13 best mini wood lathe

Product description

Remember when you could turn your own pens? Fill your house with as many pens as you can with the WEN 8-inch by 12-inch variable speed mini wood Lathe. Adjust the variable speed anywhere from 750 to 3200 rotations per minute. The WEN 8-inch by 12-inch variable speed Benchtop wood Lathe features an MT1 spindle and Tailstock taper to tightly grip workpieces, two tool rests (4-1/2 inch and 7 inch) to provide needed support for chisels and tools during operation, and a 3.2-Amp motor to keep things turning. The easy-to-use Lever clamping system makes adjustments to both the tool rest and the Tailstock simple and precise. The WEN wood Lathe also includes a flat wrench, a headstock spur center, A Tailstock cup center, A knockout rod and a 2.3-Inch faceplate for non-spindle work pieces. And, because its a WEN product, your Lathe comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you could turn pens, chess pieces and more? Remember WEN.

• Perfect for pens, bowls, cups, chess pieces, and other small workpieces
• Fits workpieces up to 12 inches long and 8 inches wide
• 3.2-Amp motor provides over 50% more power than most 8-inch wood lathes
• Adjust the soft start variable speed motor anywhere from 750 to 3200 RPM
• Features a 2.3-Inch face plate, an MT1 spindle and tailstock taper, and two interchangeable tool rests

User questions & answers

Question:	Anybody know the thread size for the three tapped mounting holes on the underside of the lathe
Answer:	From their website: Benchtop mounting bolts: 0.30 Inch x 20 TPI (M8 x 1.25 pitch)
Question:	can you use a dedicated pen drilling chuck on this on this model 3420 or will it burn up the motor. I want to drill my blanks with it to
Answer:	I use a drilling chuck for all my pen blanks. As suggested, drill slowly, and frequently pull out the drill to remove shavings, as the blank may overheat and split.
Question:	How long did it take for you to get it? Says it ships in 2 months, with Prime
Answer:	When bought this lathe, they sent me 2. That being said, I got it when they said I would get it.
Question:	I'm interested in buy this lathe, does it run with 220 v or 150v, here were I'm living we run only 220. Waiting for answer, regards
Answer:	110

Product features

WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe

You will now easily be able to fit work pieces up to 12 inches long and 8 inches wide with the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe. The minimal design is ideal for pens, bowls, cups, chess pieces, and other small work pieces. You will be able to take on larger projects around your home with this tool.

Straightforward, Sturdy and Easy to Operate

With a stunning build quality, the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe provides sturdy frame for various work pieces. Made from cast iron, features a 2.3 inch face plate, an MT1 spindle and tailstock taper and two interchangeable tool rests for added versatility.

Product description

Features

- High-precision, stability, low noise.

- Designed for the home DIY enthusiasts, small and portable, strong power.

- Large torque ball bearing motor.

- Suitable for all small square or cylindrical timbers such as Pterocarpus santalinus, dalbergia odorifera, Thuja sutchuenensis, etc.

Specifications

Power:200W

Maximum processing length:140mm

Maximum processing width:50mm

Material: aluminum alloy

Maximum processing thickness 50 mm

Product size:310*60*65mm

Work way:manual

Voltage:DC12-24V

Adapter:

Input:110V-24V AC~50/60Hz 1.3A Max

Output:12/15/16/18/19V 4.5A Max 20/24V 5A Max

Adapter size:113*53*35mm

Package Included:

1x adapter

1x machine

1x 50mm Diamond Cutting Blade

1x 50mm HSS Cutting Piece

1x polishing wheel

5x sandpaper

1x caliper

1x grinding rod

3x drill

1x cable

6x carving blade

1x diamond blade connecting joint

1x high speed steel blade connecting joint

1x drill chuck wrench

1x Allen wrench

1x beads fixed needle 1.5/2.0/ 2.5MM

1x thread fixed needle

• Specially designed for the home DIY enthusiasts and hobbies,small and portable size with strong power.
• Super large torque ball bearing motor, maximum rotating speed up to 8000RPM providing ultra strong cutting power with low noise, you can use it at home.
• Transparent organic dustproof glass cover with super convective cooling hole, the welding line is covered with a full heat shrinkable tube.
• With 7 levels of power adapter enable you to adjust the rotating speed easily to meet different cutting speed.
• High quality aluminum alloy base and pure steel structure drill chuck.

User questions & answers

Question:	Can this be used in making wood turned pens
Answer:	It comes with the pieces to be able to perform all the functions that it displays, yes, however the size is on such a small scale that you are putting way more effort into trying to use this than you are getting out of it. This wasn't good for anything that I purchased it for, and isn't adaptable to larger scale pieces. Doesn't have a lot of power at all to perform any of the 'tasks' it boasts to accommodate.
Question:	can the chuck take 1/4 inch metal rod
Answer:	Don't buy from this company. The lathe they sent was very poorly made and we had an awful time returning it. Amazon had to get involved.
Question:	Is the chuck removable and if so, what is the diameter of the drive shaft
Answer:	It came with 1 tool
Question:	How is this machine cnc? is there a data port or card slot
Answer:	No, it doesn't. Actually I returned it unopened after buying it for this very reason. They were very understanding and refunded the full amount. As the description says it works well with "Plastic and Wood" but not metal.

Product description

1/3 Horsepower bench top lathe with variable speed motor

• Motor: 1/3 HP, 2 Amp, 110V, Single-phase, 60 Hz
• 12-inch distance between centers
• 8-inch swing over bed
• Cast iron construction and infinitely variable speed control
• Includes two tool rests

User questions & answers

Question:	I have a chuck that is 1"-8tpi female thread (nova 48111), it doesn't fit on this lathe. what adapter should i buy
Answer:	Buy a 3/4" 16 TPI to 1" 8 TPI adapter. If you further questions go to http://www.woodturningz.com/downloads/w1704_ds.pdf for the specs on this machine.
Question:	is there an adapter for the face plate for mounting live center chucks? I bought one but won't line up with holes
Answer:	I'm not sure if they make the adapter to mount on the face plat. I have a 2" diameter three jaw,self centering scroll type chuck that i bought from Amazon that ihave used that works great,but i think that the holes in the face plate is for mounting a backing block to the piece of wood stock to turn a bowl. It says in the manual that you glue the block to the wood your turning and use the holes to screw the block on to face plate. Hope this helped.
Question:	What size wood stock can it hold? How about something like 12'' long by 8" wide piece of wood
Answer:	The length it will hold will be dependant upon what chucks you have in the head and tail stock. The bulkier the chucks, the shorter the length it will handle. I'd say it will hold 12" lengths unless your chucks are sizable. I wouldn't try more than 4" width stock unless it was short. Although the lathe may hold the stock, it would be too much for the motor. The intended purpose of this lathe is to make small things like ink pens, Christmas ornaments, small toys like tops or yo-yo's and tool handles etc. If you want to mount 12" X 8" stock you should be looking at full sized lathes.
Question:	is there anyway to secure to a bench
Answer:	Yes. It has has three holes in the base that you can bolt it down with. I bolted mine down on a metal stand. It holds it down real solid. Mine is the Shop Fox W1704 also. It is well built. I really like mine. Hope this helps!

Product features

Shop Fox W1704 Benchtop Wood Lathe

Tackle pen turning or other small cutting or shaping projects using the Shop Fox W1704 bench-top lathe from Woodstock International. Made of cast iron, and designed to fit neatly on a workbench, this lathe features a 1/3-horsepower, variable-speed motor and delivers spindle speeds between 700 and 3,200 revolutions per minute (RPM). It also features a safety paddle switch, an MT No. 1 spur center, an MT No. 1 live center, 4-1/4-inch and 7-inch tool rests, a 5-3/4-inch faceplate, and a 3/4-by-16-inch TPI RH spindle.

Includes Two Tool Rests

The W1704 includes both a 4-1/2 and 7-inch tool rest for various turning applications and with a 13-inch distance between centers and an 8-inch swing over the bed this lathe is ideal for a variety of turning projects.

Variable Speed

The infinitely variable speed from 700-3200 RPM comes in handy when turning hard or soft species of wood.

5-3/4-inch Faceplate Included

This benchtop lathe includes a 5-3/4-inch faceplate which threads onto the headstock spindle for non-spindle turning (usually used for making bowls or other items that cannot be supported from the tailstock).

Product description

This is the video for how to use it: https://www.youtube.com/watch?v=Q03KevOqizM

Description:

This is a mini Buddha bead machine, compact and portable size, powerful woodworking lathe and beautiful appearance.

It also fits other DIY usage such as model,hobby DIY.

Specifications:

Material: Aluminum Alloy + Acrylic

Color: Silver

Plug Type: US Plug

Voltage: AC 100-240V 50/60Hz

Rated Voltage: 12-24V DC

Rated Power: 100W

Rated Speed: 1500-7000RPM

Power: 7 Level of Adjustable Speed

Processing Length: 140mm / 5.51in

Processing Diameter: 55mm / 2.16in

Chuck Clamping Range: 0.6-6.5mm / 0.02-0.25in

Swing Diameter: max 50mm / 2.0in

Grip Length: max 140mm / 5.51in

Matching Saw Blade Diameter: max 50mm / 2.0in

Machine Weight: 1436g / 3.17 lb

Package Included:

1x Mini Lathe Beads Machine

1x Speed Control Power Supply (12-24V)

6x Wood Carving Blade

1x Screw Thread Fixed Needle

3x Hex Shank Fixed Needle

1x Collet Wrench

1x Hexagon Wrench

3x Beads Round Device(12,18,22mm)

1x 50mm Cutting Piece

1x 50mm Diamond Cutting Piece

1x Polishing Plate

5x Polishing Piece

1x Polishing File Tool

1x Mini Caliper

NOTE:

1. If the user does not have lathe base experience, when using, uses should follow: low speed, slowly, cautiously and use other security operations.

2. The speed can be adjusted in 1500-7000RPM, speed of cutting wood should not exceed 4000, grinding can use higher speed.

3. Drill chuck axis, the axis of the wood, the tailstock center axis of the drill should be in a straight line, or need to adjust the nut.

4. If not a cylinder, the speed should be reduced.

5. Tailstock bearing without lock tight.

6. When using a knife, locking the bottom of screw, location should be away from timber 1-1.5cm.

• Specially designed for the home DIY enthusiasts and hobbies,small and portable size with strong power.
• Transparent organic dustproof glass cover with super convective cooling hole, the welding line is covered with a full heat shrinkable tube.
• With 7 levels of power adapter enable you to adjust the rotating speed easily to meet different cutting speed.
• High quality aluminum alloy base and pure steel structure drill chuck.
• Super large torque ball bearing motor, maximum rotating speed up to 7000RPM providing ultra strong cutting power with low noise, you can use it at home.

User questions & answers

Question:	Is this lathe just for producing beads? Or can it be used for other small projects
Answer:	Hello friend, Yes,of course it can be used for other small projects.As long as the the sizes of the tools match your project,this is a DIY tool set.
Question:	Can i make pens and rigs on it
Answer:	NO you can not make pens or rigs, there is not enough power to do anything on it.
Question:	is the plastic cover removable
Answer:	Hello friend, If you don't want the plastic cover,you can disassembly it with the screws.
Question:	I just bought this. How do i get it to fit my 5/8 mandrel. I bought this to make duck calls. But cant figure out what i need to make it fit.what do i
Answer:	Swap out chuck.

Product description

Parameter:

Material: aluminum alloy and Acrylic

Power: 100W

Voltage: 24V DC

Speed: 4000-8000 r / min, 7 grade speed

Size: 310* 60 * 70mm

Maximum turning diameter: 70mm.

Maximum clamping length: 180mm.

Chuck clamping range: 0.6-6mm.

Power Adapter：

Input: AC110V- 240V~50/60Hz 1.5A max

Output:12/15/16/18/19V 4.5A max; 20/24V 4A max

Wire length:1.1m+1.1m

Features:

High-precision, stability, low noise;

Designed for the home DIY enthusiasts, small and portable, strong power;

Transparent plexiglass shield, super convection cooling holes;

Large torque ball bearing motor.

Precautions:

1.If the user does not have lathe base experience, when used, should follow: low speed, slowly, cautiously and other security operations.

2.Drill chuck axis, the axis of the wood, the tailstock center axis of the drill should be in a straight line, or need to adjust the nut.

3.If not a cylinder, the speed should be reduced.

4.Tailstock bearing without lock tight.

5. When using a knife, locking the bottom of screw, location should be away from timber 1-1.5cm.

Package include:

1x Buddha Beads Lathe

1x Power Adapter

6x Wood carving set

3x Hex shanks(1.5mm,2mm,2.5mm)

Warm Notice: dear customers, your satisfaction is our top pursuit, if you receive any defective items, please never hesitate to contact us, we offer 30days return policy. thank you!

• Designed for the home DIY enthusiasts, small and portable, strong power, not suitable for mass production or commercial use.
• Power: 100W Voltage: 24V DC Material: aluminum alloy and Acrylic Speed: 5000-8000 r / min, 7 grade speed Size: 310* 60 * 70mm 3x Hex shanks(0.059inch,0.079inch,0.098inch)
• Maximum turning diameter: 70mm. Maximum clamping length: 180mm. Chuck clamping range: 0.6-6mm
• High-precision, stability, low noise, aluminum alloy materials, CNC machining.
• Thick aluminum base, acrylic dust cover motor. Transparent plexiglass shield, super convection cooling holes.

User questions & answers

Question:	I need a new tailstock center for my lathe like this. where can I get one please
Answer:	if you need a new tailstock center ! Please contact us at [email protected] ! We guarranty a satisfied solution to you.
Question:	Can this be used to turn hardwood
Answer:	so donot worry ! The mini lathe can turn hardwood !
Question:	Is there a longer bed available
Answer:	Yes you can buy this on amazon to the length you want. extruded aluminum t slot 1x2 then mount the motor and the end holder on to the new bed and ypur good. But at some point the motor will not be able to handle it so motor upgrade may be needed.
Question:	Can this be use for wood ring making
Answer:	I have used this for making wood rings, but primarily the sanding and polishing of bentwood rings made from painstakingly rolled wood veneer. Would not recommend for any kind of cutting, as it doesn't have the power.

Product description

Specifications: 

Power:200W 

Maximum processing length:140mm 

Maximum processing width:50mm 

Material: aluminum alloy 

Maximum processing thickness 50 mm 

Product size:310*60*65mm 

Work way:manual 

Voltage:DC12-24V 

Adapter: 

Input:110V-24V AC~50/60Hz 1.3A Max 

Output:12/15/16/18/19V 4.5A Max 20/24V 5A Max 

Adapter size:113*53*35mm 

Color: Shown as picture

Package list:Package list:

1x adapter 

1x machine 

1x 50mm Diamond Cutting Blade 

1x 50mm HSS Cutting Piece 

1x polishing wheel 

5x sandpaper 

1x caliper 

1x grinding rod 

3x drill 

1x cable 

6x carving blade 

1x diamond blade connecting joint 

1x high speed steel blade connecting joint 

1x drill chuck wrench 

1x Allen wrench 

1x beads fixed needle 1.5/2.0/ 2.5MM 

1x thread fixed needle

• ☪ Good choice for the both indoor and outdoor DIY enthusiasts, portable size enable users easy to carry.
• ☪ Nice designing, The large torque ball bearing motor, rotating speed range from 4000-9000RPM, can provid ultra strong cutting power with lower noise.
• ☪High-precision tailstock, flexible scaling adjustment. Transparent organic dustproof glass cover with super convective cooling hole, the welding line is covered with a full heat shrinkable tube.
• ☪ 7power levels adapter enable you to adjust the rotating speed to meet different cutting speed.It is easy and safe to operate.
• ☪ High quality aluminum alloy base and pure steel structure drill chuck.Multiple accessories for operating.

User questions & answers

Question:	can the seller send/email me a copy of the 'how to' manual in English
Answer:	sure...just been figuring it out as I go along. thank you that manual will come in handy for us
Question:	Is there an instruction manual for this product
Answer:	Yes, some stock we sold did not have mannual, but now we aaked the maunfcature to provide. you will get a mannual if you buy it in the future. if you buy now, you can contact me after you bought, we will sen d you a file about the products.
Question:	When can I expect to receive the instruction manual
Answer:	You can contact us if there is no mannual. and i will send you a instruction file through the reply message, usually within 24 hours.
Question:	is the center tailstock MT1 or MT
Answer:	sorry we do not know. But, my husband says that the tailstock that came with it...did not fit!@!@

Product description

If pen turning is your passion, then you'll appreciate the incredible utility you'll get from the PENPAL Pen Making Lathe. At only 15lbs, this fully featured pen turning workhorse easily travels outside the home or conveniently goes or stores pretty much anywhere in your house or outside. Use as a 2nd lathe always ready for sanding, finishing or making extra pens. Precision engineered and easy to set up and use. Equipped with a 2" Dust Collection Hood for cleaner air and less dust. Fitted with a heavy duty tool rest pre-set to minimize adjustment. Contains mounting holes and flange to securely mount or clamps your lathe to almost any surface. Made of extruded anodized aluminum. Variable speed from 0 - 4300 RPM. Number 1 Morse taper in tailstock. Headstock contains a collet type mandrel.

• 1/5hp 110V variable speed motor (0-4300 rpm); Lightweigh (15 lbs); Portable; Small footprint (20x6x6 inches)
• Headstock threaded to 3/4" x 16tpi; Tailstock uses #1 Morse Taper mount (1MT)
• Anodized aluminum base with mounting holes and flange to mount lathe on most surfaces; Swing over bed 5-1/2"
• Includes: pen mandrel shaft with collet closer nut for mounting, mandrel saver, 7mm bushings, 7mm drill bit, collet wrenches
• Also includes: mini dust collection hood with 2" port, 2" hose clamp, and hood mounting bracket

User questions & answers

Question:	Does the tailstock have a MT#1 or #2 that can accept a drill chuck for blank drilling on the lathe
Answer:	mt#1
Question:	what is the largest blank that can fit into the lathe
Answer:	This is a pen lathe and not useful as any thing else unless turning doll furniture. A 6 to 7 inch blank is about max
Question:	Does this lathe have forward and reverse controls
Answer:	No, it only spins in one direction. It only has an on/off switch and a variable speed control knob.
Question:	Is a pen mandrel included with lathe purchase
Answer:	It comes with a collet type mandrel. This is a very lightweight lathe with lots of speed, but not much torque. I found it a bit under powered. Suitable for most woods, but not for acrylics. This is not my primary lathe, but one that I can easily take when we are traveling in our motor home.

Product description

Features:

Made of high quality material, anti-corrosion and durable.

Multi-functional lathe with compact size, high precision, stability and low noise.

Easy to use, good mechanical performance and long service time.

Suitable for polishing beads of beeswax, pearl, jade, plastic, wood, etc.

Designed for the home woodworking, beads processing, DIY handcraft and etc.



Specification:

Model: T300

Material: Aluminum

Weight: 1492g/52.6oz

Type: woodworking lathe

Working Mode: manual

Rated Voltage: DC 24V

Rated Power: 0.96kw

External Dimension: 60*300mm

Maximum Machining Length: 120mm

Maximum Machining Thickness: 30mm

Maximum Machining Width: 30mm



Package List:

1 x Lathe

1 x Thread Fixing Needle

3 x Internal Hex Fixing Needle

6 x Carving Knife

1 x Chuck Wrench

• ✿✿✿✿【Superior Product】The Lathe Polisher Machine is made of high quality material, anti-corrosion and durable.Multi-functional lathe with compact size, high precision, stability and low noise, aluminum alloy materials, CNC machining. High quality aluminum alloy base and pure steel structure drill chuck.
• ✿✿✿✿【Perfect Design&Convenient】Thick aluminum base, acrylic dust cover motor. Plexiglass shield, super convection cooling holes. Super large torque ball bearing motor, maximum rotating providing ultra strong cutting power with low noise, you can use it at home.
• ✿✿✿✿【Important Parameters】Material: Aluminum. Rated Voltage: DC 24V. Rated Power: 0.96kw. External Dimension: 60*300mm. Maximum Machining Length: 120mm. Maximum Machining Thickness: 30mm. Maximum Machining Width: 30mm. Package Include: 1 x Lathe; 1 x Thread Fixing Needle; 3 x Internal Hex Fixing Needle; 6 x Carving Knife; 1 x Chuck Wrench.
• ✿✿✿✿【Widely Application】This Lathe Polisher Machine is suitable for polishing beads of beeswax, pearl, jade, plastic, wood, etc. It is designed for the home woodworking, beads processing, DIY handcraft and etc.Designed for the home DIY enthusiasts, small and portable, strong power, not suitable for mass production or commercial use.
• ✿✿✿✿【100% Satisfaction Guarantee】Free Refund in 7 Days!!! If your product does not perform to your expectations, simply request a refund or replacement. We care for every customer's feeling. If this product does not meet or exceed your expectations, please contact us at first, we will solve the problem immediately. We expect quality products, At the same time, we hope that customers have the best shopping experience.

User questions & answers

Question:	This does not come with a power cord. What kind of power cord adaptor is required
Answer:	Dear customer, hello, you only need to equip the voltage adapter suitable for your country.

Product description

Ideal chisel kit for turning pens pepper mills spindles bowls and lots more woodturning projects of all sizes Each chisel measures 16-1/4" in length with a 6-1/4" M2 High Speed Steel blade and a 10" hardwood turned handles Set includes chisels 3/16" Parting Tool 5/8" Spear Scraper 1" Skew Chisel 5/8" Skew Chisel 5/8" Round Nose Scraper 1/2" Bowl Gouge 3/4" Spindle Gouge 7/8" Roughing Gouge Includes wooden case for storage and carrying Great for woodworkers woodturners and penturners of all skill levels

From the Manufacturer

We have assembled this 8-piece set to satisfy the majority of your turning needs. It is suitable for turners of all skill levels. It is the ideal kit for turning small pens, spindles, bowls and larger projects. The M2 High Speed Steel 5-1/4-Inch blades outlast high carbon steel 6-to-1 and will give you years of use. The set includes 8 essential chisels: 3/16-Inch Parting Tool, 5/8-Inch Spear Scraper, 1-Inch Skew Chisel, 5/8-Inch Skew Chisel, 5/8-Inch Round nose scraper, 1/2-Inch Bowl Gouge, 3/4-Inch Spindle Gouge, 7/8-Inch Roughing Gouge. It also comes with beautifully turned 10-3/4-Inch hardwood handles in an attractive wood display box

• Ideal chisel kit for turning pens pepper mills spindles bowls and lots more woodturning projects of all sizes
• Each chisel measures 16-1/4" in length with a 6-1/4" M2 High Speed Steel blade and a 10" hardwood turned handles
• Set includes chisels 3/16" Parting Tool 5/8" Spear Scraper 1" Skew Chisel 5/8" Skew Chisel 5/8" Round Nose Scraper 1/2" Bowl Gouge 3/4" Spindle Gouge 7/8" Roughing Gouge
• Includes wooden case for storage and carrying
• Great for woodworkers woodturners and penturners of all skill levels

User questions & answers

Question:	Do i need to have a high speed bench grinder or slow speed
Answer:	Slower is better than higher. Try not to use a wheel that is lower than 80 grit. 100 seems best. If you go up to high, you end up heating the tool too much.
Question:	are these benjamins best
Answer:	Yes, these are the Benjamins Best tools. I'm enjoying them very much.
Question:	What type of grinding wheel should I use to sharpen these chisels, being made with M2 High Speed Steel
Answer:	For scrapers and gouges, I use a belt sander. For skews and bedans I use a wet stone grinder. I use a polishing wheel with emery compound to hone all my blades between sharpenings.
Question:	Are these "Benjamins Best" (as recommended by Wood Magazine)? Description doesn't say
Answer:	My set has "Benjamins Best" stamped right on the handles.

Product features

HSS Wood Lathe Chisel Set

We've assembled this 8 piece set to satisfy the majority of your turning needs suitable for turners of all skill levels. An ideal kit for turning pens or much larger projects on lathes of any size. The set includes 8 essential chisels with beautifully turned hardwood handles packaged in a practical and attractive wood display box.

Product description

Parameter:

Material: aluminum alloy and Acrylic

Power:96W

Voltage: DC12V-24V

Speed: 4000-9000 rpm / min, 7 grade speed

Size: 11.81x2.36 x2.75inch

Maximum turning diameter: 70mm.

Maximum saw blade diameter: 50mm.

Chuck clamping range: 0.6-6mm.

AC Adapter：

Input: 110V- 240V~50/60Hz 1.5A max

Output:12/15/16/18/19V 4.5A max;

20/24V 4A max

Wire length:39.37inch+39.37inch

Features:

High-precision, stability, low noise;

Designed for the home DIY enthusiasts, small and portable, strong power;

Large torque ball bearing motor.

Precautions: 1.If the user does not have lathe base experience, when used, should follow: low speed, slowly, cautiously and other security operations.

2.Drill chuck axis, the axis of the wood, the tailstock center axis of the drill should be in a straight line, or need to adjust the nut.

3.If not a cylinder, the speed should be reduced.

4.Tailstock bearing without lock tight.

5. When using a knife, locking the bottom of screw, location should be away from timber 0.39-0.59inch.

Package include:

1x Mini Lathe Machine

1x Power Adapter

3x Hex shanks(1.5mm,2mm,2.5mm)

1x Screw Thread Fixed Needle

1x Collet Wrench

1x Hexagon Wrench

6x Wood Carving Blade

1x 50mm Cutting Piece

1x 50mm Diamond Cutting Piece

5x Polishing Piece

1x polishing wheel

• Material: Aluminum alloy and Acrylic
• Power:Voltage: DC12V-24V;Power :96W;Speed: 4000-9000/rpm;
• Specification：Chuck: 0.6-6mm；Maximum turning diameter: 70mm；Maximum saw blade diameter: 50mm
• Designed for the home DIY enthusiasts, small and portable, strong power, not suitable for mass production or commercial use.
• With 7 levels of power adapter enable you to adjust the rotating speed easily to meet different cutting speed.

Product description

Specifications:

Material: Aluminum Alloy + Acrylic

Color: Silver+Black

Plug Type: US Plug

Voltage: AC 110V /60Hz

Rated Voltage: 12-24V DC

Rated Power: 100W

Rated Speed: 1500-7000RPM

Power: 7 Level of Adjustable Speed

Processing Length: 140mm / 5.51in

Processing Diameter: 55mm / 2.16in

Chuck Clamping Range: 0.6-6.5mm / 0.02-0.25in

Swing Diameter: max 50mm / 2.0in

Grip Length: max 140mm / 5.51in

Matching Saw Blade Diameter: max 50mm / 2.0in

Machine Size: 325 * 65 * 70mm / 12.8 * 2.6 * 2.8in

Machine Weight: 1436g / 3.17 lb

Package Size: 37 * 14 * 14cm / 14.6 * 5.5 * 5.5in

Package Weight: 1734g / 3.82 lb



Package included:

1 * Mini Lathe Beads Machine

1 * Speed Control Power Supply (12-24V)

6 * Wood Carving Blade

1 * Screw Thread Fixed Needle

3 * Hex Shank Fixed Needle

1 * Collet Wrench

1 * Hexagon Wrench



NOTE:

1. If the user does not have lathe base experience, when using, uses should follow: low speed, slowly, cautiously and use other security operations.

2. The speed can be adjusted in 1500-7000RPM, speed of cutting wood should not exceed 4000, grinding can use higher speed.

3. Drill chuck axis, the axis of the wood, the tailstock center axis of the drill should be in a straight line, or need to adjust the nut.

4. If not a cylinder, the speed should be reduced.

5. Tailstock bearing without lock tight.

6. When using a carving blade, locking the bottom of screw, location should be away from timber 1-1.5cm.

7. If you do not really understand the operation, it is best to consult a professional person.

• ✅ 【HIGH PRECISION】- Super large torque ball bearing motor, maximum rotating speed up to 7000RPM providing ultra strong cutting power with low noise, you can use it at home.
• ✅ 【PROFESSIONAL DESIGN】- Power 100W; Voltage: 12-24V DC; Material: high quality aluminum alloy base and pure steel structure drill chuck. With 7 levels of power adapter enable you to adjust the rotating speed easily to meet different cutting speed.
• ✅ 【DURABLE】- Stainless steel dust cover motor, not only it is beautiful and atmospheric, but also it play a role of anti-bumping, durable and sturdy.
• ✅ 【PORTABLE】- Designed for the home DIY enthusiasts, small and portable, strong power, not suitable for mass production or commercial use.
• ✅【 WIDELY USE】- Perfect electric drill for cutting, engraving, milling, grinding, polishing, cleaning and drilling. Suitable for engraving and grinding of wood, stone, peach, egg, crafts, glass, ceramics and other materials.

User questions & answers

Question:	Can small drill bits be attached
Answer:	NOT SURE ... IF THE ATTACHMENT WILL FIT INTO THE COLLAR?
Question:	can I turn Aluminum tubing on this
Answer:	I wouldn't, RPMs are pretty high. I got mine to turn rifle brass and had to buy a separate speed control to slow it down.
Question:	Can this be used to turn pens? I’m looking for a new hobby. If not, do you recommend a set for a beginner that includes everything needed (including a
Answer:	This machine is suitable for all kinds of Buddhist beads, sorry that we do not recommend using this item for pens. Also we are sorry that we don't have a tool set for a beginner for your new hobby at present. Hoping my answer is helpful to you. If there is any uncertainty, please feel free to contact us. (*^▽^*) Best regards

Product description

Perform vertical spindle turning on your multi-speed drill press with this Lathe Attachment. Easy setup means quick change over from drill press mode to lathe mode. A 12-Inch tool rest allows a maximum work piece length of 24-Inch when the work piece is reversed.

From the Manufacturer

Perform vertical spindle turning on your multi-speed drill press with this Lathe Attachment. Easy setup means quick change over from drill press mode to lathe mode. A 12-Inch tool rest allows a maximum work piece length of 24-Inch when the work piece is reversed.

• Includes a base plate with live center, 12-Inch tool rest, mounting bolts, mini screw center and spur center
• Fits all drill presses with a through hole in the table
• Tool rest length: 12"
• Maximum workpiece length: 24"
• Maximum workpiece diameter: 6"

User questions & answers

Question:	Could you polish a crankshaft on it
Answer:	No work light, but this is a pretty amazing drill press. Easy enough to clip one one. The radial aspect of it makes it very versatile. You can drill much further towards center of a longer piece, the tilting head is much more accurate and easy to use than a tilting table. Needs to be secured to the floor pretty good. I made a base out of a half sheet of 3/4 plywood with 2 X 6 flat framing. I would not trade it for another. Had a few in the past, this one far exceeds any of them.
Question:	How wide of an item could you work with this system? Could you do the base of a small bowl with it
Answer:	I don't think it's supposed to be noisy?
Question:	Is it dificult to center
Answer:	It's about 3-1/2" with both nuts on. If you need more travel remove nuts and use a needle nose Visegrip.
Question:	I have an 8 inch drill press will it work on mine
Answer:	It is too top heavy with the radial head for free standing. I took a 1/2 sheet of 3/4 plywood, I "framed" it underneath with 2 x 6 laying flat, put a cross member where the front set of base bolts when and then bolted the base to the frame. This gave me a big enough base to keep it stable. Works great, I can slide the drill press aside when not using it.

Product features

Woodstock D4088 Lathe Attachment for Drill Press

Perform vertical spindle turning on your multi-speed drill press with this Lathe Attachment. Easy setup means quick changeover from drilling mode to turning mode. A 12 inch tool rest allows a maximum work piece length of 24 inch when the work piece is reversed.

Base Plate with Live Center

The D4088 includes a base plate with live center for smooth turning operations. The 12 inch tool rest provides plenty of leverage for your tuning needs.

Easy-to-Install

Included with this lathe attachment are mounting bolts for easy installation on a drill press table. Also included is a mini screw center and spur center. This lathe attachment will fit all drill presses with a through hole in the table.

Turn a Range of Stock

The Model D4088 Drill Press Lathe Attachment allows wooden workpieces to be turned on a drill press in the same manner as a wood lathe, only vertically rather than horizontally. Items like small pickets, legs, spindles, candle holders, salt and pepper shakers, handles, dowels, and pins can be made.

Multi Speed Drill Press

The lathe attachment is designed for use with drill presses that offer multiple speeds. This allows for a greater variety of stock to be turned and allows for safer operation when roughing, shaping and finishing.

Product description

JET JWL-1221VS 12"x21" Variable-Speed Wood Lathe (719200)

• VERSATILITY: 24 integrated indexing positions.
• CONVENIENCE: Easy-to-reach controls and DRO.
• OPTIMAL SPEED: Choose from 60 to 3,600 RPM.
• INNOVATION: Ratchet-style belt tension system (patent pending).
• ON-BOARD STORAGE: Two handy tool caddies.

User questions & answers

Question:	Will 1221 tail stock accept #2 Morse taper drill chuck
Answer:	Yes! Just be sure that the tail stock hole and morse taper are clean, otherwise the #2 morse taper can be difficult to remove...
Question:	has this lathe have a indexing head
Answer:	William, yes this lathe has an indexing head. I have not yet used the feature but it is done with a spring loaded pin which you lock into anyone of 24 positions. The spring loaded pin in screwed in once the pin is set to hold it in place.Rich F
Question:	Is this Ron Swanson approved
Answer:	Yes, Ron personally blesses each unit as it’s loaded onto a truck.
Question:	Do you need to move a belt to change speeds? Or is there a dial or switch
Answer:	This lathe has a variable speed controller, so the speeds may be changed using the simple rotating knob. To provide speed ranges to suit any situation, especially for the more experienced turner, there is a three step pulley. This arrangement allows the variable speed controller to adjust speeds from 60 to 900 rpm on the low step of the pulley, 110 -1800 rpm on the 2nd step (medium), and a high speed range of 220 -3600 rpm on the the 3rd step. The belt need only be changed if you want to move to a different range of speeds. This is a very simple process.

Product features

JET 12'' X 21'' Variable Speed Wood Lathe - JWL-1221VS

The JET 1221VS lathe is different from anything we’ve made before. In truth, it’s different from anything that anybody has ever made before. The design is better. The features are better. The entire turning experience is better. And it all focuses on one concept … Control.