13 best bostitch framing nailer

Product description

The BOSTITCH BTF83WW 28 Degree Wire Weld Framing Nailer provides the user with power and efficiency. The low profile design allows the nailer to be used in small areas. The versatile trigger drive selector enables the user to select from single or multi-drive modes. The fastener’s depth is controlled by the tool-free depth drive adjustment. 840 In-Lbs of pressure is concentrated to powerfully send the fastener into the material. Power and versatility make this nailer an essential tool for the jobsite. Replacement to the BOSTITCH LPF21PL Nailer. 7 Year Limited Liability Warranty

• Low profile design with enhanced ergonomics and balance for comfort and control.
• Powerful enough to drive into engineered lumber.
• Industrial grade design for high volume framing and sheathing applications.
• Tool free features: depth of drive adjustment, selectable trigger for single drive or multi drive actuation modes, adjustable rafter hook.

User questions & answers

Question:	I have nails for a bostitch nail gun but don't have the gun. which gun will shoot s16d131gal nails the box says for use in n 16,n80s,n100s andn100s
Answer:	Must be the same degree, 28 gun & nails
Question:	Is this made in usa
Answer:	The BTF83WW is manufactured in Taiwan.
Question:	The technical details list the tool weight as 3 lbs is this correct for bostitch btf83ww wire weld framing nailer
Answer:	Tool Weight: 7.9 lbs
Question:	Is this 3 1/4" or 3 1/2" max length
Answer:	3” to 3 1/4 max length

Product description

The product is RND Head Framing Nailer. Easy to use. The product is manufactured in China. Magazine Loading - Bottom Load

The Bostitch F21PL Round-Head Framing Nailer is the ideal tool for framing, sheathing, subflooring, and bracing jobs. Perfect for professionals and weekend warriors alike, this nailer features a strong, lightweight magnesium body, quick-change nosepieces for plastic-collated and metal-connector nails, a 16-inch layout indicator, and more.

Designed to Match the Task at Hand

The recommended tool for use with HurriQuake disaster-resistant nails, the F21Pl has a patented feature that lets you set nail depth with the simple push of a button. For further convenience, quick-change nosepieces let you switch from plastic-collated framing nails to metal connector nails in seconds.

The high-capacity magazine holds up to 60 plastic collated 21-degree framing nails (2.0-3.5 inch) or 60 metal connector nails (1.5-2.5 inch). Its 16-inch layout indicator, located on the magazine, lets you know at a glance the correct distance between studs.

And with an adjustable rafter hook, you can conveniently hang the nailer on joists and rafters during work breaks.

Best-in-Class Power-to-Weight Ratio

The magnesium construction of the F21PL Round-Head Framing Nailer means this tool is light enough to use all day, while still being strong enough to reliably use again and again. It also means that this tool has the best power-to-weight ratio in its class: 1,050 in./lbs. to 8.1 pounds.

The Bostitch F21PL Round Head Framing Nailer works with a standard air compressor and is backed by a seven-year limited warranty.

About Bostitch

Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box

Framing nailer and two quick-change nosepieces.

From the Manufacturer

Magnesium plastic collated framing nailer / metal connector nailer. This new framing nailer drives 1-1/2- to 3-1/2-inch framing nails and comes with an interchangeable tip for placing nails accurately for metal connector applications. You get the benefit of two tools in one, no other competitive framer can match that. This light weight tool is also one of the most powerful framers with 1050 in./lbs. of driving power. It is able to tackle even tough engineered lumber applications. Tool also includes bolt on steel wear guards with integrated rubber skid pads, and printed magazine with scale and 16-inches-on-center layout feature. New smart trigger works as a sequential and bump fire trigger base on how you actuate the tool.

• Compressor/Air Tool Features: Fastener Collation,Fastener Depth Control, 1 1/2 inch to 3 1/2 inch framing nailer; 1,050 inch pounds of driving power; sequential and bump trigger
• 2 nailers in one: includes 2 quick change nose pieces, converts to framing or metal connector applications
• Lightweight magnesium housing; integrated rubber skid pads; rubber grip
• Includes 1 framing nailer; Power Source: Pneumatic
• 14 1/4 by 20 1/2 inches; 8.1 pounds.Operating Pressure:80 120 psi
• 1 1/2 inch to 3 1/2 inch framing nailer; 1,050 inch pounds of driving power; sequential and bump trigger
• 2 nailers in one: includes two quick change nosepieces, converts to framing or metal connector applications

User questions & answers

Question:	Is it true that the hammer is only "positive placement" for nails up to 2.5" long
Answer:	Yes, pp tip for nails up to 2.5" in length. Framing tip for up to 3.5"
Question:	How is it powered? Is it pneumatic or battery operated and/or use compressed gas cylinders
Answer:	It is pneumatic. I've been using a 6 gal Campbell Hausfeld compressor with 1/4" quick disconnects at about 90 - 100 psi for metal connectors and 16d nails and have never run out of air. I bought it mainly for the metal connector ability, which it does great, but is also great for down to 6d nails. Just turn down the pressure on the smaller nails.
Question:	Is it difficult to find nails for this hammer
Answer:	Metal connector nails need to be larger around to fit properly in the holes and have the shear strength. If the nail is longer than 2-1/2 inches the gun will not fire by design. I can only find the 1-1/2 21 degree nails on Amazon and Home Depot online. They are expensive, but surprisingly, I tried some 33 degree 1-1/2 inch nails in this gun and it fires normal. I don't see any wear as a result either. I would not try this with longer 33 degree nails because they would angle out of reach of the driver. The gun out performs my old Senco SN60 by a large margin, is lighter, but about an inch taller.
Question:	What is the difference between a round head and a clipped head nailer
Answer:	The round head is the traditional type nail you would find in a box or bin of nails. The clipped head is the round head clipped off to the width of the nail shank on two sides--does not had the holding power of the round head.

Product features

BOSTITCH F21PL

This 21-degree Plastic Collated Framing Nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a push button.

Features:

• Two nailers in one: includes two quick change nosepieces to convert tool to either framing or metal connector applications
• Patented push button adjustable depth guide sets nails to desired depths
• Lightweight magnesium design for durability
• Adjustable rafter hook allows users to hang tool on rafters and joists

Product description

Air Framing Nailer, Angled, Offset Round Head Style, Collation Angle 28 Degrees , Collation Type Wire, Fastener Range 2 In. to 3-1/2 In., Shank Dia. 0.113 In. to 0.131 In., CFM per Shot 0.075, Required Pressure 70 to100 psi, Max. Pressure 120 psi, Magazine Capacity 100, Sequential Firing Mode, Adjustable Exhaust, No-Mar Tip, Housing Material Magnesium, Yellow Color, Air Inlet 1/4 In. Male, Length 20 In., Width 5-1/8 In., Height 14-1/4 In., Tool Weight 7.70 lb.

Framing, siding, decking, attaching wood to masonry, you name it, this versatile and lightweight framing nailer from Bostitch does it all. This nail gun is equipped with a patented pushbutton adjustable depth guide that sets the nail to desired depths quickly and conveniently. A depth-of-drive control of course means there’s no adjusting compressor pressure, but also that you don’t have to fumble for tools when you’re standing on a steep roof. Just set the compressor at 80 psi and adjust the depth as needed.

Weighing just 7.6 pounds, the tool handles great in tight quarters like attics and during otherwise shoulder-burning overhead tasks. The innovative design is a big plus when nailing top plates to floor joints or when crawling under that low deck to reinforce the new hot-tub. A factory installed sequential trigger and Bostitch’s exclusive Smart Trigger ensure optimal control and faster production. The trigger works as either a sequential or bump fire trigger. A notched, 16-inch layout indicator on the magazine helps achieve correct distance between studs in a matter of seconds. And, a lightweight magnesium housing means easy handling and unsurpassed durability

.

The unit drives 2- to 3-1/2-inch wire-collated framing nails. One of the most powerful framers on the market, this nailer features 1,050 inch-pounds of driving power for tackling even toughest engineered lumber applications. And, bolt-on, steel wear guards with integrated rubber skid pads protect the tool from bumps and drops for durability and years of use.

--Brian D. Olson

From the Manufacturer

This new framing nailer drives 2- to 3 1/2-inch (.113 to.131-inch) framing nails. This lightweight tool is also one of the most powerful framers with 1050-inch-pounds of driving power. It is able to tackle even tough engineered lumber applications. The tool also includes bolt on steel wear guards with integrated rubber skid pads, and printed magazine with scale and 16-inches on center layout feature. New smart trigger works as a sequential and bump fire trigger base on how you actuate the tool.

• The product is Stick Framing Nailer
• Easy to use
• The product is manufactured in United States
• 28 degree Wire Collated Stick Framing Nails. Thread Fitting Type 1/4 inch NPT. Magazine Capacity 100 Nails
• Compatible with 28 degree wire collated framing nails, offset round and clipped head
• 2 to 3 1/2 inch framing nailer
• Driving power: 1050 inch pounds; pushbutton depth of drive

User questions & answers

Question:	Is this a 28° nail gun
Answer:	Yes, F28WW is a 28° Framing Nail Gun.
Question:	will this gun shoot paslode 3" tapered , paper connected nails
Answer:	I'm not sure. The gun calls for 28 degree nails and they aren't the easiest thing to find. I understand people have used other nails but I don't know which ones. I don't know how often they jamb or about the long term effect on the tool.
Question:	I have B12D nails.. will they fit this gun
Answer:	I do not know what a B12D nail is for: Stanley Bostitch S12D131-FH 3-1/4x.131 Nail, 2000-Pack; are the correct 12 d nail, they have to have the 28 degree slant to the nail stack.
Question:	Why is this nailer listed as a Bostitch F28WW clipped head 2-inch to 3-1/2-inch framing nailer but the picture shows a Bostitch F33PT
Answer:	unfortunately, many times the pictures on Amazon do not match the model number of the product. They actually warn you against this. We did not upload this picture, so we cannot change it, sorry.

Product features

BOSTITCH Framing Nailer, Clipped Head, 2-Inch to 3-1/2-Inch (F28WW)

This 28-degree wire weld framing nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a push button. Depend on this 28-degree wire weld framing nailer for efficiency.

• Framing
• Sheathing
• Siding
• Trusses
• Bridging
• Wood to masonry
• Engineered lumber
• Fencing
• Exterior decks

Features

• Patented push button adjustable depth guide sets nail to desired depths quickly and conveniently
• Notched 16" layout indicator on magazine helps achieve correct distance between studs in a matter of seconds
• Lightweight magnesium design for durability
• Adjustable rafter hook allows users to hang tool on rafters and joists

Product description

The product is Coil Frame Nailer. Easy to use. The product is manufactured in Taiwan.

A popular model among builders who work on high-repetition projects like trusses and prefabricated frames, Bostitch's utility coil nailer offers huge capacity and solid reliability. When fully loaded, this nailer certainly isn't the lightest tool you could choose, but when you can drive 300 nails without having to reload, you quickly appreciate the timesaving capacity. With its aluminum housing and composite canister, this gun is a tough piece of equipment, designed to hold up to bumps and falls--the inevitable beating nailers take on a job site. The nailer's aggressive teeth easily grip lumber for toe-nailing. An adjustable deflector conveniently directs exhaust away from the user, and a quick-release canister makes loading new coils a snap. We were impressed with how solid the whole unit feels--it has the burliness of an industrial-strength machine. This model shoots 1-1/2- to 3-1/4-inch, 15-degree, wire-weld-collated, full-head nails, and weighs just over 8 pounds empty. Note: this model does not have adjustable drive depth. --Jonathon Tudor

• The product is Coil Frame Nailer
• Easy to use
• The product is manufactured in Taiwan
• Powerful coil framing nailer for framing, seathing, subflooring, roof decking, siding, and fencing
• Contact-trip trigger; large-capacity magazine
• Aluminum housing
• Accomodates nails from 1-1/2 to 3-1/4 inches
• Weighs just 8 pounds; 7-year warranty; made in the Taiwan

User questions & answers

Question:	can someone explain why the canister adjusts up to 4" nails but, it can only handle up to 3 1/4" nails
Answer:	With a noise reduction rating of 21, as compared to the 22 of the popular Peltor TAC 100 model, the RangeGuard offers solid, consistent hearing protection. If you're shooting indoors, using an extremely high caliber weapon, or are surrounded by a significant amount of gunfire, your hearing may be compromised. Outdoor protection is excellent, and under most circumstances you are assured of being fully protected. After over 100 hours of use with the RangeGuard (both indoors and outdoors with a wide variety of firearms), I never experienced any kind of noteworthy shortcomings in the noise reduction of the model. As stated, under some circumstances you may feel the audio coming in a bit louder than you'd like, but the average gun owner will never need a stronger model.
Question:	Can I use it for solid hardwood flooring
Answer:	Yes, very easily. They even amplify sounds and make them easier to hear (but not loud noises like gunshots). They have a microphone on each earpiece so you can easily distinguish where sounds are coming from.
Question:	Is this a good framing nailer
Answer:	They'll only "work" if you turn them off. As someone who actually owns these headphones, no - they will not work for lawn mowers. Unless, of course, you turn them off, in which case you're paying a premium for muffs with a microphone and speakers in them. The headphones pick up all outside noise using two forward-facing microphones so that you can "hear" while you're wearing them. The cutoff circuit only engages when it picks up a sudden, sharp noise - like a gunshot, an air nailer, or a hammer blow. Continuous loud noises such as heavy equipment, power tools, saws, airplanes, etc... do not trigger the cutoff and in many instances can *amplify* the noise.
Question:	Will this fit 1 1/2" or 1 3/4" roofing nails
Answer:	These are teal the others are camo green. That's about it.

Product description

Duty Timber 51/8 inch Framing Nailer Drives plastic collated framing nails for timber framing and crating. Toolfree adjustable exhaust to direct air away from users. Smooth trip design for fast cycling. Secondary handle for improved ergonomics and control. Builtin hanging hook for highproduction. No nail lockout to prevent dry fi res and extend tool life.

• Drives plastic collated framing nails for timber framing and crating
• Tool-free adjustable exhaust to direct air away from users
• Smooth trip design for fast cycling
• Item Package Dimension: 21.5" L x 18.4" W x 6.8" H

User questions & answers

Question:	What size air fitting does this nailer use
Answer:	The main differences are Size and Noise Reduction.The Sport model has a noise reduction rating of 22dbThe PRO model has a Noise reduction rating of 30dbBecause of extra noise reduction provided by the PRO version, they have a much larger profile.The larger size COULD be in the way if your using them with a rifle, if you use a handgun, the size should not be an issue.In my personal opinion if the larger "bulk" is not an issue then go for the maximum protection you can get!Your hearing will thank you!
Question:	This seems like a good deal! Whats wrong with the Gun
Answer:	NO. I think some are having trouble understanding the concept. The sound will be reduced by the same amount with the unit turned on or off. That's passive unlike active like noise-cancelling muffs like Bose. When turned on, it will amplify sound below 82db. (A busy street is more than 82db) Anything below 82db, like a range instructor's commands, will be amplified and you can turn the volume all the way up and leave it their. When a sound is above the cutoff of 82db, like a gunshot, the mics will shut off and go back into passive mode until the sound drops below the cutoff, and then go back to amplified mode. The mics will never amplify a sound greater than the cutoff of 82db. Hope this helps.
Question:	Will this gun shot 4" ring shanks? Looking to use it to attach 2x6 girts to laminated posts. Was looking at the fasco jumbo nailer but like the price
Answer:	I can fit them under a large size ACH. I usually where a mediun ACH. They get pushed down a little bit but there is still enough movement to get a cheek weld.

Product description

Lightweight magnesium design for added durability. Patented push-button adjustable depth guide sets nail to desired depths quickly and conveniently. Coil magazine hold up to 300 nails for high production applications. Aggressive wear guards protect the tool from damage on abrasive surfaces. Adjustable exhaust directs air away from the user. Applications include framing, Sheathing, Siding, fencing, Trusses, decks, bridging, pallets/crating, and wood to masonry. Accepts 2" To 3-1/2" 15 deg Coil framing nails. 1050 in/lb. (Inches per pound) driving power. 70 to 120 PSI (pounds per square inch) operating pressure. Lightweight magnesium design for added durability. This product is manufactured in Taiwan. This product meets customer requirement.

The Bostitch pneumatic coil framing nailer is designed to be impressively rugged and powerful. Its sturdy nature is disguised by a lightweight magnesium housing that's easy to hold and capable of surviving some serious abuse on the job site. This hardy model even has aggressive wear guards that help protect it from damage when you use it on abrasive surfaces.

The N89C-1 has a patented push-button adjustable depth guide to set nails at precisely the desired depths, quickly and conveniently, with minimal downtime between jobs. It also features an adjustable exhaust to direct cast-off air away from your face and your workpiece, for a clearer view of your project.

This model has a driving power of 1,050 in./lbs., and it accepts 15-degree coil framing fasteners from 2 inches to 3-1/2 inches (.099 - .148-inch shank). It operates at 70-120 psi, with a 1/4-inch NPT thread fitting. The N89C-1 has a magazine that holds up to 300 nails. -- Cherie Priest

Applications

Use the N89C-1 for almost any fastening application on the job site or home improvement project. It's perfect for framing, sheathing, siding, fencing, trusses, decks, bridging, pallets and crating, wood, or masonry.

What's in the box

Stanley Bostitch pneumatic coil framing nailer.

Choosing a Pneumatic Nailer

For small household jobs, an old-fashioned hammer is the perfect stand-by. But if you've got a bigger project on your to-do list, then a pneumatic power nailer could be your new best friend. Pneumatic nailers are a great alternative to traditionally powered nailers, because they're capable of providing more power -- and they operate with fewer moving parts, so a pneumatic nailer can take more abuse than its corded or battery-run cousins.

A Word on Air Compressors

All pneumatic tools require a steady supply of controlled, compressed air in order to work properly, and nailers are no exception. Bigger compressors with hardy motors and large tanks generate higher PSI levels and maintain them longer, so you'll probably want a piston-type, two-stage compressor to power your nailer. Smaller or single-stage models are fine for little projects, but if you need a pneumatic nailer, the odds are good that you're looking for some intense PSI and CFM ratings. Sometimes, a pneumatic nailer will come with its own compressor -- or it can be purchased as part of an air tool set.

How Pneumatic Nailers Work

Pneumatic nailers use compressed air power to cock and release the hammer. In order to fire a fastener, a valve opens to let air fill a cylinder -- which has a piston that's driven down hard and fast. This forces the nail out of the gun and into your workpiece. Then the piston recoils, and another nail is loaded.

Important Points to Consider

Check manufacturer's guidelines to find out what pressure (PSI) and volume (CFM) of air will give your pneumatic nailer the best results. Also, keep in mind that any restrictions on the air hose will diminish the tool's performance. Hoses that are very long, contain too much moisture, or are incorrectly sized will reduce air flow. This can prematurely wear out your tool and cause it to perform poorly.

General Features

Most models will feature a rubber nosepiece to prevent scuffing and marring of your workpieces, plus an exhaust system (rear or adjustable) to keep sawdust and debris out of your face and away from your project. Pneumatic nailers usually have an adjustable depth of drive, and depending on the model, they can accommodate nails up to 2-1/2 inches long, in a variety of different gauge sizes. With a powerful enough compressor behind them, they can shoot thousands of nails a day.

• Pneumatic coil framing nailer with an adjustable exhaust
• Patented push button adjustable depth guide sets nails to desired depths quickly and easily
• Lightweight magnesium design; aggressive wear guards to protect the tool from damage on abrasive surfaces
• Magazine holds up to 300 nails
• 12 1/4 inches long, 14 inches high; weighs 8.1 pounds; 7 year limited warranty

User questions & answers

Question:	what is the difference between his one and the $519 one. they have the same n89c-1 number
Answer:	MADE IN CHINA I just bought these because I thought they were not made in China. They are made in China not Germany.
Question:	I am building a fence and Need to drive galvanized 13 gauge 2-2.5 inch nails into cedar pickets, will nailer work? Thank you
Answer:	No they are not adjustable. These were bought for my wife and they just fit her and I would say she has an average head.
Question:	Does anyone know if I can use this gun for lap siding? Blind nailing
Answer:	The tactical sports cost me $150 when I got and after 2 years stopped working. Peltor wanted over $100 to fix them. These cost less and still work after 2 years.
Question:	what compressor to buy for this tool? please advice (for framing
Answer:	I just did my first range shooting today. I was able to borrow a pair of these cups. I wear glasses. I had absolutely NO problems with the seal letting in extraneous noise. Even with 30dB of reduction, the noise is still quite loud, but not enough that your ears will be damaged, or even be ringing, when your shooting day ends. I just put in my order for a pair of them. Highly recommended!

Product description

Bostitch, paper tape framing nailer, doubles as a metal connector nailer, drives most 33 degree paper tape collated framing nails from 1-1/2" to 3-1/2", same type of framing nails that senco & paslode framing nailers use, comes with bostitch smart trigger, delivers 1050 in lbs. of power.

Framing, siding, decking, installing metal connectors, attaching wood to masonry, driving big nails into hard engineered lumber--you name it--this versatile and lightweight framing nailer from Bostitch does it all. Two nailers in one, this framing gun includes two quick-change nosepieces to convert the tool for either framing or metal connector applications. A factory installed sequential trigger and Bostitch’s exclusive Smart Trigger ensure optimal control and faster production.

Operating in either bump- or sequential-fire modes, the tool’s lightweight magnesium housing means easy handling and unsurpassed durability. Weighing just 7.9 pounds, the tool handles great in tight quarters like attics and during otherwise shoulder-burning overhead tasks. The innovative design is also a godsend when nailing top plates to floor joints or when crawling under that low deck to reinforce the new hot-tub. A patented push-button, depth-of-drive control of course means there’s no adjusting compressor pressure, but also that you don’t have to fumble for tools or awkward switches when you’re standing on a steep roof. Just set the compressor at 80 psi and adjust the depth as needed.

The unit drives 1-1/2-inch STRAPSHOT fasteners as well as all 1-1/2- and 3-1/2-inch metal connector nails measuring .131 to .162 inches in diameter. An interchangeable tip helps place nails accurately for metal connector applications. One of the most powerful framers in its class, this nailer offers 1,050 in./lbs. of driving power.

For less downtime and more productivity, a notched, 16-inch layout indicator on the magazine helps achieve correct distance between studs in a matter of seconds. And, bolt-on, steel wear guards with integrated rubber skid pads protect the tool from bumps and drops for unsurpassed durability and years of use. --Brian D. Olson

What’s in the Box

Nailer, interchangeable tip

From the Manufacturer

The BOSTITCH F33PT is a 33-degree paper tape framing nailer that converts into a metal connector nailer in just seconds! This extraordinary design drives framing nails between 2 inches and 3-1/2 inches in length (.113-.162). The tool includes an interchangeable tip for driving metal connector nails (1-1/2 to 2-1/2 inches long) precisely into hardware such as hurricane ties and joist hangers. You get the benefit of two tools in one, no other competitive framer can match these features. The F33PT provides a lightweight, magnesium housing (weighing only 7.9 pounds) and touts 1050 in./lbs. of driving power to tackle even the toughest engineered lumber applications. Its adjustable push-button depth guide sets to desired depths conveniently. Additionally, the F33PT features a unique 16-inch layout indicator for achieving the correct distance between studs in a matter of seconds without the interruption a tape measure. Rest assured that this tool does it all.

• Drives most 33 degree paper tape collated framing nails from 1-1/2 inch to 3-1/2 inch
• Paper tape framing nailer
• Doubles as a metal connector nailer
• Drives 2- to 3-1/2-inch paper tape collated framing nails and 1-1/2- to 3-1/2-inch paper tape metal connector nails
• Metal connector capability includes interchangeable tip for use on joist hangers, hurricane straps, etc
• 1050-inches-per-pound of driving power for tough engineered lumber applications
• Includes 2 quick change nosepieces to convert tool to either framing or metal connector applications
• Lightweight magnesium design for added durability

User questions & answers

Question:	do they make a case for the framing nailer
Answer:	it's a strong nailer, in that it drive a nail into most anything, it holds a lot of nails, but you have no control at the gun over thedepth of the nail.Its a "good" nailer , but there are better
Question:	Does it work with Hitachi 1 1/2" nails
Answer:	My guess is no. the nails are to short for the holding area, plus the heads on the roof nails are to large for the track.the power of the n80 would blow the nail through the material. A roof gun has much less power.
Question:	From the listing: "This extraordinary design drives framing nails between 2 inches and 3-1/2 inches in length (.113-.162)."? Is this right
Answer:	I don't know but I do know they are worth the money!!!! My computer makes a "high" pitch sound that drives me crazy and these headphones block that sound!!! Love them!
Question:	Does this tool accommodate a161.x 3 1/2 nail
Answer:	I'm sure the muffs will reduce or muffle the sound. I purchased them to use at the firing range. The noise is not completely blocked but the muffs sure help.

Product description

Go 100% battery powered with this Cordless Framing Nailer. It drives framing nails up to 3-1/2 in., features a 2-speed motor, and has tool-free depth adjustment and selector to quickly change between sequential and bump-fire modes. It accepts full round offset nails in 28-degree wire weld collation, and also comes with a rafter hook. Pneumatic nailer users can save up to 20 minutes daily in set-up and clean-up time by switching to a Bostitch battery-powered nailer. Frequent gas nailer users could save up to $15 per week in fuel cells and cleaning and lubricating costs by switching to a Bostitch battery-powered nailer. Tool-free selector switch for sequential and contact-actuation modes (for accurate fastener placement and faster application speed, respectively) Brushless motor and engine design includes two speeds for optimized performance and enough power to drive 3-1/2 in. fasteners Includes: 20V MAX Lithium-Ion 28-Degree Wire Weld Framing Nailer,20V MAX 4.0 Ah High Capacity Lithium-Ion Battery - BCF204,Charger - BCB115,Kit Bag.

• This Certified Refurbished product has been tested and certified to work and look like new, with minimal to no signs of wear, by a specialized third-party seller approved by Amazon. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer.
• Stall release lever to reset driver blade in case of jam

Product description

Sfr2190 features: -Framing nailer. -360° adjustable exhaust. -Finger depth adjustment. -Ergonomically designed comfort grip. Type of nailer: -Framing nailers. Type of fastener: -Framing nails. Generic dimensions: -20.75'' h x 15'' w x 5.75'' d. Dimensions: Overall height - top to bottom: -20.75 inches. Overall width - side to side: -15 inches. Overall product weight: -8.5 pounds.

• Nailed It: This 21 degree pneumatic framing nailer features a lightweight and durable magnesium body, ergonomic secure handle, and interchangeable trigger for quick fire or single shot function. It's ideal for professional construction contractors and home DIY projects.
• Versatile and Powerful: The framing nailer features depth adjustment and a no mar tip, making it adaptable for different working surfaces. It's perfect for framing, and it can also be used to install subfloors, roof decking, wood fencing, and sheathing.Minimum Recommended Air Delivery SCFM @ 90PSI:2.4
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	will it take any brand of nails
Answer:	I have used two different brands so far. As long as the nails are plastic coated, 21 degree I believe any brand would work. The best prices I have found on nails is at harbor freight. 2500 nails for around $28. I have used 2 1/2" and 3 1/2"
Question:	How come just below the nailer specs they say "often bought with this product"....22 degree nails....not
Answer:	I used some of the 22 degree without a problem. I've used Bostich guns for 30 years prior to this gun & this is as good as any I've used.t's a great nailer
Question:	do the nails have to be plastic coated
Answer:	Plastic coated? No. But I do believe they have to be Plastic Collated, that is, they need to be bound together with plastic. I'm not sure if paper collated nails will work.
Question:	What kind of air compressor do you recommend for this nailer
Answer:	It really depends on how you're using it. If you're intermittently nailing with in and not imitating a machine gun- you can use a pancake or similar small compressor. The working pressure of the nailer is 70-115 PSI. I run mine at 100 PSI. Any portable compressor should be able to hit that pressure. The real question is duty cycle. If you're nailing every few seconds then you'll need a compressor capable of keeping up with the volume of air being consumed OR you'll have to slow down until your compressor stops running before firing the next nail. I run mine on 2 different compressors and don't have any issues- one is a 40 gallon shop compressor- the CFM is infinite compared to the gun. The other compressor is 2.6 CFM. I don't rapid fire when I'm using it and I can fire several nails before the compressor has to cycle. As long as you're not continuing to fire when the compressor is running you should be OK.

Product features

Numax 21º Full Head Framing Nailer

It's time to tackle a new project - and we have just the tool to get it done. The SFR2190 is perfect for framing, but did you know you can also use a framing nailer to install sub-floors, roof decking, wood fencing, sheathing, and more? We designed this nailer with you in mind, so it has all of the premium features you need to get started.

Step 1: Choose Firing Mode

Your framing nailer comes with a black single-fire trigger already assembled. This is the best choice if you haven't used a framing nailer before, or if you want accurate nail placement.

Follow the manual instructions to install the red bump-fire trigger if you want quick successive firing.

Step 2: Connect to Compressor

Set your compressor to 70 PSI and use the quick-connect fitting on your air hose to connect your framing nailer. If you have a really dense material, you can increase the pressure up to 115 PSI.

Put a few drops of oil into the fitting before connecting to a compressor to keep things running smoothly!

Step 3: Load Nails

Pull the side lever back along the magazine until it snaps into place.

Drop the nails into the open channel on the top of the magazine. The angle of the nails should match the angle of the nose of the nailer.

Lift the lever at the back of the magazine to release the side lever and secure the nails.

Step 4: Adjust and Go!

This nailer is loaded with features that let you customize for any project. Change the depth adjust, 360º air exhaust, or remove the no-mar tip for extra holding power.

Pro Tip: Use piece of scrap material to test out your nailer before starting on the real thing!

21º Plastic Collated Full-Head Framing Nails

A 'plastic collated nail' just means that the nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the SFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

Product description

The BOSTITCH BCF28WWM1 20V MAX 28 Degree Wire Weld Cordless Framing Nailer Kit allows you to go cordless with this 100% battery powered framing nailer. This cordless framing nailer drives framing nails up to 3-1/2 in., features a 2-speed motor, and has tool-free depth adjustment and selector to quickly change between sequential and bump-fire modes. It accepts full round offset nails in 28-degree wire weld collation, and also comes with a rafter hook. It also has a stall release lever to reset the driver blade in case of a jam. Pneumatic nailer users can save up to 20 minutes daily in set-up and clean-up time by switching to a BOSTITCH battery-powered nailer. **Frequent gas nailer users could save up to $15 per week in fuel cells and cleaning and lubricating costs by switching to a BOSTITCH battery-powered nailer. Backed by a BOSTITCH 3 year limited warranty. Includes: BCF28WW Wire Weld Framing Nailer, BCF204 20V MAX* High Capacity Li-Ion Battery (4.0Ah), BCB115 Charger, Kit Bag.

• NO COMPRESSOR NEEDED: Save time and money by going cordless
• OPTIMIZATION AND POWER: Brushless motor and engine design includes two speeds for optimized performance and enough power to drive 3-1/2" fasteners
• NAIL SIZE:Accepts full round offset nails in 28-degree wire weld collation
• STALL RELEASE LEVER: Stall release lever to reset driver blade in case of jam
• WARRANTY: 3 year limited warranty

User questions & answers

Question:	Is there an advantage with this nailer over the bostitch cordless nailer that takes the paper tape nails? I am trying to decide which one to buy
Answer:	I have been very happy with mine. Used to put true 2 inch oak planks down on a barn floor. Nails are pricey but worked way better then trying to fasten them with screws..
Question:	Will this work with full round nails
Answer:	We used it to shoot 51/4 inch nails with no problem at all. Great tool
Question:	Any chance dewalt 20v batteries fit this gun
Answer:	If you look near the tip, where the next nail is waiting to be fired, there is only room for a 3 1/4" nail at best. Mine is loaded with 3" now and there's about 3/8" gap below that. You might be able to fit 3 1/2" nails if you machined off some material. But at that point just get a gun that will accommodate longer nails.
Question:	Will this drive a nail thru 3/8" thick lp smart siding. (hardboard siding)? how many amp hour battery and how long it last? thanks
Answer:	No, this is a framing nailer

Product description

Powerful enough to drive into engineered lumber. Tool free features depth of drive adjustment, selectable trigger for single drive or multi drive actuation mode, adjustable rafter hook. Magazine capacity: 75. Fastener length range: 2 inch to 3-1/4". length: 19.7 inch x 12.75 inch height. Operating pressure: 70-120. Air inlet size: .25". weighs only 8.1 lbs.

• Includes By-Pass Float Switch For Automatic Or Manual Operation
• Powerful Motor With Automatic Thermal Overload Protection
• Easy Installation - Replaces Pedestal Or Submersible Sump Pumps
• Brand Name: Stanley Bostitch

User questions & answers

Question:	Is this low profile and ligth weigth
Answer:	подойлет любой главноепоставить фильтрдлч сбора влаги с полаваемого воздухаибо пистолет начнет ржаветьи ему приснится трындец
Question:	Whats the angle
Answer:	We use a 3/8" fitting. The air nailer did not come with a fitting.

Product description

Adjustable depth guide sets nails to desired depths. Lightweight magnesium housing design for durability. Soft rubber foot prevents damage. Tool-free adjustable exhaust conveniently directs exhaust away from the user. Specs: Tool Weight: 4.7 lb; Height : 14.96"; Air Inlet Size: .25"; Operating Pressure: 70-120 PSI: Fastener Specifications: 15 Degree Wire Weld & Plastic Inserted Coil Siding Nails (1 1/4" - 2 1/2").

Nail down siding in no time with the powerful, precise Bostitch N66C-1 Coil Siding Nailer. This lightweight tool features a aluminum housing that makes it durable enough to repeatedly withstand the rigors of all-day use. And with adjustable nail depth and a soft rubber foot, you can work with a range of siding materials, including soft woods. The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you're working.

Works with a Variety of Siding Materials, from Soft Wood to Steel

Pretty much no matter what type of siding you're working with, the N66C-1 will take care of the job. This nailer accepts both wire-weld and plastic-inserted coil nails and includes a soft rubber foot that's perfect for working with soft wood. Additionally, the N66C-1 can handle the tough stuff: cement, clapboard, fencing, and even light-gauge steel are no problem.

The N66C-1 has an adjustable guide and an operating range of 70 to 120 PSI, which means you can dial in the right depth for the job. And with driving power of 515 in/lbs, the N66C-1 can be easily set for 1-1/4-inch to 2-1/2- inch nails. Additionally, the N66C-1 has a 350-nail magazine, so you can knock out plenty of work in a single load.

The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you're working.

Lightweight, Durable Construction for Everyday Use

Finish the job without breaking a sweat. The N66C-1 Siding Nailer is constructed with aluminum, which means it is light enough to wield all day. Measuring just 3.25 x 12 x 11.25 inches (WxHxL) and weighing just 4.9 pounds, this nailer is still durable enough to withstand the wear and tear of any jobsite.

The Bostitch N66C-1 Coil Siding Nailer is covered by a seven-year limited warranty.

About Bostitch

Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box

Siding nailer

• Drives wire weld and plastic inserted coil nails. Magazine Capacity : 300
• Adjustable depth guide sets nails to desired depths quickly and conveniently
• Lightweight aluminum design for added durability. Fastener Diameter .080 .092 Inch
• Soft rubber foot prevents damage to softer woods
• Tool free adjustable exhaust conveniently directs exhaust away from the user
• Ensure using compatible nails to prevent misfires/ensure proper operation.
• NOTE : No carry case is included.

User questions & answers

Question:	Can this gun be used to install azek trim boards
Answer:	No, with standard framing contact arm installed: Uses a 30° paper collated stick nails, in lengths of 2” to 3-1/2” (50-90mm) and shank diameters of .113” to .131” (2.8 - 3.3mm). With metal connector attachment installed: Uses a 30° - 35° paper collated full round head metal connector nails, in lengths of 1-1/2” and 2-1/2” (38 - 64mm) and shank diameters of .131”, .148” and .162”.
Question:	Would this nailer be good for nailing fascia, soffit and exterior trim
Answer:	The only difference I see is about 270$ in price.😊All joking aside, this nailer is a beast. If you go with it I don’t think you will be disappointed.
Question:	can you use this gun on hardie board
Answer:	Yes, this gun will shoot up to a 3 1/4" nails. You will be very pleased with what this gun will handle. Hope it was helpful?
Question:	Will this work on James Hardie trim boards
Answer:	Adjustable depths.."" air..""length of nails.. go for it. If you break through the face back it off a bit and go. Nothing worse than a gun with too little punch. I'd use a smaller head for the trim though..6 penny

Product features

BOSTITCH N66C-1

Features:

• Drives wire weld and plastic inserted coil nails
• Adjustable depth guide sets nails to desired depths quickly and conveniently
• Lightweight aluminum design for durability
• Soft rubber foot helps to prevent damage to softer woods
• Adjustable exhaust conveniently directs exhaust away

Product description

No nailer does everything, but the Bostitch RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer comes close. Stop at any construction site and watchas the roofers fly through their job with ease. Chances are, they are using the no. 1 roofing nailer in the business--the RN46-1. This little tank is built to last even under extreme job conditions. Bostitch makes sure by dragging it 75-miles across asphalt shingles in its testing labs. Constructed of tough but light magnesium, the RN46-1 weighs only 4.8-pounds and delivers 410-inch-pounds of torque, and it comes with unique features like a single-action side-load canister that is quick and easy to load; a dry-fire lockout so it won't fire when it runs out of nails; carbide inserts wherever it might contact a work surface; skid-resistant pads; a tool-less shingle guide; and an adjustable-depth dial and an over-molded rubber grip.

• 3/4-inch to 1-3/4-inch coil roofing nailer with lockout mechanism prevents firing when empty. Operating Pressure : 70 -120 psi
• Adjustable depth control, full round driver, body and magazine wear guards, side-load canister
• Durable yet lightweight aluminum and carbide tips for long life. Magazine Angle - 15 Degree
• Patented single-action side load canister for fast, one-step nail loading. Adjustable shingle guide for quick shingle spacing
• Backed by seven-year limited warranty

User questions & answers

Question:	Will this coil nailer shoot nails with a 3/8" head
Answer:	Yes, the RN46-1 will shoot roofing nails with a 3/8" head...I think all standard roofing nails have a 3/8" head so any of them from 3/4" to 1 3/4" length should work fine... kd
Question:	can this gun be used to nail hardie siding
Answer:	I wouldn't. This gun can only shoot up to 1 3/4" roofing nails. If it were me, I'd get a siding gun and shoot some longer ring shank nails
Question:	Is this new gun
Answer:	Yes
Question:	Does it come with any type of warranty besides the one that is being offered
Answer:	I would check with the seller you plan to purchase from. It varies, depending on the seller. Some may offer 30-day warranties and others may only pass along manufacturer's warranty information.

Product features

BOSTITCH RN46-1 Coil Roofing Nailer

Lightweight and durable, the Bostitch RN46-1 Coil Roofing Nailer is an ideal tool for roofing, exterior drywall, insulation board, and fiber cement applications. With a patented side-loading canister, zero nail lock-out, easy depth of drive adjustments, and aggressive performance, the RN46-1 is a must-have tool for professional construction workers, builders, roofers, and anyone looking for long-lasting performance from a coil nailer.

Powerful and Accurate Nail Delivery

Amazingly powerful, the RN46-1 is capable of delivering 410 in./lbs. of force at 100 psi. The RN46-1 offers contact trip firing, with the ability to drive up to 100 nails per minute. Contact trip uses a bouncing motion along the workpiece and is great for working on large areas, such as roofs. For shingle work, the RN46-1 features an integrated, tool-less gauge used to control shingle spacing.

Get the Right Depth for the Job

The RN46-1 allows for fast, tool-free depth-of-drive adjustments with its integrated depth dial. The dial has five different settings for finding the perfect driving depth for the job, including flush mount driving, shallow driving, and countersinking.