12 best bosch nail guns

Product description

The BOSTITCH BTFP12233 Smart Point 18GA Brad Nailer Kit is the perfect tool to be used for cabinetry, upholstery and paneling. It allows you to choose from trigger system and countersinking options that best meet your project needs. The Smart Point Technology allows for easy nail placement as a result of a smaller nose compared to current BOSTITCH nailers and no need to compress the contact trip to actuate the tool. It drives 18 GA brad nails from 5/8" to 2-1/8" length. Oil-free operation reduces the risk of oil stains. Tool-free jam release mechanism for easy nail removal, Dial-A-Depth control for precise countersinking of brad nails, along with a selectable trigger system for sequential or contact operation. Other Features: 1/4" air fitting, rear air exhaust, and belt hook with integrated pencil sharpener. Specifications: Magazine Angle is Straight, Magazine Capacity is 100, Magazine Loading: Side Load, No Mar Pad, Operating Pressure is 70-120 psi.Kit Includes: Nailer, 1/4" Air Fitting, Carrying Case and Extra No-Mar Tips

• SMART POINT TECHNOLOGY: Easy nail placement due to a smaller nose and no need to compress the contact trip to actuate the tool
• DRIVES: 18 GA Brad Nails from 5/8 inches to 2 1/8 inches length
• TOOL-FREE JAM RELEASE MECHANISM: For easy nail removal
• DIAL-A-DEPTH(TM) CONTROL: For precise countersinking of nails
• KIT INCLUDES: Nailer, 1/4 inch Air Fitting, Carrying Case and Extra No Mar Tips

User questions & answers

Question:	Does the kit come with a carrying case or not? Description contradicts
Answer:	Yes, there is a carrying case included.
Question:	Power source in the description says “corded electric”. I thought the power came from the air compressor. Why am I having to plug it in as well
Answer:	Trust me, it is powered by an air compressor. In fact I used mine yesterday. This is a great product. Just remember to use compressor oil in the nailer before each use.
Question:	Is the trigger the only thing that activates the nail being fired? Seems less safe that way
Answer:	No, the nose of the nailer must be depressed to activate the nailer.
Question:	My moldings require a very accurate placement of the nail. Will the "smart point" be worth the extra money over other nailers
Answer:	Absolutely. I found the placement of the brads to be very accurate using the smart point. I use this nailer all of the time.

Product features

A Tool That Will Sort You Out

The BOSTITCH Nail Gun, Brad Nailer comes easily allows you to work on home improvement projects with ease. This power tool also comes with a trigger system and tool-free jam release mechanism for easy nail removal.

Convenient on the Jobsite

This power tool by BOSTITCH also features a ¼ inch air fitting, rear air exhaust and belt hook with an integrated pencil sharpener, giving you the ultimate convenience. This tool provides an improved control and flexibility when fastening into various types of materials. Not only will you find this tool convenient, but also find it super easy to use.

Ergonomic and Comfortable

The design of this power tool makes is simple and easy for nail placement due to a smaller nose. In addition, the ergonomic carrying case so that you can carry this nail gun to your workspace.

Product description

The BOSTITCH BTF83WW 28 Degree Wire Weld Framing Nailer provides the user with power and efficiency. The low profile design allows the nailer to be used in small areas. The versatile trigger drive selector enables the user to select from single or multi-drive modes. The fastener’s depth is controlled by the tool-free depth drive adjustment. 840 In-Lbs of pressure is concentrated to powerfully send the fastener into the material. Power and versatility make this nailer an essential tool for the jobsite. Replacement to the BOSTITCH LPF21PL Nailer. 7 Year Limited Liability Warranty

• Low profile design with enhanced ergonomics and balance for comfort and control.
• Powerful enough to drive into engineered lumber.
• Industrial grade design for high volume framing and sheathing applications.
• Tool free features: depth of drive adjustment, selectable trigger for single drive or multi drive actuation modes, adjustable rafter hook.

User questions & answers

Question:	I have nails for a bostitch nail gun but don't have the gun. which gun will shoot s16d131gal nails the box says for use in n 16,n80s,n100s andn100s
Answer:	Must be the same degree, 28 gun & nails
Question:	Is this made in usa
Answer:	The BTF83WW is manufactured in Taiwan.
Question:	The technical details list the tool weight as 3 lbs is this correct for bostitch btf83ww wire weld framing nailer
Answer:	Tool Weight: 7.9 lbs
Question:	Is this 3 1/4" or 3 1/2" max length
Answer:	3” to 3 1/4 max length

Product description

The product is RND Head Framing Nailer. Easy to use. The product is manufactured in China. Magazine Loading - Bottom Load

The Bostitch F21PL Round-Head Framing Nailer is the ideal tool for framing, sheathing, subflooring, and bracing jobs. Perfect for professionals and weekend warriors alike, this nailer features a strong, lightweight magnesium body, quick-change nosepieces for plastic-collated and metal-connector nails, a 16-inch layout indicator, and more.

Designed to Match the Task at Hand

The recommended tool for use with HurriQuake disaster-resistant nails, the F21Pl has a patented feature that lets you set nail depth with the simple push of a button. For further convenience, quick-change nosepieces let you switch from plastic-collated framing nails to metal connector nails in seconds.

The high-capacity magazine holds up to 60 plastic collated 21-degree framing nails (2.0-3.5 inch) or 60 metal connector nails (1.5-2.5 inch). Its 16-inch layout indicator, located on the magazine, lets you know at a glance the correct distance between studs.

And with an adjustable rafter hook, you can conveniently hang the nailer on joists and rafters during work breaks.

Best-in-Class Power-to-Weight Ratio

The magnesium construction of the F21PL Round-Head Framing Nailer means this tool is light enough to use all day, while still being strong enough to reliably use again and again. It also means that this tool has the best power-to-weight ratio in its class: 1,050 in./lbs. to 8.1 pounds.

The Bostitch F21PL Round Head Framing Nailer works with a standard air compressor and is backed by a seven-year limited warranty.

About Bostitch

Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box

Framing nailer and two quick-change nosepieces.

From the Manufacturer

Magnesium plastic collated framing nailer / metal connector nailer. This new framing nailer drives 1-1/2- to 3-1/2-inch framing nails and comes with an interchangeable tip for placing nails accurately for metal connector applications. You get the benefit of two tools in one, no other competitive framer can match that. This light weight tool is also one of the most powerful framers with 1050 in./lbs. of driving power. It is able to tackle even tough engineered lumber applications. Tool also includes bolt on steel wear guards with integrated rubber skid pads, and printed magazine with scale and 16-inches-on-center layout feature. New smart trigger works as a sequential and bump fire trigger base on how you actuate the tool.

• Compressor/Air Tool Features: Fastener Collation,Fastener Depth Control, 1 1/2 inch to 3 1/2 inch framing nailer; 1,050 inch pounds of driving power; sequential and bump trigger
• 2 nailers in one: includes 2 quick change nose pieces, converts to framing or metal connector applications
• Lightweight magnesium housing; integrated rubber skid pads; rubber grip
• Includes 1 framing nailer; Power Source: Pneumatic
• 14 1/4 by 20 1/2 inches; 8.1 pounds.Operating Pressure:80 120 psi
• 1 1/2 inch to 3 1/2 inch framing nailer; 1,050 inch pounds of driving power; sequential and bump trigger
• 2 nailers in one: includes two quick change nosepieces, converts to framing or metal connector applications

User questions & answers

Question:	Is it true that the hammer is only "positive placement" for nails up to 2.5" long
Answer:	Yes, pp tip for nails up to 2.5" in length. Framing tip for up to 3.5"
Question:	How is it powered? Is it pneumatic or battery operated and/or use compressed gas cylinders
Answer:	It is pneumatic. I've been using a 6 gal Campbell Hausfeld compressor with 1/4" quick disconnects at about 90 - 100 psi for metal connectors and 16d nails and have never run out of air. I bought it mainly for the metal connector ability, which it does great, but is also great for down to 6d nails. Just turn down the pressure on the smaller nails.
Question:	Is it difficult to find nails for this hammer
Answer:	Metal connector nails need to be larger around to fit properly in the holes and have the shear strength. If the nail is longer than 2-1/2 inches the gun will not fire by design. I can only find the 1-1/2 21 degree nails on Amazon and Home Depot online. They are expensive, but surprisingly, I tried some 33 degree 1-1/2 inch nails in this gun and it fires normal. I don't see any wear as a result either. I would not try this with longer 33 degree nails because they would angle out of reach of the driver. The gun out performs my old Senco SN60 by a large margin, is lighter, but about an inch taller.
Question:	What is the difference between a round head and a clipped head nailer
Answer:	The round head is the traditional type nail you would find in a box or bin of nails. The clipped head is the round head clipped off to the width of the nail shank on two sides--does not had the holding power of the round head.

Product features

BOSTITCH F21PL

This 21-degree Plastic Collated Framing Nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a push button.

Features:

• Two nailers in one: includes two quick change nosepieces to convert tool to either framing or metal connector applications
• Patented push button adjustable depth guide sets nails to desired depths
• Lightweight magnesium design for durability
• Adjustable rafter hook allows users to hang tool on rafters and joists

Product description

No nailer does everything, but the Bostitch RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer comes close. Stop at any construction site and watchas the roofers fly through their job with ease. Chances are, they are using the no. 1 roofing nailer in the business--the RN46-1. This little tank is built to last even under extreme job conditions. Bostitch makes sure by dragging it 75-miles across asphalt shingles in its testing labs. Constructed of tough but light magnesium, the RN46-1 weighs only 4.8-pounds and delivers 410-inch-pounds of torque, and it comes with unique features like a single-action side-load canister that is quick and easy to load; a dry-fire lockout so it won't fire when it runs out of nails; carbide inserts wherever it might contact a work surface; skid-resistant pads; a tool-less shingle guide; and an adjustable-depth dial and an over-molded rubber grip.

• 3/4-inch to 1-3/4-inch coil roofing nailer with lockout mechanism prevents firing when empty. Operating Pressure : 70 -120 psi
• Adjustable depth control, full round driver, body and magazine wear guards, side-load canister
• Durable yet lightweight aluminum and carbide tips for long life. Magazine Angle - 15 Degree
• Patented single-action side load canister for fast, one-step nail loading. Adjustable shingle guide for quick shingle spacing
• Backed by seven-year limited warranty

User questions & answers

Question:	Will this coil nailer shoot nails with a 3/8" head
Answer:	Yes, the RN46-1 will shoot roofing nails with a 3/8" head...I think all standard roofing nails have a 3/8" head so any of them from 3/4" to 1 3/4" length should work fine... kd
Question:	can this gun be used to nail hardie siding
Answer:	I wouldn't. This gun can only shoot up to 1 3/4" roofing nails. If it were me, I'd get a siding gun and shoot some longer ring shank nails
Question:	Is this new gun
Answer:	Yes
Question:	Does it come with any type of warranty besides the one that is being offered
Answer:	I would check with the seller you plan to purchase from. It varies, depending on the seller. Some may offer 30-day warranties and others may only pass along manufacturer's warranty information.

Product features

BOSTITCH RN46-1 Coil Roofing Nailer

Lightweight and durable, the Bostitch RN46-1 Coil Roofing Nailer is an ideal tool for roofing, exterior drywall, insulation board, and fiber cement applications. With a patented side-loading canister, zero nail lock-out, easy depth of drive adjustments, and aggressive performance, the RN46-1 is a must-have tool for professional construction workers, builders, roofers, and anyone looking for long-lasting performance from a coil nailer.

Powerful and Accurate Nail Delivery

Amazingly powerful, the RN46-1 is capable of delivering 410 in./lbs. of force at 100 psi. The RN46-1 offers contact trip firing, with the ability to drive up to 100 nails per minute. Contact trip uses a bouncing motion along the workpiece and is great for working on large areas, such as roofs. For shingle work, the RN46-1 features an integrated, tool-less gauge used to control shingle spacing.

Get the Right Depth for the Job

The RN46-1 allows for fast, tool-free depth-of-drive adjustments with its integrated depth dial. The dial has five different settings for finding the perfect driving depth for the job, including flush mount driving, shallow driving, and countersinking.

Product description

The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8" to 2-1/8" which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
• Compatible with all DEWALT 20V MAX* batteries
• Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
• Tool-free selectable trigger for sequential or contact actuation modes
• Low nail lockout prevents dry firing and unwanted marks on the work material

User questions & answers

Question:	Is this a straight brad nailer for 5/8"-2" brads or an angled finish nailer 1-1/4 thru 2-1/2 finish nails
Answer:	THIS IS A STRAIGHT BRAD NAILER. 5/8" - 2".
Question:	Is this the same battery of 20v max drill
Answer:	Yes. To my knowledge all "20V Max" tools from DeWALT use the same battery. I have several tools and all the batteries work with all the tools.
Question:	Please confirm this kit includes the charging unit, battery and bag
Answer:	Mine came w/ those items since it is a kit & not tool only.
Question:	Can i nail 2x4 with this im building a garage
Answer:	Are you being serious? I really hope not! If you are, do not build anything! This gun is designed to fasten trim to walls like baseboard, casing etc. A "framing gun" is designed for "framing"... Dewalt has battery framing guns, they're about $100 more. But don't buy one. Call a pro, have them build your garage.

Product description

Drives 16 gauge finish nails from 1-1/4" to 2-1/2" length. Oil-free operation reduces the risk of oil stains. Tool-free jam release mechanism for easy nail removal. Dial-A-Depth control for precise countersinking of nails. Selectable trigger system for sequential or contact operation. 1/4" air fitting, rear air exhaust and belt hook with integrated pencil sharpener. Kit includes: Nailer, 1/4" air fitting, carrying case and extra no-mar tips. Tool weighs only 3.9 lbs. Product dimensions: 11.32"H x 12.5"L x 3.34"W.

• SMART POINT TECHNOLOGY: Easy nail placement due to a smaller nose and no need to compress the contact trip to actuate the tool.
• DRIVES: 16 GA Straight Finish Nails from 1 1/4 inch to 2 1/2 inch length.
• TOOL FREE JAM RELEASE MECHANISM: For easy nail removal.
• DIAL A DEPTH(TM) CONTROL: For precise countersinking of nails.
• KIT INCLUDES: Nailer, 1/4 inch Air Fitting, Carrying Case and Extra No Mar Tips.Operating Pressure:70 120 psi

User questions & answers

Question:	Is this made in the USA
Answer:	The BTFP71917 uses straight finish nails.
Question:	Will this take paslode or dewalt nails
Answer:	It has a no mar tip that is specific to this gun although it takes much less pressure on the tip to shoot the gun compared to other guns
Question:	Whats the degre angle on this nailer
Answer:	I disagree with the person who said they wont fit a wide face. I need glasses that are wider and with longer temples than normal. These can be adjusted and they fit me great. So if you have a large head, give these a try
Question:	Where can you buy the standard no-mar tips for this bostitch btfp71917 nailer
Answer:	Our regular safety glasses and safety sunglasses are currently not ANSI Z87.1 certified, but we are looking into the possibility of subjecting the glasses to this certification process in the near future. If OSHA / Z87 certification is a requirement for you, then our over-spec safety glasses might be of interest to you, as they are fully ANSI Z87.1 and OSHA certified. You can check them out here: https://www.amazon.com/dp/B071RSM598

Product description

The Freeman P4FRFNCB Pneumatic Framing and Finishing Nailers and Stapler Combo Kit with Canvas Bag (4-Piece) is an essential set of tools for professional construction contractors at the job site as well as DIYers tackling home improvement and repair projects. This collection of air powered nail guns and a stapler covers your framing to finishing needs and includes a 21 degree 3-1/2" Full Round Head Framing Nailer (PFR2190), 15-Gauge 34 Degree Angle 2-1/2" Finish Nailer (PFN1564), 18-Gauge 1-1/4" Brad Nailer (PBR32), and 18-Gauge 1-1/4" Narrow Crown Stapler (PST9032). The powerful framing nailer is specifically designed for tasks such as framing, sheathing, truss assembly, roof decking, subfloors, fencing, furniture, and assembling pallets and shipping crates. This durable nail gun features a one piece drive blade made of hardened steel and a lightweight magnesium body. Put the finish nailer to work on door and window casing, moulding, trim, chair rails, cabinetry, and other fine finish applications. The 34 degree angle of the magazine makes it easy to access corners or tight spaces, and the dual mode trigger allows to easily switch between sequential or bump firing. When the focus is on accuracy, use the sequential mode. When speed is the name of the game, engage the bump fire option and get to work. The brad nailer is ideal for interior and exterior finish and trim, furniture, cabinetry, picture frame assembly, and hobbies and crafts. An oil-free design eliminates the need for regular maintenance and prevents stains on your work surface. The narrow crown stapler is perfect for projects such as decorative trim, cabinetry, cabinet backing, and hobbies and crafts. The no mar safety tip prevents damage to your work surface, ensuring professional results. A canvas carrying bag, air tool oil, and adjustment tools are included. The Pneumatic Framing and Finishing Nailers and Stapler Combo Kit with Canvas Bag (4-Piece) will allow you to complete a wide variety of home improvement and repair projects quickly and easily.

• Powerful Combo: This kit features 4 of Freeman's most useful pneumatic nailers to cover all your framing and finishing needs: a framing nailer, a finish nailer, a straight brad nailer, and a narrow crown stapler. The kit includes a rugged canvas carrying bag.
• Heavy Duty and Fine Detail: The nailers included in this combo kit are ideal for everything from heavy duty work like subfloors, roof decking, fencing, and pallet building to fine detail work like cabinetry, crown moulding, window casings, base boards, and trim.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	Any suggestions on a pancake compressor for these guns
Answer:	Mines not a pancake compressor, but it is around the same size. I have a 2.6 gallon 2 HP compressor that works beautifully with these guns. It fills to 120 psi, and I have a regulator on the compressor that allows 80-90 psi through, depending on the gun I am using at the time. I can usually shoot 20-30 nails before it has to get more pressure built up, but never dropping below 90 psi. Since the tank is so small, it takes only seconds to fill again. I'm not sure what the rules are on linking to other items, but I bought the compressor off Amazon.
Question:	should you use a water separator or oiler with nail guns
Answer:	The only specification with the Freeman nail guns is to provide oil to the system. So I have only been oiling since water is not a problem in the air system I'm using. Some of the air supply systems I have used previously needed a water separator. If you are not sure about the amount of water in your system a water separator might be a very good addition.
Question:	Has anyone had trouble with these nail guns working right
Answer:	I have been using my framing gun 3 days out of the week as I continue to remodel my house. I have used the 15 gauge and 18 gauge guns just as much without any problems. I don't know if it's related to the setup and continuos maintenance but I have a filter on the compressor and use the air tool oil. I never exceed 120 psi on my framing gun and I adjust to 75 to 90 for the other guns. I continue to have good service from these tools.
Question:	what kind of nails does it use
Answer:	I use Hitachi fasteners. GEt mine at Lowe's. Used the Stapler and Angle Finish Nailer today. Built our 16'x16' deck with the Framing nailer. Great set of tools. LOOK here: http://www.lowes.com/Search=hitachi+nails?storeId=10151&langId=-1&catalogId=10051&N=0&newSearch=true&Ntt=hitachi+nails#!&Ns=p_product_price|0&page=1&N=0&N=2z8vj&N=2z8vk&N=2z8vl&N=2z8vm

Product features

PFR2190 21-Degree 3-1/2-Inch Framing Nailer

Adjustable depth for various applications.

Air filter/anti-dust cap keeps interior components debris free, extending tool life.

360-Degree adjustable exhaust allows user to direct air away from debris.

No-mar tip eliminates damage to working surfaces.

Oil-free design.

Anti-dry fire mechanism reduces damage on internal components.

Magnesium construction lightweight tool and great for extended use.

PFN1564 15-Gauge 2-1/2-Inch 34-Degree Finish Nailer

Adjustable depth for various applications.

Air filter/anti-dust cap keeps interior components debris free, extending tool life.

360-Degree adjustable exhaust allows user to direct air away from debris.

No-mar tip eliminates damage to working surfaces.

Oil-free design.

Quick jam release nose.

Dual-mode trigger easily allows for single or sequential firing.

PBR32Q 18-Gauge 1-1/4-Inch Straight Brad Nailer

Adjustable depth for various applications.

Air filter/anti-dust cap keeps interior components debris free, extending tool life.

360-Degree adjustable exhaust allows user to direct air away from debris.

No-mar tip eliminates damage to working surfaces.

Oil-free design.

Quick jam release nose.

PST9032Q 18-Gauge 1-1/4-Inch Narrow Crown Stapler

Adjustable depth for various applications.

Air filter/anti-dust cap keeps interior components debris free, extending tool life.

360-Degree adjustable exhaust allows user to direct air away from debris.

No-mar tip eliminates damage to working surfaces.

Oil-free design.

Quick jam release nose.

Product description

The new DEWALT DWFP12231 18 gauge, 2-Inch Brad Nailer Kit is an excellent tool with many enticing qualities. It features a long life maintenance-free motor to keep from staining the work surface. The magnesium body delivers a strong and lightweight design. It also features a tool-free depth -of-drive adjustment with detents for proper setting of nail heads, along with a tool-free jam release mechanism for easy nail removal. The rear exhuast helps to keep contaminates away from work. This unit is made to drive 18 gauge nails from 5/8" to 2" in length, with a sequential style trigger, and 100 nail magazine capacity. This unit has a removable non-marring nose tip with on tool storage, and an integrated rubber grip for improved comfort and anti-slip grip. It also has an adjustable belt hook which allows the tool to be kept near the user. This kit also includes carrying case and owner's manual. Refer instruction manual before use. A compressor is required and not included.

• Long life maintenance-free motor to keep from staining the work surface
• Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
• Tool-free jam release mechanism for easy nail removal
• Rear exhaust to keep contaminates away from work. Operating pressure 70 - 120 psi
• Drives 18 gauge nails from 5/8" to 2" length. Power Source: Pneumatic. Power Tool Type: Pneumatic. Note: There are no nails included
• Compressor is required to use this product but is not included

User questions & answers

Question:	Can someone recommend an air compressor that would power this nailer? I don't know a lot about tools and don't want to buy larger than i need
Answer:	: A Husky 4 gallon portable will run three of these nailers. I believe it cost me $250.00. It's pretty quiet. Both of these cost less than a battery one
Question:	What is the difference between 18 gauge brad nailer and 16 gauge finishing nailer? I need to install trim, build bookcase and install decking floor
Answer:	Brad nails are formed from a fine 18 gauge wire, while finish nails are made from heavier 16 or 15 gauge wire. Finish nails are the correct choice for fastening larger crown and baseboard trim, brad nails are used to install smaller trim to help prevent splitting and to promote a cleaner looking job with less touch-up work after the nailing is done.
Question:	Would I need to purchase anything else (battery) in order to use? I know absolutely NOTHING about power tools
Answer:	Hello, Thank you for writing ACME Tools. The DWFP12231 Brad Nailer is a Pneumatic tool so you will have to use an Air Compressor and a hose with the proper fittings. Other than that, this unit is very straight forward and easy to use.
Question:	what is the voltage
Answer:	The voltage is 765 kV and it is also powered by two Siemens & Halske alternators rated 30 hp (22 kW), 2 kV at 120 Hz and uses 200 series-connected Gaulard 2-kV/20-V step-down transformers provided with a closed magnetic circuit, one for each trigger. Hope this helps.

Product features

DEWALT DWFP12231 18-Gauge 2-Inch Brad Nailer Kit

Product description

This CRAFTSMAN V20 MAX 18GA cordless finish nailer's cordless design eliminates the need for compressors, hoses, or costly Gas cartridges. The motor delivers consistent power firing in various weather conditions and materials. The extensive runtime on a single battery and Fast shot speed allow for less downtime on the jobsite. The single tool-free depth setting makes adjusting your nail depth quick and simple, while the other tool-free settings make potential nail jams or stalls easy to fix. The cordless finish nailer is lightweight and well balanced, making this product very comfortable to use for prolonged time.

• CRAFTSMAN V20 MAX cordless nailer drives adhesive collated 18 gauge finish nails
• Fully cordless design eliminates the need for compressors, hoses or costly Gas cartridges
• Provides consistent firing power in various climate conditions and materials
• Tool-free depth settings for quick set up and consistent results
• Tool free jam and stall settings for ease of use and improved efficiency
• Lightweight with optimal center of gravity provide optimal balance and comfort in hand during use
• Contoured overmolded handle for added comfort during use

User questions & answers

Question:	Will DeWalt battery work
Answer:	No, the CMCN618C1 should only be used with the CRAFTSMAN battery.
Question:	Can this be used to attach wall panel to an old shipping pallet? I'm building a bar. Thanks
Answer:	Absolutely yes! I use this one every single day for my projects, shiplap, pallets, plywood, crown molding, etc. just be sure to get the right nail size and go ahead!!
Question:	Can this tool work with the Black and Decker 20 volt battery for the Matrix system
Answer:	No. The batteries for DeWalt, Black & Decker, Porter Cable, and Craftsman do not cross brands and are not compatible.
Question:	Does this unit come with a battery and charger
Answer:	Yes, The CMCN618C1 comes with one battery and one charger.

• 【2-IN-1 Tool】No cords, no limits! KIMO cordless brad nailer proves that you don’t need noisy air compressor or tangles of hose anymore to drive brads like a pro. KIMO only designs the best nail guns and makes it possible for you to have both nailing and stapling function simultaneously at a modest price. (Suitable for 18 GA nails: 3/4’’to 2’’, and 18 GA staples: 3/4’’to 1-5/8’’)
• 【Dual Modes & Convenient Operation】Easily alternate between sequential and contact-actuation with our dual-mode toggle switch, which means you can fire a single brad with each trigger squeeze or a series of them by bumping the contact element at a speed of 80 nails/min. Adjust firing depth with the rotation knob at the top of the gun, making it easy for a wide range of materials and different needs in nailing.
• 【Proudly Present KIMO Li-ion Technology】For over 25 years, KIMO has made significant progress in the 1,000-Charging Cycle Test that ensures each KIMO lithium-ion battery is more powerful and lives longer than others. With this 2.0Ah battery freshly charged, driving a total 700 brads into woods, and the tool doesn’t falter. Go with KIMO, and no worries about dying cells anymore!
• 【Lightweight Design & LED Lighting】Tool weight matters. Think about it; if you are installing crown molding overhead, a few extra pounds could make the difference between aching your shoulder and a pain-free job. KIMO nailer/stapler weighs in at a slight 6 lbs. Also, a pair of front-positioned LED lights provide a bit of aid besides the gun when nailing in a dark place.
• 【Compact and Comprehensive Set】The compact size lets the nailer fit into tight spaces and work in awkward positions where it might be difficult to swing your hammer and drive in a tiny nail. Now, a simple one-click helps you get the most valuable toolkit. Each 18GA Brad Nailer/Stapler Kit comes with 1* 20V 2.0Ah Lithium-ion Battery, 1* Fast Charger, 700 PCS 18GA nails, 300 PCS 18 GA crown staples, and 1*Allen Wrench for releasing jams.

Product features

Mind-Blowing Cordless Power and Unrivaled Runtime

Founded in the 1990s, KIMO has grown from a small workshop to a global enterprise that develops, designs, manufactures, and sells Lithium-Ion Power Tools in the past 25 years. As a capabilities-driven company, KIMO has dedicated to providing robust one-stop solutions to users around the world. Due to the breakthrough we made in lithium-ion technology, KIMO has been creating a single-battery system to power every 12V/20V KIMO tool. Professionals absolutely love the unrivaled runtime of the power, and creative DIYers enjoy the versality of our tools. Whoever you are, KIMO's got your back!

KIMO 20V 2-IN-1 Cordless 18GA Brad Nailer & Stapler

Have you ever dreamed of the sheer ease of remolding your home or tackling weekend building projects with a nail gun? The KIMO 2-in-1 Brad Nailer should be your entry point. The battery-powered nailer/stapler delivers 80 pieces of 18-gauge brads/staples per minute, being suitable for finish work, trim, crown, baseboards, and other light materials. The patented air cylinder makes this nailer a solid performer with plenty of power for trim and other finish carpentry tasks. KIMO kindly prepare a juicy 2.0Ah lithium-ion battery in the package to ensure prolonged runtime. Be a smart investor, you will never go wrong with KIMO.

Lightweight and Compact Design

While no battery-powered tool can ever be considered lightweight and compact, the KIMO is one of the lightest cordless nailers on the market, at just 5 pounds (minus the battery). It’s expected to stay for long in your hands and attached comfortably to your belt.

Decent Nail Capacity

KIMO brad nailer features a 2-in-1 bottom-load magazine that is compatible with either 100 pcs 18 gauge brad nails (3/4” to 2”) or 1/4” narrow crown staples (3/4” to 1-5/8”) for maximum versatility.

No Cords, No Limits

Are you ready to work without the hassle of using gas, compressor, and hose? Have you ever wondered to tackle jobs both large and small with the features of a pneumatic and the freedom of cordless? No matter you are professionals or artistic fanatics, you may find KIMO brad nailer a judicious choice.

Adjustable Depth of Drive

Tool-free depth adjustment for flush and precise countersinking of nails. KIMO is able to drive 18 GA brad nails from 3/4 in to 2 in, making the nailer ideal for fastening decorative molding, casing, kitchen crown, and shoe molding.

1400 Nails per Charge

Charging in only 45~60 minutes, the battery fires up to 1400 shots per charge with a 20V 4.0Ah battery and fastens 80 nails every minute, so you can get the job done faster.

Dual LED Lighting

Dual built-in LED lights located near the firing head is effectively bright to illuminate all operation especially for you in dark working environment, ensuring precise control in poor light.

Moulding

The narrow body tool is easy to handle and work in tight space, making it ideal for floor moudling.

Furniture Building

A nice pal for your detailed furniture building and assembly, reducing the risk of damage thin pieces of trim.

Frame Triming

The lightweight and compact design ensures the safety operation overhead.

Product description

The Makita 18V LXT Lithium-Ion cordless pin nailer, 23 GA. (Model XTP02Z, Tool only), is a hose-free solution for installing casings, decorative trim, molding and baseboards. The XTP02Z is compact and powerful, and drives six different pin Nail lengths (5/8”, 11/16", ¾”, 1", 1-3/16", 1-3/8") with a magazine capacity of up to 120 pins. Using the 18V LXT 5.0Ah battery, The XTP02Z will drive up to 5, 300 pins on a single charge. It's part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star protection Computer controls. Star protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and compact Lithium-Ion batteries with the Star symbol on the battery indicating Star protection inside.

• Refined firing mechanism reduces recoil; reduces force required on the work surface when driving pin nails
• Drives 6 different lengths, 5/8", 11/16", 3/4", 1", 1-3/16" And 1-3/8", of 23 gauge pin nails (tool does not work with 1-1/4" Pin nails)
• Magazine capacity up to 120 pin nails
• Anti-dry Fire mechanism engineered to prevent driving blanks and damage to work surface
• "Tool-less" Depth adjustment for precise flush and Countersink finish
• Cordless for increased convenience; eliminates the need for a compressor and air hose

User questions & answers

Question:	What size battery do you buy in thextpo2z pin nailer cordless tool
Answer:	I guess it would depend on the job size you are using it for. I only use it for small jobs, so I only use a two hour amp battery. I guess if you had a larger job you would use an accordingly larger battery. As long as is the 18 V Makita battery.
Question:	will this gun shoot a slightly headed 23ga nail
Answer:	Probably not ...gun is very temperamental emend with typical headless pins
Question:	does it take a special charger for new 6.0 batterys
Answer:	Not sure but wouldn’t think so...more a battery question than pin nailer related
Question:	Anybody that have trouble with this gun have issues taking back within 3 year warranty? Thanks for any help
Answer:	Yes, i had issues with it jamming consistently so i returned it. A new one was sent and same exact issue. These guns have multiple design flaws and operational issues. No you are not losing your mind. Unfortunately this is not a good product from makita

Product features

Makita XTP02Z 18V LXT Lithium-Ion Cordless 1-3/8" Pin Nailer, 23 Ga., Tool Only

The Makita 18V LXT Lithium-Ion Cordless Pin Nailer, 23 Ga. (model XTP02Z, tool only), is a hose-free solution for installing casings, decorative trim, molding and baseboards. The XTP02Z is compact and powerful, and drives six different pin nail lengths (5/8”, 11/16", ¾”, 1", 1-3/16", 1-3/8") with a magazine capacity of up to 120 pins. Using the 18V LXT 5.0Ah battery, the XTP02Z will drive up to 5,300 pins on a single charge.

XTP02Z Nail Loading

Drives 6 Different Lengths of 23 Gauge Pin Nails

• 5/8"
• 11/16"
• 3/4"
• 1"
• 1-3/16"
• 1-3/8"

Does Not Work With 1-1/4" Pin Nails

• 📢Friendly customer service: we provide new replacement instead of repairing.
• For Free -- 800pcs nails and 200pcs staples included.
• 🔰【Spiral-Drive Technology And Cordless Design】With its spiral-drive technology, the cordless brad nailer stapler deliver more full-power shots than comparable corded tool without the hassle of using cord, gas and compressor.
• 🔰【Up To 1100 Shots Per Full Charge】Powered by NEU MASTER 20v MAX rechargeable Lithium-Ion battery which has passed 1000 charging cycle test, the electric nail gun/staple gun can deliver up to 1100 full power shot per full charge.
• 🔰【2-in-1 Versatile Battery Brad gun/Staple gun】It drives 1/4'' crown staple from 5/8'' to 1'', and 18 gauge brad nail from 5/8'' to 1-1/4'', which makes its ideal for fastening lightweight decoration trim, installing sheets of insulation, home repair while not recommended for quarter round installation or heavy duty construction projects.
• 🔰【Flawless Finish And User Friendly】Non-Marring rubber nose provides a complete finish. Oversize trigger and an ergonomic handle to combat grip fatigue during strenuous or time-consuming tasks.
• 🔰【LED Light And Belt Hook】With LED lights and the belt hook, you can illuminate work area and take your cordless staple gun/nail gun anywhere to get the job done.

User questions & answers

Question:	Why is it not recommend for 1/4 round install
Answer:	It should work for shoe mould.
Question:	Hi, are the brads long enough for crown molding
Answer:	Dear Steven, No. The brads used for this cordless brad nailer NTC0023 may be too short to used for crown molding. If you have any issues please feel free to contact [[email protected]] and we will reply to you ASAP. Spartatool Support Team
Question:	Will this unit work with "Headless" brads
Answer:	It works with staples and brad nails. Head is rather small on brad nails already but if you are talking about finishing nails or pins then no it won’t work. If you’re looking for something to staple fabric or nail MDF then it’s a really good tool.
Question:	Made in china
Answer:	Hello Customer, Yes. As a new seller, we take full responsibility for our customers, and our NEU MASTER products are backed with 2 year warranty. Please feel free to contact us via [[email protected]] if you have any issue and we will answer you ASAP. Spartatool Support Team

Product features

For dedicated crafters and DIYers who don’t want to be constrained to gas, cord or air compressor, the NEU MASTER NTC0023 cordless nail gun/staple gun is the tool to use. With its spiral-drive technology powered by a NEU MASTER 20V MAX Lithium-Ion battery NTC0023-18 is ready to go to work without the hassle of using gas, compressor and cord. Its delivers up to 1100 shots on a single charge. Its drives 1/4'' crown staple from 5/8'' to 1'', and 18 gauge brad nail from 5/8'' to 1-1/4'', which makes it ideal for fastening lightweight decoration trim, installing carpet, installing sheets of insulation, repair work, and more. Kit includes a Brad Nailer Stapler, a 20-Volt li-ion battery, a battery charging unit, 200pcs 3/4'' staples, 400pcs 5/8''brad nails and 400pcs 3/4'' brad nails.

• 100% battery powered; eliminates the hassle of using gas, compressor, and cord
• Battery is compatible with all NEU MASTER 20V cordless tool
• spiral-drive technology maximizes runtime and durability
• Delivers up to 1100 shots on a single charge
• Magazine holds up to 100 brad nails or staples
• Drives 1/4'' crown staple from 5/8'' to 1'', and 18 gauge brad nail from 5/8'' to 1-1/4''
• LED lights illuminate work area
• Ergonomic handle for comfort and control
• Power adjustment dial and oversize trigger
• Features a quick-release mechanism
• Non-marring nose provides a flawless finish
• Belt hook for user convenience
• Great for fastening lightweight decoration trim, installing carpet, installing sheets of insulation, repair work, and more.