12 best paslode roofing nailers

Product description

NEW Paslode Coil Roofing Nailer 3175-RCU O ring + Cylinder Seal 402725 Repair Kit

Product description

Cordless Roofing Nailer provides cordless convenience and mobility for a one-man roofing job. Ideal for roof repair, flashing installation, vent installation and punch list repairs. Includes: Tool, 1 rechargeable battery and charger, safety glasses and back pack carrying case.

From the Manufacturer

Paslode Cordless Roofing Nailer is more than just a roofing nailer. You can depend on it to help reduce downtime and increase profits. This unique nailers is faster than hammering, requires no hoses or compressors and is all you need for one man roof repair. Work smarter. Go cordless.

• Eliminate compressor set-up and tear-down
• Aleviate workplace clutter
• The first fuel powered cordless roofing tool
• Drives 2 nails per second
• Better alternative to hand nailing

User questions & answers

Question:	Can you use this gun all day on a daily basis
Answer:	Yes. I use them all the time with this sander. It should come with a hook and loop pad, but if not, they can be purchased separately for around $20.
Question:	Does this take the same batteries and fuel cells as the framing nailer
Answer:	IF YOU HAD A SOFT FLEXIBLE ENOUGH PAD TO GO INTO THE RECESSES IT WOULD
Question:	Does this nailer work in sub-freezing temperatures
Answer:	No, dry sanding only.
Question:	Does this nailer use standard collated roofing nails or do you have to use Paslode nails only
Answer:	No

• Drives 3/4-Inch to 1-3/4-Inch full head coil roofing nails;
• Adjustable shingle guide for quick shingle spacing;
• Integrated side skid pads prevent the tool from sliding off roof when placed on its side;
• High-capacity magazine holds up to 120 coil nails at a time; Tool free adjustable depth of drive for consistent and controllable nail fit; 360° tool-free air exhaust.
• Interchangeable trigger for single shot or bumper fire function.

User questions & answers

Question:	Does this work with hitachi hot dipped galvanized 16 degree nail coils
Answer:	We used the hitachi nails with ours.
Question:	how big of a compressor do you need
Answer:	A small pancake compressor will work you only need 90 psi
Question:	What comes with the gun
Answer:	safety glasses, hex wrenches, oil bottle, manual
Question:	can you rapid fire with it
Answer:	Idk if u could mess with it to make it rapid shoot, but as It comes u have to hit the trigger everytime u shoot the gun

Product features

Product description

The cordless XP framing nailer system is designed to deliver 15% more power to increase productivity. Less standing nails and better drive performance into harder woods means you can put your hammer away and let this cordless nailer do it all. Plus, the new Paslode framing fuel with all season formula lets you keep working in temperatures down to 14⁰F when compressor hoses are freezing. The lightweight Paslode cordless XP framing system offers the nailer, nails, and fuel so you enjoy the power to drive non-stop nailing all day, every day.

• Increased Productivity - Drives nails flush in LVL and other hardwoods that remodelers encounter.
• All Season Formula - Works in temperatures down to 14°F.
• Lightweight - 7.2lbs. for better comfort and control while working overhead or in tight spaces.
• Guaranteed Durability 50% Longer Run-time with 7V Li-ion Battery for up to 9,000 nails per charge.
• Compact Design: Fits between 16" o.c. studs, joists and roof trusses.

User questions & answers

Question:	Dumb question: is the charger included (no mention specifically of same
Answer:	This framing nail does not work with plastic collated nails. This model requires clip head or offset round paper collated nails. If you need the one that uses round head plastic collated nails, you will need model NR1890DR or NR1890DRS.
Question:	What gas cart is used
Answer:	This tool is not made in the USA.
Question:	is the nails for this gas nails the same as the air nailer? i will be using both together
Answer:	First, a reminder that this version of the nailer is only made to shoot papertape nails, 30-34 degree. If the nails you have are trul plastic collated them they are 21 degree and will cause damage. After making sure you have put in the correct nails, there are two buttons right by the bottom of your hand when holding the tool. One is on/off, and the other changes from sequential mode to bump mode. Press and hold the on button till a green light comes on, then operate.
Question:	What is the largest length nail that can be used with this gun? I'll be doing some floor plates in a remote location, so probably need at least
Answer:	In most cases you shouldn't have any problems with this.

Product description

The NV45AB2 1-3/4-Inch Roofing Nailer is used for various construction work such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine. When only the best will do for roofing applications, choose the roofing nailer that has been sought after by professionals for decades.

• APPLICATIONS: Ideal for installation of asphalt roofing shingles and insulation boards
• EASY FASTENER INSTALLATION: Side loading magazine, convenient and easy for quick replenishment
• LIGHTWEIGHT: At only 5.5 Lb., the NV45AB2 is lightweight and well balanced for easy maneuverability
• SPEED: Quick driving system, for maximum efficiency
• DEPTH ADJUSTMENT: Tool-less depth of drive adjustment, for precision nailing/flush driving
• RUBBER PADS: Help keep nailer from sliding off roof when not in use
• CARBIDE TIPPED PUSH LEVER: Reduces wear
• DURABLE: Pneumatic power feed and return, allows tool to operate in the harshest conditions

User questions & answers

Question:	Recommended air pressure
Answer:	Hello, Thank you for your interest in the Metabo HPT Roofing Nailer. The recommended air pressure is between 70 and 120 PSI. Thank you again and have a great day!
Question:	Can I used .092” nails or do I have to use .12” nails
Answer:	Hi there! This tool only accepts nails that are .120" in diameter. Hope this helps!
Question:	Does it come with the carrying case
Answer:	No it does not
Question:	Diámetro medida de la manguera
Answer:	Muy bueno la pistola gracias

Product features

Side Loading Magazine

Convenient and easy for quick replenishment

Long-lasting Rubber Grip

For added comfort

Carbide Tipped Push Lever

Reduces wear

5.5 lbs, Lightweight and Well Balanced

For easy maneuverability

Product description

Replacement 3175-RCU O-ring Kits For Paslode Coil Roofing Nailer

• 3175-RCU O-ring Kits For Paslode Coil Roofing Nailer
• High Performance Seal Replacements for the O-Ring
• Note: No Pater Gasket or Seal for Cap/Frame

Product description

The Makita 1-3/4" Roofing Coil nailer (model AN454) combines rugged construction and robust performance with less weight (only 5.2 lbs.). The AN454 accepts standard .120 shank diameter Coil roofing nails from 3/4” to 1-3/4” nails in length. The AN454 is engineered for longer tool life with durable and lightweight aluminum housing and an easy-loading adjustable canister. Ease-of-use features include a "tool-less" Depth adjustment engineered for more precise control and flush nailing. Additional features include large carbide inserts on the nosepiece for long lasting performance. Oversized steel wear plates are engineered to reduce abrasion on the tool.

• Faster nail driving speed for maximum performance
• Aluminum housing for longer tool life
• Lightweight design at only 5.2 lbs.
• Easy, one-step open, Adjustable canister system for faster, more precise nail loading
• “Tool-less” depth adjustment dial for more precise control in flush nailing shingles

User questions & answers

Question:	Could this be used to nail up fence boards
Answer:	no, You would be better off with a siding nailer the nails are longer and they are ringshank so they hold a lot better.
Question:	The Product Information says that this is corded electric for the power source. Isn’t it pneumatic
Answer:	YES ITS PNEUMATIC. RUNSON. APPROX. 110 PDS.

Product features

Makita AN454 1-3/4" Coil Roofing Nailer

The Makita 1-3/4" Roofing Coil Nailer (model AN454) combines rugged construction and robust performance with less weight (only 5.2 lbs.). The AN454 accepts standard .120 shank diameter coil roofing nails from 3/4” to 1-3/4” nails in length. The AN454 is engineered for longer tool life with durable and lightweight aluminum housing and an easy-loading adjustable canister. Ease-of-use features include a 'tool-less' depth adjustment engineered for more precise control and flush nailing. Additional features include large carbide inserts on the nosepiece for long lasting performance. Oversized steel wear plates are engineered to reduce abrasion on the tool.

Product description

High speed valve technology drives over 10 nails per second. High lifetime engine seals and feed system for durability and long life. Depth adjust wheel with numbered detents helps drive nails to the proper depth into a variety of materials. Ergonomic design is lighter (4.5 lbs.) than leading competitive Coil roofing mailers. Steel skid plates with rubber inserts protect the tool and help to stop it from sliding. Operating pressure: 70-120 PSI. Over mold grip. Fixed exhaust.

• High speed valve technology drives over 10 nails per second
• High lifetime engine seals and feed system for durability and long life
• Easy to use

User questions & answers

Question:	Does this nail gun come with a plastic carrying/ storage case
Answer:	Tool only no case
Question:	Is this a new nail gun
Answer:	LOL
Question:	Cual es el mínimo y el maximo de las puntillas que lleva
Answer:	Solo lleva un rollo de clavos para madera por lo regular son de un solo tamaño en rollo...Pero en lo grande entra la medida hasta 1 pulgada 3\4 para esa clavadora y mas chicos
Question:	Can u use this nailer to install a fence
Answer:	No!This gun is recommended for roofing installation. You should try a siding/fencing gun like the Hutachi nv65ah2 or something similar. I actually purchased the freeman version for around $160 and it works pretty good.

Product description

1.5" Paslode Positive Placement Metal Connector Nailer

• Durable and powerful for tough jobsite conditions
• Lightweight, compact design fits in tight spaces
• 2-strip magazine- high capacity, less reloading
• Non-slip cushioned grip provides comfort and control
• Probing tip locates nail hole quickly- work faster

User questions & answers

Question:	Do this take 2.5 nails or only
Answer:	My Kit will fix Your tool.
Question:	dies this have the belt clip
Answer:	No

Product description

The BOSTITCH BRN175A bulldog 15 degree Coil roofing nailer combines performance and adjustability to handle roofing applications. This light weight 4.8Lb roofing nailer drives 3/4" to 1-3/4" Coil roofing nails. It has two firing modes, single sequential and contact mode, which can be selected using the dial above the trigger. There is a wheel to adjust the drive depth so that nails can be properly installed into a variety of materials. The exhaust cap can swivel so that the exhaust is always pointing away from the user, and the shingle guide under the magazine can be adjusted for proper shingle spacing.

• Upgraded engine and feed system improves drive quality, overall performance, and durability
• Dual door MAGAZINE can be closed multiple ways
• Oversized tool free depth adjustment for proper nail setting
• Carbide nose inserts help to protect the nose from wear
• Redesigned grip handle for better feel

User questions & answers

Question:	Does this nailer require a compressor
Answer:	Yes, this is pneumatic powered.
Question:	Where is made
Answer:	The country of origin of the BRN175A is Taiwan.
Question:	Does this also shoot siding coil nails
Answer:	It absolutely will NOT. I thought maybe it would from reading other reviews. It will just jam up every time

Product description

Type of nailer: -Framing nailers. 21degree round nails. Plastic Collated. Type of fastener: -Framing nails. Color: silver. Dimensions: -22.8" L *16.2" W*5.3"H Weight: -8.73lbs. 9021NS framing nailer shoots 21 degree nails from 2” up to 3-1/2” long. Its heat treated special alloy iron drive pin, wear-resisting bumper and O-rings allow continuous heavy duty work. With aluminum magazine, it only weighs 7.93lb. It is widely applied in floor and wall framing, truss /window build-up, subflooring and roof-decking, wall-sheathing, mobile home and modular housing construction. 1 year Limited Warranty

• Widely Used：For 21 Degree 2" to 3-1/4"(50-83mm) Plastic Collated Framing Nails. Tool-less depth of drive adjustment for improved control and flexibility when fastening into various types of wood. It's perfect for framing, wall sheathing, siding installation, pallet building, wood products assembly, and fencing ect
• High Quantity: A lightweight and durable magnesium body, ergonomic secure handle, and interchangeable trigger for quick fire or single shot function. With the most durable materials under strict quality control guidelines, our framing nailer can be used for a long time.
• Humanized Design: Tool-less depth of drive adjustment for improved control and flexibility when fastening into various types of wood. Open nose design for easy extraction of a jammed nail. Perfect for professional contractors or home DIY projects. Lightweight and well balanced for easy maneuverability
• Special Improvement: Ergonomic non-slip rubber grip on handle helps maintain a secure hold and comfort during use. -Hardened claw tip resists wear on the nose and minimizes slippage when driving at an angle or "toe-nailing".
• Safety Guarantee:Safety designs to require that the nail gun can work only when the safety switch is pressed in order to avoid damage caused by misoperation.

User questions & answers

Question:	who makes this nailer.? it is not bostitch, its not a well known brand, but seems it is a good framing nailer by thr rating
Answer:	This listing is for a Hitachi. You should receive a Hitachi gun. I can't speak for what other sellers do, but this supposed to be original Hitachi. There is a separate listing for the Metabo branded guns. They don't belong here.
Question:	Will hitachi nr83 parts work with this gun? seems like a clone
Answer:	Yes It does! Had problems with the gun not feeding or driving nails all the way, this kit has my nail gun working like a champ.
Question:	Where do I get the nails
Answer:	Yes it should
Question:	Do you have to pull the trigger every time to shot a nail or can you hold the trigger and bump the nose to repeatedly shoot nails for like nailing ply
Answer:	We just watched you tube to get the guns rebuilt. And was successful.....

Product features

Safety Instruction:

1.Keep children away.

2.Use safety glass and ear protection.

3.Never use oxygen,combustible or any other bottle gas.

4.Do not connect tool to compressed air which pressure exceeds 120 psi.

Show Detail:

Its heat treated special alloy iron drive pin, wear-resisting bumper and O-rings allow continuous heavy duty work. Extra bumper packed individually as a gift.

Two Actuation Modes

Selective actuation on trigger allows for either sequential or contact nailing.

Good Service

Any quality or use problem , feel free to ask us. We are always here for you.

Product Features And Advantages:

1.360° adjustable exhaust.

2.Tool-less depth of drive adjustment.

3.Ergonomically designed comfort grip.

4.Extra bumper packed individually as a gift.

5.Heat treated special alloy iron drive pin, wear-resisting bumper and O-rings allow continuous heavy duty work.

6.With aluminum magazine, it only weighs 7.93lb.

About BHTOP

BHTOP provides top-quality, innovative fastening tools for industrial, construction, and home-improvement applications. Products include pneumatic nailers,impact wrench; cordless angle grinder, cordless nailer, and cordless circular saw etc.

Product description

The HBT HBCN45P is designed for use with 15 degree, 7/8'' To 1-3/4'' Wire Collated roofing nails, it is an ideal tool for roofing, siding installation and wooden box assembly. This air nailer can drive roofing nails fast and hard while its lightweight design prevents user fatigue. The nail gun features an adjustable shingle guide for accurate shingle spacing and steel contact safety with dual carbide inserts for less wear. The selectable trigger makes for easy change between sequential and contact mode. It also features a tool-less adjustable depth control and 360 degree exhaust. This professional-grade tool is perfect for construction workers, roofers and anyone looking for long-lasting performance. Operation pressure: 70-120PSI, magazine capacity: 120pcs.

• Drives 11 gauge full head coil roofing nails ranging from 7/8'' To 1-3/4''
• Selective actuation switch allows for either sequential or contact mode
• Tool-free adjustable depth control helps set nails properly; adjustable shingle guide allows for quick and consistent shingle spacing
• Durable and lightweight magnesium housing helps reduce user fatigue
• Skid-resistant pads/wear guards for safety and tool protection; contact safety With Carbide inserts for less wear and tear

User questions & answers

Question:	Could anyone tell me the specific brand of 1 inch nail that would be compatible
Answer:	The tool was returned because we couldn't find any nail size or brand that would work consistently.
Question:	Does it bump nail/rapid fire
Answer:	It absolutely bump fires/ rapid fire
Question:	Is the npt 1/4 inch and does it shoot wire coulated 1 3)4 roof nails off home Depot shelf
Answer:	Yes it is 1/4" npt. It should shoot any of the 1 3/4 coil roofing nails. I have always used the fast grip brand and have never had an issue.
Question:	Can I use a Bostitch nails it should have quarter 15 degree smooth shank
Answer:	No, that will cause nail gut to jam