3 best power sand blasters

A power sandblaster, also known as a sandblasting machine or power sandblasting tool, is a type of power tool used for abrasive cleaning, surface preparation, and finishing tasks. It uses compressed air or another pressurized gas to propel abrasive materials, such as sand, grit, or glass beads, at high velocity onto a surface to remove rust, paint, corrosion, dirt, or other contaminants. Here are some key features and information about power sandblasters:

  1. Compressed Air or Pressure: Power sandblasters rely on a source of compressed air or gas to create the necessary pressure for propelling abrasive materials. They are often connected to an air compressor capable of delivering the required air pressure.

  2. Abrasive Materials: Various abrasive materials can be used in a power sandblaster, depending on the application. Common abrasives include sand, aluminum oxide, steel grit, glass beads, and walnut shells. The choice of abrasive depends on the surface being treated and the desired finish.

  3. Surface Preparation: Power sandblasting is commonly used for surface preparation tasks, such as removing rust, paint, scale, and contaminants from metal, wood, concrete, and other surfaces. It is a critical step in tasks like repainting, restoring, or refinishing surfaces.

  4. Cleaning Efficiency: Power sandblasters are highly effective at removing stubborn coatings and contaminants, as the abrasive particles can penetrate and clean even hard-to-reach areas. This makes them valuable tools in industries like automotive, construction, and manufacturing.

  5. Safety Equipment: When using a power sandblaster, it is crucial to wear appropriate personal protective equipment (PPE), including safety glasses or goggles, a respirator, ear protection, and protective clothing. The high-velocity abrasive particles can be hazardous if not used safely.

  6. Nozzle and Gun: The sandblasting gun typically has a nozzle at the end that controls the flow and direction of the abrasive material. Users can adjust the nozzle to achieve the desired blasting pattern and pressure.

  7. Dust Collection: Dust and debris are generated during the sandblasting process. Many power sandblasters are equipped with dust collection systems to capture and contain the waste material, making cleanup easier and reducing the risk of environmental contamination.

  8. Portable and Stationary Models: Power sandblasters are available in both portable and stationary models. Portable units are often used for smaller, mobile tasks, while stationary units are suitable for larger, more fixed applications.

  9. Maintenance: Regular maintenance, such as cleaning the nozzle and inspecting hoses and connectors for wear or damage, is essential to keep a power sandblaster in good working condition.

  10. Regulation and Safety: It's important to be aware of local regulations and safety guidelines regarding the use of power sandblasters, as improper use can lead to health and environmental hazards.

In summary, power sandblasters are versatile tools used in various industries for abrasive cleaning and surface preparation. They use compressed air or gas to propel abrasive materials, making them effective for removing coatings, rust, and contaminants from different surfaces.Proper safety precautions and equipment are essential when using these tools due to the potential hazards associated with high-velocity abrasive particles.

Below you can find our editor's choice of the best power sand blasters on the market
  

ALC Keysco 40002 Sand Blaster

ALC Keysco

Based on 16 reviews Check latest price

Product description

OEM Replacement Parts / Equipment

  • Holds approx. 90lbs. of abrasives
  • Blasting Time: 30-45 Minutes
  • Welded Steel Frame
  • Pull up closure for loading of abrasive
  • Handle for moving ease

User questions & answers

Question: What is the maximum cfm. i saw somewhere it's 7 to 125. howevers state 80 cfm. can someone confirm
Answer: The ALC 40002 Pressure Blaster comes with two nozzles. 3/32" & 1/8". It is the size of the nozzle that determines the amount of CFM required. The 3/32" nozzle requires 7 CFM @ 80 psi. The 1/8" nozzle requires 15 CFM @ 80 psi. We also offer four larger nozzles that you can order ranging from 5/32" up to 5/16", and the CFM on the larger nozzles range from 25 CFM @ 80 psi to 125 CFM @ 80 psi. You would use the larger nozzles if you are running coarser abrasive. The nozzle should be 3 to 4 times larger than the size of the grit of the abrasive you are using.
Question: Is it capable to do 23 cfm
Answer: The ALC 40002 Pressure Blaster comes with a 3/32" & a 1/8" nozzle. The 3/32" nozzle requires 7 CFM @ 80 psi. The 1/8" nozzle requires 15 CFM @ 80 psi. We also have four larger nozzles that can be purchased separately. 5/32" nozzle which requires 25 CFM @ 80 psi. 3/16" nozzle which require 40 CFM @ 80 psi, 1/4" nozzle which requires 80 CFM @ 80 psi. 5/16" nozzles which requires 125 CFM @ 80 psi. It is the size of the nozzle that determines the CFM required.
Question: how long is sand blasting hose
Answer: The blast hose is 8 feet long, including the blast nozzle.
Question: Are Replacement tips available
Answer: Replacement tips are available. Contact ALC at 800-253-9726.

Pressure Blaster, 100lb.

ALLSOURCE

Based on 11 reviews Check latest price

Product description

Portable Pressure Blaster, Deadman, Hopper Capacity (Lb.) 100, Tank Dimension (In.) 12 x 27, Steel, Air Pressure (PSI) 80-125, 7 CFM Required @ 80 PSI, Hose Length (Ft.) 8, Abrasive Blasting, Includes 1/8 In. And 5/32 In. Ceramic Nozzle

  • Abrasives & Polishers
  • Made in:United States
  • Manufacturer: Allsource

User questions & answers

Question: Will it work with soda
Answer: The blaster model number 41600 will not work with soda.
Question: Que capacidad de galones tiene el tanque
Answer: el 41600 tiene una capacidad de 90 libras y esto se convierte en aproximadamente 10 galones The 41600 has a 90lb capacity and this converts to approximately 10 gallons
Question: Is the blaster made in the USA
Answer: The 41600 Allsource pressure blaster is made in China.
Question: Can this be used with Corn Cob media
Answer: Yes, you can use corncob media in the pressure blaster. However, you need to take into consideration the size of the nozzle. The nozzle needs to be 3 to 4 times larger than the size of the grit you are using. Also, the larger the nozzle the more CFM (cubic feet per minute) of air is required.

Le Lematec Sand Blaster Gun Kit for All Blasting Projects, Remove Paint, Stain, Rust, Grime on Surfaces and Pool Cleaning

LE LEMATEC

Based on 1 reviews Check latest price
  • sandblasting cabinet
  • Imported
  • The Le Lematec sandblaster is easy to use, and the setup kit comes with a 1/4'' NPT quick connector, user manual, and media guide so you can be on your way to sandblasting quickly.
  • Sandblasting equipment is great for a number of jobs including glass etching, stripping paint, rust, grime, moss, mold, and scale on an automobiles, hot tubs, tile, pools, and other surfaces.
  • The sand blaster pressure washer supports various media like steel grit, glass beads, soda, silicon carbide, aluminum oxide, black diamond, and more.
  • Sandblasting with the gravity feed sandblaster makes sandblasting convenient without being tethered to a siphon hose. Blast in tight spaces or hard to reach areas.
  • We recommend an air compressor that can maintain over 90-150 PSI with a minimum cfm of 4.0 for optimum results. An air compressor inline air filter is needed and not included.

Product features

The Original Handheld Sandblaster Gun Kit

Le Lematec Sand Blaster was designed to outperform, with its gravity fed reservoir, which means more consistent work. This tool has more than enough power to tackle any job around the shop or home, you won’t know what you did without it.

Features a fully adjustable control valve that automates sand flow precisely. Gravity forces the particles into a hardened steel mixing chamber where they are projected through an engineered steel nozzle, a tool for any job.

So blast away the stains, paint, rust, and more.

· Adjustable Sand Flow Steel Nozzle

· Comfort Grip Handle

· Safety Vented Tank

· Extra steel tip

· Rugged enough for any shop, easy for any homeowner

Now with included stainless steel filter cap for precise filling

Only Le Lematec offers the stainless steel filter filter for optimal performance. Easy pour feature for less mess. Remove filter or leave on sand blaster when gun is in operation.. It's totally up to you. The lematec stainless steel filter will eliminate clogged media and sand blaster problems when combined with an in line filter.

Portable and Lightweight

The Le Lematec Sand Baster Portable Speed Blower is a perfect hand-carry air tool you can take anywhere to achieve fine surface finishing you can’t help but smile.

Works Well In Any Holding Position

Use it upright, sideways and when full of media upside down for small sandblasting jobs and you will achieve the same results. Remember to wear face protection when doing sandblasting at all times.

Perfect For Your Work Or Hobby

Glass Etching and stone carving are among the many sandblasting crafts that are becoming trendy. Whether you sandblast for business or personal use, this portable sand blaster is easy to use.

The Ergonomic Portable Sand Blower You Have Been Waiting For

Tired of dealing with all the inconveniences of having two hoses attached to your conventional sand blower as you maneuver your way in and around your shop while you sandblast? What if you can save a huge amount of effort with just holding a sand blower gun, connected to your air compressor, without worrying for another hose that might get tangled up with your materials and parts on your work area? We feel for you and we know the struggle. That is why Le Lematec has designed a Portable Speed Sand Blower that has a special compartment for your abrasive media which eliminates the need to stay close to your abrasive cabinet that limits your movement while you sandblast.

The Le Lematec Sand Blower Portable Speed Blower can help you wash off years of grime, dirt, and paint, and finish your art project fast and easy.

Super Functional Design and Media Support

We know the challenge that every mechanic, carpenter or artist face when sandblasting. Le Lematec introduces its Portable Gravity Feed Speed Blower with a compact design for good grip and media support. The 600 CC / 18oz media container can accept and blast any type of media ranging from sand (up to 100#), Aluminum Oxide, Silicon Carbide, Steel Grit, Glass Beads, and more.

This Portable Sand Blower uses gravity to ease the flow of the media towards the mixing chamber within the sandblast gun and smoothly pushes it towards the nozzle. It operates under 60 – 125 PSI with optimal operation within 90-100 PSI with 12 CFM. This sand blaster is convenient for any type of restoration, cleaning, corrosion prevention and more.

Latest Reviews

View all