11 best key duplicator machines

Product description

USB Duplicator that is Advanced asynchronous duplication which means no waiting and no interruption as each channel can independently load, unload, and copy. This is a fully standalone USB Flash Memory Drive duplication machine that does not required a computer to operate.

The duplicator features a 4-key control with LCD that offer real time display of detailed information and user friendly interface to confirm successful copies. High Speed performance that can even handle the most demanding jobs.

USB flash memory pen drives are used to distribute content or product information at presentations, to customers, internally within the organization or for photos, data, files, videos or music.

1:7 USB Drive Duplicator is fast and easy to operate. Advanced asynchronous duplication means no waiting and no interruption as each channel can independently load, unload, and copy.

This neat feature allows each channel to function independently and copies directly from 128MB of built-in memory so there is no need to start and end a copy cycle at the same time. Source Analysis feature identifies the content on the master and intelligently copies only the data to speed up copy cycle. Fast, reliable, convenient and cost-effective to operate, Acumen Disc USB duplicators help you to get more done in less time!

Features

Support up to 7 copies of USB Flash Memory Drives

Standalone turnkey system; no computer required.

No warm-up and cool-down

User friendly interface and simple operation

Real-time display of detailed information on bright LCD screen

Support all file formats, file size, and card capacity.

Support Synchronous and Asynchronous copy modes

High speed copy up to 35MB/sec

Real time copy and compare technology to ensure successful and complete copies.

IMPORTANT NOTE: Will only works with Standard-A USB Flash Memory Drives. Will not work with other form of USB connections

• Support up to 7 copies of USB Standard-A Flash Memory Drives; Transfer speed Up To 35mb/sec (actual transfer speed depends on the USB Key)
• Standalone turnkey system; no computer required;No warm-up and cool-down
• User friendly interface and simple operation; Real-time display of detailed information on bright LCD screen
• Support all file formats, file size, and drive capacity;Support Synchronous and Asynchronous copy modes
• Note: This Internal USB Duplicator only supports USB Standard A memory devices that are USB-IF compliant. If you are making duplication copies by using USB devices that are not USB-IF compliant, the USB Duplicator may not function properly. The USB Duplicator will also not work with hardware encrypted/protected USB memory devices.

Product features

Acumen Disc USB / External HDD Duplicator

Insert a USB Flash Memory on the intended slot. Make sure all the Pen Drives are the same capacity size and you're ready to go!

Duplicates External Hard Drives

As long as the external Hard Drive Enclosures have its own power source (connecting to a wall outlet), it can utilize the duplicator via USB slot.

Easy 4-button controller

Our 4-button controller is specially design to give you an easy and convenient way to operate the machine

Copying Speed up to 35MB/s

The copy speed of Tower Combo Duplicator is up to 35MB/s or 2.1GB/min. The copy speed will remain the same even if the number of load is increased.

In today’s competitive business environment, higher efficiency allows you to stand out from the others. While PC can only go up to 15mb per second for one copy, the copying speed of these SD Duplicators can go up to 35mb per second every slot

Asynchronous and Synchronous Copy Modes

The duplicator does not have to wait for all blank target memory card(s) to be inserted in order to start the copy process.

Data from your source memory card is stored into the system memory buffer, allowing the copy process to start immediately once any number of target memory card(s) are inserted into the duplicator.

Powerful Quality Check

POWERFUL QUALITY CHECK

H3 Read Test

H5 Write/Read Test H6 Cyclic Unused Area Write/Read Test H7 Fake Card Test

6 Testing Criteria

Test range/ Bad sector ratio/ Read speed threshold/ Write speed threshold/ Capacity threshold/ Format type

4 Testing Results

Bad sector quantity / Tested capacity / Average read speed / Average write speed

*These functions are optional

Product description

◕‿◕Made of fine quality material, practical, easy to install and use, wide application range, has a long service life.



◕‿◕Specifications:

★Material: ABS

★Color: beige

★Type: 1, 2 (optional)

★Battery: 4 * AAA battery (not included)

★Input voltage: 5V

★Standby power consumption: 50uA

★Operating power consumption: 120mA

★Item size: 170 * 60 * 31mm / 6.7 * 2.4 * 1.2in

★Item weight: 137g / 4.8ounce

★Package size: 225 * 150 * 62mm / 8.9 * 5.9 * 2.4in

★Package weight:

★Type 1: 289g / 10.2ounce

★Type 2: 372g / 13.1ounce



◕‿◕Supported Intelligent Card:

★IC, MF1, S50, S70, I-D, TK4100, EM4100, HI-D26, HI-D35, HI-D37, GI-D64, GI-D50, GI-D40, GI-D32, GI-D16, SI-D64, SI-D50, SI-D40, SI-D32, 125KHz-13.56MHz



◕‿◕Supported Blank Copy Card:

★It supports almost all blank copy cards, including UI-D, FUI-D, CUI-D, ZXUI-D, EUI-D, ICUI-D, E5500, E5550, T5577, EM4305, EL8265, 5200, 6200, 7200, 8200, 6608, 6609, 7325, 4366, 8348, 9823, 9834, I-D435, 2346 etc.



◕‿◕Features:

★Full decode function, breaking the IC card to encrypt the whole defense.

★Automatic stepless full frequency sweep, so that offset frequency card can not hide.

★Built-in password database and upgrade procedures, has unlimited potential.

★Full-color large screen, voice prompts, the perfect user experience.

★With WiFi network decoding function, it can be decoded without a computer.

★Compact and lightweight, easy to use and carry.



◕‿◕Package list: (optional)

Type 1:

1 * Intelligent Card Key Machine

1 * USB Cable

1 * User Manual

Type 2:

1 * Intelligent Card Key Machine

8 * 125KHz H-I-D Card

6 * 13.56MHz Rewritable UI-D Keyfob

1 * USB Cable

1 * User Manual

• ◕‿◕Full decode function, breaking the IC card to encrypt the whole defense.
• ◕‿◕Automatic stepless full frequency sweep, so that offset frequency card can not hide.
• ◕‿◕Built-in password database and upgrade procedures, has unlimited potential.
• ◕‿◕Full-color large screen, voice prompts, the perfect user experience. Compact and lightweight, easy to use and carry.
• ◕‿◕With WiFi network decoding function, it can be decoded without a computer.

Product description

◕‿◕Made of fine quality material, practical, easy to install and use, wide application range, has a long service life.



◕‿◕Specifications:

★Material: ABS

★Color: beige

★Type: 1, 2 (optional)

★Battery: 4 * AAA battery (not included)

★Input voltage: 5V

★Standby power consumption: 50uA

★Operating power consumption: 120mA

★Item size: 170 * 60 * 31mm / 6.7 * 2.4 * 1.2in

★Item weight: 136g / 4.8ounce

★Package size: 225 * 150 * 62mm / 8.9 * 5.9 * 2.4in

★Package weight:

★Type 1: 301g / 10.6ounce

★Type 2: 384g / 13.5ounce



◕‿◕Supported Intelligent Card:

★IC, MF1, S50, S70, I-D, TK4100, EM4100, HI-D26, HI-D35, HI-D37, GI-D64, GI-D50, GI-D40, GI-D32, GI-D16, SI-D64, SI-D50, SI-D40, SI-D32, 125KHz-13.56MHz



◕‿◕Supported Blank Copy Card:

★It supports almost all blank copy cards, including UI-D, FUI-D, CUI-D, ZXUI-D, EUI-D, ICUI-D, E5500, E5550, T5577, EM4305, EL8265, 5200, 6200, 7200, 8200, 6608, 6609, 7325, 4366, 8348, 9823, 9834, I- D435, 2346 etc.



◕‿◕Features:

★Full decode function, breaking the IC card to encrypt the whole defense.

★Automatic stepless full frequency sweep, so that offset frequency card can not hide.

★Built-in password database and upgrade procedures, has unlimited potential.

★Full-color large screen, voice prompts, the perfect user experience.

★Compact and lightweight, easy to use and carry.



◕‿◕Package list: (optional)

Type 1:

1 * Intelligent Card Key Machine

1 * USB Cable

1 * User Manual

Type 2:

1 * Intelligent Card Key Machine

6 * 13.56MHz Rewritable UI-D Keyfob

8 * 125KHz HI-D Card

1 * USB Cable

1 * User Manual

• ◕‿◕Full decode function, breaking the IC card to encrypt the whole defense.
• ◕‿◕Automatic stepless full frequency sweep, so that offset frequency card can not hide.
• ◕‿◕Built-in password database and upgrade procedures, has unlimited potential.
• ◕‿◕Full-color large screen, voice prompts, the perfect user experience.
• ◕‿◕Compact and lightweight, easy to use and carry.

Product description

.Check and comparision Frequency and Date; 

.Copy fixed code remote control and parts of rolling code remote control; 

.Generate  new remote controls including garage door and auto brands; 

.Free online update regularly; 

.Chinese and English  bilingual; 

.More than 20 different programmed remotes for your choice; 

.100%quality assurance resulted from quality inspection door remote contrl in all processes of manufacturing; 

.100%after sale service for door remote control; 

.OEM or ODM cooperation to customers for all kinds of door remote control.

• .This machine can programme most of branded garage door remote,home automation remote from Europe and United States,include CAME,BFT,NICE,SOMMER and so on;
• .This machine can programme our null code remote into the branded remote,then the remote working completely functions as the original branded remote;You must buy the null code remote from our company,the machine can not programme the null-code remote from other company;
• .Copy fixed code remote control and parts of rolling code remote control;Check and comparision Frequency and Date;
• .Generate new remote controls including garage door and auto brands;Free online update regularly;
• .English Version,More than 20 different programmed remotes for your choice;100% quality assurance resulted from quality inspection door remote control in all processes of manufacturing.

User questions & answers

Question:	Will it copy Card access to remote
Answer:	Both camera models have a time lapse feature.

Product description

Can duplicate various hollowness type, wave type, three or four amount cylindrical key and key for multi lock.

• Can duplicate various hollowness type, wave type, 3 or 4 amount cylindrical key for multi lock.

Product description

This is a Creative Handheld RFID Card Reader RFID Copier with Full Decode Function which breaking through the limitations of encryption cards in the past.



Product Feature

1. Full decode function, breaking the IC card to encrypt the whole defense.

2. Automatic step less full frequency sweep,so that offset frequency card can not hide

3. Built-in password database and upgrade procedures,has unlimited potential

4. Support mainland China,Taiwan,Europe,Southeast Asia,ID/IC Smart Card

5. HD 3.2 inch full color screen,clear display/voice prompts,the best user experience

6. Has USB interface

7. ID, IC full-band,voice broadcast (125KHz, 250KHz, 375KHz, 500KHz, 625KHz, 750KHz, 875KHz, 1000KHz, 13.56MHz)

8. Support card type: Support IC, MF1,ID, TK4100, EM4100, HID26, HID35, HID37, GID64, GID50, GID40, GID32, GID16, SID64, SID50, SID40, SID32,125KHZ,13.56MHZ.

9. It supports hundreds of smart cards including Asia, Europe, America, Southeast Asia, Affrica, Australia etc.



Specifications:

Material: ABS plastic

Input Voltage: 5V

Power Consumption: 120 mA

Working with 4 AAA battery(not including in the package)



Package Including:

1 * Card Copier

1 * USB cable

5 * UID Card

5 * T5577 Tag

1 * English User Manual

• 1.Handheld and portable.Full color large screen, voice prompt, bring you the best user experience.
• 2.Working with 4 AAA battery(not including in the package) or USB
• 3.Automatic stepless full frequency sweep, easily captures the offset frequency card.
• 4.Built-in password database,full decode function, Cracks IC card for the whole encryption protection.
• 5.It supports almost all of the blank copy cards, including UID, FUID, CUID, ZXUID, EUID, ICUID, E5500, E5550, T5577, EM4305, EL8265, 5200, 6200, 7200, 8200, 6608, 6609, 7325, 4366, 8348, 9823, 9834, ID435, 2346, etc

Product description

This standalone USB duplicator lets you clone or erase two flash drives without connecting to a host computer.

1:2 Drive Duplication

The USB cloner lets you copy up to two drives simultaneously. It offers asynchronous and synchronous duplication, with speeds of up to 1.5GB per minute. Asynchronous duplication lets you remove and replace a drive while the other drive continues to copy.

The duplicator features two duplications modes: system and file or whole drive. System and file provides reduced duplication times. It copies partitions and stored data but ignores any sections with empty space. Whole drive takes more time because it does a sector-by-sector (mirror image) duplication of the drive. This duplication mode is ideal when you need to capture everything on the drive, including hidden data.

Erase Two Drives Simultaneously

The USB flash drive duplicator lets you wipe USB drives two at a time and supports several erase modes including: quick-erase, full-erase and secure-erase.

Secure-erase meets global requirements, including the new NIST (SP 800-88 Rev1) standards, ensuring that all drives are properly wiped.

Easy to Use

The standalone USB duplicator features an LCD display so that you can monitor erasing and duplication to ensure completion. It also has four shortcut keys for easy operation.

USBDUP12 is TAA compliant and backed by a StarTech.com 2-year warranty with free lifetime technical support.

• DUPLICATE OR ERASE TWO USB DRIVES: The standalone USB duplicator lets you duplicate or wipe two USB drives simultaneously, without having to connect to a host computer.
• NO NEED TO WAIT: The USB cloner supports both asynchronous and synchronous duplication. Asynchronous duplication lets you remove and replace a drive while the other drive continues to copy.
• TWO DUPLICATION MODES: The USB flash drive duplicator supports two duplication modes, system-and-file or whole-drive. You can save time and copy over partitions and stored data using system and file duplication mode. Or you can create a mirror image of your drive and perform a sector-by-sector duplication using whole-drive duplication mode.
• SECURELY WIPE YOUR USB DRIVES: The USB memory stick duplicator and eraser supports several erase modes including quick-erase, full-erase and secure-erase. Secure-erase meets global requirements, including the new NIST (SP 800-88 Rev1) standards, ensuring that all drives are properly wiped.
• EASY TO USE: The USB thumb drive copier features an LCD display so that you can monitor erasing and duplication to ensure completion. It also has four shortcut keys for easy operation.

User questions & answers

Question:	Does this support SD card duplication if used with 5 USB SD card readers? If so, any specific reader that it would have the drivers for
Answer:	It will duplicate CD's and DVD's. This thing works great!! My wife and her friends have probably done over 200 copys of family recordings from weddings to graduations. Super simple and very quick.
Question:	can i duplicate memory cards with this
Answer:	It will burn both CD and DVD. But not blueray
Question:	is this battery powered
Answer:	This by far has been a really good burner out if the box I did not have to add anything just put my master disk and load blanks in the other 5 drives, total 6 drives one for master and the rest for copies..... I have burned over 2000+ dvds and not a single failure...
Question:	Will this unit have any issues copying 54 gbs of data onto a 64 gb drive, or 60 gb of data onto a 124 gb usb drive
Answer:	It is suppose to be able to burn dual layer disks Todd... BUT I had a duplicator similar to this one for several years and if you are trying to duplicate a custom dual layer video you could run into an issue. When you burn a custom video (lets say a 2 hr wedding video), your computer will auto switch over to the second layer to burn... DVD's that you purchase do this too, usually during a scene change... but these DVD's are mass stamped so the switch over point is never a concern because it is always in the same place. On a dual layer duplicator the switch over point is not recorded in the same spot because the duplicator always slightly compresses the video... the problem this causes can be "skipping" of the video as it looses contact with the data that keeps the laser tracking the video during playback. Basically the duplicator will record the original "switch over spot" as a "blip" as the duplicator selects a different spot to switch over to in the process. I do not know if the technology has changed since the older duplicator I had... and I haven't tested this one yet... but the issue I think is a valid one for you to consider. If you are just duplicating data and not a dual layer video then you should have no issues what so ever.

Product features

1:2 Drive Duplication

The USB cloner lets you copy up to two drives simultaneously (synchronous duplication) with speeds of up to 1.5GB per minute. It also offers asynchronous duplication which lets you remove and replace a drive while the other drive continues to copy.

The duplicator features two duplication modes: system-and-file, or whole-drive. System and file provides reduced duplication times, copying partitions and stored data while ignoring any sections with empty space. Whole-drive provides a sector-by-sector (mirror image) duplication of the drive. This duplication mode is ideal when you need to capture everything on the drive, including hidden data.

Erase Two Drives Simultaneously

The USB flash drive duplicator lets you wipe USB drives two at a time and supports several erase modes including:

• Quick erase
• Full erase
• Secure erase

Easy to Use

The standalone USB duplicator features an LCD display so that you can monitor erasing and duplication to ensure completion. It also has four shortcut keys for easy operation.

Product description

The JET JWL-1015 is an ideal choice for the novice woodturner looking for an affordable, user-friendly first lathe, as well as the advanced enthusiast or professional who wants to add a full-featured mini-lathe to the shop. This sturdy, smooth-running 15” mini-lathe has the power, precision and versatility to turn out any number of projects. When you're ready to make your ideas a reality... start here.

• 15-1/2" BETWEEN CENTERS
• SIX SPINDLE SPEEDS: 500/840/1,240/1,800/2,630/3,975
• Integrated 24-position indexing
• IMPROVED TENSIONING SYSTEM: Easier access to belts.
• INCREASED RIGIDITY: Wider bed ways.

User questions & answers

Question:	Can you add an extendion table on it to turn long spindel legs
Answer:	Yes! You just can't buy it on amazon..rockler and woodcraft sell them for around $150.
Question:	Is it a Morse taper
Answer:	Yes both the head stock and tail are #2
Question:	what is needed with this lathe for pen turning
Answer:	Basically, you will need a 7mm MT2 mandrel and your tools. When you order your pen kits, make sure you get the bushings and drill bit. Depending on how you finish the pens, you may need a buffing system. For acrylics, get a set of micro pads, they really bring the shine out. I also use a "french polish" and shellac to put a lasting hard coat on the finished product. Good luck and enjoy the lathe.
Question:	what is the thread size on the head stock
Answer:	Headstock Spindle Thread is 1" x 8 TPI.Complete data sheet is here:http://content.jettools.com/assets/manuals/719100_man_EN.pdf

Product description

JET JWL-1221VS 12"x21" Variable-Speed Wood Lathe (719200)

• VERSATILITY: 24 integrated indexing positions.
• CONVENIENCE: Easy-to-reach controls and DRO.
• OPTIMAL SPEED: Choose from 60 to 3,600 RPM.
• INNOVATION: Ratchet-style belt tension system (patent pending).
• ON-BOARD STORAGE: Two handy tool caddies.

User questions & answers

Question:	Will 1221 tail stock accept #2 Morse taper drill chuck
Answer:	Yes! Just be sure that the tail stock hole and morse taper are clean, otherwise the #2 morse taper can be difficult to remove...
Question:	has this lathe have a indexing head
Answer:	William, yes this lathe has an indexing head. I have not yet used the feature but it is done with a spring loaded pin which you lock into anyone of 24 positions. The spring loaded pin in screwed in once the pin is set to hold it in place.Rich F
Question:	Is this Ron Swanson approved
Answer:	Yes, Ron personally blesses each unit as it’s loaded onto a truck.
Question:	Do you need to move a belt to change speeds? Or is there a dial or switch
Answer:	This lathe has a variable speed controller, so the speeds may be changed using the simple rotating knob. To provide speed ranges to suit any situation, especially for the more experienced turner, there is a three step pulley. This arrangement allows the variable speed controller to adjust speeds from 60 to 900 rpm on the low step of the pulley, 110 -1800 rpm on the 2nd step (medium), and a high speed range of 220 -3600 rpm on the the 3rd step. The belt need only be changed if you want to move to a different range of speeds. This is a very simple process.

Product features

JET 12'' X 21'' Variable Speed Wood Lathe - JWL-1221VS

The JET 1221VS lathe is different from anything we’ve made before. In truth, it’s different from anything that anybody has ever made before. The design is better. The features are better. The entire turning experience is better. And it all focuses on one concept … Control.

Product description

Parameter:

1.Input voltage:12VDC

2.Input current:2A

3.Power:24W

4.Motor speed:20000rev/min

5.Processing materials length: 135mm.

6.Processing materials maximum diameter: 45mm.

7.The transformer has over-current, over voltage, over temperature protection.



Package Included:

1 x Set Miniature Metal Multifunction Machine

• Application:Wood, plastic, soft metals (aluminum, copper, etc.). Softwood, hardwood
• You can use the three-jaw chuck or collet (1 ~ 6mm) clamping the workpiece, center gongs high 25mm, center distance of 135mm.
• Motor speed:20000rev/min
• The transformer has over-current, over voltage, over temperature protection.
• 1 YEAR WARRANTY: If you have any issues with this product, please feel free to contact us

User questions & answers

Question:	Where do we purchase replacement cutting bits, blades, etc or does this thing use same as full size tools
Answer:	Don’t waste your money. The picture they use is meant to deceive people into thinking it is the whole thing. They will only send you the drill head NOT the lathe.
Question:	Does the chuck have a pass through hole 10mm or larger for longer rods to be used in the lathe? I need to be able to size down 230mm length rods
Answer:	Hello,Thank you for you interest. It's 110-120Volt. If you have any other questions, feel free to send us a message.Thank you.
Question:	What size cutters does this use
Answer:	I've been able to hold .005 with not really trying if I got serious I could hold .001 get good endmills though
Question:	Does this unit run on 12v or is it 120v
Answer:	No it is just the head. The lathe is not included and would be required to mount the head.

Product description

This Model M1015 Mini-Lathe is a perfect lathe for someone who wants a durable and well-designed machine that can fit in a small location. This Mini-Lathe gives model makers, toolmakers, gun hobbyists, and the weekend machinist a way to economically produce small precision parts, threaded parts, fittings, and dies. Made in an ISO 9001 factory.

• 4 hex wrenches, 100-2000 RPM spindle speed:
• MT #2 spindle taper, MT #1 tailstock taper
• Double ended wrench, socket head wrench
• Oil cup, stand Included
• Chuck key, 3 external jaws

User questions & answers

Question:	Is this lathe suitable for turning brair tobacco pipe stummels and vulcanite stems
Answer:	Mine came with inserts for every tool and one spare insert. I had that same question and I was pleasantly surprised when the package arrived.
Question:	I am a blade smith and would like Know if i could make handles and blade work
Answer:	Dear person, Each tool holder uses a particular insert. Not knowing what tool holder you have I can not give a precise answer. Please provide the tool holders model, typically is written in the tool holder itself
Question:	Will this fit on a worktable that's 43 inches in length and 27 and a half inches wide
Answer:	Bright enough. The light is very durable. It’s not cheaply made. The long neck allows good placement and is strong. The best is the small head - doesn’t obscure visibility. I’ve ordered 8 of these lights so far for the plant floor and will be buying 20 more in the next 6 months or so.
Question:	where this machine made???can do steel and aluminum stuff?or wood only
Answer:	We recommend 32'' bag. The 25'' maybe a little bit small.

Product features

Shop Fox M1015 Micro Lathe

This Model M1015 Mini-Lathe is a perfect lathe for someone who wants a durable and well-designed machine that can fit in a small location. This Mini-Lathe gives model makers, toolmakers, gun hobbyists, and the weekend machinist a way to economically produce small precision parts, threaded parts, fittings, and dies.

Convenient Control Panel

The M1015 control panel conveniently located for easy access contains a variety of functions for lathe operation. Functions such as the rotation selector knob, speed dial and clutch knob allow for a variety of adjustments to accommodate your turning needs.

Auto and Manual Feed

The M1015 features a manual feed handwheel which moves the carriage left or right along the bed. This control is helpful when setting up the machine for turning or when manual movement is desired during turning operations. Easily engage and disengage the feed from automatic to manual feed with the feed clutch.

Thread Cutting

This lathe has the ability to cut threads of 16, 18, 19, 20, and 24 threads per inch. Included is a gear ratio threading chart to help you determine which gears to use to acquire your desired threads per inch.

Feature Packed

Created for the mini machine enthusiast, the M1015 has all the features and precision you demand for small scale turning. In fact, it''s the perfect machine for scale model building. It includes a 3-inch three jaw chuck and thread gears, and a full selection of optional accessories is also available for a wide variety of setups.

Feed Rates

The M1015 lathe has two available feed rates which move the apron 0.002 inch and 0.004 inch per each revolution of the workpiece, these precision adjustments allow for accurate cuts and efficient turning.