11 best pneumatic finish nailers

Pneumatic finish nailers are a type of power tool commonly used in construction, woodworking, and home improvement projects. They belong to the category of nailers and staplers and are known for their precision and efficiency. Here's what you need to know about pneumatic finish nailers:

  1. Operating Principle: Pneumatic finish nailers operate using compressed air as their power source. They rely on an attached air compressor to provide the necessary air pressure for driving nails into various materials.

  2. Nail Types: These nailers are designed for finish nails, which are typically smaller and have a smaller head compared to framing nails. Finish nails are used for tasks like trim work, crown molding, baseboards, and other finishing touches.

  3. Precision and Clean Finish: Pneumatic finish nailers are favored for their ability to provide precise and clean results. The small size of the finish nails reduces the risk of wood splitting and allows for a flush or near-flush finish with the surface.

  4. No Mar Tips: Many finish nailers come equipped with no-mar tips or rubberized bumpers to prevent damage to the work surface, ensuring that the finish remains smooth and unblemished.

  5. Adjustable Depth Settings: These nailers often have adjustable depth settings, allowing you to control how deep the nails are driven into the material. This feature is essential for achieving the desired finish and preventing over-driving or under-driving of nails.

  6. Various Angles: Finish nailers come in different angles, including 15-degree and 16-degree models. The choice of angle depends on the specific application and personal preference.

  7. Magazine Capacity: The nail magazine of a pneumatic finish nailer can typically hold a strip of finish nails, ranging from 15 to 100 nails, depending on the model. This means fewer reloads during work.

  8. Quick Operation: Pneumatic nailers offer rapid firing, making them efficient for large projects.Sequential and bump firing modes are common, allowing you to choose the firing method that suits your workflow.

  9. Maintenance: Regular maintenance is crucial to keep pneumatic finish nailers in good working condition. This includes oiling the tool to prevent internal corrosion and cleaning the nail magazine to ensure smooth nail feed.

  10. Safety: Safety features such as trigger locks and safety tips are essential to prevent accidental firing. Always follow safety guidelines and wear appropriate protective gear when using pneumatic finish nailers.

  11. Air Compressor Compatibility: To use a pneumatic finish nailer, you'll need an air compressor capable of providing the required air pressure. Ensure that your compressor is compatible with the nailer's air pressure specifications.

In summary, pneumatic finish nailers are valuable tools for achieving professional-quality finishes in woodworking and construction projects. Their precision, speed, and versatility make them a popular choice among carpenters, contractors, and DIY enthusiasts for a wide range of finishing tasks.

Below you can find our editor's choice of the best pneumatic finish nailers on the market
  

NuMax SFN64 Pneumatic 16-Gauge 2-1/2" Straight Finish Nailer Ergonomic and Lightweight Nail Gun with Tool-Free Depth Adjust and No Mar Tip

NuMax

Based on 1 reviews Check latest price

Product description

The NuMax SFN64 Pneumatic 16-Gauge 2-1/2" Straight Finish Nailer is ideal for applications such as decorative trim, furniture trim, rail molding, crown molding, window casing, door installation, base boards, chair rails, picture frame assembly, and hobbies and crafts. Compatible with 16 gauge straight finish nails from 1" to 2-1/2", This air powered nail gun features a quick jam release for fast clearing in the event of a jammed fastener, along with a tool-free finger depth adjust for various applications. An ergonomically engineered die cast aluminum body makes this rugged and lightweight finish nailer easy to operate over extended periods of time. The comfort grip handle and No mar safety tip ensure great results by increasing precision and preventing damage to your working surface. A one piece drive blade of hardened steel adds to the durability of this nail gun. Air tool oil and adjustment tools are included. The Pneumatic 16-Gauge 2-1/2" Straight Finish Nailer is an essential tool for DIYers at home as well as professional contractors at the job site.

  • Nailed It: This pneumatic 16-gauge straight finish nailer features a lightweight and durable aluminum body, and an ergonomic comfort grip handle. A no mar tip prevents dents and dings, and the quick jam release lets you easily clear jams without taking the nailer apart.
  • Many Uses: This finish nail gun is great for interior and exterior finish and trim, furniture, cabinet work, staircases, base boards, shoe and crown moulding, window casing, and chair rail moulding. Sequential firing and tool-free depth adjust allow you to customize for any project.
  • The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
  • Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
  • Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question: Would this gun work for face nailing 3/4" Oak hardwood floors
Answer: There are 2 light kits that will match the oil rubbed bronze finish of your fan, however it may not be 100% match but it is the closest to it. The part numbers are ; 77850 & 77846. Unfortunately, it is not remote control adaptable.
Question: can you use 2" or 1-1/2" 16 gauge finish nails in addition to the
Answer: These are ABS resin blades (acrylonitrile butadiene styrene).
Question: Can you use 18 gauge nails
Answer: There are a number of down rods that can give different hang lengths
Question: Does this tool require an air compressor
Answer: Approximately 11” diameter

Product features

16 Gauge Straight Finish Nails

The SFN64 is designed to fire 16 gauge straight finish nails anywhere from 1" to 2.5". Just like the name suggests, straight finish nails are perfect for interior and exterior finish projects like trim, furniture, cabinet work, base boards, shoe and crown molding, window casing, chair rail molding, and more. The thin gauge and small head allows these nails to disappear into your woodwork, which means you spend less time filling in holes and sanding. Don't be fooled by their small size - finish nails are strong and these nailers are an essential part of any professional's tool box. Whatever your project is, we have the right size nail for you!

16 Gauge Straight Finish Nails

The SFN64 is designed to fire 16 gauge straight finish nails anywhere from 1" to 2.5". Just like the name suggests, straight finish nails are perfect for interior and exterior finish projects like trim, furniture, cabinet work, base boards, shoe and crown molding, window casing, chair rail molding, and more. The thin gauge and small head allows these nails to disappear into your woodwork, which means you spend less time filling in holes and sanding. Don't be fooled by their small size - finish nails are strong and these nailers are an essential part of any professional's tool box. Whatever your project is, we have the right size nail for you!

16 Gauge Straight Finish Nails

The SFN64 is designed to fire 16 gauge straight finish nails anywhere from 1" to 2.5". Just like the name suggests, straight finish nails are perfect for interior and exterior finish projects like trim, furniture, cabinet work, base boards, shoe and crown molding, window casing, chair rail molding, and more. The thin gauge and small head allows these nails to disappear into your woodwork, which means you spend less time filling in holes and sanding. Don't be fooled by their small size - finish nails are strong and these nailers are an essential part of any professional's tool box. Whatever your project is, we have the right size nail for you!

16 Gauge Straight Finish Nails

The SFN64 is designed to fire 16 gauge straight finish nails anywhere from 1" to 2.5". Just like the name suggests, straight finish nails are perfect for interior and exterior finish projects like trim, furniture, cabinet work, base boards, shoe and crown molding, window casing, chair rail molding, and more. The thin gauge and small head allows these nails to disappear into your woodwork, which means you spend less time filling in holes and sanding. Don't be fooled by their small size - finish nails are strong and these nailers are an essential part of any professional's tool box. Whatever your project is, we have the right size nail for you!

Paslode, Pneumatic Finish Nailer, 515500, 16 Gauge, Air Compressor Powered

Based on 62 reviews Check latest price

Product description

The Paslode 16-Gauge. Pneumatic Finish Nailer has a best in class design that allows for comfort in all applications. This is a reliable and durable tool you can trust to keep up with you. The oil-free design allows for long term, maintenance-free operation which reduces cleanup time and associated costs. Experience non-stop nailing with Paslode trim nails.

  • Powerful Precision - Nails with powerful precision for hardwoods, crown molding, and other finish applications.
  • Convenient Design - Flared out trigger allows for 2 finger placement to assist the index reach and handle can be fully gripped for improved comfort and balance.
  • Low Maintenance - Oil-free design allows for a long term maintenance-free operation which reduces cleanup time and associated costs.
  • Best In Class Ergonomics - Designed with enhanced features to optimize balance, maximize comfort, reduce fatigue and increase productivity.
  • Consistent Nailing - Each time the trigger is pulled, the nail drives flush into the trim.

User questions & answers

Question: Can this bump fire
Answer: Yes
Question: Do they sell just the drive pin replacement
Answer: I'm sure they do. Look it up with the model number added.
Question: I don't see what length of nails this gun can use. Anyone know
Answer: The nail range for this pneumatic finish nailer is 1" - 2-1/2".
Question: USA made
Answer: This tool is made in Taiwan.

NuMax SL31 Pneumatic 3-in-1 16-Gauge and 18-Gauge 2" Finish Nailer and Stapler Ergonomic and Lightweight Nail Gun with No Mar Tip for Finish Nails, Brad Nails, and Staples

NuMax

Based on 463 reviews Check latest price

Product description

The NuMax SL31 Pneumatic 3-in-1 16-Gauge and 18-Gauge 2" Finish Nailer and Stapler is a great tool for working on projects such as base boards, cabinet backing, chair rail molding, shoe and crown molding, furniture trim, decorative trim, and window casing. This air powered nail gun and stapler combo is compatible with 16 gauge straight finish nails from 3/4" to 2", 18 gauge brad nails from 3/8" to 2", and 18 gauge 1/4" narrow crown staples from 1/2" to 1-5/8". Designed for quick reloading, the magazine effortlessly switches between fastener types without any kind of adjustment. To get started, open the magazine and load the fasteners. The 18 gauge brad nails are loaded on the left side, 16 gauge finish nails are loaded to the right, and 18 gauge staples are loaded in the center. A reload indicator lets you see when you are running low on fasteners, and a tool-free finger depth adjust allows you to adjust the depth of the nails and staples fast and easy by turning a wheel near the trigger. A no mar safety tip eliminates damage to work surfaces, ensuring professional results for DIYers as well as construction contractors. The body of this pneumatic finish mailer and stapler is ergonomically designed, resulting in a lightweight and rugged tool great for long shifts. A comfort grip handle reduces fatigue while increasing control and accuracy of fastener placement. A very convenient 360 degree adjustable exhaust allows you to easily direct air away from your face and debris. Air tool oil and adjustment tools are included. The Pneumatic 3-in-1 16-Gauge and 18-Gauge 2" Finish Nailer and Stapler will increase your productivity when taking on finish work around the home or job site.

  • Multipurpose Versatility: This pneumatic nailer's 3-in-1 design is compatible with 18 gauge staples, 18 gauge brad nails, and 16 gauge finish nails. It features a comfort padded grip, and a lightweight ergonomic design allows extended daily use with less fatigue.
  • Pro Design: This nail gun features a no mar tip that protects your work surface from damage, 360 degree adjustable exhaust that keeps air, dust, and debris out of your workspace, and a reload indicator to make it easy to see when you are running low on fasteners.
  • The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
  • Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
  • Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question: Could i use this to do a small carpet job mt steps
Answer: Yes. We've face-nailed and blind-nailed over 230 sq/ft of 3/4" with a gun similar to this one. Just be careful when face nailing to make sure you are far enough from the edges, as being too close when shooting the nails could split the end.
Question: Does this model have a depth adjustment
Answer: yes...any 16 gauge straight nail will work 3/4 " to 2 1/2 "
Question: What would be the best compressor to use this with
Answer: 16 gauge nailers only accept 16 gauge-- nerver try using 18 with it.
Question: does this come with nails or are those separate
Answer: Yes it does. 2hp or more is fine and as long as it can reach up to 70-90 psi your fine. Smaller hp will work too but only thing is you will be hearing your compressor turn on to fill tank more often which if you take breaks and breathers is no problem.

Product features

Heavy Duty but Yet Lightweight and Utilitarian

The NuMax SL31 Pneumatic 3-in-1 16-Gauge and 18-Gauge 2" Finish Nailer and Stapler is lightweight power tool can be used to finish your projects or repairs as it features an aluminum body, ergonomic comfort grip handle, replaceable base plate and 3-in-1 design that allows you to easily switch between T-cleats, L-cleats and staples for maximum functionality.

Easy to Use

This tool by NuMax can be used in various applications around home such as upholstery, insulation, screen repair, woodworking projects, fencing and repairs. This tool is also extremely safe to be used as it comes in a die cast aluminum body and a quick release for clearing jams.

Brad Nailer, Air-powered, TACKLIFE 18GA 2-in-1 Nailer, 5/8”-2", Wider Visual Nail Indicator, 200pcs Brad Nails and 200pcs Crown Staples, 360 Degree Adjustable Exhaust, and CE Safety Glasses | TK5040

Based on 1 reviews Check latest price
  • This air powered nail gun has a great power, slight marks possibly left on the surface of wood, which is a normal phenomenon. We also prepare an empty oil bottle to fill with the oil you prefer.
  • 【Full Brad Nail Gun Set】This Air Nailer includes: 2-in-1 brad nailer, 200 18-ga. brad nails 2”and 200 18-ga. crown staples 1-5/8", a hard-shelled carrying case, one【empty】oil bottle, one CE safety glasses, two hex wrenches. An air Compressor is not sold with brad nailer.
  • 【MULTIFUNCTION】2-in-1 magazine drives both 18 gauge pneumatic brad nails and crown staples making this a highly versatile tool. It can accommodate nails ranging from 5/8”-2", staples ranging from 5/8”-1-5/8".
  • 【STURDY MATERIAL】 Heat treated aluminum housing-extra heavy duty industrial design high-capacity magazine holds up to 100 brad nails or crown staples; Working air pressure 70-100PSI, max pressure 120PSI, which give you a easy perform of nail work.
  • 【 MORE CONVENIENCE】 CE Safety glasses, which prevents accidental firing of wood dust. Nail reload indicator visual nail reload indicator, located on the magazine, alerts the user when nail quantities are low so that blank drives are avoided.
  • 【ERGONOMIC DESIGN】Anti-slip rubber grip and 360 degree adjustable exhaust which give you a better experience with nail gun hitting. Tool-free jam release mechanism for easy nail removal. Safe trigger device provides a safe work.
  • 【BETTER QUALITY】 Brad Nailer can nail 100,000 times, which provides longer service life. The lightweight aluminum body weighs only 2.4lb, which relieves the fatigue of the user during long work.

User questions & answers

Question: How long is the warranty period
Answer: TACKLIFE offers a 24 month warranty on its products. If you have any questions about this brad nailer, please contact us at [email protected] . We will solve the problem for you. Thank you for your question.
Question: Can you use to shingle roof
Answer: No the nails would be long enough but you wouldn't use a brad nail on a shingle. Very good for trim and diy projects around your house.
Question: Does this use narrow or wide crown staples
Answer: 1/4" crown staples.
Question: Does this use narrow (1/4 in. wide) crown staples or the wide one
Answer: Narrow

Product features

The TACKLIFE 18 GA 2-in-1 Pneumatic Brad Nailer

The Tacklife 18 GA 2-in-1 pneumatic brad nailer heat treated aluminum Housing-extra heavy duty industrial design high-capacity magazine holds up to nails. The spacious magazine carries up to 100 brad nails 15-50mm or crown staples 16-40mm while the quick-release design makes jam clearing a breeze. Safety glasses are made from CE, which prevents accidental firing of wood dust.

NOTE: We not sell an air compressor with this pneumatic brad nailer, you need to prepare one before you start your project.

BOSTITCH Finish Nailer, Finish Pneumatic, 2.5-Inch, 16GA (BTFP1664K)

Based on 7 reviews Check latest price

Product description

Bostitch 2.5-in 16-Gauge Finish Pneumatic Nailer

  • Bostitch 2.5-in 16-Gauge Finish Pneumatic Nailer
  • Drives 16 Gauge Straight Finish Nails from 1-in to 2-1/2-in Length
  • Tool-Free Jam Release for Fast and Easy Jam Clearing
  • Adjustable Depth Guide Sets Nails to Desired Depths Quickly and Conveniently
  • Tool-Free Adjustable Exhaust Cap Conveniently Directs Exhaust Away from the User

User questions & answers

Question: Oil or oilless
Answer: Metal. Only the nail track has plastic in it. Best finish nailer on the market. And so were the previous models of this nailer. I have been using Senco finish nailers since the early 90's. They also have a smaller brad nailer that is excellent.
Question: limited warranty
Answer: If you are asking if it will it fire without nails loaded in the magazine?... the answer is yes
Question: What is the large black knob for? Can turn right or left
Answer: Red....and the loews model is red .. I have had my gun for a while now...I performs well at the home owwer level..not professional like my old senco.....I don't stand by the old review and would recommend the Hitachi.....thier guns are better quality.

Metabo HPT Finish Nailer, 15 Gauge, Pneumatic, Angled, Finish Nails 1-1/4-Inch up to 2-1/2-Inch, Integrated Air Duster, Selective Actuation Switch, 5-Year Warranty (NT65MA4)

Metabo HPT

Based on 616 reviews Check latest price

Product description

The NT65MA4 15-Gauge Angled Finish Nailer is the ideal nailer for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases. The NT65MA4 nailer has a compact body and angled magazine making for easier placement and operation in tight angles. The integrated air duster clears debris from the work site allowing for faster and cleaner job completion. The NT65MA4 accepts 15-gauge nails from 1-1/4" up to 2-1/2" in length.

  • 15 Gauge Finish Nailer
  • Integrated air duster can be used to clear away dust and debris from the work surface in preparation for nailing or gluing
  • Same tools. New name. Hitachi power tools has renamed to Metabo HPT
  • Selective actuation switch allows for either sequential or contact nailing with a simple flip of the switch- no tools or parts required
  • Tool-less depth of drive dial adjusts for flush fastening into varying materials for improved control and a professional finish
  • 360-degree fully adjustable exhaust portal directs air exhaust away from the user or work piece
  • At only 4.2 lbs, this finish nailer minimizes user fatigue, while increasing maneuverability

User questions & answers

Question: will bostich FN type nails work in this gun
Answer: No, you must use DA-type nails. The good news is that 95% of nail brands are DA-type: Hitachi, Senco, Nail Pro, Fastener USA, and so on.
Question: Is this similar to Makita nailer and does use other brands of nails
Answer: Good morning, This tool accepts the following. It doesn't have to be Hitachi nails. Have a wonderful day. It accepts 15-gauge nails from 1-1/4" long to 2-1/2" long.
Question: Can I purchase a nose cap for this nailer.. mine didn’t come with one
Answer: Look carefully at your gun. The nose cap is mounted, for transport, on the bottom end of the magazine. It's black, and easy to miss. I returned my first gun, thinking that it was missing the nose cap, as well.....
Question: Nails for this item
Answer: Use only DA-type nails (i.e., NOT Bostitch FN-style).

Product features

Selective Actuation Switch

Allows for either sequential or contact nailing with a simple flip of the switch- no tools or parts required

Tool-less, Easy to Clear Nose

For quick nail extraction should a nail jam during use

360-degree Fully Adjustable Exhaust Portal

Directs air exhaust away from the user or work piece

Factory Installed Air Fitting

Angled upwards to keep the compressor hose conveniently out of the way of the user and work piece

WEN 61764 16 Gauge Pneumatic Straight Finish Nailer with Carrying Case

Based on 187 reviews Check latest price

Product description

Remember when you had a powerful nailer to finish the job? The WEN 16-Gauge Pneumatic Finish Nailer is the perfect companion for crown molding, cabinets, wood furniture, baseboards, trim work, hardwood flooring, paneling and more. The spacious magazine holds up to 100 16-gauge brads at a time, accepting nails anywhere from 3/4 of an inch to 2-1/2 inches in length. Simply attach your favorite air compressor up to the 1/4-inch 18 NPT air inlet and get to firing. The depth adjustment wheel allows users to control how deep the fired nails go while the spring-loaded nail indicator warns you when your nail supply is running low. The quick-release nose makes clearing jams a breeze in the off chance that one occurs. For maximum precision, install the single-fire trigger to prevent from misfiring two nails into the same spot, or to minimize work time, use the sequential trigger for reliable bump firing. Uses 3.8 CFM of air when operating at 90 PSI. And because its a WEN product, your framing nailer comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

  • Features both a contact and a multi-fire trigger for both single and sequential firing modes
  • Accepts 16-gauge brad nails ranging from 3/4 to 2-1/2 inches
  • Depth adjustment wheel allows users to control the depth of the fired nails
  • Magazine holds up to 100 nails at a time
  • Includes a spacious carrying case, rubber-gripped handle, and lubricating oil

User questions & answers

Question: Does it have a no mar tip
Answer: Yes
Question: Is the construction of the clip and cylinder aluminum
Answer: Yes, the main body is cast and the clip is stamped aluminum.
Question: Will this shoot crown staples
Answer: Not a staple gun
Question: Oil or oilless
Answer: OIL great nailer

NuMax SFN64 Straight Finish Nailer 16 Gauge Ergonomic & Lightweight Pneumatic Nail Gun with Depth Adjust & No-Mar Tip (Renewed)

Based on 7 reviews Check latest price

Product description

This pre-owned or refurbished product has been professionally inspected and tested to work and look like new. How a product becomes part of Amazon Renewed, your destination for pre-owned, refurbished products: A customer buys a new product and returns it or trades it in for a newer or different model. That product is inspected and tested to work and look like new by Amazon-qualified suppliers. Then, the product is sold as an Amazon Renewed product on Amazon. If not satisfied with the purchase, renewed products are eligible for replacement or refund under the Amazon Renewed Guarantee.

  • NAILED IT: This 16-gauge pneumatic straight finish nailer features a lightweight & durable aluminum body, ergonomic secure handle. A no-mar tip prevents dents & dings & the quick jam release lets you easily clear jams without taking the nailer apart.
  • MANY USES: It's great for interior & exterior finish & trim, furniture, cabinet work, staircases, base boards, shoe & crown molding, window casing, chair rail molding & much more. Sequential firing & depth adjust allow you to customize for any project
  • THE RIGHT TOOL FOR THE JOB: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
  • QUALITY & DURABILITY: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warranted in the USA
  • TOUGH & DEPENDABLE: We make an array of durable construction tools and accessories, including staplers & nailers for siding, flooring, framing, finish, & roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode & Dewalt.

Metabo HPT Finish Nailer, 16 Gauge, Finish Nails - 1-Inch up to 2-1/2-Inch, Integrated Air Duster, 5-Year Warranty (NT65M2S)

Metabo HPT

Based on 360 reviews Check latest price

Product description

The 16-Gauge Finish Nailer NT65M2S features a non-slip elastomer grip trigger and ergonomically designed simple flip actuation switch. It is ideal for installing molding, chair rail, cabinetry and other fine finish applications. The NT65M2S accepts 16-gauge finish nails in lengths ranging from 1" Up to 2-1/2" And is equipped with Metabo HPT signature air Duster button to conveniently blow away dust and debris instantly to clear the work surface.

  • FASTENERS: 16-gauge finish nails in lengths ranging from 1-in up to 2-1/2-in
  • AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine
  • TRIGGER: Selective actuation switch lets the user easily select bump fire or sequential fire modes
  • LIGHTWEIGHT: Only 3.7 lbs and well-balanced for minimal fatigue and increased maneuverability
  • DEPTH ADJUSTMENT: Tool-free depth of drive adjustment helps to provide a professional finish when fastening into varying materials
  • APPLICATIONS: Ideal for installing molding, chair rail, cabinetry and other fine finish applications
  • EXHAUST PORT: 360 degree, fully adjustable exhaust port directs air exhaust away from the user during use

User questions & answers

Question: what all comes in the box
Answer: 2 inch
Question: Benden refacciones de esa pistola
Answer: I use 16 gauge finishing nails! I’ve used nails from 1” inch up to 2” nails. Had this tool for a year and love it! I use dewalt brand, but other brands will work! The gun will specify what gauge such as 16 in this case!
Question: Is the no-mar tip removable where the no-mar tips is not needed for work other than finish work
Answer: Yes in the first 30 days. Other than that no warranty
Question: What type of air compressor should I buy to use with this
Answer: This is more than a brad nailer. It does 16 ga finishing nails up to 2-1/2 inch in length. I used it for nailing the baseboard in my house.

Product features

Tool-less, Easy-to-Clear Nose

For quick and simple nail extraction should a nail jam during use

360 Degree, Fully Adjustable Exhaust Port

Directs air exhaust away from the user during use

Ergonomically Designed Simple Flip Actuation Switch

For easy transitions between bump fire or sequential fire modes

Factory Installed Air Fitting

Is angled upwards to keep the compressor hose conveniently out of the way of the user and work piece

BOSTITCH Finish Nailer Kit, 15GA, FN Style with Smart Point (BTFP72156)

Bostitch

Based on 149 reviews Check latest price

Product description

SMART POINT TECHNOLOGY: Easy nail placement due to a smaller nose and no need to compress the contact trip to actuate the tool. DRIVES: 15 GA "FN" Style Angled Finish Nails from 1-1/4" to 2-1/2" length. TOOL-FREE JAM RELEASE MECHANISM: For easy nail removal.DIAL-A-DEPTH(TM) CONTROL: For precise countersinking of nails. KIT INCLUDES: Nailer, 1/4" Air Fitting, Carrying Case and Extra No-Mar Tips.

  • SMART POINT TECHNOLOGY: Easy nail placement due to a smaller nose and no need to compress the contact trip to actuate the tool.
  • DRIVES: 15 GA "FN inches Style Angled Finish Nails from 1 1/4 inch to 2 1/2 inch length.
  • TOOL FREE JAM RELEASE MECHANISM: For easy nail removal.
  • DIAL A DEPTH(TM) CONTROL: For precise countersinking of nails. Magazine Capacity 129
  • KIT INCLUDES: Nailer, 1/4 inch Air Fitting, Carrying Case and Extra No Mar Tips.

User questions & answers

Question: Is this nailer (btfp72156) electric or pneumatic? description is vague
Answer: We are building an entertainment center with select pine and polar and have no issues at all.
Question: Where do I buy no mar tips
Answer: 1.3 ah
Question: Is this good to nail door trim and baseboards
Answer: Only 18 gauge finish nails 5/8 to 2"
Question: Why does the description say it comes with air fitting, and also says corded electric
Answer: No it can not. 18ga brad nails only, from 5/8" to 2". The Ryobi P318 is their 23ga pin nailer. That tool does 1/2"-2" pins.

3PLUS HCBFN3SP Pneumatic Angle Finish Nailer & Narrow Crown Stapler & Pinner Combo Kit

Based on 66 reviews Check latest price
  • HDA1564SP- 15 Gauge Angle Finish Nailer, drives 1-1/4" to 2-1/2" 15-gauge angled finish nails
  • H9040SP- 18 Gauge Narrow Crown Stapler, drives 18 gauge 1/4'' crown from 1/2'' to 1-1/2''
  • HP625SP- 23 Gauge Micro Pinner, drives pins from 1/2'' to 1'' in length
  • Includes a canvas carrying bag
  • Combo kit is ideal for trim, furniture and other fine finish applications

User questions & answers

Question: Using for the first time and nailer makes all the sounds but no nail comes out? Any ideas
Answer: Yes works well
Question: Worth buying
Answer: Sorry I have no idea if it works on heavy duty equipment as you mentioned. I would go to a heavy duty shop that does work on trucks etc with some form of documention of the OTC 4579 9-way puller set. This tool helped me pull the axles out of my Jeep Grand Cherokee and CV axle removal on my 2007 Buick Allure but I had to purchase a axle fork for the removal of my CV axles which was not included in the OTC 4579 puller set. I hope this helps you somewhat !
Question: are the triggers bump action
Answer: Yes it will; you may have to use the vice grip attachment included in the kit to grab a hold of the wheel stud if the pulling flange in the kit won't fit. I have used the same procedure on a Chevy HD2500 and it worked like a charm.
Question: What angle degree are the nails? 21 or
Answer: My information states that this item is made in Taiwan.

Product features

3PLUS HCBFN3SP FINISH COMBO KIT

The 3PLUS HCBFN3SP is a 3-piece finish combo kit. It takes care of all of your finishing projects.

Choose the angle finish nailer for fine-finish applications such as chair rail, cabinetry, crown molding, window casings and base boards.

The narrow crown stapler is the perfect choice for decorative trim, cabinet backing, picture frames, crafts, and hobbies.

The pinner is appropriate for light fastening and clamping applications including, small trim and small decorative moldings, cabinet crown molding, small picture frames, and any other material that brad or finish nails would split.

What's in the box?
FEATURES:

  • HDA1564SP 15 Gauge Angle Finish Nailer
  • Uses: 15 Gauge angled finish nails ranging 1-1/4" to 2-1/2" in length.
  • The thumb wheel depth adjustment for flush fastening into varying material for improved control and a professional finish.
  • Multi-directional exhaust cover rotates 360° to direct exhaust air away from user.
  • A no-mar tip protects work surface from any undesired damage.
  • Quick clear jam release functions for easy maintenance.

Latest Reviews

View all