11 best snap on impact guns

Product description

Snap-On 18V 1/2" Drive RED MonsterLithium Impact Wrench Kit, Part #CT8850, KIT: 2 BATTERIES, IMPACT, BAG, CHARGER AND MANUAL

• Snap-On CT8850

User questions & answers

Question:	How many ft pds of torgue
Answer:	No experience, sorry. I am out to repel mosquitos and noseeums. Horse flies scare me so they get swatted if near me. Maybe check www.waltonoutdoors.com etc. for repellent ideas for your area?

Product description

The set of Impact are new, out of the Box, it come in the Snap On Tool Bag

• SNAP ON CT8850K2 18 V MonsterLithium 1/2" Drive Cordless Impact Wrench

User questions & answers

Question:	I see it's 600 ft lbs in reverse, what about torque in forward
Answer:	Dear Value Customer, This compact monster wrench should provide from 600-700 ft-lb of torque constantly. Hope this helps.
Question:	How much ft/lbs of torque does this have
Answer:	600 ft, we dont have green please see picture is red
Question:	Why so expensive
Answer:	Not At All !!
Question:	I have to remove a cylinder head and the bolts on it are torqued down to 300 ft lbs. Can this impact driver really do
Answer:	Most GMOs are of big cash crops like corn, soy, sugar beets, etc. Hard to believe this would be a GMO product.

Product description

The 2767-20 M18 FUEL High Torque 1/2 inch Impact Wrench with Friction Ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000 ft-lbs of fastening torque and 1400 ft-lbs of nut-busting torque. With 2X faster removal speed, users will be able to get the job done faster and be more productive throughout their day. By providing the industry’s most compact cordless High Torque Impact Wrench at 8.39 inches length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL with Bolt Removal mode gives users the most control over their fasteners. Bolt Removal mode gives the user more control when removing fasteners by slowing to 750rpm once the fastener has been busted loose. This tool offers quick, tool-free socket changes with a 1/2 inch friction ring anvil. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.

• Provides maximum productivity by removing stubborn and high torque fasteners up to 2X faster than the competition
• Most compact cordless High Torque Impact Wrench in its class at 8.39" in length
• Industry leading 4-mode drive control with bolt removal mode, allowing for ultimate control.
• REDLINK PLUS intelligence prevents damage to the tool and battery due to overloading or overheating
• REDLITHIUM batteries deliver more work per charge and more work over the life of the battery
• Features a friction ring design to ensure quick and easy socket changes
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• LED light to illuminate the work area

User questions & answers

Question:	If i purchase this through amazon, is the milwaukee 5 year warranty still honored? i read that amazon is not an authorized milwaukee retailer
Answer:	Milwaukee’s 5 year warranty is from the purchase date (from a valid retailer) or from the date code on the tool if you don’t have a proof of purchase from a valid/approved retailer. I’ve had warranty repairs under both circumstances.
Question:	What is max torque
Answer:	On a full battery it has 1,000 ft lbs of forward torque and 1,400 ft lbs of reverse torque. Thanks Jim
Question:	Is this truly at 2767- 22? Gen 2 1400 ft lbs? because the description does not match what it should be if that is the part number
Answer:	It is. the 2767-22 is just a combo kit that comes with two batterys and a charger. it is the beast.
Question:	The description says it has 1000 ft lbs of torgue. The spec page says 750 in lbs. Which is it
Answer:	1000 lbs-ft fastening. 1400 lbs-ft breaking. and slows to 750rpm when nut is loose.

Product features

Milwaukee 2767-20 M18 Fuel High Torque

The 2767 M18 Fuel 1/2" High Torque Impact Wrench with Friction Ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000 ft-lbs of fastening torque and 1400 ft-lbs of nut-busting torque. With 2X faster removal speed, users will be able to get the job done faster and be more productive throughout their day.

4-Mode Drive Control with Bolt Removal mode gives users the most control over their fasteners. Bolt Removal mode gives the user more control when removing fasteners by slowing to 750rpm once the fastener has been busted loose.

This tool offers quick, tool-free socket changes with a 1/2 in. friction ring anvil. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.

Product description

Snap-On CT8850G (Green) 18V Li-Ion 1/2" Dr. Impact Wrench Kit with 2-Batteries, Charger and Carry Bag

• Snap-On CT8850G (Green) 18V Li-Ion 1/2" Dr. Impact Wrench
• with 2-Batteries, Charger and Carry Bag

Product description

18 V 1/2" Drive MonsterLithium Brushless Impact with 2-5.0 Ah Battery and a double charger 900 ft-lb of torque output easily breaks stubborn fasteners loose Digital microprocessor-controlled switch maximizes performance, run time and durability Three torque settings in forward and three in reverse help the tool adapt to various applications Built-in brake stops the anvil and prevents the tool from throwing fasteners and sockets Super bright LED illuminates the work area Includes 5 Ah battery for longevity Includes tool and battery double charger

• Comes With 2 Batteries

Product description

The DEWALT DCF899HB 20v MAX XR Brushless High Torque 1/2" Impact Wrench w. Hog Ring Anvil features a brushless motor which is designed to provide superior run-time, performance and durability. It has a heavy-duty impact mechanism with a max torque at 700 ft./lbs. for best-in-class torque with the most demanding applications, with a max breakaway torque at 1,00 ft./lbs. This tool features a 3-speed selector switch that allows for application specific torque/drive control. It also has a LED work light with a 20 second delay that will provide visibility when working in dimly lit spaces. Even though this tool is ergonomic and lightweight, it can handle a 6-8ft drop and is resistant to chemicals, grease & cleaners. The hog ring offers quicker/easier socket changes for users who swap sizes frequently and don't require maximum retention. This is a barstool item, battery and charger sold separately.

• Brushless Motor for superior performance; Tool length 8.81 inch
• Power tool type cordless; Heavy duty impact mechanism with max torque 700 feet/ pound, breakaway torque 1,200 feet /pounds
• 3 speed selector switch for control
• LED work light; No load speed : 400/ 1200/ 1900 rpm
• Able to handle a 6ft drop
• Battery & charger sold separately

User questions & answers

Question:	using 1 of the 3 speeds ,is there anyway to set the torque to 100 ft-lbs
Answer:	The manual states that the maximum torque values for each speed are 100/300/700. So if you set it to Speed 1 then the maximum torque it will deliver is 100 ft-lbs.
Question:	Dofference between dcf899m1 and dcf899b
Answer:	Dewalt codes are as follows B = bare tool. No battery. C = Compact (1.5Ah) battery. D = 2Ah compact battery. L = 3Ah battery. M = 4Ah battery. P = 5Ah battery. T = 6Ah Flexvolt battery. X = 9Ah Flexvolt battery. DCF899 = Detent pin version. DCF899H = Hog ring version. So, DCF899M1 is detent pin with 1 4Ah battery. If you see something like DCF899HP2, that means hog ring version with 2 5Ah battery. Otherwise, whether it's DCF899B or DCF899M1 or DCF899P1, the tool itself is EXACTLY the same.
Question:	Is this a kit, or just the lone drill
Answer:	DCF899B is the DCF899 impact with a detent anvil sold as a (B) bare tool. DCF899HB is the DCF899H impact with a (H) hog ring anvil* sold as a (B) bare tool. DCF899M1 is the DCF899 impact with detent anvil sold as a kit with charger, one (1) 4Ah battery, and a bag. DCF899P1 is the DCF899 impact with detent anvil sold as a kit with charger, one (1) 5Ah battery, and a bag. DCF899P2 is the DCF899 impact with detent anvil sold as a kit with charger, two (2) 5Ah batteries, and a bag. DCF899HP2 is the DCF899H impact with hog ring anvil* sold as a kit with charger, two (2) 5Ah batteries, and a bag *Difference between detent and hog ring: Detent holds socket more securely but must be put on so pin lines up with hole in impact socket & will need a small screwdriver or the like to release. Hog ring allows one to put on and pull off impact sockets by hand, though usually pretty difficult at first until broken in. Of course you should only use impact sockets/extensions If you put a hand socket (usually chrome) on a hog ring it will lock on and you will need a tool to get it off because the indentations are different. That's also a good way to break the hog ring, but if that happens they are cheap and easy to replace. Detents are usually more suited for situations where socket changes are infrequent like in a factory setting & hog rings for where frequent changes are needed like automotive work.
Question:	My boyfriend mentioned briefly he wanted a dewalt gun that apparently is so strong that he can change tires within minutes with it. could this be it
Answer:	Yes. This could be it. This is currently Dewalts newest and strongest cordless impact wrench. You might want to look for the one that comes with batteries and a charger if he doesn't have that already. Be mindful that this model comes with two variations: hog ring and detent anvil. Detent anvil holds the socket tighter but uses a tool (which is probably included)to change the sockets while hog ring holds the socket on with a split washer but doesn't require a tool. Great tool though with either option.

Product features

DEWALT DCF899HB 20V MAX XR Brushless High Torque 1/2" Impact Wrench

The DCF899HB 20V MAX XR Brushless High Torque 1/2" Impact Wrench w. Hog Ring Anvil is powerful and versatile for fastening various applications. Designed for comfort, speed control, and working in dark spaces.

Features:

• This cordless impact wrench will effortlessly loosen any lug nut, bolt or large screw with 300 ft-lb (400 N.m) of torque, and give you 260 ft-lb (350 N.m) to tighten them. Along with the tool itself, you will get one 20volt battery, a belt clip, fast charger, and a carrying case.
• Work quicker, longer and with fewer stops thanks to the rechargeable 20V 4.0 Ah lithium-ion battery - fully charged in only 2 hours with the NoCry fast charger (both compatible with NoCry 20V power tools only).
• The 2700 max IPM rate creates heavy duty impacts for easy fastening and loosening of nuts and bolts - just as effective as a bulky and expensive pneumatic air powered electric gun.
• The 1/2in detent anvil will remove tires from cars, commercial vehicles, motorcycles, trucks, and trailers in a flash at 2200 rpms - and can be used for automotive repairs, major construction projects, heavy equipment maintenance, or product assembly.
• IMPORTANT: There is an ongoing issue with the forward/reverse selector switch that prevents a small percentage of our impact wrenches from working properly. We have managed to reduce the rate of these faulty units considerably, but not yet completely. We feel very bad about it and are actively working on solutions. If you receive a defective product, immediately contact us and we will send you a replacement unit for free. No return required.

Product features

NoCry 20V Cordless Impact Wrench Kit

Is this impact wrench worth it?

Considering you are getting an impact wrench with torque and speeds rates on par with more well-known impact wrench makers, superior build quality, and 200 dollars worth of additional kit, it'd be a struggle to find a better deal out there.

How long does the battery take to charge?

With a 2 Ah per hour output rate, the included fast charger will charge your 4.0 Ah battery from flat to full in 2 hours. Fully charged, the battery will last 65 minutes of continuous use at max rpm with no load. And to make life even easier, the built-in LED charge indicators let you know when to recharge.

Why use an electric handheld wrench over an air-powered one?

This battery powered impact wrench can comfortably be taken anywhere from a home garage to a professional chop shop, yet has more than enough torque to handle lugnuts on cars, motorcycles, trailers, trucks, and tractors or heavy machinery - saving you time, money and effort.

What’s included in the package?

One rechargeable 20V 4.0 Ah lithium-ion battery and 20V fast charger (both compatible with all NoCry 20V power tools), a belt clip to hang your wrench, and a carrying case.

Should you need to buy an extra battery, fast charger or a different tool, search on Amazon, amazon.com/nocry, or check out our entire range of kits using the handy comparison table below.

Product description

This Ingersoll Rand air impact wrench was introduced over 25 years ago and has been continuously refined. Offers the sheer power and performance features to tackle the toughest jobs with ease - as well as proven durability and economy. CFM at Load: 22, Drive (in.): 1/2, Forward Torque (ft.-lbs.): 350, Working Torque (ft.-lb.): 25-350, Impacts Per Minute (IPM): 1,200, Max. Reverse Torque (ft.-lbs.): 600, Max. Torque (ft.-lbs.): 600, Hammer Mechanism: Twin, Reversible: Yes, Inlet Size (in.): 1/4, Standard Bolt Capacity (in.): 9/16, Speed - No Load (RPM): 8,000, Tool Weight (lbs.): 5.8, Average Air Consumption (CFM): 4.2, Noise Level (dB): 99, Min. Hose Size (in.): 3/8, Tool Length (in.): 7 5/16, Variable Speed: Yes

• Classic, reliable design offers proven power, performance, and durability
• Twin-hammer mechanism delivers a maximum torque of 600 foot-pounds
• Adjustable power regulator provides easy control of torque output
• Ergonomic 2-piece design is easy to operate and maintain
• Arrives fully lubricated and ready for use out of the box
• Exclusive impact mechanism
• Pressure-feed lubrication

User questions & answers

Question:	Wher do you oil this tool? I do not see a place to do this
Answer:	Impacts need lubrication in two spots. The inlet and the hammer mechanism. Ready your owners manual for the procedure. Some have and oil plug and some are taken down and greased by hand.
Question:	Where is this unit manufactured
Answer:	Ingersoll Rand is an American company out of Wisconsin
Question:	What impact extension set and impact socket set do you have, and would you recommend it
Answer:	I got the 1/2" Tekton sockets and extensions and they've worked very well for me. Just be sure to check out the sizing of the sockets. One of the metric sets has bigger sockets but not sequentially getting larger (they skip some sizes). I got the 11mm-23mm I think. Has all the sockets in there. Recommend the gun? Absolutely.
Question:	Trigger gets stuck on mine. I release trigger and it keeps going. Gun is only a yr old. Any ideas
Answer:	Sounds like the spring is hanging up inside. Not sure if you registered with IR or not but I would think that's covered. Haven't had that problem with any other Ingersoll impacts though.

Product features

Ingersoll Rand 231C Super-Duty Air Impact Wrench, 1/2 Inch

Power through tough jobs with ease using the Ingersoll Rand 231C 1/2-Inch Super-Duty Air Impact Wrench. First introduced over 25 years ago and refined ever since, this impact wrench offers proven performance and reliability at an excellent value. The exclusive twin-hammer impact mechanism delivers a maximum torque of 600 foot-pounds, while the adjustable power regulator lets you easily adjust power output to suit your task. Lightweight and easy to maintain, this impact wrench is a reliable choice for vehicle hobbyists and professional mechanics alike.

What's in the Box:

Twin-Hammer Mechanism for Efficient Performance

Delivering a maximum torque of 600 foot-pounds, the 231C Air Impact Wrench offers enough power to install and remove stubborn bolts, lug nuts, and other hardy fasteners. The twin-hammer mechanism helps ensure efficient performance with impressive rotational speeds of up to 8,000 rpm.

Ergonomic Design for Sustained Work

Measuring 7.3 inches in length and weighing 5.8 pounds, the 231C Air Impact Wrench is compact enough to minimize stress on your wrists and hands. And thanks to its contoured handle and ergonomic design, the impact wrench is easy to carry and control.

Convenient and Easy to Maintain

The 231C Air Impact Wrench features a streamlined two-piece construction that is easy to maintain. For added convenience, this impact wrench arrives fully lubricated, so it’s ready to use right out of the box.

About Ingersoll Rand

Ingersoll Rand has stood at the vanguard of industrial innovation for over 100 years. From air compressor systems to power tools and beyond, the company manufactures products that offer best-in-class quality, reliability, durability, and performance. Ingersoll Rand is also deeply committed to building a better future. At every level of business, the company promotes environmentally sound practices to achieve progress that is truly sustainable. With offices and plants across the globe, Ingersoll Rand strives to meet the world’s growing need for clean and comfortable air, safe and fresh food, energy efficiency, and sustainability.

Product description

Proto Air Tools, Titanium housing helps to reduce weight, improve balance and ensure maximum durability, ergonomically designed handle-forward design improves balance and control, helping to reduce operator fatigue, robust twin hammer mechanism for efficient energy transfer and long service life, ambidextrous forward/reverse lever can be actuated with a single hand, even with gloves on, Three position Power regulator for forward rotation. Reverse rotation operates at maximum for highest breakaway torque..

• Titanium housing, exhaust deflector and muffler
• 8. 9-inch overall length and 7. 1 cfm average air consumption
• 950 bpm Blow Rate
• 5300 fee speed RPM
• Imported

User questions & answers

Question:	Where is the proto 3/4" j175wp impact wrench made
Answer:	This desk is portable, however it has only two casters. For frequent movement between rooms, we would recommend our MI-7975 (https://www.amazon.com/dp/B07G4MSDGK) or MI-7940 (https://www.amazon.com/dp/B01LYB7GRD)
Question:	What size air fitting does it use
Answer:	Unfortunately, this would only work well for use with a computer/desk chair that is also adjustable as the lowest height is 2-4" too high for any other standard seat. For instance, I got this to work from home and use it while sitting on my couch. My couch is a "big & tall" style couch which means it's essentially deeper and higher than a typical couch (USA). However, even with me being 6'1", it's very uncomfortable and not feasible to use this regularly from my couch due to it being too tall even at the lowest setting. Furthermore, it feels as if the manufacturer took a guess at the min. and max heights as the min is too high for use with any typical seating and the highest setting is far too high for anyone standing that isn't taller than 6'3". The highest setting is simply too high for comfortable use but that's not as much of a problem since it can be lowered to the perfect standing use height. My point here is that they made it too high overall and could have accommodated and had a much more valuable system if they had just built it 2-3" shorter. It would have made it functional for a wider range of users and purposes as well as cut back the cost of materials by maybe 5% creating more profit. It's too bad as I'm not sure what I'm going to do with this thing at the moment so in the meantime, I'm using it right now from my couch while sitting on an additional pillow... Not exactly an ideal situation but at least a short-term fix works until I find a suitable alternative that's as easily folded/stored/moved. Note: It is actually surprisingly light-weight much lower than my original expectation which was nice. Also, it's surprisingly well built and shipped with adequate packaging + protection. Everything is wonderful about this but mine did take a little modification to the telescoping area as when it's extended for any standing position, there is just a few millimeters of play due to the design of the telescoping feature that makes it lean pretty heavily to one side. That's because of the "play" between the male/female sections of the square tubing which isn't eliminated by the plastic female side "guide" hardware (the plastic guide material is too thin so I had to put some cardboard to help fill the tolerance gap and keep the table straight instead of leaning to the left. The adjustable feet do not fix that issue either so it's really just a design flaw. Anyway, it's just unfortunate that they missed the mark on the height range/accommodation as it's perfect other than that and the leaning is a minor problem that's easily resolved with a quick/cheap/free wedge placed in the telescoping area.
Question:	Does anyone no how powerful this impact gun is ? 3/4 j175wp.. I think the mac version is awp075.. someone who has used the gun not just the specs
Answer:	Yes, but very, very easy to do. The only thing that needs assembled, is attaching the 4 wheels to the bottom of the cart (2 swivel & 2 fixed). 4 bolts for each wheel. Bolts and wrench are included. Can be assembled in less than 15 minutes.

Product description

1/2" Composite Impact with 1300 ft-lbs of loosening torque. Patented ergonomic Kevlar handle and housing. Patented exhaust technology - only 86 dBA. Smooth hard-hitting twin-clutch mechanism. Patented forward-reverse switch. Built for the toughest applications like crank bolts.

• Provides 950 ft-lb maximum torque and 1,300 ft-lb of loosening torque
• The NITROCAT 1250-K is a fearless, hard hitting, 1/2" impact wrench that outperforms anything in its class!
• Hard hitting smooth twin clutch mechanism
• Durable KevlarTM reinforced "Body Armor" housing
• Patented ergonomically designed handle
• Patented quiet tuned exhaust (86 dBA)
• Patented easy operation flip lever forward and reverse
• The twin clutch is better suited for heavy duty (frame work, medium to heavy duty trucks)

User questions & answers

Question:	What is the length of the anvil
Answer:	1250k is the new version of the 1200k, it is as simple as that. I actually have a 1200k and have been looking all over for a rebuilt "kit" and took me forever to find one. The one I did find will be here tomorrow so I can rebuild my 1200k, BUT, it was the last kit in stock, and was listed as "used" (apparently the packaging is damaged). The 1250k is also slightly more powerful. You might as well just get the 1250k.
Question:	What's the difference between the 1250 nitrocat and the 1150 aircat
Answer:	Bolt Break Away Torque, ft-lb (N•m) 700 (949)
Question:	Where I work our shop air is set at 80psi. Will this wrench still perform well at this lower pressure
Answer:	600 ft-lb of torque output breaks stubborn fasteners loose easily• Digital microprocessor-controlled switch, maximizes performance, run time and durability• Built-in brake stops anvil and prevents tool from throwing fasteners and sockets• Super bright 1 W LED illuminates work area• USB Built into charger • 7.3 lb with battery
Question:	Besides the price, what is the difference between the nitrocat 1250k and the 1200k
Answer:	we are not the dealer, our cost is much higher than the dealer, we sell most of our product made in USA, they are normally higher in cost

Product features

AIRCAT Nitrocat 1250-K 1/2" Kevlar Twin Clutch Impact Wrench

• The NitroCat 1250-K is a fearless, hard hitting 1/2" impact wrench that out performs anything in its>
• 1,300 ft-lb Loosening torque
• Hard hitting smooth twin clutch mechanism
• Durable KevlarTM reinforced "body armor" housing
• Patented ergonomically designed handle
• Patented quiet tuned exhaust (86 dBA)
• Patented easy operation flip lever forward & reverse
• The twin clutch is better suited for heavy duty (frame work, medium to heavy duty trucks)

AIRCAT PNEUMATIC TOOLS

The AIRCAT line represents the most significant advances in the performance of pneumatic power tools in nearly 30 years. Founded in 1998, our tool line has a substantially reduced level of noise while retaining more power and torque. AIRCAT also incorporates ergonomically engineered handle design to relieve stress and fatigue on the operator’s hands, wrists and arms. AIRCAT features fine-tuned exhaust muffler technology in most tools, which allows discharged air to pass without developing back pressure, thus retaining more power, while significantly reducing noise. More power. Half the noise. AIRCAT is committed to product innovation, high quality levels, high service levels and continued development and expansion of the AIRCAT, NITROCAT and VIBROTHERM DRIVE brands. VIBROTHERM DRIVE are a new assortment of impact wrenches up to 3/4" drive that provide longer working life, lower vibration and shorter length-coupled with "state of the art" cosmetic styling.

Product description

The AIRCAT line represents the most significant advances in the performance of pneumatic power tools in nearly 30 years. Founded in 1998, our tool line has a substantially reduced level of noise while retaining more power and torque. AIRCAT also incorporates a patented ergonomically engineered handle design to relieve stress and fatigue on the operator’s hands, wrists and arms. AIRCAT has the patented tuned exhaust muffler technology in most tools, which allows discharged air to pass without developing back pressure, thus retaining more power, while significantly reducing noise.

• sheer power and performance of 1,295 Feet-pounds (ft-lb) of loosening torque and Max. Torque 900 ft-lbs
• 1,400 Blows Per Minute makes this the strongest hard hitting Twin Hammer 1/2 Impact Wrench on the market
• 15-Percent larger rotor creates unmatched power
• Patented quiet technology at 86 decibels
• 2 year parts and labor warranty

User questions & answers

Question:	its for the stuck rear nut of my streetbike, however the rear thread is reversed thread, so what is the torque/ft. lbs during clockwise motion
Answer:	You may contact aircat for an exact spec,but I'll tell you from using it everyday as a dealer tech, if there is 1 gun that will do it it is this one.
Question:	Do these even last
Answer:	im a tech for chevy and have used this gun everyday since 3/8/14 with not one problem,its now 9/15/16. plus its so much quiter than all the snapons or ingersoll and just as powerful for less cost.thats hard to beat,you wont regret getting this gun
Question:	Trigger smoothness
Answer:	Being a heavy duty diesel mechanic I use this gun every day, as for trigger control you need do be pretty accurate when pulling it in to feather the air flow, I will use it to loosen 3/8 bolts but not 1/4. Also I'm not one to mess around with the power level. To top it off our shop air is at 160psi so you shouldnt have a problem. 160 psi creates one snappy gun!, does sacrifice some life though.
Question:	Can some one tell me how to lubricate the unit
Answer:	The only lubrication I use on all my air tools is a few drops of air tool oil into the air inlet before use each day. The alternative is to use an automatic oiler on the supply air line.. The automatic oiler is only used on air lines that are used for air tools only as the oil will contaminate the hoses if they are also used for spray painting etc....I hope this is of help for you.... ROY

Product features

AIRCAT 1150 Killer Torque 1/2-Inch Impact Wrench

• Most powerful 1/2" impact in it's>
• Hard hitting twin hammer mechanism
• 1,295 (ft-lb) loosening torque
• Durable composite housing
• Ergonomically designed handle
• Quiet tuned exhaust (86 Decibels)
• Easy operation flip lever forward and reverse