
Answer:	Not sure it was a gift
Question:	What is the size of the belt and disc
Answer:	If you are unsatisfied for any reason, you may have a replacement or full refund.
Question:	Is this just a wen brand with different color
Answer:	The Parent Company Woodland Home is based in USA, however it is manufactured overseas.
Question:	What is the size of the belt and disc sander
Answer:	Ross, I use the stencil to layout the letters (words), with a pencil on the wood. You can then burn the outlines, or fill between the burned lines.

Product features

Rockwell Belt/Disc Combo Sander

With a belt platform that adjusts from 0 to 90 degrees for horizontal and vertical sanding and a sanding table that adjusts from 0 to 45 degrees for sanding beveled edges, the Rockwell Belt/Disc Combo Sander gives you the best result every time. Woodworking will get a lot easier with the Rockwell Belt/Disc Combo Sander.

A Heavy Duty Induction Motor

You will be able to make arcs, curves, contours and more with the Rockwell Belt/Disc Combo Sander. This tool is built with a 4.3 amp heavy duty induction motor for seamless, hassle-free and dependable performance.

Even after several projects and application, this sander will certainly go strong as it is built to be durable and efficient. This also comes with a quick-release belt tension lever for simple belt changes.

Product description

■Steel motor housing ■Maximum speed: 1780 RPM (disc)/1150 FPM (belt) Amps: 1.9 (no load), 8.6 (startup) 120V, 60 Hz Disc: 6" diameter Belt: 36" L x 4" W Overall dimensions: 14" L x 19-7/8" W x 12-3/4" H Weight: 41.56 lbs.

• Sold on Amazon

User questions & answers

Question:	Can you replace the disc with a buffing wheel
Answer:	Yes if you use the right type of sand paper. Sand paper that is meant for metal.
Question:	Is there a dust collection port on this unit
Answer:	Uses a 4" x 36" belt and a 6" disc. But this unit doesn't have much power. I bought another one from Harbor Freight and it had more guts but then went to a 6 x 48 with a 9" disc.
Question:	What size is the v-belt, or where can i get one? the motor drive belt, not the sanding belt. thanks
Answer:	The same unit is sold under the Ryobi, Wen, and one or two other brands. They carry different warranties and it’s possible there are differences in the electronics but they’re the same cast iron frame and 4.3 amp motor.
Question:	How loud is this machine when running
Answer:	"From the ManufacturerThe Rockwell RK7866 Shop Series 1/2 horsepower belt/disc sander comes with a 4-inch by 36-inch belt sander and a 6-inch disc sander. The belt table tilts 0 to 90 degrees and the cast-aluminum disc table has a tilt range of 0 to 45 degrees. It is also equipped with an adjustable belt tensioning mechanism which makes for quick and easy belt changes. This unit comes with a 45-degree miter gauge, Allen key, belt sander and disc sander"

Product description

Are you looking for a versatile and reliable sander?

BUCKTOOL Belt Disc Sander is easy to polish all of the jagged edges and splinters on your wood and lumber and make it smooth. It is an idea for fine wood sanding & polishing.

Powerful motor

This sander was directly drived by a 3/4 Hp induction motor, the motor provides enough power for small and large sanding operations on various materials.

Angle Adjustable

Angle adjustable work table with miter gauge can be used on both sanding disc and sanding belt. Sanding belt tilts up to 90 degrees vertical,

Maintenance Free  

This sander use no belt, no gear, so you don't have to adjust the cog belt tension, change damage cog belt like before.

Warranty

Please feel free to connect us if you have any problem about our products.

Product detail:

120V, 60HZ, 5.0A

Disc size: 6Inch

Belt size: 4x36Inch

Speed: 3450 RPM

Belt speed : 2165 RPM

If you need more information, please search "Bucktool" in Youtube, you can subscribe us to get recent news

• Sanding belt and disc were directly driven by the motor shaft, maintenance-free, you don't have to adjust the belt tension, change damage belt like before
• Motor direct-drive design can increase 25% sanding efficiency than the traditional design. Max. developed 3/4 HP total enclosed induction motor supplies silent but powerful performance. This Sander meets CSA standards
• The belt can tilt from 0 to 90 degrees for horizontal and vertical sanding depending on the needs of your project, the driven drum allows for sanding of curved work-pieces. Quick sander belt replacement design & track control. To ensure a better experience, we suggest matching with our Y-Fitting Hose
• Sturdy cast aluminum base with rubber foot prevents vibrations. Side Al table can tilt & fix work on both disc & belt
• Two-in-one sanding machine includes both a 4 x 36-inch belt and a 6-inch disc. Angle adjustable work table with miter gauge used on the sanding disc

Product features

Product Infomation:

BUCKTOOL Belt Disc Sander is easy to polish all of the jagged edges and splinters on your wood and lumber and make it smooth. It is an idea for fine wood sanding & polishing.

Powerful motor

This sander was directly driven by a 3/4 HP induction motor, the motor provides enough power for small and large sanding operations on various materials.

Angle Adjustable

Angle adjustable work table with miter gauge can be used on both sanding disc and sanding belt. Sanding belt tilts up to 90 degrees vertical.

Maintenance Free

This sander use no belt, no gear, so you don't have to adjust the cog belt tension, change damage cog belt like before.

Product Infomation:

· 120V, 60HZ, 5.0A

· Disc size: 6 Inch

· Belt size: 4x36 Inch

· Speed: 3450 RPM

· Disc speed: 3450 RPM

· Belt speed : 2165 RPM

Stable base

The sturdy cast aluminum base with two mounting holes and four rubber feet provide low vibration and more stability while operating

Horizontal&Vertical Sanding

The belt can work at the horizontal or vertical position, the big casting aluminum worktable can also be used on the belt side, adjustable from 0-45° degree

Extra Support

A strong metal rod was assembled to support the sanding belt when heavy loading

Directly driven

Sanding belt was directly driven by the 3/4 HP induction motor, 25% sanding efficiency increase than the traditional design.

And no need to worry about replacing the driving belt again!

Product description

Remember when you were the king of the twist? Now you can make your belt oscillate without ever setting foot on a dance floor with the WEN Oscillating Belt and Spindle Sander. Sand arcs, curves, contours, faces and more of even the most strangely shaped workpieces. This versatile machine acts as both a spindle sander and a belt sander, oscillating up to 58 times per minute with a 5/8-inch stroke. This package includes five different spindle sanding sizes (1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch) and one 4 x 24 inch belt. The powerful 3.5 amp motor rotates the various spindles up to 2000 times per minute and the belt up to 1575 feet per minute. Onboard storage helps to organize all of the throat plates, rubber sanding drums and table inserts included with this sander while the 1-1/2 inch dust port allows woodworkers to connect a dust collection system to minimize clean up. Adjust the table anywhere from 0 to 45 degrees to help take on angled edges and surfaces. This sander also comes with six pieces of 80 grit sandpaper: one for the belt and five for each respective size spindle diameter. And because its a WEN Product, your purchase comes backed by a two year warranty, a nationwide network of skilled service technicians and a friendly customer help line. It’s time to shake things up with the WEN Oscillating Belt and Spindle Sander. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.

• Features 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch sanding drum sizes and one 4 x 24 inch belt
• Operate with belt speeds up to 1575 FPM and spindle speeds up to 2000 RPM
• The 3.5-amp motor oscillates the belt and spindle 58 times per minute with a 5/8-inch stroke
• Onboard storage maintains organization of all accessories and sandpapers
• Includes a beveling work table, five throat plates, four rubber sanding drums, one belt sanding attachment and six pieces of 80-grit sandpaper (one for each size spindle/belt)

User questions & answers

Question:	How easy to go from belt to spindle or vice versa? How long does it take
Answer:	About a minute, take the nut off the top and the belt assembly will come off. Then you can install the plate and drum onto the spindle. Note: the drum and belt opinions use two different nuts, they both come with the machine, the down side is that you have to keep up with the one your not using. To my knowledge the rigid brand is the same way.
Question:	mine is Missing the 1" spindle, is there somewhere to get that
Answer:	the little one is the sanding roll only
Question:	Work Table spec
Answer:	Any bench you desire. It is very stable and does not move around. Good buy, use it for all sorts of sanding projects in the shop.
Question:	Can anyone please tell me In what direction does the belt spin? To the left (counter clockwise) or to the right (clockwise
Answer:	In the photo, there is a stop bar on the right side which indicates the belt moves from left to right, counter-clockwise, pushing a work piece int the stop bar. But I don't own one of these.

Product features

WEN 6524 Oscillating Belt and Spindle Sander

Oscillating up to 58 times per minute, the WEN 6524 Oscillating Belt and Spindle Sander includes a beveling work table, four rubber sanding drums, one belt sanding attachment, six pieces of 80-grit sandpaper and five throat plates to give you the best result every time. Woodworking will get a lot easier with the WEN 6524 Oscillating Belt and Spindle Sander.

Arcs, Curves and Contours

You will be able to make faces, arcs, curves, contours and more with the WEN 6524 Oscillating Belt and Spindle Sander. This tool allows you to fix a dust collection system to avoid the mess and help you clean up faster. Even after several projects and application, this sander will certainly go strong as it is built to be durable and efficient.

Product description

Remember when you could sand the finest details of your workpiece? smooth out tight corners and strange contours in wood, metal, plastics and more with the WEN variable speed detailing file sander. The narrow 1/2-by-18-inch belt pivots 55 degrees to meet the particular needs of the project at hand. The auto-tracking design allows for automatic alignment of the sanding belts without the need for any adjustments. Easily switch between grits with the tool-free belt changing system or adjust the variable speed dial for speeds anywhere from 1080 to 1800 feet per minute. This handheld 2-amp belt sander weighs in at a mere 2-1/2 pounds with a compact body for squeezing into tight spaces and awkward angles. Minimize cleanup by hooking the sander up to a dust Collection system of your choice using the included dust port attachment. And, because it’s a WEN product, your WEN variable speed detailing file sander includes three abrasive sanding belts (80, 120, and 320 grit), a two-year warranty and a friendly customer help line all to make sure you remember WEN.

• Variable speed dial powers the belt anywhere from 1080 to 1800 feet per minute
• Auto-tracking belt system requires no tensioning or adjustments.Range of Motion:50°
• Pivot the 1/2-by-18-inch belt up to 55 degrees to meet the needs of any project
• Tool-free belt installation makes for quick and easy belt changes during the job
• Includes three abrasive sanding belts, a dust port attachment and a two-year warranty

User questions & answers

Question:	where can I get more belts
Answer:	Pretty sure you can find replacement belts on Amazon. I have seen them there. I cannot recall the size of the belt offhand (1/2 x 18?) but that is what you would want to search for. The ones I saw were made by another manufacturer.
Question:	Would this help get tough to sand parts of my hardwood floors
Answer:	I was a professional carpenter, served a 4 year apprenticeship, have worked on residential, commercial and industrial projects, including hardwood floor refinishing. I retired from the trade in 1989 (it sure doesn't seem that long ago!). In short, this is a great sander, but it will not work for what you want. Go to a rental store and rent the appropriate equipment. Above all, have a top notch vacuum at your disposal.
Question:	Can the filer handle sanding a small plastic while a very small amount of continuous stream of water is pouring over the sample, for cooling
Answer:	Don't believe the unit is made for water cooling.. Water may be thrown into the motor. You might be better off looking for a different cooling agent. Air for example?
Question:	Any metal workers find the 2amp motor adequate for taking down the occasional weld or brush finishing stainless tube (using good belts of course
Answer:	Yeah, it’ll take a steady diet of weld grinding. I’ve been using 80 grit. Just let the tool do the work without much down pressure. Very good tool..