14 best dewalt drill machine

Product description

The DEWALT DCD771C2 20 Volt MAX Lithium Ion compact drill driver has a lightweight design with a high performance motor that delivers 300 unit watts of power. The high speed transmission delivers 2 speeds 0 450 RPMs and 0 1500 RPMs. The ergonomic handle allows comfort and control. The tools weighs 3.6 pounds and contains 2 20 volt MAX compact Lithium ion battery packs, a compact charger and durable contractor bag. Chuck type - Keyless.

• Compact, lightweight design fits into tight areas
• High performance motor delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
• High speed transmission delivers 2 speeds (0 450 and 1,500 rpm) for a range of fastening and drilling applications. Chuck type: Keyless
• 1/2 inches single sleeve ratcheting chuck provides tight bit gripping strength
• Ergonomic handle delivers comfort and control. Tool width: 1.9 inch
• Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. Battery capacity: 1.3 ampere hour

User questions & answers

Question:	can it drill 1/4 holes into plastic
Answer:	----Its not the drill, It's the BIT ----Hanson makes particular bits for drilling plastic, with any drill regardless of voltage, and theyre available most any good hardware store or Tap Plastics. They have a particularly pointed tip, so don't ever attempt to ever use them on wood or metal, as doing so would render it crapp for plastic use from then on. I have 1/8, 3/16, and 1/4 in my arsenal, and they pretty much cover any plastic, ABS, PVC, and especially Plexi-Glas projects I encounter. Yeah, they're a buck or two higher than regular bits, but they also wont crack your pretty plexi-glas project all to hell like a standard twist drill bit will.
Question:	Does this drill have a built in LED light
Answer:	Yes, it has a light. But it's worse than useless. It lights the area nearby, but casts a shadow on the spot you are drilling. The glare makes it actually harder to see what you're doing.
Question:	Would you recommend this drill over the DEWALT DC970K-2 18-Volt Drill/Driver Kit (http://www.amazon.com/dp/B002RLR0EY)? If so, why
Answer:	I had an oportunity to use the 18V when I installed the railings on my father in laws staircase. I worked absolutely great but I had to keep switching batteries and kept one on the charger. He got it last Christmas. I told myself then the Dewalt was far superior to the two brands of portable drills I was using that I was going to get a Dewalt for myself. Honestly, when I ordered the 20V I assumed it was the same as my father in law had but his was the 18V. I would be happy with either but the 20V I have is smaller in size and lighter than the 18V that he has. Plus the 20V lithium batteries last a long long time before you have to recharge but then again replacement batteries are expensive. I just used the 20V to build my garage and so far I've only swithed batteries 5 times and that includes all the siding, drywall, wire routing. BTW I use the new star bit screws for everything they are far superior to phillips and I have given all my boxes of phillips screws away; along with my two "other brand" cordless drills.
Question:	Does this unit come with one or two batteries
Answer:	As of March 22, 2020 the Description clearly says it comes with two batteries... "...The tools weighs 3.6 pounds and contains 2 20 volt Max compact Lithium ion battery packs "

Product features

20V Max Lithium Ion Compact Drill/Driver Kit

The DCD771C2 20V Max Lithium Ion Compact Drill/Driver Kit is lightweight and compact for working in tight spaces for long periods of time. High-speed transmission delivers 2-Speed variations allowing users to choose the level of performance needed for various applications.

• Compact, lightweight design fits into tight areas
• High performance motor delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
• High speed transmission delivers 2 speeds (0-450 & 1,500 rpm) for a range of fastening and drilling applications
• 10x Magnetic Screw Lock
• Reduces breakage and longer life
• FlexTorq allows bits to flex up to 15 degrees

User questions & answers

Question:	Does this come with the extra battery, charger, case and 40 pcs bit set
Answer:	Total 8 legs (4 long and 4 short)

Product features

DEWALT 20V MAX Cordless Drill / Driver Kit, Compact, 1/2-Inch (DCD771C2)

The DCD771C2 20V MAX Lithium Ion Compact Drill/Driver Kit is lightweight and compact for working in tight spaces for long periods of time. High-speed transmission delivers 2-Speed variations allowing users to choose the level of performance needed for various applications.

• Compact, lightweight design fits into tight areas
• High performance motor delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
• High speed transmission delivers two speeds (0-450 & 1,500 rpm) for a range of fastening and drilling applications
• 1/2" single sleeve ratcheting chuck provides tight bit gripping strength
• Ergonomic handle delivers comfort and control

FlexTorq, 40-Piece (DWA2T40IR)

IOur FlexTorq IMPACT READY accessories now come in ToughCase+ system, the latest addition to our accessory storage line. The ToughCase+ system is a connectable case system designed to optimize storage space and keep your bits organized. The bit-bar design allows for easy bit removal and the clear lid allows you to see inside at a glance. FlexTorq IMPACT READY accessories deliver exceptional performance for extreme torque applications. FlexTorq bits feature an Extended FlexTorq Zone to transfer optimal torque in hard joint applications, providing durability & longer life. The bit tip is CNC machined for a precise fit, reducing cam-out under torque.

• Connectable accessory storage system to optimize storage space
• Patented bit-bar design allows easy removal of bits and customizable placement
• Clear lid allows you to easily see contents at glance
• Clip latch for secure closing
• Extended FlexTorq Zone transfers optimal torque
• Magnetic Screw Lock sleeve minimizes drops & reduces wobbles

Product description

The DEWALT DCK240C2 20v Lithium Drill Driver/Impact Combo Kit (1.5Ah) is comprised of the DCF885 20V MAX Lithium-Ion 1/4 inch Impact Driver which is compact (5.55" front to back) and lightweight (2.8 lbs.), designed to fit into tight areas. This unit offers one-handed loading 1/4" hex chuck accepts 1" bit tips, and also features a 3 LED light ring with 20 second delay to provide visibility without shadows. A belt hook is also included for portability on the worksite. The DCD771C2 20V MAX Lithium-Ion Compact Drill/Driver is also compact and lightweight, designed to fit into tight areas. This drill/driver offers a high performance motor that delivers 300 unit watts out (UWO) of power ability, which allows for a wide range of applications. This unit also features a high speed transmission that delivers 2 speeds (0-450 and 1,500 rpm) for a range of fastening and drilling applications. The 1/2" single sleeve ratcheting chuck provides tight bit gripping strength, and the ergonomic handle delivers comfort and control. Both tools are part of the DEWALT 20-Volt MAX system and are compatible with all 20-Volt MAX batteries, chargers and accessories. Includes: DCF885 20v MAX Lithium Impact Driver, and DCD771 20v MAX Lithium Drill/Driver, 20-Volt MAX lithium-ion 1.5Ah battery packs, 20-Volt MAX charger and contractor bag.

• Ergonomic Design: Lightweight tools designed to fit the user’s needs
• Increased Visibility: The DCF885 features a built in Led with 20 second delay after trigger release
• Includes: DCD771 drill/driver, DCF885 1/4 inches impact driver, 20V MAX Lithium Ion 1.3 Ah battery packs, 20 volt MAX charger, and kit bag
• 1 Handed Bit Loading: The DCF885 has a 1/4 inches hex chuck and accepts 1 inches bit tips, Power Tool Type: Cordless
• High Performance Motor: The DCD771 delivers 300 Unit Watts Out (UWO) of power ability completing a wide range of applications

User questions & answers

Question:	Hello from pensacola florida my question is can this thing take off a tire if not can you point me to on that dose thanks
Answer:	In the shop I use my 3/8 impact wrench from dewalt with a 20v 5ah battery and i can go almost 2 days before having to charge my battery and i use it for almost everything. It will take off tires, pull headbolts, engine mounts, t-case bolts, and so on. I would recommend if you're working on your vehicle getting the impact wrench with impact sockets. I put about $500 into what i use and it hasn't let me down yet in almost 4 years. With the wrench you won't need the adapter from screw bit to socket so that will save you a headache if you loose it.
Question:	How many inch pounds will this impact driver provide
Answer:	This impact has almost 1500 in-lbs of torque. Very good impact and you can beat the hell out of them they definitely last.
Question:	Does it come with 2 batteries
Answer:	Yes it comes with two batteries
Question:	Does the drill have a hammer setting
Answer:	The drill combo with the hammer setting is DCK299. However, I will say I thought I needed a hammer drill, it turns out it’s useless. An impact drill gives pulses of force laterally (in the direction of rotation) to turn big bolts, a hammerdrill delivers the same force forward. It turns out that this force is so minimal it’s basically useless. If you actually need a hammer drill what you really need is a rotary hammer. Much greater forward bang. A hammer drill is a bit like a vibrating razor. Only useful in masonry and then it goes just as fast without.

Product features

20V MAX* Compact Drill/Driver

Has an ergonomic handle and one-handed loading 1/4-in. hex chuck that accepts 1-in. bit tips.

20V MAX* 1/4-in. Impact Driver

Compact for fitting in tight spaces and increasing productivity. Three LED lights make it ideal for working in the dark.

Product description

The DEWALT DWE1622K 2" 2-Speed Magnetic Drill Press features a 10 amp motor with 2-speed settings that provide optimal performance in a variety of applications. This press has overload protection electronics which prevent motor damage and excess accessory wear designed for long life. A Quick Change chuck system allows for tool free change between 3/4" Weldon Shank and 1/2" keyed chuck, and the Quick Release feed handles provide tool free change of handles to either side of the tool. The magnetic self feed cooling tank allows the user to regulate the flow of cooling fluid and can be placed on either side of tool or on a work surface to allow for a variety of tool orientations. 4" Drill travel offers maximum capacity for heavy duty applications, along with a motor height adjustment that gives greater range of accessory compatibility. Includes: DWE1622 Drill Press, Safety chain, and Height adjustment tool, Quick change 1/2-in keyed chuck, Kit box

• 10 amp motor, 2-speed settingsl ;No Load Speed : 300/450 rpm
• Overload protection electronics which prevent motor damage
• Quick Change chuck system. Drillpoint Pressure @ 1/2" Steel Plate (12mm) : 741 pounds
• Magnetic coolant bottle can be placed on either side of tool or on a work surface
• 4-3/8 inch Drill travel offers maximum capacity for heavy duty applications

User questions & answers

Question:	What's the biggest hole I caught make with this drill
Answer:	I have this tablet mount. I use it daily, in my Chevy Silverado. I use it for my iPad Pro12”. It works great. Maps at a glance. Hands free....
Question:	what is the max cutting diameter
Answer:	Hi Joe, Thank you for Contacting us. No, it does not have a 17mm ball mount. It has a 25mm ball to 2t adapter.
Question:	Does it have a reverse speed? If not, do you have a different Drill with reverse speed
Answer:	No, it does not
Question:	How loud is it? Say I was drilling into a safe and didn't want anyone to hear me, Hypothetically
Answer:	No, it does not

Product description

DEWALT DCH273P2 20v Max Brushless 1-inch SDS Rotary Hammer with Batteries features a DEWALT brushless motor for extended runtime and durability, and includes 20v Max 5.0ah batteries so there is no user downtime. It also offers Active Vibration Control which significantly reduces vibration and increases user comfort and productivity; a Perform and Protect feature from DEWALT. This rotary hammer gives 2.1 Joules impact energy which provides corded power without the cord. It also has a retractable utility hook for convenient hanging and storage. Includes: DCB205 5.0ah Batteries, DCB101 Charger, 360 Degree Side Handle, Depth Rod, Retractable Utility Hook.

• Brushless motor for extended runtime and durability
• Active Vibration Control which significantly reduces vibration
• 2.1 Joules impact energy which provides corded power without the cord
• Retractable utility hook for convenient hanging and storage
• Includes 20v Max 5.0ah batteries

User questions & answers

Question:	Are these new in box, not recon's
Answer:	It comes with the case, driver bits and the charger. You get one battery.
Question:	does it have enough power to drive a 8foot grounding rod in the ground
Answer:	It should? We have a 10" tablet it's also adjustable, we use it in our sxs and holds tight even going down the trails!
Question:	Is there enough room inside the case for a set of long drill bits? Thanks
Answer:	Yes, the 12.9 Ipad would fit the mount, but not sure of the case.
Question:	Is this a good drill for setting rock climbing bolts
Answer:	No.

Product description

The DEWALT DCD791B 20V MAX XR Li-Ion 1/2" Brushless Compact Drill/Driver (Tool Only) features a DEWALT brushless motor which delivers up to 57% more run time over brushed. This unit is compact (6.9" front to back), and lightweight (3.4 lb.), designed to fit into tight areas. A high speed transmission with 2-speed settings (0-550/0-2,000 RPM) delivers up to 30% faster application speeds, with an ergonomic comfort grip handle that provides ideal balance & tool control. The metal 1/2" ratcheting chuck allows for superior bit gripping strength. This drill also offers a 3-Mode LED that provides lighting in dark or confined spaces (up to 20X brighter than previous model), with a LED Spotlight mode that features 20 minute shutoff function allowing for extended work time in dark or confined spaces. Includes belt hook. This is a bare tool item - battery sold separately.

• Dewalt Brushless Motor which delivers up to 57 percent more run time
• Compact, Lightweight Design for tight spaces
• High speed transmission with 2 speed settings
• 3 Mode LED lights with a spotlight mode
• Battery and charger sold separately
• Maximum initial battery voltage (measured without a workload) is 20 volts; Nominal voltage is 18
• MAX Power: 460 UWO

User questions & answers

Question:	whats does type 1 vs type 2 mean on the side of the drill
Answer:	From the Dewalt website: The type number identifies the multiple versions of a specific model number. As it relates to service parts, a type 1 can be completely different than the type 2 version of a particular model number. The type number can and usually is as important to know as the model number in order to ensure you receive the correct service part(s). Every model number can have multiple type numbers or a little as no type number.
Question:	does this drill have a hammer setting
Answer:	Nope
Question:	Will the 20 volt li-ion dewalt battery interchange with b&d 20volt li-ion batery
Answer:	DeWalt is built by Black and Decker. The old style batteries were interchangable but the new 20 volt batteries have different tabs to prevent this. They do this to prevent people from buying a $20 black and decker battery and using it on all DeWalt tools. This forces people to buy the more expensive DeWalt battery if they have DeWalt tools.
Question:	Can this go in there
Answer:	Obviously this question was posed by someone who doesn't have an a native command of the English language, so in trying to understand the question, I think the question is "Does this tool come with the battery?". That's what is meant by the question "can this go in there?". That's my guess anyway. So, to answer the question, no, it doesn't come with the battery. It's a bare tool only, so no, it won't work without you buying a battery separately.

Product features

DCD791B

The DCD791B 20V MAX* XR Li-Ion Compact Brushless Drill/Driver is lightweight and compact for working in tight spaces for long periods of time. High-speed transmission delivers 2 speed variations allowing users to choose the level of performance needed for various applications. Comfort grip adds balance and control.

Product description

The D25263K 1-1/8-inch D-Handle SDS Rotary Hammer with SHOCKS offers 3 Joules of impact energy for fast drilling and chipping speed. It has a 8.5 Amp high performance motor for all your needs, and also features SHOCKS active vibration control and regulation, resulting in reduced vibration felt in the handles - a Perform & Protect feature. This Rotary Hammer has a rotating brush ring which delivers full speed/torque in forward and reverse, along with an integral clutch that reduces sudden, high torque reactions if bit jams. Includes: Rotary Hammer, 360 Side Handle, Depth Rod, Kit Box.

• 3 Joules of impact energy
• 8.5 Amp high performance motor
• SHOCKS - Active Vibration Control, reduced vibration felt in the handles. A Perform & Protect feature
• Integral clutch reduces sudden, high torque reactions
• Rotating brush ring delivers full speed/torque in forward and reverse

User questions & answers

Question:	No torque rating? Does anyone know the torque rating or max hole saw size in wood and steel
Answer:	I don't know that I would use it for wood, though I guess you could. It can be set to drill, to jack hammer, or to drill and jackhammer combined. Also, don't know about torque, but I found it to be sufficient for all applications I've tried it in. It is surprisingly powerful and durable for a snall handheld unit.
Question:	Does this have a 3rd setting to drill w/o hammer option so can core drill
Answer:	It has 3 options: 1: drill without hammer, only spining, 2: drill with hammer, 3: hammer only for chisel. No spinning...
Question:	Does this unit have the option of variable positions for chisel bit
Answer:	Yes, it can lock in position either horizontally or vertically, as I have used it in both positions. It may lock in other angles, but I have not tried it in angles other than parallel or perpendicular to the handle. I also will mention that this unit has performed admirably and I have absolutely no regrets with my purchase. I was able to remove old tile (put down in the 1950's with thick-set. I found it works best at lower speeds and sharp angles of attack. Take your time and you won't work up any sweat, letting the tool do the work. Hope this helps.
Question:	How do you place the drill bit in the hammer drill, I have been working on this task for a few hours,it do not grip the bits at all
Answer:	This drill does require the special SDS carbide drill bits that have three slots in the shank. I pull the nose piece back and press a little on the bit and it will slip into the drill. I then rotate the bit to ensure that it is locked into place. The slots in the SDS drill bits allows then to transfer the drills hammer action to the drill point. With this drill only bits that are marked SDS Plus will work.

Product description

20V, Max, Lithium Ion Brushless Compact Drill Driver, Compact Lightweight Design, High Performance Motor Delivers 340W Out of Power, with 75 percent more runtime with Lithium Ion batteries, High Speed Transmission Delivers 2 Speeds, with No Load speed of 0 50 & 1,750 Rpm, 1/2" Single Sleeve Ratcheting Chuck, Includes: Two 20V Max Compact Lithium Ion Battery Packs, Compact Charger & Contractor Bag. Chuck Type Plastic Ratcheting

• Brushless Motor: Longer Motor life and 30 percent more runtime than brushed
• INCREASED VISIBILITY: Has built in LED with 20 second delay after trigger release
• Ergonomic Design : Compact (752 in front to back) and Lightweight (2.6 pounds) Design fits into tight areas
• COMFORT GRIP HANDLE: Provides ideal balance and tool Control
• Includes: DCD777 Compact Brushless Drill/Driver, Li ion Batteries, Charger, and Kit Bag

User questions & answers

Question:	Does this have a battery life meter on it
Answer:	It does not have a battery life meter. It does come with two batteries so it's not to big of an issue.
Question:	How long does battery last
Answer:	Batteries that come with unit are small but very light, excellent for my usage. DeWalt sells these 20v packs in 3 different capacities these are the smallest ones. How long they last is a HUGE variable based on what the task is so that will be impossible to determine for someone else. In my experience these small ones last about the same as the 18v Ni-Cad Dewalt system (18 yrs old) I replaced with this set.
Question:	Why do two Lithium ion batteries go for $170. and the kit with two batteries a charger the carry case and the drill go for
Answer:	it depends what batteries you're looking for. The batteries are where dewalt is making the real money (other than china vs us made power tools) This kit comes with 1.3AH batteries, I believe these are the smallest batteries offered. Think of them like gallons of gas. 1.3 isn't going to go as far as the 6.0AH. When dewalt adds in other stupid options like Bluetooth, it jacks up the cost. Unless you're a contractor running drills all day, these two batteries should keep your project moving along.
Question:	So is brushless better than the regular DW drill
Answer:	Yes. First off, it is more efficient than brush-ed. When you run it with a light load, it draws less power. Dewalt says you get up to 30% more runtime from the same charge. The better efficiency is a fact, and the 30% is possibly conservative. There is a youtube video of a guy drilling 1/2" holes into a board with a brushless and a traditional dewalt drill, and the brushless wins 2 to 1. it drills some 190 holes vs the brushed just 92. The second advantage: there are no brushes to wear out and replace. TBT I have many brush-ed tools and as a DIY-er I never had to replace the brushes on any of them, but this may be an advantage to a pro or heavy user. A third advantage, the tool can be built more compact, or more powerful (given the same size)The only advantage of the "brush equipped" design:that it is simpler. The brushless changes the direction of the Dc current using electronics instead of a mechanical commutator, so that is an extra source of possible failure

Product features

20V Max Lithium Ion Compact Drill/Driver Kit

The DCD777C2 20V Max Lithium Ion Compact Drill/Driver Kit is lightweight and compact for working in tight spaces for long periods of time. High-speed transmission delivers 2-Speed variations allowing users to choose the level of performance needed for various applications.

Product description

This 20V max compact Brushless drill/driver kit includes two 20V max* Lithium Ion batteries, a charger, and a carrying bag. At only 6. 3 in. Front to back, This drill features a high performance Brushless motor that delivers 340 unit watts outs (UWO) and LED light to provide optimum illumination in dark spaces as you work. For increased comfort, The handle features an ergonomic design for balance and easier tool control along with a removable belt hook. Backed by a DEWALT 3-year limited so you can buy with confidence.

• Led foot light for superior visibility
• Variable speed trigger allows for control and precision on delicate work surfaces
• Dewalt built Brushless Motor for efficient performance and runtime
• 1/2 inch; Ratcheting chuck provides superior built gripping strength
• 340 UWO of power to help get the job done

User questions & answers

Question:	if some 1 converts U-W-O what is the in/lbs of torque of this drill
Answer:	The torque is 575 in-lbs.
Question:	Is this a drill and hammer drill
Answer:	No, this is a drill driver only.
Question:	the charger is to connect to 220v or 110v
Answer:	The charger uses 110V.
Question:	Can the charger be used with 240V power supply
Answer:	No, the DCD708C2 is rated for use with 110V-120V current.

Product description

DEWALT DCD996B 20V MAX* XR Lithium Ion Brushless 3-Speed Hammer drill - Bare tool features a DEWALT-built high power, high efficiency brushless motor that delivers up to 57% more run time over brushed. This hammer drill has a heavy-duty 1/2" ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength. The 3-Mode LED light provides illumination in dark or confined spaces up to 20X brighter than previous model, with an LED Spotlight mode with a 20 minute shutoff function allowing for extended work time in dark or confined spaces. A 3-speed, all-metal high performance transmission optimizes tool-to-task for fast application speeds and improved run-time, with 0-38,250 BPM for fast drilling in masonry materials. Includes: DCD996 - 20V MAX* XR Lithium Ion Brushless Premium 3-Speed Hammer drill, Belt Hook, 360° side handle. This is a bare tool item - battery sold separately.

• High performance transmission for fast application speeds and improved run time
• High efficiency brushless motor delivers up to 57 percent more run time over brushed
• 0 38,250 BPM for fast drilling in masonry materials
• 3 Mode LED light with Spotlight mode
• Battery sold separately
• Battery & Charger Sold Separately
• Maximum initial battery voltage (measured without a workload) is 20 volts; Nominal voltage is 18

User questions & answers

Question:	Does this seller have a link for a single 5ah battery?, all I could find is 2pcs battery
Answer:	Battery model DCB205 is available for purchase as a single pack online or by calling 1-888-678-7278.
Question:	Will it do hammer only? Chipping
Answer:	I own this drill and it will drill and hammer drill only. When hammer drill setting is selected it rotates and hammers. Theres no way to have it hammer with out rotation. I mostly use this drill for large wood holes 3/4 -1in or with holes saws in wood. This drill has so much power that I use it almost only in 3rd high gear. It's fun watching the unsuspecting coworker put it in low and watch them go for a ride .lol
Question:	Does it have a 220 V charger? if not, can you provide with one 220v instead of 110v
Answer:	it comes with a 110v charger. I bought this: FLAGPOWER Li-Ion Battery Charger 12V MAX and 20V MAX for Dewalt DCB101, for $29 and it works great
Question:	Maybe a dumb question, but is there a different between a hammer drill and a drill with a hammer setting? Is this too powerful to use regularly
Answer:	There are no dumb questions except those not asked. If the word hammer is used in the description then you are dealing with a hammer drill. The hammer setting is designed for use with a masonry drill bit for use when drilling into concrete or bricks and is not beneficial when using a regular drill bit and drilling into regular surfaces. It is not a matter of being "too powerful" but a matter of being unnecessarily pounding on a surface where there is no need or benefit to pound. The hammer setting does not get used unless drilling with a masonry bit.

Product features

DCD996B BARE TOOL 20V MAX XR LITHIUM ION BRUSHLESS 3-SPEED HAMMER DRILL

At just 8.4 ins long and 4.7 lbs, DEWALT's Premium 3-Speed Hammer drill (DCD996) features up to 2.8x faster application speed at 0-38, 250 BPM and 2,250 RPM, is up to 82% more powerful, and provides up to 2.8X more run time.

Powerful

The 20V MAX XR Hammer drill(DCD996) features a powerful brushless motor that supplies 820 Units Watts Out (UWO) for a faster application speed.

Durable

Featuring durable nitro-carburized metal ratcheting chucks and comfortable handle grips, these tools are GUARANTEED TOUGH for durability on the jobsite and include coated and sealed switches that help to resist moisture and dust contamination

Product description

The dewalt® 60V max* mixer/drill with e-clutch® system has over 2x the power of our corded mixer allowing it to easily mix thinnest, tile mortar, and fiber reinforced concrete†. in addition to mixing, the powerful brushless motor allows the DCD130 to tackle demanding drilling applications. In order to improve control the mixer/drill has anti-rotation e-clutch® system, which offers technology capable of detecting the motion of the tool. This feature senses the motion of the tool and shuts it down If necessary. The red indicator LED  illuminates when the e-clutch® system is engaged.

• Mix up to 19 premixed drywall buckets (4.5 gal) on a single charge using DCB606 flexvolt battery (6Ah).**
• Mix up to 17 buckets of tile mortar (5 gal) on a single charge using DCB606 flexvolt battery (6Ah).**
• Mix up to 9 buckets of concrete (4.5 gal) on a single charge using DCB606 flexvolt battery (6Ah).**
• Integrated e-clutch® system helps to improve user control.
• 3-Position side handle allows for optimum position while mixing.

User questions & answers

Question:	Is there a hammer selection
Answer:	Annular Cutter capacity (diameter) 2 in (per Dewalt's website)
Question:	Does it come with a battery charger
Answer:	Annular Cutter capacity (diameter) 2 in (per Dewalt's website)
Question:	Este equipo mezclador drill, tiene reversa, velocidad variable y sirve como atornillador a pesar de su baja rpm
Answer:	drill does not reverse, has 2 forward speeds, can not drill with left hand drill or backout a tap
Question:	Comes with a DeWalt bag
Answer:	The drill is about as loud as any drill of this size. Best comparison I could think of is grandma's old school vacuum cleaner. Sorry I don't own a decibel meter. By no means is it Hollywood quite for any hypothetical safe cranking.

Product description

Delivers increased drilling performance and increased overload protection for added durability. 0-1250 RPM (revolutions per minute), variable speed reversing switch for increased versatility. 980 UWO (unit watts out). 1/2" Keyed chuck for greater bit retention. 360 deg (Degree) locking side handle for greater control and versatility. Anti-slip Soft grip handle and two-finger trigger for increased comfort. Metal gear housing for jobsite durability and increased reliability. 4.9 lb. (Pound). 3 year limited warranty. This product is manufactured in Mexico. This product meets customer requirement.

Versatile and easy to handle, the DEWALT DWD210G 1/2-Inch VSR Pistol-Grip Drill delivers the power you need for all your jobsite drilling and fastening needs. The DWD210G features variable-speed control, a convenient reversing switch, a comfortable pistol grip, and an auxiliary handle.

Patented DEWALT-Built Motor with Overload Protection

With its powerful 10 amp motor, the DEWALT 1/2-Inch VSR Pistol-Grip Drill is capable of delivering speeds of 0 to 1,200 rpm. This translates to quick, versatile drilling and driving.

At the heart of this drill's performance is a patented DEWALT-built motor that generates 50 percent more power than a standard motor of the same size. It also provides increased overload protection for extended tool life.

Designed for Versatility and Durability

As versatile as it is powerful, the DWD210G functions well for both steel and wood applications. When working with a spade or auger bit in wood, it offers a 1-1/2-inch capacity, and it can handle a capacity of 2-9/16 inches when used with a self-feed unit. The drill can also handle a 1/2-inch twist bit when working with steel. When used with a hole saw, the drill offers a 3-5/8-inch capacity in wood and a 2-inch capacity in steel.

Its keyed 1/2-inch chuck grips the bit securely to prevent slippage, and a metal gear housing provides added durability.

Built with Comfortable, Accurate Handling in Mind

Comfortable handling goes a long way toward ensuring accurate results. The DWD210G is built with an ergonomic grip, and its two-finger rubber trigger makes power control easy. A locking, 360-degree, soft-grip side handle gives you hand-position options for improved user comfort and better overall command of the drill. And it weighs an easy-to-manage 4.9 pounds, decreasing user fatigue after extended use.

The DWD210G 1/2-Inch VSR Pistol-Grip Drill comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DWD210G 1/2-Inch VSR Pistol Grip Drill, 360-degree locking side handle with soft grip, and chuck key with holder.

From the Manufacturer

Pistol grip 1/2-Inch variable speed with reverse drill 10.0-Amp motor delivers increased performance 0-1200 RPM, variable-speed reversing switch for versatility. Soft grip handle and two-finger trigger provides comfort. Metal gear housing for jobsite durability and reliability.360-Degree locking side handle. Generates more power with improved overload protection for added durability.

• Country of Origin:Mexico
• Package length:11.0"
• Package width:14.0"
• Package height:4.0"

User questions & answers

Question:	Will this drill be able to bore out 1 1/4" holes in 4x4 studs
Answer:	No. There is no trigger lock on this otherwise excellent drill.
Question:	Any masonary bit included
Answer:	Yes and very easy to switch between forward and reverse. We have really put this drill to work and are very happy with its performance.
Question:	Has anyone found a good case for this drill
Answer:	Most electric (mains powered/cord) drills make terrible screwguns and this drill is no exception. The issue is torque, which is not effected much by the speed of an electric motor. Electric motors deliver almost 100% of their available torque immediately upon being energized and will produce that same amount of torque throughout their speed range (that's why freight trains, in the US, are driven by electric motors. The engines you hear are diesel electric generators which power the electric traction motors that make the train go. Without that instantly available torque the train would never move). All electric motors deliver torque like this. It has nothing to do with a brand. That instantly available torque is also what makes mains powered drills tear up screw heads, break screws, shred driver bits and cam out of the screw head to put the distinctive track marks on walls and furniture. It's also what makes mains powered drills perfect for drilling holes, which is precisely what they're designed to do. Since you can't do anything practical to change the way electric motors work the solution is to design the screwgun around a motor with less torque and lower power requirements. It doesn't take much torque to drive a screw (next to none if properly sized pilot holes have been drilled) and useful levels of screwdriving torque can easily, and conveniently, be provided by 18v-24v which can be had in a small rechargeable battery. Unless you're doing a LOT of 1/4"+ diameter hole making buy an inexpensive mains powered drill and spend the extra money on a nice cordless driver/drill and batteries. You'll get a lot more mileage for your money that way.
Question:	Why is speed described as 0-1200 RPM and review says it starts at either 250 or 600 RPM? I need something with true variable speed
Answer:	Stability is better with the mid grip over the pistol grip in the sense that your hand is closer to the target rather than behind the whole drill. It has better control and is easier to keep on the head of a screw or what have you. :)

Product features

DWD210G

The DWD210G 1/2" (13mm) VSR Pistol Grip Drill has a powerful 10 Amp motor with overload protection to drill at 0-1250 rpm in forward or reverse. Constructed with soft grip handle for comfort and housed in metal gear for durability.

Special Features

As versatile as it is powerful, the DWD210G functions well for both steel and wood applications. When working with a spade or auger bit in wood, it offers a 1-1/2-inch capacity, and it can handle a capacity of 2-9/16 inches when used with a self-feed unit. The drill can also handle a 1/2-inch twist bit when working with steel. When used with a hole saw, the drill offers a 3-5/8-inch capacity in wood and a 2-inch capacity in steel.

Its keyed 1/2-inch chuck grips the bit securely to prevent slippage, and a metal gear housing provides added durability.

Product description

The DeWALT DWP849X 7-Inch/9-Inch Variable Speed Polisher has a powerful, 12.0-Amp, all ball-bearing construction motor for long life and durability. It has electronic control that maintains specified speed under load delivering the desired finish results. The conveniently located variable speed dial lets user set maximum speed from 0-600/3500 rpm for different materials and applications. It also has a variable speed trigger allows user to control speed from 0 to dialed maximum setting easily. It has heat-treated, precision-cut steel gears for smooth operation and external brush caps for easy servicing. The large spindle lock button allows for easy and quick backing plate changes. It also features a Wool Ingestion Shield that eliminates wool ingestion increasing tool life and reducing service costs and a non Mar Rubber Gear Case Cover that reduces surface imperfections and improves gripping surface. Includes Polisher, hook and loop backing pad bale and straight side handles.

• Powerful, 12.0 Amp, all ball bearing construction for long life and performance for the most demanding applications
• Electronic module maintains specified speed under load delivering better finish results
• Conveniently located variable speed dial lets user set maximum speed from zero to 600/3500 rpm for different materials and applications; Spindle Thread: 5/8 inches 11
• Wool Ingestion Shields eliminates wool ingestion increasing tool life and reducing service costs
• Non Mar Rubber Gear Case Cover reduces surface imperfections and improves gripping surface

User questions & answers

Question:	can you use a 10 pad
Answer:	Yes that’s basically what I use is 10” polishing pad for aluminum and stainless steel. I use a 6000 rpm for cutting then use this one for final stage of polishing since it’s a lower rpm at 3500. I like this one for final stage as I can turn it down to 2000 rpm for a final mirror finish.
Question:	will a 4 inch pad be compatible
Answer:	Can, I use a 5 inch. I usually buy DeWalt products but this one I don't really recommend. I would go for the Makita. This polishe has a problem with 800 then to 600. It's very troublesome with product flying.
Question:	Hi, what thread does this machine have
Answer:	5/8" - 11 spindle threadAdditional Information: SpecificationsAmps 12.0AmpsMax Watts Out 1250WNo Load Speed 0-600 / 0-3,500rpmSpindle Thread 5/8"-11Spindle Lock YesTool Length 18.5"Tool Weight 6.7lbs
Question:	I have this machine...what do i need to do to learn how to correct paint to a great finish
Answer:	Go to the junk yard and buy several panels. Use the machine for about 200 hours. (No, I'm not kidding). THEN, you can use it on an actual car. Not saying that you can't use it before then without screwing something up bad, but don't come near my car with it! Seriously, watching Youtube and all is great but do not use this without some practice on things that won't matter if you screw up. Also, learn the difference between things you do with this that you can fix (like with a random orbital) and things you do that you can't fix.

Product description

This 20V MAX* brushless cordless oscillating multi-tool includes a universal accessory adaptor and two wood cutting blades to help get your project started. The DCS354 cordless oscillating multi-tool has a powerful brushless motor providing up to 57% more run time over a similar brushed tool. The Quick-Change™ accessory system allows you to change blades quickly and easily, and with the universal accessory adaptor, it's compatible with most oscillating tool accessories. The DUAL-GRIP™ variable speed trigger provides ultimate speed and application control. The DEWALT oscillating tool guide system allows you to customize the depth or height for accurate repeatability, and the bright LED light illuminates dark work spaces. Battery and charger sold separately.

• Brushless motor delivers up to 57% more run time over brushed
• Dual-Grip™ variable speed trigger gives users ultimate speed and application control
• Universal accessory adapter for use with most oscillating tool accessory brands
• Quick-Change™ accessory system allows blades and attachments to be changed quickly without wrenches
• Bright LED Light illuminates dark work surfaces for accurate cutting

User questions & answers

Question:	Will the 12V battery work on this
Answer:	Mine was new
Question:	Will a 20 volt dewalt xr 5 ah battery work with this
Answer:	Yes
Question:	What is the Difference between 20v atomic model and the same model but not atomic
Answer:	Yes there is space, y have inside 3 x drills 7" long and a chisel of 10"
Question:	Made in usa
Answer:	We can't say for sure as we have not tested the Hammer drill for this application, but the DCH273P2 is a high-performance drill that is powered by a DEWALT brushless motor and a durable German engineered mechanism that delivers 2.1 joules of impact energy.