8 best porter cable framing nailers

Product description

The Porter-Cable FR350B is a lightweight 3-1/2-Inch full round framing nailer with easy-to-use features. Weighing in at 7.3 pounds, this tool has the power to drive nails up to 3-1/2-inches by 0.131-inches into engineered lumber. A selectable trigger with trigger lockout allows for restrictive or contact actuation mode. Its tool-free adjustable depth and drive allow for proper setting of nail heads with ease. A low nail lockout indicates when users need to reload the tool. With an over-molded grip for comfort and control, this nailer is also ergonomically friendly. Its reversible rafter hook allows users to hang tools off the left or right side.



The FR350B uses full round head, plastic collated nails. The magazine is set at 22 degrees to the drive axis, which means that users need to use 22-degree plastic collated nails.



The FR350B does not come with a carrying case.

• Lightweight at just 7.3 pounds
• Power to drive nails up to 3-1/2-inch by 0.131-inch into engineered lumber
• Tool-free adjustable depth of drive for proper setting of nail heads
• Selectable trigger with trigger lockout for restrictive or contact actuation mode
• Does not come with carrying case

User questions & answers

Question:	Well this work with a 2 1/2 inch nail
Answer:	Good morning and thank you for emailing us about the nailer. This can use 3/4 in. to 1-3/4 in. Thank you and have a great day!
Question:	Anyone able to recommend a good small compressor to go with this? I'm fitting out a new home shop, I want to be sure I have enough air capacity
Answer:	The RoofPro 445XP (item number 8V0001N) is manufactured in Taiwan.
Question:	What are the nail specs for this nailer
Answer:	There is NO hard case made for this exact nail gun. TTI Group or Ridgid only made the clothe carrying case for this nail gun. I pray that this has been helpful. God Bless.
Question:	What's the difference between the FR350A and FR350B
Answer:	THE ONLY ONE I KNOW IS BOSTITCH FOR RN46

Product description

Sfr2190 features: -Framing nailer. -360° adjustable exhaust. -Finger depth adjustment. -Ergonomically designed comfort grip. Type of nailer: -Framing nailers. Type of fastener: -Framing nails. Generic dimensions: -20.75'' h x 15'' w x 5.75'' d. Dimensions: Overall height - top to bottom: -20.75 inches. Overall width - side to side: -15 inches. Overall product weight: -8.5 pounds.

• Nailed It: This 21 degree pneumatic framing nailer features a lightweight and durable magnesium body, ergonomic secure handle, and interchangeable trigger for quick fire or single shot function. It's ideal for professional construction contractors and home DIY projects.
• Versatile and Powerful: The framing nailer features depth adjustment and a no mar tip, making it adaptable for different working surfaces. It's perfect for framing, and it can also be used to install subfloors, roof decking, wood fencing, and sheathing.Minimum Recommended Air Delivery SCFM @ 90PSI:2.4
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	will it take any brand of nails
Answer:	I have used two different brands so far. As long as the nails are plastic coated, 21 degree I believe any brand would work. The best prices I have found on nails is at harbor freight. 2500 nails for around $28. I have used 2 1/2" and 3 1/2"
Question:	How come just below the nailer specs they say "often bought with this product"....22 degree nails....not
Answer:	I used some of the 22 degree without a problem. I've used Bostich guns for 30 years prior to this gun & this is as good as any I've used.t's a great nailer
Question:	do the nails have to be plastic coated
Answer:	Plastic coated? No. But I do believe they have to be Plastic Collated, that is, they need to be bound together with plastic. I'm not sure if paper collated nails will work.
Question:	What kind of air compressor do you recommend for this nailer
Answer:	It really depends on how you're using it. If you're intermittently nailing with in and not imitating a machine gun- you can use a pancake or similar small compressor. The working pressure of the nailer is 70-115 PSI. I run mine at 100 PSI. Any portable compressor should be able to hit that pressure. The real question is duty cycle. If you're nailing every few seconds then you'll need a compressor capable of keeping up with the volume of air being consumed OR you'll have to slow down until your compressor stops running before firing the next nail. I run mine on 2 different compressors and don't have any issues- one is a 40 gallon shop compressor- the CFM is infinite compared to the gun. The other compressor is 2.6 CFM. I don't rapid fire when I'm using it and I can fire several nails before the compressor has to cycle. As long as you're not continuing to fire when the compressor is running you should be OK.

Product features

Numax 21º Full Head Framing Nailer

It's time to tackle a new project - and we have just the tool to get it done. The SFR2190 is perfect for framing, but did you know you can also use a framing nailer to install sub-floors, roof decking, wood fencing, sheathing, and more? We designed this nailer with you in mind, so it has all of the premium features you need to get started.

Step 1: Choose Firing Mode

Your framing nailer comes with a black single-fire trigger already assembled. This is the best choice if you haven't used a framing nailer before, or if you want accurate nail placement.

Follow the manual instructions to install the red bump-fire trigger if you want quick successive firing.

Step 2: Connect to Compressor

Set your compressor to 70 PSI and use the quick-connect fitting on your air hose to connect your framing nailer. If you have a really dense material, you can increase the pressure up to 115 PSI.

Put a few drops of oil into the fitting before connecting to a compressor to keep things running smoothly!

Step 3: Load Nails

Pull the side lever back along the magazine until it snaps into place.

Drop the nails into the open channel on the top of the magazine. The angle of the nails should match the angle of the nose of the nailer.

Lift the lever at the back of the magazine to release the side lever and secure the nails.

Step 4: Adjust and Go!

This nailer is loaded with features that let you customize for any project. Change the depth adjust, 360º air exhaust, or remove the no-mar tip for extra holding power.

Pro Tip: Use piece of scrap material to test out your nailer before starting on the real thing!

21º Plastic Collated Full-Head Framing Nails

A 'plastic collated nail' just means that the nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the SFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

Product description

PORTER-CABLE PCC792LA 20V MAX Cordless Lithium 16GA Straight Finish Nailer Kit is driven by 100% battery power, which eliminates need for a compressor, hose or costly gas cartridges. The motor design provides consistent firing power into various materials (baseboard, crown moldings, cabinet assembly) and assorted climate conditions. This 16GA Straight Finish Nailer has a fastener length capacity of 1" to 2-1/2" and a magazine capacity of 100 nails. It also features multiple tool free settings that provide increased productivity and user safety and it has multi functional dual LED lights function for workspace illumination and error indication. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions. Backed by PORTER-CABLE'S 3-Year Limited Warranty. Kit includes: PCC792 Nailer, PCC680L Battery, PCC691L Charger.

• 100% battery power: Eliminates need for a compressor, hose or costly gas cartridges
• Multiple Tool Free Settings: provide increased productivity and user safety
• Motor design: provides consistent firing power into various materials and climate conditions
• Multiple tool free settings: Provides increased productivity and user safety
• Fastener length capacity of 1" to 2-1/2" and a magazine capacity of 100 nails

User questions & answers

Question:	where can you find extra batteries
Answer:	The short answer is extra batteries should be available from the place you got the tool. The longer response would be Amazon or big retailers such as Lowes and Home Depot.
Question:	I'm installing pine flooring (softer wood) will this tool get the job done
Answer:	yes you can set the impact for thickness and hardness of wood
Question:	Is it more powerful than the Arrow 200 Electric brad nailer? And does the battery charger have trickle charging
Answer:	I have had 2 different electric nailers. Also have had and still use two 18 volt 18 gauge nailers. One is a combo brad/staple nailer. I must say this 16 gauge Porter-Cable is the most powerful nailer I own. It does have a trickle charge as well. This a GREAT nailer.
Question:	Is there a roofing nail available with this gun
Answer:	No, it uses 16 gauge brads only. You would need a specific roofing nail gun.

Product description

PORTER-CABLE PCC792B 20V MAX Cordless Lithium 16GA Straight Finish Nailer Bare tool is driven by 100% battery power, which eliminates need for a compressor, hose or costly gas cartridges (Battery sold separately). The motor design provides consistent firing power into various materials (baseboard, crown moldings, cabinet assembly) and assorted climate conditions. This 16GA Straight Finish Nailer has a fastener length capacity of 1” to 2-1/2” and a magazine capacity of 100 nails. It also features multiple tool free settings that provide increased productivity and user safety, and it has multi functional dual LED lights function for workspace illumination and error indication. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions. Backed by PORTER-CABLE'S 3-Year Limited Warranty. *This is a bare tool item/battery sold separately. Includes: PCC792 Nailer.

• Multiple Tool Free Settings: provide increased productivity and user safety
• Motor design: provides consistent firing power into various materials and climate conditions
• Multiple tool free settings: Provides increased productivity and user safety
• Fastener length capacity of 1" to 2-1/2" and a magazine capacity of 100 nails
• Battery sold separately

User questions & answers

Question:	How do you adjust the pressue
Answer:	I think the answer is in your question. You definitely want a dimmer that's LED compatible
Question:	Is this nailer compatible with the pcc681l battery (1.3a 20v black battery
Answer:	I don't know what it is made of but no different from my other 4 ceiling fans. Mine doesn't stink. I love this fan.
Question:	will it work with 16 gage brad nails
Answer:	I assume you mean when the LED stops working. :-) The LED really is not replaceable So if you wanted to continue having a light you would need to replace the entire fan. Having said that, the LED light should last for 10 to 20 years before that happens
Question:	Can i use 18ga nails on this too or just 16ga
Answer:	Yes. We have two of this fan and both are mounted on angled ceilings with about a 45° pitch. I believe it requires an adapter which costs no more than $10-15 at any Lowe’s or Home Depot, but regardless we have two of the same fan successfully mounted on angled ceilings.

Product description

The product is RND Head Framing Nailer. Easy to use. The product is manufactured in China. Magazine Loading - Bottom Load

The Bostitch F21PL Round-Head Framing Nailer is the ideal tool for framing, sheathing, subflooring, and bracing jobs. Perfect for professionals and weekend warriors alike, this nailer features a strong, lightweight magnesium body, quick-change nosepieces for plastic-collated and metal-connector nails, a 16-inch layout indicator, and more.

Designed to Match the Task at Hand

The recommended tool for use with HurriQuake disaster-resistant nails, the F21Pl has a patented feature that lets you set nail depth with the simple push of a button. For further convenience, quick-change nosepieces let you switch from plastic-collated framing nails to metal connector nails in seconds.

The high-capacity magazine holds up to 60 plastic collated 21-degree framing nails (2.0-3.5 inch) or 60 metal connector nails (1.5-2.5 inch). Its 16-inch layout indicator, located on the magazine, lets you know at a glance the correct distance between studs.

And with an adjustable rafter hook, you can conveniently hang the nailer on joists and rafters during work breaks.

Best-in-Class Power-to-Weight Ratio

The magnesium construction of the F21PL Round-Head Framing Nailer means this tool is light enough to use all day, while still being strong enough to reliably use again and again. It also means that this tool has the best power-to-weight ratio in its class: 1,050 in./lbs. to 8.1 pounds.

The Bostitch F21PL Round Head Framing Nailer works with a standard air compressor and is backed by a seven-year limited warranty.

About Bostitch

Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box

Framing nailer and two quick-change nosepieces.

From the Manufacturer

Magnesium plastic collated framing nailer / metal connector nailer. This new framing nailer drives 1-1/2- to 3-1/2-inch framing nails and comes with an interchangeable tip for placing nails accurately for metal connector applications. You get the benefit of two tools in one, no other competitive framer can match that. This light weight tool is also one of the most powerful framers with 1050 in./lbs. of driving power. It is able to tackle even tough engineered lumber applications. Tool also includes bolt on steel wear guards with integrated rubber skid pads, and printed magazine with scale and 16-inches-on-center layout feature. New smart trigger works as a sequential and bump fire trigger base on how you actuate the tool.

• Compressor/Air Tool Features: Fastener Collation,Fastener Depth Control, 1 1/2 inch to 3 1/2 inch framing nailer; 1,050 inch pounds of driving power; sequential and bump trigger
• 2 nailers in one: includes 2 quick change nose pieces, converts to framing or metal connector applications
• Lightweight magnesium housing; integrated rubber skid pads; rubber grip
• Includes 1 framing nailer; Power Source: Pneumatic
• 14 1/4 by 20 1/2 inches; 8.1 pounds.Operating Pressure:80 120 psi
• 1 1/2 inch to 3 1/2 inch framing nailer; 1,050 inch pounds of driving power; sequential and bump trigger
• 2 nailers in one: includes two quick change nosepieces, converts to framing or metal connector applications

User questions & answers

Question:	Is it true that the hammer is only "positive placement" for nails up to 2.5" long
Answer:	Yes, pp tip for nails up to 2.5" in length. Framing tip for up to 3.5"
Question:	How is it powered? Is it pneumatic or battery operated and/or use compressed gas cylinders
Answer:	It is pneumatic. I've been using a 6 gal Campbell Hausfeld compressor with 1/4" quick disconnects at about 90 - 100 psi for metal connectors and 16d nails and have never run out of air. I bought it mainly for the metal connector ability, which it does great, but is also great for down to 6d nails. Just turn down the pressure on the smaller nails.
Question:	Is it difficult to find nails for this hammer
Answer:	Metal connector nails need to be larger around to fit properly in the holes and have the shear strength. If the nail is longer than 2-1/2 inches the gun will not fire by design. I can only find the 1-1/2 21 degree nails on Amazon and Home Depot online. They are expensive, but surprisingly, I tried some 33 degree 1-1/2 inch nails in this gun and it fires normal. I don't see any wear as a result either. I would not try this with longer 33 degree nails because they would angle out of reach of the driver. The gun out performs my old Senco SN60 by a large margin, is lighter, but about an inch taller.
Question:	What is the difference between a round head and a clipped head nailer
Answer:	The round head is the traditional type nail you would find in a box or bin of nails. The clipped head is the round head clipped off to the width of the nail shank on two sides--does not had the holding power of the round head.

Product features

BOSTITCH F21PL

This 21-degree Plastic Collated Framing Nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a push button.

Features:

• Two nailers in one: includes two quick change nosepieces to convert tool to either framing or metal connector applications
• Patented push button adjustable depth guide sets nails to desired depths
• Lightweight magnesium design for durability
• Adjustable rafter hook allows users to hang tool on rafters and joists

Product description

The Porter-Cable BN200C 18GA 2-Inch Brad Nailer Kit has a magnesium body that delivers both a strong and lightweight design. The brad nailer features a removable non-marring nose tip with on tool storage as well as an integrated rubber grip for improved comfort. The BN200C is equipped with a low nail reload indicator to help alert when to reload and has a special hardened driver blade for longer life. The BN200C kit includes : Nailer, ¼” fitting, carrying case and owners manual.

• Long life maintenance-free motor to keep from staining the work surface
• Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
• Tool-free jam release mechanism for easy nail removal
• Rear exhaust to keep contaminates away from work
• Drives 18 gauge nails from 5/8-Inch to 2-Inch length

User questions & answers

Question:	Does this gun shoot staples as well? If so what size staples
Answer:	It has a D-ring at the top of the clip, my turnout coat has a clip that I clip it to.
Question:	Will Bostich brads work in this gun
Answer:	Says Engineered in the USA, Made in China on the box...... I didn't know that either till I just looked at the box. Kind of disappointing.
Question:	what size brads come with it
Answer:	Can be charged by either one.
Question:	Does this nailer also use finishing nails? And does it countersink the brads and nais? Thank You One more thing. Is it better to use 16 GA? or stay with 18? Building small projects like bird houses. Thanks again. Never used a nailer before. Old school. Use nail sets and the like. Ooops There goes my age. HA HA HA Tha
Answer:	Can be purchased with USB charger and 1 battery or with piggy back charger with 2 batteries.

Product description

The Freeman PFR2190 pneumatic 21 degree 3-1/2" Full Round Head framing Nailer with case is ideal for projects such as framing, subfloors, roof decking, pallet and shipping crate assembly, and fencing. This versatile air powered tool is compatible with 10-12 gauge plastic collated 21 degree full Round Head framing nails from 2" To 3-1/2", and a dual mode trigger allows the option of either bump or sequential firing. This nail gun features a 360 degree adjustable exhaust to keep air out of your face, an anti-dry-fire design to extend the life of the tool, an anodized aluminum magazine and cylinder for increased durability, and a tool-free depth adjust for various applications. The body of this framing Nailer is constructed of magnesium to reduce weight, making it easier to use for long stretches of time. The removable no mar tip prevents damage to your working surface. A blow molded carrying case is included, along with safety Goggles, air tool oil, and adjustment tools. The pneumatic 21 degree 3-1/2" Full Round Head framing Nailer with case will increase productivity For Dyers at home as well as professional contractors at the job site.

• Nailed it: This 21 degree Pneumatic framing nailer features a lightweight and durable magnesium body, ergonomic secure handle, and interchangeable trigger for quick fire or single shot function. It's ideal for professional contractors and home DIY projects.
• Versatile and powerful: the framing nailer features tool-free finger depth adjustment and a no mar tip, making it adaptable for different working surfaces. It's perfect for framing, wall sheathing, siding installation, subfloors, pallet building, wood box assembly, and fencing.
• The right tool for the job: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.Operating Pressure: 70 – 115 PSI
• Tough and dependable: we make an array of durable construction Tools and Accessories, including staplers and nailers For siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, BOSTITCH, Senco, Paslode, and DEWALT.

User questions & answers

Question:	The listing states nail length, not diameter. IS the rack designed for .148" nails
Answer:	No, the range of nail diameter is .113-.131.
Question:	Does the Freeman 2190 have a spike tip for better toenailing
Answer:	Yes it does have the spike tip. The rubber protector just pops off when you remove the compression clamp.. I've used this gun for 5 months or so and am really happy with its performance so far..
Question:	Does nailer alone really weigh 14.5 lbs
Answer:	Hi Craig . . . the nailer weighs less than 10 lbs, the 14.5 must be the gross weight of the nailer within its' somewhat rugged plastic case. . . I can't say enough about the nailer, it's my 2nd Freeman product. . . they offer a great value!
Question:	will this work with a 6 gal pancake compressor with a cfm of 2.6, used lightly to build a shed
Answer:	The air compressor must be able to maintain a minimum of 70 psi during operation, with an operating range of 70-115 psi, not to exceed 120 psi.

Product features

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

Product description

The PORTER-CABLE PCC790LA 20V MAX Lithium 18GA Brad Nailer Kit is 100% battery powered which eliminates need for compressor, hose or costly gas cartridges. The special motor design provides consistent firing power into various materials and climate conditions. This nailer features multiple tool free settings to provide increased productivity and user safety. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions reducing user fatigue. It also offers multi functional dual LED lights to light up your workspace, and indicate errors. Fastener length capacity of 5/8" - 2", magazine capacity of 100, with sequential firing mode and trigger lock. Includes Battery, and Charger.

• NO COMPRESSOR NEEDED: This cordless brad nailer is battery powered, eliminating the need for a compressor, hose, or expensive gas cartridges.
• CONSISTENT DRIVING DEPTH: Our depth adjustment wheel allows you to properly countersink nails consistently. Nail Diameter: 18 gauge
• INCREASED PRODUCTIVITY: A tool free release lever, jam release, and depth adjustment wheel make your life easier.
• BETTER RUNTIME: Included 1.5 Ah 20Volt MAX Lithium ion battery lasts longer than NiCad, charger included. Integrated Belt Hook: Yes
• 3 YEAR LIMITED WARRANTY: PORTER CABLE will repair, without charge, any defects due to faulty materials or workmanship for 3 years from the date of purchase.

User questions & answers

Question:	Does this come with a charger
Answer:	This one does come with a battery & charger, but they sell a model without a charger
Question:	Would this tool work to repair my fence
Answer:	Sure it can repair your fence and build you new fences too I use it every day for at least two hours . Great tool I have not use my compressor from I bought this tool. But do not use the nailer alone use screws too.
Question:	Will it go through 1" oak trim
Answer:	yes
Question:	can i use multiple lengths of nails
Answer:	5/8 inch through 2 inch nails....awesome gun...i am so happy with it