8 best aleko belt sanders

Product description

Our sanding belts are tough and durable, just what you need to achieve a perfect finish on any surface. They’re made of premium aluminum oxide grain, which is heat resistant and reliable so you won’t have to worry about switching belts in the middle of an important job. Our pads are made for ALEKO brand sanders, but they will fit most popular brands of belt sander, so don’t worry about having the right equipment for the job. And if this grit isn’t exactly what you were looking for, we sell sanding belts with many different grit so you’re sure to find what you’re looking for. Package includes (10) sanding belts. Product dimensions: 3 x 18 inches; 150 grit; Lot of 10.

• ALEKO brand sanding belts use heat-resistant aluminum oxide grain for a matchless sanding experience
• The perfect sandpaper to use on wood, paint, metal, and more
• Will fit on most popular brands of belt sander
• We sell sanding belts in many different grits; if this isn’t exactly what you’re looking for we probably have what you need
• Product dimensions: 3 x 18 inches; 150 grit; Lot of 10

Product description

Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you’ll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you’ll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.

• Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
• Belt tilts anywhere from 0 to 90 degrees
• Sturdy cast iron base prevents any heavy vibrations
• 4.3 Amp motor provides up to 3600 RPM
• Tension release lever provides for simple changes between sandpaper grits

User questions & answers

Question:	Are there finer grits avaialable than the 80 that comes with it
Answer:	You can get belts all the way up to 4000 grit with no problem.
Question:	Which is best all around novice machine, the 6502T or 6500 (both Wen
Answer:	I have the 6502t works like the boss , great product
Question:	Does the unit come assembled
Answer:	Yes, it comes mostly assembled. You have to put on the table for the disk and possibly the disk and belt.
Question:	Could this be used to smooth cut glass bottles
Answer:	You could use any sander as long as you use glass grinding belts

Product features

WEN 4 x 36-Inch Belt Disc Sander

Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you'll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch sanding disc, you'll have the capacity to sand whatever work piece your heart desires.

Heavy-Duty Cast Iron Base

The sturdy cast iron base prevents wobbling and walking, ensuring the sander stays in one place while you're sanding.

Adjustable Belt

Tilt the belt from a horizontal to a vertical position or anywhere in between depending on the needs of your project.

Dust Collection Port

Attach your favorite dust collector to the 2.5-inch dust port to minimize clean-up of saw dust and debris in your workshop.

Table with Miter Gauge

The sanding disc is accompanied by a support table equipped with 0 to 45° beveling capabilities and a removable miter gauge.

• Sanding belt and disc were directly driven by the motor shaft, maintenance-free, you don't have to adjust the belt tension, change damage belt like before
• Motor direct-drive design can increase 25% sanding efficiency than the traditional design. 3/4 HP total enclosed induction motor supplies silent but powerful output
• The belt can work at 0 or 90 degrees depending on the needs of your project, the driven drum allows for sanding of curved work-pieces. Quick sander belt replacement design & humanized track control
• Sturdy cast aluminum base with rubber foot prevents vibrations. 2 dust ports allows a dust-free operation when connecting with a dust collector. To ensure a better experience, we suggest matching with our Y-Fitting Hose
• Two-in-one sanding machine includes both a 4 x 36-inch belt and an 8-inch disc. Angle adjustable work table with miter gauge used on both sanding disc and belt

User questions & answers

Question:	I see in the description this tool is intended for wood, what would happen if metal is used
Answer:	The sanding belt and disc is what is intended for wood. Get a metal sanding belt/disc and you will be good to go!
Question:	What is the country of origin
Answer:	China. But it works well. The only problem is the dust port on the belt sander. It’s next to impossible to plug a vac into it when it’s in the upright position as it’s generally pictured. You have to jury-rig a flexible hose to the sander to which you can attach a vac hose.
Question:	Is the dust port removable
Answer:	The dust ports are fixed on the machine and two universal size reducers( 1-3/8 In O.D) are connected to the outside of the dust ports.
Question:	I wanted this model for sharpening lawnmower blades and wondered,if it will do the job
Answer:	I use a 4x36 with 60 grit zirconia belt to sharpen my mower blades. Iin my opinion it is far superior to the angle grinder and flap disk method, and the hand held on a bench grinder method. It is faster, more precise, and more controllable than those alternates. It leaves the best looking edge I've ever put on a mower blade.

Product features

Are you looking for a versatile and reliable sander?

BUCKTOOL Belt Disc Sander is easy to polish all of the jagged edges and splinters on your wood and lumber and make it smooth. It is an idea for fine wood sanding & polishing.

Powerful motor

This sander was directly driven by a 3/4 HP induction motor, the motor provides enough power for small and large sanding operations on various materials.

Angle Adjustable

Angle adjustable work table with miter gauge can be used on both sanding disc and sanding belt. Sanding belt tilts up to 90 degrees vertical.

Maintenance Free

This sander use no belt, no gear, so you don't have to adjust the cog belt tension, change damage cog belt like before.

Sanding disc protection during shipment

Few customer concern about the wobble of disc, this was 100% controled in factory , but it will deform when facing terrible delivery . We have added a heavy steel cover to protect the disc sander for new delivery after Nov/ 2019 .If you received a machine with wobble disc , pls don't hesitate to send email to us,We will give you a satisfactory service！

Horizontal&Vertical Sanding

The belt can work at the horizontal or vertical position, the belt comes with a large aluminum table which can adjust from 0-45 degrees.

Upgrade two work tables for both disc and belt

10.4 x 5.9-IN Cast Aluminum table tilts from 0 to 45 degrees for disc bevel sanding.

6.3 x 7.5-IN Aluminum table tilts from 0 to 45 degrees for belt bevel sanding.

Directly Driven

Sanding belt was directly driven by the 3/4 HP induction motor, a 25% sanding efficiency increase than the traditional design. And no need to worry about replacing the driving belt again!

Product description

Variable speed control dial matches the speed to the application, auto tracking belt system, sands flush to wall with nose and side of sander, front grip, dust bag. Specs: 120V, only 85dB, ft./min. 690-1,440 , 11-5/8"L, 16.4 ft. power cord, double insulated, weight 9.5 lbs. Includes: #80 abrasive belt, dust bag. Belt width- 3 inches.

Makita's 3 x 21-Inch Belt Sander, model 9903, combines power and speed with ease-of-use features and less noise for fast and efficient stock removal. The 9903 is ideal for woodworkers, carpenters, furniture makers, floor installers, deck builders and general contractors who require a best-in-class belt sander.

The 9903 features a powerful 8.8 AMP motor with electronic speed control to maintain constant speed under load. The variable speed control dial allows the user to match the speed (690-1,440 ft./min.) to the application. The 9903 also features less noise: at only 84dB, it is one of the quietest sanders in its class.

Ease-of-use features include an auto-tracking belt system that tracks the belt without adjustment, and a front grip for comfortable operation. The low profile design provides better balance, and the extended base allows sanding flush to wall with nose and side of sander. The 9903 is easily maneuvered with the long 16.4-foot power cord, and the highly efficient dust collector reduces dust in the work area. An optional sanding shoe is available for precise sanding depth control.

The Makita 9903 is engineered for cabinetry and woodworking, and is ideal for wood panels, furniture, closets, and more. The 9903 is just another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita's Power Tools

Makita delivers precision, accuracy, capacity, and innovation to woodworkers. Makita has full range of miter saws, jig saws, circular saws, routers, planers, sanders, nailers and staplers, blades, compact cordless drills and impacts, and more. Makita's woodworking solutions are engineered for pro contractors, for use in high production settings and in home shops.

About Makita

Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

Warranty

Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.

What's in the Box

Makita 9903 3 x 21-Inch Belt Sander, abrasive belt and dust bag.

• Powerful 8.8 AMP motor; only 85dB
• Variable speed control dial (690-1,440 ft./min.) enables user to match the speed to the application
• Auto-tracking belt system tracks belt without adjustment
• Innovative design for sanding flush to wall with nose and side of sander
• Front grip design for comfortable operation
• Dust bag for a cleaner work environment
• Long 16.4 ft. power cord for easier maneuverability

User questions & answers

Question:	Where can I purchase the sanding shoe that is made to work with the Makita 9903 belt sander
Answer:	Good luck on that. It’s not on their website, so I don’t think they male it anymore.
Question:	What case would fit this sander
Answer:	Yes the rubber hose end can be crammed on. Better is to get the hose and adapter for Bosch sanders as it is much more flexible.
Question:	How well does the dust collection work
Answer:	No, it is 60hz. I looked at the sticker on mine to make sure and it says 60hz only
Question:	Is this belt or gear driven
Answer:	Mine arrived was made in Japan too. but it looked like someone swapped the internal parts. coz the oil was leaking from the belt roller housing and had a lot of saw dust right outta the box. so if you see these signs, send it back! amazon waits until you finds out! otherwise they just sold you a used item for new!update: the second shipment also was used.

Product features

Makita 9903 3" x 21" Belt Sander

Makita’s 3 x 21-Inch Belt Sander, model 9903, combines power and speed with ease-of-use features and less noise for fast and efficient stock removal. The 9903 is ideal for woodworkers, carpenters, furniture makers, floor installers, deck builders and general contractors who require a best-in-class belt sander.

The 9903 features a powerful 8.8 AMP motor with electronic speed control to maintain constant speed under load. The variable speed control dial allows the user to match the speed (690-1,440 ft./min.) to the application. The 9903 also features less noise: at only 84dB, it is one of the quietest sanders in its class.

Product description

6” x 48” Belt / 10” Disc Sander with Stand offers woodworkers the same belt and disc sizes and operating features as the #50-120, but, has a more powerful motor, re-designed base of sturdy, heavy gauge sheet steel, higher positioned disc location, cast aluminum disc table with patented rack & pinion table angle-setting handle system, and it includes a steel stand. • Cast Iron & Steel Construction • Belt Size 6″ x 48″ • Belt Tilts 0 – 90° • 10″ Disc Diameter • Includes: Steel Stand, Work Support Table, Miter Gauge, HEX Wrenches, Convenient Carrying Handles, 1 – 80 Grit Disc and 1 – 80 Grit Belt

• HIGH POWER - This large 1HP motor delivers superior power for driving the sanding belt and disc without stalling.
• BELT AND DISC SANDER - With a 6” x 48” belt and 10” disc this sander from Rikon Tools has the strength and capacity to complete all of the sanding you may need.
• TILTING - The disc table for this sander tilts 0-90 degrees allowing precise sanding of even the sharpest angles.
• ADJUSTABLE - The belt can be adjusted from the horizontal to vertical position for whatever your work needs may be.
• SPEED - This high speed sanding disc can reach the speed of 2510 RPM, and the belt speed maximum is 1836 FPM.

User questions & answers

Question:	What is the size of the disc table
Answer:	No, 120 outlet, 15amp is all it needs. Can use 120 outlet at 20amps but not 220.
Question:	Is this specifically for wood working, or is it worthy of metal working applications
Answer:	Hello Geraldo,Yes, we sell this as a tool / stand set. Good question.
Question:	Will it work on 220 volts of electric power at 50hz frequency
Answer:	There is a backer behind the belt about an inch and a half high just above the lower platform. It is enough to support belt for smaller items. Above that belt is only held by belt tension
Question:	does this item include the stand
Answer:	Companies do make 1"x30" leather belts for it & they change out just like the sanding belts do.

Product description

The SB8V2 variable speed belt sander sands wooden and metallic surfaces, finishes flooring,  prepares surfaces for painting, removes rust and old paint, and finishes masonry materials such as slate and concrete. Power source - Single Phase 120V AC 60 Hz

• INCLUDES: SB8V2 Belt Sander, Sanding Belt, Dust Bag
• MOTOR: 9 amp 1,020-watt motor, forcible power for the toughest sanding jobs
• SPEED CONTROL: Variable speed dial at base of handle for various applications and improved manageability
• GREATER VISABILITY: Clear front cover, improves visibility when sanding up against a surface
• DUST COLLECTION: Dust collection bag reduces airborne particles and keeps the work area clean
• DUST COLLECTION: Left-side mounted dust collection bag improves corner sanding applications while reducing airborne particles to keep work area clean
• WARRANTY: Comes with professional 5-year limited warranty
• DESIGN: Flush surface design allows for quick and even sanding

User questions & answers

Question:	Esta lijadora es apta para corriente 220 porque el enchufe que se ve en la foto es para
Answer:	Esta lijadora solamente funciona con corriente 110-120. Gracias.
Question:	Why does the price keep changing? I have seen this as cheap as $99 and as high as
Answer:	Dont set prices...
Question:	Can you attach a hose/vacuum to remove dust instead of the dust bag
Answer:	The dust exhaust port is 1.25 inches outside diameter so you should be able to use a hose with 1.25 inch inside diameter to fit the exhaust port and remove dust.
Question:	i have a metabo hpt belt sander the cord got sucked into the roller how can i get that out
Answer:	Use the release lever and try and wiggle it out.

Product features

Powerful 9 Amp Motor

9.0 Amp, 1020W motor produces forcible power for the toughest sanding jobs

Variable Speed Dial

Adjusts speed from 820-1,475 ft/min for improved manageability during any operation

Flush Surface Design

Allows for quick and even sanding

Tracking Window

Improves visibility of sanding surface and sanding belt during use

• ❤ Comes with 13pcs sanding belts, 7 x 80 grits, 6 x 120 grits.❤
• ❤How to avoid belt slipping: adjust the screw at the bottom to level your belt at a straight line before working.❤
• 【2 In 1: Bench & Belt Sander】 Provided with two metal screw clamps, TACKLIFE belt sander can be turned over and fixed to table, acting as a bench sander, lock-on button helps to free your hand, providing more convenience and flexibility.
• 【13Pcs Sanding Belts】 Come with 6pcs 120 grits and 7pcs 80 grits aluminum oxide sanding belts, saving your money, meeting the requirements for your different projects. Metal clamping lever for easy and quick sanding belt change.
• 【Power & Variable-Speed Design】5 Amp motor offers great power to the sanding surface, delivering efficient removal and high quality finish. Variable-speed knob with 6 dials enables you to match the best speed to the application from 0-560rpm.
• 【High Performance Dust Collection System】The dust collecting box is detachable, can be easily installed and removed, easy to clean dust. Two vacuum dust adapters, 32mm and 35mm make it possible to connect your vacuum cleaner, reaching the perfect dust collection effect.
• 【Notes & Full Package】When meeting the problem that the belt slipping, adjust the screw at the bottom to a proper position, then the belt will run in track. Full package: TACKLIFE PSFS1A belt sander; 13pcs sanding belts; 2 screw clamps; 2 vacuum adapters; user manual; 2 Year Customer Support.

Product features

Multiple sanding ways are featured by TACKLIFE Belt Sander.

It comes with two clamps to fix the belt sander on the table in vertical or horizontal, which make it work as a bench sander, benefit the sanding of small parts and perform the desired function.

13Pcs Extra Sanding Belt

It not only includes a dust box, but also two 32 / 35mm adapters to connect to a vacuum cleaner.

It comes with 13 Sanding Belts (one in the machine), they satisfy more need of the change of the bends.

Notes:

When install the sanding belt, please keep the arrow on the belt in the same direction of the arrow on the machine, which enables the belt a longer service life and avoids leaving scratches on the board.

Turn the adjustment screw with a hand-held screwdriver as shown in the picture , which is to make sure the belt runs in the same correct position. Otherwise the bend will be broken during work.

To avoid damage to the machine, please do not press the machine hard during sanding.

Product description

Factory Warranties will only be honored if this product is purchased through an Authorized Seller. Ask the seller if they are authorized before purchasing. The Ridgid Lifetime Service Agreement (LSA) is NOT available on any purchases on Amazon.



Product description

Includes 6.5 Amp, 3 in. X 18 in. Heavy Duty VS Belt Sander - ZRR2740, 80-Grit Sanding Belt, Dust Bag, Operator's Manual



From the Manufacturer

Ridgid R2740 Sander, 3-inch x 18-inch Belt has twin fan high efficiency dust collection while one fan cools the motor, the other collects dust resulting in maximum dust pickup efficiency. Soft Grip handles provide increased comfort and decreased vibration, while the 12-foot all rubber cord with cord wrap provides added durability and convenience. Automatic belt tracking automatically adjusts belt to center of platen for alignment. 6.5 amp motor is belt and gear driven for added power and durability. Variable speed dial with electronic feedback matches the speed to the desired removal rate. Electronic feedback helps maintain motor speed under load for consistent results. Flush sanding capability allows for flush sanding against vertical surfaces. Accessible brushes can be serviced quickly for minimum downtime. Tool-free belt release makes changing belts quick and easy. Lighted plug to easily identify live tools. Specifications: Input: 120 V AC, 6.5 Amps, Belt Size: 3 in. x 18 in., Belt Speed (SFPM) 400 - 950 (no load speed), Tool Weight: 5.8 lbs. Includes: R2740 Sander, dust bag 80G sanding belt, and operator's manual.

• This item is SANDER, BELT 3 X 18 R2740 28533
• This product is used for power-detail-sanders
• This product manufacture by China

User questions & answers

Question:	Can this be clamped upside down? Is the top flat enough to be stable when clamped
Answer:	It didn´t fix the problem of my dishwasher
Question:	ridgid r2740 heavy duty variable speed belt sander 3 in. x 18 in case for this? if not why not
Answer:	We had a couple of things we tried. The control board and door switch were what we tried - the control board eventually was what we had to replace. It was pretty straightforward- there are YouTube videos that show how to do it.
Question:	How come its twice as much as the exact same refurbished item on ebay
Answer:	I replaced the board with the circuit power off, per instructions. When I turned it back on, the board started up but stalled again in a minute or so, just like the old one did. When I turned off the circuit and turned it back on, it worked! Been working now for a few weeks with no problem.
Question:	what makes the sanding belt 'walk' off the track? I tried loosening it; I tried tightening it~I still spend more time repositioning than sanding
Answer:	We had to return one as defective. The tech we eventually hired tested it and found it to be defective.
Question:	Does this accept the same pads you would use on a Porter cable sander? I believe they are also
Answer:	Gray
Question:	Does this used item come with sample disks and extension pole, etc
Answer:	gray
Question:	Is this 220V? or 110V
Answer:	Yes you do! Take door off, slide front panel off so clips can be inserted properly otherwise top will not fit snugly and you will break one or more of the tabs. I have yet to do this.
Question:	What is the size of this hose, my wet dry has a 4" hose. Is there an adapter for this
Answer:	No, you need part# W10084141 (or WPW10084141)