11 best jointer

Product description

PORTER-CABLE® PC160JT variable speed 6" jointer features a variable speed range of 6, 000 to 11, 000 RPM and Cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife Cutter head, with Jackscrew knife leveling arrangement and built-in Cutter head Lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.

• Variable 6, 000 to 11, 000 RPM speed range allows the user to select the right speed for the size and hardness of material being cut
• Two knife cutter head with jack screw knife leveling arrangement for easy replacement and adjustment of knives
• Built-in cutter head lock facilitates knife replacement and adjustment
• Extra large table provides ample work support and Surfacing stock up to a full 6" wide
• Center mounted fence gives needed support throughout the cut for accurate edge jointing

User questions & answers

Question:	Can this jointer be attached to a 2 1/2 vac
Answer:	yes with a reducing adapter on your 2 1/2 vac
Question:	What is the recommended maximum board length that should be used with this jointer
Answer:	Maximum board length will depend on the strength of the operator and if/how well the jointer is anchored. I would think 8’ would be doable by most. Comes down to how well you can hold the workpiece down flat on roughly 16” of table before the blade.
Question:	What is the difference betwee the pc160jt and the pc160jtr
Answer:	Hello Kimberly, there is no difference. The actual model number is PC160JT. The JTR is a typo on Amazon. Porter Cable does not make a PC160JTR. Best Wishes!Tomboysupply.com
Question:	What material are the fence and table made out of
Answer:	I am 99% certan that the tables are cast aluminum, and the fence is aluminum. The weight, color and feel make this pretty evident. If it were cast iron it would weigh twice as much and be prone to rust. This jointer is as good functionally as any other. But because of its light weight it must be secured to a stable heavy base. It also needs a bit more tuning than other models. But if you are going to own any precision tools that is something you should become capable of.

Product features

Great for Woodworking

Making wood surfaces perfectly flat, these jointers are extremely versatile. From beginners to woodwork hobbyists, owning a good quality jointer is something that is crucial for your DIY projects around home. Do even more than just the general woodwork with a good quality jointer at your workshop.

Flatten and Square the Face of the Board

As a jointer allows you to make one straight surface and one flat surface, you will be able to shape and size wood according to accurate measurements. With DIY fences, table legs, chairs, frames and much more, you will be able to decorate your home with original masterpieces made by you.

Be in Complete Control

You will not have the hassle of losing control over this power tool as you will be able to adjust the speed range. You will be able to select the right speed fir the hardness and size of the material that you are using to cut. The extra-long table and center mounted fence also provides ample work support for an accurate cut.

Your Best Buddy for Cabinet Resizing

If you are enthusiastic about redoing your kitchen, you will adore a jointer. A handy tool for fitting doors and cabinets, you will be able to show off your creativity with a good piece of art. As a jointer’s versatility depends on the user, you will be able to get better at the handling with every use of this tool.

Product description

10 Amp Benchtop jointer features a variable speed range of 6, 000 to 11, 000 RPM and Cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife Cutter head, with Jackscrew knife leveling arrangement and built-in cutter head lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.

• 10 amp benchtop Jointer features a variable speed range of 6, 000 to 11, 000 RPM and cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife cutter head, with jackscrew knife leveling arrangement and built-in cutter head lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.
• Variable speed: range of 6, 000 to 11, 000 RPM allows the user to select the right speed for the size and hardness of material
• Easy replacement and knife adjustments: two-knife cutter head with jackscrew knife leveling arrangement allows for easy replacement and adjustment of knives
• Accurate cutting: center-mounted fence gives needed support throughout the cut for accurate edge jointing
• Hard and soft surfaces: heavy duty 10 amp motor provides power for hard and soft woods

User questions & answers

Question:	What are the dimensions of the Jointer itself, not the package dimensions
Answer:	The saw can easily cut the full width of a 12" board when making a 90 degree straight or bevel cut. Angle cuts will reduce the maximum span of the cut.
Question:	How long is it from end to end of the in- and out-feed tables
Answer:	No.but I am surprised at the quality for the price.
Question:	how much does it weigh
Answer:	Maximum speed (rpm) 5000 RPM Arbor size 5/8 in. According to the tech specs in the description
Question:	how wide is the cut
Answer:	In theory it should be able to cut boards up to 12" wide, however the quality was so poor, it was literally falling apart out of the box and I never powered it up and returned it out of safety concerns.

Product features

Great for Woodworking

Making wood surfaces perfectly flat, the CRAFTSMAN CMEW020 10 Amp Benchtop Jointer is extremely versatile. From beginners to woodwork hobbyists, owning a good quality jointer is something that is crucial for your DIY projects around home. Do even more than just the general woodwork with this jointer at your workshop.

Flatten and Square the Face of the Board

The CRAFTSMAN CMEW020 10 Amp Benchtop Jointer holds a heavy duty 10 amp motor provides power for hard and soft woods. With DIY fences, table legs, chairs, frames and much more, you will be able to decorate your home with original masterpieces made by you.

Be in Complete Control

You will not have the hassle of losing control over this power tool as you will be able to adjust the speed range. Ideal for edging, flattening, or face jointing the CRAFTSMAN CMEW020 10 Amp Benchtop Jointer is also portable.

Product description

This is a lot of jointer in a small-package. It features a spiral-style cutterhead with indexable carbide inserts, knob-adjustable infeed table with lock for ultra-precision cutting depth adjustments, an in. and metric cut depth indicator and an east-to-adjust extruded-aluminum fence. You won't find a more feature-packed 6 in. benchtop jointer anywhere else.

• Motor: 1-1/2 HP, 120V, Single-Phase, 10A
• Maximum with of cut: 6 in.
• Maximum depth of cut: 1/8 in.
• Cutterhead type: spiral-style with 12 inserts
• Cutterhead speed: 12,000 RPM
• Table size: 6-1/4 x 30
• Dust port size: 2-1/2 in.

Product description

Dual Rack and Pinion fence ensure blade and fence are always parallel, integral one-piece fence is adjustable and tilts 0-90 degrees, flush cuts can be made at 0 degrees without removing fence, 45 degree locating notch in fence allows indexing off the outside surface of a mitered joint, non-marring, heavy-duty aluminum shoe, retractable, anti-slip pins, preset depth stops for all common biscuit sizes. Specs: 7/8" Arbor, No load speed 10, 000RPM, depth of cut (mm) 20mm, biscuits Accepted 0, 10, 20, weighs 6.6lbs. Includes: carbide blade, dust bag, vacuum adapter, Torx key, wrench, soft kit bag.

The DEWALT DW682K Plate Joiner Kit allows you to cut slots for holding biscuits with precision. This kit includes an easy-to-adjust fence, a heavy-duty nonmarring shoe, and preset stops for all common biscuit sizes, so you can craft solid joints quickly and accurately.

Integrated, Adjustable Fence for Accuracy

Accuracy is critical when creating joints and The DEWALT Plate Joiner Kit delivers. Its dual rack-and-pinion fence is designed to ensure the blade and fence are always parallel--the toughest part of creating a perfect joint. This one-piece fence is integrated into the joiner's overall design for convenience, plus it's adjustable, and can be tilted at angles ranging from 0 to 90 degrees.

The plate joiner's configuration allows you to make flush cuts without removing the fence. A 45-degree locating notch in the fence allows for easy indexing of an outside registration.

Dependable Motor for Quick, Precise Cuts

The DW682K's 6-1/2 amp, 10,000 rpm motor provides plenty of power for making cuts at depth of up to 20 millimeters--even in the hardest woods. The power behind the cut is an integral part of what makes this tool safer, as it prevents unexpected movements with your workpiece.

Convenient Design Details Including Preset Stops

Equipped with a non-marring, heavy-duty aluminum shoe, the DW682K can be clamped down for stable, stationary work. And whether you're using the joiner clamped down or as a free-moving unit, the retractable, antislip pins help hold your workpiece in place for the perfect cut. And it weighs just 6.6 pounds for easy handling.

For easy setup, the DW682K features preset depth stops for all common biscuit sizes of 0, 10, and 20.

The DW682K Plate Joiner Kit comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DW682K Plate Joiner, carbide blade, dust bag, vacuum adapter, Torx key, wrench, and soft kit bag.

• 6.5 Amp, 10,000 rpm motor provides power for working in the hardest woods
• Dual rack and pinion fence ensure blade and fence are always parallel for accurate joints every time
• Integral one-piece fence is adjustable and tilts 0-90 degrees
• Flush cuts can be made at 0 degrees without removing fence
• 45 degree locating notch in fence allows indexing off the outside surface of a mitered joint; non-marring, heavy-duty aluminum shoe allows joiner to be clamped for stationary work

User questions & answers

Question:	What is the blade thickness
Answer:	Blade is Carbide and 1/4" thick as far as thickness of cut . Will make slots for #0, #10 and #20 Biscuits by setting depth stop correctly.Great tool and very well built!
Question:	is the handle on the motor or the fence
Answer:	The fence is on the front of the joiner. The handle is on top above the cutter. The motor is behind the cutters.
Question:	I would like to know if it works in Europe 220 volt 50 Hz
Answer:	you would either need to buy a step-down (220v->110v) transformer or buy a tool specifically marketed for 220v areas.
Question:	My husband is making a table and mentioned he needed a joiner. Us this what he probably meant? I am clueless
Answer:	If he is making a table he could have meant either a joiner, which is this hand tool, or a jointer, which is a stand alone machine.A joiner makes cuts into the edge of a board. You place a small piece of wood called a biscuit with some glue into this slot and into the matching slot in another board edge and glue the two boards together. The biscuit helps hold the joint together.If he meant a jointer, this machine is used to make the edge and usually one side of a board straight and flat. You can use other machines for the other edge and side once you have a straight a flat edge and side to reference them against.This joiner is a lot cheaper than a jointer. Anyone who does much woodworking needs or already has a jointer. You can see what one looks like by searching on Amazon and you can see if he has one in his shop. They look a lot alike. Such as http://www.amazon.com/Powermatic-Deluxe-6-Inch-Jointer-Quick-Set/dp/B000BHNC0C/ref=sr_1_6?ie=UTF8&qid=1355322797&sr=8-6&keywords=jointer for a stand alone floor model or http://www.amazon.com/Jet-JJP-10BTOS-10-Inch-Bench-Top-Jointer/dp/B001O0D6OC/ref=sr_1_3?ie=UTF8&qid=1355322797&sr=8-3&keywords=jointer for a 'bench top' model.A joiner is useful, but there are several ways to work around not having one. Nice prezzie, though.I'll probably buy this joiner myself.

Product features

DEWALT DW682K 6.5 Amp Plate Joiner

The DW682K Plate Joiner Kit has a powerful motor for working with hard woods. Features a dual rack and pinion fence ensuring blade and fence parallelism for accurate joints every time. Integral one-piece fence is adjustable and tilts 0-90°.

Product description

6" Benchtop Jointer #20-600H has a 6 row helical-style cutter head with 12 HSS, 2-edge insert cutters for super cutting action, flat surfacing results and easy knife changes. Features rigid, all-metal construction, machined aluminum tables, a quick depth setting mechanism with scale, adjustable fence that tilts from 90° to 45° quickly and accurately, spring-loaded safety guard, 2-1/2" dust port, front safety on/off switch and two push blocks.

• RIKON BENCHTOP JOINTER - This 6” becnhtop jointer has a 6 row helical-style cutter head with 12 HSS, 2-insert cutters for super cutting action.
• HIGH SPEED - With a powerful 10 AMP motor, this benchtop jointer also features a high speed steel insert knives and a large 30” x6-3/16” table.
• ALL STEEL CONSTRUCTION - Made from rigid, all-metal construction, machined aluminum tables, a quick depth setting mechanism with scale, adjustable fence that tilts from 90 degrees to 45 degrees quickly and accurately.
• SEE RESULTS - This benchtop jointer also has a spring loaded safety guard and a front on/off switch. You will see results when using this benchtop jointer.

Product description

Precise, Durable, Adjustable Power Tool for Every Woodworker

Experience smooth, cutting precision that makes prep work even more convenient with Wahuda Tools Jointers. Flatten edges and create two perfectly square surfaces with ease using a stable and powerful benchtop jointer that comes in 6, 8, and 10-inch size options, all of which are designed to be easily maneuvered around your shop or job site. Wahuda Jointers comes equipped with a cast iron table for maximum stability during operation while ensuring a more scratch-free working surface. Adjusting your work area is uniquely simple, too, thanks to pre-installed set screws that make leveling hassle-free.

Built To Smooth All Types of Wood Surfaces

Unlike the traditional straight knives, our new Spiral Style Cutterhead enhances cutting-edge sharpness while reducing the need for blade maintenance. With four sides of carbide insert tips, get smoother cuts and smaller shavings from blades that stay sharp for longer. They’re also incredibly easy to replace. Simply loosen the insert, rotate to the next edge, and tighten the insert back into place. The spiral design also cuts quieter while minimizing disruption from nicks and tear-outs.

Designed For Beginners To Expert Woodworkers

Whether you are a budget-minded novice or an experienced woodworker, Wahuda Jointers are created to help you perfectly prepare your stock for the next step. With ample machining power to handle various woodworking tasks, such as squaring, tapering, and trimming, you can complete your projects with ease and efficiency. Make Wahuda Tools your woodworking partner and craft your next masterpiece.

• No More Cupped Woods. Create perfectly flat surfaces and edges quickly and hassle-free with the Wahuda Jointers. Experience smoother and accurate cuts even on tough or figured woods w/ Wahuda Tools.
• Cutting-Edge Sharpness. Our spiral cutterhead has 4-sided carbide inserts for sharper and quieter cutting precision. The standard blade size also allows for a cost-effective and simple replacement.
• Capable Steady Performance. Wahuda Jointers are powered with a 120V motor with a fixed 12,000 RPM. They are fully capable of handling edging, jointing, flattening, or tapering no matter the surface!
• Solid Built For Your Convenience. Our adjustable and expandable cast iron tables enhance stability even when working on longer, larger pieces, with a fence that tilts from 90 &135​° for ​versatility.
• Perfect For Job Sites Or Small Shops. Depending on your needs or your shop’s size, Wahuda Tools have 6, 8, and 10-inch wood jointers that will do the job right. They’re conveniently movable, too!

User questions & answers

Question:	are the blades (carbide tips square to the table or are they angled so they shear the wood rather than cut in a cupping action
Answer:	There are 12 included bits inside the screwdriver cartridge that you can swap between. You can also fit any bit of your choosing into the 1/4 in chuck. Thanks for the question!
Question:	Wahuda website says the 6” jointer is 30.5” overall length. Amazon says it is 34”, and a question here says 33 7/8”. Which is it
Answer:	No, on a couple of levels: This device is powered by an internal rechargeable battery. On the bottom of the grip, there is a micro-sub port, similar to what you would see on your average Android cell phone or many blue-tooth headsets. You charge the screwdriver through this sub port. The voltage for us ports is 5 volts. The product ships with a ac-to-usb adapter. That adapter only accepts 110-120volts You can buy international travel power adapters that will accept 220volts and provide usb charging
Question:	Where is it manufactured
Answer:	Not sure, but this one sucked
Question:	Why is this jointer $50 cheaper on their website? It’s $549 with free shipping to the lower
Answer:	Just snug it up with the impact and be sure to use the lowest setting, then use the torque wrench to complete the tightening process.

Product description

Remember when you had a perfectly square jointer to flatten out your boards and workpieces? Maximize precision with the WEN 6-Inch Benchtop Jointer. Our spiral cutterhead utilizes 12 staggered HSS blades to provide a perfect finish to hard and soft woods alike, while the powerful 10-amp motor rotates the cutterhead up to 12,000 times per minute. Adjust the infeed table to remove 0 to 1/8-inch of material with each pass, with a reliable depth-of-cut scale for maximum accuracy. The spacious table measures in at 30 by 6 inches. Bevel the fence up to 45 degrees to create angled cuts along the faces of your boards. The spring-loaded blade guard helps protect against accidental injury, only exposing a limited section of the cutterhead during jointing operation. This package also includes two push blocks for safer jointing and an onboard dust port for minimal cleanup. Compatible with the WEN BP510H Replacement Spiral Blades. And, because it's a WEN product, the WEN 6-Inch Benchtop Jointer comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.

• Spiral cutterhead system utilizes 12 staggered HSS blades for an ultra fine finish
• Features a spacious 30-by-6-inch table
• Remove 0 to 1/8 of an inch of material with each pass
• Adjustable 19-3/4 by 4-1/4-inch fence bevels up to 45 degrees
• Includes an onboard depth-of-cut scale, two push blocks, 2-1/2 dust port, and a two-year warranty

User questions & answers

Question:	I realize the table is only 30” long but after developing some experience using this jointer, how long could a board be that you flatten
Answer:	Hope this helps... A jointer or in some configurations, a jointer-planer is a woodworking machine used to produce a flat surface along a board's length. As a jointer, the machine operates on the narrow edge of boards, preparing them for use as butt joints or gluing into panels. A planer-jointer setup has the width that enables smoothing ' and leveling the faces of boards small enough to fit the tables.
Question:	can the HSS cutters be replaced with carbide cutters
Answer:	The scale is on the top right corner
Question:	What is the base made of
Answer:	Yes, this has a 7/16" x 20 internally threaded drawbar end for Bridgeport type milling machines.
Question:	Is this jt630h have a case iron base
Answer:	The head on this fly cutter is 2 1/2 inches. There is not a factory spec on this holder. I would expect it to be around 2 3/4 inches.

Product description

A step up from our G0814 6" Jointer with cabinet stand with built-in mobile base, the G0814X comes equipped with a 4-row V-helical cutterhead for unmatched finish and long-lasting cutter edge durability. The V-helical cutterhead features 24 indexable carbide inserts that can each be rotated up to 3 times to expose a new sharp edge. No more replacing or sharpening blades every time they get dull or nicked. You'll get quieter operation, and most importantly, a significantly better finish with less tear-out using this cutterhead vs. a straight-knife model. SPECIFICATIONS: Motor: 1 HP, 110V/220V (prewired 110V), single-phase, 14A/7A Maximum width of cut: 6" Maximum depth of cut: 1/8" Maximum rabbeting depth: 1/2" Cutterhead diameter: 2-1/2" Cutterhead type: 4-row V-helical Insert size & type: 15mm x 15mm x 2.5mm, indexable carbide Cutterhead speed: 5000 RPM Table size: 6-5/8" x 47-3/8" Fence size: 29-1/8" x 4" Minimum stock length: 8" Minimum stock width: 3/4" Minimum stock thickness: 1/2" Dust port size: 4" Footprint: 13-1/2" x 18" Overall dimensions: 47-1/2" W x 20" D x 42" H Approx. shipping weight: 260 lbs. FEATURES: 4-row V-helical cutterhead with 26 indexable carbide inserts Cabinet stand with built-in mobile base Precision-ground cast-iron tables with dovetailed ways Heavy-duty center-mounted fence with stops at 45°, 90° & 135° V-belt drive

Product description

This 8" Parallelogram jointer features extra-long infeed and outfeed tables that can be adjusted transversely and longitudinally to each other for ultra-precision face flattening and edge jointing. Table levers with positive Table locks provide Quick and precise height adjustments, and the pedestal-mounted power switch is conveniently located for easy on and easy off. This version features a straight knife cutterhead. Specifications: Motor: 3 HP, 230V, single-phase. Total table size: 9" X 76". Fence size: 4-5/8" X 38". Maximum depth of cut: 1/8". Rabbeting capacity: 1/2". Cutterhead speed: 5500 rpm. Cutterhead diameter: 3-1/16”. cuts per minute: 22, 000. Cutterhead knives: 4. Lever-adjusted Table height with depth gauge. Center-mounted fence with rack and Pinion adjustment. Built-in Mobile base. Precision-ground cast-iron tables. Extra-long 40" Infeed Table. Powder-coated finish. 4" Dust port with built-in dust chute. Parallelogram Table design. Power transfer: poly v-belt. Switch: magnetic push-button switch with large off paddle for safety. Fence system: Positive stops at +/- 45 degrees and 90 degrees. Approximate shipping weight: 470 lbs

• Motor: 3 HP, 230V, single-phase
• Total table size: 9" X 76"
• Fence size: 4-5/8" X 38"
• Maximum depth of cut: 1/8"
• Rabbeting capacity: 1/2"

User questions & answers

Question:	Is it made in the USA
Answer:	Thanks for checking out our hoodies! Our size charts show measurements, if you want to check them in detail, but if your son normally wears a men's small in hoodies, he should be fine with the small here too :) -Charles @ RS

Product features

Shop Fox W1859 8" Jointer

This 8" Parallelogram Jointers feature extra-long infeed and outfeed tables that can be adjusted transversely and longitudinally to each other for ultra-precision face flattening and edge jointing. Table levers with positive table locks provide quick and precise height adjustments, and the pedestal-mounted magnetic switch is conveniently located for easy on and easy off. This version features four straight knives.

Surface Planing, Edge Jointing, Bevel Cutting, or Rabbeting

The W1859 is capable of a surface planing, edge jointing, bevel cutting, and rabbeting with its fully adjustable 4-5/8"-by-38" cast-iron fence. Flatten the face of your work piece to prepare it for surface planing on a thickness planer, square rough or warped stock for joinery and finishing, cut a specific angle into your work piece, or remove a section of the work piece edge. All become easy tasks with the Shop Fox W1859 8" Jointer.

4-Knife Cutterhead, Built-In Mobile Base, Free Safety Push Blocks

W1859 is equipped with four straight, high-speed steel knives, which allows for a better finish than traditional three-knife jointers. Purchase the optional W1211A to set your knives perfectly every time.

Additionally, W1859 comes with a handy built-in mobile base for ease of movement.

Safety First

For your own safety, read the instruction manual before operating W1859. The free safety blocks included with your purchase may vary from what is pictured.

Product description

The W1857 8" Jointer with Mobile base is a feature packed machine with so much to offer including a thermal protection switch, built-in Mobile base, heavy duty cast iron hand wheels, and Taiwanese build quality. Also, you'll get 25% more cuts per minute than with a four-knife cutterhead, which leaves a smoother finish and requires less sanding than the typical three knife models. Step up to this larger capacity 8" Jointer and be confident that you Made a great decision! Csa Certified meeting CSA C22. 2 #71. 2-10 and UL 987 8th Edition standards!

• Motor: 3HP, 230V, Single Phase
• Total table size: 8" X 72"
• Fence size: 4-5/8" X 38"
• Max depth of cut: 1/8"
• Features built-in mobile base
• Helical Cutterhead contains 36 Carbide inserts
• Insert Size: 15 x 15 2. 5mm

Product features

Shop Fox W1858 8" Jointer with Helical Cutterhead

The W1858 8" Jointer with Helical Cutterhead and Built-In Mobile base is a feature-packed machine with so much to offer including a pedestal-mounted magnetic switch, built-in mobile base, and heavy duty cast-iron hand wheels. Also, you'll get 22,000 cuts per minute with the helical cutterhead, which leaves a smoother finish and requires less sanding than the typical straight-knife options. Step up to this larger capacity 8" Jointer and be confident that you made a great decision!

Surface Planing, Edge Jointing, Bevel Cutting, or Rabbeting

The W1858 is capable of a surface planing, edge jointing, bevel cutting, and rabbeting with its fully adjustable 4-5/8"-by-38" cast-iron fence. Flatten the face of your work piece to prepare it for surface planing on a thickness planer, square rough or warped stock for joinery and finishing, cut a specific angle into your work piece, or remove a section of the work piece edge. All become easy tasks with the Shop Fox W1858 8" Jointer.

36 Cutterhead Inserts, Built-In Mobile Base, Free Safety Push Blocks

W1858 is equipped with 36 indexable carbide inserts, which allow for a better finish than traditional straight-knife jointers.

Additionally, W1858 comes in with a handy built-in mobile base for ease of movement.

Safety First

For your own safety, read the instruction manual before operating W1858. The free safety blocks included with your purchase may vary from what is pictured.

Product description

The new Jet 6 in. Benchtop jointer provides a smooth and consistent cut surface thanks to its use of 14 carbide tipped helical head blades. Heavy duty cast iron tables and fully adjustable fence make for a premium cutting experience. Features include a fully adjustable cast iron fence, internal dust collection system and safety black and push stick. Powerful 1 HP 15 Amp motor turns the cutter head at 10000 RPM Highly visible scale for accurate depth of cut adjustments Front mounted toggle switch with removable safety key 6 in. jointing capacity in small footprint Large dust collection bag with quick empty zipper Includes: JJ-6HHBT 6 in. Benchtop Jointer - 718600.

• True helical cut with 14 indexable four-sided carbide blades
• Heavy duty cast iron tables
• Large cast iron fence
• Fully adjustable fence with locking stops at +/- 45-Degree tilt dual-direction for beveling
• Internal blower motor moves dust and chips away from motor and cutter head