8 best jet 6 jointers
The Jet 6 Jointer is a power tool used in woodworking to create flat and smooth surfaces on the edges of boards. Here is some information about the Jet 6 Jointer:
Size and Capacity: The "6" in Jet 6 Jointer typically refers to the size of the cutter head, which is 6 inches wide. This is a common size for home workshops and smaller woodworking projects.
Cutting Mechanism: A jointer like the Jet 6 uses a rotating cutter head with multiple sharp blades to remove material from the edge of a board.It can be adjusted to control the depth and angle of the cut.
Infeed and Outfeed Tables: Jet 6 Jointers come with infeed and outfeed tables. The infeed table supports the board as it enters the cutter head, and the outfeed table supports it as it exits. These tables can be adjusted to achieve precise cuts and maintain a level surface.
Fence: The jointer also has a fence that can be adjusted to control the angle at which material is cut. This helps in creating straight and square edges on boards.
Dust Collection: Many Jet 6 Jointers come equipped with dust collection ports to help keep the work area clean by capturing wood chips and dust as you work.
Motor Power: The motor power of a Jet 6 Jointer can vary, but it is typically in the range of 1 to 2 horsepower. The motor provides the necessary power to drive the cutter head and make smooth cuts.
Usage: Jointers are commonly used in woodworking projects that require boards with straight and smooth edges, such as creating furniture, cabinets, and other fine woodworking projects.
Safety: Like all power tools, it's important to follow safety guidelines when using a Jet 6 Jointer. This includes wearing appropriate safety gear, keeping hands and clothing away from moving parts, and using push blocks or sticks to guide the material through the machine.
Maintenance: Regular maintenance is essential to keep a Jet 6 Jointer in good working condition. This includes keeping the blades sharp, lubricating moving parts, and ensuring that all adjustments are tight and secure.
Price Range: The price of a Jet 6 Jointer can vary depending on the features and specifications. Typically, it falls in the mid-range to higher-end category of woodworking tools.
The Jet 6 Jointer is a valuable tool for woodworkers, allowing them to create precise and smooth edges on boards, which is essential for many woodworking projects. However, it's important to have the necessary skills and knowledge to operate it safely and effectively.
Below you can find our editor's choice of the best jet 6 jointers on the marketProduct description
The new Jet 6 in. Benchtop jointer provides a smooth and consistent cut surface thanks to its use of 14 carbide tipped helical head blades. Heavy duty cast iron tables and fully adjustable fence make for a premium cutting experience. Features include a fully adjustable cast iron fence, internal dust collection system and safety black and push stick. Powerful 1 HP 15 Amp motor turns the cutter head at 10000 RPM Highly visible scale for accurate depth of cut adjustments Front mounted toggle switch with removable safety key 6 in. jointing capacity in small footprint Large dust collection bag with quick empty zipper Includes: JJ-6HHBT 6 in. Benchtop Jointer - 718600.
- True helical cut with 14 indexable four-sided carbide blades
- Heavy duty cast iron tables
- Large cast iron fence
- Fully adjustable fence with locking stops at +/- 45-Degree tilt dual-direction for beveling
- Internal blower motor moves dust and chips away from motor and cutter head
Product description
JET JJ-6CSDX 6" Long Bed Jointer (708457DXK)
Ideal for home shop use, the JET 708457DXK JJ-6CSDX 6-Inch 1 HP Jointer with Quick-Set Knive System squares your wood without fail. Offering one of the longest working surfaces in its class, and featuring an exclusive auto-set quick change knife system that lets you quickly replace or change all three blades, this powerful jointer helps you build doors, tabletops, and other furniture pieces with ease.
All-Enclosed Steel Base Cabinet for StabilityThe JJ-6CSDX comes with an all-steel enclosed base cabinet. An integral tab at each end of the cabinet bottom makes it easy to secure the jointer to the floor whenever a suitable surface is available. This cabinet also provides a stable platform and puts the table surface at a comfortable 31-1/4 inches above the floor.
Fan-Cooled Motor for Consistent Performance
The base cabinet also houses the 1 HP, 1 phase 115/230-volt TEFC (totally enclosed fan cooled) motor (pre-wired 115-volt) and wiring to help isolate those components from the dust-prone jointer environment. A large door on the rear of the base cabinet provides easy access to the motor, which spins the JJ-6CSDX cutterheads at a very consistent 6000 RPM for a desirable balance between speedy material removal and a silky-smooth surface on the wood.
Long Cast-Iron Table for Better Accuracy
The JET JJ-6CSDX features a long, cast-iron table with a smooth, flat precision-machined finish that keeps the wood sliding predictably while ensuring accuracy. Measuring 55-3/4 x 7-3/8 inches, this table makes straightening large project pieces accurate and reliable. Additionally, the overall cut capacity of 6-1/16 x 1/2 inches (WxD) can keep up with even the most active of home wood shops. Finally, the outfeed tables have built-in 1/2-inch rabbeting ledges that add a little more versatility to the jointer.
Handwheels for Easy Adjustments; Automatic Limiter for Safety
Both the infeed and outfeed tables feature Jet's exclusive front-mounted handwheels to make table height adjustments easy and accurate. And for safety and protection, an automatic limiter on the infeed table prevents the operator from accidentally taking overly aggressive cuts deeper than 1/8 inch. For added convenience, the depth limiter can be manually overridden easily but requires the operator to intentionally release it.
Steel Cutterhead with Three Knives for Long Life
The JJ-6CSDX uses a precision-machined steel cutterhead fitted with three high-quality knives measuring 6 1/6 x 3/4 x 5/64 inches (WxLxD). These knives have two cutting edges that effectively double their life, and they are aligned using Jet's exclusive auto quick-set system. A pair of cams at each knife actually adjusts the knife height. Once set, the cams are locked in position and the knives can be reversed or replaced without having to reset the height, eliminating the need for a knife-setting gauge.
Additionally, precision-machined pockets in the knives let you slip them onto the cams, thus retaining the setting. The openings in the knives are also wide enough that individual knives can be offset to compensate for a nick, further extending the life of each knife edge.
User-Friendly Features for Easy, Pleasant Operation
Designed to be an easy-to-operate, helpful addition to your shop, the JJ-6CSDX features a two-way tilting fence with positive stops at 45 and 90 degrees to handle bevel operations, as well as industrial push-button controls conveniently placed for easy access. Finally, a built-in dust chute with four-inch port connects to your collection system for efficient dust and chip disposal.
The JJ-6CSDX measures 22 x 37.5 x 56 inches (WxHxD), weighs 237 pounds, and is backed by a five-year warranty.
About JET: A History of Sharing New, Feature-Rich Products
Opened in 1958 after the founder of the company, Leslie P. Sussman, took the first Boeing Jet Airplane trip from Seattle, Washington to Japan, JET began as a small dealer that sold air hoists and trolleys out of a single hardware store in Seattle. Over the years, JET has carried everything from snowmobiles, transmitter radios, and forklifts to nylon stockings, but by the early 1970s, metalworking had become the base of their business line. And by the 1980s, JET had expanded into the realm of woodworking. Today, you'll find that JET offers a wide range of popular woodworking tools that are backed with best-in-class features and excellent service.
What's in the Box
One stand with motor, one stand cover with mounting hardware, one dust chute with mounting hardware, one bed assembly, one fence assembly, one cutterhead guard, one belt guard, one V-belt, four 1/4-20 x 1/2 pan head screws, four 1/4 flat washers, one lock handle, flat washer and lock nut for the fence, one fence handle, three lock bolts, three 3/8-inch lock washers, two handwheel assemblies, one can of touch-up paint, manual, warranty card, and two push blocks.
From the Manufacturer
The New JET JJ-6CSDX 6-Inch Long Bed Jointer has the same features as the regular 708457K but with this Long Bed version you now have a bed length of 56-Inch for a better control and more accuracy. For longer material the longer the bed length the better. You still have the 3 high-speed steel knives in the cutter head and these are the new Quick-Set style so changing the knives is very easy and fast. The power is delivered by the 1horsepower motor, 115/230-Volt pre-wired at 115-Volt. The fence is 33-1/8-Inch long and you also have the two way action, stops at 45 and 90-Degree. Exclusive front mounted table adjustment hand wheels for quick, easy and accurate control. Heavy dusty one-piece steel closed stand with a built in 4-Inch dust port for efficient dust and chip disposal. Great new machine with longer bed and quick-set knives for more accurate jointer operation.
- COMFORT: Fully-adjustable infeed and outfeed tables let you set the height to your requirements.
- VERSATILITY: Built-in rabbeting ledge.
- CONVENIENCE: Center-positioned fence controls and front-mounted table adjustment handwheels.
- STABILITY: Heavy-duty, one-piece steel closed stand with mounting tabs.
- ACCURACY: Extra-long cast iron table has a precision-machined finish.
User questions & answers
Question: | What is the individual weight of the two boxes this is shipped in |
Answer: | Thank you for your question! It is completely sealed and ready to be given as a gift! |
Question: | Anyone else have a problem with a defective fence sitting with a left/right tilt |
Answer: | No idea what is going on. I paid around $30 a couple of years ago and it says forester and its the best hand saw I have ever used. I would buy a Forester pole saw if they made one, I bought a Silky pole saw and the blade on this Forester is every bit as impressive as the Silky. |
Question: | Can I get this wired for 230 V 1 Ph when shipped |
Answer: | Yes, the sell them at forestershop.com and the price is way less than the Zubat. They claim that the steel is just as good as well, but I can't confirm that. I have a Zubat and it looks exactly the same, so the Koreans are copying them to the "t." |
Question: | What is the widest you can joint with this jointer |
Answer: | I doubt it. Scabbard is actually pretty nice, but no leg strap mount part. Comes with good belt loop part though. Excellent bang for the buck saw. |
Product description
Are you ready for a jointer that gets the wood flat and straight every time? The JET 708457K JJ-6CSX 6-Inch 1 HP Jointer, 115/230-Volt 1 Phase offers a precision-machined, extra-long cast-iron table to ensure accuracy you can trust. An ideal choice for your shop, this high-performance machine includes an exclusive auto-set quick change knife system to save you time and help increase productivity.
Industrial-Style Hand Wheels for Smooth AdjustmentsThe JJ-6CSX boasts a unique design that allows you to adjust both of the feed tables simply by rotating industrial-style hand wheels that turn smoothly and easily. This feature allows for easier tapers and enhances user control when taking precise, fine measurements as low as 1/64 of an inch.
Smooth Gliding Fence Offers Multiple Stops
Additionally, the fence glides smoothly throughout its complete range of motion and tilts both ways with the traditional stops at 45 and 90 degrees to handle bevel operations. This also allows you to quickly reproduce multiple cuts at any angle.
Steel Knife Cutter Head for Speed; Cast-Iron Table for Accuracy
One of the most innovative aspects of the JJ-6CSX's design is the triple-bladed, high-speed steel knife cutter head, which delivers rapid cutting and a superior finish for high-quality results. The blades are part of an exclusive auto-set quick-change knife system, which allows you to replace or change all three blades in a fraction of the time other machines take.
The jointer also features a cast-iron table with a precision-machined finish, so you can count on the accuracy of each pass.
Powerful 1 HP Motor and Rabbeting Ledge for Versatility
Equipped with a powerful 1 HP motor, the JJ-6CSX easily handles a wide range of jobs. A built-in rabbeting ledge also lends versatility, while a heavy-duty, one-piece steel closed stand includes mounting tabs for increased stability, so you can easily handle different wood types and sizes.
User-Friendly Controls and Features
Designed to be extremely user-friendly, the JJ-6CSX features industrial push-button controls conveniently placed throughout for easy access. In addition, the center fence controls are conveniently mounted to allow quick adjustments, and a built-in dust chute with four-inch port quickly connects to your collection system for efficient dust and chip disposal.
The JJ-6CSX weighs 215 pounds and comes with a five-year warranty.
About JET: A History of Sharing New, Feature-Rich Products
Opened in 1958 after the founder of the company, Leslie P. Sussman, took the first Boeing Jet Airplane trip from Seattle, Washington to Japan, JET began as a small dealer that sold air hoists and trolleys out of a single hardware store in Seattle. Over the years, JET has carried everything from snowmobiles, transmitter radios, and forklifts to nylon stockings, but by the early 1970s, metalworking had become the base of their business line. And by the 1980s, JET had expanded into the realm of woodworking. Today, you'll find that JET offers a wide range of popular woodworking tools that are backed with best-in-class features and excellent service.
What's in the Box
One stand with motor, one stand cover with mounting hardware, one dust chute with mounting hardware, one 12/14-millimeter open end wrench, one 8/10-millimeter open end wrench, one 3-millimeter hex wrench, one bed assembly, one fence assembly, one cutterhead guard, one belt guard, one V-belt, four 1/4-20 x 1/2 pan head screws, four 1/4 flat washers, one lock handle, flat washer, and lock nut for the fence, one fence handle, three lock bolts, 3-3/8-inch lock washers, two handwheel assembly, one can of touch-up paint, manual, warranty card, and two push blocks.
From the Manufacturer
This 6-inch woodworking jointer from Jet features a three-knife cutterhead that allows rapid cutting and a superior finish. The 46-inch cast-iron bed has a precision-machined finish ensuring accuracy, and a two-way tilting fence with 45- and 90-degree positive stops with conveniently mounted center fence controls that allow for quick adjustment. Other features include easy-to-use hand wheels that fully adjust the infeed and outfeed table height, a built-in rabbeting ledge, 6-1/16-by-1/2-inch cutting capacity, and 1/2-inch rabbeting capacity. Your jointer purchase includes front and rear safety knife guards, three high speed steel knives, 4-inch dust chute, industrial motor controls, one-piece welded stand, and jack screw cutterhead.
FEATURES
- Powerful 1 HP totally enclosed fan cooled (TEFC) motor
- Spring loaded front guard and fixed rear guard for maximum protection
- Dust chute with 4" dust port for efficient dust/chip collection
- Exclusive front mounted table adjustment dials for convenient and superb accuracy
- Industrial push button controls
- Heavy duty one piece steel stand with mounting tabs for extra stability
- Large cast iron tables with a precision machined finish will ensure accuracy
- Three-knife cutterhead allows rapid cutting while producing a superior finish
- Two-way tilting fence with positive stops at 45 degrees and 90 degrees
- Dovetailed table ways allow adjustment for continued accuracy
- Conveniently mounted center fence controls allow quick adjustment
- Infeed and outfeed table height is fully adjustable
- A rabbeting ledge is built into the tables
- Easy-to-use front hand wheels for table adjustment
STANDARD EQUIPMENT
- Front and rear safety knife guards
- Three high-speed steel knives
- 4" dust chute
- Industrial motor and controls
- Two-way tilting fence
- One-piece welded stand
- Jack screw cutterhead
SPECIFICATIONS
Cutting Capacity (WxD/in): 6-1/16 x 1/2
Cutterhead Speed (RPM): 4,800
Number of Knives: 3
Rabbeting Capacity (in): 1/2
Table Surface (WxL/in): 7-3/8 x 46 x 31-3/4
Fence (HxL/in): 4 x 29-1/8
Blade Size (LxWxT/in): 6-1/16 x 5/8 x 1/8
Fence Tilts Right & Left: 45 degrees - 45 degrees
Positive Stops: 45 degrees R, 90 degrees , 45 degrees
Motor (TEFC): 1 HP, 1 Ph 115/230V Prewired 115V
Net Weight (lbs): 258
- 6 inch woodworking jointer; fence tilts 2 ways, features 90 and 45 degree stops
- 1 horsepower, single phase, 115/230 volt motor; 46 inch bed
- Cast iron bed
- Includes jointer, front and read safety guards, three steel knives, dust chute, stand, jack screw cutter head
- 7 to 3/8 by 46 by 31 to 3/4 table surface; 258 pounds; 1 year warranty
User questions & answers
Question: | is the helical cutter head compatable with this model |
Answer: | 1 sets blades with 3pcs. |
Question: | I have an older jj-6csx. i bought it at an estate sale. i'm getting a lot of chatter on the edges of harder woods. is the rpm adjustible |
Answer: | I just purchased but did not measure, they fit my Wen 13” perfectly, and are doing a great job. |
Question: | Can someone who owns this jointer, please give me the measurement of the stand? I need to know if it will fit into a 21" x 13" mobile base. Thank you |
Answer: | The instruction manual for the 12-inch planer was included at time of original purchase. The part number for the manual is 1344547, was printed in 1998. It's doubtful the manual is available. Sorry I can't be more helpful. |
Question: | What country is the joiner made in |
Answer: | If they are of the same thickness and with |
Product description
6-1/8-Inch Jointer Blades Fits Delta 37-190, 37-658, 37-205, 37-195 & Rockwell 37-280 37-275X Delta 37-658
Fits JET JJ-6, JJ-6OS, JJ-6CS & JJ-6CSX, replaces 708801 70845K, Powermatic 54A
Fits Craftsman 113-206932 & 113-206891
Made of High Speed Steel for longer cutting life
Set of 3, Plastic case packaging
- 6-1/8-Inch Jointer Knives Fits Delta 37-190, 37-658, 37-205, 37-195,37-280 & Rockwell 37-280 37-275X Delta 37-658
- Fits JET JJ-6, JJ-6OS, JJ-6CS & JJ-6CSX, replaces 708801 70845K, Powermatic 54A
- Fits Ridgid JP0610, Craftsman 113-206932 & 113-206891
- Blade dimension: 6-1/8-Inch x 11/16-Inch x 1/8-Inch
- Set of 3, Plastic case packaging
User questions & answers
Question: | Will these fit a Craftsman model |
Answer: | Thanks for your question. Olmsted Forge products are manufactured in Taiwan. |
Product description
POWERTEC High Speed Steel (HSS) Knives are made of premium High Speed Steel (HSS) with performance that meets or exceeds OEM product. The manufacturing process started with premium HSS material, followed by strictly professional machining and quality control that ensure extreme sharpness, precision, balancing, and tight tolerance in every piece of "POWERTEC HSS Knife" product. The final Heat Treatment enhances the hardness and durability. "POWERTEC High Speed Steel (HSS) Knives" stay sharp and last longer than conventional product. We guarantee that "POWERTEC High Speed Steel (HSS) Knives" meet or exceed OEM quality and industrial standard.
- Replacement blades for JET Jointer 70845K, JJ-6CS
- Made of High Speed Steel for longer cutting life
- Single edge
- A set of three; plastic case packaging
- Blade dimension: 6-Inch x 5/8-Inch x 3/32-Inch
User questions & answers
Question: | Gentlemen I have a Jet JJ-6cs, older model. The blades in the manual are OEM part # 708801. Do you think these will work for me |
Answer: | Jake - Although this fence is very adaptable, it may not fit your Grizzly 17" band saw. It was designed for a 14" saw and therefore may not give you a full range of use (to the end of the table.) |
Question: | I have a a 6 inch jet jointer model jj-6csx 3/4 horse power what knives can I use |
Answer: | Will not fit Sears Craftsman 12" bandsaw model 113.247310 |
Question: | Will these knives fit a jet jj-6csdx, 6 inch deluxe jointer with qs knives |
Answer: | Yes it is threaded. Like a shoulder bolt. Had to modify mine where spring goes by fileing. Not exact fit . |
Question: | Will this work with jsl 6j jointer |
Answer: | This item is currently on back order so it may take a little longer for it to ship. |
Product description
JET JJ6-K 6" Jointer Knife Set (708801)
The Jet JJ6-K 6-Inch Jointer Knife Set allows rapid cutting while producing a superior finish. These jointer knives are constructed of high-speed steel. The set includes three knives.
From the Manufacturer
Accessory for JJ-6CSXW. Three-knife cutterhead allows rapid cutting while producing a superior finish.
- HIGH-SPEED STEEL: Longer cutting life between sharpenings.
- DURABILITY: Knives are hardened and tempered to 62-64 Rockwell.
- PRECISION BALANCING: Ensures quality cuts every time.
- MULTIPACK: Includes three 6" knives.
Product description
Product description:
Blade Material: HSS (High Speed Steel)
Blade Size:6-1/8-Inch x 11/16-Inch x 1/8-Inch.
Package Includes: A Set of 3 Planer Blades.
Compatible with the following Model:
Craftsman 922995, 21705, 113-206932, 113-206891, 113-20680, 113-206931, 113-232200.
Also Fits for Delta 37-190, 37-195, 37-205, 37-275x, 37-280, 37-658.
Also Fits for RIDGID JP06000, JP0610, JP06101.
Also Replace knives For JET JJ-6, JJ-6OS, JJ-6CS & JJ-6CSX, 70845K, JJ-6CS.
Tip:
Please take a look through our shop and view our other woodworking products and accessories.
We will be glad to combine shipping with our other items.
We appreciate you viewing our listing!
- 6-1/8-Inch Jointer Blades Fits for Craftsman 922995, 21705, 113-206932, 113-206891, 113-20680, 113-206931, 113-232200.
- Also Fits for Delta 37-190, 37-195, 37-205, 37-275x, 37-280, 37-658.
- Also Fits for RIDGID JP06000, JP0610, JP06101.
- Also Replace knives For JET JJ-6, JJ-6OS, JJ-6CS & JJ-6CSX, 70845K, JJ-6CS.
- Blade Size:6-1/8-Inch x 11/16-Inch x 1/8-Inch. A Set of 3.
Product description
'Replacement Blade, High Speed Steel, Features Quick Set Installation, 90 days Warranty, Overall Height (In.) 3/4, Overall Width (In.) 5/64, Overall Length (In.) 6-1/6, Tool Weight (Lb.) 0.7, Includes Blades'
- Price For: Each Item: Replacement Blade Overall Height (In.): 3/4 Includes: Blades Features: 1 1/2" IPS, Slip Union Connectorson both Inlet and Discharge Ports Overall Length (In.): 6-1/6 Overall Width (In.): 2.17 Construction: High Speed Steel Corded/Banded: Corded Tool Weight (Lb.): 7.2 Corded/Cordless: Corded Country of Origin (subject to change): Taiwan, Province of China
User questions & answers
Question: | Do these have the holes drilled in them for the screws? i have the jet jj6-csdx jointer |
Answer: | Depending on your brand of bandsaw, you may need to drill and tap two mounting holes. You might get by with just drilling holes in the edge of the bandsaw table and using nuts and bolts with lockwashers. You will need to provide tools and any nuts, bolts & washers. |
Latest Reviews
View all
Pool Chemicals
- Updated: 01.07.2023
- Read reviews

The Learning Company Pc Games
- Updated: 25.04.2023
- Read reviews

Hair For Damaged Hairs
- Updated: 02.02.2023
- Read reviews

Honda Pressure Washer
- Updated: 25.03.2023
- Read reviews

Brightest Aa Flashlights
- Updated: 16.03.2023
- Read reviews