13 best small wood lathes

• 【1/2 HORSE POWER MOTOR】- 1/2 Horse Power motor, Voltage: 120V. The powerful  motor starts softly offering motor's maximize safety and low noise.
• 【4 GRADE SPEEDS】- The adjustable belts can be adjust with ease and accuracy within 3400 RPM, 1100, 1600, 2300, 3400prm available.
• 【LARGE WORK CAPACITY】- 40" (1000mm) distance between centers, Cutting Diameter 14" (350mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.
• 【SOLID STEEL CONSTRUCTION】- Solid steel constructed wood lathes for durability and strength, providing increased stability and smooth operation, reducing vibration.
• 【FREE WRENCHES & CHISELS】- 3 wrenches are for easy using and maintainance. 3 chisels for free also, 1 x Skew Chisel, 1 x Shear Scraper and 1 x Spindle Gouge.

User questions & answers

Question:	Can you do aluminum
Answer:	It was not be cost effective because you would need too many attachments. You’d have to modify the tool rest. It would turn it but you couldn’t hold the tool to turn it without modifications. There are lathes out there built for using with aluminum. Hope this helps
Question:	Will the wen la4444 4-inch 4 jaw self centering chuck set with -inch x 8 tpithread fit this lathe
Answer:	https://www.amazon.com/gp/product/B000KI8CBQ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 This is what you need
Question:	does this brand and model come in 220 volt
Answer:	Only 110 volts
Question:	What are the minimum and maximum clamping measurements
Answer:	0 to 40 inches

Product features

Powerful Motor

1/2 Horse Power motor, Voltage: 110V, starts softly to offer motor's maximize safety and low noise design.

Variable Speed

Optimally designed speed ranges of 1100-3400 RPM variable speed.

Large Work Capacity

40" (1000mm) distance between centers, swing over bed 14" (350mm). High concentricity.

Accurate & Stable

Steel constructed mini lathes is of increased stability and smooth operation.

7W LED Work Light

3 wrenches are for easy using and maintainance. 3 chisels for easy carving work.

Wide Application

Wood turning lathe, an ideal tool for various operations such as cutting, sanding, knurling, drilling, or deformation.

14 in. x 40 in. Wood Turning Lathe & Variable Speed 3400RPM

Our 14 in. x 40 in. Variable Speed Wood Turning Lathe features variable speed 1100-3400 RPM, a 1/2hp motor. Soft startups ensure safety to both workpieces and the motor. Precise design is perfect for high speed sanding and polishing of finished work.

Product description

JET JWL-1221VS 12"x21" Variable-Speed Wood Lathe (719200)

• VERSATILITY: 24 integrated indexing positions.
• CONVENIENCE: Easy-to-reach controls and DRO.
• OPTIMAL SPEED: Choose from 60 to 3,600 RPM.
• INNOVATION: Ratchet-style belt tension system (patent pending).
• ON-BOARD STORAGE: Two handy tool caddies.

User questions & answers

Question:	Will 1221 tail stock accept #2 Morse taper drill chuck
Answer:	Yes! Just be sure that the tail stock hole and morse taper are clean, otherwise the #2 morse taper can be difficult to remove...
Question:	has this lathe have a indexing head
Answer:	William, yes this lathe has an indexing head. I have not yet used the feature but it is done with a spring loaded pin which you lock into anyone of 24 positions. The spring loaded pin in screwed in once the pin is set to hold it in place.Rich F
Question:	Is this Ron Swanson approved
Answer:	Yes, Ron personally blesses each unit as it’s loaded onto a truck.
Question:	Do you need to move a belt to change speeds? Or is there a dial or switch
Answer:	This lathe has a variable speed controller, so the speeds may be changed using the simple rotating knob. To provide speed ranges to suit any situation, especially for the more experienced turner, there is a three step pulley. This arrangement allows the variable speed controller to adjust speeds from 60 to 900 rpm on the low step of the pulley, 110 -1800 rpm on the 2nd step (medium), and a high speed range of 220 -3600 rpm on the the 3rd step. The belt need only be changed if you want to move to a different range of speeds. This is a very simple process.

Product features

JET 12'' X 21'' Variable Speed Wood Lathe - JWL-1221VS

The JET 1221VS lathe is different from anything we’ve made before. In truth, it’s different from anything that anybody has ever made before. The design is better. The features are better. The entire turning experience is better. And it all focuses on one concept … Control.

Product description

Features

- High-precision, stability, low noise.

- Designed for the home DIY enthusiasts, small and portable, strong power.

- Large torque ball bearing motor.

- Suitable for all small square or cylindrical timbers such as Pterocarpus santalinus, dalbergia odorifera, Thuja sutchuenensis, etc.

Specifications

Power:200W

Maximum processing length:140mm

Maximum processing width:50mm

Material: aluminum alloy

Maximum processing thickness 50 mm

Product size:310*60*65mm

Work way:manual

Voltage:DC12-24V

Adapter:

Input:110V-24V AC~50/60Hz 1.3A Max

Output:12/15/16/18/19V 4.5A Max 20/24V 5A Max

Adapter size:113*53*35mm

Package Included:

1x adapter

1x machine

1x 50mm Diamond Cutting Blade

1x 50mm HSS Cutting Piece

1x polishing wheel

5x sandpaper

1x caliper

1x grinding rod

3x drill

1x cable

6x carving blade

1x diamond blade connecting joint

1x high speed steel blade connecting joint

1x drill chuck wrench

1x Allen wrench

1x beads fixed needle 1.5/2.0/ 2.5MM

1x thread fixed needle

• Specially designed for the home DIY enthusiasts and hobbies,small and portable size with strong power.
• Super large torque ball bearing motor, maximum rotating speed up to 8000RPM providing ultra strong cutting power with low noise, you can use it at home.
• Transparent organic dustproof glass cover with super convective cooling hole, the welding line is covered with a full heat shrinkable tube.
• With 7 levels of power adapter enable you to adjust the rotating speed easily to meet different cutting speed.
• High quality aluminum alloy base and pure steel structure drill chuck.

User questions & answers

Question:	Can this be used in making wood turned pens
Answer:	It comes with the pieces to be able to perform all the functions that it displays, yes, however the size is on such a small scale that you are putting way more effort into trying to use this than you are getting out of it. This wasn't good for anything that I purchased it for, and isn't adaptable to larger scale pieces. Doesn't have a lot of power at all to perform any of the 'tasks' it boasts to accommodate.
Question:	can the chuck take 1/4 inch metal rod
Answer:	Don't buy from this company. The lathe they sent was very poorly made and we had an awful time returning it. Amazon had to get involved.
Question:	Is the chuck removable and if so, what is the diameter of the drive shaft
Answer:	It came with 1 tool
Question:	How is this machine cnc? is there a data port or card slot
Answer:	No, it doesn't. Actually I returned it unopened after buying it for this very reason. They were very understanding and refunded the full amount. As the description says it works well with "Plastic and Wood" but not metal.

Product description

Ideal chisel kit for turning pens pepper mills spindles bowls and lots more woodturning projects of all sizes Each chisel measures 16-1/4" in length with a 6-1/4" M2 High Speed Steel blade and a 10" hardwood turned handles Set includes chisels 3/16" Parting Tool 5/8" Spear Scraper 1" Skew Chisel 5/8" Skew Chisel 5/8" Round Nose Scraper 1/2" Bowl Gouge 3/4" Spindle Gouge 7/8" Roughing Gouge Includes wooden case for storage and carrying Great for woodworkers woodturners and penturners of all skill levels

From the Manufacturer

We have assembled this 8-piece set to satisfy the majority of your turning needs. It is suitable for turners of all skill levels. It is the ideal kit for turning small pens, spindles, bowls and larger projects. The M2 High Speed Steel 5-1/4-Inch blades outlast high carbon steel 6-to-1 and will give you years of use. The set includes 8 essential chisels: 3/16-Inch Parting Tool, 5/8-Inch Spear Scraper, 1-Inch Skew Chisel, 5/8-Inch Skew Chisel, 5/8-Inch Round nose scraper, 1/2-Inch Bowl Gouge, 3/4-Inch Spindle Gouge, 7/8-Inch Roughing Gouge. It also comes with beautifully turned 10-3/4-Inch hardwood handles in an attractive wood display box

• Ideal chisel kit for turning pens pepper mills spindles bowls and lots more woodturning projects of all sizes
• Each chisel measures 16-1/4" in length with a 6-1/4" M2 High Speed Steel blade and a 10" hardwood turned handles
• Set includes chisels 3/16" Parting Tool 5/8" Spear Scraper 1" Skew Chisel 5/8" Skew Chisel 5/8" Round Nose Scraper 1/2" Bowl Gouge 3/4" Spindle Gouge 7/8" Roughing Gouge
• Includes wooden case for storage and carrying
• Great for woodworkers woodturners and penturners of all skill levels

User questions & answers

Question:	Do i need to have a high speed bench grinder or slow speed
Answer:	Slower is better than higher. Try not to use a wheel that is lower than 80 grit. 100 seems best. If you go up to high, you end up heating the tool too much.
Question:	are these benjamins best
Answer:	Yes, these are the Benjamins Best tools. I'm enjoying them very much.
Question:	What type of grinding wheel should I use to sharpen these chisels, being made with M2 High Speed Steel
Answer:	For scrapers and gouges, I use a belt sander. For skews and bedans I use a wet stone grinder. I use a polishing wheel with emery compound to hone all my blades between sharpenings.
Question:	Are these "Benjamins Best" (as recommended by Wood Magazine)? Description doesn't say
Answer:	My set has "Benjamins Best" stamped right on the handles.

Product features

HSS Wood Lathe Chisel Set

We've assembled this 8 piece set to satisfy the majority of your turning needs suitable for turners of all skill levels. An ideal kit for turning pens or much larger projects on lathes of any size. The set includes 8 essential chisels with beautifully turned hardwood handles packaged in a practical and attractive wood display box.

Product description

1/3 Horsepower bench top lathe with variable speed motor

• Motor: 1/3 HP, 2 Amp, 110V, Single-phase, 60 Hz
• 12-inch distance between centers
• 8-inch swing over bed
• Cast iron construction and infinitely variable speed control
• Includes two tool rests

User questions & answers

Question:	I have a chuck that is 1"-8tpi female thread (nova 48111), it doesn't fit on this lathe. what adapter should i buy
Answer:	Buy a 3/4" 16 TPI to 1" 8 TPI adapter. If you further questions go to http://www.woodturningz.com/downloads/w1704_ds.pdf for the specs on this machine.
Question:	is there an adapter for the face plate for mounting live center chucks? I bought one but won't line up with holes
Answer:	I'm not sure if they make the adapter to mount on the face plat. I have a 2" diameter three jaw,self centering scroll type chuck that i bought from Amazon that ihave used that works great,but i think that the holes in the face plate is for mounting a backing block to the piece of wood stock to turn a bowl. It says in the manual that you glue the block to the wood your turning and use the holes to screw the block on to face plate. Hope this helped.
Question:	What size wood stock can it hold? How about something like 12'' long by 8" wide piece of wood
Answer:	The length it will hold will be dependant upon what chucks you have in the head and tail stock. The bulkier the chucks, the shorter the length it will handle. I'd say it will hold 12" lengths unless your chucks are sizable. I wouldn't try more than 4" width stock unless it was short. Although the lathe may hold the stock, it would be too much for the motor. The intended purpose of this lathe is to make small things like ink pens, Christmas ornaments, small toys like tops or yo-yo's and tool handles etc. If you want to mount 12" X 8" stock you should be looking at full sized lathes.
Question:	is there anyway to secure to a bench
Answer:	Yes. It has has three holes in the base that you can bolt it down with. I bolted mine down on a metal stand. It holds it down real solid. Mine is the Shop Fox W1704 also. It is well built. I really like mine. Hope this helps!

Product features

Shop Fox W1704 Benchtop Wood Lathe

Tackle pen turning or other small cutting or shaping projects using the Shop Fox W1704 bench-top lathe from Woodstock International. Made of cast iron, and designed to fit neatly on a workbench, this lathe features a 1/3-horsepower, variable-speed motor and delivers spindle speeds between 700 and 3,200 revolutions per minute (RPM). It also features a safety paddle switch, an MT No. 1 spur center, an MT No. 1 live center, 4-1/4-inch and 7-inch tool rests, a 5-3/4-inch faceplate, and a 3/4-by-16-inch TPI RH spindle.

Includes Two Tool Rests

The W1704 includes both a 4-1/2 and 7-inch tool rest for various turning applications and with a 13-inch distance between centers and an 8-inch swing over the bed this lathe is ideal for a variety of turning projects.

Variable Speed

The infinitely variable speed from 700-3200 RPM comes in handy when turning hard or soft species of wood.

5-3/4-inch Faceplate Included

This benchtop lathe includes a 5-3/4-inch faceplate which threads onto the headstock spindle for non-spindle turning (usually used for making bowls or other items that cannot be supported from the tailstock).

Product description

Parameter:

Material: aluminum alloy and Acrylic

Power: 100W

Voltage: 24V DC

Speed: 4000-8000 r / min, 7 grade speed

Size: 310* 60 * 70mm

Maximum turning diameter: 70mm.

Maximum clamping length: 180mm.

Chuck clamping range: 0.6-6mm.

Power Adapter：

Input: AC110V- 240V~50/60Hz 1.5A max

Output:12/15/16/18/19V 4.5A max; 20/24V 4A max

Wire length:1.1m+1.1m

Features:

High-precision, stability, low noise;

Designed for the home DIY enthusiasts, small and portable, strong power;

Transparent plexiglass shield, super convection cooling holes;

Large torque ball bearing motor.

Precautions:

1.If the user does not have lathe base experience, when used, should follow: low speed, slowly, cautiously and other security operations.

2.Drill chuck axis, the axis of the wood, the tailstock center axis of the drill should be in a straight line, or need to adjust the nut.

3.If not a cylinder, the speed should be reduced.

4.Tailstock bearing without lock tight.

5. When using a knife, locking the bottom of screw, location should be away from timber 1-1.5cm.

Package include:

1x Buddha Beads Lathe

1x Power Adapter

6x Wood carving set

3x Hex shanks(1.5mm,2mm,2.5mm)

Warm Notice: dear customers, your satisfaction is our top pursuit, if you receive any defective items, please never hesitate to contact us, we offer 30days return policy. thank you!

• Designed for the home DIY enthusiasts, small and portable, strong power, not suitable for mass production or commercial use.
• Power: 100W Voltage: 24V DC Material: aluminum alloy and Acrylic Speed: 5000-8000 r / min, 7 grade speed Size: 310* 60 * 70mm 3x Hex shanks(0.059inch,0.079inch,0.098inch)
• Maximum turning diameter: 70mm. Maximum clamping length: 180mm. Chuck clamping range: 0.6-6mm
• High-precision, stability, low noise, aluminum alloy materials, CNC machining.
• Thick aluminum base, acrylic dust cover motor. Transparent plexiglass shield, super convection cooling holes.

User questions & answers

Question:	I need a new tailstock center for my lathe like this. where can I get one please
Answer:	if you need a new tailstock center ! Please contact us at [email protected] ! We guarranty a satisfied solution to you.
Question:	Can this be used to turn hardwood
Answer:	so donot worry ! The mini lathe can turn hardwood !
Question:	Is there a longer bed available
Answer:	Yes you can buy this on amazon to the length you want. extruded aluminum t slot 1x2 then mount the motor and the end holder on to the new bed and ypur good. But at some point the motor will not be able to handle it so motor upgrade may be needed.
Question:	Can this be use for wood ring making
Answer:	I have used this for making wood rings, but primarily the sanding and polishing of bentwood rings made from painstakingly rolled wood veneer. Would not recommend for any kind of cutting, as it doesn't have the power.

Product description

If pen turning is your passion, then you'll appreciate the incredible utility you'll get from the PENPAL Pen Making Lathe. At only 15lbs, this fully featured pen turning workhorse easily travels outside the home or conveniently goes or stores pretty much anywhere in your house or outside. Use as a 2nd lathe always ready for sanding, finishing or making extra pens. Precision engineered and easy to set up and use. Equipped with a 2" Dust Collection Hood for cleaner air and less dust. Fitted with a heavy duty tool rest pre-set to minimize adjustment. Contains mounting holes and flange to securely mount or clamps your lathe to almost any surface. Made of extruded anodized aluminum. Variable speed from 0 - 4300 RPM. Number 1 Morse taper in tailstock. Headstock contains a collet type mandrel.

• 1/5hp 110V variable speed motor (0-4300 rpm); Lightweigh (15 lbs); Portable; Small footprint (20x6x6 inches)
• Headstock threaded to 3/4" x 16tpi; Tailstock uses #1 Morse Taper mount (1MT)
• Anodized aluminum base with mounting holes and flange to mount lathe on most surfaces; Swing over bed 5-1/2"
• Includes: pen mandrel shaft with collet closer nut for mounting, mandrel saver, 7mm bushings, 7mm drill bit, collet wrenches
• Also includes: mini dust collection hood with 2" port, 2" hose clamp, and hood mounting bracket

User questions & answers

Question:	Does the tailstock have a MT#1 or #2 that can accept a drill chuck for blank drilling on the lathe
Answer:	mt#1
Question:	what is the largest blank that can fit into the lathe
Answer:	This is a pen lathe and not useful as any thing else unless turning doll furniture. A 6 to 7 inch blank is about max
Question:	Does this lathe have forward and reverse controls
Answer:	No, it only spins in one direction. It only has an on/off switch and a variable speed control knob.
Question:	Is a pen mandrel included with lathe purchase
Answer:	It comes with a collet type mandrel. This is a very lightweight lathe with lots of speed, but not much torque. I found it a bit under powered. Suitable for most woods, but not for acrylics. This is not my primary lathe, but one that I can easily take when we are traveling in our motor home.

Product description

One of the easiest to use, best value chucks on the market. The Barracuda2 is an easy to use, high-performance, full accessorized key operated self centering four-jaw lathe chuck system. You only need one hand to use this lathe chuck as the "T" handle jaw tightening key enables you to to tighten the jaws with only one hand while your other hand is free to support your work.Comes with a wide variety of accessories (including 4 sets of jaws), and will mount any project onto your lathe. Ideal for bowls, spindles, small projects and much more. Fits all "C" series accessories, a 3.5" diameter, 1" x 8tpi, weight is just 4.0 lbs., and comes with its own case. Includes; #1 jaws, #2 jaws, #3 jaws, 1" pin jaws, a Screw Chuck Adapter, 3/4" x 16tpi spindle adapter, "T" handled Jaw tightening key, "T" handled Allen wrench, and a carrying case.

• Includes: Barracuda2 chuck body, self-centering jaw sets, woodworm screw chuck, spindle adapter, gear key, Allen wrench, screws, storage case
• Barracuda2 chuck body is 3. 5" Diameter and weighs 4 lbs. ; pre-threaded to 1" X 8TPI and includes 3/4" X 16TPI spindle adapter
• #1 step jaws: 3/32" To 1-3/8" & 11/16" To 2-3/8"; #2 round jaws: 7/8" To 1-1/2" &1-1/4" To 2"; #3 wide bowl jaws: 3-1/16" To 4-3/8"; pin jaws: 1" To 2-1/4"
• With the variety of included jaws, The CSC3000C will mount most turning projects onto your Lathe; including bowls, spindles, pens, other small turning projects, and much more
• This is a C-Series Chuck; Compatible with all additional C-Series Jaws and accessories: 7-3/4" Jumbo Flat Jaws (CJAWFJ2), 5" Small Flat Jaws (CJAWFJ1), Set of 2 Alligator Jaws (LCALJAWS), Pen Blank Drilling Jaws (CJAWPEN), 8-1/4" Super Finishing Jaws (CJAWXL), and more!

User questions & answers

Question:	Can i get this in 1 1/4" - 8 tpi
Answer:	Check out item LA11418. This adaptor may work for you.
Question:	Will a nova adapter work with this chuck? I have an old Rockwell 46010 I want to add this too. The only adapter I see for 7/8-14 is for Nova Chuck
Answer:	Hello,No, the Nova adapter will not work with this.Thanks
Question:	I need an adapter to fit 7/8 x 16tpi left hand
Answer:	No lathe has a left-hand-threaded spindle. If one did, the work would spin off the lathe every time you hit the 'on' button.
Question:	Is psi csc 3000c barracuda reversible
Answer:	There is no set-screw of any kind to maintain a safe secure hold of the chuck to the lathe while running in reverse. I do not on mine and would not without something like that available.

Product features

Maximize the Ability of Your Existing Wood Lathe

You will now easily be able to fitwork pieces with the PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System. Giving you high-performance, this Barracuda Lathe Key Chuck Systems completely accessorized and equipped to give the best results.

Sturdy and Easy to Operate

With a stunning build quality, the PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System includes a T handle jaw tightening key that enables you to tighten the jaws with only one hand while your other hand is free to support your work. This power tool also comes with a wide variety of accessories - including 4 sets of jaws, and will mount any project onto the lathe.

Product description

         Basic Data:

Brand: Dirtech

Material：Stainless Steel，Tungsten Carbide，Aluminum Alloy

Length of Tool Bar：10 Inches

Length of Handle：14 Inches

Total Length：22 Inches

Tang of Tool Bar：11.9mm

Aperture of handle: 12.1mm

         This set contains:

H12：Hollower with 12mm Round Carbide Insert

DT: Detailer with 2pcs Diamond Carbide Inserts

S14：Rougher with 14mm Square Carbide Insert

R12：Finisher with 12mm Round Carbide Insert

Parting Tool

Sanding Tool：with Sandpaper

Aluminum alloy handle: cyan and blue and red

T15 & T20 Torx star tip wrenches

         Other tool set：

DW-3:mini finisher Rougher Detailer with Woodhandle and all Carbide Tipped Inserts

DW-5:mid Size Rougher Detailer Finisher with 2pcs aluminum alloy handle and all Carbide Inserts

DW-6:mid Size Hollower Rougher Detailer Finisher with 2pcs aluminum alloy handle and all Carbide Inserts

DW-9:mid Size Hollower Rougher Detailer Finisher Parting Sanding with 3pcs aluminum alloy handle and all Carbide Inserts

         Other single tool：

R12：Finisher with 12mm Round Carbide Insert and Copper Hoop and T15 Wrench

R16：Finisher with 16mm Round Carbide Insert and Copper Hoop and T15 Wrench

S14：Rougher with 14mm Square Carbide Insert and Copper Hoop and T20 Wrench

Aluminum alloy handle: blue, cyan, red, gold（They can match the above tools）

• CNC machined 12mm solid stainless steel，Not easy to rust
• Indexable Replacement carbide insert design，Indexable give you fresh edge for maximum cutter life, And You can find matching carbide tipped insert(DW-9) in my Amazon store
• Replaceable Handle：Match 3pcs aluminum alloy handle
• Tool is designed with a square shaft making it easy to keep tools flat on the tool rest
• Total Length：22 Inches，Tool Length：10 Inches，Handle Length：14 Inches

Product description

Remember when you could turn bowls, cups, chess pieces, table legs and more? It’s time to turn some heads with the WEN 12-Inch by 18-Inch Variable Speed Wood Lathe. Boasting a 4.5A motor, this beast handles wood up to 18 inches long and 12 inches in diameter. If you need to take on anything larger, the WEN 3424EX Bed Extension can be purchased separately to increase the maximum capacity from 18 inches all the way up to 41 inches. Adjust the variable speed anywhere from 450 to 3500 rotations per minute with the onboard digital speed display illuminating the current RPM. The WEN Variable Speed Wood Lathe also features an MT2 spindle and tailstock taper for compatibility with all your favorite chucks and centers, along with a spacious 8-inch tool rest to provide support for your chisels and tools. The easy-to-use lever clamping system makes adjustments to both the tool rest and the tailstock simple and precise. Soft startups prevent damage to both your workpiece and your motor. And, because its a WEN product, your lathe comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you could turn heads with your woodturning? Remember WEN.

• Adjust the variable speed anywhere from 450 to 3500 rotations per minute
• Attack workpieces up to 12 inches wide and 18 inches long
• Soft startups prevent damage to both your workpiece and the 4.5-amp motor
• Includes a digital speed display, an 8-inch tool rest, a face plate, a live center, a spur center, and a two-year warranty
• Increase the capacity to 12 x 41 inches with the WEN 3424EX Table Extension (sold separately)

User questions & answers

Question:	Why is there a forward and reverse button on it
Answer:	There is a forward and reverse button on the model 34034..
Question:	Is it reversible
Answer:	No. Just variable speed.
Question:	multi directional
Answer:	No this is not multi directional
Question:	Does this tilt so you can make bigger projects than a 14in
Answer:	I have no clue what you mean by does it tilt. Probably Bc I'm not a woodworker, but I do know the end peice comes off and u could potentially make something bigger but you would need to find a way to stabilize the other end. Also, I'm turning plaster and once I go longer than 9in the machine will shutter. Hope this helped.

• 【1/3 HORSE POWER MOTOR】- 1/3 Horse Power motor, turning speed 4500RPM, Voltage: 110V. The powerful  motor starts softly offering motor's maximize safety and low noise.
• 【UNRIVALED SPEED CONTROL】- Turning speed control knob clockwise or counterclockwise to adjust speed freely within 500-3200 RPM. MT1 Spindle.
• 【LARGE WORK CAPACITY】- 12" (305mm) distance between centers, swing over bed 8" (203mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.
• 【CAST IRON CONSTRUCTION】- Cast iron constructed wood lathes for durability and strength, providing increased stability and smooth operation. Extremely sturdy cast iron construction to reduce vibration.
• 【PROFESSIONAL TOOL RESTS】- Moving the lock lever to adjust or replace the tool rest. 150mm & 300mm tool rests for easy replacement, ideal for a variety of turning projects in labs, workshops, engineering education, etc.

User questions & answers

Question:	What 3 or 4 jaw chuck will fit a mophorn 8 ×12 lathe
Answer:	Any chuck that fits on a 1" 8 TPI spindle and has an external diameter of 5" or less will work fine.
Question:	hi can i work 220v? i need 220v
Answer:	This model, sold in the the US version of Amazon is 120V only.
Question:	What size chuck do i need to get im looking for a 4 inch but i dont know which will fit this
Answer:	The lathe spindle is 1" 8 TPI. Any 4" chuck that matches that spindle size should work fine.
Question:	Can this unit be extended
Answer:	No. There are no attachment mechanisms to extend the bed, and there are no bed extensions available that match it.

Product features

Powerful Motor

1/3 Horse Power motor, turning speed 4500RPM, Voltage: 110V. Our powerful 1A motor starts softly to offer motor's maximize safety and low noise design.

Variable Speed

Optimally designed speed ranges of 500-3200 RPM variable speed. MT1 Spindle.

Large Work Capacity

12" (305mm) distance between centers, swing over bed 10" 8" (203mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.

Stable Operation

Cast iron constructed mini lathes is of increased stability and smooth operation.

Interchangeable Tool Rests

Two different-sized tool rests with 150mm & 300mm for various needs in turning applications.

Wide Application

Bench top wood lathe, an ideal tool for use in labs, workshops, engineering and education.

8 x 12 inch Variable Speed Benchtop Mini Wood Lathe & Variable Speed 500-3200RPM

Our 8 in. x 12 in. Variable Speed Benchtop Mini Wood Lathe features variable speed 500-3200 RPM, a 1/3hp motor and an MT1 spindle. Soft startups ensure safety to both workpieces and the motor. Precise design is perfect for various uses in labs, workshops, engineering and education.

• 【550W POWERFUL MOTOR】- The powerful motor starts softly ensuring motor's maximize safety and low noise. 370W provide great power for the lathe operation.
• 【UNRIVALED SPEED CONTROL】- Turning speed control knob clockwise or counterclockwise to adjust the speed freely within 760-3200 RPM. MT2 Spindle.
• 【LARGE WORK CAPACITY】- 18" (460mm) distance between centers, swing over bed 10" (254mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.
• 【CAST IRON CONSTRUCTION】- Cast iron constructed wood lathes for durability and strength, providing increased stability and smooth operation. Extremely sturdy cast iron construction to reduce vibration.
• 【PROFESSIONAL TOOL RESTS】- Moving the lock lever to adjust or replace the tool rest. 6" (150 mm) tool rests for easy replacement, ideal for a variety of turning projects in labs, workshops, engineering education, etc.

User questions & answers

Question:	Where is it made
Answer:	It is made in China and they don’t have an office or phone number in the US. That being said, it is a very nice little lathe.
Question:	What is yhe size of the spindle screw? not the bore but the threads. 1' 8tpi, 1.25 8tpi (threads per inch
Answer:	The spindle thread is metric, 33x3.5,
Question:	this unit comes with no instructions? there is a parts bag with no explanation on any of it or what its ? there website does not have any info at all
Answer:	Mine did come with a really crappy manual that is very little help. But it does have a parts list. I have a good amount of lathe experience so I knew what everything was and were the parts belong. You could look up other lathes if the same size and get a good idea of how everything works. Good
Question:	What is the thread count
Answer:	what thread count?

Product features

Powerful Motor

The motor provides great power for the lathe. Our powerful motor starts softly to ensure motor's maximize safety and low noise design.

Variable Speed

Optimally designed speed ranges of 760-3200 RPM variable speed. With 5 operating speeds, you’ll be able to turn workpieces at 760, 1100,1600, 2200, or 3200 rotations per minute. Built-in belt to adjust high, medium and low speed.

Large Work Capacity

Distance between centers: 18" (460mm). Swing over bed: 10" (254mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.

Stable Operation

Mini lathes constructed by cast iron are of increased stability and smooth operation.

Interchangeable Tool Rests

6" (150 mm) tool rest can be adjusted to any position and direction for various needs in turning applications.

Wide Application

Benchtop wood lathe, an ideal tool for use in labs, workshops, engineering, and education.

10'' x18'' Benchtop Wood Lathe

The premier quality wood lathe features with a powerful motor with electronic variable-speed spindle control and a digital RPM readout for precise speed adjustments, make this lathe a top choice. Heavy-duty cast iron construction and rubber feet provide increased stability and smooth turning operation.

Product description

The SHOP FOX W1836 Wood Lathe is packed with features that wood turners love. A powerful 3/4 HP motor with electronic variable-speed spindle control and a digital RPM readout for precise speed adjustments make this lathe a top choice. 24 indexes in increments of 15 allow evenly spaced cuts while the headstock stays in a locked position which opens new possibilities not available on most bench top lathes. Heavy-duty cast iron construction and rubber feet for increased stability and smooth turning operations.

• 3/4 HP, 110V, single-phase, universal motor
• Electronic variable-speed spindle control with digital RPM readout
• 12" swing over bed
• Two spindle speed ranges: 500-1800 RPM & 1000-3800 RPM

User questions & answers

Question:	Are there any holes in feet of lathe to anchor it to a bench
Answer:	You can remove the feet to anchor it.
Question:	Does this come with the light pictured
Answer:	The light pictures is included with the purchase for this unit.
Question:	Will a Nova G3 chuck fit this lathe
Answer:	Yes. It works perfectly.
Question:	How many jaws the head has
Answer:	Mine only has an MT#2 taper. You will have to purchase a jaw set with that taper.

Product features

Shop Fox W1836 Benchtop Wood Lathe

The Shop Fox W1836 Wood Lathe is packed with features that woodturners love. A powerful 3/4 HP motor with electronic variable-speed spindle control and a digital RPM readout for precise speed adjustments make this lathe a top choice.

24 Index Positions

24 index points in increments of 15 degrees allow evenly spaced marking or cutting while the headstock stays in a locked position, this opens new possibilities not available on many benchtop lathes.

Variable Speed Control

The W1836 features variable speed control for on-the-fly speed adjustments. Two overlapping speed ranges ensure maximum spindle torque within each range.

Heavy Duty Live Center

The W1836 includes an MT#2 live center so you can start turning spindles right away. The live center installs into the tailstock quill with a tapered fit and the over sized precision ball-bearing design ensures superior turning operations with stability and no resistance.

Cast Iron Tailstock

Quickly and easily adjust the tailstock to accommodate workpieces up to 15 inch in length. The tailstock is secured with a cam-action clamping system for a rock solid grip.

Tool Holder

This lathe features a convenient tool holder for storing your chisels, extra centers and other tools when not in use.

Optional Bed Extension

The optional D4562 Bed Extension can be added to get you the capacity of a much larger lathe at a fraction of the price. This extension bed increases the capacity of your W1836 Shop Fox Benchtop Wood Lathe to handle pieces up to 38 inch long, long enough for balusters and even baseball bats.