13 best duck trim routers

Product description

The M18 Fuel Compact Router combines power, speed and accurate depth adjustments to deliver clean accurate cuts in a variety of materials and applications. The compact router leverages our Powerstate Brushless Motor and Redlink Plus electronics. This delivers the power of corded 1.25 horsepower trim routers and best-in-class 31,000 RPM providing you with power and speed for clean, quality cuts in hard materials.

Compact and Portable

With the M18 Redlithium XC5.0 battery, the cordless compact router cuts up to 250 feet of 3/8-inch roundovers in red-oak, providing you with all-day run time with fewer trips to the charger.

Versatile

The handheld router is equipped with a micro-adjust dial and macro-adjust button, providing you with fast and accurate depth adjustments for highly accurate work. A variable-speed dial with speed from 10,000 to 31,000 RPM gives you control in all applications.

Features

The compact router also features a sturdy 4-inch sub-base plate providing you with stability, and dual-LED lights illuminate your work surface. The M18 FUEL Compact Router is compatible with a plunge base and an offset base (sold separately).

• POWERSTATE BRUSHLESS MOTOR: Power of corded compact routers and higher SPM to complete cuts in hardwoods
• PERFORMANCE: Redlink Plus intelligence ensures maximum performance and protects from overloads, heating and over-discharge. Variable speed dial ranges between 10,000 and 31,000 rpm, providing precise control for clean edges and details
• ADJUSTMENTS: Macro Adjust button allows for fast macro-adjustments and 1.5-inch of adjustable range. Fine adjustment screw allows for precise adjustments beyond 1/64-inch increments
• COMPATIBILITY: Compatible with Milwaukee Plunge base and Offset base attachments (sold separately)
• MILWAUKEE AUTHORIZED DEALER: Includes USA Manufacturer Warranty

User questions & answers

Question:	se debe comprar por separado las baterias y el cargador de baterias
Answer:	Si no incluye cargador ni batería pero es una buena herramienta se lo recomiendo 👌
Question:	Will the router base work with guide bushings
Answer:	It comes with a second, larger base and that one will accept a guide bushing.
Question:	is it possible to use bits with a shank of a larger diameter? Need to use 8mm shank
Answer:	No it is only a 1/4" shank router.
Question:	where is it made
Answer:	China

Product description

The 20V max XR Cordless compact router provides power like a corded compact router while providing the convenience of a cordless tool. The plastic fixed base and dual LED lights help to illuminate the work surface and provide superior bit visibility. This cordless router is equipped with variable speed control for optimal bit speed in each application. The release clamp allows for quick and easy bit and base Change.

• Dual LED lights help illuminate the work surface
• Depth adjustment ring allows for fast and easy height adjustments
• Electronic brake slows the motor down faster after the unit is shut off; Speed 16,000 to 25,500 rpm
• Variable speed dial allows the user to match speed of the router to the application
• Soft start motor with full time electronic feedback allows the motor to maintain speed during cuts

User questions & answers

Question:	What's the equivalent HP? 1.25 or greater
Answer:	1.25HP
Question:	which batteries work with this tool? are they compatible with any stanley / porter cable / black+decker batteries
Answer:	The DCW600B is compatible with the DEWALT 20V battery line. It is not compatible with any other Brand.
Question:	Can you use a flexvolt battery with this
Answer:	Yes. I tried it and works fine with flex volt batteries.
Question:	Can it use 1/4 in bits
Answer:	Yes, we recommend using only 1/4" bits with the DCW600B.

Product description

Corded power meets cordless convenience with the 18V Brushless Compact Router (model XTR01T7, tool only, batteries and charger sold separately). The 18V LXT Router has an efficient Makita BL Brushless Motor for up to 50% longer run time, increased power and speed, and longer tool life. It is compatible with Makita 18V LXT Lithium-Ion batteries (sold separately). The XTR01Z is engineered for a full range of cabinetry and woodworking applications. It has a variable speed control dial (10,000 – 30,000) RPM) to match the speed to the application, with electronic speed control to maintain constant speed under load and soft start feature for smoother startups and better accuracy. Convenience features include the smooth rack-and-pinion fine depth adjustment system for more precise settings, dual L.E.D. lights to illuminate the work surface, and a quick release cam lock system for convenient depth adjustments and base removal/installation. Additional bases and attachments are available (sold separately). For users of corded Makita Compact Routers (models RT0700C, RT0701C), the bases used with these corded routers are fully compatible with the XTR01Z. In addition, the XTR01Z easily connects to Makita vacuum cleaners with the optional dust nozzle for improved dust extraction. It’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside. Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating.

• Makita built Brushless motor delivers faster and more accurate cuts in a variety of materials
• The electronically controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
• Variable speed control dial (10,000 to 30,000 RPM) to match the speed to the application
• Electronic speed control maintains constant speed under load
• On/off button with separate lock button helps prevent accidental startup of the tool for user and work piece protection

User questions & answers

Question:	I see people mentioning old batteries and small batteries but no models. What exact model battery should I be buying for this
Answer:	This trim router works great with the 2 Ah battery. I wouldn't go with anything more unless you like a lot of top heavy weight. The 2 Ah battery makes it a pleasure to use and will easily last as long as it takes to charge your spare. The reason you are buying this is for light weight and convenience. Don't make it heavy and bulky with a big battery. I use the BL1820B battery with this router for edge trimming and other light duty tasks. If you need run it all day long making large cuts, buy a bigger router.
Question:	What Makita part number no i need to order to get the dust extraction shroud for use with the fixed (non-plunge) base
Answer:	see if this helps: 1. Trimmer Guide (122703-7) 2. Tilt Base (195561-4) 3. Offset Base (195562-2) 4. Dust Nozzle - Fixed Base (195559-1) 5. 18V X2 LXT® (36V) HEPA Filter Dry Dust Extractor/Vacuum (XCV04Z)
Question:	Why two wrenches? Also why is there extra collet nut things? Thanks
Answer:	You can either use the button and one wrench or two wrenches. With two wrenches you can get a tighter nut. This can help with certain bits to avoid chatter. If you don't have great hand strength, two wrenches are definitely better. The extra collet is for a different size router bit shank (3/8") which is rare, but my dovetail jig router bit is 3/8" This means I could use this router with that jig. Otherwise I'd have to use a 1/2" shank router with an adapter.
Question:	Can the wired accessories to the cordless be interchangeable
Answer:	I have the corded router, the cordless router and the plunge base that came bundled with the corded model. The plunge base does in fact mount on the cordless router identically. That's all I can confirm for certain, but the two models appear to be machined the same (though the battery compartment does hang out farther from center, interphering with the full extension of the plunge base depth guide bolt, but only at the extreme of the bolt's capacity - if that is explained well)

Product features

Makita XTR01Z 18V LXT Lithium-Ion Brushless Cordless Compact Router, Tool Only

Corded power meets cordless convenience with the 18V LXT Brushless Compact Router (model XTR01Z, tool only, batteries and charger sold separately). The 18V LXT Router has an efficient Makita BL Brushless Motor for up to 50% longer run time, increased power and speed, and longer tool life. It is compatible with Makita 18V LXT Lithium-Ion batteries (sold separately).

Product description

Versatility and Power

This woodworking router allows you to easily switch between fixed- and plunge-base, and has the power of 14 Amps so you can take on more tasks. With soft start technology, the router starts slow and ramps up to provide time to adjust. Plus precise depth adjustments and speed control to maintain optimum RPMS. Ergonomic handles limit vibration and reduce fatigue over long use.



More About This Product:

- 14 Amp, 2. 5 horsepower fixed and plunge router;

- Speed control LCD display;

- Three coarse depth settings and micro-depth adjustment;

- Three LED lights at base of motor;

- Soft start function increases motor speed slowly from 0 to 25, 000 RPM;

- Power-on safety indicator;

- Ergonomic handles and die-cast motor housing;

- Quick-set edge guide screws;

- Vacuum ports can be attached for dust extraction;

- Fixed base depth of cut: 1-3/4 inch;

- Plunge base depth of cut: 2-1/8 inch;

- Includes: 1/2 inch and 1/4 inch collets, collet wrench, clear sub-base, two 1-1/4 inch dust extraction adapters, edge guide, depth adjustment wrench, and chip shields.

• 14 AMP PLUNGE ROUTER— Powerful 14 Amp, 2.5 HP motor includes both fixed and plunge bases for a variety of work.
• SPEED CONTROL LCD DISPLAY— Lets you select the bit type and material for suggested speed settings based on the task at hand.
• ELECTRONIC FEEDBACK— Ensures motor maintains RPM while the material is being routed.
• SOFT START— Provides a safe and controlled start to routing.
• LIVE TOOL INDICATOR— Stay safe and alert with an indicator that lights up when plunge router is connected to power.

User questions & answers

Question:	What size router bit shanks does this use -- 1/4", 1/2" or both
Answer:	To use variable speed control, you should press set, then “+” or “-” directly to choose the cutting speed according various materials of workpieces. Please give us a call if you need additional assistance (1-877-754-5999) - thank you!
Question:	I can't adjust speed control? Press set, toggle +/- signs correct
Answer:	I am not familiar with the GMC table.
Question:	will this work in a GMC router table
Answer:	Mine does accept standard 1/2” and 1/4” router bits.
Question:	Dose this router exsept standard 1/2" and 1/4" shanks whats the deal
Answer:	Yes, it can be used as a jointer. Includes the necessary shims needed to offset the fence on one side,

Product features

Speed Control LCD Display

Lets you select the bit type and material for suggested speed settings based on the task at hand.

Electronic Feedback

Ensures motor maintains RPM while the material is being routed.

Soft Start

Provides a safe and controlled start to routing.

More About This Product

• Collet Size: 1pc 1/4" and 1pc 1/2" collet
• No Load Speed: 10,000-25,000 rpm
• Power: 14 Amps

Product description

Makita's powerful 1-1/4 HP (maximum) Motor Delivers Improved Performance. The variable speed control dial (10,000 - 30,000 RPM) enables user to match the speed to the application. Our smooth rack-and-pinion fine depth adjustment system for more precise settings. It features a slim and ergonomically designed body for increased comfort and control. It has a Quick release cam lock system for easy depth adjustments and base removal/installation The Electronic speed control maintains constant speed under load. It also has a Soft start feature for smooth start-ups. The Fixed base accepts industry standard template guides for convenience. It has a high visibility base design for improved handling and the performance base can be removed quickly to install other bases. The Heavy duty aluminum motor housing engineered for increased durability. The shaft locks for quick and easy bit changes. Its durable flat top design is added for convenience when changing bits. It has a non-marring high-durability base insert for increased work piece protection. It also has Easy-to-read depth scales Uses 1/4" shank router bits Double insulated.

• Variable speed control dial (10,000 to 30,000 RPM) enables user to match the speed to the application
• Smooth rack and pinion fine depth adjustment system for more precise settings
• Slim and ergonomically designed body for increased comfort and control
• Quick release cam lock system for easy depth adjustments and base removal/installation
• Electronic speed control maintains constant speed under load
• Soft start feature for smooth start ups
• Fixed base accepts industry standard template guides for convenience

User questions & answers

Question:	can you set this up for a table router
Answer:	My short answer would be yes. I'm not sure whether there are commercially available tables for it, though. You may have to build one yourself.
Question:	What is the set of drill bits should I buy for this tool. I bought the MLCS 8377 15-Piece Router Bit Set with Carbide-Tipped 1/2-Inch Shanks and are n
Answer:	This is a 1/4" collet router. If you want to use 3/8" (new to me) or 1/2" get a 1/2" router. I've used routers for 45 years. Own a 1/4" and two 1/2" Here's a quick guide: 1/4" router is the most widely useful, can be held in one hand for quick work, your arm doesn't get tired as fast as with a larger router. This one is good for hinge guides and door installs, laminate trimming (laminate trim bits with bearings), round over of the edges of boards or plywood. Makes a neat no slivers edge, get 1/2", 3/4" diameter cove bits (these will make 1/4 and 3/8" from the edge curves) I get these with bearings as well. (If you want less of a curve, use less depth, the curve is not symmetrical--no one will care. This is what I usually grab my 1/4" router for (I've got a Porter Cable 1/4" that's 40 years old. Can't figure out how to take it apart to replace the cord. Rather than a $60 trip to the tool repair I'm thinking of this one, vacuum dust collection is a plus). Shelf dados, usually 1/2 to 3/4" wide, is best done with a more powerful 1/2" router, but you can get by with this with two passes (overlapping) of a 1/2" straight bit. Plunge routing: always use dust collection. Freehand scroll work: 1/8 or 1/4" round bits- I don't do this, others do. If you don't yet have a router, or a specific shop need, get a 1/4". If you think you need one of those $400 router tables: don't. Make your own or buy a jointer. Figuring out how to make a router table will teach you about making jigs (you can make a fence that has finer adjustment than the fanciest most expensive one on the market) Direction of working. There's a correct direction to running a router along the edge of a board. With plywood, pine, fir, spruce, etc.. going the correct way can rip out long splinters. If you first make a very shallow pass in the 'wrong' direction to knock off the edge, then go normal depth in the correct direction, you can avoid this. (I still don't know if I want this router or not. There were 6 opened and reclosed boxes (returns?) at the Home Depot. Why?)
Question:	can it be used for wood doors and frames for hinges
Answer:	Yes, but it is a much better used as router than a door or frame hinge.
Question:	Can I trim my toe nails with it
Answer:	I definitely would use a flush trim bit. A round over or rabbiting bit might be too much. IMO

Product features

Versatile Kit

The 1-1/4 HP Compact Router Kit (model RT0701CX7) delivers performance, versatility and precision in a compact size. With a full 1-1/4 maximum horsepower and a plunge base included in the kit, the RT0701CX7 is engineered for a full range of precision routing applications.

The RT0701CX7 has a powerful 1-1/4 HP (maximum horsepower) motor with a variable speed control dial (10,000-30,000 RPM) that enables the user to match the speed to the application. Additional performance features include electronic speed control to maintain constant speed under load, and soft start feature for smooth start-ups. The RT0701CX7 is double-insulated with a heavy-duty aluminum motor housing for increased durability.

The RT0701CX7 is engineered for precision and includes a smooth rack-and-pinion fine depth adjustment system and easy-to-read depth scales for more precise settings. The quick release cam lock system is designed for easy depth adjustments and base removal/installation, with a high-visibility base design for improved handling and performance.

Additional features include a slim and ergonomic design that weighs only 3.9 lbs., with a durable flat top design for added convenience when changing bits. The base can be removed quickly to install other bases, and the shaft lock is engineered for quick and easy bit changes (uses ¼” shank router bits).

Includes:

The kit includes a plunge base needed for a range of routing applications. The plunge base has a full 0” – 1-3/8” plunge depth capacity, and an easy-to-use fine depth adjustment with 3 preset depth stops. The router accepts industry standard template guides for added versatility.

-1-1/4 Hp* Compact Router (RT0701C).

-1/4" Collet (763637-1).

-Plunge Base (195563-0).

-Straight Guide (164834-6).

-Spanner Wrench (781039-9).

-Spanner Wrench (781011-1).

1 Year - 30 Day Warranty

Every Makita product is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Certain products referenced below have longer warranties. Should any trouble develop during the one-year period, return the Complete product, freight prepaid by user, to one of Makita’s Factory or Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge.

These warranties do not apply to Makita Accessories or where:

Repairs have been made or attempted by others.

Repairs are required because of normal wear and tear. With regard to Pneumatic Nailers, normal wear parts include the following and are not covered under this warranty: piston/driver assemblies, piston stops, driver blades, rubber o-rings, seals, isolators, air filters, and driver belts.

The tool has been abused, misused, improperly maintained or operated. With regard to Pneumatic Nailers, improper operation includes the failure to use clean, dry regulated compressed air and/or air pressures exceeding the maximum indicated on the nailer casting. With regard to Lithium-Ion Tools, improper operation includes the use of a non-genuine or 'knock-off' battery on a Lithium-Ion Tool or Charger. With regard to Laser Instruments, abuse includes liquid damage or physical damage caused by impact.

Alterations have been made to the tool.

In no event shall makita be liable for (a) any indirect, incidental, punitive or consequential damages arising from the sale or use of the products sold under these warranties, or (b) any amount in excess of the amount actually paid to makita for the products sold hereunder. This limitation applies both during and after the terms of the warranty.

Makita disclaims liability for any implied warranties, including implied warranties of 'merchantability' and 'fitness for a specific purpose' after the expiration of any express warranty.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

Product description

The Makita Plunge Base Set (196094-2) is an ideal accessory for Makita's line of compact routers, their 18V LXT Lithium‑Ion Brushless Cordless model XTR01Z and their 1‑1/4 HP Corded model, RT0701C. The Plunge Base features a plunge capacity range of 0 in. to 1-3/8 in. for easy penetration into the work piece. The fine depth adjustment has three preset depth stops for added precision. For added versatility, the Makita Plunge Base accepts industry standard template guides.

• Plunge depth capacity of 1" to 1-3/8" for easy penetration into work piece
• Easy-to-use fine depth adjustment with 3 preset depth stops for added precision
• Conveniently located plunge lock lever for operator convenience
• Removable clear plastic shield engineered to block airborne debris
• Sub-base accepts industry standard template guides for added versatility

User questions & answers

Question:	Will this fit a Craftsman router
Answer:	No, this only fits the makita trim routers
Question:	Does this fit the rf1101 makita router
Answer:	No this is for the MUCH smaller 1/4" handheld trim router RT0700c. The RF1101 is a full sized 1/2 inch router.
Question:	Does this base work with the battery powered Makita router
Answer:	Yes it does.
Question:	Does anyone have/know of a dust nozzle that fits this
Answer:	Makita does: https://www.makitatools.com/products/details/194733-8

Product description

Bosch 1617EVS wood router tool kit 12 amp 2 1/4 Horse power fixed base hand router with 1/4 inch and 1/2 inch collets. Case type: Hard plastic. Double insulated.

Handle a broad range of routing applications with the versatile Bosch 1617EVS Variable-Speed Router. This router kit includes a powerful motor with advanced speed-control technology, a fixed base for upright use or use in a router table, and plenty of high-performance features to help you get a variety of jobs done quickly and accurately.

• 12 Amp router motor - Combines ample power with adjustable speed settings, allowing users to glide along cutlines
• Adjustable speed dial (8000-25,000 RPM). 2 inch sub-base opening
• Fixed base has threaded holes for mounting to router table positioned in common 3-hole pattern
• Now includes RA1161 fixed-base with system for adjusting bit height from above a router table
• Compatible with optional RA1129 template guide adapter set – For easy change of Bosch quick-release template guides and common threaded template guides; Includes RA1126 template guide adapter and RA1100 interface for threaded template guides

User questions & answers

Question:	I have a porter cable 4216 dove tail jig does this work with it or do i need to purchase optional bases with it
Answer:	I am not sure about that but with enough duct tape, screws, epoxy, and good old American ingenuity, anything is possible! Seriously though, i know there are multiple screw holes in the base plate, but whether or not they will line up to your Porter cable jig, i am not entirely sure. I do know this is a great router, its the first one I have owned, but not the first I have used. Plenty of power for bigger bits and smooth precise adjustments, easy to handle and manipulate. Quieter than alot of others I have used.
Question:	Is this router available in Europe in 220 Volt
Answer:	We have just purchased a (GOF 1600 CE) router from Bosch. This router is 220 volts and came with two bases. This router will not operate in a conventional router lift, as the power switch is on the handle and not on the motor. The unit was supplied with two bases, one plunge base and one non plunge base. The non plunge base may be used to mount the router to a table. Is what Bosch needs, is a kit to make the router work in a proper router lift.
Question:	Is it made in USA
Answer:	Thank you for your question. The Bosch 1617EVS router is manufactured in Mexico. Robert Bosch Tool Corporation utilizes a global manufacturing strategy, which incorporates a global network of suppliers with our worldwide manufacturing locations in countries such as Germany, Mexico, Switzerland, China and the United States. Our manufacturing facilities around the globe are all owned and operated by the Bosch Group and maintain the highest quality standards. You can be assured that whatever country your Bosch product was made in, it will be made with the quality you would expect from Bosch.
Question:	With ra1181 table, do you need ra1165 under table base for over table adjustment if buying 1617evs router? description implies it is not needed
Answer:	You do not - need - to buy it. However, you may still want to buy it if you plan to use the router above table. To eliminate the hassle of installing the router’s base which comes with the router (with the two handles) under the router table, and later having to convert it back for non-table use, Bosch offers the optional RA1165 under table Router Base. The RA1165 base (that is sold separately) is designed to be permanently attached your router table, leaving the router base that comes with the router ready for non-table use. Wish other router manufactures got smart and did this too.
Question:	Will this router run on 220-240V power, or only
Answer:	The router requires 110V
Question:	is it made in usa or china
Answer:	No.....Mexico
Question:	What kind of router bits are good for this router ? Or are any compatible
Answer:	This router has both a 1/4" and 1/2" collet so it will accept both size shank bits. I prefer the buy 1/2" shank myself especially in larger bits, they are a little more expensive but seem to run better and last longer. When it comes to brands of router bit Freud is always the first place I shop. I have also had really good success with CMT and Bosch because my local big box store doesn't carry Freud. One thing I will saw about router bits is its always better to buy quality bits they will last for years and produce better results. Amazon has some nice bits sets that come with a lot of common bits that are nice for a person new to the router.
Question:	Can anyone explain the difference between this kit DW618PKB and the DW618PK kit? Are the routers / bases the same
Answer:	They are both the same tools. The only difference is that DW618PK includes a hard plastic case. Whereas, the DW618PKB includes a cloth carrying bag.

Product features

Accuracy

This versatile kit provides all the components necessary for fixed-depth routing.

Top Tier Power

Among the most powerful routers for woodworking at 12-amps, 2.25-horsepower, and 8,000-25,000 RPM.

Versatility

The hand router’s variable speed dial allows you to set the optimal speed

One Button Operation

The power switch is completely dust-sealed for added durability.

• 📏【PRECISE SHAPE DUPLICATION】:Saker Contour Gauge designed for winding pipes, circular frames, ducts and many objects, Ideal for fitting tiles, laminate, carpet, checking dimensions, moulding, etc.Useful tool for operations on car bodies, carpentry and for all kinds of modelling.
• 📏【ADJUSTABLE AND LOCKING FEATURE】:Saker contour guage can adjust the tightness according to your needs. After using the contour ruler for a period of time, you can easily adjust the tightness;Once object has been contoured, lock contour gauge teeth in place for perfect traces every time.
• 📏【GOOD MATERIAL AND PORTABLE】:The contour gauge is made of high quality ABS plastic, high strength, rustproof and durable.
• 📏【ESAY TO USE】:Our contour gauge measures 5 inch&10inch ,can be used to measure the shape of irregular objects，instant template for marking precise tile cuts .You just press the contour gauge on one of the shapes.Trim outline and cut into shape.
• 📏【EXTENSIVE APPLICATION】:Contour gauge is used to locate profiles or edges and accurately transfer to the material to be cut.For any kind of work needs the contour duplication. In woodworking, auto body, auto metal sheet, stainless steel or any job of contour duplication.

User questions & answers

Question:	Can you trace the patten on wood and use a pattern bit to make an exact copy
Answer:	is not provided with the gauge
Question:	Can this shape duplicator be used in house renovation
Answer:	Mine is flush. Works fine.
Question:	what is the core
Answer:	Yes. It is strong enough to dent the wooden shaft and I have never had it shift while marking.
Question:	Depth of impression
Answer:	Brass contains lead...

Product features

ADJUSTABLE

There is a tool in the product packaging, Adjust the appropriate tightness.

LOCKING

Once object has been contoured, lock contour gauge teeth in place for perfect traces every time.

WIDEN

The width of the Saker contour gauge reaches 5.9inch, while the width of the ordinary contour gauge is 3.93inch.

HIGH QUALITY

Saker contour gauge is made of high quality ABS plastic and metal, high strength, rustproof and durable.

HOW To Use Saker Contour Gauge ?

The Saker contour gauge is ideal for measuring moldings for reproduction, duplicating spindles on the lathe, fitting flooring around moldings, copying curves and a variety of other contour matching jobs around the home and shop.

HOW To Use Saker Contour Gauge ?

The Saker contour gauge is ideal for measuring moldings for reproduction, duplicating spindles on the lathe, fitting flooring around moldings, copying curves and a variety of other contour matching jobs around the home and shop.

HOW To Use Saker Contour Gauge ?

The Saker contour gauge is ideal for measuring moldings for reproduction, duplicating spindles on the lathe, fitting flooring around moldings, copying curves and a variety of other contour matching jobs around the home and shop.

HOW To Use Saker Contour Gauge ?

The Saker contour gauge is ideal for measuring moldings for reproduction, duplicating spindles on the lathe, fitting flooring around moldings, copying curves and a variety of other contour matching jobs around the home and shop.

Product description

Remember when you had versatility and power all in the palm of your Hand? Do you fancy chamfers and v-grooves or are you partial towards rabbets and dados? We won't judge. That’ll just be between you and your router. Make intricate patterns in both the exterior and interior of your workpieces with the WEN 15-Amp variable speed plunge router. This versatile machine features a variable speed 15-Amp motor, providing users speeds from 8, 000 to 23, 000 rotations per minute. The 1/2-inch collet includes an additional 1/4-inch adapter, allowing for compatibility with a wide variety of bits. Our soft startup design prevents damage to your workpiece and lengthens the tool’s lifespan. The spring-loaded base features a lock-down knob to turn your plunge router into a fixed router. The intricate depth stop system features a 7-stop turret, a depth adjustment dial that advances the depth stop 5/16 of an inch per quarter turn, and a fine-tune adjustment dial that advances it 1/128 of an inch per quarter turn. The included guide fence lets users rout perfectly straight lines, helping to create dadoes and grooves along the workpiece. This kit comes packed with accessories, including a hard-shelled blow mold carrying case, a 1-1/2 inch dust Collection duct, a bit-changing wrench, a Straight-Edge guide fence, a fence scale, a centering pin for cutting circles, a profile guide for routing edges of curvy workpieces, and a template guide for creating more complex shapes. And, because its a WEN product, your woodworking router comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you stepped your carpentry up a notch? Remember WEN.

• Powerful 15-amp variable speed soft start motor provides speeds from 8, 000 to 23, 000 RPM
• Plunging base locks in downward position for functionality as both a plunge and a fixed Router
• Accepts both 1/4 and 1/2-inch Router bits with a plunge depth of up to 2-3/8 inches
• 7-Stop turret combined with both macro and micro-adjustment dials maximize precision
• Includes a hard-shelled carrying case, a multi-function Straight-edge fence, a template guide, a circle-cutting centering pin, a fence scale, a 1-1/2-inch dust collection duct, and a two-year warranty

User questions & answers

Question:	What is the length of the straight edge guide
Answer:	The length of the straight edge guide is 10 1/2". The two edge guide rods measure 15" long.
Question:	Is it 110 r 220 voltage
Answer:	110
Question:	Can I use it with routing table? Could you recommend one if so
Answer:	I wouldn't recommend using it with a table because it is a plunger router.
Question:	What is the horsepower rating
Answer:	2.5

Product features

7-Stop Turret

Increase or decrease your cutting depth by 1/8 inch increments with the 7-stop rotating turret.

Micro Adjustment

Our fine-tune adjustment dial advances the depth stop 1/128 of an inch per quarter turn.

Variable Speed

Our powerful 15-amp motor provides anywhere from 8,000 to 23,000 rotations per minute.

Two Routers in One

Our spring-loaded base features a lock-down knob to turn your plunge router into a fixed router.

Parallel Guide Fence

Pop on the included parallel guide fence for routing perfectly straight designs.

Versatile Bits

Accepts both 1/4 and 1/2-inch Router bits with a plunge depth of up to 2-3/8 inches.

• Powerful Motor & Variable Speed - 6.5-Amp motor with max horsepower of 1.25 delivers abundant power for a variety of routing and trimming applications; The variable speed control dial (10000-32000 RPM) allows users to choose a more appropriate speed for different materials.
• Precise Operation & Led Lights - Smooth rack-and-pinion depth adjustment system ensures precise operation for a range of cabinetry and woodworking applications; Dual bright LED lights illuminates dark working areas.
• Ergonomic Design & Convenience - Rubber covered handle for comfortable grip;The quick locking system for convenient depth adjustments and base change.
• Durable Housing & Clean Jobsite - The aluminum body and base for long term durability; Dust hood removes dust to leave a clean work space.
• Package Included - 1.25 HP compact router tool with 12.1Ft/3.7m cord, 5 router bits, edge guide, roller guide, dust hood, 3/8” and 1/4” collet, wrench and tool bag.

User questions & answers

Question:	Can this be used to make words on wood planks/signs
Answer:	Yes, you can use it to do that.
Question:	can it go up and down on depth without twisting the base
Answer:	Hi, To adjust the cutting depth, loosen the locking lever and move the tool base up or down as desired by turning the adjusting screw. After adjusting, tighten the locking lever firmly to secure the tool base.
Question:	is there a plunge adapter for this tool
Answer:	Yes, if you need one, please kindly contact Masterworks customer service. Also we will have plunge bases for sell on Amazon next month.
Question:	Can this router cut a sink hole in butcher block
Answer:	Yes, this router cut a sink hole in butcher block, but you have to apply with a router table

Product features

Accurate

Smooth rack-and-pinion fine depth adjustment system.

Comfort

Ergonomically designed body for increased comfort and control.

Led Work Light

Dual LED's ensure maximum visibility in operation.

Variable Speed Operation

Our powerful 6.5-amp motor provides anywhere from 10000-32000 RPM rotations per minute.

Quick Locking System

Enables simple coarse height adjustments and motor release.

Powerful Motor

6.5-Amp motor with max horsepower of 1.25 delivers abundant power.

Accepts 1/4 and 3/8-inch Collets

1/4 and 3/8-inch collets allow for compatibility with a wide variety of bits.

Durability

Heavy duty aluminum motor housing and base for increased durability and stability.

Avid Power 6.5-Amp 1.25 HP Fixed-Base Wood Router

Avid Power 6.5-Amp 1.25 HP wood router tool with fixed base, variable speed, dual LED working lights, edge guide, roller guide and dust hood, is perfect for a variety of routing and trimming applications.

Its smooth rack-and-pinion depth adjustment system provides precise depth adjustment.

Product description

The Bosch 2.25 HP plunge and fixed-base router kit is a versatile kit for a broad range of applications, including precise bit plunging, edge forming, slot cutting, laminate trimming and dovetail cutting. You can also use it with a router table. The kit features a 25, 000 RPM, 12 amp motor that delivers the power needed for smooth routing. Case type: Hard plastic.

Handle a broad range of routing applications with the versatile Bosch 1617EVSPK Plunge and Fixed-Base Variable-Speed Router Kit. This router kit includes a powerful motor with advanced speed control technology, precision bases, and plenty of advanced features to help get a variety of jobs done quickly and accurately.

• Versatile: This versatile kit can be used for a broad range of applications, including precise bit plunging, edge forming, slot cutting, laminate trimming and dovetail cutting; Making it one of the most widely used routers for wood working
• Durability: Aluminum construction makes this one of our most durable wood routers yet with wooden handles on a fixed base and a soft grip handle on a plunge base
• Ease of use: Rounded hardwood handles maximize user control
• Convenient: With the built in constant response circuitry, our 1617EVSPK wood router will maintain a constant speed throughout the cut, so you get cleaner, more accurate results
• Kit contents: Includes a plunge base, fixed base, 1/4 inch and 1/2 inch collet chucks, shaft wrench, collet nut wrench, chip shields and carrying case

User questions & answers

Question:	Why buy this one over the Dewalt 2.25hp kit? The Dewalt is $40 more, and usually Bosch is more expensive than Dewalt
Answer:	Hi, Peter. Thank you for your question about GoodSense Tussin DM. This product does not contain alcohol. If you would like additional information, please let us know and we would be happy to further assist you.
Question:	I read in one of the reviews, (current review) this router comes with a kit including carrying case, circle jig and an edge guide. Is this correct
Answer:	Yes, it can be shipped anywhere -- I think.
Question:	Is this product compatible with the bosch router table
Answer:	It is a two pack
Question:	if i were to mount this to a table, does this router provide a height adjustment from above the router table
Answer:	it depends what your description of natural is. None the less its tastes like any typical cold syrup medicine although i would recommend to go with the cherry or berry flavor they work just as well with out the bad taste. The original flavor can be harsh especially for kids and young adults.

Product features

Bosch 12 Amp 2-1/4 Combination Horsepower Plunge and Fixed Base Variable Speed Router Kit 1617EVSPK with 1/4-Inch and 1/2-Inch Collets

Variable speed dial, soft-start, maintains constant speed under load, quick clamp system on both bases, includes fixed base with system for adjusting bit height from above a router table, precision centering makes it easy to keep bit on intended cutline when using jigs, templates, dovetail fixtures and similar guidance devices, fixed base has threaded holes for mounting to router table positioned in Bosch 4-hole pattern and common 3-hole pattern, microfine, bit, depth adjustment system on both bases, wide base openings and 2" sub-base openings and provides better visibility, right or left.

Top tier Power

Among the most powerful routers for woodworking at 12-amps, 2.25-horsepower, and 8,000-25,000 RPM. The wood router’s advanced speed-control technology monitors and maintains desired RPM for consistent performance.

Flexibility

The hand router’s variable speed dial allows you to set the optimal speed for the routing task and material. Base Diameter: 6 inches Fixed/ 6-11/16 inches. Rounded hardwood handles maximize user control.

Durable and Comfortable

The motor housing and bases are made of aluminum, and the power switch is completely dust-sealed for added durability. This router is backed by a one-year limited warranty, 30-day money-back guarantee, and one-year service protection plan.

Accurate

This versatile kit provides all the components necessary for fixed-depth routing. Microfine bit-depth adjustment on the base, with an overall range of one inch and accuracy to 1/64 inch, allows for accurate and fast changes.

Product description

The 2-1/4 Peak HP Fixed/Plunge Base Router Kit - KM12VC is made for fine groove cutting, chamfering, window cutting, trimming, shaping and cutting patterns. Featuring Metabo HPT's ergonomic styling and designed for precision, this router kit would be a welcomed addition to any workshop.

• MOTOR: 11 amp motor (2-1/4 peak horsepower) for precise, controlled cuts
• DEPTH ADJUSTMENT: 2-Stage motor release clamp for quick and accurate depth adjustments and base changes
• FINE DEPTH ADJUSTMENT: Fine depth adjustment (plunge base) for precise depth control
• LOW NOISE: Class leading noise level, only 79.5 dB for quieter workshop
• SPEED CONTROL: Electronic speed control, maintains constant RPM even as load varies
• APPLICATIONS: Fine groove cutting, chamfering, window cutting, trimming, shaping and cutting patterns
• ERGONIC DESIGN: Ergonomic styling and designed for precision and comfort

User questions & answers

Question:	What is the difference between the metabo hpt km12vc & the hitachi km12vc --- just the name
Answer:	Nothing at all as far as I know. Hitachi sold to Metabo so they just changed the name. Mine has been a good one
Question:	Does Amazon sell a router table plate for this Metabo
Answer:	Your router table should have appropriate accommodations to mount this router to it. The table plate and attachment mechanism is specific to the table, not the router.
Question:	Will this fit the kreg prs5000 precision router lift
Answer:	Check with Kreg
Question:	Is a case included with the router
Answer:	yes.

Product features

Router Adjustment

Whether you’re adjusting the depth or changing bases, the 2-stage motor release clamp makes the process quick and accurate

Router Motor

11 Amp motor (2-1/4 Peak Horsepower), for precise, controlled cuts

Router Applications

Great for fine groove cutting, chamfering, window cutting, trimming shaping and cutting patterns

Product description

The Bosch GKF125CEPK Colt 1.25 HP (max) variable-speed palm router combination kit pairs a tool that lets you feel the power in your hand with a fixed base and a plunge base. The GKF125CE has an ergonomic palm-grip design with soft-grip. It has ample power, with a 1.25 HP (max) rating. Far more than a laminate Trimmer, it is the ideal tool for rounding-over railings, hinge Mortising, decorative edge forming and more, As well as laminate trimming. The motor features soft-start circuitry, a variable-speed dial and constant response circuitry. Its fixed base features macro- and micro-fine depth adjustment and a centerable round subbase. The plunge base features a precision centering design to keep the bit on the cut line, as well as a Spring-Lock plunge lever depth rod with fine adjustment. The quick-clamp system allow user to move the motor to move from base to base. The kit includes Straight-Edge guide and a carrying case.

• Robust variable-speed palm Router construction – Made to provide precision and power with a 1.25 horsepower (max.) Motor, advanced electronics, high-performance bases & Proven ergonomics
• Powerful 1.25 HP (max), 7.0 amp motor – delivers abundant power for routing and trimming applications
• Ground-breaking fixed-base depth-adjustment system – ensures precise depth adjustment
• Rugged fixed base 360° (non-split) aluminum base housing with wide-bit capacity — Accepts bits up to 1-5/16 in. Wide
• Smooth-action plunge base – provides a spring-lock plunge control lever for easy plunge action

User questions & answers

Question:	Can it be mounted to a table
Answer:	No, the GKF125CEPK includes a colt router, which is tool small to be mounted on a router table. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Can this case be purchased separately? Been unable to find one
Answer:	Better to find in the ebay, I think some will not want this case and want to sell.
Question:	Comes with the P102 straight edge guide, but I have not seen the adaptor or mounting hardward to attach it to the router in my box
Answer:	I found mine in the lid of the box. It had slipped in the holes in the lid.
Question:	Does it accept template guide adapter
Answer:	The GKF125CEPK needs PR110 Subbase for a threaded Template Guide. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

Accurate and Sharp

The Bosch GKF125CEPK Colt 1.25 HP (Max) Variable-Speed Palm Router Combination Kit can seamlessly be applied in various applications, displaying top performance. With utmost accuracy, you will be able to experience this precision-machined and adjustable router that allows a variable speed range.

Helps Guide Accurate and Clean Work

The Bosch GKF125CEPK Colt 1.25 HP (Max) Variable-Speed Palm Router Combination Kit features an ergonomic palm-grip design with soft-grip. The motor features soft-start circuitry, a variable-speed dial and constant response circuitry. The kit includes a Straight-Edge guide and a carrying case, making it super convenient to carry along.