13 best battery nail guns

A battery nail gun is a type of power tool used for driving nails into various materials, including wood, plastic, and sometimes even metal. These tools are commonly used in construction, woodworking, and home improvement projects. Here are some key points about battery nail guns:

  1. Operation: Battery nail guns are part of the family of nailers and are specifically designed for ease of use. They operate by using a rechargeable battery to provide the necessary power to drive nails into surfaces.

  2. Brad Nailers: Brad nailers are a specific type of nail gun that uses thin, small-gauge nails called brads. These nail guns are suitable for delicate tasks like attaching trim, molding, and other finishing work. They leave smaller holes and are less likely to split the wood.

  3. Cordless Convenience: Battery nail guns are cordless, which means they offer greater mobility and flexibility compared to pneumatic nail guns that require an air compressor and hoses. This makes them especially handy for jobs where you need to move around or access tight spaces.

  4. Rechargeable Batteries: These tools typically use lithium-ion rechargeable batteries.The battery capacity and voltage can vary depending on the model and brand, with higher voltage batteries offering more power and longer runtimes.

  5. Safety Features: Most battery nail guns have safety features such as trigger locks and anti-dry fire mechanisms to prevent accidental firing and protect the tool from damage.

  6. Versatility: Battery nail guns can be used for a wide range of tasks, from framing and sheathing to installing baseboards and crown molding. Some models even support different nail sizes and types, offering versatility for various projects.

  7. Portability: Since they don't require a constant source of compressed air, battery nail guns are easier to transport to job sites. This can be especially useful for DIY enthusiasts and contractors who work on location.

  8. Maintenance: While battery nail guns are generally low-maintenance compared to pneumatic models, they still require regular care. This includes cleaning, lubricating, and occasional servicing of the tool and battery to ensure optimal performance and longevity.

  9. Cost: Battery nail guns can vary in price depending on their features and capabilities. High-end models with advanced features may be more expensive, but they offer greater convenience and efficiency.

In summary, battery nail guns, including brad nailers, are versatile and convenient power tools used in various construction and woodworking applications. They are cordless, easy to use, and suitable for a wide range of tasks, making them a popular choice among both DIY enthusiasts and professionals in the construction and home improvement industries.

Below you can find our editor's choice of the best battery nail guns on the market
  

Milwaukee 2746-20 M18 FUEL 18 Gauge Brad Nailer (Tool Only)

MILWAUKEE'S

Based on 266 reviews Check latest price

Product description

The MILWAUKEE M18 FUEL 18ga Brad Nailer delivers peak productivity at the jobsite, providing users with unmatched nailing performance without the hassle of a compressor and hose. Leveraging a nitrogen air spring mechanism, the finish nailer enables users to consistently sink nails to the proper depth in hard and soft woods while leaving clean nail holes matching the head of the nail. The combination of Milwaukee's POWERSTATE Brushless Motor and REDLINK PLUS Intelligence delivers users with unmatched fire rate with zero ramp-up time keeping them efficient throughout their day.

  • This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box

User questions & answers

Question: How many year warranty for this item
Answer: I have been told the 5 year warranty does not apply if it comes in an unmarked box...which it says is the case in the description...along with it being refurbished
Question: What length nails does it take
Answer: Hello, 5/8 to 2-1/8 nails. Thanks
Question: How wide is the dent in the wood around the nail when sinking below the surface
Answer: If it is adjusted right, no dent
Question: What are the recommended nails (size and other criteria) to use with this tool? I Milwaukee cust service this week and got no response
Answer: Nail Gauge 18. Maximum Fastener Size : 2-1/8 in Minimum Fastener Size : 5/8 in

DEWALT 20V MAX Cordless Brad Nailer Kit, 18GA (DCN680D1)

DEWALT

Based on 987 reviews Check latest price

Product description

The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8" to 2-1/8" which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

  • 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
  • Compatible with all DEWALT 20V MAX* batteries
  • Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
  • Tool-free selectable trigger for sequential or contact actuation modes
  • Low nail lockout prevents dry firing and unwanted marks on the work material

User questions & answers

Question: Is this a straight brad nailer for 5/8"-2" brads or an angled finish nailer 1-1/4 thru 2-1/2 finish nails
Answer: THIS IS A STRAIGHT BRAD NAILER. 5/8" - 2".
Question: Is this the same battery of 20v max drill
Answer: Yes. To my knowledge all "20V Max" tools from DeWALT use the same battery. I have several tools and all the batteries work with all the tools.
Question: Please confirm this kit includes the charging unit, battery and bag
Answer: Mine came w/ those items since it is a kit & not tool only.
Question: Can i nail 2x4 with this im building a garage
Answer: Are you being serious? I really hope not! If you are, do not build anything! This gun is designed to fasten trim to walls like baseboard, casing etc. A "framing gun" is designed for "framing"... Dewalt has battery framing guns, they're about $100 more. But don't buy one. Call a pro, have them build your garage.

Ryobi P320 Airstrike 18 Volt One+ Lithium Ion Cordless Brad Nailer (Battery Not Included, Power Tool Only)

RYOBI

Based on 1 reviews Check latest price

Product description

The Ryobi P320 brad nailer has comparable power to some gas-powered nailers and the convenience of a cordless power tool. Any nailing job you may need to perform around the house, from installing roofing tiles to reinforcing joints, can be accomplished with the P320. On a single charge of a 4 amp hour battery from Ryobi’s One+ system, you can fire up to 700 nails up to 50 millimeters long. Adjust your depth with an onboard dial so you do not have to worry about fiddling with extra tools. Be sure to see what you are working on with the built-in LED lighting, and keep it handy with the attached belt clip. Get what you need to get done with the P320. It’s built for work, so get to it.

  • Drives up to 1700 nails per charge
  • No compressors, hoses or pricey gas cartridges required. Cordless design offers both convenience and superior performance.
  • Convenient adjustment dial regulates air pressure for optimum results.
  • Low-nail indicator to quickly and easily see when it is time to reload
  • Includes: 18-V ONE AirStrike 18-Gauge Cordless Brad Nailer, Battery sold separately

User questions & answers

Question: How does this perform on solid hardwood like oak or maple? My 18g Paslode performs great but I'm tired of fuel cells, and expensive repairs
Answer: How much do you spend on repairs and fuel cells? do the math and see if it make sense for you. There is no ongoing cost for this exept nails and it seems to work pretty good, Im sure it would preform well on solid hardwood (it will go through a formica countertop no problem and into wood below it). It's a semi precision tool and it wont take much abuse, but overall it really has alot more power than i thought it would. I'd say go for it.
Question: What kinda nails does it use, e.g. Bostitch, Freeman, etc
Answer: I cannot get my 320 to work with Porter Cable 16 gauge x 2" "Straight Finish Nails." They have a slight "head" to the nail and it seems to stop the gun from working. I've tried adjusting the pressure with no effect.
Question: which battery and why doesn't Amazon have a link for that under Frequently bought together
Answer: I don't know how you can do the whole house with one battery, I change batteries every 10 minutes, I would like to know what battery you have so I can order it
Question: Will it work with 16D framing nails
Answer: No it will not. It only works with 18 gauge straight brads. Ignore stop_go_boom's response, as the P325 uses 16 gauge brads, and 16 gauge is not the same as 16D. Look for a framing nailer. This is more suited to light trim work.
Question: What power does this brad nailer run on
Answer: This nailer runs on Ryobi 18v one+ battery.
Question: can you used it for framing
Answer: Not for Framing this is a finish nailer
Question: Can you adjust for the depth the nail goes into the wood
Answer: Yes. There is a dial which works easily. I love this brad nailer!
Question: Can you adjust for the depth the nail goes into the wood
Answer: After speaking with the vendor, They confirmed that you can adjust nails anywhere between 5/8 - 2 in. What you would do is dial the knob that's on the right side of the tool.

Metabo HPT Cordless Pin Nailer Kit, 18V, 23 Gauge, 5/8" up to 1-3/8" Pin Nails, 3000 Nails Per Charge, Compact 3.0 Ah Lithium Ion Battery, Lifetime Tool Warranty (NP18DSAL)

Based on 94 reviews Check latest price

Product description

The NP18DSAL Pin Nailer is taking fine finish carpentry to the next level. No longer will you have to worry about hoses and compressor for your 23-gauge pin nailer needs.



Please note, it is necessary to buy high quality pins to ensure the tool works as expected. Pins with lower grade metal can be less rigid and bend at the point of entry or bend at the point of impact from the tool. Each of these scenarios can cause the tool to jam or the pin not to penetrate the wood as anticipated, especially at longer lengths. Metabo HPT pin nails are manufactured to higher tolerances and perform better in our nailers. For best performance, use the following genuine Metabo HPT pins, available on . 1) 23000SHPT (5/8") 2) 23001SHPT (3/4") 3) 23002SHPT (1") 4) 23003SHPT (1 3/16") 5) 23004SHPT (1 3/8")



It is equipped with a built-in counterweight that virtually eliminates all recoil, while reducing the force needed to actuate the tool.



It also features a no-push work contact safety tip that reduces marring to provide a clean finish.



Additional features include tool-less depth of drive adjustment, dry-fire lockout, on-tool battery indicator, belt hook, soft grip handle, and tool body rubber bumpers.



The NP18DSAL pin nailer is capable of driving approximately 3000 pins with Metabo HPT's Compact 3.0Ah battery, allowing you to efficiently and comfortably complete any task.



This 23-Gauge cordless pin nailer drives pins in lengths of 5/8", 3/4", 1", 1-3/16" and 1-3/8".



Can be used to produce nearly invisible holes for a variety of applications including cabinets, paneling, small molding and trim, glazed bead, craft work and picture frame assembly.



Covered by Metabo HPT's Lifetime Lithium Ion tool .



Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT

  • INCLUDES: NP18DSAL cordless pin nailer, Compact 3.0Ah Lithium Ion Battery, Fast Charger, Contractor Bag, Safety Glasses, 3mm Hex. Bar Wrench
  • AWARDS: Pro-Preferred for Pneumatics 2014 - 2019 per Builder and Developer Magazine
  • NAIL GRADE: Use genuine Metabo HPT pin nails for optimal performance. See note below
  • FASTENERS: Accepts 23 gauge nail lengths 5/8", 3/4", 1", 1-3/16", and 1-3/8"
  • DEPTH ADJUSTMENT: Tool-less depth of drive adjustment for a professional finish every time
  • NAILS PER CHARGE: Capable of driving 3000 nails per charge using Hitachi or Metabo HPT compact 3.0Ah li-ion battery
  • LED: High-luminescence LED light is handy when working in low light areas
  • NOSE: No-push safety nose tip reduces marring and provides a clean finish

User questions & answers

Question: which 18v hitachi battery does it use? I have several for other tools, and would like to know if i will need a special battery and charger
Answer: Hi there! No need for a different battery or charger - and Hitachi/Metabo HPT 18V Lithium Ion Slide-Type battery will work! Hope this helps.
Question: Do you need an air compressor
Answer: This does not use an air compressor. Please see below. Have a great day. Built-in counterweight greatly reduces recoil Powered by a Compact 3.0Ah Lithium Ion battery that is 3/4" shorter and .6 lbs lighter than a conventional 3.0Ah battery for complete portability Freedom from cumbersome air hose and compressor saves time in setup, during applications, and in jobsite clean up Slim nose design allows nailing into the grooves of any trim No-push safety nose tip reduces marring and provides a clean finish Tool-less depth of drive adjustment for flush drives into various materials Quick clear nose with tooled jam release for easy maintenance and reduced downtime High-luminance LED light is handy when working in low light areas Ergonomically formed soft grip handle provides comfort and ensures a secure hold Automatic power shut off after 30 minutes of inactivity, for added safety Dry-fire lockout for assured nail placement and preventing damage to work surface Low battery indicator light allows the user to see battery power status to prevent unexpected downtime Detachable no-mar nose cap protects work surfaces from scratches or indentations Integrated belt hook can be mounted on either side of the nailer to accommodate left or right handed users Straight magazine holds 120 23-gauge pins from 5/8" up to 1-3/8" in length Capable of driving 3,000 nails per charge using Hitachi's Compact 3.0Ah Li-Ion battery (one battery is included in the kit, additional Compact 3.0Ah Li-Ion batteries sell for only $39.99 or $29.99 for a 1.5Ah Li-Ion battery) Tool body rubber bumpers protect the tool and any surface from damage (2) No-mar nose caps for flat or angle pin driving Compatible with all Hitachi 18V Lithium Ion slide type batteries Lightweight at only 4.4lbs for balance, maneuverability and minimal user fatigue while ideal for overhead and extended use applications
Question: Pin will not discharge
Answer: If it is firing, but the pin is not discharging, there could be a jam. If it doing nothing when you fire it then you are either low of pins or it may need to be repaired.
Question: which 18v hitachi battery does it use? I have several for other tools, and would like to know if i will need a special battery and charger
Answer: Compact 3.0Ah Lithium Ion Battery BSL1830C (339782)

Product features

2) NO-MAR NOSE CAPS

For flat or angle pin driving

TOOL-LESS DEPTH ADJUSTMENT

For a professional finish every time

LOW BATTERY INDICATOR

Allows the user to see battery power status to prevent unexpected downtime

STRAIGHT MAGAZINE

Holds 120 23-gauge pins in lengths of 5/8", 3/4", 1", 1-13/16" and 1-3/8"

Metabo HPT Cordless Finish Nailer Kit, Unique Air Spring Drive System, 18V - 3.0 Ah Lithium Ion Battery, Brushless Motor, 16 Gauge, Lifetime Tool Warranty (NT1865DMS)

Metabo HPT

Based on 41 reviews Check latest price

Product description

The NT1865DMS 16-Gauge Cordless Finish Nailer allows the user to move easily around the job site without hoses or compressors



Equipped with Brushless motor technology and powered by a Compact 3.0Ah Lithium Ion battery, it is capable of driving up to 1,500 nails per charge.



It employs a unique air spring drive system (similar to Metabo HPT's pneumatic line) that uses compressed air to drive each nail resulting in zero ramp up time, increased shooting speed, recoil that feels like a pneumatic nailer, quicker response time between drives, better flush driving-even at an angle, and easy main10ance if the need should arise due to fewer parts to manage.



It also features a low battery indicator, selective actuation, tool-less jam release, tool-less depth of drive, variable position belt hook and LED light .



This 16-Gauge cordless finish nailer drives nails from 1" to 2-1/2" in length and can be used for a variety of applications including chair rail, install molding, cabinetry and other finish applications.

  • 16 Gauge cordless finish nailer
  • INCLUDES: NT1865DMS Cordless Finish Nailer, Compact 3.0Ah Lithium Ion Battery BSL1830C, Charger, Contractor Bag, Safety Glasses
  • APPLICATIONS: For molding install, cabinetry, and finish work
  • FAS10ERS: Accepts 16 gauge 1-in to 2-1/2-in straight finish nails
  • POWER: 1,500 nails per charge using Metabo HPT's new compact 3.0 Ah Li-ion battery
  • MAGAZINE: Straight magazine holds 100 16-gauge fas10ers from 1" up to 2-1/2" in length
  • DEPTH ADJUSTMENT: Tool-less depth of drive adjustment for flush drives into various materials

PORTER-CABLE 20V MAX Finish Nailer, Straight, 16GA (PCC792LA)

PORTER-CABLE

Based on 344 reviews Check latest price

Product description

PORTER-CABLE PCC792LA 20V MAX Cordless Lithium 16GA Straight Finish Nailer Kit is driven by 100% battery power, which eliminates need for a compressor, hose or costly gas cartridges. The motor design provides consistent firing power into various materials (baseboard, crown moldings, cabinet assembly) and assorted climate conditions. This 16GA Straight Finish Nailer has a fastener length capacity of 1" to 2-1/2" and a magazine capacity of 100 nails. It also features multiple tool free settings that provide increased productivity and user safety and it has multi functional dual LED lights function for workspace illumination and error indication. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions. Backed by PORTER-CABLE'S 3-Year Limited Warranty. Kit includes: PCC792 Nailer, PCC680L Battery, PCC691L Charger.

  • 100% battery power: Eliminates need for a compressor, hose or costly gas cartridges
  • Multiple Tool Free Settings: provide increased productivity and user safety
  • Motor design: provides consistent firing power into various materials and climate conditions
  • Multiple tool free settings: Provides increased productivity and user safety
  • Fastener length capacity of 1" to 2-1/2" and a magazine capacity of 100 nails

User questions & answers

Question: where can you find extra batteries
Answer: The short answer is extra batteries should be available from the place you got the tool. The longer response would be Amazon or big retailers such as Lowes and Home Depot.
Question: I'm installing pine flooring (softer wood) will this tool get the job done
Answer: yes you can set the impact for thickness and hardness of wood
Question: Is it more powerful than the Arrow 200 Electric brad nailer? And does the battery charger have trickle charging
Answer: I have had 2 different electric nailers. Also have had and still use two 18 volt 18 gauge nailers. One is a combo brad/staple nailer. I must say this 16 gauge Porter-Cable is the most powerful nailer I own. It does have a trickle charge as well. This a GREAT nailer.
Question: Is there a roofing nail available with this gun
Answer: No, it uses 16 gauge brads only. You would need a specific roofing nail gun.

Paslode, Cordless XP Framing Nailer, 905600, Battery and Fuel Cell Powered, No Compressor Needed

Paslode

Based on 302 reviews Check latest price

Product description

The cordless XP framing nailer system is designed to deliver 15% more power to increase productivity. Less standing nails and better drive performance into harder woods means you can put your hammer away and let this cordless nailer do it all. Plus, the new Paslode framing fuel with all season formula lets you keep working in temperatures down to 14⁰F when compressor hoses are freezing. The lightweight Paslode cordless XP framing system offers the nailer, nails, and fuel so you enjoy the power to drive non-stop nailing all day, every day.

  • Increased Productivity - Drives nails flush in LVL and other hardwoods that remodelers encounter.
  • All Season Formula - Works in temperatures down to 14°F.
  • Lightweight - 7.2lbs. for better comfort and control while working overhead or in tight spaces.
  • Guaranteed Durability 50% Longer Run-time with 7V Li-ion Battery for up to 9,000 nails per charge.
  • Compact Design: Fits between 16" o.c. studs, joists and roof trusses.

User questions & answers

Question: Dumb question: is the charger included (no mention specifically of same
Answer: This framing nail does not work with plastic collated nails. This model requires clip head or offset round paper collated nails. If you need the one that uses round head plastic collated nails, you will need model NR1890DR or NR1890DRS.
Question: What gas cart is used
Answer: This tool is not made in the USA.
Question: is the nails for this gas nails the same as the air nailer? i will be using both together
Answer: First, a reminder that this version of the nailer is only made to shoot papertape nails, 30-34 degree. If the nails you have are trul plastic collated them they are 21 degree and will cause damage. After making sure you have put in the correct nails, there are two buttons right by the bottom of your hand when holding the tool. One is on/off, and the other changes from sequential mode to bump mode. Press and hold the on button till a green light comes on, then operate.
Question: What is the largest length nail that can be used with this gun? I'll be doing some floor plates in a remote location, so probably need at least
Answer: In most cases you shouldn't have any problems with this.

Metabo HPT Cordless Finish Nailer Kit, 18V - 3.0 Ah Lithium Ion Battery, Brushless Motor, 15 Gauge, Lifetime Tool Warranty (NT1865DMAS)

Metabo HPT

Based on 55 reviews Check latest price

Product description

The 15-Gauge Cordless Angled Finish Nailer NT1865DMAS allows the user to move easily around the jobsite without hoses or compressors!



Equipped with brushless motor technology and powered by a compact 3.0 Ah Lithium Ion battery, it is capable of driving up to 1,100 nails per charge.



It employs a unique air spring drive system (similar to Metabo HPT's pneumatic line) that uses compressed air to drive each nail resulting in zero ramp up time, increased shooting speed, recoil that feels like a pneumatic nailer, quicker response time between drives, and better flush driving -- even at an angle.



It also features a low battery indicator, selective actuation, tool-less jam release, tool-less depth of drive, variable position belt hook and LED light.



This 15-Gauge cordless angled finish nailer drives nails from 1-1/4" to 2-1/2" in length and can be used for a variety of applications including chair rail, install molding, cabinetry and other finish applications.

  • CORDLESS NAILER: 15 Gauge Cordless Nailer
  • INCLUDES: NT1865DMAS, Compact 3.0Ah Lithium Ion Battery, Charger, Contractor Bag, Safety Glasses
  • FASTENERS: 15 gauge angled finish nails from 1-1/4-in - 2-1/2-in
  • POWER: 1,100 Nails per charge using Metabo HPT's compact 3.0 Ah Li-ion battery
  • APPLICATIONS: Ideal for all construction framing applications but is particularly useful for punch-out work on a jobsite without the need for a tank or hose
  • DEPTH ADJUSTMENT: Get a professional finish with varying materials with the tool-less depth of drive adjustment
  • PNEUMATIC-LIKE FEEL: The unique air spring drive system delivers similar performance as a pneumatic nailer

User questions & answers

Question: why is the kit less expensive than the tool only? Is it tool in the kit the same as the standalone tool
Answer: Comes with the pole mount, the power supply for the light, the light itself and the quick start guide.
Question: Thanks, bu I realized the nails were different. I was wondering if there was something in the performance of the 16 gauge that made it more expensive
Answer: yes. .5m
Question: I need a push rod for an 18 volt finish nailer
Answer: The diameter of the pole itself at it's biggest point is roughly ~1 inch. In my personal home setup, I too use a threaded camera clamp to hold onto the pole under the light and it works well. Hope this helps! - CorsairLobo
Question: Why didn’t i get the rubber tip with mine? and i noticed someone else wrote a review about that. please send it to me. thanks
Answer: This is a key light, not a set, it'd come with 1.

Product features

Unique Air Spring Drive System

Uses compressed air to drive each nail resulting in zero ramp up time, increased shooting speed, recoil that feels like a pneumatic nailer, quicker response time between drives, better flush driving- even at an angle and easy maintenance due to fewer parts to manage

Quick Clear Nose

With tool-less jam release for easy maintenance and reduced downtime

Side-lock Switch

Is incorporated to prevent accidental firing

Selective Actuation Switch

Transitions between sequential mode and bump fire mode, when rapid nailing is preferred

PORTER-CABLE 20V MAX Cordless Brad Nailer Kit, 18GA (PCC790LA)

PORTER-CABLE

Based on 3 reviews Check latest price

Product description

The PORTER-CABLE PCC790LA 20V MAX Lithium 18GA Brad Nailer Kit is 100% battery powered which eliminates need for compressor, hose or costly gas cartridges. The special motor design provides consistent firing power into various materials and climate conditions. This nailer features multiple tool free settings to provide increased productivity and user safety. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions reducing user fatigue. It also offers multi functional dual LED lights to light up your workspace, and indicate errors. Fastener length capacity of 5/8" - 2", magazine capacity of 100, with sequential firing mode and trigger lock. Includes Battery, and Charger.

  • NO COMPRESSOR NEEDED: This cordless brad nailer is battery powered, eliminating the need for a compressor, hose, or expensive gas cartridges.
  • CONSISTENT DRIVING DEPTH: Our depth adjustment wheel allows you to properly countersink nails consistently. Nail Diameter: 18 gauge
  • INCREASED PRODUCTIVITY: A tool free release lever, jam release, and depth adjustment wheel make your life easier.
  • BETTER RUNTIME: Included 1.5 Ah 20Volt MAX Lithium ion battery lasts longer than NiCad, charger included. Integrated Belt Hook: Yes
  • 3 YEAR LIMITED WARRANTY: PORTER CABLE will repair, without charge, any defects due to faulty materials or workmanship for 3 years from the date of purchase.

User questions & answers

Question: Does this come with a charger
Answer: This one does come with a battery & charger, but they sell a model without a charger
Question: Would this tool work to repair my fence
Answer: Sure it can repair your fence and build you new fences too I use it every day for at least two hours . Great tool I have not use my compressor from I bought this tool. But do not use the nailer alone use screws too.
Question: Will it go through 1" oak trim
Answer: yes
Question: can i use multiple lengths of nails
Answer: 5/8 inch through 2 inch nails....awesome gun...i am so happy with it

CRAFTSMAN V20 Cordless Brad Nailer Kit, 18GA (CMCN618C1)

Craftsman

Based on 1 reviews Check latest price

Product description

This CRAFTSMAN V20 MAX 18GA cordless finish nailer's cordless design eliminates the need for compressors, hoses, or costly Gas cartridges. The motor delivers consistent power firing in various weather conditions and materials. The extensive runtime on a single battery and Fast shot speed allow for less downtime on the jobsite. The single tool-free depth setting makes adjusting your nail depth quick and simple, while the other tool-free settings make potential nail jams or stalls easy to fix. The cordless finish nailer is lightweight and well balanced, making this product very comfortable to use for prolonged time.

  • CRAFTSMAN V20 MAX cordless nailer drives adhesive collated 18 gauge finish nails
  • Fully cordless design eliminates the need for compressors, hoses or costly Gas cartridges
  • Provides consistent firing power in various climate conditions and materials
  • Tool-free depth settings for quick set up and consistent results
  • Tool free jam and stall settings for ease of use and improved efficiency
  • Lightweight with optimal center of gravity provide optimal balance and comfort in hand during use
  • Contoured overmolded handle for added comfort during use

User questions & answers

Question: Will DeWalt battery work
Answer: No, the CMCN618C1 should only be used with the CRAFTSMAN battery.
Question: Can this be used to attach wall panel to an old shipping pallet? I'm building a bar. Thanks
Answer: Absolutely yes! I use this one every single day for my projects, shiplap, pallets, plywood, crown molding, etc. just be sure to get the right nail size and go ahead!!
Question: Can this tool work with the Black and Decker 20 volt battery for the Matrix system
Answer: No. The batteries for DeWalt, Black & Decker, Porter Cable, and Craftsman do not cross brands and are not compatible.
Question: Does this unit come with a battery and charger
Answer: Yes, The CMCN618C1 comes with one battery and one charger.

18-Volt ONE+ AirStrike 18-Gauge Cordless Brad Nailer (Tool-Only)

Based on 447 reviews Check latest price

Product description

The Ryobi 18-volt one+ system presents the next generation in cordless convenience. This 18-gauge brad nailer features airstrike technology, which eliminates the need for noisy compressors, bulky hoses or expensive gas cartridges. This means faster setup and easier maneuvering on the job site. The Ryobi p320 airstrike brad nailer drives 18-gauge nails from 5/8 in. To 2 in. Length.

  • Drives up to 60 nails per minute
  • No compressors, hoses or pricey gas cartridges required
  • Cordless design offers both convenience and superior performance

User questions & answers

Question: What power does this brad nailer run on
Answer: Yes it works great. You just need to make sure that the nails are long enough for your project.
Question: can you used it for framing
Answer: It comes with a few. Maybe 50 to 100. It just depends on what Ryobi puts in the bag
Question: Can you adjust for the depth the nail goes into the wood
Answer: No they can't -- I just spoke to a Ryobi rep in Home Depot about it. On the other hand, the Lithium chargers can charge the old style orange alkalilne batteries
Question: Can you adjust for the depth the nail goes into the wood
Answer: I have used mine shooting both 1" & 2" nails and haven't experienced any problems. When you get to the end of a stick of nails, it will sometime jamb, but that's easily fixed by opening the nailer head and removing the jam. I am using the large lithium battery and it has much more driving force which may eliminate the firing pin from sticking. If I didn't know it was a refurb, I would think it was new. There wasn't any marks on it, and I love it. Try using the larger battery....it may solve your problem.

Freeman PE4118GF Cordless 20V 4-in-1 18 Gauge Engineered Hardwood Flooring Nailer & Stapler with Lithium-Ion Batteries, Case, & Fasteners

Based on 11 reviews Check latest price

Product description

The Freeman PE4118GF cordless 20 Volt 4-in-1 18-gauge 2" Flooring nailer and stapler with Lithium-Ion batteries, case, and fasteners is the ultimate choice for installing flooring as well as tackling finish work around the house and job site. Use the 45 degree angle nose attachment to install Engineered Hardwood , Tongue and Groove flooring and , or remove it for applications such as Moulding and trim, insulation, plastic sheeting, cabinetry, paneling, and hobbies and crafts. This tremendously versatile electric tool is compatible with 18 gauge brad nails from 3/4" To 2", and 18 gauge 1/4" Narrow crown staples from 3/4" To 1-5/8". A select fire switch on the side panel toggles between sequential single firing for precision or contact bump firing for speed. The cordless design delivers high power technology and fast firing speeds, and eliminates the need to be tethered to a loud and heavy air compressor. The battery is capable of 400 shots per charge and 30 fasteners per minute, and can be fully charged in 45 minutes or less. A Reload indicator lets you see when fasteners are running low, and the 2-in-1 bottom-loading magazine makes reloading Quick and easy. The depth of the nails and staples can be adjusted by simply turning a wheel above the drive blade. An ergonomic handle helps reduce fatigue and increase control. The no mar tip protects your work surface, ensuring professional results for DIYers as well as construction contractors. Two built-in side lights help you work in dimly lit areas, while red and Green LED lights on the side of the tool indicate when the battery is low, The tool is jammed, fasteners are low, or the tool is overheating. upgraded features of this innovative cordless flooring nail gun and stapler Combo include the Freeman F20 Platform (20 volts instead of 18), battery level indicator lights on the lithium-ion batteries, a 4 amp rapid charger up from 1. 7 amps, and a re-engineered nose design for less jamming. this kit comes with everything you need to get started, including the cordless electric nailer and stapler, 45 degree angle flooring attachment, two 20V Lithium-Ion batteries, a rapid charger, 500 brad nails, 500 staples, adjustment tools, and a hard-sided blow molded case. The cordless 20 Volt 4-in-1 18-gauge 2" Flooring nailer and stapler with Lithium-Ion batteries, case, and fasteners comes at a fraction of the cost of four separate tools, will significantly increase your productivity, and is covered by Freeman 1 year professional tool .

  • Perfect for tongue and groove flooring Installation, decorative trim, moulding, cabinetry, paneling, upholstery, insulation, plastic sheeting, window casing, furniture trim, Picture frame Assembly, and hobbies and crafts
  • Compatible with 18 gauge Brad nails from 3/4" To 2", and 18 gauge 1/4" Narrow Crown staples from 3/4" To 1-5/8"
  • High power technology provides fast firing speeds up to 30 nails/ staples per minute
  • Select Fire switch for fast and easy switching between bump and single firing mode
  • Two high capacity 20V 2. 0Ah lithium-ion batteries produce enhanced battery life
  • Quick charger fully charges batteries in under 45 minutes for less downtime
  • Easy access nose for clearing jams in the event of a jammed fastener

Metabo HPT Cordless Brad Nailer Kit | Unique Air Spring Drive System | 18V Brushless Motor | 18 Gauge | 5/8" to 2" Brad Nails | Compact 3.0 Ah Lithium Ion Battery | Lifetime Tool Warranty (NT1850DES)

Metabo HPT

Based on 85 reviews Check latest price

Product description

The 18-Gauge Cordless Brad Nailer NT1850DES allows the user to move easily around the jobsite without hoses or compressors!



Equipped with brushless motor technology and powered by a compact 3.0Ah Lithium Ion battery, it is capable of driving up to 1,650 nails per charge. It employs a unique air spring drive system (similar to Metabo HPT Pneumatic line) that uses compressed air to drive each nail resulting in zero ramp up time, increased shooting speed, recoil that feels like a pneumatic nailer, quicker response time between drives, better flush driving-even at an angle, and easy maintenance.



The cordless finish nailer also features a low battery indicator, selective actuation, tool-less jam release, tool-less depth of drive, variable position belt hook and LED light.



This 18-gauge cordless nailer drives nails from 5/8" to 2" In length and can be used for a variety of applications including molding installation, cabinet and picture frame assembly, wainscoting, chair rail, window and door casing and decorative trim.

  • CORDLESS FREEDOM: Pneumatic power with 18 volt cordless freedom
  • PNEUMATIC-LIKE FEEL: The unique air spring drive system delivers similar performance as a pneumatic nailer
  • FASTENERS: 18-Gauge nails from 5/8-in to 2-in in length
  • APPLICATIONS: Ideal for molding installation, cabinet and picture frame assembly, wainscoting, chair rail, window and door casing and decorative trim
  • POWER: Capable of driving up to 1,650 nails per charge using Metabo HPT's new compact 3.0 Ah Li-ion battery
  • BRUSHLESS MOTOR TECHNOLOGY: Longer run time per charge, less maintenance and increased durability
  • DEPTH ADJUSTMENT: Tool-less depth of drive adjustment for flush drives into various materials

User questions & answers

Question: How much does the nail gun weigh
Answer: No, just plug in.
Question: What is the weight with battery attached
Answer: 110V.
Question: Will this gun drive a 2 1/8" nail
Answer: No. It is a cooling fan only.
Question: Is this tool made in China
Answer: Amazon, as the seller, should be able to answer this question.

Product features

Unique Air Spring Drive System

Uses compressed air to drive each nail resulting in zero ramp-up time, increased driving speed, and recoil that feels like a pneumatic nailer

Selective Actuation Switch

Transitions between sequential mode and bump fire mode, when rapid nailing is preferred

Tool-less Depth of Drive Adjustment

For flush drives into various materials

Compact 3.0Ah Lithium Ion Battery

Is 3/4" shorter and .6 lbs lighter than a conventional 3.0Ah battery for complete portability

Latest Reviews

View all