14 best midi lathes

Product description

1/3 Horsepower bench top lathe with variable speed motor

• Motor: 1/3 HP, 2 Amp, 110V, Single-phase, 60 Hz
• 12-inch distance between centers
• 8-inch swing over bed
• Cast iron construction and infinitely variable speed control
• Includes two tool rests

User questions & answers

Question:	I have a chuck that is 1"-8tpi female thread (nova 48111), it doesn't fit on this lathe. what adapter should i buy
Answer:	Buy a 3/4" 16 TPI to 1" 8 TPI adapter. If you further questions go to http://www.woodturningz.com/downloads/w1704_ds.pdf for the specs on this machine.
Question:	is there an adapter for the face plate for mounting live center chucks? I bought one but won't line up with holes
Answer:	I'm not sure if they make the adapter to mount on the face plat. I have a 2" diameter three jaw,self centering scroll type chuck that i bought from Amazon that ihave used that works great,but i think that the holes in the face plate is for mounting a backing block to the piece of wood stock to turn a bowl. It says in the manual that you glue the block to the wood your turning and use the holes to screw the block on to face plate. Hope this helped.
Question:	What size wood stock can it hold? How about something like 12'' long by 8" wide piece of wood
Answer:	The length it will hold will be dependant upon what chucks you have in the head and tail stock. The bulkier the chucks, the shorter the length it will handle. I'd say it will hold 12" lengths unless your chucks are sizable. I wouldn't try more than 4" width stock unless it was short. Although the lathe may hold the stock, it would be too much for the motor. The intended purpose of this lathe is to make small things like ink pens, Christmas ornaments, small toys like tops or yo-yo's and tool handles etc. If you want to mount 12" X 8" stock you should be looking at full sized lathes.
Question:	is there anyway to secure to a bench
Answer:	Yes. It has has three holes in the base that you can bolt it down with. I bolted mine down on a metal stand. It holds it down real solid. Mine is the Shop Fox W1704 also. It is well built. I really like mine. Hope this helps!

Product features

Shop Fox W1704 Benchtop Wood Lathe

Tackle pen turning or other small cutting or shaping projects using the Shop Fox W1704 bench-top lathe from Woodstock International. Made of cast iron, and designed to fit neatly on a workbench, this lathe features a 1/3-horsepower, variable-speed motor and delivers spindle speeds between 700 and 3,200 revolutions per minute (RPM). It also features a safety paddle switch, an MT No. 1 spur center, an MT No. 1 live center, 4-1/4-inch and 7-inch tool rests, a 5-3/4-inch faceplate, and a 3/4-by-16-inch TPI RH spindle.

Includes Two Tool Rests

The W1704 includes both a 4-1/2 and 7-inch tool rest for various turning applications and with a 13-inch distance between centers and an 8-inch swing over the bed this lathe is ideal for a variety of turning projects.

Variable Speed

The infinitely variable speed from 700-3200 RPM comes in handy when turning hard or soft species of wood.

5-3/4-inch Faceplate Included

This benchtop lathe includes a 5-3/4-inch faceplate which threads onto the headstock spindle for non-spindle turning (usually used for making bowls or other items that cannot be supported from the tailstock).

Product description

JET JWL-1221VS 12"x21" Variable-Speed Wood Lathe (719200)

• VERSATILITY: 24 integrated indexing positions.
• CONVENIENCE: Easy-to-reach controls and DRO.
• OPTIMAL SPEED: Choose from 60 to 3,600 RPM.
• INNOVATION: Ratchet-style belt tension system (patent pending).
• ON-BOARD STORAGE: Two handy tool caddies.

User questions & answers

Question:	Will 1221 tail stock accept #2 Morse taper drill chuck
Answer:	Yes! Just be sure that the tail stock hole and morse taper are clean, otherwise the #2 morse taper can be difficult to remove...
Question:	has this lathe have a indexing head
Answer:	William, yes this lathe has an indexing head. I have not yet used the feature but it is done with a spring loaded pin which you lock into anyone of 24 positions. The spring loaded pin in screwed in once the pin is set to hold it in place.Rich F
Question:	Is this Ron Swanson approved
Answer:	Yes, Ron personally blesses each unit as it’s loaded onto a truck.
Question:	Do you need to move a belt to change speeds? Or is there a dial or switch
Answer:	This lathe has a variable speed controller, so the speeds may be changed using the simple rotating knob. To provide speed ranges to suit any situation, especially for the more experienced turner, there is a three step pulley. This arrangement allows the variable speed controller to adjust speeds from 60 to 900 rpm on the low step of the pulley, 110 -1800 rpm on the 2nd step (medium), and a high speed range of 220 -3600 rpm on the the 3rd step. The belt need only be changed if you want to move to a different range of speeds. This is a very simple process.

Product features

JET 12'' X 21'' Variable Speed Wood Lathe - JWL-1221VS

The JET 1221VS lathe is different from anything we’ve made before. In truth, it’s different from anything that anybody has ever made before. The design is better. The features are better. The entire turning experience is better. And it all focuses on one concept … Control.

Product description

Remember when you could turn your own pens? Fill your house with as many pens as you can with the WEN 8-inch by 12-inch variable speed mini wood Lathe. Adjust the variable speed anywhere from 750 to 3200 rotations per minute. The WEN 8-inch by 12-inch variable speed Benchtop wood Lathe features an MT1 spindle and Tailstock taper to tightly grip workpieces, two tool rests (4-1/2 inch and 7 inch) to provide needed support for chisels and tools during operation, and a 3.2-Amp motor to keep things turning. The easy-to-use Lever clamping system makes adjustments to both the tool rest and the Tailstock simple and precise. The WEN wood Lathe also includes a flat wrench, a headstock spur center, A Tailstock cup center, A knockout rod and a 2.3-Inch faceplate for non-spindle work pieces. And, because its a WEN product, your Lathe comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you could turn pens, chess pieces and more? Remember WEN.

• Perfect for pens, bowls, cups, chess pieces, and other small workpieces
• Fits workpieces up to 12 inches long and 8 inches wide
• 3.2-Amp motor provides over 50% more power than most 8-inch wood lathes
• Adjust the soft start variable speed motor anywhere from 750 to 3200 RPM
• Features a 2.3-Inch face plate, an MT1 spindle and tailstock taper, and two interchangeable tool rests

User questions & answers

Question:	Anybody know the thread size for the three tapped mounting holes on the underside of the lathe
Answer:	From their website: Benchtop mounting bolts: 0.30 Inch x 20 TPI (M8 x 1.25 pitch)
Question:	can you use a dedicated pen drilling chuck on this on this model 3420 or will it burn up the motor. I want to drill my blanks with it to
Answer:	I use a drilling chuck for all my pen blanks. As suggested, drill slowly, and frequently pull out the drill to remove shavings, as the blank may overheat and split.
Question:	How long did it take for you to get it? Says it ships in 2 months, with Prime
Answer:	When bought this lathe, they sent me 2. That being said, I got it when they said I would get it.
Question:	I'm interested in buy this lathe, does it run with 220 v or 150v, here were I'm living we run only 220. Waiting for answer, regards
Answer:	110

Product features

WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe

You will now easily be able to fit work pieces up to 12 inches long and 8 inches wide with the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe. The minimal design is ideal for pens, bowls, cups, chess pieces, and other small work pieces. You will be able to take on larger projects around your home with this tool.

Straightforward, Sturdy and Easy to Operate

With a stunning build quality, the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe provides sturdy frame for various work pieces. Made from cast iron, features a 2.3 inch face plate, an MT1 spindle and tailstock taper and two interchangeable tool rests for added versatility.

Product description

The best 10" lathe for your money. ETL Listed and certified by Intertek. Powered by a 3/4 hp high performance motor and an SBC microprocessor, developed for automotive applications, delivering precision control and lasting reliability. 3/4 hp Variable Speed Motor (110V). Two belt positions: Position A 500-2000 RPM & Position B 1500-3600 RPM. Digital readout allows you to work at precise speeds. Headstock Thread is 1" x 8tpi. Headstock and Tailstock Taper is #2MT. Distance between Centers is 18". Swing over Bed is 10". Tailstock and Spindle Bore is 3/8". Quill Travel is 1-5/8". (24) indexing positions with spindle locking. Included: tool storage rack, work light with 18" flex cable, 6" tool rest, 12" tool rest, 3" Faceplate, Spur Drive Center, Tailstock Live Center, Hex Wrench(set of 4), Rubber feet, Knockout Rod, Phillips Screw Driver, Tailstock handle & bolt, Safety Goggles. Convenient built-in handles. Cast Iron base accepts optional extension bed for turning projects up to 42". Motor may run faster/slower.

• KWL-1018VS replaces TCLC10VS. ETL Listed and certified by Intertek
• Powered by 3/4 hp Variable Speed high performance motor(110V) & an SBC microprocessor. Two belt positions: 500-2000 RPM & 1500-3600 RPM
• Headstock Thread 1" x 8tpi. Headstock/Tailstock Taper #2MT. Distance between Centers 18". Swing over Bed 10". Cast iron base
• Tailstock & Spindle Bore 3/8". Quill Travel 1-5/8". (24) indexing positions with spindle locking. Convenient built-in handles
• See Description below for all of the included parts

User questions & answers

Question:	What is the largest size bowl I can turn using this
Answer:	This lathe has a 10" swing over the bed so the maximum size would be a 10" diameter bowl blank. Your finished bowl would then be slightly smaller depending on how much material was turned.
Question:	Under product description it says measurement system is metric? What is metric on this
Answer:	Nothing is measured in the metric system. That listing detail is incorrect.
Question:	Where can i purchase a belt
Answer:	Penn State Industries
Question:	how or where do you get the extension bed up to
Answer:	Item TCLC10XB is the extension bed for both lathes KWL-1018 and KWL-1018VS. Item TCLC12XB2 is the extension bed for lathe KWL-1218VS.

Product description

10" x 18" Lathe #70-105 was designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is constructed of cast iron so vibration is not a factor, unlike other lathes made of aluminum. 5 Speed ranges cover the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing. Lathe includes a live center, tool rest, knock-out bar and wrenches.

• Rikon mini lathe: This Rikon mini lathe features a ½ motor that provides ample power for all turning needs. With a 10” swing and 18” between centers, this mini lathe also has a self ejecting tail stock and has easy access to speed change.
• Sturdy and Dedicated: Designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is made from cast iron, so vibration is not a factor, unlike other lathes made of aluminum.
• 5 speed ranger: This mini lathe has a 5 speed range that covers the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing.
• Includes: This lathe includes a live center, tool rest, knock-out bar, and wrenches.

User questions & answers

Question:	Does the headstock have a morse taper and also the tailstock
Answer:	Yes they are both #2 taper
Question:	Does this lathe have a 1 inch 8tpi
Answer:	yes
Question:	Does Rikon or another manufacturer make a steady rest for this lathe
Answer:	Carter products and Ron Brown's Best (Peacetree), make steady rests suitable for. 10 inch lathes. Carter Products is about $375 and Ron Brown's Best is about $160. I believe either can be adapted to Rikon 105, 10" lathe.
Question:	can a veriabule speed drive add to this lathe
Answer:	You can buy a conversion kit from Penn State. It comes with a new motor and electronics. Note that the lowest speed is 650 vs 500 RPM which is faster that recommended if you use Cole Jaws.

Product description

12-1/2" x 24" VSR MIDI Lathe. 1HP motor delivers all the power you need for turning spindles to large bowls or platters.. Big turning capacity of 12-1/2" diameter swing and 20" between centers.. 24 Postion Index head allows accurate pattern or design work on projects.

• 1HP motor delivers all the power you need for turning spindles to large bowls or platters.
• Big turning capacity of 12-1/2" diameter swing and 20" between centers.
• 24 Postion Index head allows accurate pattern or design work on projects.
• Electronic variable speeds 250-3850RPM with LED display and forward/reverse functions.

User questions & answers

Question:	What taper is the headstock and talestock
Answer:	Hi W James,Both are #2 Morse tapers. Hope that helps!
Question:	What is the tool post diameter
Answer:	Tool post dia. is 1"
Question:	Wich are the dimensions of the lathe
Answer:	Thank you for your questions Jose T. The machine dimensions are 40-3/4" L x 12" W x 17-5/8" H. I hope this helps.
Question:	Does the head have a 1 x 8 thread pattern
Answer:	Hello Robert,Yes, it is 1" x 8 TPI. Good question.

Product description

Ideal chisel kit for turning pens pepper mills spindles bowls and lots more woodturning projects of all sizes Each chisel measures 16-1/4" in length with a 6-1/4" M2 High Speed Steel blade and a 10" hardwood turned handles Set includes chisels 3/16" Parting Tool 5/8" Spear Scraper 1" Skew Chisel 5/8" Skew Chisel 5/8" Round Nose Scraper 1/2" Bowl Gouge 3/4" Spindle Gouge 7/8" Roughing Gouge Includes wooden case for storage and carrying Great for woodworkers woodturners and penturners of all skill levels

From the Manufacturer

We have assembled this 8-piece set to satisfy the majority of your turning needs. It is suitable for turners of all skill levels. It is the ideal kit for turning small pens, spindles, bowls and larger projects. The M2 High Speed Steel 5-1/4-Inch blades outlast high carbon steel 6-to-1 and will give you years of use. The set includes 8 essential chisels: 3/16-Inch Parting Tool, 5/8-Inch Spear Scraper, 1-Inch Skew Chisel, 5/8-Inch Skew Chisel, 5/8-Inch Round nose scraper, 1/2-Inch Bowl Gouge, 3/4-Inch Spindle Gouge, 7/8-Inch Roughing Gouge. It also comes with beautifully turned 10-3/4-Inch hardwood handles in an attractive wood display box

• Ideal chisel kit for turning pens pepper mills spindles bowls and lots more woodturning projects of all sizes
• Each chisel measures 16-1/4" in length with a 6-1/4" M2 High Speed Steel blade and a 10" hardwood turned handles
• Set includes chisels 3/16" Parting Tool 5/8" Spear Scraper 1" Skew Chisel 5/8" Skew Chisel 5/8" Round Nose Scraper 1/2" Bowl Gouge 3/4" Spindle Gouge 7/8" Roughing Gouge
• Includes wooden case for storage and carrying
• Great for woodworkers woodturners and penturners of all skill levels

User questions & answers

Question:	Do i need to have a high speed bench grinder or slow speed
Answer:	Slower is better than higher. Try not to use a wheel that is lower than 80 grit. 100 seems best. If you go up to high, you end up heating the tool too much.
Question:	are these benjamins best
Answer:	Yes, these are the Benjamins Best tools. I'm enjoying them very much.
Question:	What type of grinding wheel should I use to sharpen these chisels, being made with M2 High Speed Steel
Answer:	For scrapers and gouges, I use a belt sander. For skews and bedans I use a wet stone grinder. I use a polishing wheel with emery compound to hone all my blades between sharpenings.
Question:	Are these "Benjamins Best" (as recommended by Wood Magazine)? Description doesn't say
Answer:	My set has "Benjamins Best" stamped right on the handles.

Product features

HSS Wood Lathe Chisel Set

We've assembled this 8 piece set to satisfy the majority of your turning needs suitable for turners of all skill levels. An ideal kit for turning pens or much larger projects on lathes of any size. The set includes 8 essential chisels with beautifully turned hardwood handles packaged in a practical and attractive wood display box.

Product description

Remember when you could turn bowls, cups, chess pieces, table legs and more? It’s time to turn some heads with the WEN 12-Inch by 18-Inch Variable Speed Wood Lathe. Boasting a 4.5A motor, this beast handles wood up to 18 inches long and 12 inches in diameter. If you need to take on anything larger, the WEN 3424EX Bed Extension can be purchased separately to increase the maximum capacity from 18 inches all the way up to 41 inches. Adjust the variable speed anywhere from 450 to 3500 rotations per minute with the onboard digital speed display illuminating the current RPM. The WEN Variable Speed Wood Lathe also features an MT2 spindle and tailstock taper for compatibility with all your favorite chucks and centers, along with a spacious 8-inch tool rest to provide support for your chisels and tools. The easy-to-use lever clamping system makes adjustments to both the tool rest and the tailstock simple and precise. Soft startups prevent damage to both your workpiece and your motor. And, because its a WEN product, your lathe comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you could turn heads with your woodturning? Remember WEN.

• Adjust the variable speed anywhere from 450 to 3500 rotations per minute
• Attack workpieces up to 12 inches wide and 18 inches long
• Soft startups prevent damage to both your workpiece and the 4.5-amp motor
• Includes a digital speed display, an 8-inch tool rest, a face plate, a live center, a spur center, and a two-year warranty
• Increase the capacity to 12 x 41 inches with the WEN 3424EX Table Extension (sold separately)

User questions & answers

Question:	Why is there a forward and reverse button on it
Answer:	There is a forward and reverse button on the model 34034..
Question:	Is it reversible
Answer:	No. Just variable speed.
Question:	multi directional
Answer:	No this is not multi directional
Question:	Does this tilt so you can make bigger projects than a 14in
Answer:	I have no clue what you mean by does it tilt. Probably Bc I'm not a woodworker, but I do know the end peice comes off and u could potentially make something bigger but you would need to find a way to stabilize the other end. Also, I'm turning plaster and once I go longer than 9in the machine will shutter. Hope this helped.

• 【550W POWERFUL MOTOR】- The powerful motor starts softly ensuring motor's maximize safety and low noise. 550W provide great power for the lathe operation.
• 【UNRIVALED SPEED CONTROL】- Turning speed control knob clockwise or counterclockwise to adjust the speed freely within 500-3800 RPM. MT2 Spindle. It is easy to read via digital speed display.
• 【LARGE WORK CAPACITY】- 18" (460mm) distance between centers, swing over bed 10" (254mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.
• 【CAST IRON CONSTRUCTION】- Cast iron constructed wood lathes for durability and strength, providing increased stability and smooth operation. Extremely sturdy cast iron construction to reduce vibration.
• 【PROFESSIONAL TOOL RESTS】- Moving the lock lever to adjust or replace the tool rest. 6" (150 mm) tool rests for easy replacement, ideal for a variety of turning projects in labs, workshops, engineering education, etc.

User questions & answers

Question:	What is the warranty on this lathe
Answer:	One year
Question:	is there somewhere I can find an owner’s manual
Answer:	Go to harbor freight web sight look up central machianery 10x18 lathe it has a pdf for the owners manual it's the same machine as the morphon
Question:	My motor burned out, where do I get a replacement
Answer:	Good luck with that. The control switch burned out on mine and after communicating with them for awhile to arrange a fix they just stopped answering by emails. All my emails to them and Amazon went unanswered. Now all I have is a boat anchor. I only had it 3 or 4 months. Good luck.
Question:	what is the spindle thread
Answer:	Depending on what you are trying adapt to your spindle , you should not need a adapter just make sure its a 1" x 8tpi . I made the mistake of buying an adapter 33x3.5 to1"x8tpi and it wont fit down the spindle shaft again just a 1"x 8tpi for a self centering jaw or any other plate,ect.ect plus try not to use adapters if you can

Product features

Powerful Motor

550W Power motor, turning speed 500-3800 RPM, Voltage: 120V/60Hz. Our powerful motor starts softly to offer motor's maximize safety and low noise design.

Variable Speed

Optimally designed speed ranges of 500-3800 RPM variable speed. MT2 Spindle.

Large Work Capacity

Distance between centers: 18" (460mm). Swing over bed: 10" (254mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.

Stable Operation

Mini lathes constructed by cast iron are of increased stability and smooth operation.

Interchangeable Tool Rests

6" (150 mm) tool rest can be adjusted to any position and direction for various needs in turning applications.

Wide Application

Benchtop wood lathe, an ideal tool for use in labs, workshops, engineering, and education.

10'' x18'' Benchtop Wood Lathe

The premier quality wood lathe features with a powerful motor with electronic variable-speed spindle control and a digital RPM readout for precise speed adjustments, make this lathe a top choice. Heavy-duty cast iron construction and rubber feet provide increased stability and smooth turning operation.

Product description

The new JET 1015VS is an ideal choice for the novice woodturner looking for an affordable, user-friendly first lathe, as well as the advanced enthusiast or professional who wants to add a full-featured mini-lathe to the shop. This sturdy, smooth-running 15" mini-lathe has the power, precision and versatility to turn out any number of projects. When you're ready to make your ideas a reality... Start Here.

• 15-1/2" BETWEEN CENTERS
• THREE SPEED RANGES: 200-1,050 / 300-1,750 / 600-3,600
• INTEGRATED 24-POSITION INDEXING
• EASY ACCESS TO BELTS: Improved tensioning system
• INCREASED RIGIDITY: Wider bed ways

User questions & answers

Question:	Does this lathe come with a stand
Answer:	No but one if available as an accessory.
Question:	Can I get parts in Canada for this lathe? Can it be shipped to canada
Answer:	CPO Outlets does not ship to Canada. For support in Canada, please contact Jet directly for guidance at 888-274-6848.
Question:	How accurate is the headstock to tailstock alignment
Answer:	As best I can tell, on mine it is very accurate.
Question:	Does this lathe have a reverse
Answer:	No, mine doesn’t. The larger, more expensive models may.

Product features

JET 10" x 15" Variable Speed Wood Lathe - JWL-1015VS

The new JET 1015 is an ideal choice for the novice woodturner looking for an affordable, user-friendly first lathe, as well as the advanced enthusiast or professional who wants to add a full-featured mini-lathe to the shop. This sturdy, smooth-running 15” mini-lathe has the power, precision and versatility to turn out any number of projects. When you're ready to make your ideas a reality... Start Here.

Product description

As a market leader in woodturning, Powermatic is proud to offer the powerful PM2014 model lathe. Only requiring a 115V single-phase power source, the inverter delivers 1HP, 230V, 3PH performance, giving users maximum speed with minimum input. With a capacity of 14" swing over bed and 20" between centers which can be increased with the optional 13" bed extension.



Premium sliding headstock feature allows greater clearance when positioned at the end of the bed for outboard turning. Robust cast iron bed reduces vibration when turning larger and rougher pieces. Digital Indexing and spindle speed readout are clearly visible on the magnetic repositionable control box.

• VERSATILITY: 24 positive locking indexing positions simplifies the indexing process.
• CONVENIENCE: Magnetic control box, with digital display, can be placed anywhere on the lathe body.
• STABILITY: Cast iron bed reduces motor vibration for decreased noise and added precision.
• HANDY STORAGE: Attached tool caddy holds centers, wrenches, and accessories.
• COMFORT: Ergonomic, chrome-trimmed hand wheels provide a comfortable feel.

User questions & answers

Question:	Does the Powermatic 2014 bench top lathe have reverse in motor
Answer:	Yes, it does. Both speed and direction controls are located in the auxiliary control box, which mounts magnetically at any convenient point.
Question:	How is the bed attached to benchtop? Can't see in the available pics
Answer:	There are 8 threaded holes on the underside of the bed for bolts that pass through whatever surface the lathe is mounted on.
Question:	Made in what country
Answer:	It's assembled in Taiwan.

• 【370W POWER MOTOR】- 370W Power pure copper motor, turning speed 1400RPM, Voltage: 230V. The powerful  motor starts softly offering motor's maximize safety and low noise.
• 【UNRIVALED SPEED CONTROL】- Turning speed control knob clockwise or counterclockwise to adjust speed freely within 500-3200 RPM, including 5 grate speed: 760/1100/1600/2200/3200RPM. MT2 Spindle.
• 【LARGE WORK CAPACITY】- 18" (457mm) distance between centers, swing over bed 10" (254 mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.
• 【CAST IRON CONSTRUCTION】- Cast iron constructed wood lathes for durability and strength, providing increased stability and smooth operation. Extremely sturdy cast iron construction to reduce vibration.
• 【PROFESSIONAL TOOL RESTS】- Moving the lock lever to adjust or replace the tool rest. 150mm and 300mm tool rests for easy replacement, ideal for a variety of turning projects in labs, workshops, engineering education, etc.

Product features

Powerful Motor

370W Power motor, turning speed 1400RPM, Voltage: 230V. Our powerful 1A motor starts softly to offer motor's maximize safety and low noise design.

Variable Speed

Optional speeds: 760/1100/1600/2200/3200RPM. MT2 Spindle.

Large Work Capacity

18" (457 mm) distance between centers, swing over bed 10" (254 mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.

Stable Operation

Cast iron constructed mini lathes is of increased stability and smooth operation.

Interchangeable Tool Rests

Two different-sized tool rests with 150mm & 300mm for various needs in turning applications.

Wide Application

Bench top wood lathe, an ideal tool for use in labs, workshops, engineering and education.

10 x 18 Inch Variable Speed Benchtop Mini Wood Lathe & Variable Speed 500-3200RPM & Rubber Feet

Our 18 in. x 10 in. Variable Speed Benchtop Mini Wood Lathe features variable speed 500-3200 RPM, a 370W motor and an MT2 spindle. Soft startups ensure safety to both workpieces and the motor. Precise design is perfect for various uses in labs, workshops, engineering and education.

Product description

Do you want a lathe that’s as versatile as your turning? The 1440 lathe from JET can be tailored to accomplish a wide range of projects. With a sliding and pivoting headstock, variable speed, and many other great features this lathe meets the needs of woodturners. Experience the JET 1440 lathe and see how versatility takes shape.

• VARIABLE SPEED: 400 to 3,000 RPM
• HEADSTOCK PIVOTS 360° WITH 7 POSITIVE LOCKING POSITIONS
• EASY-TO-READ RPM DISPLAY
• POSITIVE LOCKING TOOL REST WITH REDESIGNED CLAMPING
• CSA CERTIFIED

User questions & answers

Question:	up to 60" with optional extension bed": what is the length capacity as is
Answer:	1440 is 14 around max and 40” long
Question:	does jet 1440 have a forward-reverse switch
Answer:	No, this model does not have a reverse switch.
Question:	Does this unit run on 110 or 220 and how many amps does it require
Answer:	110v and is less than 15 amps.
Question:	Does this come with any drill chucks
Answer:	No, sold separately.

• 【1/2 HORSE POWER MOTOR】- 1/2 Horse Power motor, Voltage: 120V. The powerful  motor starts softly offering motor's maximize safety and low noise.
• 【4 GRADE SPEEDS】- The adjustable belts can be adjust with ease and accuracy within 3400 RPM, 1100, 1600, 2300, 3400prm available.
• 【LARGE WORK CAPACITY】- 40" (1000mm) distance between centers, Cutting Diameter 14" (350mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.
• 【SOLID STEEL CONSTRUCTION】- Solid steel constructed wood lathes for durability and strength, providing increased stability and smooth operation, reducing vibration.
• 【FREE WRENCHES & CHISELS】- 3 wrenches are for easy using and maintainance. 3 chisels for free also, 1 x Skew Chisel, 1 x Shear Scraper and 1 x Spindle Gouge.

User questions & answers

Question:	Can you do aluminum
Answer:	It was not be cost effective because you would need too many attachments. You’d have to modify the tool rest. It would turn it but you couldn’t hold the tool to turn it without modifications. There are lathes out there built for using with aluminum. Hope this helps
Question:	Will the wen la4444 4-inch 4 jaw self centering chuck set with -inch x 8 tpithread fit this lathe
Answer:	https://www.amazon.com/gp/product/B000KI8CBQ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 This is what you need
Question:	does this brand and model come in 220 volt
Answer:	Only 110 volts
Question:	What are the minimum and maximum clamping measurements
Answer:	0 to 40 inches

Product features

Powerful Motor

1/2 Horse Power motor, Voltage: 110V, starts softly to offer motor's maximize safety and low noise design.

Variable Speed

Optimally designed speed ranges of 1100-3400 RPM variable speed.

Large Work Capacity

40" (1000mm) distance between centers, swing over bed 14" (350mm). High concentricity.

Accurate & Stable

Steel constructed mini lathes is of increased stability and smooth operation.

7W LED Work Light

3 wrenches are for easy using and maintainance. 3 chisels for easy carving work.

Wide Application

Wood turning lathe, an ideal tool for various operations such as cutting, sanding, knurling, drilling, or deformation.

14 in. x 40 in. Wood Turning Lathe & Variable Speed 3400RPM

Our 14 in. x 40 in. Variable Speed Wood Turning Lathe features variable speed 1100-3400 RPM, a 1/2hp motor. Soft startups ensure safety to both workpieces and the motor. Precise design is perfect for high speed sanding and polishing of finished work.