14 best milwaukee brad nailers

Product description

The MILWAUKEE M18 FUEL 18ga Brad Nailer delivers peak productivity at the jobsite, providing users with unmatched nailing performance without the hassle of a compressor and hose. Leveraging a nitrogen air spring mechanism, the finish nailer enables users to consistently sink nails to the proper depth in hard and soft woods while leaving clean nail holes matching the head of the nail. The combination of Milwaukee's POWERSTATE Brushless Motor and REDLINK PLUS Intelligence delivers users with unmatched fire rate with zero ramp-up time keeping them efficient throughout their day.

• This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box

User questions & answers

Question:	How many year warranty for this item
Answer:	I have been told the 5 year warranty does not apply if it comes in an unmarked box...which it says is the case in the description...along with it being refurbished
Question:	What length nails does it take
Answer:	Hello, 5/8 to 2-1/8 nails. Thanks
Question:	How wide is the dent in the wood around the nail when sinking below the surface
Answer:	If it is adjusted right, no dent
Question:	What are the recommended nails (size and other criteria) to use with this tool? I Milwaukee cust service this week and got no response
Answer:	Nail Gauge 18. Maximum Fastener Size : 2-1/8 in Minimum Fastener Size : 5/8 in

Product description

The M18 FUEL 18 Ga. 1/4 in. Narrow Crown Stapler delivers peak productivity on your job site, providing you with unmatched stapling performance without the hassle of a compressor and hose. We've leveraged our nitrogen air spring mechanism, to give the Narrow Crown Stapler the power to consistently sink staples to the proper depth in hard materials. This cordless stapler also has tool-free depth adjustment to drive staples in soft materials without blowing through. You can choose from sequential and contact actuation firing modes to meet your application's needs. The combination of our POWERSTATE Brushless Motor and REDLINK PLUS Intelligence provides you with a staple gun that delivers an unmatched fire rate with zero ramp-up time. This battery powered narrow crown stapler is compact and lightweight, giving you better access into tight spaces and limiting your fatigue throughout the day. The MILWAUKEE M18 FUEL 18 Ga. 1/4 in. Narrow Crown Stapler delivers the pneumatic performance that professional carpenters and remodelers expect with the freedom and convenience of a cordless tool. The tool includes two Work Contact Tips and a Reversible Belt Hook. Delivers consistent, Clean Staple setting, with the power to drive into hard materials and adjustability for soft materials No Gas cartridge required 2 work contact tips included Reversible belt hook included ON/OFF power button Includes: M18 FUEL 18 Ga. 1/4 in. Narrow Crown Stapler - 2749-20, Contact Work Tips, Reversible Belt Hook,Battery and charger sold separately.

• Compact size, light weight with zero ramp-up time
• Fully compatible with the M18 system, featuring over 200+ tools
• Tool free drive depth adjustment
• Sequential and contact actuation firing modes
• Dry fire lockout

User questions & answers

Question:	Has anyone tried this with insulated staples? Like for stapling 12/2 romex
Answer:	there would be no way i can see that you could load an insulated staple in this tool. It just shoots a narrow crown 1/4 inch wide staple.
Question:	what staplers will work with it
Answer:	3/8" to 1 1/2" length 1/4" crown 18 ga
Question:	Will it work for t1-11 siding
Answer:	18 Gauge staples probably would not hold the T1 11 on
Question:	Will this shoot through thin gauge sheet metal
Answer:	Yes

Product description

This CRAFTSMAN V20 MAX 18GA cordless finish nailer's cordless design eliminates the need for compressors, hoses, or costly Gas cartridges. The motor delivers consistent power firing in various weather conditions and materials. The extensive runtime on a single battery and Fast shot speed allow for less downtime on the jobsite. The single tool-free depth setting makes adjusting your nail depth quick and simple, while the other tool-free settings make potential nail jams or stalls easy to fix. The cordless finish nailer is lightweight and well balanced, making this product very comfortable to use for prolonged time.

• CRAFTSMAN V20 MAX cordless nailer drives adhesive collated 18 gauge finish nails
• Fully cordless design eliminates the need for compressors, hoses or costly Gas cartridges
• Provides consistent firing power in various climate conditions and materials
• Tool-free depth settings for quick set up and consistent results
• Tool free jam and stall settings for ease of use and improved efficiency
• Lightweight with optimal center of gravity provide optimal balance and comfort in hand during use
• Contoured overmolded handle for added comfort during use

User questions & answers

Question:	Will DeWalt battery work
Answer:	No, the CMCN618C1 should only be used with the CRAFTSMAN battery.
Question:	Can this be used to attach wall panel to an old shipping pallet? I'm building a bar. Thanks
Answer:	Absolutely yes! I use this one every single day for my projects, shiplap, pallets, plywood, crown molding, etc. just be sure to get the right nail size and go ahead!!
Question:	Can this tool work with the Black and Decker 20 volt battery for the Matrix system
Answer:	No. The batteries for DeWalt, Black & Decker, Porter Cable, and Craftsman do not cross brands and are not compatible.
Question:	Does this unit come with a battery and charger
Answer:	Yes, The CMCN618C1 comes with one battery and one charger.

Product description

The PORTER-CABLE PCC790LA 20V MAX Lithium 18GA Brad Nailer Kit is 100% battery powered which eliminates need for compressor, hose or costly gas cartridges. The special motor design provides consistent firing power into various materials and climate conditions. This nailer features multiple tool free settings to provide increased productivity and user safety. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions reducing user fatigue. It also offers multi functional dual LED lights to light up your workspace, and indicate errors. Fastener length capacity of 5/8" - 2", magazine capacity of 100, with sequential firing mode and trigger lock. Includes Battery, and Charger.

• NO COMPRESSOR NEEDED: This cordless brad nailer is battery powered, eliminating the need for a compressor, hose, or expensive gas cartridges.
• CONSISTENT DRIVING DEPTH: Our depth adjustment wheel allows you to properly countersink nails consistently. Nail Diameter: 18 gauge
• INCREASED PRODUCTIVITY: A tool free release lever, jam release, and depth adjustment wheel make your life easier.
• BETTER RUNTIME: Included 1.5 Ah 20Volt MAX Lithium ion battery lasts longer than NiCad, charger included. Integrated Belt Hook: Yes
• 3 YEAR LIMITED WARRANTY: PORTER CABLE will repair, without charge, any defects due to faulty materials or workmanship for 3 years from the date of purchase.

User questions & answers

Question:	Does this come with a charger
Answer:	This one does come with a battery & charger, but they sell a model without a charger
Question:	Would this tool work to repair my fence
Answer:	Sure it can repair your fence and build you new fences too I use it every day for at least two hours . Great tool I have not use my compressor from I bought this tool. But do not use the nailer alone use screws too.
Question:	Will it go through 1" oak trim
Answer:	yes
Question:	can i use multiple lengths of nails
Answer:	5/8 inch through 2 inch nails....awesome gun...i am so happy with it

Product description

GRR-RIPPER 3D Push Block is a must-have for any table saw user. A true MICROJIG Innovation. Essential Protection It's essential for superior precision, control and safety on your table saw and other major woodworking machinery. Protect your hands like never before, virtually eliminate kickback with unmatched control, and guide and rip with surgical precision. Extreme Control The powerful green grr-rip gives you a commanding hold over the work piece for total control. GRR-RIPPER has three legs to give you three-directions of control on the keeper and off-cut work piece. It provides downward pressure to virtually eliminate kickback, inward pressure to keep the stock against the fence, and forward pressure to prevent burning. Unmatched Precision Stabilize your cut with the built-in Balance Support to square your cut and safely handle the smallest parts of wood when cutting on the table saw or router table. Rip as accurate as a 1/4" Standard without readjusting the fence. Fully Adjustable The adjustable Center Leg accommodates for a variety of different sizes and widths of material while the grip secures a virtually unlimited variety of woods, solid surfaces, aluminum or even plastic. GRR-RIPPER handle can be angled and adjusted for your comfort and control. Total Versatility GRR-RIPPER videos feature over 30 unique uses on the table saw, router table, jointer, and band saws. The powerful hold, extreme accuracy, and versatile adjustability will help you maximize your materials and greatly improve your protection against dangerous accidents. Trusted Everywhere Over 400, 000 GRR-RIPPERs sold worldwide. Join the smartest woodworkers worldwide. MICROJIG is a true innovator and founded by woodworker, Henry Wang, in his home garage. MICROJIG has now sold over 1 Million Products in over 20 Countries! GRR-RIPPER - Don’t Use a Table Saw Without It. Work Safer. Work Smarter. Made in the USA. 100% Satisfaction. Extended 3-Year . Watch the action video and add to your cart today! Using two GRR-RIPPERs allows you to feed long stock continuously without stopping, virtually eliminating burning and blade marks caused by inconsistent feed rate. Parts come off the saw ready to use with little to no additional sanding or planing.

• Protect hands and prevent kickback like never before
• Powerful high-friction durable grip for extreme hold
• Precision cutting and control down to 1/4" Ripping
• Fully adjustable for easy handling
• Work with small stock safely on the table saw, Router table, Jointer, & Band saw
• Made in USA. A true MICROJIG Innovation.
• Extended 3-Year . 100% Satisfaction .

User questions & answers

Question:	How hard is it to level the jig when adjusting the side support
Answer:	The bit is capable of being set to the depth of 1/4. I have never personally made a dovetail this small though because I used the jig only a few times and I only worked with soft woods. I believe if hardwoods were being used 1/4 would be adequate depth.
Question:	I looked at the videos. Am I correct in assuming that you have to remove the blade guard in order to use this
Answer:	I believe the bit is a 3/8 dovetail bit. I bought mine when I bought the jig. I would look up the jig on amazon and go to the "people who bought this item often buy..." I think that's how I got mine. Hope this helps.
Question:	What is the absolute minimum thickness the jig will cut? I need to rip 1/4" strips
Answer:	Yes, you can make box joints with the 4210.
Question:	What is the difference between the gr 100 and the gr 200by model and is it worth the price difference
Answer:	I believe it's a 1/2" shank but I'm not absolutely sure. It's in my shop up in CT and I'm in NYC at the moment, so I can't check it. I'll check this weekend and send confirmation. But your router should be able to handle 1/4", 3/8" and 1/2" shanks with different collets.

Product features

Three directions of force gives you superior precision, control and safety.

1. Downward Virtually eliminates kickback.

2. Inward Keeps stock firmly against the fence .

3. Forward Controls and feeds both sides of the stock for cleaner cuts.

Unbelievable gripping power with Green-GRIP.

Green-GRIP is the proprietary non-slip material that gives you superior gripping power over workpieces and materials such as oak, cherry, walnut, ebony, pine, poplar, maple, plastics and aluminum. Treaded grooves provide increased traction on the workpiece even with sawdust. Easily cleaned with denatured or rubbing alcohol. No other push block’s grip comes close.

Virtually eliminates kickback on table saws.

The GRR-RIPPER’s unique design provides downward force, controlling the keeper and off cut workpiece. This prevents the workpiece from lifting up off the table top – virtually eliminating kickback. Inward Pressure keeps the workpiece guiding along the fence preventing it from catching the rear-rising teeth. This gives you a smoother, cleaner, and safer cut. Work safer.

Versatility – table saws, bandsaws, router tables, jointers, and more.

Rip long stock on the table saw by using two GRR-RIPPERs with the hand-over-hand or leapfrog technique.

Versatility – table saws, bandsaws, router tables, jointers, and more.

Use the GRR-RIPPER in the vertical position to resaw or veneer cuts firmly against the fence to prevent bandsaw drift and ensure a straight cut from beginning to end.

Versatility – table saws, bandsaws, router tables, jointers, and more.

Control your workpiece when freehand routing on your router table.

Versatility – table saws, bandsaws, router tables, jointers, and more.

For proper and safe face jointing, you need technique, and reliable heavy-duty holding power. Strengthen your operation with our Green-GRIP non-slip material.

GR-100 includes the following

GRR-RIPPER GR-100: Handle, Main Body, 3 Legs with Green GRR-RIP, Balance Support, Hardware.

Product description

The M18 FUEL 16-Gauge Straight Finish Nailer brings the best of the best to your worksite, combining the comfort, control and efficiency of a pneumatic gun with unmatched driving power, speed and accuracy of both nail placement and drive depth. Delivering on the promise of peak productivity and far less hassle and cost of ownership the M18 FUEL 16-Gauge Straight Finish Nailer operates from the revolutionary REDLITHIUM Battery for unbeatable power and run-time, eliminating the mess and maintenance of gas cartridges. Using the exceptional application speed, torque and durability of our compact POWERSTATE Brushless Motor, plus our Ready to Fire technology, this tool is capable of fully sinking 2-1/2 in. nails into solid oak with zero ramp-up time.

• Brand New in box. The product ships with all relevant accessories

User questions & answers

Question:	The picture shows a battery. Is the battery included? Is the charger included
Answer:	Battery and charger were both included with mine.
Question:	Does this include the battery , charger and bag
Answer:	Yes. 2.0A Battery, with Charger. Nice soft bag too.
Question:	The description says this is an angled finish nailer but the picture shows it is a straight finish nailer. Is this an angled or straight finish nailer
Answer:	It is a straight finish nailer. The person who created this product listing used the wrong picture. Amazon won't let me change it.
Question:	Does this nailer also do staples
Answer:	It is a NAILer...

Product description

The 2767-20 M18 FUEL High Torque 1/2 inch Impact Wrench with Friction Ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000 ft-lbs of fastening torque and 1400 ft-lbs of nut-busting torque. With 2X faster removal speed, users will be able to get the job done faster and be more productive throughout their day. By providing the industry’s most compact cordless High Torque Impact Wrench at 8.39 inches length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL with Bolt Removal mode gives users the most control over their fasteners. Bolt Removal mode gives the user more control when removing fasteners by slowing to 750rpm once the fastener has been busted loose. This tool offers quick, tool-free socket changes with a 1/2 inch friction ring anvil. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.

• Provides maximum productivity by removing stubborn and high torque fasteners up to 2X faster than the competition
• Most compact cordless High Torque Impact Wrench in its class at 8.39" in length
• Industry leading 4-mode drive control with bolt removal mode, allowing for ultimate control.
• REDLINK PLUS intelligence prevents damage to the tool and battery due to overloading or overheating
• REDLITHIUM batteries deliver more work per charge and more work over the life of the battery
• Features a friction ring design to ensure quick and easy socket changes
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• LED light to illuminate the work area

User questions & answers

Question:	If i purchase this through amazon, is the milwaukee 5 year warranty still honored? i read that amazon is not an authorized milwaukee retailer
Answer:	Milwaukee’s 5 year warranty is from the purchase date (from a valid retailer) or from the date code on the tool if you don’t have a proof of purchase from a valid/approved retailer. I’ve had warranty repairs under both circumstances.
Question:	What is max torque
Answer:	On a full battery it has 1,000 ft lbs of forward torque and 1,400 ft lbs of reverse torque. Thanks Jim
Question:	Is this truly at 2767- 22? Gen 2 1400 ft lbs? because the description does not match what it should be if that is the part number
Answer:	It is. the 2767-22 is just a combo kit that comes with two batterys and a charger. it is the beast.
Question:	The description says it has 1000 ft lbs of torgue. The spec page says 750 in lbs. Which is it
Answer:	1000 lbs-ft fastening. 1400 lbs-ft breaking. and slows to 750rpm when nut is loose.

Product features

Milwaukee 2767-20 M18 Fuel High Torque

The 2767 M18 Fuel 1/2" High Torque Impact Wrench with Friction Ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000 ft-lbs of fastening torque and 1400 ft-lbs of nut-busting torque. With 2X faster removal speed, users will be able to get the job done faster and be more productive throughout their day.

4-Mode Drive Control with Bolt Removal mode gives users the most control over their fasteners. Bolt Removal mode gives the user more control when removing fasteners by slowing to 750rpm once the fastener has been busted loose.

This tool offers quick, tool-free socket changes with a 1/2 in. friction ring anvil. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.

Product description

The Milwaukee M12 3/8” Crown Stapler delivers a true hand tool replacement. It is designed to drive a range of 3/8” flat crown staples (1/4”-9/16”) through an array of materials and substrates. This unit is compatible with all Milwaukee M12 batteries, and carries Milwaukee’s 5-year limited power tool warranty.Compact DesignThe crown stapler features 7.25” long and 3-pound weighted design that allows for great access into tight spaces. With an adjustable belt hook, it gives you convenient tool belt portability. The compact and ergonomic design with an easy to squeeze trigger design significantly reduces fatigue associated with traditional hand staplers. Easy-to-Use DesignFeaturing a slotted magazine design for easy staple viewing, this stapler allows up to 1500 staples per charge on a M12 REDLITHIUM 1.5ah battery. The integrated sequential and contact actuation trigger design provides increased productivity and seamless changing between firing modes. The dry fire lockout prevents unintended damage to the work surface. The stapler includes a staple leg locating arrow allows for accurate staple placement. The crown stapler features a power adjustment dial for consistent flush stapling through various materials.

• COMPATIBILITY: It is designed to drive a range of 3/8” flat crown staples (1/4”-9/16”) through an array of materials and substrates
• COMPACT DESIGN: The crown stapler features 7.25” long and 3-pound weighted design that allows for great access into tight spaces. The compact and ergonomic design with an easy to squeeze trigger design significantly reduces fatigue associated with traditional hand staplers
• CAPACITY: Featuring a slotted magazine design for easy staple viewing, this stapler allows up to 1500 staples per charge on a M12 REDLITHIUM 1.5ah battery
• INCREASED PRODUCTIVITY: The integrated sequential and contact actuation trigger design provides increased productivity and seamless changing between firing modes
• STAPLE LEG LOCATING ARROW: The stapler includes a staple leg locating arrow allows for accurate staple placement

User questions & answers

Question:	How well does it work with fiberglass insulation installation
Answer:	Don't worry at all, the surface of this product is made of stainless steel, so it is not easy to rust!
Question:	Will this work on staples 9/16" on doing garage opener wire
Answer:	-the staple remover is not the problem, no it doesnt. But the gun keeps jamming up on me. wouldnt reccomend it.
Question:	Will the milwaukee 2447-20 m12 3/8” crown stapler work effectively in stapling a 16 gauge black vinyl coated welded wire to our1x6 pine boards
Answer:	For our staplers, the available lengths of doors and straight staples are 4-14 mm and 10-14 mm respectively, and the U-shaped range is 10-12 mm
Question:	Can this be used on ductboard construction
Answer:	depending on the hardness of the surface. Pine boards - the staples sink right in. Oak boards - then not so much; Hope my suggestions are useful to you.

Product description

The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8 in. to 2-1/8 in. which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
• Brushless motor maximizes runtime and durability
• Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC608)
• Tool-free depth adjustment for precise countersinking of nails
• Tool-free jam release to quickly and easily clear nail jams

User questions & answers

Question:	Where do I get the end tips at
Answer:	That no-mar tip, as it's called, is no longer available. https://www.ereplacementparts.com/dewalt-dcn680b-type-20v-18ga-brad-nailer-parts-c-1009_1165_567196.html
Question:	Is the 20v battery included
Answer:	No, the battery was not included.
Question:	What is max nail length
Answer:	The Dewalt brad nailer shoots brads from 5/8” up to 2-1/8”. Hope this helps.
Question:	Does anybody know which dewalt nailer would be a good all around gun for trim to framing in one
Answer:	Unfortunately, there is no such gun made. By any manufacturer. A nail that would be strong enough for framing, would absolutely destroy trim pieces.

Product description

The 2" 18-Gauge Brad Nailer - NT50AE2 is ideal for trim work, furniture building and other finish applications that require precision and performance that the pro and DIY both require. It accepts finish brad nails from 5/8" in length up to 2". With a lightweight economical design, this brad nailer is engineered for the toughest jobs.

• BRAD NAILER: Accepts 5/8" up to 2" 18-gauge brad nails
• FASTENERS: Accepts 5/8 In. to 2 In. 18-gauge fasteners
• TRIGGER: Selective actuation switch lets the user easily select bump fire or sequential fire modes
• LIGHTWEIGHT: Only 2.2 lbs, for easy all day use
• DEPTH ADJUSTMENT: Depth of drive dial allows the user to easily adjust the drive depth for a professional finish
• NO-MAR TIP: No-mar tip on the nose protects the work piece from unintended markings
• RELOAD INDICATOR: Located on the magazine, alerts the user when nail quantities are low so that blank drives are avoided

User questions & answers

Question:	Can this be used to nail quarter round to the floorboards
Answer:	This nailer is perfect for quarter round. The smaller 18 gauge nails make it less likely to split the wood. I’ve also noticed that this nailer doesn’t leave dimple marks. I’ve used mine to install base trim, quarter round, shiplap, and furniture making.
Question:	Is it possible to fix the safety so that I can shot without applying pressure to the nose where the nail exits the gun
Answer:	I wouldn’t, seems like a good way to shoot your finger. Some of my guns have double triggers and it’s not an issue. Plus how would you control the depth of the nail setting action.
Question:	why does it say power source corded electric
Answer:	I guess they mean the air compressor is electric and it’s the power source. The nailer is all air.
Question:	can this gun take 18 gauge headless nails
Answer:	I got a stapler in my box, don't know what you will get!

Product features

360 Degree Adjustable Exhaust Port

Keeps dust, debris and oil off the finish project.

Visual Nail Reload Indicator

Located on the magazine and alerts the user when nail quantities are low so that blank drives are avoided.

Selective Actuation

Allows the user to select bump fire or contact fire modes with the simple flip of a switch.

Tool-less, Easy-to-clear Nose

For quick and simple nail extraction should a nail jam during use.

Product description

The Freeman P4FRFNCB Pneumatic Framing and Finishing Nailers and Stapler Combo Kit with Canvas Bag (4-Piece) is an essential set of tools for professional construction contractors at the job site as well as DIYers tackling home improvement and repair projects. This collection of air powered nail guns and a stapler covers your framing to finishing needs and includes a 21 degree 3-1/2" Full Round Head Framing Nailer (PFR2190), 15-Gauge 34 Degree Angle 2-1/2" Finish Nailer (PFN1564), 18-Gauge 1-1/4" Brad Nailer (PBR32), and 18-Gauge 1-1/4" Narrow Crown Stapler (PST9032). The powerful framing nailer is specifically designed for tasks such as framing, sheathing, truss assembly, roof decking, subfloors, fencing, furniture, and assembling pallets and shipping crates. This durable nail gun features a one piece drive blade made of hardened steel and a lightweight magnesium body. Put the finish nailer to work on door and window casing, moulding, trim, chair rails, cabinetry, and other fine finish applications. The 34 degree angle of the magazine makes it easy to access corners or tight spaces, and the dual mode trigger allows to easily switch between sequential or bump firing. When the focus is on accuracy, use the sequential mode. When speed is the name of the game, engage the bump fire option and get to work. The brad nailer is ideal for interior and exterior finish and trim, furniture, cabinetry, picture frame assembly, and hobbies and crafts. An oil-free design eliminates the need for regular maintenance and prevents stains on your work surface. The narrow crown stapler is perfect for projects such as decorative trim, cabinetry, cabinet backing, and hobbies and crafts. The no mar safety tip prevents damage to your work surface, ensuring professional results. A canvas carrying bag, air tool oil, and adjustment tools are included. The Pneumatic Framing and Finishing Nailers and Stapler Combo Kit with Canvas Bag (4-Piece) will allow you to complete a wide variety of home improvement and repair projects quickly and easily.

• Powerful Combo: This kit features 4 of Freeman's most useful pneumatic nailers to cover all your framing and finishing needs: a framing nailer, a finish nailer, a straight brad nailer, and a narrow crown stapler. The kit includes a rugged canvas carrying bag.
• Heavy Duty and Fine Detail: The nailers included in this combo kit are ideal for everything from heavy duty work like subfloors, roof decking, fencing, and pallet building to fine detail work like cabinetry, crown moulding, window casings, base boards, and trim.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	Any suggestions on a pancake compressor for these guns
Answer:	Mines not a pancake compressor, but it is around the same size. I have a 2.6 gallon 2 HP compressor that works beautifully with these guns. It fills to 120 psi, and I have a regulator on the compressor that allows 80-90 psi through, depending on the gun I am using at the time. I can usually shoot 20-30 nails before it has to get more pressure built up, but never dropping below 90 psi. Since the tank is so small, it takes only seconds to fill again. I'm not sure what the rules are on linking to other items, but I bought the compressor off Amazon.
Question:	should you use a water separator or oiler with nail guns
Answer:	The only specification with the Freeman nail guns is to provide oil to the system. So I have only been oiling since water is not a problem in the air system I'm using. Some of the air supply systems I have used previously needed a water separator. If you are not sure about the amount of water in your system a water separator might be a very good addition.
Question:	Has anyone had trouble with these nail guns working right
Answer:	I have been using my framing gun 3 days out of the week as I continue to remodel my house. I have used the 15 gauge and 18 gauge guns just as much without any problems. I don't know if it's related to the setup and continuos maintenance but I have a filter on the compressor and use the air tool oil. I never exceed 120 psi on my framing gun and I adjust to 75 to 90 for the other guns. I continue to have good service from these tools.
Question:	what kind of nails does it use
Answer:	I use Hitachi fasteners. GEt mine at Lowe's. Used the Stapler and Angle Finish Nailer today. Built our 16'x16' deck with the Framing nailer. Great set of tools. LOOK here: http://www.lowes.com/Search=hitachi+nails?storeId=10151&langId=-1&catalogId=10051&N=0&newSearch=true&Ntt=hitachi+nails#!&Ns=p_product_price|0&page=1&N=0&N=2z8vj&N=2z8vk&N=2z8vl&N=2z8vm

Product features

PFR2190 21-Degree 3-1/2-Inch Framing Nailer

Adjustable depth for various applications.

Air filter/anti-dust cap keeps interior components debris free, extending tool life.

360-Degree adjustable exhaust allows user to direct air away from debris.

No-mar tip eliminates damage to working surfaces.

Oil-free design.

Anti-dry fire mechanism reduces damage on internal components.

Magnesium construction lightweight tool and great for extended use.

PFN1564 15-Gauge 2-1/2-Inch 34-Degree Finish Nailer

Adjustable depth for various applications.

Air filter/anti-dust cap keeps interior components debris free, extending tool life.

360-Degree adjustable exhaust allows user to direct air away from debris.

No-mar tip eliminates damage to working surfaces.

Oil-free design.

Quick jam release nose.

Dual-mode trigger easily allows for single or sequential firing.

PBR32Q 18-Gauge 1-1/4-Inch Straight Brad Nailer

Adjustable depth for various applications.

Air filter/anti-dust cap keeps interior components debris free, extending tool life.

360-Degree adjustable exhaust allows user to direct air away from debris.

No-mar tip eliminates damage to working surfaces.

Oil-free design.

Quick jam release nose.

PST9032Q 18-Gauge 1-1/4-Inch Narrow Crown Stapler

Adjustable depth for various applications.

Air filter/anti-dust cap keeps interior components debris free, extending tool life.

360-Degree adjustable exhaust allows user to direct air away from debris.

No-mar tip eliminates damage to working surfaces.

Oil-free design.

Quick jam release nose.

• 【Friendly customer service】Our air powered brad nailer has a great power, slight marks possibly left on the surface of wood, which is a normal phenomenon.
• 【One Stop Purchasing】 Pneumatic nail gun and stapler ship with carrying BMC case, safety glasses, lubricating oil bottle, 2 Allen wrenches, 1000 pcs 18GA free supply includes 400 pcs 2”+ 400 pcs 1-1/4” nails + 200 pcs 1-1/4” crown staples.
• 【User Friendly Design】 Low nail/staple view window avoid dry fire dent mark left on working surface, light easy carrying weight, 360° adjustable exhaust, quick and tool-free jam cleaning, Sequential mode trigger for precise nail placement.
• 【Easy Adapter 】Pneumatic brad gun work with pressure range 60 to 120 psi through common used 1/4 inch NPT. An air compressor is not sold with the nailer.
• 【Wide applications】 Nailer is perfect for Wood Working, Upholstery Installation, Flooring, Molding, Roofing, Picture Framing, Door and Window installation. Perfect for DIY projects too including building Pet Houses.
• 【QUALITY ASSURANCE & SERVICE】Neu Master dedicate to provide high-quality products and services, we provide new replacement instead of repairing.

User questions & answers

Question:	Does it have a non marring nose and is the depth adjustable
Answer:	Yes , there is a non-marring nose on this brad nailer, but no depth adjustable function, you can adjust the air pressure thru air compressor to get the penetration what you need.
Question:	can it use 1"nails
Answer:	Can either use 1" Brad nails or staples
Question:	Is there a specific type of compressor needed or anyone will do
Answer:	Pneumatic brad gun work with pressure range 60 to 120 psi through common used 1/4 inch NPT.
Question:	Is the air adjustable on the gun or just from the air compressor itself
Answer:	It just from the air compressor itself

Product features

Product Overview

The NEU MASTER Pneumatic Brad Nailer and Stapler is ideal for most trim nailing applications and drives 18 Gauge 2 Inch Brad Nails and 1-5/8 inch Staples . It provides sequential mode trigger for precise nail placement, a low-nail lockout mechanism to alert the user to reload . Additionally, the rubber grip handle provides utmost comfort and control when working . The kit includes carrying case, sample nails and Staples, lubricating oil bottle, 2 Allen wrenches and safety glasses.

• Easy carrying and lightweight at just 2.6 lbs.
• 360 degree exhaust port to control the direction of the outputted air.
• Tool-free jam release mechanism for easy nail/staple removal.
• The Low nail/staple view window avoid dry fire dent mark left on working surface.
• The Sequential mode trigger for precise nail placement .
• The rubber grip handle provides utmost comfort and control when working.
• Provide 2 years of new replacement instead of repairing services.

2020 Newest Pneumatic Brad Nailer/Stapler

A: Yes, Pneumatic nail gun is a great tool for working on projects such as Wood working, Upholstery Installation, Flooring, Molding, Roofing, Picture framing, Door and Window projects, Pet house DIY.

Q: Does this come in a case? what else?

A: Pneumatic nail gun not only ship with carrying BMC case, safety glasses, , lubricating oil bottle, 2 Allen wrenches, 1000 pcs 18GA free supply includes 400 pcs 2”+ 400 pcs 1-1/4” nails + 200 pcs 1-1/4” crown staples.

360 Degree Adjustable Exhaust Port.

Adjust the air exhaust to direct the pneumatic air output in any direction.

Tool-less, Easy-to-Clear Nose.

Tool-free jam release mechanism for easy nail/staple removal.

Easy Adapte

Pneumatic brad gun work with pressure range 60 to 120 psi through common used 1/4 inch NPT.

High Capacity Magazine.

The loaded magazine makes for quick and easy reloads and holds up to 100 nails.

MEET YOUR DIFFERENT PROJECT NEEDS

Product description

The Bostitch BT1855K 18-gauge brad nailer comes with one ¼-inch fitting, one carrying case, one hex wrench, and one belt hook.

• Oil-free engine: requires no daily maintenance and eliminates risk of oil stains on work surfaces
• Selectable trigger system: easy conversion between sequential or contact modes. Trigger lockout mode for use when working in occupied spaces
• Dial-A-Depth control: quickly and conveniently set fasteners to desired depths
• Filtered air inlet for improved engine durability
• Reversible belt hook: with integrated pencil sharpener for ultimate convenience

User questions & answers

Question:	Does the kit come with a carrying case or not? Description contradicts
Answer:	Yes, there is a carrying case included.
Question:	Power source in the description says “corded electric”. I thought the power came from the air compressor. Why am I having to plug it in as well
Answer:	Trust me, it is powered by an air compressor. In fact I used mine yesterday. This is a great product. Just remember to use compressor oil in the nailer before each use.
Question:	Is the trigger the only thing that activates the nail being fired? Seems less safe that way
Answer:	No, the nose of the nailer must be depressed to activate the nailer.
Question:	My moldings require a very accurate placement of the nail. Will the "smart point" be worth the extra money over other nailers
Answer:	Absolutely. I found the placement of the brads to be very accurate using the smart point. I use this nailer all of the time.

Product features

BOSTITCH Nail Gun, Brad Nailer, 18GA (BT1855K)

Description:

This 18 Gauge Brad Nailer Kit Is Both Lightweight And Durable With Easy Mai+ntenance. It Is Quiet And Easy To Maneuver. Depend On This 18 Gauge Brad Nailer Kit For Efficiency And Durability.

Features:

• Oil-free operation requires no regular maintenance and eliminates the risk of oil stains
• Selectable trigger system converts from sequential to contact operation
• Low nail lockout prevents dry firing
• Swivel air fitting with internal filter improves maneuverability
• Ultra-quiet rear exhaust with muffler directs air away from the user
• Reversible belt hook with integrated pencil sharpener
• Dial-A-Depth control for precise countersinking
• Includes Brad Nailer, 1/4" Fitting, Carrying Case, and sample fasteners

• This air powered nail gun has a great power, slight marks possibly left on the surface of wood, which is a normal phenomenon. We also prepare an empty oil bottle to fill with the oil you prefer.
• 【Full Brad Nail Gun Set】This Air Nailer includes: 2-in-1 brad nailer, 200 18-ga. brad nails 2”and 200 18-ga. crown staples 1-5/8", a hard-shelled carrying case, one【empty】oil bottle, one CE safety glasses, two hex wrenches. An air Compressor is not sold with brad nailer.
• 【MULTIFUNCTION】2-in-1 magazine drives both 18 gauge pneumatic brad nails and crown staples making this a highly versatile tool. It can accommodate nails ranging from 5/8”-2", staples ranging from 5/8”-1-5/8".
• 【STURDY MATERIAL】 Heat treated aluminum housing-extra heavy duty industrial design high-capacity magazine holds up to 100 brad nails or crown staples; Working air pressure 70-100PSI, max pressure 120PSI, which give you a easy perform of nail work.
• 【 MORE CONVENIENCE】 CE Safety glasses, which prevents accidental firing of wood dust. Nail reload indicator visual nail reload indicator, located on the magazine, alerts the user when nail quantities are low so that blank drives are avoided.
• 【ERGONOMIC DESIGN】Anti-slip rubber grip and 360 degree adjustable exhaust which give you a better experience with nail gun hitting. Tool-free jam release mechanism for easy nail removal. Safe trigger device provides a safe work.
• 【BETTER QUALITY】 Brad Nailer can nail 100,000 times, which provides longer service life. The lightweight aluminum body weighs only 2.4lb, which relieves the fatigue of the user during long work.

User questions & answers

Question:	How long is the warranty period
Answer:	TACKLIFE offers a 24 month warranty on its products. If you have any questions about this brad nailer, please contact us at [email protected] . We will solve the problem for you. Thank you for your question.
Question:	Can you use to shingle roof
Answer:	No the nails would be long enough but you wouldn't use a brad nail on a shingle. Very good for trim and diy projects around your house.
Question:	Does this use narrow or wide crown staples
Answer:	1/4" crown staples.
Question:	Does this use narrow (1/4 in. wide) crown staples or the wide one
Answer:	Narrow

Product features

The TACKLIFE 18 GA 2-in-1 Pneumatic Brad Nailer

The Tacklife 18 GA 2-in-1 pneumatic brad nailer heat treated aluminum Housing-extra heavy duty industrial design high-capacity magazine holds up to nails. The spacious magazine carries up to 100 brad nails 15-50mm or crown staples 16-40mm while the quick-release design makes jam clearing a breeze. Safety glasses are made from CE, which prevents accidental firing of wood dust.

NOTE: We not sell an air compressor with this pneumatic brad nailer, you need to prepare one before you start your project.