12 best dewalt cordless nail gun
DeWalt offers a range of cordless nail guns, often referred to as cordless nailers, that are designed for various construction and woodworking applications. These cordless nail guns provide the convenience of portability without the need for cords or hoses. Here's some information about DeWalt cordless nail guns:
Types of Nailers: DeWalt manufactures a variety of cordless nail guns for different tasks. This includes framing nailers, finish nailers, brad nailers, and roofing nailers, each tailored for specific types of fastening applications.
Cordless Technology: DeWalt's cordless nailers are powered by rechargeable lithium-ion batteries. These batteries provide sufficient power to drive nails into various materials without the constraints of cords or hoses, offering greater mobility and flexibility on job sites.
Depth Adjustment: Many DeWalt cordless nail guns feature depth adjustment settings, allowing users to control the depth to which nails are driven. This feature is essential for achieving the desired level of penetration and preventing over-driving or under-driving nails.
Sequential and Bump Firing Modes: DeWalt nailers typically offer both sequential and bump firing modes. Sequential mode requires the user to depress the trigger for each nail, providing precise control. Bump firing mode allows for faster nailing by simply bumping the nose of the nailer against the work surface while holding down the trigger.
Jam Clearing: DeWalt cordless nail guns often include mechanisms for quick and easy jam clearing. This helps maintain productivity and reduces downtime caused by nail jams.
Magazine Capacity: The magazine capacity varies depending on the type and model of the cordless nailer. It's important to choose a nail gun with a magazine size that suits your specific project requirements.
Compatibility: DeWalt cordless nailers are typically compatible with DeWalt's 20V Max or 18V XR lithium-ion battery systems, which are commonly used across their cordless power tool lineup. This compatibility allows users to interchange batteries between different DeWalt tools.
Durability: DeWalt is known for producing robust and durable tools, and their cordless nail guns are designed to withstand the rigors of construction and woodworking applications.
Safety Features: These nailers often come equipped with safety features, such as trigger locks and no-mar tips, to prevent accidental firing and protect the work surface from damage.
DeWalt cordless nail guns are suitable for both professional contractors and DIY enthusiasts. They offer the convenience of cordless operation while maintaining the power and performance needed for various nailing tasks. When using a DeWalt cordless nailer, it's essential to follow safety guidelines, wear appropriate protective gear, and choose the right nail size and type for your project.
Below you can find our editor's choice of the best dewalt cordless nail gun on the market
DEWALT 20V MAX Cordless Brad Nailer Kit, 18GA (DCN680D1)
DEWALT
Product description
The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8" to 2-1/8" which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Compatible with all DEWALT 20V MAX* batteries
- Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
- Tool-free selectable trigger for sequential or contact actuation modes
- Low nail lockout prevents dry firing and unwanted marks on the work material
User questions & answers
| Question: | Is this a straight brad nailer for 5/8"-2" brads or an angled finish nailer 1-1/4 thru 2-1/2 finish nails |
| Answer: | THIS IS A STRAIGHT BRAD NAILER. 5/8" - 2". |
| Question: | Is this the same battery of 20v max drill |
| Answer: | Yes. To my knowledge all "20V Max" tools from DeWALT use the same battery. I have several tools and all the batteries work with all the tools. |
| Question: | Please confirm this kit includes the charging unit, battery and bag |
| Answer: | Mine came w/ those items since it is a kit & not tool only. |
| Question: | Can i nail 2x4 with this im building a garage |
| Answer: | Are you being serious? I really hope not! If you are, do not build anything! This gun is designed to fasten trim to walls like baseboard, casing etc. A "framing gun" is designed for "framing"... Dewalt has battery framing guns, they're about $100 more. But don't buy one. Call a pro, have them build your garage. |
DEWALT 20V MAX Framing Nailer Kit, 21-Degree, Plastic Collated (DCN21PLM1)
Product description
The 20V MAX* 21 Plastic Collated Cordless Framing Nailer delivers the performance demanded by pro's to get the job done. The DCN21PL can drive a range of plastic collated fasteners up to 3-1/4" and 0.148" in diameter into a wide range of materials. Its compact shape, well-balanced design, and easy-to-operate features make it a highly productive tool capable of getting the job done quickly and efficiently. 100% battery power means you can show up and start working without wasting time setting up a compressor or spending money on costly fuel cell replacements.
- Dual-speed motor optimized to drive a wide range of fasteners for versatility
- Tool-free selector switch for sequential or bump-fire modes
- Tool-free depth adjustment for precise nail placement
- High-strength aluminum magazine with easy-to-operate pusher latch
- Stall release lever to reset driver blade in the event of a jam
User questions & answers
| Question: | Does this come nailer come withe batteries and charger |
| Answer: | Hi hope this answer your question(s) lol ... Tool kit includes: XP Cordless Framing Nailer, rechargeable lithium-ion battery, lithium-ion battery charger, rugged carrying case, owner's manual, safety glasses, and 5/32 in. hex wrench |
| Question: | What nails can i put in this .. thank you |
| Answer: | Orange Fuel Cell. I purchased the fuel with the nail pack for the CF325 Model. Fuel and nail packs are matched, and would be ordered by Nail Size (Gauge and Length, and Angle/degree). Example: This worked for my nailer ( https://www.amazon.com/dp/B002NU6HBQ/ref=cm_sw_r_em_apa_LsKHxb16PDPP4 ) |
| Question: | can you use the 20/60 volts-9ahdwalt battery or which is the best batery for this nailer |
| Answer: | I do not know. I purchase the nails and gas cylinder as a kit. |
| Question: | Que medidas de clavos usa y cual tipo debo usar |
| Answer: | http://www.paslode.com/product/cordless-xp-framing-nailer/ Go to the above web-site and look at the Spec's. I'm building a new home and purchased this gun. I have had other Battery powered nail guns, and returned them because they were not reliable. Nails (30 degree) are expensive, but you get what you pay for. If your going to be in a remote location I suggest you buy extra gas cylinders and paslode oil. I also have the Paslode Finish Nailer as well. Both products are very reliable and well worth the investment. I give it 5 Stars..... Good luck with your project |
DEWALT DCN650D1 20V MAX XR 15 GA Cordless Angled Finish Nailer Kit
DEWALT
Product description
The DEWALT DCN650 15 Gauge Angled Finish Nailer drives 15 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, baseboards, and hardwood floor installation. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN650 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
- Diagnostics with LED indicator Communicates battery charge status: charged
- Charges all DEWALT 12V - 20V max li-ion batteries from a vehicle's power outlet enabling batteries to be charged while driving to work or on a jobsite
- Automatic shut-off protects excessive discharge of vehicle's battery
- *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
User questions & answers
| Question: | Can I use this for trim |
| Answer: | I plan to use mine for trim shortly (shorter nail). Used longer nail for 3/4" pine tongue and groove wall. Love the product. |
| Question: | How many finish nails does one battery fire? I know the battery size will influence the number significantly but is it closer to 150 or |
| Answer: | I use mine all day and on a fresh battery it will go the distance. I have never felt like the batteries were an issue vs amount of nails shoot |
| Question: | Will this gun shoot staples also |
| Answer: | no 1 1/4'' to 2 1/2 15ga finish nails only. |
| Question: | Does this include the battery, charger and bag |
| Answer: | Yes, It includes both |
DEWALT 20V MAX Framing Nailer Kit, 30-Degree, Paper Collated (DCN692M1)
DEWALT
Product description
*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
- Dual-speed motor optimized to drive a wide range of fasteners for a variety of applications
- Tool-free selector switch for sequential or bump Fire modes
- Tool-free depth adjustment for precise nail placement
- Stall release lever to reset driver blade in the event of a jam
- Adjustable rafter hook
User questions & answers
| Question: | is it possible to use this nailer on dry wall |
| Answer: | Yes you can. Just use a smaller nail and adjust the depth. |
| Question: | Biene con cargador |
| Answer: | Si pero esta herramienta es muy mala mo la recomiendo |
| Question: | Do I need the two speed? Those who have the two speed, do you use the second one that is not on the 690? Thanks |
| Answer: | Yes. The 2 speed is worth the extra money |
| Question: | will this do framing, finishing and brad nails |
| Answer: | Only framing nails |
DEWALT 20V MAX Finish Nailer, Angled, 16GA, Tool Only (DCN660B)
DEWALT
Product description
This product features a 20-Degree finish nailer, bump operating mode, and integrated LED lights as well. It is convenient and works effectively. It is definitely a great quality product.
- Integrated LED lights
- Bump operating mode
- 20-degree finish nailer
- *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
User questions & answers
| Question: | Is it brushless |
| Answer: | I believe that it is brushless. I have 2 of the nail guns and they are great. Works fast and sets the nails ever time. Battery lasts a long time as well. |
| Question: | Just got the nail gun. somehow it jammed as soon as placed brads in it. it seems to flip the brad. how is that possible? not happy i'm wasting brads |
| Answer: | Ummm, yes, this is a finish nailer, big difference from a brad nailer. Make sure you are using 16 gauge 20 degree nails, not 15 gauge, and definitely not 18 gauge brads. This is a great nailer, but I'm not tossing out my Bostitch air nailers to replace it! This is a great supplement to the air nailers for small jobs that only last a day or so. |
| Question: | Have they sorted out the Low nail depth issue yet? After some use my contractors say it wont Drive 2-1/2 nails |
| Answer: | This is my second Dewalt finish nailer and I have never had any issues with it not driving 2 1/2" nails. That being said, if you are driving several 2 1/2 nails then you need to make sure you are working with a fully charged battery. I have noticed that if the battery gets to a 1/3 charge it will not drive 2 1/2" nails as deep. It also depends on the type of wood (hard or soft). |
| Question: | Can this be used for blind nailing tounge and groove paneling |
| Answer: | Yes but don't waste your money if you plan on using this gun a lot. I've had mine in the shop 3 times in the year I've owned it. Buy the 18 volt version is more powerful and breaks way less. I've used mine for the last 6 years at least. This new gun will not even drive 2 1/2" nails consistently through soft wood let alone any hard wood. |
DEWALT 20V MAX Finish Nailer, Angled, 15GA (DCN650B)
DEWALT
Product description
The DEWALT DCN650 15 Gauge Angled Finish Nailer drives 15 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, baseboards, and hardwood floor installation. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN650 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC628)
- Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
- Compatible with all DEWALT 20V MAX* batteries
- Tool-free selectable trigger for sequential or contact actuation modes
User questions & answers
| Question: | Can you use this nail finisher for outside fencing? Or is it just for crown molding and trim |
| Answer: | 6' Cedar privacy fence...no. But picket, or redwood (3.5" or 5.5" boards) where you want a clean finish...absolutely! Note, a 15-gauge is as small as you'd want to go where finish-nailers are concerned. To add strength to your nailed boards, shoot the nails in at slight, opposing angles--not straight in. This will provide a substantially stronger hold. Also, to maximize hold, adjust the nail depth so that the nail head sits flush with the board. Counter-sinking the nail too much will weaken the hold strength. |
| Question: | Tweeters and integrated subwoofer??? Might want to double check the description |
| Answer: | Yes, it does chirp nicely as you hammer away, but I don’t think it’s from tweeters. |
| Question: | how powerful are the subwolfers |
| Answer: | The wolves are super strong! |
| Question: | Will someone alert the seller to update their description? I seriously doubt this nailer has an integrated subwoofer |
| Answer: | Hahaha, integrated Bluetooth speakers in your finish nailer ... 🤔 |
DEWALT 20V MAX Cordless Brad Nailer, 18GA, Precision Point (DWFP12233)
Product description
Precision point technology: precise nail placement as a result of a smaller nose compared to current DeWalt nailers and No need to compress the contact trip to actuate the tool. Kit includes: nailer, 1/4" swivel fitting, sample brad nails, carrying case and extra no-mar tips.
- Tool-free depth-of-drive adjustment for proper setting of nail heads
- Rear exhaust to keep contaminates away from work
- Drives 18 GA Brad nails from 5/8" to 2-1/8" length
- Tool-free jam release mechanism for easy nail removal
- Selectable trigger: sequential or contact actuation
User questions & answers
| Question: | How much pressure required to trugger |
| Answer: | I don’t know about minimum but it works fine at 90-100. |
| Question: | Is this Oil-free |
| Answer: | Yes oil free... the piston ring and cylinder are both made of Teflon... oil will destroy the gun. |
| Question: | This Nailer is sold with a case |
| Answer: | Affirmative a nice hard case |
| Question: | Does it come with a case |
| Answer: | Yes holds instruction book and gun very little room for nails |
DEWALT 20V MAX XR Finish Nailer, Angled, 16GA (DCN660D1)
DEWALT
Product description
The DEWALT DCN660 16 Gauge Angled Finish Nailer drives 16 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, and baseboards. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN660 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
- Tool-free selectable trigger for sequential or contact actuation modes
- Tool-free jam release to quickly and easily clear nail jams
- Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall
- Ideal for fastening crown molding, door & window casings, and baseboards
- Use 16 Gauge angled finish nails from 1-1/4″ to 2-1/2″ for maximum performance on the unit
User questions & answers
| Question: | Can it set nails in hardwood |
| Answer: | About 8ft long. |
| Question: | Do nails go in straight, or do they penetrate at an angle? Hence, the name angled finished nailer |
| Answer: | Yes it will! Cheers, Beverage Factory Customer Support |
| Question: | Have anyone use 16ga. paslode nail to this dewalt? it's 20 degrees angle,i wonder if it fits before i buy it, gun down lot of nails leftover |
| Answer: | Hello, The top opens and if your arms are the right size and length you can reach all of the interior, something like a carboy brush is needed if you have large diameter or short arms. I recommend pressurizing and pushing both cleaning and sanitizing solution through the output to make sure your dip tube is clean. Anthony The Beverage Factory |
| Question: | baretool only? or comes with battery and charger |
| Answer: | Hello, Thank you for your question. The dip tube will already be inside the tank. Best wishes, Kaylyn Beverage Factory 800.710.9939 |
DeWALT DCN45RND1 20V 15 Degrees Lithium-Ion Cordless Coil Roofing Nailer Kit
Product description
DeWALT DCN45RND1 20V 15 Degrees Lithium-Ion Cordless Coil Roofing Nailer Kit
- Includes full manufacturer warranty
User questions & answers
| Question: | Can I but the tool only |
| Answer: | All I know is that they work like a charm on new fiber cement. My guess is they will work fine. |
| Question: | Can i use a flexvolt in this |
| Answer: | We use this model on a regular drill and the smaller model on an impact. |
| Question: | Will this Gun shoot any cool nail |
| Answer: | Hello, thank you for your question regarding the Malco C5A Power Assisted Crimper. This item is meant to be used with a minimum 14.4 Volt cordless or maximum 7 Amp A/C drill. Please let us know if you have any additional questions. Have a Great Day! |
| Question: | Which nails should be used |
| Answer: | I run my compressor around 100 psi and all work fine. |
DeWalt DWFP72155 15 Gauge Precision Point "DA" Style Angle Finish Nailer
DEWALT
Product description
The DEWALT DWFP72155 15 GA PrecisionPoint™ "DA" Style Angle Finish Nailer drives 15 Gauge DA style nails from 1-1/4 in. to 2-1/2 in. making it ideal for interior trim, baseboards, crown molding and more. With its 16 in. On-center gauge to measure exactly 16 in. from end to nose, and PrecisionPoint™ technology for precise nail placement, this tool is ready to work.
- Precision Point™ Technology: Precise nail placement due to a smaller nose, compared to current DEWALT nailers, and no need to compress the contact trip to actuate the tool
- Long-life, maintenance-free motor helps to keep from staining the work surface
- Tool-free jam release mechanism for easy nail removal
- Tool-free depth-of-drive adjustment for proper setting of nail heads
- Selectable trigger: sequential or contact actuation
User questions & answers
| Question: | Is the nail recommended for this tool easy to find, is there troble in finding nails for this tool |
| Answer: | "DA" angled finish nails are 35 degrees. |
| Question: | Is it a pneumatic tool |
| Answer: | Yes, because these nails are DA-style (34° angle), just like the Bostitch btfp72155. |
| Question: | Is the dewalt dwfp72155 15 gauge a 34 degree nailer |
| Answer: | Traditional Bostitch's FN style (25 degrees) is unique to its brand. However, the newer Bostitch DA style (34 degrees) of finish nailer will work with the corresponding angled finish nails. |
| Question: | What about recoil |
| Answer: | I would call a local tool repair shop. Unless you acsess the parts detailed list online at Hitachi website. |
Ryobi 18V One+ Airstrike 16-Gauge 3/4"-2-1/2" Cordless Finish Nailer P325 - Battery & Charger Included
Product description
This item is removed from retail packaging for shipping purposes (Bulk Packaged, No Retail Packaging) and will arrive in a generic shipping box
- AirStrike Technology provides cordless convenience, eliminating the need for a compressor and bulky air hose
- Toolless depth-of-drive adjustment helps protect work surface and allows proper setting of finish nails
- Dual chemistry charger charges 18V ONE+ batteries in as little as 1 hour
- Indicator lights show status as batteries are charged and maintained
- This item is removed from retail packaging for shipping purposes (Bulk Packaged, No Retail Packaging) and will arrive in a generic shipping box
User questions & answers
| Question: | Will my 16-guage finish nailer shoot 18-guage brads |
| Answer: | No, just a fully charged battery and lots of 16-gauge finish nails. |
| Question: | will this shoot staples |
| Answer: | There are a few numbers on it. Most likely the part# is P102. But there’s also a 130429135 that could help. |
| Question: | Does this product require any other items to make it work -- i.e. cartridges of any kind |
| Answer: | Yes on the amperage but I have no idea about the warranty. |
DEWALT DW45RN Pneumatic Coil Roofing Nailer
DEWALT
Product description
High speed valve technology drives over 10 nails per second. High lifetime engine seals and feed system for durability and long life. Depth adjust wheel with numbered detents helps drive nails to the proper depth into a variety of materials. Ergonomic design is lighter (4.5 lbs.) than leading competitive Coil roofing mailers. Steel skid plates with rubber inserts protect the tool and help to stop it from sliding. Operating pressure: 70-120 PSI. Over mold grip. Fixed exhaust.
- High speed valve technology drives over 10 nails per second
- High lifetime engine seals and feed system for durability and long life
- Easy to use
User questions & answers
| Question: | Does this nail gun come with a plastic carrying/ storage case |
| Answer: | Tool only no case |
| Question: | Is this a new nail gun |
| Answer: | LOL |
| Question: | Cual es el mínimo y el maximo de las puntillas que lleva |
| Answer: | Solo lleva un rollo de clavos para madera por lo regular son de un solo tamaño en rollo...Pero en lo grande entra la medida hasta 1 pulgada 3\4 para esa clavadora y mas chicos |
| Question: | Can u use this nailer to install a fence |
| Answer: | No!This gun is recommended for roofing installation. You should try a siding/fencing gun like the Hutachi nv65ah2 or something similar. I actually purchased the freeman version for around $160 and it works pretty good. |
Latest Reviews
View all
Oem Car Power Inverters
- Updated: 26.06.2023
- Read reviews
Fantasy Books
- Updated: 16.05.2023
- Read reviews
Expensive Hard Hats
- Updated: 06.07.2023
- Read reviews
Dart For Adults
- Updated: 12.07.2023
- Read reviews
Football Mouthpiece For Braces
- Updated: 16.05.2023
- Read reviews