12 best generic brad nailers

Product description

18 GAUGE 2 IN 1 AIR BRAD STAPLER NAILER GUN 100 CAP BRAD STAPLER A





This Item Is Brand New!



FEATURES



NAILER AND STAPLE: 18 GAUGE

AIR CONSUMPTION: 3.7 CFM

OPERATING AIR PRESSURE: 60-100PSI

AIR INLET SIZE : 1/4 NPT

NAIL LENGTH:5/8"- 2"

STAPLE LENGTH:5/8"- 1-5/8"

LOADING NAIL CAPACITY: 100

LOADING STAPLE CAPACITY: 100

DIE-CAST ALUMINUM HOUSING

360° EXHAUST

MAGAZINE VIEWING WINDOW

INCLUDES:



OIL POT

TWO HEX KEY WRENCHES

NAILS AND STAPLES

CARRYING CASE"

• 18 GAUGE 2 IN 1 AIR BRAD STAPLER NAILER GUN 100 CAP BRAD STAPLER A This Item Is Brand
• New! FEATURES NAILER AND STAPLE: 18 GAUGE AIR CONSUMPTION: 3.7 CFM OPERATING AIR PRESSURE: 60-100
• PSI AIR INLET SIZE : 1/4 NPT NAIL LENGTH:5/8"- 2" STAPLE LENGTH:5/8"- 1-5/8" LOADING"
• NAIL CAPACITY: 100 LOADING STAPLE CAPACITY: 100 DIE-CAST ALUMINUM HOUSING 360° EXHAUST
• MAGAZINE VIEWING WINDOW INCLUDES: OIL POT TWO HEX KEY WRENCHES NAILS AND STAPLES CARRYIN

Product description

This 3 PLUS Brad Nailer drives 18 gauge 3/4” to 2” brad nails. It targets for many different trim work, baseboard and crown molding installation, and other woodworking applications. Its durability, precision nail placement and reliable nail driving power would help you complete job efficiently.

• Uses: 3/4" to 2" 18-gauge brad nails
• Tool free adjustable depth of drive for consistent and controllable nail fit
• Narrow nose design allows easy nailing access in confined areas
• Lightweight composite plastic magazine weighs 1/3 less than conventional aluminum one
• Quick clear jam release functions for great ease of use. 360° adjustable exhaust keeps air away from your face during working.

User questions & answers

Question:	Can this be use on 3/4" hardwood floor
Answer:	Yes. You will need an air compressor and an air hose. The hose comes with connectors on each end.
Question:	What about replacement parts
Answer:	We used whatever brand Home Depot carries!! It’s a great nail gun!! For the money worth it!!
Question:	Do you need a quick connector to connect to air compressor
Answer:	The question confuses 2 different paper sizes. "Legal Size" is the name given to 8.5" x 14" paper, which has the same width as standard "letter size," but is 3 inches longer. Most sheet-fed scanners that scan ordinary "letter size" will be able to scan "legal size." Thus my ScanSnap S1500 (as well as the above-mentioned S1300i) easily scans legal-size paper.Another paper size, 11" x 14," which is both wider and longer than letter size, is sometimes used to make large photographic prints or small posters; as far as I know, it has no common name. Most consumer scanners (both sheet-fed and flat-bed) are NOT wide enough to scan this paper. Scanners that handle this size are much more expensive; commercial photocopy centers (and my local library) have these scanners.
Question:	what brand of brad nails and staples does this use
Answer:	no it will not send scanned pages to different folders. It puts your scanned pages into a folder you specify and it becomes a searchable pdf. I personally scan everything into one folder and if you ever need to retrieve something you type in (Alliant Energy) and it brings up every document that has those words on them

Product description

The Ryobi 18-Volt ONE+ System presents the next generation in cordless convenience. This 18-Gauge brad nailer features Airstrike Technology, which eliminates the need for noisy compressors, bulky hoses or expensive gas cartridges. This means faster setup and easier maneuvering on the job site. The Ryobi P320 AirStrike Brad Nailer drives 18-Gauge nails from 5/8 in. to 2 in. L. This item is removed from retail packaging for shipping purposes (Bulk Packaged) and will arrive in a generic box.

• Tool-free depth-of-drive adjustment helps protect work surface and allows proper setting of nail heads
• Contact actuated mode for production speed up to 60 nails per minute
• Dry-fire lockout feature extends tool life
• Toolless jam release for easy access to clear nails
• This item is removed from retail packaging for shipping purposes (Bulk Packaged) and will arrive in a generic box.

User questions & answers

Question:	What is the part number of the battery
Answer:	Yes, but a proper flooring gun would be better. This will shoot through the flooring, but the nails may buckle going through knots or denser parts of the hardwood.
Question:	Does this have the 1.3Ah battery? And is it a new item with 1 yr warranty
Answer:	I would assume the manufacturer. There has been no problem with my nailer. So far it has done well. Hope this helps

• This Certified Refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, a minimum 90-day warranty, and may arrive in a generic box. Only select sellers who maintain a high performance bar may offer Certified Refurbished products on Amazon.com

User questions & answers

Question:	Will this drive brads through hard wood into hard wood as well
Answer:	Each is approximately 7.5 inches wide x 1.5 deep (front to back) and .5 inches high (top to bottom)
Question:	What's the amps on the batteries
Answer:	7 1/2 inches long 1 3/8 wide 5/8 thick good strong magnets to hold them up
Question:	Does this nailer shoot brad nails AND staples
Answer:	Have you upgraded the wonky usb connection to the lighting unit? Second one is about to get tossed. A great idea but poor operation. Send me a new cable and it might work
Question:	Can this nailer shoot 23 guage pin nails
Answer:	There should be three strips of iron/steel with each package of three. If you intend to put one of the lights on something that is iron or steel, such as a refrigerator or stove, you do not need to use the magnetic strip. The magnets are built into the lights.

Product description

The Ryobi P320 brad nailer has comparable power to some gas-powered nailers and the convenience of a cordless power tool. Any nailing job you may need to perform around the house, from installing roofing tiles to reinforcing joints, can be accomplished with the P320. On a single charge of a 4 amp hour battery from Ryobi’s One+ system, you can fire up to 700 nails up to 50 millimeters long. Adjust your depth with an onboard dial so you do not have to worry about fiddling with extra tools. Be sure to see what you are working on with the built-in LED lighting, and keep it handy with the attached belt clip. Get what you need to get done with the P320. It’s built for work, so get to it.

• Drives up to 1700 nails per charge
• No compressors, hoses or pricey gas cartridges required. Cordless design offers both convenience and superior performance.
• Convenient adjustment dial regulates air pressure for optimum results.
• Low-nail indicator to quickly and easily see when it is time to reload
• Includes: 18-V ONE AirStrike 18-Gauge Cordless Brad Nailer, Battery sold separately

User questions & answers

Question:	How does this perform on solid hardwood like oak or maple? My 18g Paslode performs great but I'm tired of fuel cells, and expensive repairs
Answer:	How much do you spend on repairs and fuel cells? do the math and see if it make sense for you. There is no ongoing cost for this exept nails and it seems to work pretty good, Im sure it would preform well on solid hardwood (it will go through a formica countertop no problem and into wood below it). It's a semi precision tool and it wont take much abuse, but overall it really has alot more power than i thought it would. I'd say go for it.
Question:	What kinda nails does it use, e.g. Bostitch, Freeman, etc
Answer:	I cannot get my 320 to work with Porter Cable 16 gauge x 2" "Straight Finish Nails." They have a slight "head" to the nail and it seems to stop the gun from working. I've tried adjusting the pressure with no effect.
Question:	which battery and why doesn't Amazon have a link for that under Frequently bought together
Answer:	I don't know how you can do the whole house with one battery, I change batteries every 10 minutes, I would like to know what battery you have so I can order it
Question:	Will it work with 16D framing nails
Answer:	No it will not. It only works with 18 gauge straight brads. Ignore stop_go_boom's response, as the P325 uses 16 gauge brads, and 16 gauge is not the same as 16D. Look for a framing nailer. This is more suited to light trim work.
Question:	What power does this brad nailer run on
Answer:	This nailer runs on Ryobi 18v one+ battery.
Question:	can you used it for framing
Answer:	Not for Framing this is a finish nailer
Question:	Can you adjust for the depth the nail goes into the wood
Answer:	Yes. There is a dial which works easily. I love this brad nailer!
Question:	Can you adjust for the depth the nail goes into the wood
Answer:	After speaking with the vendor, They confirmed that you can adjust nails anywhere between 5/8 - 2 in. What you would do is dial the knob that's on the right side of the tool.

Product description

The PORTER-CABLE PCC790LA 20V MAX Lithium 18GA Brad Nailer Kit is 100% battery powered which eliminates need for compressor, hose or costly gas cartridges. The special motor design provides consistent firing power into various materials and climate conditions. This nailer features multiple tool free settings to provide increased productivity and user safety. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions reducing user fatigue. It also offers multi functional dual LED lights to light up your workspace, and indicate errors. Fastener length capacity of 5/8" - 2", magazine capacity of 100, with sequential firing mode and trigger lock. Includes Battery, and Charger.

• NO COMPRESSOR NEEDED: This cordless brad nailer is battery powered, eliminating the need for a compressor, hose, or expensive gas cartridges.
• CONSISTENT DRIVING DEPTH: Our depth adjustment wheel allows you to properly countersink nails consistently. Nail Diameter: 18 gauge
• INCREASED PRODUCTIVITY: A tool free release lever, jam release, and depth adjustment wheel make your life easier.
• BETTER RUNTIME: Included 1.5 Ah 20Volt MAX Lithium ion battery lasts longer than NiCad, charger included. Integrated Belt Hook: Yes
• 3 YEAR LIMITED WARRANTY: PORTER CABLE will repair, without charge, any defects due to faulty materials or workmanship for 3 years from the date of purchase.

User questions & answers

Question:	Does this come with a charger
Answer:	This one does come with a battery & charger, but they sell a model without a charger
Question:	Would this tool work to repair my fence
Answer:	Sure it can repair your fence and build you new fences too I use it every day for at least two hours . Great tool I have not use my compressor from I bought this tool. But do not use the nailer alone use screws too.
Question:	Will it go through 1" oak trim
Answer:	yes
Question:	can i use multiple lengths of nails
Answer:	5/8 inch through 2 inch nails....awesome gun...i am so happy with it

Product description

Remember when you could build whatever you wanted? Nail nails and fasten fasteners with the WEN 18-Gauge 2-Inch Pneumatic Brad Nailer. Fire 18-gauge brads anywhere from 3/8 to 2 inches in length. Our spring loaded magazine makes for quick and easy reloads with enough space to hold up to 106 nails. The lightweight body combined with the rubber-lined handle limit fatigue during long days on the job. Operating pressure ranges rom 60 to 115 PSI with the nailer consuming 0.028 CFM of air per nail at 88 PSI. The 1/4-inch NPT air inlet allows for quick connection to your favorite air compressor. Adjust the firing depth of the nailer with the simple turn of the depth adjustment wheel. Check the amount of remaining nails through the gauge window mounted on the side of the magazine. Unlatch the front nose to clear jams quickly and easily. Adjustable air exhaust lets users direct the pneumatic air output in any direction while the powder-coated finish prevents wear and tear to the nailer’s body. This package also includes lubricating oil, hex keys, 500 3/8-inch nails, 500 3/4-inch nails, 500 1-inch nails, and 500 2-inch nails. And, because its a WEN product, your nailer comes backed by a two-year warranty and a friendly customer help line all to make sure you remember WEN.

• Shoot 18-gauge brads ranging from 3/8 to 2 inches in length
• Operate at 60 to 115 PSI with the 1/4-inch NPT air inlet fitting
• Features a depth adjustment wheel, a nail gauge, a rotatable exhaust, and a quick release 106-nail capacity magazine
• Hassle-free nose latch makes clearing jammed nails quick and easy
• Includes 500 18-gauge 3/8-inch nails, 500 18-gauge 3/4-inch nails, 500 18-gauge 1-inch nails, and 500 18-gauge 2-inch nails

User questions & answers

Question:	Can I use this to put on a board & batten wall? 3” strips, 1/2” thick
Answer:	Yes. It comes with various nail sizes to fit that job.
Question:	Does the one that comes with 500 nails include a case
Answer:	A case does NOT come with the WEN 61721 (with 500 nails option).
Question:	Es electrica o de compresora
Answer:	Con comprensión
Question:	Does this have a metal magazine? I have Hitachi that broke twice from light use due to magazine being plastic
Answer:	Yes the magazine is metal. This is a great tool

Product features

Hassle-free Nose Latch

The nose latch makes cleaning jammed nails quick and easy.

Adjustable Exhaust Port

Adjust the air exhaust to direct the pneumatic air output in any direction.

Depth Adjustment Wheel

Adjust firing depth of the nailer with a simple turn of the depth adjustment wheel.

Spring Loaded Magazine

The spring loaded magazine makes for quick and easy reloads and holds up to 106 nails.

Product description

The lightweight Metabo HPT NT50AE2MR 2 in. 18-Gauge Brad Nailer is an ideal tool for small carpentry projects. It features a high-capacity magazine, exhaust vent, easy depth-of-drive adjustments, and a removable nose cap for prolonged tool life. This pneumatic brad nailer will help you tackle everything from cabinet installation and picture-frame assembly to furniture construction and finish work. At only 2.2 lbs., this finish nailer is lightweight and well-balanced making it easy to use all day long Visual nail reload indicator located on the magazine, alerts the user when nail quantities are low so that blank drives are avoided Engineered with the safety behind the narrow nose piece, and a short center height allows for nail placement in hard to reach areas and corners No-mar tip on the nose protects the work piece from unintended markings 360 Degree adjustable exhaust port keeps dust, debris and oil off the finished project Lightweight aluminum body and composite magazine provide a tool that reduces user fatigue Includes: 18-Gauge 2 in. Finish Brad Nailer - NT50AE2MR,Safety Glasses - 875769,Air Fitting,No Mar Tip - 881751,Hex Bar Wrenches,Carrying Case - 885676.

• This Certified Refurbished product has been tested and certified to work and look like new, with minimal to no signs of wear, by a specialized third-party seller approved by Amazon. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer.
• Accepts 5/8 in. to 2 in. 18-gauge fasteners
• Tool-less easy to clear nose for quick and simple nail extraction should a nail jam during use
• Elastomer grip adds comfort and prevents slippage
• Depth of drive dial allows the user to easily adjust the drive depth for a professional finish

• 📢Friendly customer service: we provide new replacement instead of repairing.
• FOR FREE---Tools includes 200 staples and 800 brad nails.
• 🔰CONVENIENCE --The wire 2-in-1 brad gun/staple gun doesn't need compressors, hoses for convenience use.
• 🔰WIDE APPLICATION -- The upholstery nail gun ideal for softwood DIY projects such as Carpentry DIY, picture framing, door or window molding installation, pet house DIY while not recommended for quarter round, baseboard, drywall installation, roofing and flooring.
• 🔰FLAWLESS FINISH -- Non-Marring rubber nose provides a complete finish.
• 🔰FRIENDLY USE -- The wire 2-in-1 brad gun/staple gun equipped with ergonomic soft-grip handle for reducing worker fatigue.
• 🔰ADJUSTABLE POWER -- This electric brad nailer designed with adjustable power function for light-duty project.

User questions & answers

Question:	Mine will fire but it wont shoot any nails and i have not even used it for a day
Answer:	I could get mine to shoot, but it wouldn't go into soft trim more than 1/8 inch. That was maximum depth... Most were less than half that. I sent it back.
Question:	Repairing rattan rawhide bindings. Will this shoot 23 GA, 3/16" crown, 3/8" leg
Answer:	Hello Customer, No, this electric Brad Nailer/Stapler drives 18 GA brad nails up to 1-1/4'' inch and 1/4'' crown staples up to 1". Using improper nails/staples may cause operational problems. Hope this can help you. If there is anything issue we can help you, please do not hesitate to contact us via [[email protected]] and we will reply to you ASAP. Spartatool Support Team
Question:	podrias especificar con que grapas es compatible y donde se puede adquirir las grapas
Answer:	Puedes conseguir las en Walmart o cualquier ferretería. A mi me a sido muy útil.
Question:	Electric brad nailer, neu master ntc0040 electric - does this model drive 1”, 1 1/2” and 2” brads
Answer:	Hello Customer, The longest brad nails can be used for this electric brad nailer/stapler is 1-1/4''. And this length is recommend for soft wood. Hope it can help you. If you have any issue or need help during use, please do not hesitate to contact us via [[email protected]] and we will do our best to serve you. Spartatool Support Team

Product features

Product Overview

The NEU MASTER NTC0040 Electric Brad Nailer/Stapler drives 18 gauge brad nails up to 1-1/4'' inch and 1/4'' crown staples up to 1" which makes it ideal for general repairs, craftwork, interior or exterior decorative lightweight trim, upholstery, and more. No compressor needed and the nail gun features a quick-release mechanism and an overmolded grip for convenient use. Kit includes a Brad Nailer Stapler, 400pcs 5/8'' brad nails, 400pcs 3/4'' brad nails and 200pcs 3/4'' staples.

• Drives nails and staples
• Ergonomic grip for comfort and control
• Power adjustment dial and oversize trigger
• Quick-release mechanism
• Contact safety with non-marring nose provides a flawless finish

Product description

This item is removed from retail packaging for shipping purposes (Bulk Packaged, No Retail Packaging) and will arrive in a generic shipping box

• AirStrike Technology provides cordless convenience, eliminating the need for a compressor and bulky air hose
• Toolless depth-of-drive adjustment helps protect work surface and allows proper setting of finish nails
• Dual chemistry charger charges 18V ONE+ batteries in as little as 1 hour
• Indicator lights show status as batteries are charged and maintained
• This item is removed from retail packaging for shipping purposes (Bulk Packaged, No Retail Packaging) and will arrive in a generic shipping box

User questions & answers

Question:	Will my 16-guage finish nailer shoot 18-guage brads
Answer:	No, just a fully charged battery and lots of 16-gauge finish nails.
Question:	will this shoot staples
Answer:	There are a few numbers on it. Most likely the part# is P102. But there’s also a 130429135 that could help.
Question:	Does this product require any other items to make it work -- i.e. cartridges of any kind
Answer:	Yes on the amperage but I have no idea about the warranty.

Product description

Ryobi ONE+ 18-Volt Lithium-Ion Cordless Combo Kit with Brad Nailer (5-Tool)

• This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box

User questions & answers

Question:	which brad nailer
Answer:	Yes, it comes with two batteries and a charger.
Question:	Does the brad nailer accept 2" brads
Answer:	Yes it came with 2 batteries and a charger. I love mine. Well worth the money.
Question:	Does this come with batteries
Answer:	No
Question:	Does this set come with a battery and charger
Answer:	No it’s a finish nailer

Product description

Sfr2190 features: -Framing nailer. -360° adjustable exhaust. -Finger depth adjustment. -Ergonomically designed comfort grip. Type of nailer: -Framing nailers. Type of fastener: -Framing nails. Generic dimensions: -20.75'' h x 15'' w x 5.75'' d. Dimensions: Overall height - top to bottom: -20.75 inches. Overall width - side to side: -15 inches. Overall product weight: -8.5 pounds.

• Nailed It: This 21 degree pneumatic framing nailer features a lightweight and durable magnesium body, ergonomic secure handle, and interchangeable trigger for quick fire or single shot function. It's ideal for professional construction contractors and home DIY projects.
• Versatile and Powerful: The framing nailer features depth adjustment and a no mar tip, making it adaptable for different working surfaces. It's perfect for framing, and it can also be used to install subfloors, roof decking, wood fencing, and sheathing.Minimum Recommended Air Delivery SCFM @ 90PSI:2.4
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	will it take any brand of nails
Answer:	I have used two different brands so far. As long as the nails are plastic coated, 21 degree I believe any brand would work. The best prices I have found on nails is at harbor freight. 2500 nails for around $28. I have used 2 1/2" and 3 1/2"
Question:	How come just below the nailer specs they say "often bought with this product"....22 degree nails....not
Answer:	I used some of the 22 degree without a problem. I've used Bostich guns for 30 years prior to this gun & this is as good as any I've used.t's a great nailer
Question:	do the nails have to be plastic coated
Answer:	Plastic coated? No. But I do believe they have to be Plastic Collated, that is, they need to be bound together with plastic. I'm not sure if paper collated nails will work.
Question:	What kind of air compressor do you recommend for this nailer
Answer:	It really depends on how you're using it. If you're intermittently nailing with in and not imitating a machine gun- you can use a pancake or similar small compressor. The working pressure of the nailer is 70-115 PSI. I run mine at 100 PSI. Any portable compressor should be able to hit that pressure. The real question is duty cycle. If you're nailing every few seconds then you'll need a compressor capable of keeping up with the volume of air being consumed OR you'll have to slow down until your compressor stops running before firing the next nail. I run mine on 2 different compressors and don't have any issues- one is a 40 gallon shop compressor- the CFM is infinite compared to the gun. The other compressor is 2.6 CFM. I don't rapid fire when I'm using it and I can fire several nails before the compressor has to cycle. As long as you're not continuing to fire when the compressor is running you should be OK.

Product features

Numax 21º Full Head Framing Nailer

It's time to tackle a new project - and we have just the tool to get it done. The SFR2190 is perfect for framing, but did you know you can also use a framing nailer to install sub-floors, roof decking, wood fencing, sheathing, and more? We designed this nailer with you in mind, so it has all of the premium features you need to get started.

Step 1: Choose Firing Mode

Your framing nailer comes with a black single-fire trigger already assembled. This is the best choice if you haven't used a framing nailer before, or if you want accurate nail placement.

Follow the manual instructions to install the red bump-fire trigger if you want quick successive firing.

Step 2: Connect to Compressor

Set your compressor to 70 PSI and use the quick-connect fitting on your air hose to connect your framing nailer. If you have a really dense material, you can increase the pressure up to 115 PSI.

Put a few drops of oil into the fitting before connecting to a compressor to keep things running smoothly!

Step 3: Load Nails

Pull the side lever back along the magazine until it snaps into place.

Drop the nails into the open channel on the top of the magazine. The angle of the nails should match the angle of the nose of the nailer.

Lift the lever at the back of the magazine to release the side lever and secure the nails.

Step 4: Adjust and Go!

This nailer is loaded with features that let you customize for any project. Change the depth adjust, 360º air exhaust, or remove the no-mar tip for extra holding power.

Pro Tip: Use piece of scrap material to test out your nailer before starting on the real thing!

21º Plastic Collated Full-Head Framing Nails

A 'plastic collated nail' just means that the nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the SFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.