10 best dewalt brad nailers

Product description

The new DEWALT DWFP12231 18 gauge, 2-Inch Brad Nailer Kit is an excellent tool with many enticing qualities. It features a long life maintenance-free motor to keep from staining the work surface. The magnesium body delivers a strong and lightweight design. It also features a tool-free depth -of-drive adjustment with detents for proper setting of nail heads, along with a tool-free jam release mechanism for easy nail removal. The rear exhuast helps to keep contaminates away from work. This unit is made to drive 18 gauge nails from 5/8" to 2" in length, with a sequential style trigger, and 100 nail magazine capacity. This unit has a removable non-marring nose tip with on tool storage, and an integrated rubber grip for improved comfort and anti-slip grip. It also has an adjustable belt hook which allows the tool to be kept near the user. This kit also includes carrying case and owner's manual. Refer instruction manual before use. A compressor is required and not included.

• Long life maintenance-free motor to keep from staining the work surface
• Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
• Tool-free jam release mechanism for easy nail removal
• Rear exhaust to keep contaminates away from work. Operating pressure 70 - 120 psi
• Drives 18 gauge nails from 5/8" to 2" length. Power Source: Pneumatic. Power Tool Type: Pneumatic. Note: There are no nails included
• Compressor is required to use this product but is not included

User questions & answers

Question:	Can someone recommend an air compressor that would power this nailer? I don't know a lot about tools and don't want to buy larger than i need
Answer:	: A Husky 4 gallon portable will run three of these nailers. I believe it cost me $250.00. It's pretty quiet. Both of these cost less than a battery one
Question:	What is the difference between 18 gauge brad nailer and 16 gauge finishing nailer? I need to install trim, build bookcase and install decking floor
Answer:	Brad nails are formed from a fine 18 gauge wire, while finish nails are made from heavier 16 or 15 gauge wire. Finish nails are the correct choice for fastening larger crown and baseboard trim, brad nails are used to install smaller trim to help prevent splitting and to promote a cleaner looking job with less touch-up work after the nailing is done.
Question:	Would I need to purchase anything else (battery) in order to use? I know absolutely NOTHING about power tools
Answer:	Hello, Thank you for writing ACME Tools. The DWFP12231 Brad Nailer is a Pneumatic tool so you will have to use an Air Compressor and a hose with the proper fittings. Other than that, this unit is very straight forward and easy to use.
Question:	what is the voltage
Answer:	The voltage is 765 kV and it is also powered by two Siemens & Halske alternators rated 30 hp (22 kW), 2 kV at 120 Hz and uses 200 series-connected Gaulard 2-kV/20-V step-down transformers provided with a closed magnetic circuit, one for each trigger. Hope this helps.

Product features

DEWALT DWFP12231 18-Gauge 2-Inch Brad Nailer Kit

Product description

The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8" to 2-1/8" which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
• Compatible with all DEWALT 20V MAX* batteries
• Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
• Tool-free selectable trigger for sequential or contact actuation modes
• Low nail lockout prevents dry firing and unwanted marks on the work material

User questions & answers

Question:	Is this a straight brad nailer for 5/8"-2" brads or an angled finish nailer 1-1/4 thru 2-1/2 finish nails
Answer:	THIS IS A STRAIGHT BRAD NAILER. 5/8" - 2".
Question:	Is this the same battery of 20v max drill
Answer:	Yes. To my knowledge all "20V Max" tools from DeWALT use the same battery. I have several tools and all the batteries work with all the tools.
Question:	Please confirm this kit includes the charging unit, battery and bag
Answer:	Mine came w/ those items since it is a kit & not tool only.
Question:	Can i nail 2x4 with this im building a garage
Answer:	Are you being serious? I really hope not! If you are, do not build anything! This gun is designed to fasten trim to walls like baseboard, casing etc. A "framing gun" is designed for "framing"... Dewalt has battery framing guns, they're about $100 more. But don't buy one. Call a pro, have them build your garage.

Product description

DeWALT DWFP1KIT 165 PSI 18 Gauge 2-1/8" Pneumatic Nailer w/Compressor Combo Kit

• Includes full manufacturer warranty

User questions & answers

Question:	what length of brad nails can I use with this
Answer:	Up to 2 inch.
Question:	correction not cord - how long is the hose
Answer:	25 foot

Product description

The PORTER-CABLE PCC790LA 20V MAX Lithium 18GA Brad Nailer Kit is 100% battery powered which eliminates need for compressor, hose or costly gas cartridges. The special motor design provides consistent firing power into various materials and climate conditions. This nailer features multiple tool free settings to provide increased productivity and user safety. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions reducing user fatigue. It also offers multi functional dual LED lights to light up your workspace, and indicate errors. Fastener length capacity of 5/8" - 2", magazine capacity of 100, with sequential firing mode and trigger lock. Includes Battery, and Charger.

• NO COMPRESSOR NEEDED: This cordless brad nailer is battery powered, eliminating the need for a compressor, hose, or expensive gas cartridges.
• CONSISTENT DRIVING DEPTH: Our depth adjustment wheel allows you to properly countersink nails consistently. Nail Diameter: 18 gauge
• INCREASED PRODUCTIVITY: A tool free release lever, jam release, and depth adjustment wheel make your life easier.
• BETTER RUNTIME: Included 1.5 Ah 20Volt MAX Lithium ion battery lasts longer than NiCad, charger included. Integrated Belt Hook: Yes
• 3 YEAR LIMITED WARRANTY: PORTER CABLE will repair, without charge, any defects due to faulty materials or workmanship for 3 years from the date of purchase.

User questions & answers

Question:	Does this come with a charger
Answer:	This one does come with a battery & charger, but they sell a model without a charger
Question:	Would this tool work to repair my fence
Answer:	Sure it can repair your fence and build you new fences too I use it every day for at least two hours . Great tool I have not use my compressor from I bought this tool. But do not use the nailer alone use screws too.
Question:	Will it go through 1" oak trim
Answer:	yes
Question:	can i use multiple lengths of nails
Answer:	5/8 inch through 2 inch nails....awesome gun...i am so happy with it

Product description

Precision point technology: precise nail placement as a result of a smaller nose compared to current DeWalt nailers and No need to compress the contact trip to actuate the tool. Kit includes: nailer, 1/4" swivel fitting, sample brad nails, carrying case and extra no-mar tips.

• Tool-free depth-of-drive adjustment for proper setting of nail heads
• Rear exhaust to keep contaminates away from work
• Drives 18 GA Brad nails from 5/8" to 2-1/8" length
• Tool-free jam release mechanism for easy nail removal
• Selectable trigger: sequential or contact actuation

User questions & answers

Question:	How much pressure required to trugger
Answer:	I don’t know about minimum but it works fine at 90-100.
Question:	Is this Oil-free
Answer:	Yes oil free... the piston ring and cylinder are both made of Teflon... oil will destroy the gun.
Question:	This Nailer is sold with a case
Answer:	Affirmative a nice hard case
Question:	Does it come with a case
Answer:	Yes holds instruction book and gun very little room for nails

Product description

The DEWALT Electric Multi-Tacker loads a variety of staples and brads from heavy duty, narrow, cable, 18-Gauge brads and 18-Gauge headless brads. Due to the variety of staples and brads that the Electric Multi-Tacker is compatible with, there are numerous applications for this tool such as installing carpet, installing sheets of insulation and attaching lightweight trim using the brads, to name a few. This tacker is bottom-loading and makes loading user-friendly

• Brand New in box. The product ships with all relevant accessories

User questions & answers

Question:	Does anyone have an operators/owners manual? can you share it
Answer:	Sam's Dad. You realize that 5/8" is equal to 10/16" which is 1/16" larger than 9/16"; I wonder how your 9/16 did not fit but 5/8 did?
Question:	can it use 1.5 inch braid nails
Answer:	what size brads does it take
Question:	Can this use 1 inch t-nails
Answer:	Yes, this would work for chairs, upholstery - the staple size would allow for that. Also, the tension pressure is string enough to get through the fabric.
Question:	What size nails will it take
Answer:	No longer includes ANY staples at all.

Product description

The DEWALT DWC1KIT-B Brad Nailer and Compressor Combo Kit features a DWFP12231 18 GA brad nailer, and a DWFP55126 compressor. The Brad Nailer drives 18 gauge nails from 5/8" (16 mm) to 2" (50 mm) length. This nailer offers a long life, oil-free motor with a tool-free depth-of-drive adjustment with detents for proper setting of nail heads. It also has a tool-free jam release mechanism for easy nail removal. The rear exhaust to help keep contaminates away from work, and a magnesium body delivers strong & lightweight design. It also has a removable non-marring nose tip with on tool storage, and an adjustable belt hook that allows the tool to be kept near the user. The Air Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI for long tool runtime and fast recovery (Tested per ISO 1217). The durable oil-free pump provides long maintenance-free operation, and a low 75.5 dBA for a quiet work environment (Tested per ISO 3744). The low 10 Amp draw motor starts easily in cold weather or with extension cord, and it has two regulated, factory installed air couplers to easily support two users. Shroud includes heavy-duty handle, cord wrap and console cover to make unit easy to carry; only 30 lbs (13.6 kg) for easy portability. Kit includes: DWFP12231 18 ga Brad Nailer, DWFP55126 Compressor, Air hose with fittings, sample fasteners, and owners manual.

• DWFP12231 Brad Nailer drives 18ga nails from 5/8" to 2" length.
• DWFP55126 Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI
• Tool-free depth-of-drive adjustment and tool-free jam release
• Low 75.5 dBA for a quiet work environment
• Kindly refer user manual for instructions.
• DWFP12231 Brad Nailer drives 18ga nails from 5/8" to 2" length.
• DWFP55126 Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI

User questions & answers

Question:	what is HP
Answer:	These products are not rated in HP.
Question:	Can i use 200 feet of air house will the compressor take it
Answer:	It's not advisable to use such a long air hose, even if it would work. It would be useful to inquire about a long electrical extension that would go at least half way. A qualified electrician could shed some light on this (pun intended). I wouldn't do either; there is some risk in running electrical wire or an air hose under pressure such a long distance.
Question:	Is this good for crown molding and flooring installs with it support for what I am looking to do
Answer:	Ideally you will want a finish nailer for crown molding work. Please contact DEWALT at 1-800-433-9258 for further assistance.
Question:	What is the length of the included hose
Answer:	I haven't measured it but I'm thinking it's probably a 25'

Product features

DEWALT DWC1KIT-B Brad Nailer and Compressor Combo Kit

The DEWALT DWC1KIT-B Brad Nailer and Compressor Combo Kit features a DWFP12231 18 GA brad nailer, and a DWFP55126 compressor. The Brad Nailer drives 18 gauge nails from 5/8" (16 mm) to 2" (50 mm) length. This nailer offers a long life, oil-free motor with a tool-free depth-of-drive adjustment with detents for proper setting of nail heads. It also has a tool-free jam release mechanism for easy nail removal. The rear exhaust to help keep contaminates away from work, and a magnesium body delivers strong & lightweight design. It also has a removable non-marring nose tip with on tool storage, and an adjustable belt hook that allows the tool to be kept near the user. The Air Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI for long tool runtime and fast recovery (Tested per ISO 1217). The durable oil-free pump provides long maintenance-free operation, and a low 75.5 dBA for a quiet work environment (Tested per ISO 3744). The low 10 Amp draw motor starts easily in cold weather or with extension cord, and it has two regulated, factory installed air couplers to easily support two users. Shroud includes heavy-duty handle, cord wrap and console cover to make unit easy to carry; only 30 lbs (13.6 kg) for easy portability.

Kit Includes:

Product description

DEWALT 5-in-1 Multi-Tacker

• This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box

User questions & answers

Question:	how it works installing metal Corner bead
Answer:	It’s junk. Get the Arrow T50 instead
Question:	What size brad nails fit this tool
Answer:	It says on the picture 18ga brads, but the largest size staples I have used is about 1/2" so I suspect that size brads. I had not even realized it could be used for brads until you asked and then I looked at the packaging shown and, indeed, it says it can handle (I assume collated) brads. I wonder how they would load.
Question:	what staples to use
Answer:	You have several options. They are all on the side of the stapler. I bought arrow brand nails and staples. Main tip to know is load the staples through the front of the stapler not the back! Took me a lot of time to figure that one.
Question:	It has a plastic or aluminum housing
Answer:	Yeah, old question, but as said above. Both the 510 and 'older but still available' 410 have aluminum housings. I've had my 410 (same gun, just doesn't take the 'narrow' flat staples or something) for a few years, great stapler. Just ALWAYS pay attention to the staple being loaded and what setting you're using. The wrong 'mode' can cause a jam that wrecks the spring loader mechanism, and ruins it...so i've read. I've never had a problem/jam so far, but always keep an eye on that. Made custom lattice for a deck 'skirt' out of strips from leftover 2x4 PT pine, was perfect for that.Not sure what Dewalt did between the 410 and 510 availability, but 410's are still on the shelf at my local HD. Some are saying the 510 was discontinued, as were the specific 'extra' staples it accepted.

Product description

Includes (10) 9R195661 No Mar Pads. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Compatible with: DeWALT: DWFP12231 Type 0 18GA BRAD Nailer

• Sold on Amazon

Product description

The DEWALT DCN650 15 Gauge Angled Finish Nailer drives 15 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, baseboards, and hardwood floor installation. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN650 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• Diagnostics with LED indicator Communicates battery charge status: charged
• Charges all DEWALT 12V - 20V max li-ion batteries from a vehicle's power outlet enabling batteries to be charged while driving to work or on a jobsite
• Automatic shut-off protects excessive discharge of vehicle's battery
• *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

User questions & answers

Question:	Can I use this for trim
Answer:	I plan to use mine for trim shortly (shorter nail). Used longer nail for 3/4" pine tongue and groove wall. Love the product.
Question:	How many finish nails does one battery fire? I know the battery size will influence the number significantly but is it closer to 150 or
Answer:	I use mine all day and on a fresh battery it will go the distance. I have never felt like the batteries were an issue vs amount of nails shoot
Question:	Will this gun shoot staples also
Answer:	no 1 1/4'' to 2 1/2 15ga finish nails only.
Question:	Does this include the battery, charger and bag
Answer:	Yes, It includes both