9 best hitachi coil nailers

Product description

The Hitachi NV65AH2 2-1/2" coil siding nailer brings power, precision and convenience to the jobsite and weighs only 4. 8 lbs. Capable of driving nails as large as 2-1/2" x . 099" at a rate of 3 per second, the NV65AH2 is both powerful and efficient. With newly added features like a selective actuation switch, side load, tilt bottom magazine and repositioned depth of drive adjustment dial, the professional preferred siding nailer gets even better. Additional features such as the adjustable air deflector, no mar nose cap and plastic shield add convenience and the ability to use both wire or plastic sheet nails creates flexibility. Standard accessories include Safety Glasses (875769), Hex Bar Wrench 3mm (943277), Hex Bar Wrench 4mm (944458), and Hex Bar Wrench 5mm (944459). Collation - Wire/Plastic, Nail Length 1-1/2" - 2-1/2", Nail Diameter . 090 - . 099, Nail Capacity 200 - 300, Nail Loading - Side, Operating Pressure PSI 70 - 120.

• Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name.
• Selective actuation switch allows for either sequential or contact nailing with the simple flip of a switch
• Side load, tilt bottom magazine for fast and easy reloads; Capable of driving nails as large as 2 1/2 x .099 inches at a rate of 3 per second
• 4.8 pounds, lightweight and compact for easy maneuverability
• Tool less depth of drive adjustment for optimal depth in a variety of applications
• Drives wire and plastic sheet collated nails for added flexibility
• Adjustable air deflector, directs the air exhaust in any direction

User questions & answers

Question:	Does this nailer come with a belt hook
Answer:	Hi there! For most polishing on the GET75-6N Sander, the RSM6044 extra soft backing pad will give the best results. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Is Hitachi warranty good if purchased from this seller
Answer:	Like most products there are likely components manufactured from around the world. Are you asking where it was assembled?
Question:	Can this nailer be used installing sofit and facia 1/4" 4d headed nails
Answer:	The sanding paper/pad you use would determine what material you can sand - so yes
Question:	Will I receive a Hitachi or Matibo gun
Answer:	The bottom of this has a lot of holes to fit various pads, one of the BEST qualities about it, it gives you lots of options for sanding disc types. Even though a 5-hole may not line up perfectly, you would still get dust collection out of it because most of the holes will be functional. It comes with a special bosch pad that has a hole pattern designed specifically for this sander. ANY regular 8 hole, 5inch sanding disc will fit this and give you the dust collection functionality perfectly. The same would hold true for the 6inch model - an 8 hole disc as well. You can probably use Festool discs and those "Net" or "Mesh" discs that are there (which, by the way, work really well on this sander because it has a whole bunch of smaller holes too)

Product features

Side-load, Tilt-bottom Magazine

For fast and easy reloads.

Selective Actuation Switch

Allows for either sequential or contact nailing with the simple flip of a switch.

Plastic Shield

Deflects wire collation for added safety.

Tool-less Depth of Drive Adjustment

For optimal depth in a variety of applications.

Product description

The NV83A5 Round Head Coil Framing Nailer is used for construction work such as wall sheathing, roof decking, subflooring, mobile and modular home construction, making of wooden boxes, pallets and drums, packing operations in manufacturing plants, and for other types of general packing and crating work. The NV83A5 is like the original NV83A that you have come to trust, but now with an improved trigger design and sharing all the same internal parts as the original NV83A. The NV83A5 relies on the same cylinder valve drive system as the NV83A, which offers both rapid response and great driving power.

• LIGHTWEIGHT: Only 8.8 lbs (or 9.1 lbs if the rafter hook is installed) lightweight and well balanced for easy maneuverability
• POWER AND SPEED: Cylinder valve drive mechanism provides quick response and rapid, powerful driving
• AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine
• APPLICATIONS: For wall sheathing, roof decking, subflooring, packing and crating work, and more
• SELECTIVE ACTUATION: Selectable trigger mode; choose contact or single sequential actuation mode via switch in the trigger
• FASTENERS: Accepts 16° wire coil nails from 2-IN - 3-1/4-IN
• HARDENED CLAW TIP: Resists wear on the nose and minimizes slippage when driving at an angle or toe-nailing

User questions & answers

Question:	Where is this made (country
Answer:	My local Home Depot did not carry Paslode roofing nails. I had read previous reviews stating you could use other brands of roofing nails. My nailer performed flawlessly. The coils were wound too tight to go straight into the gun, so I loosened the coil and inserted them.
Question:	Does this come with a “no mar” tip, if not can I buy one
Answer:	Where do I get the belt hook. And how in the hell can Hitachi consider themselves a premium brand and sell a ladder access tool without one? I'm livid.
Question:	can i shoot nails on concrete or cement blocks ? for furring strips
Answer:	Good morning, We offer a 60 day warranty. After your first 60 days you have a one year from date of purchase directly with Hitachi. Have a great day.
Question:	How long is the warranty
Answer:	I use it for siding facia and soffit. The nails have to be compatable with the gun. Don't have to be Hitachi brand. lots of generic brands out there

Product description

The NV45AB2 1-3/4-Inch Roofing Nailer is used for various construction work such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine. When only the best will do for roofing applications, choose the roofing nailer that has been sought after by professionals for decades.

• APPLICATIONS: Ideal for installation of asphalt roofing shingles and insulation boards
• EASY FASTENER INSTALLATION: Side loading magazine, convenient and easy for quick replenishment
• LIGHTWEIGHT: At only 5.5 Lb., the NV45AB2 is lightweight and well balanced for easy maneuverability
• SPEED: Quick driving system, for maximum efficiency
• DEPTH ADJUSTMENT: Tool-less depth of drive adjustment, for precision nailing/flush driving
• RUBBER PADS: Help keep nailer from sliding off roof when not in use
• CARBIDE TIPPED PUSH LEVER: Reduces wear
• DURABLE: Pneumatic power feed and return, allows tool to operate in the harshest conditions

User questions & answers

Question:	Recommended air pressure
Answer:	Hello, Thank you for your interest in the Metabo HPT Roofing Nailer. The recommended air pressure is between 70 and 120 PSI. Thank you again and have a great day!
Question:	Can I used .092” nails or do I have to use .12” nails
Answer:	Hi there! This tool only accepts nails that are .120" in diameter. Hope this helps!
Question:	Does it come with the carrying case
Answer:	No it does not
Question:	Diámetro medida de la manguera
Answer:	Muy bueno la pistola gracias

Product features

Side Loading Magazine

Convenient and easy for quick replenishment

Long-lasting Rubber Grip

For added comfort

Carbide Tipped Push Lever

Reduces wear

5.5 lbs, Lightweight and Well Balanced

For easy maneuverability

Product description

How do you make the best even better? Simple, you listen to what your customers want and you make it happen. Easier to maintain…Done! Interchangeable parts with the original tool…Done! Less parts in the trigger…Done! No composite parts in the trigger…Done! Add a rafter hook…Done! The NV83A5 is not only a tool for the pro it’s also the tool that provides an answer to the pros needs. Relying on the same cylinder valve drive system as the original NV83A, the NV83A5 offers both a rapid response and some serious driving power. The side load pop-out magazine only adds convenience to an already awesome tool.

• Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name.
• Tool-less depth or drive adjustment for flush fastening in varying materials
• Selective actuation on trigger allows for either sequential or contact nailing
• Cylinder valve drive system for Rapid response and increased durability
• Side load pop-out MAGAZINE for fast and easy reloads. Piston Reciprocating Action Driving System
• Hardened claw tip resists wear & grips more for driving nails at different angles

User questions & answers

Question:	Does it shoot 2 3/8 in X.113 nails
Answer:	It depends on which plan you want to make. Go to their website and look under "Jig and Fixture Components - Build-It-System" and find the one you want. I built a Bridged Crosscut Box, that required some additional parts from INCRA and some wood and screws for the fence and bridge. This needed the starter kit plus 36" T-Track Plus, a 36" and 18" board for the fence and bridge, an additional Large Build-it Panel and another Miter Slider.
Question:	Why is this 2lbs less than the Metabo
Answer:	I don't own a bench dog but I can tell you that the throw length (the push into the cutter) varies depending on the miter slot distance from the cutter. I had to make some modifications to the Kreg devise to make it work on my machine. This is a well thought out system in regards to cutting mitered frames but has very little tolerance or range in respect to all of the router table systems on the market. I needed to make at least 6 adjustments to the devise for it to work on my router table, which would probably void any warranties. I have 7 router tables, dedicated one for this devise and haven't used it in over a year. I found that coping or hand mitering the trim was faster. If I was to give this a 1 to 10 rating it would be a 3.
Question:	works to nail plywood on concrete
Answer:	The fence on the Kreg Beaded Face-Frame System is 28" long.
Question:	This nail gun will work with 15°nail gun
Answer:	If it has the same track or screw to fit your table then yes I would think so. I fitted mine to a Jessem router table
Question:	When you guys gonna have better hooks for the nail gun
Answer:	Melissa,You will need a router with a 1/2" collet. A router greater than 3hp or better is best.
Question:	What size hose does this take
Answer:	I am not sure of how your Delta saw is configured. I can't imagine a Delta saw not being in the front of the line with regard to saws that Vega would want to accommadate. I ordered the Vega system for my early 70's Craftsman 10 inch saw and ,"Yes" I was nervous since I did not take the price of the system lightly. I ordered the unit and when it arrived I was intimidated for a very brief period. Once I started the install, I became very confident that the unit would work with my saw. The Vega system is so universal that it would be difficult to not be able to install it on almost any saw. The most that may be needed on most saws may be to drill a hole or two in the saw base (table) . Once installed on my saw, I calibrated the fence and when that was done, I could use the calibrations on the Vega Fenceto make very accurate cuts. The Vega system has been one of my better investments in woodworking. Not sure I have answered your particular question but I believe in theVega system after having used it.
Question:	What all comes with it
Answer:	I don't know. The mounting hardware is very versatile so if you're willing possibly do some drilling, you can probably make it fit. I think that you must have good access under the table to get the holes drilled and bolts in. On a separate note, I'd not recommend the 50" fence because it's unnecessarily large. If I were doing it again I'd get the 42". It's amazing how much floor space the extra 8" gobbles up. It is a great fence. Sorry I couldn't be more helpful.
Question:	Hi I was wondering when you will have the ones with the adjuster
Answer:	I just bought and installed this fence on an old Craftsman table saw model 113.298030 and I had to drill 1 hole for the back rail. The 3 other bolts, 1 more on the back and 2 for the front tube fit perfectly. Overall, very easy to install. Only complaint is the need to de-burr everything before installing. Not too big of a deal though. I would recommend this fence to my friends.

Product description

The Framing Nailer NV90AG(S) drives wire collated nails from 1-3/4" up to 3-1/2" in length and features Metabo HPT's next generation "industrial design. " The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7. 7 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. The convenient side-load, tilt bottom magazine allows for quick and easy fastener replenishment. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.

• FASTENERS: Accepts 16° +/- 1 wire coil nails from 1-3/4-in - 3-1/2-in
• AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine
• WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty
• DEPTH ADJUSTMENT: Tool-less depth of drive dial adjusts for flush fastening in varying materials
• TRIGGER: Selective actuation switch allows for either sequential or contact nailing with the simple flip of a switch
• DEPTH ADJUSTMENT: Tool-less depth of drive dial adjusts for flush fastening in varying materials
• LIGHTWEIGHT: At only 7.7 lbs, it is easy to use all day

User questions & answers

Question:	can you get a rubber tip for it
Answer:	The tool is 9.95 lbs. with out the battery and 11.37 lbs with the battery.
Question:	What are the minimum and maximum nail diameters for this gun
Answer:	The F-35XP would only be compatible with paper tape collected 30-34 degree nails.
Question:	No trabaja con compresor de aire? Dice electrico
Answer:	The F-35XP drives off-set full round head and clipped head paper tape collated 30 to 34 degree angle framing nails from 2" to 3-1/2" length range.
Question:	Why the name change? Did Hitachi develop a bad reputation or something
Answer:	It can take 30° - 34° paper tape clipped heads

Product description

The NV65AH2 Coil Siding Nailer brings power, precision and convenience to the jobsite. Capable of driving nails as large as 2-1/2" x .099" at a rate of 3 per second, the NV65AH2 is both powerful and efficient. With added features like a selective actuation switch, side-load tilt bottom magazine and repositioned depth of drive adjustment dial, this professional siding nailer gets even better. Additional features such as the adjustable air deflector, no-mar nose cap and plastic shield add convenience, and the ability to use both wire or plastic sheet nails creates flexibility.

• SIDING NAILER: Accepts 16º wire collated coil siding nails from 1-1/2" - 2-1/2". Also accepts 15º plastic collated coil siding nails from 1-1/2" - 2-1/4"
• SELECTIVE ACTUATION: Switch between sequential or contact nailing with the simple flip of a switch
• EASY LOAD: Side load, tilt bottom magazine for fast and easy reloads
• FASTENERS: Drives wire and plastic sheet collated siding nails for added flexibility
• NO MAR NOSE CAP: Protects material from accidental marks
• DEPTH ADJUSTMENT: Tool-less depth of drive adjustment for optimal depth in a variety of applications
• AIR DEFLECTOR: Adjustable air deflector directs the air exhaust in any direction

Product features

No mar nose cap attachment

Protects material from accidental marks.

Tool-less depth of drive adjustment

For optimal depth in a variety of applications.

Selective actuation switch

Allows for either sequential or contact nailing with the simple flip of a switch.

Plastic shield

Deflects wire collation for added safety.

Product description

Metabo HPT (formerly known as Hitachi power tools) offers an extensive line of professional grade power tools and accessories for woodworking, metalworking, drilling and fastening, concrete drilling and cutting, outdoor power equipment products as well as a complete line of pneumatic nailers, staplers, compressors and collated fasteners.

• Same fasteners. New name. Hitachi power tools has renamed to Metabo HPT
• Durable wire coil roofing nails
• Electro galvanized finish
• Smooth shank
• 7, 200 Count

Product description

NV45AB Coil Roofing Nailer Gasket, Seal & O`Ring Repair Kit will make it shoot like new!

• All of the O`Rings in the Tool
• Gasket Part#876-417, Gasket #877-754, Gasket #877-131, Gasket #877-767, Gasket #876-713
• Exhaust Valve Part#878-417 Clyinder check seal #876-167
• Feeder Spring Part#877-761 Bumper sheet #877-993
• Trigger Packing #878-734 & Trigger Ball #875645

User questions & answers

Question:	I have one of this roofing guns that is miss fireing anyone know why
Answer:	I think someone has miss spelled this. I think it is orbital pattern. I can say as a body shop owner for 30 years this is a good sander.
Question:	Will this entire kit rebuild my metabo nv45ab2? i nelive they are exactly the same but im no expert
Answer:	It works just like an auto body sander
Question:	I had order somthing on saturday whas my order finished
Answer:	Thank you for your inquiry. Our sanders will not overheat due to dust because of AirVantage's patented cooling design. The motor is sealed inside the housing. In addition, the control board has a sensor that would slow down the sander, when detecting a motor overloading, thus prevent it from overheating. HOWEVER, the sander can still overheat when using improperly, such as press hard down onto the tool during sanding (the sanding performance is not based on how hard one press down onto the tool, but the grit of the paper). On the other hand, please note that the tool comes with a 1 Year-Warranty, just send AlphegaZ a message, and we will be more than happy to assist in resolving your issue. Hope that answers your question, thanks!

Product description

The NV45AB2's "magazine, depth of drive, and bullet proof design are excellent; you could probably drive an 18 wheeler over this tool and it would still work," Tools of the Trade Magazine, July/August 2005. The 1 3/4" Roofing Nailer is used for various construction works such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine.

Lightweight and durable, the Hitachi NV45AB2 1-3/4-Inch Coil Roofing Nailer stands up to the elements and provides consistently accurate results over the life of the tool. An ideal tool for a variety of construction projects, including installation of asphalt roofing shingles and insulation boards, the NV45AB2 features a high-capacity side-load magazine, depth of drive, durable construction, and more.

All-Weather Nailer You Can Count On

The NV45AB2 has been rigorously tested in the most extreme roofing environments, so you can count on it--no matter what the forecast is. Thanks to a pneumatic-powered nail-feed mechanism that removes dirt and moisture from the nailer, you can be sure this tool will work in any weather.

High-Capacity Magazine and Quick-Driving Capabilities for Efficiency

The NV45AB2 features a side-loading magazine that accepts 120 7/8-inch to 1-3/4-inch-long coiled wire collation nails with 0.120-inch diameters. The air inlet is 3/8 inch, and the ideal operating air pressure is 70-120 psi.

The NV45AB2 has a quick-driving feature that provides maximum efficiency when nailing large areas by allowing the nailer to shoot each time the nose touches the work surface. The large carbide inserts on the nose provide durability and performance during operation.

Designed for Maneuverability

The Hitachi NV45AB2 1-3/4-Inch Coil Roofing Nailer is lightweight at just 5.5 pounds, so it's easy to maneuver while working on a rooftop. Its well-balanced design ensures easy one-handed operation, and the long-lasting non-slip rubber-grip keeps you comfortable and in control. Rubber on the nailer's side allows you to place the tool on a roof without worrying about it sliding off.

The Hitachi NV45AB2 Roofing Nailer measures 9-27/32 x 4-5/8 x 10-3/8 inches (LxWxH). It is backed by Hitachi's five-year limited warranty.

About Hitachi: A Tradition of Innovation

Hitachi Power Tools (Hitachi Koki USA, Ltd.) provides professional-grade power tools for a variety of applications, including woodwork, metalwork, concrete, drilling, cutting, and fastening. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.

What's in the Box

NV45AB2 1-3/4-Inch Coil Roofing Nailer, safety glasses, and shingle guide assembly.

From the Manufacturer

The Hitachi NV45AB2 1-3/4-Inch Coil Roofing Nailer is the epitome of power and durability. Hitachi's pneumatic feed and return ensures consistent feeding even in the harshest conditions. The carbide tipped push lever prevents wear while the rubber pads (on the body of the tool) prevent it from slipping. With a rubber grip for comfort and tool-less depth of drive, the NV45AB2 is the whole package. The Hitachi NV45AB2 1-3/4-Inch Coil Roofing Nailer comes with a 5-year limited warranty. Hitachi Power Tools provides professional-grade power tools for a variety of applications, including woodwork, metalwork, concrete, drilling, cutting and fastening. Since its inception, Hitachi has pioneered innovative technologies that have improved the quality of craftsmanship worldwide. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.

• Hitachi Power Tools has renamed to Metabo HPT; Same great tools, with only a new name

User questions & answers

Question:	how does this gun do for shooting 1 3/4" nails reroofing over shingles
Answer:	Very well. I was impressed with its performance for 1 1/4" as well as 1 3/4"! Don't forget to oil!
Question:	Made in
Answer:	the one's that I got was made in Taiwan. if you can find one's made in Japan, that will be great. but again. it may be just the luck of the draw.
Question:	Will this nailer do Hardie Siding
Answer:	Yes it will work well for that. Hardie siding can be installed with this as manufacturers installation only requires 1" penetration into the stud. If nailing into sheathing then longer nails won't matter. This nails up to 1 3/4".Please refer to pages 11 and 12 of their best practice guide where this model is specifically mentioned as recommended for Hardieplank. See the link below, page 11 and 12.http://www.jameshardie.com/pdf/best-practices/hz/hz5-best-practice-guide-us-intro-tools.pdfThanks,ADP
Question:	I just bought one of these and it will leak if the trigger is held down halfway. If you depress it all the way it stops. Is this normal
Answer:	has to be normal, i bought one of there AV50AP2 and it did it from when new, thought there was a problem but been like that for years, my NV45AB2 does it too.