10 best benchtop mill lathe combo

Product description

By combining a powerful lathe and drill/mill into one super-efficient and ultra-convenient design, this machine not only frees up valuable shop space, but also offers you significant cost savings over the long term. In fact, once you get this combination lathe up and running, you'll wonder how you and your employees ever got along without it. Use this machine for all your metalworking needs including turning, drilling holes and milling. Durable, heavy-duty construction and quality workmanship give you a solid foundation for all your machining projects. Tight tolerances can be held so you can produce high quality parts for your customers. The large 18.7" x 6.3" table size is generous enough to handle a wide variety of piece sizes to help maximize productivity. The included vise securely clamps down workpieces for less wobble and more precise cuts. For turning, the long 17.3" travel length ensures most projects can be accomplished on this one machine. Provides impressive cost savings by including two machines in one. No need to move projects from one machine to another now you can handle all lathing and drilling tasks on a single machine. Large mill table handles lots of different piece sizes. Can customize the machine to your needs with the many available accessories. Distance Between Centers: 19.68" (500mm). Cross Range Of Automatic Feeding: 0.002"~0.014", '0.05~0.35mm. Drilling & Milling_Spindle Taper: R8. Drilling & Milling_Step Of Speed: 16. Drilling Capacity_Decimal Inch: 0.86", '22mm. End Milling Capacity: 1.10",'28mm. Face Milling Capacity: 3.14", '80mm. Longitudinal Range Of Automatic Feeding: 0.002" ~ 0.014", '0.05~0.35mm. Maximum Cross Travel 7.875" (200mm). Maximum Distance Between Spindle Center & Column 11.22" (285mm). Maximum Distance Between Spindle Nose & Table 12.04" (306mm). Maximum Longitudinal Travel: 17.32" (440mm). Spindle Hole Diameter: 1.10" (28mm). Spindle Taper: MT4/R8. Spindle Travel: 4.33" (110mm).

• Speed adjustment from 120 to 3,000 RPM.
• Swiveling head. Swivel Angle Of Headstock ±180°
• Powerful 3/4 HP motor.
• Two separate motors for lathe and mill/drill operations.
• Swing Over Bed 16.53" (420mm)

User questions & answers

Question:	What is the warranty
Answer:	1 year limited warranty. We have ample spare parts stocked in case of any issues to replace any possible defects.
Question:	Will this cut steel and titanium, and can you program for CNC
Answer:	Yes it will cut steel and aluminum. No, you cannot program for CNC.
Question:	What material are the gears made from
Answer:	Steel
Question:	does it have power feed
Answer:	It uses the lathe feed to move the table. The lathe needs to be running with the lathe chuck in the off position to get the table to move along the feed screw.

Product description

The unit is supplied with a stable base of cast iron. Both vertical column and compound table are of treated, high quality aluminum. All axes are play-free and have adjustable slides. The headstock, made of die-cast aluminum, houses the 24 pole balanced special motor and provides stability even at high operating speeds. This stability facilitates the use of the finest cutters. Six triple slit, hardened MICROMOT steel collets come with the machine and cover shank sizes of 1/32", 1/16", 5/64", 3/32", 7/64" and 1/8" (1.0, 1.5, 2.0, 2.35, 3.0, 3.2mm). The table is fitted with three T-slots of the 15/32" x 15/64" x 13/64" (12 x 6 x 5mm) MICROMOT-norm. An adjustable ruler scale eases the positioning of the work piece. All hand wheels are zero adjustable with 1 revolution = 1/32" (1.0mm), 1 division = .002" (0.05mm). Technical data: Speed 5,000 - 20,000rpm; Table Size 7 7/8" x 2 3/4" (200 x 70mm); X-Y Travel 5 17/64" and 1 13/16" (134 and 46mm); Vertical Travel 2 3/4" (70mm); Footprint Size 5 7/64" x 8 55/64" (130 x 225mm) Height 13 25/64" (340mm); Max. Power 1/8hp (100W); Volts 110 - 120V AC, 60Hz; Weight 15.5 lb (7kg)

Proxxon micro mill MF 70 - This small and beautiful unit is ideal - the accurate mill for lab, optician, jewelry, electronic and model building projects. Mill is made with a cast iron base. The vertical column and compound lathe are treated, high quality aluminum. All axes are play-free and have adjustable slides. The headstock, made of die cast aluminum, houses 24 pole balanced special motor and provides stability even at high operating speeds. This stability facilitates the use of the finest cutters. Comes with 6 triple slit hardened steel collets 1/32-Inch, 1/16-Inch, 5/64-Inch, 3/32-Inch, 7/64-Inch and 1/8-Inch (1.0, 1.5, 2.0, 2.35, 3.0 and 3.2mm) table has three T-slots and an adjustable ruler scale which eases the positioning of work-piece. All hand wheels are zero adjustable with one revolution equals 3/64-Inch (1.0mm) 1 division equals .002-Inch (0.05mm).

From the Manufacturer

Proxxon micro mill MF 70 - This small and beautiful unit is ideal - the accurate mill for lab, optician, jewelry, electronic and model building projects. Mill is made with a cast iron base. The vertical column and compound lathe are treated, high quality aluminum.

• Quiet, precise and vibration-free for fatigue free use
• Low weight and slim design, without ever compromising performance
• High quality precision tools

User questions & answers

Question:	Is it programmable
Answer:	I really don't remember if the clamps came with it or not. It did come with the complete set of collets and wrenches. I have 2 sets of clamps so maybe one set came with it, I know I had to buy the little milling vise, and a drill chuck. Everything for this machine is pretty expensive but first quality. I have a bigger milling machine now, and I will be selling my MF70, but only because it was too small for the bigger steam engines I am building.
Question:	Does the MF70 ship from Amazon with clamps to hold the work to the table
Answer:	Mine says "Made in EU"
Question:	Is this a Chinese made machine? Another website says it is from Luxembourg
Answer:	I don't think it would --the chuck will not let you get a big enough milling bit into it
Question:	Would this machine be adequate for milling AR-15 lower receivers
Answer:	5pcs/Set M3 M4 M5 M6 M8 HSS counterbore for socket head cap screws all 5 different sizes and came in separate plastic tubes used mine on aluminum worked fine

Product features

Proxxon 37110 Micro Mill MF 70

The Proxxon micro mill MF 70 does intricate and detailed tasks with ease. From lab work to tasks for opticians, jewelry and model building projects, this tool is a boon! This precision mill is easy to work with as it can be placed in a tabletop. Adjustable, portable and simple to operate, this mill makes all detailed projects hassle-free.

Stable and Adjustable

You will be able to position the mill according to the task with ease as it is engineered to provide stability at high operating speeds. Combine the ultimate utility and precision with the Proxxon 37110 Micro Mill MF 70.

Product description

Parameters:



Maximum workpiece turning diameter of the machine: 125mm



Maximum length of the piece: 180 mm



Maximum workpiece turning diameter on the tool holder: 60mm



Spindle through the hole diameter: 9mm



Spindle cone: MT.1



Number of treated metric threads: 8



Metric thread processing range: 0.4-1.5mm



Number of treated wires: 8



Inch thread range processing: 0.0028-0.0055 1 / n "



Longitudinal feed level: 2



Longitudinal feed for spindle mandrel: 0.07-0.14 mm



Tailstock travel: 18mm



Tailstock cone: MT.1



Spindle speed range: 560-2500 rpm Level 5



Maximum drilling diameter: 6 mm



Distance from the end face of the spindle to the work surface: 120-180 millimeters



Distance from central spindle to column area: 125 mm



Drilling and milling head rotation angle: 360 °



Spindle speed range: 500-2500 rpm 10 levels



Drilling and milling vertical lifting head stroke: 60 mm



Working surface width: 60mm



T-slot work bench width: 8mm



Working surface length: 85mm



Spindle sleeve movement quantity: 40mm

• Maximum workpiece turning diameter of the machine: 125mm
• Maximum length of the piece: 180 mm
• Maximum workpiece turning diameter on the tool holder: 60mm
• Spindle through the hole diameter: 9mm
• Spindle cone: MT.1

Product description

High Power Metal Mini Lathe DIY Micro Milling Machine Mill 12000rpm 60W with Adapter



Feature:

Motor case and headstock are jointed, maximum motor power is 144W by using more powerful motor

Milling cutter, with two edges, is dangerous, so people should be guided by experts when using it

Main parts: headstock, long machine bed, short machine bed, big slider, small slider, motor blade, connection piece, gear etc. all of the parts are made of metal



Parameter:

Motor speed: 12,000rpm/min(optional choice 20,000rpm/min)

Input voltage/current/power: 12VDC/5A/60W

Axis Y and Z travel: 32mm; Axis X travel: 145mm

Collets: 1-6mm

Maximum working material size clamped by machine vice: 50mm

With 0.02mm scale line, the hand wheel increases the precision when processing

Working material: lignin plastic, soft metal (gold, silver, copper, aluminum etc.), acrylic, plastic etc.

Motor power: 144W

Note: the power of the motor can reach 144W, but for the sake of safety, the output power of the power adapter equipped is 60W. If you want to use 144W of power, please purchase the adapter by yourself, thanks!



Include:

1 x Mini Milling Machine

1 x Power Line



Fast shipping with DHL/FEDEX/UPS/EMS or other express shipping service!

• Suitable for DIY use, teaching use; not suitable for large-scale production and commercial use, mainly for model manufacturing
• Motor case and headstock are jointed, maximum motor power is 144W by using more powerful motor
• Milling cutter, with two edges, is dangerous, so people should be guided by experts when using it
• Main parts: headstock, long machine bed, short machine bed, big slider, small slider, motor blade, connection piece, gear etc. all of the parts are made of metal
• Good product, low price, fast delivery, after-sales protection!

User questions & answers

Question:	What is the maximum height of material to be machined
Answer:	Max 100mm. pls know it is suitable for home DIY use or teaching, not suitable for mass production or commercial use, thanks.
Question:	How much is the total weight of the machine
Answer:	The weight of TZ20008M is 9.5kg.
Question:	what is the largest length this lathe can handle
Answer:	Max diameter is 110mm, Max length is 280mm.
Question:	is the motor 60 watt or 144 watt? what power is the adapter
Answer:	The power of the motor can reach 144W, but for the sake of safety, the output power of the power adapter equipped is 60W. If you want to use 144W of power, please purchase the adapter by yourself, thanks!

Product description

Application:

Youth Activity Center, School General Technical Room, Science and Technology Activity Room Equipment, Science and Technology Museum Student Science and Technology Creation.

Main parts of the machine:

The main components of the main shaft box, intermediate block, connecting block, tailstock, large slider, small slider, hand wheel, support and so on are made of metal. The quality of the product is improved, more durable and more precise.

Parameter:

※Input voltage: AC100V~240V 50/60HZ

※Output voltage : DC12V 2A

※Motor rated power: 24W

※ Motor speed: High speed motor 20000r/min ± 15%

※ Low speed motor: 10000r/min ± 15%

※ Spindle speed: high speed motor 3000r/min±15%

※ Low speed motor: 1600r/min ± 15%

※ Spindle jump: <0.1mm

※ Large slider stroke: 45mm

※Small slider stroke: 35mm

※Center height: 25mm

※Center distance: 110mm

※Maximum processing diameter: 13mm positive claw, 45mm reverse claw

※Three-jaw chuck clamping diameter: 13mm claw, 45mm reverse claw

※Handle scale: 0.1mm/division

※Packing size: 230mm*200mm*315mm

※Weight: 2.2KG

※Connection method: M12 * 1 screw hole

※Minimum clamping size: 1.5mm * 1.5mm

※Maximum clamping size: 18mm * 18mm

※Processing ability: It can process soft metals such as copper and aluminum.



Package include：

1x A set of min lathe

• ★This is a mini desktop lathe which can used for turning, drilling, boring, threading and other processing
• ★Made of advanced aluminum alloy, durable and non-deformable for usage.
• ★Processing Materials: Wood, Plastic, Aluminum, Copper and other Soft Metal.
• ★Three-jaw chuck clamping diameter: 13mm claw, 45mm reverse claw.
• ★Processing ability: It can process soft metals such as copper and aluminum.

User questions & answers

Question:	Why do you misrepresent this as a metal lathe when its only suitable for wood
Answer:	Our mini metal lathes are not only suitable for wood, but also for Plastic, Aluminum, Copper and other Soft Metal.
Question:	How is it a cnc i don't see it
Answer:	If you have any questions, you can email us for one-on-one help, we are happy to solve it for you.
Question:	Can this lathe handle steel
Answer:	No
Question:	What arbor size tailstock drill chuck works with this machine
Answer:	this was a pos ran onnce and stoped

Product description

The MICRO Mill FF 230 is a small, accurate milling system used to mill, drill and countersink steel, cast iron, aluminum, brass and plastic. The headstock swivels through 360°, indicated on a scale. Height is adjustable. One revolution equals 1/32" (1mm) travel, 1 division equals .002" (0,05mm). The quill and headstock may be locked in position, which is essential when milling. The powerful permanent magnet motor drives via a poly-v-belt, yielding high torques, especially at lower speeds. The machine comes with three collets of 15/64", 5/16" and 25/64" (6, 8 and 10mm). The solid table has a size of 10 5/8" x 3 5/32" (270 x 80mm) and is T-slotted to 15/32" x 15/64" x 13/64" (the MICROMOT norm of 12 x 6 x 5mm). Technical data: Speeds 280 - 550 - 870 - 1,200 - 1,500 - 2,200rpm; Table Size 10 5/8" x 3 5/32" (270 x 80mm), Column Size Ø 1 3/8" x 15 3/4" long (35 x 400mm); X-Y Travel 6 11/16" x 2 9/16" (170mm x 65mm); Overall Height 20" (500mm); Volts 110 - 120V AC, 60Hz; Weight 41 lb. (17kg) Important: For best results when milling, it is recommended to lock the headstock. This is easily done via the FF 230's lock levers.

From the Manufacturer

Proxxon micro mill FF230 is a small, accurate milling system used to mill, drill, and countersink steel, cast iron, aluminum, brass, and plastic. The headstock swivels through 360-Degree indicated on a scale. Height is adjusted via a zero adjustable hand wheel, also used as a fine feed when milling. One revolution equals 1/32-Inch (1mm) travel, 1 division equals .002-Inch (0.05mm). The quill and headstock may be locked in position, which is essential when milling. The powerful permanent magnet motor drives via a poly-v-belt, yielding high torques, especially at lower speeds. The machine comes with three collets of 15/64-Inch, 5/16-Inch and 25/64-Inch (6, 8, and 10mm). The solid table has a size of 10-5/8-Inch by 3-5/32-Inch (270 by 80mm) and is T-slotted to 15/32-Inch by 15/64-Inch by 13/64-Inch.

• Quiet, precise and vibration-free for fatigue free use
• Low weight and slim design, without ever compromising performance
• High quality precision tools
• Model Number: 34108

User questions & answers

Question:	Are there any cnc conversion kits for this? i'm looking to make a circular hole on an aluminum phone case. suggestions
Answer:	No, they are not the same. Galaxy S6 Lite released in 2020 ONLY. If you have purchased the tablet in 2019, then this case will NOT FIT your tablet correctly.
Question:	Con que voltaje trabaja
Answer:	No.
Question:	How does this compare to the micro mill mf 70 from proxxon
Answer:	Please identify the exact model of your tablet first. If it shows SM-P610/P615, then this case will fit your tablet. Otherwise no. You can use the settings menu to locate it. Here's how: Browse to SETTINGS > GENERAL > ABOUT DEVICE Your model number will be listed
Question:	Is the ff 230 suitable for tapping light metals and plastics? it would need a reverse switch, and depth control. what tips do you have for tapping
Answer:	Yes, it works with iPhone 7. It is not suggested to put on any protective phone case. Please find the item size here: https://images-na.ssl-images-amazon.com/images/I/61myErXQ7CL._SL1500_.jpg

• 【STURDY ALUMINIUM CONSTRUCTION】- The mini metal lathe bed is made of high grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection.
• 【INFINITELY VARIABLE SPEEDS】- Variable speed from 50-2500 Rpm. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop buttom included.
• 【ACCURATE 3-JAW CHUCK】- Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004"(0.01mm).
• 【PROFESSIONAL COMPOUND REST】- The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod.
• 【WIDE APPLICATION】- Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling works.

User questions & answers

Question:	Is this a Sieg C3 model mini lathe
Answer:	no problem ! this mine lathe can be used in making wood turned pens !
Question:	How do you remove the chuck
Answer:	fit a 1/4" pen mandrill. That is .014" over 6mm !
Question:	is this powerful enough to cut small titanium parts
Answer:	The chuck can be not removable ! the Chuck can be stuck : 0.6MM-6MM ! the diameter of the drive shaft is 10MM !
Question:	Does it come with any tools? If not, what is recommended
Answer:	sorry ! this machine is diy ! there is not a data port or card slot !

Product features

Heavy & Sturdy Machine

Features a 7 inch swing over bed, 13.78 inch distance between centers and 21mm spindle bore. Includes a thread range of 12-52 TPI, threading dial indicator and standard and metric handwheel graduations.

Infinitely Variable Speeds

Variable speed from 50-2500 Rpm. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The feed speed can be adjusted according to the requirements of different workpieces.

High Accuracy Chuck

3-jaw self-centering chuck has gone tested with accuracy and repeatability to set cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm.

Four-way Tool Post

T-slotted compound slide with four-way tool post, 4 blades avaliable at most, easy to change quickly. Bevel cutting can be made by adjusting the angle of the compound rest with the lever.

Professional Cross Slide

Designed with abrasive resistance, moving blades freely with feed rod. 16 TPI reversible lead screw. The v-slideways with distance between center: 350mm(13.78").

Wide Applications

Suitable for processing jobs, like counter face turning, driling, threading and cutting jobs on materials made up of round bar. All accessories are well packed.

550W 7" X 14" Variable-speed Metal Lathe With Nylon Gears

The 7 x 14 Inch Precision Mini Benchtop Lathe features a 3-jaw chuck, a MT3 spindle taper, a MT2 tailstock taper, a tool rest and a 3/4 HP motor, designed to perform various types of metal turning, simple to operate. Through high frequency quenching process and precision grinding of high-quality cast iron bed. 0-2250Rpm spindle speed sub-level of two tranches spindle gear change speed control, continuously adjustable. A movable lamp is free for you.

Product description

Features:

Machine tool with powerful motor, the motor box and spindle box for conjoined structure. Main parts: such as the spindle box, tailstock, long stand, size slider, motor blade, gear, connecting block are made of metal materials, with belt protection cover. Center height is 75mm and distance between centers is 135mm, motor speed normally drops to 2000rpm when using the lathe to machine metal. Maximum motor power is 60W by using more powerful motor. Turning tool is high - speed steel material, can process soft, non - ferrous, precious metals. By using central block, the diameter can be expanded to 50mm.

Specification:

Condition: 100% brand new

Metal: Metal

Weight: 4990g/176oz

Motor Speed: 12000rpm

Input Voltage/Current/Power: 12V DC/5A/60W

X-Axis travel: 32mm

Z-Axis travel: 145mm

Max Diameter of Machined Material: 100mm

Length of Machined Material: 135mm

Machining Accuracy: 0.07mm



Package Includes:

1 x Mini Lathe

1 x Adapter 

1 x Power Cord

1 x Accessory Package

1 x Machine Bottom Plate

1 x User Manual

• Machine tool with powerful motor, the motor box and spindle box for conjoined structure.
• Main parts: such as the spindle box, tailstock, long stand, size slider, motor blade, gear, connecting block are made of metal materials, with belt protection cover.
• Center height is 75mm and distance between centers is 135mm, motor speed normally drops to 2000rpm when using the lathe to machine metal.
• Maximum motor power is 60W by using more powerful motor.
• Turning tool is high - speed steel material, can process soft, non - ferrous, precious metals. By using central block, the diameter can be expanded to 50mm.

User questions & answers

Question:	is good for metal
Answer:	The existing tool is .164 square by ~ 2" long. It can be reshaped with a grinding wheel. There wasn't a extra tool order form with the unit. There are cutter sets available from Grizzley and Harbor Freight Tools, but I have not ordered yet
Question:	Where can you buy the parts for the converted over to cnc thanks in advance
Answer:	It has a pass through hole but only 6mm
Question:	can this lathe process titanium, brass, tungsten, damascus steel etc
Answer:	8X8mm
Question:	does it come with any metal cutting tools
Answer:	120v

Product description

8x16 Inch Metal Processing Variable Speed Lathe Metal Lathe

This precision 8" x 16" Variable-Speed Lathe is designed to perform various types of metal, jade and wood turning. It is perfect for a sturdy workbench or as a stand-alone unit when mounted on a suitable stand. It can be used in areas such as mini precision parts processing, sample processing and modeling works. It is both perfect for hobbyists and modelers who is looking to add finite detail to their construction project. It features variable-speed spindle with high and low speed ranges and convenient quick-lock tailstock.

Specifications

Swing Over Bed: 8-1/4" (210 mm)

Cross Slide 4-5/8" (117 mm)

Distance Between Centers: 15-3/4" (400 mm)

Motor Power: 750W

Spindle Speed Ranges: Low 50-1250, high 100-2500 RPM

Travel: compound rest 2-1/8" (54 mm), cross slide 3" (76 mm)

Tailstock: Taper MT#2

Tail Sleeve: φ1" (25 mm)

Hole Thru Spindle: φ0.83" (21 mm)

Inch Threads: 8-44 TPI

Metric Threads: 0.5-3.0 mm

Spindle Accuracy: 0.0004-0.0012" (0.01-0.03 mm)

Feature

Telescopic sets with scale

All metal gears, shell and hand wheel

High precision, able to turn out standard qualified works

Wear-resistant, durable, accurate and professional

Automatic tool, infinitely variable, professional tool post

Equipped with all-metal gears, this machine is wear-resistant, durable, more accurate rotation and professional.

Package Content

1 X 8" x 16" Variable-Speed Lathe

1 X Tool Storage Box

1 X 4" 3-Jaw Chuck

1 X 4" 4-Jaw chuck

1 X Oil Can

1 X Set of Accessories

1 X User Manual

• Motor Power: 750W; Spindle speed can be adjusted from 50 to 2500 RPM (50-1250 low, 100-2500 high)
• Distance Between Centers: 15-3/4" (400 mm); Travel: compound rest 2-1/8" (54 mm), cross slide 3" (76 mm); Tailstock: Taper MT#2
• 8x16 Inch metal lathe equipped with all-metal gears, this machine is wear-resistant, durable, more accurate rotation and professional
• Telescopic sets with scale, you can intuitively see the length of the telescopic handle scale, precise scaling can be digitally standardized or adjusted by lateral movement
• This precision 8" x 16" Variable-Speed Lathe is both perfect for hobbyists and modelers who is looking to add finite detail to their construction project. It features variable-speed spindle with high and low speed ranges and convenient quick-lock tailstock.

User questions & answers

Question:	Where can parts be purchase for this lathe
Answer:	amazon type in "mini lathe accessory " use google " little machine shop"
Question:	Will this cut left hand threads
Answer:	No junk
Question:	where do you get replacement belts for this lathe, I had a different lathe years ago, and could never get belts for it
Answer:	Junk junk!! Go to grizzly
Question:	I have the same lathe made by best equip. One of my belts is about to break. Do you know where I can purchase a replacement belt
Answer:	Grizzly

• 【STURDY IRON CONSTRUCTION】- The mini metal lathe bed is made of high-grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection.
• 【INFINITELY VARIABLE SPEED】- Variable speed from 0-2250 RPM. Forward and reverse at all speeds. Operate either manually or with the adjustable auto feed rate. The hardness and accuracy of the slideways are obtained by raw material, heat hardening and grinding. The emergency stop button included.
• 【ACCURATE 3-JAW CHUCK】- 3-jaw self-centering chuck for setting materials steadily. Backsplash guard included. The spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm.
• 【PROFESSIONAL COMPOUND REST】- The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest. The professional slide is designed with abrasive resistance, moving blades freely with a feed rod.
• 【WIDE APPLICATION】- Driven by the quality motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing, and modeling works.

User questions & answers

Question:	Is 57 lbs. Shipping weight correct
Answer:	No. It weighs 90 to 100 lbs
Question:	Does this unit comes with all accessories
Answer:	no, you must buy them separately, but as far as the different size gears for speed are included and the tool heads are included also.
Question:	gears are for metal
Answer:	I did not purchase this lathe, I opted to purchase a Grizzly G4003G Which will handle any job I could want to machine.
Question:	what's the country of origin
Answer:	China

Product features

Heavy & Sturdy Machine

Features with sturdy material, this heavy-duty metal lathe is designed for durability and longevity.

Infinitely Variable Speeds

Variable speed: 50-2250 RPM. You can operate it manually. The feed speed can be adjusted according to the requirements of different workpieces.

High Accuracy Chuck

3-jaw self-centering chuck has gone tested with accuracy and repeatability to set materials steadily. The spindle is supported by precision tapered roller bearings.

Four-way Tool Post

T-slotted compound slide with 4-way tool post, easy to change quickly. Bevel cutting can be made by adjusting the angle of the compound rest with the lever.

Professional Cross Slide

Designed with abrasive resistance, moving blades freely with feed rod. The slideways with a distance between center: 300mm(12").

Wide Applications

Suitable for processing jobs, like drilling, milling, threading and cutting jobs on kinds of materials. All accessories are well packed.

7'' x 12'' Metal Lathe Machine

The Precision Mini Benchtop Lathe features a 3-jaw chuck, a spindle taper, a tailstock taper, a tool rest and a quality motor, designed to perform various types of metal turning, simple to operate through high-frequency quenching process and precision grinding of high-quality cast iron bed.