11 best impact wrench for air compressor

Product description

Deep impact sockets CR-V 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24. 3-PC Extension bar 3", 6", 10". Storage case.

Reverse 1100 ftlb. Size 7.6 inch, Tool weight: 4.7 lbs, Forward: 3-speed , Reverse: 1-speed, Twin hammer , Air inlet: 1/4 ", Air hose diameter: 3/8(1/2"), Air pressure: 90 psi(120 psi~up), Sound pressure level: 93 dB (A), Air consumption: 8 cfm. Suggestion: 8 gallon compressor at 90 psi works well, for maximum performance, you need at least 15 gallon compressor at 120 psi or higher and a 1/2" hose.

DIY er at garage: Please note~

1. Fill 3 drops air tool oil into air impact wrench before use.

2. No use for long term, please fill air tool oil into air impact wrench and start unload till oil and water all out of tool.

• Exclusive combination set for mechanics and DIYers to easy use daily and storage
• Powerful, Durable Diesel gun with high quality impact sockets and extension bar
• All new improved design from 08/03/2020, more powerful and better quality
• Without sockets 27 30 32 mm in storage case
• We are always trying to offer best price to customers, however as too many buyers who ordered and used once and then returned it, so we are forced to increased the price, we would appreciate your understanding.

Product description

This Ingersoll Rand air impact wrench was introduced over 25 years ago and has been continuously refined. Offers the sheer power and performance features to tackle the toughest jobs with ease - as well as proven durability and economy. CFM at Load: 22, Drive (in.): 1/2, Forward Torque (ft.-lbs.): 350, Working Torque (ft.-lb.): 25-350, Impacts Per Minute (IPM): 1,200, Max. Reverse Torque (ft.-lbs.): 600, Max. Torque (ft.-lbs.): 600, Hammer Mechanism: Twin, Reversible: Yes, Inlet Size (in.): 1/4, Standard Bolt Capacity (in.): 9/16, Speed - No Load (RPM): 8,000, Tool Weight (lbs.): 5.8, Average Air Consumption (CFM): 4.2, Noise Level (dB): 99, Min. Hose Size (in.): 3/8, Tool Length (in.): 7 5/16, Variable Speed: Yes

• Classic, reliable design offers proven power, performance, and durability
• Twin-hammer mechanism delivers a maximum torque of 600 foot-pounds
• Adjustable power regulator provides easy control of torque output
• Ergonomic 2-piece design is easy to operate and maintain
• Arrives fully lubricated and ready for use out of the box
• Exclusive impact mechanism
• Pressure-feed lubrication

User questions & answers

Question:	Wher do you oil this tool? I do not see a place to do this
Answer:	Impacts need lubrication in two spots. The inlet and the hammer mechanism. Ready your owners manual for the procedure. Some have and oil plug and some are taken down and greased by hand.
Question:	Where is this unit manufactured
Answer:	Ingersoll Rand is an American company out of Wisconsin
Question:	What impact extension set and impact socket set do you have, and would you recommend it
Answer:	I got the 1/2" Tekton sockets and extensions and they've worked very well for me. Just be sure to check out the sizing of the sockets. One of the metric sets has bigger sockets but not sequentially getting larger (they skip some sizes). I got the 11mm-23mm I think. Has all the sockets in there. Recommend the gun? Absolutely.
Question:	Trigger gets stuck on mine. I release trigger and it keeps going. Gun is only a yr old. Any ideas
Answer:	Sounds like the spring is hanging up inside. Not sure if you registered with IR or not but I would think that's covered. Haven't had that problem with any other Ingersoll impacts though.

Product features

Ingersoll Rand 231C Super-Duty Air Impact Wrench, 1/2 Inch

Power through tough jobs with ease using the Ingersoll Rand 231C 1/2-Inch Super-Duty Air Impact Wrench. First introduced over 25 years ago and refined ever since, this impact wrench offers proven performance and reliability at an excellent value. The exclusive twin-hammer impact mechanism delivers a maximum torque of 600 foot-pounds, while the adjustable power regulator lets you easily adjust power output to suit your task. Lightweight and easy to maintain, this impact wrench is a reliable choice for vehicle hobbyists and professional mechanics alike.

What's in the Box:

Twin-Hammer Mechanism for Efficient Performance

Delivering a maximum torque of 600 foot-pounds, the 231C Air Impact Wrench offers enough power to install and remove stubborn bolts, lug nuts, and other hardy fasteners. The twin-hammer mechanism helps ensure efficient performance with impressive rotational speeds of up to 8,000 rpm.

Ergonomic Design for Sustained Work

Measuring 7.3 inches in length and weighing 5.8 pounds, the 231C Air Impact Wrench is compact enough to minimize stress on your wrists and hands. And thanks to its contoured handle and ergonomic design, the impact wrench is easy to carry and control.

Convenient and Easy to Maintain

The 231C Air Impact Wrench features a streamlined two-piece construction that is easy to maintain. For added convenience, this impact wrench arrives fully lubricated, so it’s ready to use right out of the box.

About Ingersoll Rand

Ingersoll Rand has stood at the vanguard of industrial innovation for over 100 years. From air compressor systems to power tools and beyond, the company manufactures products that offer best-in-class quality, reliability, durability, and performance. Ingersoll Rand is also deeply committed to building a better future. At every level of business, the company promotes environmentally sound practices to achieve progress that is truly sustainable. With offices and plants across the globe, Ingersoll Rand strives to meet the world’s growing need for clean and comfortable air, safe and fresh food, energy efficiency, and sustainability.

Product description

The ACDelco Brand has been around well over 100 years and its name has become synonymous with quality & reliability. ACDelco power tools are built for people who make a living with their tools, day in and day out, and require exceptional sturdiness and reliability.

 

Specifications



Model Number: ANI405A

Square Drive: ½”

Torque: 500 ft-lbs. (677 Nm)

Standard Bolt Size: 5/8” (M16)

Free Speed: 8,000 RPM

Air Consumption: 17.7 SCFM (833 litter/sec.)

Overall Length: 7-1/4” (184 mm)

Air Inlet: ¼” NPT

Air Pressure: 90 PSI (6.2 Bar)

Air Hose: 3/8” (10 mm)

Tool Weight: 5.72 lbs. (2.60 kg)

• HEAVY DUTY – Our lightweight, heavy duty, and powerful 500 ft-lbs. twin hammer pneumatic impact wrench is engineered with high-quality materials for fast and easy removal work. Equipped with an 1/2” alloy steel head excellent for car tire rotation / removal, change lawnmower blade, etc.
• VERSATILE – Unlike other brands that offer tools with limited features, our air impact wrench features 4 free speed up to 8,000 RPM (No Load Speed) and 1 speed reverse, that enables users to utilize different speeds based on the various applications. Handle exhaust design that reduces surrounding noise level and prevents air blowing in user’s work area.
• USER-FRIENDLY – Lightweight composite housing with ergonomic soft grip handle exhaust design provides comfort for long working hours and a secure grip for maximum control and steadiness. Slim body design molded to securely fit and balance hand torque to help reduce vibration and fatigue with less wear on your hands.
• VALUE KIT – Our Pneumatic Impact Wrench Tool Kit comes with an air impact wrench, a bottle of lubricating oil, and an air hose adapter.
• 100% SATISFACTION GUARANTEED – For over 35 years we have been manufacturing and providing the best products and services to our customers at the lowest prices possible. We are confident that you will absolutely love our air impact wrench that we will stand behind our product with a replacement or your money back! Every purchase comes with a manufacturer’s limited 1-year warranty, so you can buy with confidence!

User questions & answers

Question:	What size hose? Some are saying 1/4 some are saying 3/8ths
Answer:	it is 1/4" air inlet. people may referring to bigger drive size wrenches models (3 quarter inch or larger) for 3/8" inlet.
Question:	work with 6 gallon air compressor
Answer:	Yes, I use it with my 6 gallon DeWalt pancake compressor. I can usually get 2 tires off (10 lugs) before the compressor turns on to refill.
Question:	What kind of warranty does this have
Answer:	I don't know, but here's what's on the Amazon Website for this tool: "Warranty & Support: Manufacturer's warranty can be requested from customer service. Click here to make a request to customer service."
Question:	Mine leaks quite a bit of fluid out the drive shaft seal. You can see it bubble when running. Is that normal for air tools
Answer:	If you see bubbles out the end you put the sockets on, that's not good. If you see oil coming out the air hose connection end the exhaust ports are located under the handle. Its normal to leak oil out of the exhaust port.

Product features

ACDelco 1/2-inch TWIN HAMMER Impact Wrench Pneumatic Tool Family

Designed and engineered to work hard, our air impact wrenches handle the toughest jobs, offering outstanding value. Industrial professionals will be able to release wheel nuts quickly and easily with our versatile impact wrenches; our impact wrenches are feature-packed, giving you the power and torque you need to easily do your job.

1/2-inch Impact Wrench Pneumatic Tool

Built to deliver outstanding performance in any job. With several product lines and a range of different potential configurations, it’s easy to find the right tool for the task. All our products feature an industry-leading combination of performance, ergonomics and durability — everything you need to boost production and keep your team working more efficiently all-day long.

Go Tough and Rugged

Designed to withstand tough use in rugged environments, this impact wrench offers greater efficiency that means less downtime, better tool performance, and less money spent on compressed air.

Different Speed Settings

Available in multiple speeds for each forward and reverse direction, our impact wrench range offers torque outputs to 500 ft-lb. Alloy steel, heat treated, helical gears for maximum durability.

• HEAVY DUTY - Did your last air impact wrench bite the dust a little too soon? Is your current impact wrench not quite making its impact? Our heavy duty impact wrench is second to none!
• POWERFUL IMPACT GUN - Best in class power to weight ratio performance! It equips with a twin hammer offers a powerful 1400 ft-lb of nuts busting breakaway torque, 680 ft-lb working torque and 800 ft-lb reverse torque at 90 PSI
• DURABLE - Weight only 4.6 lbs, rugged aluminum metal front cover for durability, handle is over-molded with rubber to provide grip comfort also help reduce operating fatigue
• CONVENIENCE - one hand forward/reverse switch, two torque settings for max and lower torque setting
• WARRANTY - We are confident about the quality of our product so we offer one year warranty for your peace of mind

User questions & answers

Question:	I have a 6 gallon 150 psi bostitch with 2.6 scmf. your stats say 90 psi, but cmf up to 5.4, is my compressor enough to turn this wrench well
Answer:	Yes.
Question:	where is this made
Answer:	Not the typical sized Easter eggs, but the larger ones, they will. Pick the duck sized, not the chicken. lol!
Question:	Does this have a valve style regular or does the switch just limit trigger movement
Answer:	Have not ordered this item so I don’t know

Product features

UNIQUE FEATURES

• Rugged Front Cover made of aluminum to provide light weight and durability. Better than other tools using metal front cover, which will add weight and unbalance.
• Rubber Pad for adding protection of tool from damages.
• Patented Design One Hand F/R Switch for convince when operating the tool. User can easily change the direction with one hand. The F/R selector lever is located behind the trigger and is easily thumb-accessed especially helpful when operates in a very tight space. Unique to this tool is the ability to be operated by a left or right handed mechanic.
• Two Torque Switch Settings for max and low in forward and reverse mode. This switch is also easily assessed with one hand when in the tight space.
• Ergonomics Over-Molded Rubber Handle to reduce operation fatigue and prevent cold touch.

DURABLE COMPOSITE HOUSING

2463T main housing is made of durable high impact resistant composite plastic material. It is strong and tough can withstand well under low temperature environment also be able to protect tools from damages. Another benefit of composite housing is it can insulate cold air in the handle while working on the project.

TWIM HAMMER MECHANISM

This 1/2" heavy duty impact wrench equip with Twin Hammer offers powerful 1400 ft-lb nut busting breakaway torque, excellent power-to-weight ratio: 800 ft.-lbs. of reverse torque. The hammer assembly is made of high quality heat treated metal; make it tough and durable can last a long period of continuously usage.

COMPACT AND RILABLE

Measuring 6.85" / 174.2 mm long and 2.83" / 71.9 mm wide and weight only 4.4 lbs, 2463T is very compact compare to similar products on the market are longer and heavier. With it’s ergonomic design, 2463T is easy to carry and can control with confidence.

POWERFUL NUT BUSTING TORQUE

2463T is capable of producing 1400 ft-lb nut busting breakaway torque will make your toughest job easier.

TECHNICAL SPECIFICATIONS

• Breakaway torque 1,400 ft-lb
• Maximum speed 7300 rpm
• Maximum reverse 800ft-lb torque at 90 psi
• Working torque 140-680 ft-lb at 90 psi
• Weight 4.4 lb
• Average air consumption 5.4 cfm
• Minimum 3/8" hose
• Air inlet 1/4"

Product description

Includes the 231G Impactool, the 170G ratchet, and combo socket set

Exclusive twin hammer impact mechanism in the 231G

Heat-treated ratchet head for longer life

Ergonomic grip on both tools for ease of use

Ideal for vehicle maintenance

Part of Ingersoll Rand's Edge series of power tools, this set includes a 231G air impact wrench and a 170G air ratchet wrench along with a five-piece socket set. The impact wrench's 6-vane motor yields an optimal power-to-weight ratio, while the ratchet wrench's motor delivers 55 foot pounds of torque and 170 RPM of free speed. Both tools sport an ergonomic design for greater comfort. A blow-molded storage case makes carrying the set easy.

231G Air Impact Wrench At a Glance: Impact wrench offers exceptional power-to-weight ratio Ratchet wrench delivers 55 foot pounds of torque Ergonomic design makes tools comfortable to use Backed by a one-year limited warranty

The 231G air impact wrench's features include a variable speed trigger (click to enlarge).

The 231G air impact wrench comes equipped with a forward/reverse power regulator (click to enlarge).

Air Impact Wrench

Like all of Ingersoll Rand's Edge series Impactools, the 231G air impact wrench is rugged, compact, and lightweight. The air impact wrench is equipped with an exclusive twin hammer impact mechanism, and thanks to a 6-vane motor, the tool offers an exceptional power-to-weight ratio. Other highlights include a variable speed trigger, a handle exhaust, and a forward/reverse power regulator. The wrench measures 7.3 inches long and weighs 5.8 pounds.

Air Ratchet Wrench

The Ingersoll Rand 170G air ratchet wrench sports a 3/8-inch drive and a heat-treated ratchet head for a longer life. The tool's powerful motor delivers 55 foot pounds of torque and 170 RPM of free speed for optimal performance.

Award-Winning Ergonomic Design

The Ingersoll Rand 231G air impact wrench and 170G air ratchet wrench each feature an award-winning ergonomic design that delivers exceptional torque accuracy along with increased productivity and safety. The tools' contoured grip offers greater comfort while you're working.

Carrying Case and Socket Set

Included with the two wrenches are a blow-molded carrying case and a five-piece socket set containing a 1/2-inch socket, a 9/16-inch socket, a 5/8-inch socket, a 3/4-inch socket, a 7/8-inch socket, and an adapter (3/8-inch female to 1/2-inch male). The socket set is designed to fit a 1/2-inch drive.

About Ingersoll-Rand

Ingersoll Rand is a global, diversified firm providing products, services, and solutions to enhance the quality and comfort of air in homes and buildings, transport and protect food and perishables, secure homes and commercial properties, and increase industrial productivity and efficiency. Driven by a 100-year-old tradition of technological innovation, Ingersoll Rand enables its customers to create progress and a positive impact in their world.

What's in the Box

Ingersoll Rand 231G air impact wrench, Ingersoll Rand 170G air ratchet wrench, socket set, and carrying case.

Part of Ingersoll Rand's Edge series, this set includes an air impact wrench and an air ratchet wrench along with a five-piece socket set (click each to enlarge).

From the Manufacturer

This kit gives you everything you need for success. The kit includes a 231G 1/2-Inch Impactool, a 170G 3/8-Inch Ratchet, a socket set, and a blow-molded carrying case. Part of Ingersoll Rand's Edge Series line of air tools: legendary performance at an affordable price.

• Includes the 231G Impactool, the 170G ratchet, and combo socket set
• Exclusive twin hammer impact mechanism in the 231G
• Heat-treated ratchet head for longer life
• Ergonomic grip on both tools for ease of use
• Ideal for vehicle maintenance

User questions & answers

Question:	Is this reliable for everyday use on heavy machinery
Answer:	I agree with Albert, this is a very reliable set so long as it is maintained.
Question:	Is it loud like other air rachets
Answer:	Same as your average air ratchet
Question:	Will the impact wrench work well using a Dewalt 6gal, 165psi, pancake compressor
Answer:	Yes, it will work but the compressor will need to recover constantly and you will have to wait a little between uses.
Question:	What is the torque rating of this impact wrench? CFM
Answer:	I think the impact is 650 ft lbs and CFM is 20+ under load. I run mine with a Husky 155 psi 17 gal tank compressor. I really love this set. You will not be disappointed. Bought mine at lowes a while back and it came in a nice plastic case.

Product features

Ingersoll Rand 2317G Edge Series Air Impactool and Ratchet Kit

This set includes a 231G air impact wrench and a 170G air ratchet wrench along with a five-piece socket set. The impact wrench's 6-vane motor yields an optimal power-to-weight ratio, while the ratchet wrench's motor delivers 55 foot pounds of torque and 170 RPM of free speed. Both tools sport an ergonomic design for greater comfort. A blow-molded storage case makes carrying the set easy.

What's in the box?

Powerful, yet Durable

The exclusive twin hammer impact mechanism delivers a balanced blow, while its powerful 6-vane motor is durable and tough enough to complete the task at hand. Featuring 500 ft-lb of max reverse torque, this air impact wrench is great to have around the garage, on the farm, or for any task requiring quick removal of fasteners.

Ergonomically Designed

The Ingersoll Rand 231G air impact wrench and 170G air ratchet wrench each feature an ergonomic design that delivers exceptional torque accuracy along with increased productivity and safety. The tools' contoured grip offers greater comfort while you're working.

Lightweight, yet Sturdy

At only 2.6 pounds, the Ingersoll Rand 170G air ratchet wrench is exceptionally rugged and compact. The wrench sports a 3/8-inch drive and an exclusive TwinPawl Plus ratchet head that's been heat-treated for a longer life. The tool's powerful motor delivers 55 foot pounds of torque and 170 RPM of free speed for optimal performance.

About Ingersoll Rand

Ingersoll Rand has stood at the vanguard of industrial innovation for over 100 years. From air compressor systems to power tools and beyond, the company manufactures products that offer best-in-class quality, reliability, durability, and performance. Ingersoll Rand is also deeply committed to building a better future. At every level of business, the company promotes environmentally sound practices to achieve progress that is truly sustainable. With offices and plants across the globe, Ingersoll Rand strives to meet the world’s growing need for clean and comfortable air, safe and fresh food, energy efficiency, and sustainability.

Product description

The Campbell Hausfeld 1/2-inch twin hammer impact wrench (TL140200AV) is designed for DIY projects and general-purpose applications such as automotive maintenance and repair. A twin hammer mechanism helps this impact wrench deliver up to 550 ft.-lbs. of torque with reduced vibration. A soft comfort grip helps reduce fatigue. Not intended for assembly line applications or commercial usage. Finish your projects faster and easier with Campbell Hausfeld - The Air Power Expert.

• Pair this impact wrench with the right Campbell Hausfeld air compressor to generate 550 FT/LBS of nut-busting torque so you can rotate your car's tires, change a lawnmower blade, or repair your brakes.
• 3-Speed power regulator makes it easy to select the speed you need to get the perfect tension on your lug nuts every time.
• The sturdy composite design creates a long-lasting durable tool so you can complete job after job with confidence.
• This impact wrenches light weight, smooth twin-hammer mechanism, and ergonomic soft grip design work together to reduce vibration and fatigue so you can work longer with less wear on your hands.
• Combine with a Campbell Hausfeld 30 gallon air compressor (VT6271 or VT6358) and air hose (PA117701AV) for best results
• This impact wrench is backed by a 1 Year Limited warranty from Campbell Hausfeld - The Air Power Experts

User questions & answers

Question:	Will it work with campbell hausfeld wl651400aj it says displacement is 9.9 cfm
Answer:	I've used this impact a few times over the past year w/my 6 cfm compressor @ 90psi w/o any issues at all. The min specs on it are 3.4 cfm @ 90psi, so your fine @ 9.9. Can say it's probably the smoothest impact gun I've ever used to remove lug nuts...
Question:	Will this work with a 2.6scfm/90psi compressor? Need it for tire lugs
Answer:	Yes your compressor is compatible. However, in using a compressor with only 2.6cfm, you may at times need to pause for a moment to let the compressor build pressure before continuing. To run any air wrench continuously without ever pausing, you would need a compressor producing 3.4cfm. With that being said, you will have no problem using this air wrench with your compressor, especially for small jobs like removing lug nuts.
Question:	Does it have adjustable torque setting
Answer:	It has 3 regulator settings in forward (full, med, low) and only full power in reverse. You will need a torque wrench to set a certain torque
Question:	Is this air powered or electric
Answer:	This Impact wrench ONLY runs on a highly compressed mixture of specific gases including nitrogen (78.09%), oxygen (20.95%), argon (0.93%), carbon dioxide (0.039%) and other trace gases (0.003%). It's best if you do not deviate from this special mix. Your (5) high-pressure compressed gas tanks should be connected through flow-metering regulators to a mixing manifold. The "mix" is then sent to the impact device through sterilized, medical-grade reinforced PTFE tubing at an exact pressure of 827.3708 kilopascals (+/- 0.01 kP). The exhaust gas mix can then be recovered for re-use after purification, oil seperation and de-ionization per OSHA regulations. Do not even think of using any other gas mixture and certainly not "electric" to power this device. "Electric" can be dangerous and is best left to use by licensed sorcerers and other such weird folk.

Product features

TL140200AV: Comfort and Power

Whether you’re a weekend warrior or automative enthusiast, the right tool is critical to completeing the job. This twin-hammer clutch 1/2 inch impact wrench from Campbell Hausfeld provides maximum power (550 ft lbs of torque) at a great price! A variable speed regulator provides low, medium and full power output in the forward direction and maximum power in reverse -- to tackle all of your car repair as well as lawn and garden maintenance projects. The smooth, balanced impact mechanism and rubberized grip reduce user experience.

Twin Hammer Impact Mechanism

The TL140200AV impact wrench features a powerful and balanced twin hammer impact mechanism which delivers accurate results with reduced vibration.

Reliable Power

This unit boasts 550 ft- lbs of maximum torque, 1,200 impacts per minute, and 8,000 rpm. to tackle tough lugs and bolts with ease.

Comfortable, User Friendly Design

Weighing in at 4.4. lbs, the lightweight composite design combined with soft rubber grip reduces fatigue during use. The optimally placed speed regulator allows for convenient control of both speed settings (low, medium, full) and directional settings (forward, reverse).

Product description

Recommended air pressure: 90 PSI suggested air compressor: 3 HP No load speed: 7500 rpm max torque: 600 ft/lb air inlet: 1/4-inch NPT air hose (ID): 3/8-inch average air consumption: 6.5CFM

• [HEAVY DUTY]: This pneumatic impact wrench with twin hammer fastens at a no-load speed of 7, 500 RPM and delivers a maximum breakaway torque of 600 foot-pounds while with a working torque of 450 foot-pounds, which provide heavy-duty power and smooth balanced blows for all your automotive and workshop projects
• [ERGONOMICS]: The ergonomically grooved pistol-type handle gun grip is designed to maintain operator control, efficiency, accuracy, and reduce fatigue and slippage during extended periods of use to give the user an optimal experience at the work site
• [FEATURES]: The air tool has a control mechanism to easily switch between clockwise and counter-clockwise rotational torque direction to suit your fastening needs against stubborn lug nuts with the accompaniment of a ½” drive socket from your socket sets
• [INCLUDES]: Air impact wrench kit includes a coupler fitting, allen wrench, and lubricant oil accessories for tool maintenance to keep your impact in top shape ensuring lasting service life and longevity at the home or garage
• [APPLICATION]: This tool is recommended to be used with an air compressor of 3 horsepower (HP) and 90 psi air pressure and has a ¼” NPT air inlet for use with a 3/8” air hose

User questions & answers

Question:	Can you set torque settings when tightening lugs so as not to over torque
Answer:	There are only stops at 45 degree bevel on left and right. The bevel locking clamp has a large knob on it that makes it easy to micro adjust the bevel without fighting against the weight of the saw, and the degrees Gage is fairly easy to read. Will your cut be exactly 22.500000 degrees? No, but you can consistently get a stain grade joint nonetheless. For fast production, screw a tall auxiliary fence in place, and you can bed and cut up to a 5" crown quickly and consistently
Question:	How long is the air hose that comes with product
Answer:	I found the detents to be pretty solid, no play before clamping down. The fences, however were near impossible to properly align.
Question:	Is there a warranty
Answer:	Easily! The fence itself is 5" tall, and under blade capacity is 7"
Question:	I bought this product a couple of months ago was working really good than one day just stopped working is it possible for a trade in maybe the one I h
Answer:	Yes, white is 140 ft lbs, I think light blue does 150 ft lbs. I have a GMC 2500 HD so the only one I currently use is the white 140 ft lb.

Product description

Deep impact sockets CR-V 3/8", 7/16”, 1/2", 9/16”, 5/8", 11/16”, 3/4", 13/16”, 7/8", 15/16”, 1”. 3-PC Extension bar 3", 6", 10". Storage case.

1100 ftlb. Size 7.6 inch, Tool weight: 4.65 lbs, Forward: 3-speed , Reverse: 1-speed, Twin hammer , Air inlet: 1/4 ", Air hose diameter: 3/8(1/2"), Air pressure: 90 psi(120 psi~up), Sound pressure level: 93 dB (A), Air consumption: 8 cfm. Suggestion: 8 gallon compressor at 90 psi works well, for maximum performance, you need at least 15 gallon compressor at 120 psi or higher and a 1/2" hose.

DIY er at garage: Please note~

1. Fill 3 drops air tool oil into air impact wrench before use.

2. No use for long term, please fill air tool oil into air impact wrench and start unload till oil and water all out of tool.

• All new improved design from 11/11/2020, more powerful and better quality
• New arrived from 11/11/2020, all new kit with sockets and extension in a storage

User questions & answers

Question:	More info please! db rating? multiple power settings? who and how are warranty claims handled
Answer:	The box is sealed - the bottle itself, you must remove the clear cap then break the red cap seal before opening.
Question:	What is the actual torque of this impact? It seems that the info and specs keep changing
Answer:	Great white, tiger shark, thesher shark, whale shark, lemon shark, bull shark
Question:	Tiene estuche para guardarlo
Answer:	They do not, we are phasing out the playmat in our tubes.
Question:	En el inicio dice que este producto no se envía a Colombia, Amazon. Si lo trae
Answer:	Some might. Depends on the flexibility of the fins.

Product description

The AIRCAT line represents the most significant advances in the performance of pneumatic power tools in nearly 30 years. Founded in 1998, our tool line has a substantially reduced level of noise while retaining more power and torque. AIRCAT also incorporates a patented ergonomically engineered handle design to relieve stress and fatigue on the operator’s hands, wrists and arms. AIRCAT has the patented tuned exhaust muffler technology in most tools, which allows discharged air to pass without developing back pressure, thus retaining more power, while significantly reducing noise.

From the Manufacturer

The AIRCAT 1200-K is a no non-sense, hard hitting 1/2-inch impact wrench that outperforms anything in its class! Used by many NHRA Top Fuel Race teams. All the power, half the noise! The AIRCAT tool line has a substantially reduced level of noise while retaining more power and torque. Our tools have been tested and shown to operate at 82-86 dBa (decibels), far below the OSHA guidelines. This feature benefits not only the mechanic but also the overall business. The patented tuned exhaust muffler technology, in all the tools, allows discharged air to pass without developing back pressure, thus retaining more power, while significantly reducing noise. AIRCAT has innovated through-the-handle exhaust design, which incorporates its revolutionary worldwide patented internal muffler/filter. The benefits include reduced hazards from breathing exhausted air particulates, the elimination of blow-by into the operators eyes and lungs as well as reduce noise. AIRCAT also incorporates a patented ergonomically engineered handle design to relieve stress and fatigue on the operators hands, wrists and arms. The patented AIRCAT handle offers better overall distribution of weight for a balanced tool and provides a unique grip that makes it easier to use for prolonged periods of time. AIRCAT offers a full line of pneumatic tools, including impact wrenches, air ratchets, reversible drills, die grinders, and cut-off tools. Established 1998 in Spokane, Washington AIRCAT is a line of high quality pneumatic hand tools that incorporates the unique and multi-patented exhaust muffler/filter technology. The AIRCAT tool line has a substantially reduced level of noise while retaining more power and torque. The AIRCAT impact wrench line offers both twin hammer and twin clutch mechanisms.

• AirCAT 1200-K 1/2" NITROCAT Impact wrench 1250 ft-lb

User questions & answers

Question:	Will a 30 gallon compressor that puts out 5.1 cfm @90psi work? aircat site says this tool is 8 cfm
Answer:	NO they are NOT!!!! I only ordered them because it said in description they were easy to remove. To my dismay I priced 100's of items to find out they will not remove without either renewing the item or leaving a huge papery mess.
Question:	Does the hammer case need oil or grease
Answer:	Floradix is sourced from Iron-fed yeast, it contains some wheat germ and is sweetened with honey. Floravital contains no yeast, gluten or honey. It is the ideal choice for those who may have yeast intolerances, candida or gluten allergies.
Question:	I didn't check the free spin on the chuck until after I started using it . Is it supposed to be hard or is it already having issues
Answer:	Soy free
Question:	What's the difference between Aircat and Nitrocat ? Which should I buy? Is the Aircat so much smaller that it will fit into tight spots
Answer:	These herbs do not show on the label.

Product features

AIRCAT Nitrocat 1200-K 1/2" Kevlar Twin Clutch Impact Wrench

• The NitroCat 1200-K is a no non-sense, hard hitting 1/2" impact wrench that out performs anything in its>
• 1,295 ft-lb Loosening torque
• Hard hitting smooth twin clutch mechanism
• Durable KevlarTM composite housing
• Patented ergonomically designed handle
• Patented quiet tuned exhaust (86 dBA)
• Patented easy operation flip lever forward & reverse
• The twin clutch is better suited for heavy duty (frame work, medium to heavy duty trucks)

AIRCAT PNEUMATIC TOOLS

The AIRCAT line represents the most significant advances in the performance of pneumatic power tools in nearly 30 years. Founded in 1998, our tool line has a substantially reduced level of noise while retaining more power and torque. AIRCAT also incorporates ergonomically engineered handle design to relieve stress and fatigue on the operator’s hands, wrists and arms. AIRCAT features fine-tuned exhaust muffler technology in most tools, which allows discharged air to pass without developing back pressure, thus retaining more power, while significantly reducing noise. More power. Half the noise. AIRCAT is committed to product innovation, high quality levels, high service levels and continued development and expansion of the AIRCAT, NITROCAT and VIBROTHERM DRIVE brands. VIBROTHERM DRIVE are a new assortment of impact wrenches up to 3/4" drive that provide longer working life, lower vibration and shorter length-coupled with "state of the art" cosmetic styling.

Product description

Edge Series 3/8” Air Ratchet Wrench is equipped with a powerful motor delivering 55FT/LB of maximum torque and 170 RPM of free speed for superior performance results. Features a twin pawl plus head design combined with a heat treated ratchet head ensuring longer life and an ergonomic grip providing better comfort to keep you on the job and finishing tasks quickly. Ideal for a broad range of applications where disassembly and assembly of products within tight spaces are necessary, such as general engine repair, home projects and light industrial work.

Remove and install threaded fasteners with ease using the 170G air ratchet wrench from Ingersoll Rand. Part of the company's line of Impactools power tools, the wrench comes equipped with a 3/8-inch drive and a reinforced, heat-treated ratchet head for greater durability. Its powerful motor yields 55 foot pounds of torque and 170 RPM of free speed to tackle tough jobs. An ergonomic grip makes the wrench comfortable to use.

170G Air Ratchet Wrench At a Glance: Features 3/8-inch drive and heat-treated ratchet head Yields 55 foot pounds of torque and 170 RPM of free speed Ergonomic design makes wrench comfortable to use Backed by a one-year limited warranty

This tool's TwinPawl Plus ratchet head has been heat-treated for a longer life (click to enlarge).

An ergonomic grip offers greater comfort while you're working (click to enlarge).

Lightweight Yet Sturdy Construction

Like all of Ingersoll Rand's Edge Series Impactools, the Ingersoll Rand 170G air ratchet wrench is exceptionally rugged, compact, and lightweight. The wrench sports a 3/8-inch drive and an exclusive TwinPawl Plus ratchet head that's been heat-treated for a longer life. The tool's powerful motor delivers 55 foot pounds of torque and 170 RPM of free speed for optimal performance.

Award-Winning Ergonomic Design

The Ingersoll Rand 170G air ratchet wrench features an award-winning ergonomic design that delivers exceptional torque accuracy along with increased productivity and safety. The tool's contoured grip offers greater comfort while you're working.

About Ingersoll-Rand

Ingersoll Rand is a global, diversified firm providing products, services, and solutions to enhance the quality and comfort of air in homes and buildings, transport and protect food and perishables, secure homes and commercial properties, and increase industrial productivity and efficiency. Driven by a 100-year-old tradition of technological innovation, Ingersoll Rand enables its customers to create progress and a positive impact in their world.

What's in the Box

Ingersoll Rand 170G air ratchet wrench.

From the Manufacturer

3/8-Inch Drive Air Ratchet - The 170G delivers the power you need to get the job done. At 55-Feet-pound of maximum torque and 170 rpm free speed, this tool is the perfect fit for all of your projects. Part of Ingersoll Rand's Edge Series line of air tools: legendary performance at an affordable price.

• Equipped with 3/8-inch drive
• Powerful motor delivers 55 foot-pounds of torque and 170 rpm of free speed
• Heat-treated ratchet head for longer life
• Ergonomic grip for ease of use
• Ideal for general engine repair, home projects, and light industrial applications

User questions & answers

Question:	How loud is this ratchet? I'm in the market for an IR ratchet that is easy on the ears but has good torque, preferably 3/8", does such a thing exist
Answer:	It is fairly loud. Sounds like most air ratchets.
Question:	How do I remove the plastic el tag from wrench
Answer:	Pliers and some muscle.
Question:	where is it made
Answer:	China
Question:	Will this loosen rusted bolts like an impact driver? I need something to free up bolts in tight spaces
Answer:	no, this air ratchet will spin the fastener out after you have unseized the nut or bolt. However, If you're looking for an "impact" air ratchet Ingersoll has a newer product line called "hammer-head"...that may be what you're looking for.

Product features

Ingersoll Rand 170G 3/8-Inch Edge Series Drive Air Ratchet

Ingersoll Rand's Edge Series 170G delivers the power you need to get the job done. At 55 ft-lb of maximum torque and 170 rpm free speed, this tool is the perfect fit for all of your projects. The 170G can be used in a broad range of applications where light disassembly and assembly of products is necessary. Use the 170G to access those hard to reach tight spaces.

What's in the box?

Lightweight Yet Sturdy Construction

At only 2.6 pounds, , the Ingersoll Rand 170G air ratchet wrench is exceptionally rugged and compact. The wrench sports a 3/8-inch drive and an exclusive TwinPawl Plus ratchet head that's been heat-treated for a longer life.

Ergonomic Design

The Ingersoll Rand 170G air ratchet wrench features an ergonomic design that delivers exceptional torque accuracy along with increased productivity and safety. The tool's contoured grip offers greater comfort while you're working.

Power in a Compact Frame

The tool's powerful motor delivers 55 foot pounds of torque and 170 RPM of free speed for optimal performance. With a length of 10.4 inches, it is sleek enough to reach every bolt and get the job done.

About Ingersoll Rand

Ingersoll Rand has stood at the vanguard of industrial innovation for over 100 years. From air compressor systems to power tools and beyond, the company manufactures products that offer best-in-class quality, reliability, durability, and performance. Ingersoll Rand is also deeply committed to building a better future. At every level of business, the company promotes environmentally sound practices to achieve progress that is truly sustainable. With offices and plants across the globe, Ingersoll Rand strives to meet the world’s growing need for clean and comfortable air, safe and fresh food, energy efficiency, and sustainability.

Product description

The AirCat line represents the most significant advances in the performance of pneumatic power tools in nearly 30 years. Founded in 1998, our tool line has a substantially reduced level of noise while retaining more power and torque. AirCat also incorporates a patented ergonomically engineered handle design to relieve stress and fatigue on the operator’s hands, wrists and arms. AirCat has the patented tuned exhaust muffler technology in most tools, which allows discharged air to pass without developing back pressure, thus retaining more power, while significantly reducing noise.

From the Manufacturer

All the power, half the noise! The AIRCAT tool line has a substantially reduced level of noise while retaining more power and torque. Our tools have been tested and shown to operate at 82-86 dBa (decibels), far below the OSHA guidelines. This feature benefits not only the mechanic but also the overall business. The patented tuned exhaust muffler technology, in all the tools, allows discharged air to pass without developing back pressure, thus retaining more power, while significantly reducing noise. AIRCAT has innovated through-the-handle exhaust design, which incorporates its revolutionary worldwide patented internal muffler/filter. The benefits include reduced hazards from breathing exhausted air particulates, the elimination of blow-by into the operators eyes and lungs as well as reduce noise. AIRCAT also incorporates a patented ergonomically engineered handle design to relieve stress and fatigue on the operators hands, wrists and arms. The patented AIRCAT handle offers better overall distribution of weight for a balanced tool and provides a unique grip that makes it easier to use for prolonged periods of time. AIRCAT offers a full line of pneumatic tools, including impact wrenches, air ratchets, reversible drills, die grinders, and cut-off tools. Established 1998 in Spokane, Washington AIRCAT is a line of high quality pneumatic hand tools that incorporates the unique and multi-patented exhaust muffler/filter technology. The AIRCAT tool line has a substantially reduced level of noise while retaining more power and torque. The AIRCAT impact wrench line offers both twin hammer and twin clutch mechanisms.

• Strongest 3/8-inch impact in its class; Lightweight, hard hitting twin clutch 3/8
• Durable composite housing; superior internal mechanics; Weight (lbs) - 2.75
• Ergonomically designed handle (reduces operator fatigue); Patented through-the-handle exhaust (keeps debris away from face)
• Patented quiet technology (86 decibels)
• Easy operation flip lever - forward and reverse

User questions & answers

Question:	what is it's torqueing abilities
Answer:	The listing says handwrite only, meaning not for printing. If you want printable ones look for descriptions that say "print/write" and those will work in printers.
Question:	Is there a protective boot for this impact
Answer:	If your printer accepts stickers this small, they are about the size of a quarter
Question:	Does it have a brake which stops the gun from turning when you take your finger off the trigger
Answer:	The roll is 1 and 1/8 inches wide and 4 and 3/8 inches diameter.
Question:	Is this really a twin clutch or a twin hammer ordered one and it came as a twin hammer and would like another twin clutch?? Thank You Robert
Answer:	If you mean would they stick to something that is embossed and maybe not the most even surface, yes I believe they would. They are ultra sticky. Once they’re on, they’re on good. If you are wondering if you could emboss them, I’m not sure. That is an interesting concept tho. Maybe not alone, but once it is applied to whatever it’s going to be stuck to. I would think the label on its own isn’t thick enough to emboss without tearing at least in some spots.

Product features

AIRCAT Nitrocat 1355-XL 3/8" "Xtreme Power" Impact Wrench

• The NITROCAT 1355-XL is a no non-sense, hard hitting 3/8" impact wrench that incorporates the twin hammer mechanism
• Industry leading 700 ft-lb of loosening torque and 1,750 blows per minute
• Provides all the torque you need and tremendous speed to get the job done
• Patented quiet tuned exhaust (86 dBA)
• Patented easy operation flip lever forward & reverse
• Great for brake calipers, transmission work

AIRCAT PNEUMATIC TOOLS

The AIRCAT line represents the most significant advances in the performance of pneumatic power tools in nearly 30 years. Founded in 1998, our tool line has a substantially reduced level of noise while retaining more power and torque. AIRCAT also incorporates ergonomically engineered handle design to relieve stress and fatigue on the operator’s hands, wrists and arms. AIRCAT features fine-tuned exhaust muffler technology in most tools, which allows discharged air to pass without developing back pressure, thus retaining more power, while significantly reducing noise. More power. Half the noise. AIRCAT is committed to product innovation, high quality levels, high service levels and continued development and expansion of the AIRCAT, NITROCAT and VIBROTHERM DRIVE brands. VIBROTHERM DRIVE are a new assortment of impact wrenches up to 3/4" drive that provide longer working life, lower vibration and shorter length-coupled with "state of the art" cosmetic styling.