13 best max framing nailers
Max framing nailers are powerful and essential tools in the construction and carpentry industry. These tools are used for quickly and securely fastening large framing and structural elements, such as wooden studs, beams, and joists. Here's some information about Max framing nailers:
Framing Nailers Overview: Max framing nailers are pneumatic nail guns designed specifically for framing and sheathing applications. They use compressed air to drive large nails (typically 2 to 3.5 inches in length) into wooden or engineered lumber quickly and efficiently.
Types of Max Framing Nailers:
Round-Head Framing Nailers: These nailers use full-round head nails and are commonly used in areas with building code requirements for full-head nails.
Clipped-Head Framing Nailers: Clipped-head framing nailers use nails with a clipped head design, which allows for greater nail capacity in the magazine. They are typically lighter and more compact than round-head nailers.
Features and Capabilities:
Depth Adjustment: Max framing nailers often come with depth adjustment settings, allowing users to control how deep the nails are driven into the wood. This feature helps prevent over-driving or under-driving of nails.
Sequential and Bump Firing Modes: Most Max framing nailers offer both sequential and bump firing modes. Sequential firing requires the user to depress the nose of the nailer against the workpiece before each nail is fired, ensuring precise placement. Bump firing allows for faster nailing by simply bumping the nose against the workpiece to fire nails in rapid succession.
Anti-Dry Fire Mechanism: Many Max nailers are equipped with anti-dry fire mechanisms that prevent the tool from firing when there are only a few nails left in the magazine. This helps prevent damage to the nailer and ensures consistent nailing.
Easy Loading: These nailers typically have a quick and easy nail loading system, which simplifies the process of loading nails into the magazine.
Applications: Max framing nailers are commonly used in various construction tasks, including framing houses, building decks, constructing fences, and installing sheathing.They are indispensable for creating secure and stable structures.
Safety Considerations: Using any framing nailer requires proper safety precautions. Users should wear appropriate safety gear, including safety glasses and hearing protection, and follow the manufacturer's instructions and safety guidelines to avoid accidents.
Maintenance: Regular maintenance, such as cleaning and lubricating the nailer, is essential to ensure its longevity and reliable performance.
Max framing nailers are known for their durability, speed, and efficiency, making them a valuable tool for professionals in the construction and woodworking industries. When choosing a framing nailer, it's important to consider factors such as the type of nails it accepts, its firing modes, and its suitability for the specific framing tasks you need to accomplish.
Below you can find our editor's choice of the best max framing nailers on the marketProduct description
The Max USA Corp CN890F2 Super framer Coil framing nailer is a lightweight powerhouse. At only 7.7lbs, with a driving power of 1, 060 inch lbs it can stand up to any job. The short height design allows for easy access in tight spaces. The CN890F2 has a maintenance free end cap filter that keeps the internals of the tool clean, An easy load magazine, dial adjustable depth control, an aggressive nose for toe nailing, and a comfortable rubber grip. The CN890F2 also comes with a rafter hook, and a swivel Plug.
- Anti-double Fire mechanism
- Ultra light weight only 7.7 lbs
- Dial adjustable depth control
- Tangle free swivel plug
- Easy coil load MAGAZINE
- No-mar contact tip
- Aggressive nose for toe nailing
User questions & answers
Question: | Could this be used for siding work |
Answer: | It’s a DDR4 Motherboard |
Question: | Is a carrying case available for this nailer? What nails does it accept |
Answer: | no, DDR4. |
Question: | How many nails fit into the coil in each charge |
Answer: | No |
Question: | How many nails fit into coli |
Answer: | Yes. The H310 chipset is compatible with 8th and 9th gen core processors. |
Product description
The Max USA Corp super framer SN890CH3/34 strip framing nailer shoots a wide range of fastener from 2" to 3 1/2", plastic or paper collated nails. The SN890CH3/34 features our patented maintenance free end cap filter, weighs only 7Lbs, has a comfortable rubber grip, reduced recoil engineering system, trigger lever lock, and now comes with a rafter hook and a swivel plug.
- Lightweight only 8 lbs.
- Maintenance free end cap filter
- Dial adjustable depth control. Minimum Operation pressure - 70 psi. Maximum Operation pressure -120 psi
- Tangle free swivel plug
- Heavy duty rafter hook
- Aggressive nose for toe nailing
- Trigger lock
- Collation angle 30 to 34 degrees
User questions & answers
Question: | Wiil this shoot 30° paper nails |
Answer: | I find a local Max dealer and ask them. |
Question: | Will this gun fire Paslode RounDrive nails, which are 30 degree paper collated |
Answer: | The carry case for the CN565S3 is a hard plastic. |
Question: | Is this a pneumatic gun? Discription is very confusing |
Answer: | The CN565S3 is a siding nailer and the CN445R3 is a roofing nailer. They do very different functions. |
Question: | Does this nail gun have a switch by the trigger for sequential and bump fire |
Answer: | Yes this took will accommodate both wire and plastic. Make sure they are 15degree nails as the 0 degree plastic will not work. |
Product description
*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
- Dual-speed motor optimized to drive a wide range of fasteners for a variety of applications
- Tool-free selector switch for sequential or bump Fire modes
- Tool-free depth adjustment for precise nail placement
- Stall release lever to reset driver blade in the event of a jam
- Adjustable rafter hook
User questions & answers
Question: | is it possible to use this nailer on dry wall |
Answer: | Yes you can. Just use a smaller nail and adjust the depth. |
Question: | Biene con cargador |
Answer: | Si pero esta herramienta es muy mala mo la recomiendo |
Question: | Do I need the two speed? Those who have the two speed, do you use the second one that is not on the 690? Thanks |
Answer: | Yes. The 2 speed is worth the extra money |
Question: | will this do framing, finishing and brad nails |
Answer: | Only framing nails |
Product description
The 20V MAX* 21 Plastic Collated Cordless Framing Nailer delivers the performance demanded by pro's to get the job done. The DCN21PL can drive a range of plastic collated fasteners up to 3-1/4" and 0.148" in diameter into a wide range of materials. Its compact shape, well-balanced design, and easy-to-operate features make it a highly productive tool capable of getting the job done quickly and efficiently. 100% battery power means you can show up and start working without wasting time setting up a compressor or spending money on costly fuel cell replacements.
- Dual-speed motor optimized to drive a wide range of fasteners for versatility
- Tool-free selector switch for sequential or bump-fire modes
- Tool-free depth adjustment for precise nail placement
- High-strength aluminum magazine with easy-to-operate pusher latch
- Stall release lever to reset driver blade in the event of a jam
User questions & answers
Question: | Does this come nailer come withe batteries and charger |
Answer: | Hi hope this answer your question(s) lol ... Tool kit includes: XP Cordless Framing Nailer, rechargeable lithium-ion battery, lithium-ion battery charger, rugged carrying case, owner's manual, safety glasses, and 5/32 in. hex wrench |
Question: | What nails can i put in this .. thank you |
Answer: | Orange Fuel Cell. I purchased the fuel with the nail pack for the CF325 Model. Fuel and nail packs are matched, and would be ordered by Nail Size (Gauge and Length, and Angle/degree). Example: This worked for my nailer ( https://www.amazon.com/dp/B002NU6HBQ/ref=cm_sw_r_em_apa_LsKHxb16PDPP4 ) |
Question: | can you use the 20/60 volts-9ahdwalt battery or which is the best batery for this nailer |
Answer: | I do not know. I purchase the nails and gas cylinder as a kit. |
Question: | Que medidas de clavos usa y cual tipo debo usar |
Answer: | http://www.paslode.com/product/cordless-xp-framing-nailer/ Go to the above web-site and look at the Spec's. I'm building a new home and purchased this gun. I have had other Battery powered nail guns, and returned them because they were not reliable. Nails (30 degree) are expensive, but you get what you pay for. If your going to be in a remote location I suggest you buy extra gas cylinders and paslode oil. I also have the Paslode Finish Nailer as well. Both products are very reliable and well worth the investment. I give it 5 Stars..... Good luck with your project |
Product description
The max HN90F is a top of the line professional grade Coil framing nailer powered by MAX's 500 PSI PowerLite compressor. The HN90F can be used for framing, Sheathing, Decking, Furring, Siding, subflooring, and crate and box assembly. Backed by the power of a 500 psi PowerLite compressor The HN90F can easily drive nails through the toughest wood (I.E. Lsl, LVL).
- Patented maintenance free end cap filter prevents foreign substances from entering the tool.
- High power. Has enough power to drive nails through LSL & LVL.
- Lightweight- only 5.7 lbs. Approx. 40% lighter than most competitor's tools without sacrificing power.
- Wire or plastic 15 Degree collation
- 1 3/4" To 3 1/2" Length nails
- Tangle free swivel plug to alleviate the tangling of the air hose no matter what angle The tool is being held.
- Load capacity of 300 nails. Shoots up to a 3 1/2" Nail.
User questions & answers
Question: | Does this gun have an air blower like the makita |
Answer: | The round connector is called an "F" connector. It is on all HDTV's with tuners to the best of my knowledge. If your TV has the old screw terminals you'll need a converter box if you can still find them. The cost of the converter boxes is about half of an entry level HDTV. You may find it's time to upgrade. The old TV's can't receive HDTV signals on their own. Also you might find that you have a TV without a tuner. We used to call them monitors and they were used in TV studios. In that case you will still need a converter box or you will have to replace the set. |
Product description
The Max USA Corp super framer SN883CH2/28 shoots a wide range 2-inch by 0.113-Inch to 3-1/4-inch by 0.131-Inch degree wire or plastic collated nails. The SN883CH2/28 features our patented maintenance free end cap filter, weighs only 7-pound, comfortable rubber grip, reduced recoil engineering system, pointy teeth on contact arm, trigger lock lever and now includes a rafter hook and swivel Plug.
- Lightweight only 7.8 lbs
- Anti-double Fire mechanism
- Maintenance free end cap filter
- Dial adjustable depth control
- Tangle free swivel plug
- Heavy duty rafter hook
- Aggressive nose for toe nailing
User questions & answers
Question: | Why is this model so much now expense than the 34 degree nailer |
Answer: | Thanks for your question. You can visit dtv.gov/maps to confirm available channels in Denver area. We provide a 30-day full refund and 30-day warranty for all buyers. With any problem,please email to [email protected] and we would help solve your problem within24 hours. |
Product description
The BOSTITCH BCF28WWM1 20V MAX 28 Degree Wire Weld Cordless Framing Nailer Kit allows you to go cordless with this 100% battery powered framing nailer. This cordless framing nailer drives framing nails up to 3-1/2 in., features a 2-speed motor, and has tool-free depth adjustment and selector to quickly change between sequential and bump-fire modes. It accepts full round offset nails in 28-degree wire weld collation, and also comes with a rafter hook. It also has a stall release lever to reset the driver blade in case of a jam. Pneumatic nailer users can save up to 20 minutes daily in set-up and clean-up time by switching to a BOSTITCH battery-powered nailer. **Frequent gas nailer users could save up to $15 per week in fuel cells and cleaning and lubricating costs by switching to a BOSTITCH battery-powered nailer. Backed by a BOSTITCH 3 year limited warranty. Includes: BCF28WW Wire Weld Framing Nailer, BCF204 20V MAX* High Capacity Li-Ion Battery (4.0Ah), BCB115 Charger, Kit Bag.
- NO COMPRESSOR NEEDED: Save time and money by going cordless
- OPTIMIZATION AND POWER: Brushless motor and engine design includes two speeds for optimized performance and enough power to drive 3-1/2" fasteners
- NAIL SIZE:Accepts full round offset nails in 28-degree wire weld collation
- STALL RELEASE LEVER: Stall release lever to reset driver blade in case of jam
- WARRANTY: 3 year limited warranty
User questions & answers
Question: | Is there an advantage with this nailer over the bostitch cordless nailer that takes the paper tape nails? I am trying to decide which one to buy |
Answer: | I have been very happy with mine. Used to put true 2 inch oak planks down on a barn floor. Nails are pricey but worked way better then trying to fasten them with screws.. |
Question: | Will this work with full round nails |
Answer: | We used it to shoot 51/4 inch nails with no problem at all. Great tool |
Question: | Any chance dewalt 20v batteries fit this gun |
Answer: | If you look near the tip, where the next nail is waiting to be fired, there is only room for a 3 1/4" nail at best. Mine is loaded with 3" now and there's about 3/8" gap below that. You might be able to fit 3 1/2" nails if you machined off some material. But at that point just get a gun that will accommodate longer nails. |
Question: | Will this drive a nail thru 3/8" thick lp smart siding. (hardboard siding)? how many amp hour battery and how long it last? thanks |
Answer: | No, this is a framing nailer |
Product description
Go 100% battery powered with this Cordless Framing Nailer. It drives framing nails up to 3-1/2 in., features a 2-speed motor, and has tool-free depth adjustment and selector to quickly change between sequential and bump-fire modes. It accepts full round offset nails in 28-degree wire weld collation, and also comes with a rafter hook. Pneumatic nailer users can save up to 20 minutes daily in set-up and clean-up time by switching to a Bostitch battery-powered nailer. Frequent gas nailer users could save up to $15 per week in fuel cells and cleaning and lubricating costs by switching to a Bostitch battery-powered nailer. Tool-free selector switch for sequential and contact-actuation modes (for accurate fastener placement and faster application speed, respectively) Brushless motor and engine design includes two speeds for optimized performance and enough power to drive 3-1/2 in. fasteners Includes: 20V MAX Lithium-Ion 28-Degree Wire Weld Framing Nailer,20V MAX 4.0 Ah High Capacity Lithium-Ion Battery - BCF204,Charger - BCB115,Kit Bag.
- This Certified Refurbished product has been tested and certified to work and look like new, with minimal to no signs of wear, by a specialized third-party seller approved by Amazon. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer.
- Stall release lever to reset driver blade in case of jam
Product description
The Max USA Corp super framer SN883RH3 stip framing gun shoots a wide range of fastener from 2" To 3 1/4", plastic or paper collated nails. The SN883RH3 features our patented maintenance free end cap filter, weighs only 7lbs, has a comfortable rubber grip, reduced recoil engineering system, and is ony 11 7/8" Tall allowing for straight nailing between studs. The SN883RH3 now includes a rafter hook, as well as a swivel Plug. There is also a magnet in the nose that ensures the last fastener is shot straight and true.
- Lightweight only 7 lbs
- Nose magnet holds last nail
- Maintenance free end cap filter
- Tangle free swivel plug
- Aggressive nose for toe nailing
- Open nose for easy jam clearance
- Dial adjustable depth control
- Heavy duty steel rafter hook
User questions & answers
Question: | Upto what gauge nail |
Answer: | Buy a new gun , it will cost almost as much to replace the piston . |
Question: | Up to what gauge nails |
Answer: | The SN883RH3 features a new ANSI Compliant Trigger System. The tool comes from the factory with a sequential trigger installed, and also includes a contact fire trigger in the carton box. |
Question: | Where can I buy a replacement piston for the nailer |
Answer: | 21 and 34 degree tools are more common in the United States than the 28 degree. We take great pride in manufacturing our 28 degree, where other manufactures have moved on from doing so. |
Question: | Is it can shot in a row |
Answer: | No. This is a high pressure nailer. 300+ psi. It takes a special HP compressor. I doubt you want a hp blow gun |
Product description
The 20V MAX* 21° Plastic Collated Cordless Framing Nailer delivers the performance demanded by pro's to get the job done. The DCN21PL can drive a range of plastic collated fasteners up to 3-1/4" and 0.148" in diameter into a wide range of materials. Its compact shape, well-balanced design, and easy-to-operate features make it a highly productive tool capable of getting the job done quickly and efficiently. 100% battery power means you can show up and start working without wasting time setting up a compressor or spending money on costly fuel cell replacements.
- Dual-speed motor optimzed to drive a wide range of fasteners for versatility
- Tool-free selector switch for sequential or bump-fire modes
- Tool-free depth adjustment for precise nail placement
- High-strength aluminum magazine with easy-to-operate pusher latch
- Stall release lever to reset driver blade in the event of a jam
User questions & answers
Question: | Does it come with battery and charger |
Answer: | The DCN21PLM1 will accept 2 - 3 1/4 inch 21 degree plastic collated nails. |
Question: | Will this gun take the 60v batteries |
Answer: | I don't know. I have never tried that. I am not sure a B&D 20V would even fit this tool. |
Question: | Why does the hanger suck so bad |
Answer: | Yes it does. Very nice and easy to use. |
Question: | Will this take two strips of nails at a time or just one |
Answer: | Yes and works with ones with out eye balls too! I just got the thing...It works good, but you have to push hard on the nose to get them to go flush. |
Product description
Cordless Framing Nailer Bare Tool Voltage 20.0 Head Style Various Fastener Range 2 in to 3-1/2 In. 30 Degrees Collation Angle Paper Collation Type Shank Dia 0.113 in to 0.131 In. Magazine Angled Magazine Capacity 55 Cordless Tool Battery Type Li-Ion Magazine Loading Lock and Load Depth Control Continuous Adjustment Battery Included No Battery Pack Replacement 21RV47 Battery Capacity 4.0Ah Handle Type Contoured Over Mold Triggering Mode Sequential or Bump Tip No Mar Light No
- Brushless motor and engine design provides the power to drive 3 1/2" nails
- Sequential or bump operating modes
- Dual speed optimizes the motor for different nail lengths
- 33 magazine holds up to 55 paper collated nails
- Maximum initial battery voltage (measured without a workload) is 20 volts; Nominal voltage is 18
- Model number DCN692 and DCN692B are same
User questions & answers
Question: | Can some please give me Amazon link for smallest nail this nailer take thanks |
Answer: | the 60V Max battery will not work on all 20V DeWALT. It will only work on the 20V Max, which this is. |
Question: | Can you use the new 60V Max battery with this |
Answer: | DeWALT does make a 20V finishing nailer but it is not a 20V Max. https://smile.amazon.com/DEWALT-DCN660B-Gauge-Finish-Nailer/dp/B0195KBAVI/ref=sr_1_fkmrnull_6_sspa?keywords=DEWALT+60V+Max+Nailer&qid=1557624867&s=gateway&sr=8-6-fkmrnull-spons&psc=1 |
Question: | I see its a great framing gun but can i use it for finishing nails too |
Answer: | DeWalt Model DCN692B also features a 2 Speed Selector Switch Optimizes Speed for Fastener Lengths. Otherwise, the specifications are the same. |
Question: | What is the difference between the |
Answer: | It’s round |
Product description
The BOSTITCH BCF30PTM1 20V MAX 30 Degree Paper Tape Cordless Framing Nailer Kit allows you to go cordless with this 100% battery powered framing nailer. Its two-speed motor drivers a full range of framing nails, and a tool-free firing mode selector lets you quickly change between sequential and bump-fire modes. This tool accepts clipped and full round head nails in 30-degree paper tape collation. It also offers a rafter hook and a tool-free depth adjustment, along with a stall release lever to reset the driver blade in case of a jam. This 20 volt cordless nailer helps you net savings in time and cost. Pneumatic nailer users can save up to 20 minutes daily in set-up and clean-up time by switching to a BOSTITCH battery-powered nailer. **Frequent gas nailer users could save up to $15 per week in fuel cells and cleaning and lubricating costs by switching to a BOSTITCH battery-powered nailer. Backed by a BOSTITCH 3 year limited warranty. Includes: BCF30PT Paper Tape Framing Nailer, BCF204 20V MAX High Capacity Li-Ion Battery (4.0Ah), BCB115 Charger, Kit Bag.
- NO COMPRESSOR NEEDED: Save time and money by going cordless
- OPTIMIZATION AND POWER: Brushless motor and engine design includes two speeds for optimized performance and enough power to drive 3 1/2 inch fasteners
- NAIL SIZE: Accepts clipped and full round head nails in 30 degree paper tape collation
- STALL RELEASE LEVER: Stall release lever to reset driver blade in case of jam
- WARRANTY: 3 year limited warranty
User questions & answers
Question: | Where do you get the lubricating oil for the piston for this |
Answer: | Judging by your photos, you are using plastic collated nails. These would be 20-21 degree angle. They will not work in this gun. Use the correct nails for proper function. You can't use diesel in a gas engine... same diff. |
Question: | does amazon sell nails for this nailer |
Answer: | When paired with the 4.0Ah battery, this unit is capable of up to 600-800 nails per-charge. |
Question: | What am i doing wrong bought two of these as gifts and none of them work. Cant strike nails more then half way on full and only works when it wants to |
Answer: | Minimum Nail Diameter 0.113 up to a Maximum of 0.148. 21 Degree Full Round Head Strip Plastic or Paper Collated Nails. Maximum Length 2" up to 3 1/4" |
Question: | How many nails can you shoot before the battery needs recharging |
Answer: | Thank you for your interest in MAX Professional Grade Framer. Minimum Nail Diameter 0.113 up to a Maximum of 0.148. 21 Degree Full Round Head Strip Plastic or Paper Collated Nails. Maximum Length 2" up to 3 1/4" |
Product description
The Max "Super Decking" CN665 is designed for decking and sheathing applications. The Rapid Fire Trigger Valve enables the Max "Super Decking" CN665 to drive about 15 nails per second.
- Light weight only 6.2lbs
- Powerful
- Speedy nailing performance
- Dial adjustable depth control
- Maintenance free end cap filter (US Patent 5637125, )
User questions & answers
Question: | can i use it to nail 3/4" plywood onto block with hard case nails? with nail size 1"1/2 x |
Answer: | BCF30PT NAIL SPECIFICATIONS: CLIPPED HEAD/FRO Nail Lengths 2" – 3–1/2" (50 mm – 90 mm) Shank Diameters .113" – .131" (2.8 mm – 3.3 mm) Nail Stick Angles 30° - 33° Shank Types Smooth and Ring Collation Types Paper Tape ONLY |
Latest Reviews
View all
I Phone 5 Charger Cords
- Updated: 03.06.2023
- Read reviews

Roku Remote For Roku Stick 3500X
- Updated: 24.01.2023
- Read reviews

Harmony Fish Finders
- Updated: 22.06.2023
- Read reviews

Augusta Sportswear Gym Bag
- Updated: 02.03.2023
- Read reviews

Mens Leather Belts
- Updated: 28.04.2023
- Read reviews