9 best senco air nailers

Product description

Everything you need to start your finish and trim project. 1 Gallon PC1010N compressor, 2 in. FinishPro 18 ga. brad nailer, coil hose, air fittings, safety glasses and fasteners in one kit. 1/2 HP 1 gal Hand Carry Air Compressor - PC1010 - 4 Amps at 115V, 120 PSI Max Output Ultra quiet motor at 68 dBA Oil-free pump 1/4 in. Quick disconnect coupler and regulator Integrated control panel with gauges Lightweight - 20 lbs. Includes: FinishPro18MG 18-Gauge 2-1/8 in. Finish Nailer - 1U0021N,1/2 HP 1 gal Hand Carry Air Compressor - PC1010,Air Hose,Tool Oil,Air Fittings,Safety Glasses,Variety Pack of 18-Gauge Nails.

• FinishPro18MG 18-Gauge 2-1/8 in. Finish Nailer - 1U0021N - Lightweight aluminum main body
• Tool free depth-of-drive control
• Adjustable exhaust
• Reversible belt hook
• No-mar pad to protect work surfaces

User questions & answers

Question:	Does the Brad nailer have a built in hook
Answer:	The 1s (C4 version) is rated at "up to 300 lumens" while the 1H is rated to "bursts of up to 630 lumens". Have not measured with instruments but I think it is 300. Like the light and it works well for me.
Question:	What’s the DB noise rating for the compressor? I have a small craftsman similar to this and it’s crazy loud
Answer:	Not sure, but you know that light on your cell phone? It's a bit less than that bright with a yellow hue...
Question:	What gauge micro pins are used in this
Answer:	There’s a switch on the bottom of the lights that permits you to turn on and off as you please.
Question:	I see this listed as including the finishpro23sxp nailer in 2 places in this listing but it also lists a fip18. please advise which nail gun it is
Answer:	I did this also - I'm a "fix it when I see it with whatever I can find nearby" kind of guy. I just used a stick that would fit inside the tube. Forced the stick into the ground then slide the light's tube over it. You can use just about anything - handful of bamboo kebab skewers, garden stakes, or that infamous stick you keep moving out of the way of your lawn mower every time you mow, but somehow always returns.

Product description

Coil Siding nailer is well-balanced and powerful. All day durability and dependability are designed in. Powered fastening solution for the installation of Siding, including fiber cement products from hardy and certainteed. Drives smooth, ring, and screw shank Coil nails in both wire and plastic sheet Collation. Nail finish: bright Basic, galvanized and stainless. Features a contact or sequential actuation selectable trigger, clear magazine door, and adjustable depth of drive control.

• Package Dimensions :34.798 Cm L X34.29 Cm W X14.478 Cm H
• Product Type :Tools
• Country Of Origin :China
• Package Weight :7.0Lbs
• Selectable Trigger Makes It Easy To Switch Between Contact Or Sequential Firing Modes

Product description

Fip18mg's magnesium body delivers an ultra light tool with Senco dependability and the power to drive up to 2 1/8" Brads.

• This product is easy to use
• This product is highly durable
• This product is manufactured in China
• Ultra-Light & Durable
• Oil-Free Design
• Selective Trigger
• Adjustable Depth-of-Drive
• Rear exhaust

User questions & answers

Question:	what size nails will it shoot
Answer:	Currently, we do not ship to Australia.
Question:	Does it come with a box for transporting
Answer:	This tool is considered a brad nailer
Question:	can you post to Perth Australia
Answer:	Yes
Question:	Is this considered a "finish nailer" or a "brad nailer
Answer:	Not sure but would like to know myself. "Where does it say (to) 2 pack" someone says... On the green round head portion of the tool (Main Photo)!

Product description

Finish Pro 18 combo kit, perfect for woodworkers & punch list contractor, kit includes: lightweight oil less, 1HP compressor, finish Pro 18 gauge straight brad nailer 5/8" To 2", hose, fittings, sample pack of brads, safety glasses & bottle of oil.

To save you both time and money, the Senco PC0947 Finishing Combo Kit contains everything you need for finish and trim jobs. The FinishPro 18-Gauge Brad Nailer is a versatile nailer for all your finish needs, and the Senco PC1010 is a 1.0 HP peak, one gallon, oil-less portable air compressor that's easy to carry and use in a wide variety of applications.

The PC0947 Finishing Combo Kit At a Glance: Kit contains everything you need for finishing jobs FinishPro 18 Nailer drives 18-gauge brad nails from 5/8" to 2" PC1010--a lightweight, oil-less compressor with one-gallon capacity tank All necessary air fittings included Both tools back by one-year warranty

The PC0947 has all the features you need for your finish jobs. View larger.

Thanks to the rugged, compact compressor, you'll get professional quality on the go. View larger.

Fast, Powerful Nailer

With an operating pressure of 70 to 95 psi, the FinishPro 18 drives 18-gauge brad nails from 5/8 inch to 2 inches. It's ideal for a range of installation jobs, including interior trim, cabinets, chair rail, crown molding, baseboards, bookshelves, and exterior trim.

Designed to be user-friendly, this nailer features an adjustable depth-of-drive and exhaust, as well as a belt hook that lets you take the tool everywhere you go. The soft grip provides comfort and control, a no-mar pad protects the work surface, and a rear bumper protects work finish.

Rugged and Compact Compressor

Powered by a 1.0 HP (peak), 0.5 HP (running) oil-less motor, the PC1010 compressor has a one-gallon capacity tank. It provides 4.0 amps at 115 volts and 120 psi max output. The 1/4-inch quick disconnect coupler and regulator provides consistent, reliable operation, while individual gauges for tank and regulated output allow you to easily keep track of pressure. And because the PC1010 is electric, you won't have to worry about the expense and mess of oil.

Designed to be rugged enough for professional use, the PC1010 is lightweight at 20 pounds, and it features a cushioned handle for easy carrying and a compact, easy-store design. And to save you time, it pumps up in just over two minutes and recovers in only 35 seconds.

Both tools are backed by one-year warranty.

About Senco: Innovation Backed by Experience

For over 50 years, Senco has been setting quality and performance standards for the fastener industry. In fact, Senco was the true inventor of the pneumatic fastening industry way back in 1950, and they've been the leading innovator in fastener technologies ever since. As a company, Senco has achieved an unheard of ten thousand hours of fastener engineering expertise.

In just one year, their plant in Cincinnati alone uses enough wire to make 18 trips to the moon and back. Even more impressive is the fact that since 1996, Senco has sold over 500 trillion fasteners to trusted companies like Fleetwood, Champion, Merillat, Ashley Furniture, and other major manufacturers.

What's in the Box

FinishPro 18-gauge brad nailer; PC1010 one-gallon electric oil-less compressor; 1/4-inch x 25-foot coil hose; tool oil; all necessary air fittings; safety glasses; manuals; and variety pack of 18-gauge brad nails.

• Finish Pro 18 combo kit
• This product is highly durable
• This product is manufactured in China
• 18-gauge brad nailer and 1-gallon compressor combo kit
• Nailer: adjustable depth of drive, rear exhaust, easy-open latch, no-mar pad, low-load-indicator
• Compressor: 1 gallon; aluminum cylinder with steel sleeve; 20-pounds
• Includes nailer, 1/4-inch -by-25-foot hose, safety glasses, fittings, oil, 1,200 brad nails, wrenches, and manuals
• 1-year warranty on nailer; 90-day warranty on compressor

User questions & answers

Question:	How often does the unit kick on and off while working
Answer:	You can wash the whiskey stones in the dishwasher and store them in the pouch.
Question:	Does this kit come with a case for the nailer
Answer:	Premium pine gift box, natural granite stones, velvet pouch, stainless steel tongs and wine stopper, a great choice for giving gift.
Question:	Can i use a heavy duty extension cord with the compressor
Answer:	9 granite stones, 1 storage pouch, 1 ice tongs and 1 wine stopper in a handmade wooden box.
Question:	The desrciption of this states, an aluminum cylinder with a steel sleeve, doesn't say this on any other literature, does anyone know if this is true
Answer:	Whiskey Box Length 7'', width 4.6'', Whiskey stones 0.78'' cube, the best choice for giving gift.

Product description

The PC0350 Nail Gun Belt Hook Tool Holder for 1/4" Fittings by Senco fits pneumatic tools with a 1/4" fitting and allows you to free up your hands by hooking the nail gun up to your tool belt.

• Fits pneumatic tools with a 1/4" fitting
• Allows you to free up your hands and hook the nail gun up to your tool belt
• Durable steel design is rigid and lightweight
• Installs in seconds

Product description

Nosepiece probe locates metal connector holes providing accurate nail placement. Lightweight and well balanced. Dry-fire lockout. Powerful enough to drive through engineered lumber. Adjustable rafter hanger. Fastener capacity: 30, Shanks: .131"-.148", Range: 1-1/2", Collation: 34 degree paper tape strip. Tool-free adjustable exhaust deflector.

• Patent pending nosepiece design - leads with nail tip for accurate placement
• Powerful enough to drive through engineered lumber
• Lightweight and well-balanced
• Full round head

User questions & answers

Question:	Does this gun shoot 33 degree paper collated nails
Answer:	Plain Stainless Steel... Visual verification and verification on the box- Front, rear and bottom.
Question:	will hitachi nails fit this gun
Answer:	approximately 1 1/2 inch cube
Question:	Is it really 9.8 pounds? That's twice as much as comparable nailers
Answer:	I actually tried these in my whisky and I was disappointed because they do not stay cold for long and they also turned color after a week of using them, so I wouldn't purchase these if I were you. That's just my experience I had with them, but maybe you will have a better experience. They do not change the taste of the drink, but they do not stay that cold for long. I hope this helped you.
Question:	Does it come with a case
Answer:	Hi Craig, thank you for your question. We are sending it one day after the delivery. :) Have a great day Joey
Question:	Does it come with a case
Answer:	Its doesn't keep drinks cold really. Gives a little chill. But more decorative

Product description

Value not found

Designed with the professional in mind, the 702XP is packing 904 inch/pounds of power in a maneuverable, comfortable nailer. The anodized sleeve offers additional strength and durability and the urethane sleeve cap protects the sleeve from wear. The magazine load is smooth; the comfort grip feels great in hand. Just a twist adjusts the exhaust a full 360 degrees. The 20-degree magazine offers unobstructed line-of-sight; drive depth adjusts with a well-placed thumbwheel. As with most quality nailers, you can choose between dual action or restrictive trigger firing mechanisms. A great combination for the exacting professional, perfect for framing, decking, sheathing, siding, subfloors and trusses.--Kris Jensen-Van Heste

From the Manufacturer

The FramePro 702XP Full Round Head nailer is designed with the Pro in mind. XtremePro models have improved internal and external features for improved durability and comfort, and more than enough power to drive the wide range of full round head nails and common nails.

• Drives 2- to 3-1/2-Inch smooth shank nails and 2- to 3-Inch ring shank nails; shank diameters include 0.113, 0.120, 0.131, and 0.148.
• Upgraded XtremePro internal features include anodized sleeve for additional strength and durability, urethane sleeve cap protects sleeve from wear, and fixed firing valve to improve tool life and speed
• 20-Degree in-line magazine provides excellent maneuverability and line of sight
• On-tool stowable rafter hanger
• Thumbwheel depth-of-drive control and EZ-Clear

User questions & answers

Question:	will this product shoot 21 degree plastic collated nails
Answer:	It"s a pneumatic tool runs on compressed air.
Question:	any repair parts
Answer:	It does have a variable speed adjustment.
Question:	where is this gun made
Answer:	I use 05771 Soft Interface Pad for the 3in.

Product description

Includes FinishPro 18BMg 18-Gauge 2-1/8 in. Magnesium Brad Nailer - 9B0001N, Wrenches, No-Mar Pad, Case, Plug

• Metal Cylinder for increased durability
• EZ-Clear Latch virtually eliminates downtime caused by fastener jams
• Narrow nose for tight corners
• Nose mounted LED light illuminates dark work spaces

User questions & answers

Question:	is this brad nailer oiless
Answer:	The anchor is nylon, the screw is zinc plated. We will update the description to be more accurate. Thank you for pointing it out.

Product description

The Senco 15-Gauge Angled Finish Nailer has established itself as a marquee tool for the professional finish carpenter. This tool offers superb durability and superior performance, great for a wide variety of finish and trim applications. Featuring a comfort grip for easy handling, the nailer is crafted with a rugged internal design along with magnesium to make it lightweight yet tough.

Designed for the unique demands of dedicated professional use, the Senco FinishPro 42XP 1-1/4-Inch to 2-1/2-Inch 15-Gauge Finish Nailer is packed with the powerful, innovative features you need to tackle virtually any job. It features a balanced, ergonomic design and lightweight construction that help minimize wrist and arm fatigue, so you can get more done in less time.

• Anti-lube design eliminates the hassle of maintenance
• Magnesium-coated design resists scratches
• Smooth finish makes it easy to paint
• Rugged internal engine offers lasting durability
• Great tool for professional finish carpenters

User questions & answers

Question:	Does this come with a case
Answer:	No. It uses a build-in battery.
Question:	Metal or plastic body housing
Answer:	Metal push button. Same as the flashlight body.
Question:	Will this dry fire
Answer:	Only at about 6-7 charges.......so I cannot help with this question Maybe someone will be able to answer your question that has had it long enough for 500 charges This is a Great little lite though in my opinion My other lites have to have the batteries removed and put in charger and back in at home,,,,,, where this light is more portable to charge. Thank You and have a great day
Question:	The listing for this gun shows both last year's model in gray, and the new red model. Which do you receive if you order now
Answer:	We aren't able to attach pictures, but there is a velcro strap on the back of the holster that will fit to most belts.