12 best 3m nail guns

Product description

Similar to Bostitch RH-S16D162EP & Grip-Rite GR312162

Make sure your tool model will accommodate .162" shank diameter.

These 3 1/2" strip nails are 21 degree angle, collated (held together) with a plastic strip. Made of .162" (8 gauge) SMOOTH shank non galvanized brite steel, they are commonly used for wood framing applications. Not recommended for ACQ Treated Lumber. Our full round head 21 degree angle 3 1/2" gun nails are compatible with 20, 21, and 22 degree angle framing nailers with the capacity for .162 diameter. Each case contains approximately 3,000 nails.

Compatible Framing Nailer models include:

Hitachi NR90AC, NR90AC2, NR90AC3

Bostitch F21PL, F21PL2 (magazine adjusts to accommodate .162" dia)

Makita AN923

Porter Cable FR350MAG

Ridgid R350RHA

Senco FramePro 752XP

Applications Include:

Framing, truss building, subflooring, side wall and roof sheathing, pallets and crate assembly.

• Make sure your tool model will accommodate .162" shank diameter.
• Brite
• 3-1/2"
• .162"
• Case

User questions & answers

Question:	x 0.162 purchased from your website, but they wont fit in the bostitch f21pl. it goes in the magazine of the metabo nr90ac5 but doesn't slide
Answer:	That means there's a nail stock in the chamber
Question:	Are these the rough size of a 16d
Answer:	It takes up to a 2”, 18 ga, brad nail and up to 1 and 9/16” 18ga light duty staple. It has worked well for me and would buy it again.

Product description

Remember when you could build whatever you wanted? Nail nails and fasten fasteners with the WEN 18-Gauge 2-Inch Pneumatic Brad Nailer. Fire 18-gauge brads anywhere from 3/8 to 2 inches in length. Our spring loaded magazine makes for quick and easy reloads with enough space to hold up to 106 nails. The lightweight body combined with the rubber-lined handle limit fatigue during long days on the job. Operating pressure ranges rom 60 to 115 PSI with the nailer consuming 0.028 CFM of air per nail at 88 PSI. The 1/4-inch NPT air inlet allows for quick connection to your favorite air compressor. Adjust the firing depth of the nailer with the simple turn of the depth adjustment wheel. Check the amount of remaining nails through the gauge window mounted on the side of the magazine. Unlatch the front nose to clear jams quickly and easily. Adjustable air exhaust lets users direct the pneumatic air output in any direction while the powder-coated finish prevents wear and tear to the nailer’s body. This package also includes lubricating oil, hex keys, 500 3/8-inch nails, 500 3/4-inch nails, 500 1-inch nails, and 500 2-inch nails. And, because its a WEN product, your nailer comes backed by a two-year warranty and a friendly customer help line all to make sure you remember WEN.

• Shoot 18-gauge brads ranging from 3/8 to 2 inches in length
• Operate at 60 to 115 PSI with the 1/4-inch NPT air inlet fitting
• Features a depth adjustment wheel, a nail gauge, a rotatable exhaust, and a quick release 106-nail capacity magazine
• Hassle-free nose latch makes clearing jammed nails quick and easy
• Includes 500 18-gauge 3/8-inch nails, 500 18-gauge 3/4-inch nails, 500 18-gauge 1-inch nails, and 500 18-gauge 2-inch nails

User questions & answers

Question:	Can I use this to put on a board & batten wall? 3” strips, 1/2” thick
Answer:	Yes. It comes with various nail sizes to fit that job.
Question:	Does the one that comes with 500 nails include a case
Answer:	A case does NOT come with the WEN 61721 (with 500 nails option).
Question:	Es electrica o de compresora
Answer:	Con comprensión
Question:	Does this have a metal magazine? I have Hitachi that broke twice from light use due to magazine being plastic
Answer:	Yes the magazine is metal. This is a great tool

Product features

Hassle-free Nose Latch

The nose latch makes cleaning jammed nails quick and easy.

Adjustable Exhaust Port

Adjust the air exhaust to direct the pneumatic air output in any direction.

Depth Adjustment Wheel

Adjust firing depth of the nailer with a simple turn of the depth adjustment wheel.

Spring Loaded Magazine

The spring loaded magazine makes for quick and easy reloads and holds up to 106 nails.

Product description

The PORTER-CABLE PCC790LA 20V MAX Lithium 18GA Brad Nailer Kit is 100% battery powered which eliminates need for compressor, hose or costly gas cartridges. The special motor design provides consistent firing power into various materials and climate conditions. This nailer features multiple tool free settings to provide increased productivity and user safety. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions reducing user fatigue. It also offers multi functional dual LED lights to light up your workspace, and indicate errors. Fastener length capacity of 5/8" - 2", magazine capacity of 100, with sequential firing mode and trigger lock. Includes Battery, and Charger.

• NO COMPRESSOR NEEDED: This cordless brad nailer is battery powered, eliminating the need for a compressor, hose, or expensive gas cartridges.
• CONSISTENT DRIVING DEPTH: Our depth adjustment wheel allows you to properly countersink nails consistently. Nail Diameter: 18 gauge
• INCREASED PRODUCTIVITY: A tool free release lever, jam release, and depth adjustment wheel make your life easier.
• BETTER RUNTIME: Included 1.5 Ah 20Volt MAX Lithium ion battery lasts longer than NiCad, charger included. Integrated Belt Hook: Yes
• 3 YEAR LIMITED WARRANTY: PORTER CABLE will repair, without charge, any defects due to faulty materials or workmanship for 3 years from the date of purchase.

User questions & answers

Question:	Does this come with a charger
Answer:	This one does come with a battery & charger, but they sell a model without a charger
Question:	Would this tool work to repair my fence
Answer:	Sure it can repair your fence and build you new fences too I use it every day for at least two hours . Great tool I have not use my compressor from I bought this tool. But do not use the nailer alone use screws too.
Question:	Will it go through 1" oak trim
Answer:	yes
Question:	can i use multiple lengths of nails
Answer:	5/8 inch through 2 inch nails....awesome gun...i am so happy with it

Product description

The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8 in. to 2-1/8 in. which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
• Brushless motor maximizes runtime and durability
• Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC608)
• Tool-free depth adjustment for precise countersinking of nails
• Tool-free jam release to quickly and easily clear nail jams

User questions & answers

Question:	Where do I get the end tips at
Answer:	That no-mar tip, as it's called, is no longer available. https://www.ereplacementparts.com/dewalt-dcn680b-type-20v-18ga-brad-nailer-parts-c-1009_1165_567196.html
Question:	Is the 20v battery included
Answer:	No, the battery was not included.
Question:	What is max nail length
Answer:	The Dewalt brad nailer shoots brads from 5/8” up to 2-1/8”. Hope this helps.
Question:	Does anybody know which dewalt nailer would be a good all around gun for trim to framing in one
Answer:	Unfortunately, there is no such gun made. By any manufacturer. A nail that would be strong enough for framing, would absolutely destroy trim pieces.

• The NoCry Safety Glasses keep your eyes safe from direct and peripheral threats, thanks to the strong and durable polycarbonate wraparound construction. Bonus: they also protect your eyes from 90-100% of harmful UV radiation.
• The curved 5” temple arms can be extended and angled, while the non-slip tips and soft rubber nose piece allow for custom fit and comfort. The 6” frame width will fit any face type or head size - men, women and youth.
• The clear (untinted) lenses let you see everything with zero distortion, are anti fog and scratch resistant. Make sure to clean and store your safety glasses properly to keep them in tip-top condition - we’ve sneaked some helpful instructions in the package.
• Designed for woodworking and carpentry, metal and construction work, lab, chemistry, dental and medical work, indoor and outdoor shooting (always double-check the safety requirements of your local shooting range), cycling, riding or sports - anything you’d need PPE eyewear for.
• If your safety glasses don’t perform as they should or simply aren’t for you, let us know, and we'll send you a free replacement or issue a quick refund.

User questions & answers

Question:	I have a larger than normal head, will this fit me
Answer:	This model is not designed to fit over prescription glasses. However, we have launched another model of NoCry safety glasses that is. You can find them here: https://www.amazon.com/dp/B071RSM598
Question:	Are they z87 certified
Answer:	Our regular safety glasses and safety sunglasses are currently not ANSI Z87.1 certified, but we are looking into the possibility of subjecting the glasses to this certification process in the near future. If OSHA / Z87 certification is a requirement for you, then our over-spec safety glasses might be of interest to you, as they are fully ANSI Z87.1 and OSHA certified. You can check them out here: https://www.amazon.com/dp/B071RSM598
Question:	Can these fit over prescription glasses
Answer:	Out of the box the Bostitch F21PL has a spacer installed in the magazine for .113 to .131 diameter which needs to be removed to accommodate for .148 to 162" diameter.
Question:	Does this meet the ansi z-87.1 standard
Answer:	16d nails are 3-1/2" length but can come in a wide range of diameters depending on the application. This specific item is a 16d Common which means it is the maximum length and diameter available in this penny size.

Product features

NoCry Safety Glasses, Black & Red Frames

Technical specs

• Material: Latex free polycarbonate
• Lenses: Clear, with anti-scratch & anti-fog coatings
• UV protection: 380nm (nanometers)
• PPE field of view: >40°
• Max temple arm length: 5”
• Max nose bridge diameter: 1”
• Total frame width :6”
• Max frame height: 1.77” in the center
• Weight: 0.055lbs

How to best keep the lenses in good condition?

To safeguard the protection features of your glasses, and get the best of them, we recommend you gently wipe the lenses with a dry or damp microfiber cloth to clean the sides, ear and nose pieces, and store them in the NoCry protective case (sold separately) when not in use. Avoid using rough cloths or household glass cleaner, as these can scratch and damage the coating, defeating the point.

Will these glasses be slipping off your face?

No they won’t - because we know how annoying that can be. They're designed to sit firmly on your face, have better grip, and yet still be comfortable - the soft rubber covered tips grip firmly behind the ears, and the curved extendable temple arms can be angled to ensure a snug fit for any head size or face shape. Wear them under a hard hat, earmuffs, behind a respiratory mask, or at a rock concert! They aren’t however meant to fit over prescription glasses - if that's what you're looking for, search “NoCry overspecs” .

Are they comfortable enough to wear all day?

According to hundreds of customer reviews, these safety glasses are so comfortable you'll forget you're even wearing them. Their unique contoured design shape hugs your cheekbone area, and their unobstructive lightweight construction and the soft rubber nose piece let them sit lightly on your face. They won't feel bulky or awkward even after hours and hours at the workshop or construction site, operating room, school or university science lab, shooting range, racquetball court, or watching paint dry.

Since these glasses are clear, how do they protect you from UV light?

It’s all about the 380nm UV protection lens coating - the highest industry standard for all UV protection in clear PPE eyewear lenses. This lens coating will shield your eyes from 90-100% of harmful UVA and UVB radiation rays, and will also protect you from UV light emitted by artificial light sources. Bonus: You can use these glasses in extreme conditions either indoors or outdoors, in a freezer or for blowing glass.

• 【2-IN-1 Tool】No cords, no limits! KIMO cordless brad nailer proves that you don’t need noisy air compressor or tangles of hose anymore to drive brads like a pro. KIMO only designs the best nail guns and makes it possible for you to have both nailing and stapling function simultaneously at a modest price. (Suitable for 18 GA nails: 3/4’’to 2’’, and 18 GA staples: 3/4’’to 1-5/8’’)
• 【Dual Modes & Convenient Operation】Easily alternate between sequential and contact-actuation with our dual-mode toggle switch, which means you can fire a single brad with each trigger squeeze or a series of them by bumping the contact element at a speed of 80 nails/min. Adjust firing depth with the rotation knob at the top of the gun, making it easy for a wide range of materials and different needs in nailing.
• 【Proudly Present KIMO Li-ion Technology】For over 25 years, KIMO has made significant progress in the 1,000-Charging Cycle Test that ensures each KIMO lithium-ion battery is more powerful and lives longer than others. With this 2.0Ah battery freshly charged, driving a total 700 brads into woods, and the tool doesn’t falter. Go with KIMO, and no worries about dying cells anymore!
• 【Lightweight Design & LED Lighting】Tool weight matters. Think about it; if you are installing crown molding overhead, a few extra pounds could make the difference between aching your shoulder and a pain-free job. KIMO nailer/stapler weighs in at a slight 6 lbs. Also, a pair of front-positioned LED lights provide a bit of aid besides the gun when nailing in a dark place.
• 【Compact and Comprehensive Set】The compact size lets the nailer fit into tight spaces and work in awkward positions where it might be difficult to swing your hammer and drive in a tiny nail. Now, a simple one-click helps you get the most valuable toolkit. Each 18GA Brad Nailer/Stapler Kit comes with 1* 20V 2.0Ah Lithium-ion Battery, 1* Fast Charger, 700 PCS 18GA nails, 300 PCS 18 GA crown staples, and 1*Allen Wrench for releasing jams.

Product features

Mind-Blowing Cordless Power and Unrivaled Runtime

Founded in the 1990s, KIMO has grown from a small workshop to a global enterprise that develops, designs, manufactures, and sells Lithium-Ion Power Tools in the past 25 years. As a capabilities-driven company, KIMO has dedicated to providing robust one-stop solutions to users around the world. Due to the breakthrough we made in lithium-ion technology, KIMO has been creating a single-battery system to power every 12V/20V KIMO tool. Professionals absolutely love the unrivaled runtime of the power, and creative DIYers enjoy the versality of our tools. Whoever you are, KIMO's got your back!

KIMO 20V 2-IN-1 Cordless 18GA Brad Nailer & Stapler

Have you ever dreamed of the sheer ease of remolding your home or tackling weekend building projects with a nail gun? The KIMO 2-in-1 Brad Nailer should be your entry point. The battery-powered nailer/stapler delivers 80 pieces of 18-gauge brads/staples per minute, being suitable for finish work, trim, crown, baseboards, and other light materials. The patented air cylinder makes this nailer a solid performer with plenty of power for trim and other finish carpentry tasks. KIMO kindly prepare a juicy 2.0Ah lithium-ion battery in the package to ensure prolonged runtime. Be a smart investor, you will never go wrong with KIMO.

Lightweight and Compact Design

While no battery-powered tool can ever be considered lightweight and compact, the KIMO is one of the lightest cordless nailers on the market, at just 5 pounds (minus the battery). It’s expected to stay for long in your hands and attached comfortably to your belt.

Decent Nail Capacity

KIMO brad nailer features a 2-in-1 bottom-load magazine that is compatible with either 100 pcs 18 gauge brad nails (3/4” to 2”) or 1/4” narrow crown staples (3/4” to 1-5/8”) for maximum versatility.

No Cords, No Limits

Are you ready to work without the hassle of using gas, compressor, and hose? Have you ever wondered to tackle jobs both large and small with the features of a pneumatic and the freedom of cordless? No matter you are professionals or artistic fanatics, you may find KIMO brad nailer a judicious choice.

Adjustable Depth of Drive

Tool-free depth adjustment for flush and precise countersinking of nails. KIMO is able to drive 18 GA brad nails from 3/4 in to 2 in, making the nailer ideal for fastening decorative molding, casing, kitchen crown, and shoe molding.

1400 Nails per Charge

Charging in only 45~60 minutes, the battery fires up to 1400 shots per charge with a 20V 4.0Ah battery and fastens 80 nails every minute, so you can get the job done faster.

Dual LED Lighting

Dual built-in LED lights located near the firing head is effectively bright to illuminate all operation especially for you in dark working environment, ensuring precise control in poor light.

Moulding

The narrow body tool is easy to handle and work in tight space, making it ideal for floor moudling.

Furniture Building

A nice pal for your detailed furniture building and assembly, reducing the risk of damage thin pieces of trim.

Frame Triming

The lightweight and compact design ensures the safety operation overhead.

Product description

RYOBI P325 18-Volt ONE+ AirStrike 16-Gauge Cordless Straight NailerCordless power drives up to 800 nails per chargeNo compressors, hoses or pricey gas cartridges requiredProvides optimum convenience and performance

• AIR PRESSURE ADJUSTMENT: A switch on the back of the unit allows you to increase the depth of your nail driving
• LED LIGHTING at the head allows you to see the job while you’re working in dim conditions. It can be activated by a separate trigger, too, which keeps you safe from accidentally firing off nails when you don’t want to
• LOW NAIL INDICATOR: Help prevent against dry firing by knowing that you need to replace the clip before you damage your woods
• TOOL-FREE ADJUSTMENTS: Knobs can adjust your depth, and you can flip out the front end to clear nail jams
• ONE+ COMPATIBLE: This tool is part of the One+ family, which means you can use this with Ryobi’s 18V batteries, including the P100, P102, P103, P104, P105, P107, and P108

User questions & answers

Question:	Is this normal? I laid it flat on the floor overnight and when I checked in the morning there were some lubricant that oozed out on the motor side
Answer:	I too had some lubricant that was oozing out of mine. I would drop a few extra bucks and get the DeWalt....my Dewalt works perfectly every single time and doesn't make a mess.
Question:	How is this on hard wood like oak
Answer:	It works just fine on oak and every other wood I've tried.
Question:	Will this wotk with p191 3.0 ah lithium+ hp high capacity batteries
Answer:	In general any 18V ONE+ battery works with any 18V ONE+ compatible tool. As noted, this particular ASIN is TOOL-only and does not include the battery or charger). The tool is for use with ONE+ 18V nickel-cadmium and 18V lithium-ion battery packs. See tool/appliance/battery pack/charger correlation supplement 987000-432.
Question:	whats the difference between this tool and Ryobi Cordless BRAD NAILER 18GA Model P
Answer:	The main difference is between the nails that this and the P320 take. The P320 takes 18 gauge brad nails and this tool takes larger 16 gauge finish nails. Functionally, the smaller brad nails have less holding power but are less visible since they have a smaller head. The larger brad nails are good for things such as base-boards but are more than you would generally need for things such as trim. In my research, I was told several times that if you are only going to get one nailer, get the larger 16 gauge finish nailer. This is because you can still the 16 gauge for trim (it just needs some caulk to cover the holes) but you generally cannot use the smaller 18 gauge brad nails for things that require more power (like base-boards).

Product description

The NV45AB2 1-3/4-Inch Roofing Nailer is used for various construction work such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine. When only the best will do for roofing applications, choose the roofing nailer that has been sought after by professionals for decades.

• APPLICATIONS: Ideal for installation of asphalt roofing shingles and insulation boards
• EASY FASTENER INSTALLATION: Side loading magazine, convenient and easy for quick replenishment
• LIGHTWEIGHT: At only 5.5 Lb., the NV45AB2 is lightweight and well balanced for easy maneuverability
• SPEED: Quick driving system, for maximum efficiency
• DEPTH ADJUSTMENT: Tool-less depth of drive adjustment, for precision nailing/flush driving
• RUBBER PADS: Help keep nailer from sliding off roof when not in use
• CARBIDE TIPPED PUSH LEVER: Reduces wear
• DURABLE: Pneumatic power feed and return, allows tool to operate in the harshest conditions

User questions & answers

Question:	Recommended air pressure
Answer:	Hello, Thank you for your interest in the Metabo HPT Roofing Nailer. The recommended air pressure is between 70 and 120 PSI. Thank you again and have a great day!
Question:	Can I used .092” nails or do I have to use .12” nails
Answer:	Hi there! This tool only accepts nails that are .120" in diameter. Hope this helps!
Question:	Does it come with the carrying case
Answer:	No it does not
Question:	Diámetro medida de la manguera
Answer:	Muy bueno la pistola gracias

Product features

Side Loading Magazine

Convenient and easy for quick replenishment

Long-lasting Rubber Grip

For added comfort

Carbide Tipped Push Lever

Reduces wear

5.5 lbs, Lightweight and Well Balanced

For easy maneuverability

Product description

Sfr2190 features: -Framing nailer. -360° adjustable exhaust. -Finger depth adjustment. -Ergonomically designed comfort grip. Type of nailer: -Framing nailers. Type of fastener: -Framing nails. Generic dimensions: -20.75'' h x 15'' w x 5.75'' d. Dimensions: Overall height - top to bottom: -20.75 inches. Overall width - side to side: -15 inches. Overall product weight: -8.5 pounds.

• Nailed It: This 21 degree pneumatic framing nailer features a lightweight and durable magnesium body, ergonomic secure handle, and interchangeable trigger for quick fire or single shot function. It's ideal for professional construction contractors and home DIY projects.
• Versatile and Powerful: The framing nailer features depth adjustment and a no mar tip, making it adaptable for different working surfaces. It's perfect for framing, and it can also be used to install subfloors, roof decking, wood fencing, and sheathing.Minimum Recommended Air Delivery SCFM @ 90PSI:2.4
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	will it take any brand of nails
Answer:	I have used two different brands so far. As long as the nails are plastic coated, 21 degree I believe any brand would work. The best prices I have found on nails is at harbor freight. 2500 nails for around $28. I have used 2 1/2" and 3 1/2"
Question:	How come just below the nailer specs they say "often bought with this product"....22 degree nails....not
Answer:	I used some of the 22 degree without a problem. I've used Bostich guns for 30 years prior to this gun & this is as good as any I've used.t's a great nailer
Question:	do the nails have to be plastic coated
Answer:	Plastic coated? No. But I do believe they have to be Plastic Collated, that is, they need to be bound together with plastic. I'm not sure if paper collated nails will work.
Question:	What kind of air compressor do you recommend for this nailer
Answer:	It really depends on how you're using it. If you're intermittently nailing with in and not imitating a machine gun- you can use a pancake or similar small compressor. The working pressure of the nailer is 70-115 PSI. I run mine at 100 PSI. Any portable compressor should be able to hit that pressure. The real question is duty cycle. If you're nailing every few seconds then you'll need a compressor capable of keeping up with the volume of air being consumed OR you'll have to slow down until your compressor stops running before firing the next nail. I run mine on 2 different compressors and don't have any issues- one is a 40 gallon shop compressor- the CFM is infinite compared to the gun. The other compressor is 2.6 CFM. I don't rapid fire when I'm using it and I can fire several nails before the compressor has to cycle. As long as you're not continuing to fire when the compressor is running you should be OK.

Product features

Numax 21º Full Head Framing Nailer

It's time to tackle a new project - and we have just the tool to get it done. The SFR2190 is perfect for framing, but did you know you can also use a framing nailer to install sub-floors, roof decking, wood fencing, sheathing, and more? We designed this nailer with you in mind, so it has all of the premium features you need to get started.

Step 1: Choose Firing Mode

Your framing nailer comes with a black single-fire trigger already assembled. This is the best choice if you haven't used a framing nailer before, or if you want accurate nail placement.

Follow the manual instructions to install the red bump-fire trigger if you want quick successive firing.

Step 2: Connect to Compressor

Set your compressor to 70 PSI and use the quick-connect fitting on your air hose to connect your framing nailer. If you have a really dense material, you can increase the pressure up to 115 PSI.

Put a few drops of oil into the fitting before connecting to a compressor to keep things running smoothly!

Step 3: Load Nails

Pull the side lever back along the magazine until it snaps into place.

Drop the nails into the open channel on the top of the magazine. The angle of the nails should match the angle of the nose of the nailer.

Lift the lever at the back of the magazine to release the side lever and secure the nails.

Step 4: Adjust and Go!

This nailer is loaded with features that let you customize for any project. Change the depth adjust, 360º air exhaust, or remove the no-mar tip for extra holding power.

Pro Tip: Use piece of scrap material to test out your nailer before starting on the real thing!

21º Plastic Collated Full-Head Framing Nails

A 'plastic collated nail' just means that the nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the SFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

Product description

The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8" to 2-1/8" which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
• Compatible with all DEWALT 20V MAX* batteries
• Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
• Tool-free selectable trigger for sequential or contact actuation modes
• Low nail lockout prevents dry firing and unwanted marks on the work material

User questions & answers

Question:	Is this a straight brad nailer for 5/8"-2" brads or an angled finish nailer 1-1/4 thru 2-1/2 finish nails
Answer:	THIS IS A STRAIGHT BRAD NAILER. 5/8" - 2".
Question:	Is this the same battery of 20v max drill
Answer:	Yes. To my knowledge all "20V Max" tools from DeWALT use the same battery. I have several tools and all the batteries work with all the tools.
Question:	Please confirm this kit includes the charging unit, battery and bag
Answer:	Mine came w/ those items since it is a kit & not tool only.
Question:	Can i nail 2x4 with this im building a garage
Answer:	Are you being serious? I really hope not! If you are, do not build anything! This gun is designed to fasten trim to walls like baseboard, casing etc. A "framing gun" is designed for "framing"... Dewalt has battery framing guns, they're about $100 more. But don't buy one. Call a pro, have them build your garage.

Product description

The MILWAUKEE M18 FUEL 18ga Brad Nailer delivers peak productivity at the jobsite, providing users with unmatched nailing performance without the hassle of a compressor and hose. Leveraging a nitrogen air spring mechanism, the finish nailer enables users to consistently sink nails to the proper depth in hard and soft woods while leaving clean nail holes matching the head of the nail. The combination of Milwaukee's POWERSTATE Brushless Motor and REDLINK PLUS Intelligence delivers users with unmatched fire rate with zero ramp-up time keeping them efficient throughout their day.

• This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box

User questions & answers

Question:	How many year warranty for this item
Answer:	I have been told the 5 year warranty does not apply if it comes in an unmarked box...which it says is the case in the description...along with it being refurbished
Question:	What length nails does it take
Answer:	Hello, 5/8 to 2-1/8 nails. Thanks
Question:	How wide is the dent in the wood around the nail when sinking below the surface
Answer:	If it is adjusted right, no dent
Question:	What are the recommended nails (size and other criteria) to use with this tool? I Milwaukee cust service this week and got no response
Answer:	Nail Gauge 18. Maximum Fastener Size : 2-1/8 in Minimum Fastener Size : 5/8 in

Product description

The DEWALT DCN650 15 Gauge Angled Finish Nailer drives 15 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, baseboards, and hardwood floor installation. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN650 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
• Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC628)
• Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
• Compatible with all DEWALT 20V MAX* batteries
• Tool-free selectable trigger for sequential or contact actuation modes

User questions & answers

Question:	Can you use this nail finisher for outside fencing? Or is it just for crown molding and trim
Answer:	6' Cedar privacy fence...no. But picket, or redwood (3.5" or 5.5" boards) where you want a clean finish...absolutely! Note, a 15-gauge is as small as you'd want to go where finish-nailers are concerned. To add strength to your nailed boards, shoot the nails in at slight, opposing angles--not straight in. This will provide a substantially stronger hold. Also, to maximize hold, adjust the nail depth so that the nail head sits flush with the board. Counter-sinking the nail too much will weaken the hold strength.
Question:	Tweeters and integrated subwoofer??? Might want to double check the description
Answer:	Yes, it does chirp nicely as you hammer away, but I don’t think it’s from tweeters.
Question:	how powerful are the subwolfers
Answer:	The wolves are super strong!
Question:	Will someone alert the seller to update their description? I seriously doubt this nailer has an integrated subwoofer
Answer:	Hahaha, integrated Bluetooth speakers in your finish nailer ... 🤔