14 best lightweight nail gun gun

Product description

Sfr2190 features: -Framing nailer. -360° adjustable exhaust. -Finger depth adjustment. -Ergonomically designed comfort grip. Type of nailer: -Framing nailers. Type of fastener: -Framing nails. Generic dimensions: -20.75'' h x 15'' w x 5.75'' d. Dimensions: Overall height - top to bottom: -20.75 inches. Overall width - side to side: -15 inches. Overall product weight: -8.5 pounds.

• Nailed It: This 21 degree pneumatic framing nailer features a lightweight and durable magnesium body, ergonomic secure handle, and interchangeable trigger for quick fire or single shot function. It's ideal for professional construction contractors and home DIY projects.
• Versatile and Powerful: The framing nailer features depth adjustment and a no mar tip, making it adaptable for different working surfaces. It's perfect for framing, and it can also be used to install subfloors, roof decking, wood fencing, and sheathing.Minimum Recommended Air Delivery SCFM @ 90PSI:2.4
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	will it take any brand of nails
Answer:	I have used two different brands so far. As long as the nails are plastic coated, 21 degree I believe any brand would work. The best prices I have found on nails is at harbor freight. 2500 nails for around $28. I have used 2 1/2" and 3 1/2"
Question:	How come just below the nailer specs they say "often bought with this product"....22 degree nails....not
Answer:	I used some of the 22 degree without a problem. I've used Bostich guns for 30 years prior to this gun & this is as good as any I've used.t's a great nailer
Question:	do the nails have to be plastic coated
Answer:	Plastic coated? No. But I do believe they have to be Plastic Collated, that is, they need to be bound together with plastic. I'm not sure if paper collated nails will work.
Question:	What kind of air compressor do you recommend for this nailer
Answer:	It really depends on how you're using it. If you're intermittently nailing with in and not imitating a machine gun- you can use a pancake or similar small compressor. The working pressure of the nailer is 70-115 PSI. I run mine at 100 PSI. Any portable compressor should be able to hit that pressure. The real question is duty cycle. If you're nailing every few seconds then you'll need a compressor capable of keeping up with the volume of air being consumed OR you'll have to slow down until your compressor stops running before firing the next nail. I run mine on 2 different compressors and don't have any issues- one is a 40 gallon shop compressor- the CFM is infinite compared to the gun. The other compressor is 2.6 CFM. I don't rapid fire when I'm using it and I can fire several nails before the compressor has to cycle. As long as you're not continuing to fire when the compressor is running you should be OK.

Product features

Numax 21º Full Head Framing Nailer

It's time to tackle a new project - and we have just the tool to get it done. The SFR2190 is perfect for framing, but did you know you can also use a framing nailer to install sub-floors, roof decking, wood fencing, sheathing, and more? We designed this nailer with you in mind, so it has all of the premium features you need to get started.

Step 1: Choose Firing Mode

Your framing nailer comes with a black single-fire trigger already assembled. This is the best choice if you haven't used a framing nailer before, or if you want accurate nail placement.

Follow the manual instructions to install the red bump-fire trigger if you want quick successive firing.

Step 2: Connect to Compressor

Set your compressor to 70 PSI and use the quick-connect fitting on your air hose to connect your framing nailer. If you have a really dense material, you can increase the pressure up to 115 PSI.

Put a few drops of oil into the fitting before connecting to a compressor to keep things running smoothly!

Step 3: Load Nails

Pull the side lever back along the magazine until it snaps into place.

Drop the nails into the open channel on the top of the magazine. The angle of the nails should match the angle of the nose of the nailer.

Lift the lever at the back of the magazine to release the side lever and secure the nails.

Step 4: Adjust and Go!

This nailer is loaded with features that let you customize for any project. Change the depth adjust, 360º air exhaust, or remove the no-mar tip for extra holding power.

Pro Tip: Use piece of scrap material to test out your nailer before starting on the real thing!

21º Plastic Collated Full-Head Framing Nails

A 'plastic collated nail' just means that the nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the SFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

• MULTIFUNCTION: 15° coil pneumatic roofing nailer with 120 nails capacity magazine. It can accommodate nails ranging from 3/4”to 1-3/4". The high-capacity magazine holds up to 120 nails; Working air pressure 70-100PSI, max pressure 120PSI, which give you a easy perform of nail work.
• DEPTH ADJUESTABLE: POWERSMART nail gun can let user to precisely locate the depth of nails. It is tool-free adjustment for depth-of drive setting of correct nail heads. Make a smart choose for your project.
• ULTRA QUALITY: The PowerSmart Roofing Nail Gun can fire more than 100,000 times. The lightweight aluminum body weighs only 5.78lb, which relieves the fatigue of the user during long work. Package included: Nailer / 240pcs 1-1/2in. nails / 2 x Hex wrenches :M4 (3mm),M5 (4mm) / Lubricant / Safety glasses / User manual
• APPLICATIONS: The POWERSMART roofing nailer is a ultra tool for upholstery, woodworking, flooring, roofing, molding, door and window installation etc. Perfect for user with common nailing knowledge.
• CUSTOMER SATISFICATION: PowerSmart is always aiming on providing great consumers value with the absolute best price and quality entire line of products. All of our products qualify for a 2 years warranty, Our service team will provide premium service to help solve any problem.

User questions & answers

Question:	Wil this tool nail the wooden roofing and the asphelt shingles
Answer:	So, far so good. I got the one with the Castle on it. I do really like the way it looks on my xs iphone. I'm not a big cell user so a lot of the time it's in my pocketbook. Hope this helps you out.
Question:	what is the weight of this nail gun
Answer:	I believe the Elders wand and the Orion’s Belt
Question:	Does this require separate air compressor? sorry know nothing about these things
Answer:	This case is for iphone xr, pls refers to the description, thanks.
Question:	What is the angle of the nails? 15 or
Answer:	Yes, this bling space case can work with wireless charger.

Product features

POWERSMART STORY

Ranging from a wide range of lawn mowers, snow removal, garden tools, drill driver, and generator, POWERSMART is commited to offer users throughout worldwide with highly practical and low failure rate of multi-functional and innovative series in terms of outdoor power tools. In years, our knowledgeable and accountable team continuous to take whatever it takes to create best vaule for our customers, you can 100% count on POWERSMAERT to help you get the job done.

• 📢Friendly customer service: we provide new replacement instead of repairing.
• For Free -- 800pcs nails and 200pcs staples included.
• 🔰【Spiral-Drive Technology And Cordless Design】With its spiral-drive technology, the cordless brad nailer stapler deliver more full-power shots than comparable corded tool without the hassle of using cord, gas and compressor.
• 🔰【Up To 1100 Shots Per Full Charge】Powered by NEU MASTER 20v MAX rechargeable Lithium-Ion battery which has passed 1000 charging cycle test, the electric nail gun/staple gun can deliver up to 1100 full power shot per full charge.
• 🔰【2-in-1 Versatile Battery Brad gun/Staple gun】It drives 1/4'' crown staple from 5/8'' to 1'', and 18 gauge brad nail from 5/8'' to 1-1/4'', which makes its ideal for fastening lightweight decoration trim, installing sheets of insulation, home repair while not recommended for quarter round installation or heavy duty construction projects.
• 🔰【Flawless Finish And User Friendly】Non-Marring rubber nose provides a complete finish. Oversize trigger and an ergonomic handle to combat grip fatigue during strenuous or time-consuming tasks.
• 🔰【LED Light And Belt Hook】With LED lights and the belt hook, you can illuminate work area and take your cordless staple gun/nail gun anywhere to get the job done.

User questions & answers

Question:	Why is it not recommend for 1/4 round install
Answer:	It should work for shoe mould.
Question:	Hi, are the brads long enough for crown molding
Answer:	Dear Steven, No. The brads used for this cordless brad nailer NTC0023 may be too short to used for crown molding. If you have any issues please feel free to contact [[email protected]] and we will reply to you ASAP. Spartatool Support Team
Question:	Will this unit work with "Headless" brads
Answer:	It works with staples and brad nails. Head is rather small on brad nails already but if you are talking about finishing nails or pins then no it won’t work. If you’re looking for something to staple fabric or nail MDF then it’s a really good tool.
Question:	Made in china
Answer:	Hello Customer, Yes. As a new seller, we take full responsibility for our customers, and our NEU MASTER products are backed with 2 year warranty. Please feel free to contact us via [[email protected]] if you have any issue and we will answer you ASAP. Spartatool Support Team

Product features

For dedicated crafters and DIYers who don’t want to be constrained to gas, cord or air compressor, the NEU MASTER NTC0023 cordless nail gun/staple gun is the tool to use. With its spiral-drive technology powered by a NEU MASTER 20V MAX Lithium-Ion battery NTC0023-18 is ready to go to work without the hassle of using gas, compressor and cord. Its delivers up to 1100 shots on a single charge. Its drives 1/4'' crown staple from 5/8'' to 1'', and 18 gauge brad nail from 5/8'' to 1-1/4'', which makes it ideal for fastening lightweight decoration trim, installing carpet, installing sheets of insulation, repair work, and more. Kit includes a Brad Nailer Stapler, a 20-Volt li-ion battery, a battery charging unit, 200pcs 3/4'' staples, 400pcs 5/8''brad nails and 400pcs 3/4'' brad nails.

• 100% battery powered; eliminates the hassle of using gas, compressor, and cord
• Battery is compatible with all NEU MASTER 20V cordless tool
• spiral-drive technology maximizes runtime and durability
• Delivers up to 1100 shots on a single charge
• Magazine holds up to 100 brad nails or staples
• Drives 1/4'' crown staple from 5/8'' to 1'', and 18 gauge brad nail from 5/8'' to 1-1/4''
• LED lights illuminate work area
• Ergonomic handle for comfort and control
• Power adjustment dial and oversize trigger
• Features a quick-release mechanism
• Non-marring nose provides a flawless finish
• Belt hook for user convenience
• Great for fastening lightweight decoration trim, installing carpet, installing sheets of insulation, repair work, and more.

Product description

The NuMax SFN64 Pneumatic 16-Gauge 2-1/2" Straight Finish Nailer is ideal for applications such as decorative trim, furniture trim, rail molding, crown molding, window casing, door installation, base boards, chair rails, picture frame assembly, and hobbies and crafts. Compatible with 16 gauge straight finish nails from 1" to 2-1/2", This air powered nail gun features a quick jam release for fast clearing in the event of a jammed fastener, along with a tool-free finger depth adjust for various applications. An ergonomically engineered die cast aluminum body makes this rugged and lightweight finish nailer easy to operate over extended periods of time. The comfort grip handle and No mar safety tip ensure great results by increasing precision and preventing damage to your working surface. A one piece drive blade of hardened steel adds to the durability of this nail gun. Air tool oil and adjustment tools are included. The Pneumatic 16-Gauge 2-1/2" Straight Finish Nailer is an essential tool for DIYers at home as well as professional contractors at the job site.

• Nailed It: This pneumatic 16-gauge straight finish nailer features a lightweight and durable aluminum body, and an ergonomic comfort grip handle. A no mar tip prevents dents and dings, and the quick jam release lets you easily clear jams without taking the nailer apart.
• Many Uses: This finish nail gun is great for interior and exterior finish and trim, furniture, cabinet work, staircases, base boards, shoe and crown moulding, window casing, and chair rail moulding. Sequential firing and tool-free depth adjust allow you to customize for any project.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	Would this gun work for face nailing 3/4" Oak hardwood floors
Answer:	There are 2 light kits that will match the oil rubbed bronze finish of your fan, however it may not be 100% match but it is the closest to it. The part numbers are ; 77850 & 77846. Unfortunately, it is not remote control adaptable.
Question:	can you use 2" or 1-1/2" 16 gauge finish nails in addition to the
Answer:	These are ABS resin blades (acrylonitrile butadiene styrene).
Question:	Can you use 18 gauge nails
Answer:	There are a number of down rods that can give different hang lengths
Question:	Does this tool require an air compressor
Answer:	Approximately 11” diameter

Product features

16 Gauge Straight Finish Nails

The SFN64 is designed to fire 16 gauge straight finish nails anywhere from 1" to 2.5". Just like the name suggests, straight finish nails are perfect for interior and exterior finish projects like trim, furniture, cabinet work, base boards, shoe and crown molding, window casing, chair rail molding, and more. The thin gauge and small head allows these nails to disappear into your woodwork, which means you spend less time filling in holes and sanding. Don't be fooled by their small size - finish nails are strong and these nailers are an essential part of any professional's tool box. Whatever your project is, we have the right size nail for you!

16 Gauge Straight Finish Nails

The SFN64 is designed to fire 16 gauge straight finish nails anywhere from 1" to 2.5". Just like the name suggests, straight finish nails are perfect for interior and exterior finish projects like trim, furniture, cabinet work, base boards, shoe and crown molding, window casing, chair rail molding, and more. The thin gauge and small head allows these nails to disappear into your woodwork, which means you spend less time filling in holes and sanding. Don't be fooled by their small size - finish nails are strong and these nailers are an essential part of any professional's tool box. Whatever your project is, we have the right size nail for you!

16 Gauge Straight Finish Nails

The SFN64 is designed to fire 16 gauge straight finish nails anywhere from 1" to 2.5". Just like the name suggests, straight finish nails are perfect for interior and exterior finish projects like trim, furniture, cabinet work, base boards, shoe and crown molding, window casing, chair rail molding, and more. The thin gauge and small head allows these nails to disappear into your woodwork, which means you spend less time filling in holes and sanding. Don't be fooled by their small size - finish nails are strong and these nailers are an essential part of any professional's tool box. Whatever your project is, we have the right size nail for you!

16 Gauge Straight Finish Nails

The SFN64 is designed to fire 16 gauge straight finish nails anywhere from 1" to 2.5". Just like the name suggests, straight finish nails are perfect for interior and exterior finish projects like trim, furniture, cabinet work, base boards, shoe and crown molding, window casing, chair rail molding, and more. The thin gauge and small head allows these nails to disappear into your woodwork, which means you spend less time filling in holes and sanding. Don't be fooled by their small size - finish nails are strong and these nailers are an essential part of any professional's tool box. Whatever your project is, we have the right size nail for you!

Product description

The Makita 3-1/2” framing nailer (model AN924) combines durable construction and robust performance with ease-of-use features for commercial framing applications. The AN924 is engineered for a range of applications including framing walls, floors, and roofs, construction of sub-flooring, roof and floor decking, floor and wall sheathing/Siding. It is ideal for framers, roofers and carpenters. The AN924 accepts full round-head nails, 2” - 3-1/2”, with up to . 148” (16D) shank diameter, and the 2-mode selector switch (bump, sequential) provides increased convenience. The AN924 is engineered for longer tool life and ease-of-use, with a built-in air filter to minimize dust and debris from entering. Additional features include an anti-dry mechanism that stops the tool when three nails remain in the magazine, a solid rear-loading aluminum magazine for longer service life, and rubber hand-grips to provide more comfortable handling.

• Faster nail driving speed for maximum performance
• Large capacity air chamber for increased power to drive nails up to 3-1/2" X. 148 in diameter
• Drives 21º plastic collated framing Nails from 2" To 3 1/2" In length and. 113 too. 148 in diameter
• Lightweight design at only 8. 3 lbs
• Solid top-loading aluminum MAGAZINE for longer life

User questions & answers

Question:	Why is mine making a whoopie custion sound when it fires
Answer:	Sounds like a seal or o ring is out
Question:	Does it come with rafter hook
Answer:	Yes it does come with a hook
Question:	does this Makita come with a carrying case
Answer:	No caring case Great nail gun.
Question:	New to nail guns. Are the nails proprietary to the manufacturer or can you use other brands
Answer:	you can use other brands works great

Product features

Makita AN924 21º Full Round Head 3-1/2" Framing Nailer

The 21º Full Round Head 3-1/2" Framing Nailer (model AN924) combines durable construction and robust performance with ease-of-use features for wood framing applications. The AN924 is engineered for a range of applications including framing walls, floors and roofs, as well as construction of roof and floor decking, floor and wall sheathing/siding, and sub-flooring. It is ideal for framers, roofers and carpenters.

The AN924 drives 21º plastic collated framing nails from 2" to 3 1/2" in length and .113 to .148 in diameter. It has a 2-mode selector switch (bump, sequential) for increased convenience. The AN924 has a lightweight design (only 8.3 lbs.) with durability features that include a heat-treated S7 steel driver blade, a solid aluminum top-loading magazine, and a nail lock-out mechanism that protects the tool and work surface from dry-fires. Added features include tool-less depth adjustment for flush or countersink nailing, added tool hook, and an ergonomic rubberized grip.

• 📢Friendly customer service: we provide new replacement instead of repairing.
• FOR FREE---Tools includes 200 staples and 800 brad nails.
• 🔰CONVENIENCE --The wire 2-in-1 brad gun/staple gun doesn't need compressors, hoses for convenience use.
• 🔰WIDE APPLICATION -- The upholstery nail gun ideal for softwood DIY projects such as Carpentry DIY, picture framing, door or window molding installation, pet house DIY while not recommended for quarter round, baseboard, drywall installation, roofing and flooring.
• 🔰FLAWLESS FINISH -- Non-Marring rubber nose provides a complete finish.
• 🔰FRIENDLY USE -- The wire 2-in-1 brad gun/staple gun equipped with ergonomic soft-grip handle for reducing worker fatigue.
• 🔰ADJUSTABLE POWER -- This electric brad nailer designed with adjustable power function for light-duty project.

User questions & answers

Question:	Mine will fire but it wont shoot any nails and i have not even used it for a day
Answer:	I could get mine to shoot, but it wouldn't go into soft trim more than 1/8 inch. That was maximum depth... Most were less than half that. I sent it back.
Question:	Repairing rattan rawhide bindings. Will this shoot 23 GA, 3/16" crown, 3/8" leg
Answer:	Hello Customer, No, this electric Brad Nailer/Stapler drives 18 GA brad nails up to 1-1/4'' inch and 1/4'' crown staples up to 1". Using improper nails/staples may cause operational problems. Hope this can help you. If there is anything issue we can help you, please do not hesitate to contact us via [[email protected]] and we will reply to you ASAP. Spartatool Support Team
Question:	podrias especificar con que grapas es compatible y donde se puede adquirir las grapas
Answer:	Puedes conseguir las en Walmart o cualquier ferretería. A mi me a sido muy útil.
Question:	Electric brad nailer, neu master ntc0040 electric - does this model drive 1”, 1 1/2” and 2” brads
Answer:	Hello Customer, The longest brad nails can be used for this electric brad nailer/stapler is 1-1/4''. And this length is recommend for soft wood. Hope it can help you. If you have any issue or need help during use, please do not hesitate to contact us via [[email protected]] and we will do our best to serve you. Spartatool Support Team

Product features

Product Overview

The NEU MASTER NTC0040 Electric Brad Nailer/Stapler drives 18 gauge brad nails up to 1-1/4'' inch and 1/4'' crown staples up to 1" which makes it ideal for general repairs, craftwork, interior or exterior decorative lightweight trim, upholstery, and more. No compressor needed and the nail gun features a quick-release mechanism and an overmolded grip for convenient use. Kit includes a Brad Nailer Stapler, 400pcs 5/8'' brad nails, 400pcs 3/4'' brad nails and 200pcs 3/4'' staples.

• Drives nails and staples
• Ergonomic grip for comfort and control
• Power adjustment dial and oversize trigger
• Quick-release mechanism
• Contact safety with non-marring nose provides a flawless finish

Product description

This CRAFTSMAN V20 MAX 18GA cordless finish nailer's cordless design eliminates the need for compressors, hoses, or costly Gas cartridges. The motor delivers consistent power firing in various weather conditions and materials. The extensive runtime on a single battery and Fast shot speed allow for less downtime on the jobsite. The single tool-free depth setting makes adjusting your nail depth quick and simple, while the other tool-free settings make potential nail jams or stalls easy to fix. The cordless finish nailer is lightweight and well balanced, making this product very comfortable to use for prolonged time.

• CRAFTSMAN V20 MAX cordless nailer drives adhesive collated 18 gauge finish nails
• Fully cordless design eliminates the need for compressors, hoses or costly Gas cartridges
• Provides consistent firing power in various climate conditions and materials
• Tool-free depth settings for quick set up and consistent results
• Tool free jam and stall settings for ease of use and improved efficiency
• Lightweight with optimal center of gravity provide optimal balance and comfort in hand during use
• Contoured overmolded handle for added comfort during use

User questions & answers

Question:	Will DeWalt battery work
Answer:	No, the CMCN618C1 should only be used with the CRAFTSMAN battery.
Question:	Can this be used to attach wall panel to an old shipping pallet? I'm building a bar. Thanks
Answer:	Absolutely yes! I use this one every single day for my projects, shiplap, pallets, plywood, crown molding, etc. just be sure to get the right nail size and go ahead!!
Question:	Can this tool work with the Black and Decker 20 volt battery for the Matrix system
Answer:	No. The batteries for DeWalt, Black & Decker, Porter Cable, and Craftsman do not cross brands and are not compatible.
Question:	Does this unit come with a battery and charger
Answer:	Yes, The CMCN618C1 comes with one battery and one charger.

Product description

The NV65AH2 Coil Siding Nailer brings power, precision and convenience to the jobsite. Capable of driving nails as large as 2-1/2" x .099" at a rate of 3 per second, the NV65AH2 is both powerful and efficient. With added features like a selective actuation switch, side-load tilt bottom magazine and repositioned depth of drive adjustment dial, this professional siding nailer gets even better. Additional features such as the adjustable air deflector, no-mar nose cap and plastic shield add convenience, and the ability to use both wire or plastic sheet nails creates flexibility.

• SIDING NAILER: Accepts 16º wire collated coil siding nails from 1-1/2" - 2-1/2". Also accepts 15º plastic collated coil siding nails from 1-1/2" - 2-1/4"
• SELECTIVE ACTUATION: Switch between sequential or contact nailing with the simple flip of a switch
• EASY LOAD: Side load, tilt bottom magazine for fast and easy reloads
• FASTENERS: Drives wire and plastic sheet collated siding nails for added flexibility
• NO MAR NOSE CAP: Protects material from accidental marks
• DEPTH ADJUSTMENT: Tool-less depth of drive adjustment for optimal depth in a variety of applications
• AIR DEFLECTOR: Adjustable air deflector directs the air exhaust in any direction

Product features

No mar nose cap attachment

Protects material from accidental marks.

Tool-less depth of drive adjustment

For optimal depth in a variety of applications.

Selective actuation switch

Allows for either sequential or contact nailing with the simple flip of a switch.

Plastic shield

Deflects wire collation for added safety.

Product description

The 16-Gauge Finish Nailer NT65M2S features a non-slip elastomer grip trigger and ergonomically designed simple flip actuation switch. It is ideal for installing molding, chair rail, cabinetry and other fine finish applications. The NT65M2S accepts 16-gauge finish nails in lengths ranging from 1" Up to 2-1/2" And is equipped with Metabo HPT signature air Duster button to conveniently blow away dust and debris instantly to clear the work surface.

• FASTENERS: 16-gauge finish nails in lengths ranging from 1-in up to 2-1/2-in
• AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine
• TRIGGER: Selective actuation switch lets the user easily select bump fire or sequential fire modes
• LIGHTWEIGHT: Only 3.7 lbs and well-balanced for minimal fatigue and increased maneuverability
• DEPTH ADJUSTMENT: Tool-free depth of drive adjustment helps to provide a professional finish when fastening into varying materials
• APPLICATIONS: Ideal for installing molding, chair rail, cabinetry and other fine finish applications
• EXHAUST PORT: 360 degree, fully adjustable exhaust port directs air exhaust away from the user during use

User questions & answers

Question:	what all comes in the box
Answer:	2 inch
Question:	Benden refacciones de esa pistola
Answer:	I use 16 gauge finishing nails! I’ve used nails from 1” inch up to 2” nails. Had this tool for a year and love it! I use dewalt brand, but other brands will work! The gun will specify what gauge such as 16 in this case!
Question:	Is the no-mar tip removable where the no-mar tips is not needed for work other than finish work
Answer:	Yes in the first 30 days. Other than that no warranty
Question:	What type of air compressor should I buy to use with this
Answer:	This is more than a brad nailer. It does 16 ga finishing nails up to 2-1/2 inch in length. I used it for nailing the baseboard in my house.

Product features

Tool-less, Easy-to-Clear Nose

For quick and simple nail extraction should a nail jam during use

360 Degree, Fully Adjustable Exhaust Port

Directs air exhaust away from the user during use

Ergonomically Designed Simple Flip Actuation Switch

For easy transitions between bump fire or sequential fire modes

Factory Installed Air Fitting

Is angled upwards to keep the compressor hose conveniently out of the way of the user and work piece

Product description

The NV45AB2 1-3/4-Inch Roofing Nailer is used for various construction work such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine. When only the best will do for roofing applications, choose the roofing nailer that has been sought after by professionals for decades.

• APPLICATIONS: Ideal for installation of asphalt roofing shingles and insulation boards
• EASY FASTENER INSTALLATION: Side loading magazine, convenient and easy for quick replenishment
• LIGHTWEIGHT: At only 5.5 Lb., the NV45AB2 is lightweight and well balanced for easy maneuverability
• SPEED: Quick driving system, for maximum efficiency
• DEPTH ADJUSTMENT: Tool-less depth of drive adjustment, for precision nailing/flush driving
• RUBBER PADS: Help keep nailer from sliding off roof when not in use
• CARBIDE TIPPED PUSH LEVER: Reduces wear
• DURABLE: Pneumatic power feed and return, allows tool to operate in the harshest conditions

User questions & answers

Question:	Recommended air pressure
Answer:	Hello, Thank you for your interest in the Metabo HPT Roofing Nailer. The recommended air pressure is between 70 and 120 PSI. Thank you again and have a great day!
Question:	Can I used .092” nails or do I have to use .12” nails
Answer:	Hi there! This tool only accepts nails that are .120" in diameter. Hope this helps!
Question:	Does it come with the carrying case
Answer:	No it does not
Question:	Diámetro medida de la manguera
Answer:	Muy bueno la pistola gracias

Product features

Side Loading Magazine

Convenient and easy for quick replenishment

Long-lasting Rubber Grip

For added comfort

Carbide Tipped Push Lever

Reduces wear

5.5 lbs, Lightweight and Well Balanced

For easy maneuverability

Product description

The 2" 18-Gauge Brad Nailer - NT50AE2 is ideal for trim work, furniture building and other finish applications that require precision and performance that the pro and DIY both require. It accepts finish brad nails from 5/8" in length up to 2". With a lightweight economical design, this brad nailer is engineered for the toughest jobs.

• BRAD NAILER: Accepts 5/8" up to 2" 18-gauge brad nails
• FASTENERS: Accepts 5/8 In. to 2 In. 18-gauge fasteners
• TRIGGER: Selective actuation switch lets the user easily select bump fire or sequential fire modes
• LIGHTWEIGHT: Only 2.2 lbs, for easy all day use
• DEPTH ADJUSTMENT: Depth of drive dial allows the user to easily adjust the drive depth for a professional finish
• NO-MAR TIP: No-mar tip on the nose protects the work piece from unintended markings
• RELOAD INDICATOR: Located on the magazine, alerts the user when nail quantities are low so that blank drives are avoided

User questions & answers

Question:	Can this be used to nail quarter round to the floorboards
Answer:	This nailer is perfect for quarter round. The smaller 18 gauge nails make it less likely to split the wood. I’ve also noticed that this nailer doesn’t leave dimple marks. I’ve used mine to install base trim, quarter round, shiplap, and furniture making.
Question:	Is it possible to fix the safety so that I can shot without applying pressure to the nose where the nail exits the gun
Answer:	I wouldn’t, seems like a good way to shoot your finger. Some of my guns have double triggers and it’s not an issue. Plus how would you control the depth of the nail setting action.
Question:	why does it say power source corded electric
Answer:	I guess they mean the air compressor is electric and it’s the power source. The nailer is all air.
Question:	can this gun take 18 gauge headless nails
Answer:	I got a stapler in my box, don't know what you will get!

Product features

360 Degree Adjustable Exhaust Port

Keeps dust, debris and oil off the finish project.

Visual Nail Reload Indicator

Located on the magazine and alerts the user when nail quantities are low so that blank drives are avoided.

Selective Actuation

Allows the user to select bump fire or contact fire modes with the simple flip of a switch.

Tool-less, Easy-to-clear Nose

For quick and simple nail extraction should a nail jam during use.

Product description

The NR90AES1 framing nailer drives plastic collated nails from 2" up to 3-1/2" in length and features Metabo HPT's next generation "industrial design."



Weighing only 7. 5 lbs, this framing nailer is easy to use all day, while still providing the power similar to other bulkier and heavier framing nailers.



The NR90AES1 framing nailer is great for flooring and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.



The redesigned head guard of the NR90AES1 framing nailer allows for a faster and easier disassembly process, saving valuable time during tool main10ance.

• NAILER: 21 degree plastic collated framing nailer
• APPLICATIONS: Great for flooring and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction
• LIGHTWEIGHT: At only 7. 5 lbs and well-balanced allowing for ease of maneuverability and less user fatigue
• SELECTIVE ACTUATION: Allows for quick changes between sequential and contact nailing with the flip of a switch
• TOOL-LESS DEPTH ADJUSTMENT: Depth adjustment to countersink or flush drive into a variety of materials
• FASTENERS: Accepts 2-in up to 3-1/2-in plastic collated framing nails
• AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine

User questions & answers

Question:	Aside from the name, is there any difference between this and the hitachi nr90aes
Answer:	Good morning, No difference at all. Same exact tool other than the name. Have a wonderful day :)
Question:	Can u use this gun to use on concrete wall faring strips
Answer:	This gun shoots a plastic collated nail with the angle of the nails at 21 degrees. It shoots up to a 3 1/2” nail. It will shoot nails into wood but not concrete. Hope this helps!
Question:	Can the air inlet fitting be changed to a different size? my compressor (craftsman cmec6150) has 1/4" npt. nailer has 3/8" inlet
Answer:	Absolutely, it will allow more air flow with less pressure.
Question:	Does this nailer take 22 degrees nails
Answer:	The variance on the 20-22 Degree Nailers is 19.5 to 22 Degrees. There is no separate difference between any of these tools that are designed for 20 Degree Plastic Collated FRH Nails. Anybody who makes a statement otherwise does not know what they are talking about, or has bought some bad nails in the past and it got blamed on the 1 Degree difference. First off, unlike Senco, Bostitch and Paslode, who manufacture most of their Nails or govern the quality of the spec, most manufacturers of pneumatics do not manufacture their own nails, they source to the lowest bidder, which means you can get some real junk. You get what you pay for. Most of the North American produced product is of good quality.

• Air Inlet: 1/4 inch NPT Thread
• Operating Pressure: 80-120 PSI
• Driver Diameter: 0.16 inch
• Removable Nails Range: 10-20 gauge

User questions & answers

Question:	How to change o rings
Answer:	Same battery. they are interchangeable, The charger too. same. I have had great luck with the two I own. I wish they made a framing nailer.
Question:	Will it countersink nails in a 2x6 wood deck. Need to prepare boards for sanding. thanx
Answer:	I have used 2".
Question:	Will this tool drive nails through unplaned 3/4" fir siding boards into studs (removing nails completely from the siding boards
Answer:	According to the Senco manual I received with my Cordless F-18 nail gun (manual lists units F-15, F-16A, F-16S, F-18), "Senco warrants that the Senco Cordless tool will be free from defects in materials and workmanship for two years after the purchase date. Senco warrants that the batteries and chargers used with Senco Cordless tools will be free from defects in materials and workmanship for one year after the purchase date"
Question:	Will it pull the nails out of thin pallette wood so that you can re-use that piece of wood? Easily? How does it work
Answer:	Good Morning, Thank you for emailing us about the Senco FramePro 701XP Clipped. This does not have a rafter hook. I hope you havea great day!

Product features

Product Description

Air Locker AP700 is a powerful tool designed to push out nails from a variety of soft and hard woods without affecting the quality. With a lightweight die cast Aluminum body.

AP700 isn't only highly durable but features an ergonomic rubberized grip so you can work for long hours without any fatigue.

The tool comes with a slim elongated nose that easily gets into cramped spaces while hardened hammer delivers a powerful blow to remove the nail. Now you can denail reclaimed wood like a pro. You'll need an air compressor for usage.

APPLICATIONS:

• Remove nails from floorboards, weatherboards, fiber sheets, skids, pallets, boards, barn lumber, sheathing and wooden decks.
• Works with different types of soft and hard woods including Pine, Poplar, Chestnut, Sycamore, Oak, Locust, Hickory, Osage orange, White Oak and Maple.

Rubberized comfort grip for fatigueless use

Often you need to work long hours when you have large project. AP700 comes with a rubberized ergonomic grip that doesn’t only feel great in your hand but keeps you going preventing fatigue and soreness.

Denail boards/pallets without any damage

Why spend hours removing nails manually when you can denail wood in a matter of minutes? This amazing nail puncher brings you exceptional portability that you'll appreciate. Removes or sinks nails between 10-20 gauge sizes.

Lightweight durable die cast Aluminum body

Quiet and precise operation saves effort and time. The die cast aluminum body makes the device durable but the overall unit still weighs just under 2 lbs. and feels great in your hands. Ideal for recycling wood while maintaining its quality.

Push variety of nails out of hard woods

The nail puncher provides enough power to push nails out of thick pallets. You can also use AP700 to sink nails into a variety of soft and hard woods including Pine, Poplar, Chestnut, Sycamore, Oak, Locust, Hickory, White Oak and Maple.

Rubberized Ring Prevents Slidage

The nail puncher has a rubberized ring around the rear end of the unit to prevent sliding when you are not using it.

Directional Exhaust adds Convenience

The rear end also features a directional exhaust which you can rotate 360 degrees to direct exhaust away from your face or work area.

• 🎁Friendly after-sale service--We provide replacement service instead of repairing.
• For Free -- 200pcs nails and 336pcs staples included.
• ✅【The versatile 2 in1 brad nailer/stapler】- Due to staples and brads that the corded nail gun and a staple gun is compatible with, there are numerous applications for this tool such as general repairing, installing sheets of insulation and attaching lightweight trim, etc.
• ✅【Easy to use】- The upholstery brad gun/staple gun doesn't need a compressor and features a quick-release mechanism and an over-molded grip to combat grip fatigue during strenuous or time-consuming tasks.
• ✅【More efficiently】- The lightweight tacker can drive 30 shots per mins. It is more convenient/efficient to get the job done that the viewing window can show the quality of the nails and the time to refill the magazine.
• ✅【Selectable Power】- Comes with power adjusted knob, it’s easy to improve the work efficiency by adjusting the nailing strength according to the needs of the work.
• ✅【Quality Assurance】- WORRY-FREE-2-year-warranty. To help better use the nail/staple gun, please read the instructions carefully before use. If any questions or suggestions, please share with us and we will reply within 24 hours.

User questions & answers

Question:	Where does this ship from
Answer:	Our products are fulfilled by Amazon and the products will ship form the Amaozn Warehouse. Hope this can help you. If you have any other issues please feel free to contact us via with more details so that we can offer you more help. Spartatool Support Team
Question:	what is the difference between this model and NTC0040 model
Answer:	Thank you for your question. The sizes and specifications of the nails/staples used by the two nail guns are different. Therefore, the projects applicable to the two guns will also be different. This NTC0060 stapler works with Staple T50 series or TRA700 series from 5/16" to 5/8" and 18 gauge brad nail 9/16'',5/8''.But NTC0040 nail gun works with 1/4'' crown staple from 5/8'' to 1'', and 18 gauge brad nail from 5/8'' to 1-1/4''.
Question:	How long is the electrical cord. The listing said an extension lessons the impact power of the staple/brad
Answer:	Dear, thank you for your question. The cord is 6.5ft long and we do not recommend using extension cords. But if you need it, you can use a 12AWG cord to make sure that current losses can be minimized as much as possible. I hope my answer is helpful to you!
Question:	Can we use it for installing a stair carpet runner
Answer:	Hello Customer, Thank you for your question. Yes, this electric bard nail can be used for installing a stair carpet runner. Hope it can help you. If you still have any issue about this product, please do not hesitate to contact us via [[email protected]] and we will reply to you ASAP. Spartatool Support Team

Product features

Product Overview

NEU MASTER NTC0060 2-in-1 Electric Staple gun and Nail gun design for DIYers, ideal for many light-duty DIY projects. No compressor needed and the nail gun features a quick-release mechanism and an over-molded grip for convenient use. Kit includes a Brad Nailer Stapler, 200pcs 5/8'' brad nails and 336pcs 3/8" staples.The versatile machine can operate as a stapler to finish some projects such as thin ceiling tile and carpet padding installation and as a nailer to finish some projects such as shelving, trim molding installation,

• The high/low power feature helps you match the output force for the material.
• On/Off switch and contact safety prevents unintentional firing.
• The lightweight machine reduces worker fatigue.
• Soft- grip handle offers comfortable operation.
• Wide use to install insulation, ceiling tile, carpet padding trim molding, picture frame and other DIY hobby projects.

Warm Tips

NEU MASTER brings you professional tools for building & construction. This 2 IN 1 electric brad nailer is great for securing insulation plastic sheeting, carpets, and other fastening applications as well as devoted renovation, repair, DIY and hobby work at home. High-quality products you can rely on.

How to deal with these situations

Use the proper nails/staples for different projects