8 best tools supply nail guns

Product description

The Framing Nailer NV90AG(S) drives wire collated nails from 1-3/4" up to 3-1/2" in length and features Metabo HPT's next generation "industrial design. " The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7. 7 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. The convenient side-load, tilt bottom magazine allows for quick and easy fastener replenishment. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.

• FASTENERS: Accepts 16° +/- 1 wire coil nails from 1-3/4-in - 3-1/2-in
• AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine
• WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty
• DEPTH ADJUSTMENT: Tool-less depth of drive dial adjusts for flush fastening in varying materials
• TRIGGER: Selective actuation switch allows for either sequential or contact nailing with the simple flip of a switch
• DEPTH ADJUSTMENT: Tool-less depth of drive dial adjusts for flush fastening in varying materials
• LIGHTWEIGHT: At only 7.7 lbs, it is easy to use all day

User questions & answers

Question:	can you get a rubber tip for it
Answer:	The tool is 9.95 lbs. with out the battery and 11.37 lbs with the battery.
Question:	What are the minimum and maximum nail diameters for this gun
Answer:	The F-35XP would only be compatible with paper tape collected 30-34 degree nails.
Question:	No trabaja con compresor de aire? Dice electrico
Answer:	The F-35XP drives off-set full round head and clipped head paper tape collated 30 to 34 degree angle framing nails from 2" to 3-1/2" length range.
Question:	Why the name change? Did Hitachi develop a bad reputation or something
Answer:	It can take 30° - 34° paper tape clipped heads

Product description

Specification:

Condition:100% Brand New

Material: metal 

Cup Capacity: 7ml(cc)

Nozzle: 0.3mm

Feed Type: Gravity

Pressure: 15-60PSI

Type: Red,Gold(Opitonal)

Weight: Approx.93g/3.3oz



Package list: 

1 x Airbrush

1 x Dropper

1 x Nozzle Small Wrench

1 x Intake Connector



Note:

1. Please allow 0~1 inch error due to manual measurement. Thanks for your understanding.

2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

• ❤【Airbrush Kit】- Gravity airbrush is made of brand new and high quality, durable to use
• ❤【Airbrush Compressor】- Dual-action gravity feed airbrush for fine art, nail art, temporary tattoo, cake decorating, hobbies, etc
• ❤【Airbrush Gun】- Watercolor pigments, inks and dyes, acrylic, automotive urethanes, lacquers, enamels (Not Included)
• ❤【Air Brush Painting Kits】- 0.3mmneedle nozzle, broad spray, double action trigger for easy and accurate spray
• ❤【Airbrush Makeup Kit】- Easy fluid refills and easy cleaning

User questions & answers

Question:	When I turn compressor on I have air coming out nozzle all time is this normal without touching the lever
Answer:	yes

• [High-quality Framing Nailer] Ideal v-nailer for art & picture frames and door assembly
• [Safety Trigger] With a safety trigger design to keep you safe and for professional use
• [High-efficient] Maximum capacity of 200 pcs of v-nails for one time
• [Ergonomic Design] Well balanced and low maintenance, its comfortable rubber grip can reduce operator's fatigue.
• [Compatible Fasteners] meite V-Nails of 7mm (9/32”),10mm (3/8”), 12mm (1/2”), 15mm (19/32”) at a diameter of 10.3mm. V nails will not come with the tool, but they can purchase from us.

User questions & answers

Question:	How do I know which size v nail to purchase
Answer:	Dear customer, this is normal. Since this is a single-action spray gun, the air will come out nozzle when the compressor is turned on. Press the lever and the paint will come out.
Question:	Just “how thick” are the V nailers
Answer:	Yes- I am 66 and my feet tend to swell, they are also flat and are wider because of that too.
Question:	How do you get fasteners for this tool. the picture states that logan v nails won't fit, but amazon only lists logan v-nails for sale
Answer:	They have normal shoe laces.
Question:	how the crap do you load this gun. Your instructions sucked. on verge of returning it
Answer:	I wouldn't machine wash them as they are part leather. Also it's a heavier hiking shoe, not a canvas sneaker. You could definitely clean them with the right product(s).

Product features

Specification

• Weight: 1.49 kg/3.28 lbs
• Height: 208 mm/8.18"
• Length: 270 mm/10.62"
• Width: 65 mm/2.55"

Specification

• Capacity: 200 pcs
• Operating Pressure: 60-100 psi
• Air Inlet: 1/4" NPT
• Color: Grey

Fastener

• Type: V nails
• Length: 7-15 mm (9/32"-19/32")
• Thickness: 0.3 mm (.012")
• Height: 4.0-4.1 mm (.157"-.161")
• Width: 10.3 mm (.405")

Fastener

• Drives v nails of 7mm (9/32”),10mm (3/8”), 12mm (1/2”), 15mm (19/32”) at a diameter of 10.3mm

Exhaust Cover Design

Fine workmanship, four screws firm and durable

Nail Outlet

Made of high-strength tungsten steel, the surface has been treated with high polishing for many times.

Positioning Bracket

Convenient to operate

Rubber Comfort Grip

The handle can be used for a long time.

Product description

Function

These nozzle needles are ideal for clearing away the blockages with dried paint, it can restore your nozzle back to perfect condition with carefully use.

Application

A necessary accessories kit for airbrush. Tiny brushes for cleaning teensy tiny tubes, airbrushes, spray guns, tattoo equipment, nozzles, etc.

5 Different Brushes

The 5 brush diameters vary from about 2, 2.5, 3.2, 4, 5 mm, the different brushes will ensure that you can thoroughly clean the inside of your equipment.

Premium Quality

This spray gun clean brush set is made of high quality metal material, durable and wear resistant. Screw off dried paint / debris, all-metal construction with easy-grip handle.

Compact and Portable

These brushes are compact size and portable, lightweight and easy to carry, you can take them wherever you go.



Color Media: Watercolor Pigments, Inks and Dyes, Acrylic, Automotive Urethanes, Lacquers, Enamels (not Included).





Specifications:

Name: Spray Pump Pen

Material: aluminum alloy

Color: gold

Item size: 150 * 70 * 25mm / 5.91 * 2.76 * 0.98in

Item weight: 54g / 1.90oz

Package size: 175 * 95 * 30mm / 6.89 * 3.74 * 1.18in

Package weight: 90g / 3.26oz



Package list:

1 * Spray Pump Pen

1 x Golden Color Needle

5 x Stainless Steel Needle

5 x Brush

• Fine quality nozzle, broad spray, action trigger for easy and accurate spray.Airbrush for model making,makeup, cake decorations, draw the outline of camouflage,tattoos nail art, etc.
• Made of fine quality material, convenient to use.Easy fluid refills and easy cleaning.
• Professional action gravity feed airbrush kit for hobby paint craft.
• Saving much more time than handmade drawing and excellent for your spray painting business.Action trigger design saves raw materials and practical.Widely used by the general model enthusiasts.
• There are two kinds of connect ways, suitable for many kinds of compressor and spray machine, equipped with one small wrench, one paint cup, one straw, and one air inlet interface, the straw can inhale paint or other liquids.

User questions & answers

Question:	Is there anything else needed to airbrush with this ? Or is it all here to pick up and start working
Answer:	It's just the pen part; you'll still need the compressor.
Question:	What kind of compressor can I use
Answer:	Any that can be regulated down to 20 psi.
Question:	Can you use this for body painting
Answer:	As long as the paint is airbrush friendly you should be fine. keep in mind that the paint container is small.
Question:	Does the trigger control spray on and off also
Answer:	Yes, it's a dual action airbrush so the trigger can control the paint flow and the airflow separately. Push down=air on & pull back = paint flow on

Product description

The Makita 18V LXT Lithium-Ion cordless pin nailer, 23 GA. (Model XTP02Z, Tool only), is a hose-free solution for installing casings, decorative trim, molding and baseboards. The XTP02Z is compact and powerful, and drives six different pin Nail lengths (5/8”, 11/16", ¾”, 1", 1-3/16", 1-3/8") with a magazine capacity of up to 120 pins. Using the 18V LXT 5.0Ah battery, The XTP02Z will drive up to 5, 300 pins on a single charge. It's part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star protection Computer controls. Star protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and compact Lithium-Ion batteries with the Star symbol on the battery indicating Star protection inside.

• Refined firing mechanism reduces recoil; reduces force required on the work surface when driving pin nails
• Drives 6 different lengths, 5/8", 11/16", 3/4", 1", 1-3/16" And 1-3/8", of 23 gauge pin nails (tool does not work with 1-1/4" Pin nails)
• Magazine capacity up to 120 pin nails
• Anti-dry Fire mechanism engineered to prevent driving blanks and damage to work surface
• "Tool-less" Depth adjustment for precise flush and Countersink finish
• Cordless for increased convenience; eliminates the need for a compressor and air hose

User questions & answers

Question:	What size battery do you buy in thextpo2z pin nailer cordless tool
Answer:	I guess it would depend on the job size you are using it for. I only use it for small jobs, so I only use a two hour amp battery. I guess if you had a larger job you would use an accordingly larger battery. As long as is the 18 V Makita battery.
Question:	will this gun shoot a slightly headed 23ga nail
Answer:	Probably not ...gun is very temperamental emend with typical headless pins
Question:	does it take a special charger for new 6.0 batterys
Answer:	Not sure but wouldn’t think so...more a battery question than pin nailer related
Question:	Anybody that have trouble with this gun have issues taking back within 3 year warranty? Thanks for any help
Answer:	Yes, i had issues with it jamming consistently so i returned it. A new one was sent and same exact issue. These guns have multiple design flaws and operational issues. No you are not losing your mind. Unfortunately this is not a good product from makita

Product features

Makita XTP02Z 18V LXT Lithium-Ion Cordless 1-3/8" Pin Nailer, 23 Ga., Tool Only

The Makita 18V LXT Lithium-Ion Cordless Pin Nailer, 23 Ga. (model XTP02Z, tool only), is a hose-free solution for installing casings, decorative trim, molding and baseboards. The XTP02Z is compact and powerful, and drives six different pin nail lengths (5/8”, 11/16", ¾”, 1", 1-3/16", 1-3/8") with a magazine capacity of up to 120 pins. Using the 18V LXT 5.0Ah battery, the XTP02Z will drive up to 5,300 pins on a single charge.

XTP02Z Nail Loading

Drives 6 Different Lengths of 23 Gauge Pin Nails

• 5/8"
• 11/16"
• 3/4"
• 1"
• 1-3/16"
• 1-3/8"

Does Not Work With 1-1/4" Pin Nails

Product description

The NR83AA5 Paper Collated Framing Nailer is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and mobile home and modular home construction. The NR83AA5 is like the original NR83A that you have come to trust, but now with an improved trigger design and sharing all the same internal parts as the original NR83A. The NR83AA5 relies on the same cylinder valve drive system as the NR83A, which offers both rapid response and great driving power.

• AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine
• FASTENERS: Accepts both 30 degree paper strip collated clipped head nails and 30 degree paper strip collated offset round head nails from 2" - 3-1/4" in length and .113-.131 in nail diameter for ultimate convenience
• TRIGGER: Selectable trigger mode; choose contact or single sequential actuation mode via switch in the trigger
• RAFTER HOOK: Can be positioned on left or right side depending on user preference
• EASY LOAD: Rear loading magazine for quick replenishment
• MAGAZINE: 2-Piece magazine for durability and replacement ease
• LIGHTWEIGHT: 9 lbs and well balanced for easy maneuverability

User questions & answers

Question:	Que mdida de clavos usa
Answer:	Hello M. Conrad, thanks for your question! You can purchase the V-nails on Amazon by searching the keyword "meite Hard wood type 10.3mm Dia. V Nails 10mm 4 strips 6000pcs FOR PICTURE FRAME JOINER V-NAILER JOINING GUN""
Question:	Where is this nail gun made
Answer:	Dear buyer: The following are the steps to load the V-Nails. 1. Push the fastener then the nail Propellant is opened.2. Put a whole row of V-nails into the nail propellant.3. Push the magazine and it will be locked and closed.Also we have sent you an email, please go and check it.If you still get confused, please feel free to call us on 479-438 2417. Thank you and best regards!

Product description

The NV65AH2 Coil Siding Nailer brings power, precision and convenience to the jobsite. Capable of driving nails as large as 2-1/2" x .099" at a rate of 3 per second, the NV65AH2 is both powerful and efficient. With added features like a selective actuation switch, side-load tilt bottom magazine and repositioned depth of drive adjustment dial, this professional siding nailer gets even better. Additional features such as the adjustable air deflector, no-mar nose cap and plastic shield add convenience, and the ability to use both wire or plastic sheet nails creates flexibility.

• SIDING NAILER: Accepts 16º wire collated coil siding nails from 1-1/2" - 2-1/2". Also accepts 15º plastic collated coil siding nails from 1-1/2" - 2-1/4"
• SELECTIVE ACTUATION: Switch between sequential or contact nailing with the simple flip of a switch
• EASY LOAD: Side load, tilt bottom magazine for fast and easy reloads
• FASTENERS: Drives wire and plastic sheet collated siding nails for added flexibility
• NO MAR NOSE CAP: Protects material from accidental marks
• DEPTH ADJUSTMENT: Tool-less depth of drive adjustment for optimal depth in a variety of applications
• AIR DEFLECTOR: Adjustable air deflector directs the air exhaust in any direction

Product features

No mar nose cap attachment

Protects material from accidental marks.

Tool-less depth of drive adjustment

For optimal depth in a variety of applications.

Selective actuation switch

Allows for either sequential or contact nailing with the simple flip of a switch.

Plastic shield

Deflects wire collation for added safety.

Product description

The MAX CN445R3 SuperRoofer is a professional grade pneumatic roofing nailer. The applications for the CN445R3 include fastening asphalt and fiberglass shingles, fastening lath wire to plywood, the installation of siding, and wooden box assembly. The CN445R3 is equipped with a swivel plug to alleviate the tangling of the air hose and also features a trigger lock to prevent accidental firing of the tool.

• Tar resistant nose- designed to resist tar 4x longer than conventional tools.
• Full round head driver blade for better holding power.
• Magnet holds the last nail in place to prevent the tool from jamming.
• MAX patented maintenance free end cap filter prevents foreign substances from entering the tool helping internal parts last longer, requiring less maintenance on the tool.
• Dial adjustable depth control allows depth adjustment with no special tool.

User questions & answers

Question:	Does this come with a carrying case
Answer:	No, sorry.
Question:	What is the recommended coiled nail brand to use for no jam-ups
Answer:	Though it’s true, not all coil nails are created the same, as long as they keep there form (don’t get crushed in you pouch or stuff thrown on top of the coil nail box in your truck) you should be more or less fine. The gun you use also makes a difference. I’ve had good success with Max, also bostich. They seem to jam far less and are somewhat easier to unjam than other brands I’ve used, like my dads ridged and porter cable. But remember no gun and no nail brand, even if both Top tier, will be completely jam free.
Question:	What is the difference between this model and the CN445R model
Answer:	MAX SuperRoofer is in its third generation - the latest tool is the MAX CN445R3. The CN445R and CN445R2 are older tools. dh
Question:	Does it work for siding
Answer:	Most siding guns accommodate a 2 1/4” nail. This gun will hold 3/4”-1 3/4” inch nail. Most hardie type siding requires 1 1/2” in stud so it would work for that type of siding. As far as vinyl it will nail flush and not leave the expansion gap required