14 best dewalt impact wrenches

Product description

The DEWALT DCF899M1 20v MAX XR Brushless High Torque 1/2" Impact Wrench with Dentent Pin Anvil (4.0 Ah) features up to 700 ftpounds of MAX Torque and 1200 ftpounds of MAX breakaway torque. This tool has a compact design of 8 13/16" in length and weighs only 7.2pounds for ease of use. It also has multi speed control for a variety of applications (0 400/1,200/1,900 RPM). A heavy duty 1/2" Anvil with detent pin. An LED light with 20 second delay allows for increased visibility in dark or tight workspaces. Includes: DCF899 20v MAX XR Brushless High Torque 1/2" Impact Wrench with Dentent Pin Anvil, 20V XR Lith Ion battery (4.0 Ah), Fast Charger, Tool bag.

• Compact design and lightweight at only 7.2 pounds
• Heavy Duty 1/2 inch Anvil with detent pin
• Up to 700 feet pounds of MAX Torque
• LED light with 20 second delay for increased visibility
• Maximum Speed (RPM):1900

User questions & answers

Question:	using 1 of the 3 speeds ,is there anyway to set the torque to 100 ft-lbs
Answer:	The manual states that the maximum torque values for each speed are 100/300/700. So if you set it to Speed 1 then the maximum torque it will deliver is 100 ft-lbs.
Question:	Dofference between dcf899m1 and dcf899b
Answer:	Dewalt codes are as follows B = bare tool. No battery. C = Compact (1.5Ah) battery. D = 2Ah compact battery. L = 3Ah battery. M = 4Ah battery. P = 5Ah battery. T = 6Ah Flexvolt battery. X = 9Ah Flexvolt battery. DCF899 = Detent pin version. DCF899H = Hog ring version. So, DCF899M1 is detent pin with 1 4Ah battery. If you see something like DCF899HP2, that means hog ring version with 2 5Ah battery. Otherwise, whether it's DCF899B or DCF899M1 or DCF899P1, the tool itself is EXACTLY the same.
Question:	Is this a kit, or just the lone drill
Answer:	DCF899B is the DCF899 impact with a detent anvil sold as a (B) bare tool. DCF899HB is the DCF899H impact with a (H) hog ring anvil* sold as a (B) bare tool. DCF899M1 is the DCF899 impact with detent anvil sold as a kit with charger, one (1) 4Ah battery, and a bag. DCF899P1 is the DCF899 impact with detent anvil sold as a kit with charger, one (1) 5Ah battery, and a bag. DCF899P2 is the DCF899 impact with detent anvil sold as a kit with charger, two (2) 5Ah batteries, and a bag. DCF899HP2 is the DCF899H impact with hog ring anvil* sold as a kit with charger, two (2) 5Ah batteries, and a bag *Difference between detent and hog ring: Detent holds socket more securely but must be put on so pin lines up with hole in impact socket & will need a small screwdriver or the like to release. Hog ring allows one to put on and pull off impact sockets by hand, though usually pretty difficult at first until broken in. Of course you should only use impact sockets/extensions If you put a hand socket (usually chrome) on a hog ring it will lock on and you will need a tool to get it off because the indentations are different. That's also a good way to break the hog ring, but if that happens they are cheap and easy to replace. Detents are usually more suited for situations where socket changes are infrequent like in a factory setting & hog rings for where frequent changes are needed like automotive work.
Question:	My boyfriend mentioned briefly he wanted a dewalt gun that apparently is so strong that he can change tires within minutes with it. could this be it
Answer:	Yes. This could be it. This is currently Dewalts newest and strongest cordless impact wrench. You might want to look for the one that comes with batteries and a charger if he doesn't have that already. Be mindful that this model comes with two variations: hog ring and detent anvil. Detent anvil holds the socket tighter but uses a tool (which is probably included)to change the sockets while hog ring holds the socket on with a split washer but doesn't require a tool. Great tool though with either option.

Product features

DEWALT DCF899M1 20V MAX XR Brushless High Torque Impact Wrench with Dentent Pin Anvil

The DCF899B 20V MAX* XR Brushless High Torque 1/2" Impact Wrench w. Detent Pin Anvil is powerful and versatile for fastening various applications. Designed for comfort, speed control, and working in dark spaces.

Features:

• Up to 700 ft-lbs of max torque and 1200 ft-lbs of max breakaway torque
• Compact design of 8-13/16" in length
• Multi-speed control for a variety of applications (0-400/ 1,200/ 1,900 RPM)
• 1/2" Anvil with detent pin (also available with hog ring)
• LED light with 20-second delay for increased visibility

Product description

The DEWALT 20V Max 1/2 Inch High Torque Impact Wrenches are designed for mechanical contractors, plumbers, automotive users, maintenance and repair professionals and remodelers. They are designed for professionals who demand a tool for difficult fastening applications, such as driving and removing fasteners, nuts and bolts in wood, metal and concrete. These impact wrenches deliver the power, durability and control they need to tackle the toughest tasks on the jobsite. They have 400 Feet/Pound of torque to perform a wide range of heavy duty fastening applications.

• 400-Feet Pound of maximum torque to perform a wide range of heavy-duty fastening applications
• Ergonomic handle provides user superior comfort and control
• Variable speed trigger with electric brake provides user improved control
• Durable magnesium gear case and all metal transmission for extended durability
• Bare tool, batteries and charger sold separately

User questions & answers

Question:	Is there a 18volt tool similar in torque value in the dewalt line
Answer:	no stay with 20v
Question:	How easy is it to remove a socket? Do you have to press the pin, or can you just pull it off? The hog ring version doesn't seem to be available
Answer:	I honestly think the hog ring is a solution to a problem that doesn't exist. Detente is better. Not hard to use at all. It won't wear out. The hog ring will be good for about a year.
Question:	can you use the battery 20v max lithium ion 1.5ah with this tool
Answer:	Yes 20V is all that matters. You can use any 20V Dewalt battery with any 20V Dewalt tool. Still the amp rating directly determines how long the battery will last. So using 1.5AH battery will only drive half as many screws/bolts compared to a 3AH battery before the battery is dead but it will still work.
Question:	Amazon lists the torque at 300 ft lbs while the DeWalt site lists it at 400 ft lbs. Which is it
Answer:	I'm not going to bulls#!t anyone. I never used this product, BUT typically the max torque of Impact Wrenches is in reverse. So maybe it's 400 ft.-lbs. in reverse and 300 ft.-lbs. foward? I don't know.

Product description

The DEWALT DCF880HM2 20v MAX* Lithium Ion 1/2-inch Impact Wrench Kit features a compact (5. 70" front to back), lightweight (3. 4 lbs) design that fits into all kinds of tight areas. It has three LED lights with 20 second delay after trigger release, that helps to provide visibility without shadows. Also features a hog ring anvil to easily change sockets. Drive size = 1/2-inch square drive. The textured anti-slip comfort grip provides maximum comfort and control for the user. Powered by a XR Li-Ion battery with fuel gauge which provides 33% more capacity over standard packs. Applications include: Driving and removing fasteners in wood, metal or concrete/ Fastening and removing nuts and bolts/and Primarily for use with impact sockets . Includes: Fast Charger, DCB204 20V* MAX XR Premium Li-Ion Batteries (4. 0 Ah) and Kitbox. (*Maximum initial battery voltage - measured without a workload - is 20 volts. Nominal voltage is 18. ).

• Compact (5. 70" front to back), lightweight (3. 4 lbs) design fits into tight areas
• Three LED lights with 20 second delay after trigger release, provide visibility without shadows
• Hog ring anvil to easily change sockets
• XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs

User questions & answers

Question:	What is the torque output
Answer:	There are 2 versions of dewalt 1/2 drive impacts I think I read this model is about 200 or 210 ft lb at lowes. The bigger version I read was 680 ft lb but amazon says it is 700 ft lb.
Question:	is it comes with 2 battery yes
Answer:	yes it comes with 2 battery's great little gun . JimBo
Question:	Can this strong to work on a semi tire
Answer:	Hi there, I'm not sure about that, but, I've been using this on a 2001 Ford Expedition, and I only use the Mid-Level 2 (for power strength); and it takes away very easy the wheel-bolts. This unit comes with 3 Levels, so, that may give you a hint of how strong this guy is. I hope this may help. Thank you
Question:	I want the 1/2 " hog ring impact, tool only
Answer:	I have seen both the 1/2 inch impacts 20volt on Amazon, not sure wich one your looking for.If you go on the dewalt website they list alot of bare tools there.I found the part number on the one I wanted and then searched Amazon again and found it quickly.I love the new tools,battery life is amazing and the short bodied driver fits almost anywhere.

Product description

The DEWALT DCF890B 20V MAX* XR 3/8" Compact Impact Wrench (Baretool) features a DEWALT built brushless motor for increased efficiency and runtime. It is compact and ergonomic with only 5.5" head length and 2 lbs (tool only), and has a variable speed trigger which provides additional control. This Impact wrench offers 3 LEDs which illuminate your work area, along with a belt clip to keep your tool handy for additional ease of use. Torque = 150 lbs - Ft. This is a baretool item - battery sold separately. Backed by DEWALT's 3 year limited warranty. Includes: DCF890 - 20V MAX* XR 3/8" Compact Impact Wrench Tool, Belt Clip.

• DEWALT built brushless motor for increased efficiency and runtime
• Compact and ergonomic with only 5.5" head length and 2 lbs (tool only)
• Variable speed trigger for added control
• Power Tool Type : Cordless
• 3 LEDs provide visibility in darks areas of jobsite
• Battery & Charger Sold Separately

User questions & answers

Question:	Does dewalt make this brushless version with a 1/4 anvil
Answer:	I would say a legitimate torque that this tool can reach is 100ft.lbs. maybe 105-110 at a full charge... maybe
Question:	Is this impact made in the USA
Answer:	Yes
Question:	Does it come with battery & charger
Answer:	Like max fiveish pounds
Question:	Does this model have the pin anvil or hog ring anvil
Answer:	Hi! The GDR18V-1400B12 Impact Driver Kit comes with one 18V Lithium-ion 2.0 Ah SlimPack battery, model number BAT612. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product description

The DEWALT DCF894HB 20V MAX* XR ½ in. Mid-Range Cordless Impact Wrench with Hog Ring Anvil delivers up to 330 ft-lbs max of fastening torque and a lightweight, ergonomic design. This tool also features Precision Wrench Control, which helps to prevent overtightening in forward and fastener run-off in reverse. This Mid-Range Cordless Impact Wrench is ideal for grooved couplings, pipe flanges, wheel lugs, concrete anchor setting, and many other applications where a lot of torque is needed in a compact space. This is a bare tool; battery sold separately. 3 Year Limited Warranty, 1 Year Free Service Contract, 90 Day Money Back Guarantee.

• Up to 330 ft-lbs max of fastening torque at only 3.48Lbswhen fastener is loose to help prevent run-off
• Features precision wrench control. In forward the tool will pause before impacting to help prevent overtightening. In reverse the tool lowers speed when fastener is loose to help prevent run-off
• 3 mode settings to complete a variety of applications
• Dewalt-built Brushless motor for increased efficiency and runtime vs. Brushed DEWALT DCF894HB 20V max* XR 1/2 in. Mid-range cordless impact wrench with hog ring anvil (tool only)
• Variable speed trigger helps to provide speed control

User questions & answers

Question:	Is this powerful enough to remove wheel studs on a car
Answer:	There are some vehicle manufacturers the make the hub threaded and wheel studs are what you take off to remove tire. As long as someone didnt go 300lb gorilla torquing them it should do the job
Question:	viene con la batería
Answer:	No solo el taladro la batería y cargador se venden separados
Question:	Which one to get, this one with the hog ring or the other one with the detent ring? For ease of use
Answer:	I opted for the hog ring last year when I bought this, I figured it would be easier to use. However the rings wore out quickly and I got tired of buying new ones. I have since replaced the anvil with the detent one and no longer lose sockets by them getting stuck on fasteners or having the socket fall off and roll away. The new anvil (only) from Dewalt is 26 bucks, the whole detent impact is only 10 (at the time of this answer) higher than the hog ring one.
Question:	What is a good socket set for this
Answer:	There is this co.pany called sunnex tools, they have good socket sets, that will last long and won't brake your bank. I am an industrial mechanic, those are the best bang for your buck.

Product description

• Compact (5.70" front to back), lightweight (3.4 lbs) design fits into tight areas
• Three LED lights with 20 second delay after trigger release, provide visibility without shadows
• Hog ring anvil to easily change sockets
• Textured anti-slip comfort grip provides maximum comfort and control

User questions & answers

Question:	can i use the 5 ah
Answer:	Most likely it would. It didn't have any issues breaking spindle nuts for me.
Question:	Does it have more power than the newest snap on cordless 3/8 impact
Answer:	I don't own a harbor freight product so I wouldn't know.
Question:	Will a 20v Max 1.5 battery fit this impact
Answer:	Improper socket. I have never broke a impact socket in 30 years. Use 6 point sockets, 12 points are good for nothing.
Question:	Does anyone know if there is a brushless version of this impact wrench
Answer:	NO

Product features

Precision Wrench Control feature

The DEWALT 20V MAX Cordless Impact Wrench with Hog Ring Anvil is a mid-range cordless wrench that powers through even tough surface with its 330 ft-lbs max of fastening torque. The most important feature of the tool that makes it unique is its Precision Wrench Control that ensures you get the desired result. It prevents overtightening in forward direction and speeds up run-off in reverse.

Easy to Use

As the device is cordless, you will find it extremely easy to carry it from once to another without being restricted by the wire. As you are not controlled by the wire, you will be able to access even the difficult corners. As it is so lightweight and easy to use, you will get any job done that needs high amount of torque in tight spaces such as wheel lugs, pipe flanges, grooved couplings etc.

Product description

The DEWALT DCF889M2 20v MAX* Lithium Ion 1/2-inch Impact Wrench features 400 ft.-lbs of maximum torque to perform a wide range of heavy-duty fastening applications. The XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs. This unit has a variable speed trigger with electric brake that provides user improved control. Also, the LED light provides user greater visibility when working in dark environments. It is enhanced with a durable magnesium gear case and all metal transmission for extended durability. Drive size = 1/2" Square drive/Anvil type = Detent Pin. Applications include: Driving and removing fasteners in wood, metal or concrete along with fastening and removing nuts and bolts. Includes a Fast Charger, DCB204: 20V* MAX SR Premium Li-Ion Batteries (4. 0 Ah) and Kit Bag. (*Maximum initial battery voltage - measured without a workload - is 20 volts. Nominal voltage is 18. ) and it includes 2 batteries

• 400 feet pounds of maximum torque to perform a wide range of heavy duty fastening applications
• XR Li Ion batteries with fuel gauge provide 33 percent more capacity over standard packs
• Variable speed trigger with electric brake provides user improved control
• Anvil Type: Detent Pin. Impacts per minute is 0 2300

User questions & answers

Question:	Wnat is the backwards torque
Answer:	Same torque rating backwards and forward.
Question:	The wattage of the charger? 50W or 60W
Answer:	Neither. If you mean is the required input 50 Hertz or 60 Hertz--the answer is 60 Hertz.The given input specs are 120 volts x 1.5 amps = 180 wattsIf you want to know the charger output, that rating is measured in amps and it is 4.0 amps.If by some chance you really want to know how many watts the charger consumes, the formula is volts x amps=watts....so 120 volts x 1.5 amps = 180 watts
Question:	Could this be used for an oil change
Answer:	it would depend on what you are talking about. if you are considering using it to remove and install the drain nut i highly recommend that you stay with a trusty wrench, to tighten and loosen the drain nut.
Question:	Did the unit come with one or two Ion Batteries?. The page displays two baterries
Answer:	Two batteries. We love this tool.

Product description

The DEWALT DCF897B 20v MAX* XR High Torque 3/4" Impact Wrench w. Hog Ring Retention Pin Anvil -Baretool offers premium performance for fastening and breakaway; Up to 700 ft.lbs of max torque and 1200 ft.lbs of max breakaway torque. With best in class ergonomics for comfortable use, this Impact Wrench has a compact design of 8-13/16" in length and weighs only 7.2 lbs. It features multi-speed control for a variety of applications (0-400/ 1,200/ 1,900 RPM), with an efficient motor design that allows for optimum runtime and variable speed settings. It has a 3/4" hog ring with retention pin anvil, along with a LED light with 20 second delay for increased visibility in dark work areas. This is a baretool item, battery sold separately. Includes: DCF897 - 20v MAX* XR Brushless High Torque 3/4" Impact Wrench with Hog Ring Anvil - Tool.

• 700 ft.lbs of max torque and 1200 ft.lbs of max breakaway torque
• Compact design of 8-13/16" in length and weighs only 7.2 lbs
• 3/4" hog ring with retention pin anvil
• LED light with 20 second delay for increased visibility in dark work areas
• Baretool item / Battery sold separately
• Battery & Charger Sold Separately

User questions & answers

Question:	Is this a 3/4 drive tool, or 1/2? The description above shows 1/2, but the image shows 3/4 drive
Answer:	DCF897B DRIVE: 3/4" HOG RING RETENTION PIN ANVIL
Question:	Is this 3/4 inch drive
Answer:	Yes, the DF897B is a 3/4" Hog Ring Anvil Impact Wrench.
Question:	Is this made in the USA
Answer:	The label states made in the USA
Question:	So is this a 3/4 or 1/2 drive? Part number says 3/4, description says
Answer:	DCF897B is 3/4" HOG RING RETENTION PIN ANVIL

Product description

The DEWALT DCF880B 20-volt MAX Li-Ion 1/2-Inch Impact Wrench Kit with Detent Pin (Tool Only) is a compact tool that fits into tight areas. A part of the lightweight, yet powerful line of DEWALT 20-volt MAX products, this would be a great addition to any toolbox. Battery not included.

• Compact (5.70-Inch front to back), lightweight (3.4-Pound ) design fits into tight areas
• Three LED lights with 20 second delay after trigger release, provide visibility without shadows
• Textured anti-slip comfort grip provides maximum comfort and control
• Battery & Charger Sold Separately

User questions & answers

Question:	Can the impact feature be turned off and on (i.e. to be used as just a drill for use in fine cabinetry work
Answer:	No it can not. It has a 1/2 impact socket tip on it that isn't removable. This tool was strictly designed to be used with 1/2 sockets.
Question:	What’s the difference between an impact driver and an impact wrench? I see Dewalt has both
Answer:	Impact drivers are usually smaller (using 1/4" hex drive) for driving in smaller screws. Impact wrenches are larger and deliver more power, and are usually 3/8" square drive and larger. Impact wrenches are usually for loosening and fastening large nuts and bolts. They both operate in a similar manner- they use rotational hammering action to twist the fastener. Compared to a traditional drill or ratchet that applies continuous force, impact drivers and wrenches are able to exert much more force by "pulsing" the force in a twisting fashion, in several short, but powerful blows. This results in less reactionary torque (tool trying to pull out of your hands), less stripped screwheads and much higher power- useful for driving long, or stuck screws/bolts.
Question:	Anyone know the max torque for this one? I'm tryna decide which one to get
Answer:	DCF880 has a max torque rating of 150 ft-lbs according to Dewalt.
Question:	whats the difference between hog ring and detent pin
Answer:	The ring offers spring tension to sockets to retain it on the drive and the pin offers another means of retaining socket on drive by locking into the hole on drive side of sockets. The pin works great to keep impact swivel sockects from flying off. However, they are harder to remove from drive of impact. You actually have to push the pin down to remove socket. Unlike the retaining ring, you would simply pull off.

Product features

DEWALT DCF880B 20-volt Li-Ion 1/2-Inch Impact Wrench Kit with Detent Pin

Comfortable to grip with a compact and lightweight design to reach tight spaces and increase productivity.

About DEWALT

DEWALT is a leading manufacturer of industrial power tools and accessories, including corded and cordless drills, saws, hammers, grinders, routers, planers, plate joiners, sanders, lasers, generators, compressors, nailers, saw blades, metal and masonry drill bits, abrasives, screw driving accessories, and more. DEWALT tools can be found nationally and internationally wherever tools are sold. With more than 1,000 factory-owned and authorized locations, DEWALT has one of the most extensive service and repair networks in North America.

Product description

EXPAND YOUR SYSTEM with the 20V MAX XR 2-Tool Combo Kit including a 1/2 in. Mid-Range Impact Wrench and 3/8 in. Compact Impact Wrench. This kit also includes one 20V MAX XR 5Ah battery and an 8 Amp Fast Charger with 2X the charge rate (vs. DCB115).

• Premium XR 2-kit includes a DCF894 1/2 in. Mid-Range Impact Wrench and DCF890 3/8 in. Compact Impact Wrench
• DCF894: Up to 330 ft-lbs max of fastening torque and 600 ft-lbs of break away torque at only 3.48lbs
• DCF894: Compact and lightweight design for comfort when working in tight spaces
• DCF894: Prevent over-tightening and run-off with Precision Wrench Control
• DCF890: Compact and ergonomic with only 5.5" head length and 2 lbs (tool only)

User questions & answers

Question:	Do they make an adapter that will fit on my 1/2" impact wrench and take me down to a 3/8" drive that I can use with my bolt extractor kit
Answer:	There is not a 1/2 to 3/8th adapter for the impact wrench DCF894
Question:	Manejan sistema de escobillas o son de última tecnología que ya no las tienen
Answer:	Both the mid range impact wrench and the compact impact wrench have brushless motors.
Question:	What is the foot pound of toque
Answer:	The foot pound torque DCF894 330 ft-lbs and DCF890B 150 ft-lbs
Question:	Is it a hog ring or anvil
Answer:	Model DCF894 is a anvil

Product features

About Us

Raymond E. DEWALT followed in his father's steps, and worked in plants and construction after leaving school. In all fields of work he encountered the issue of high labour costs. To help reduce these costs, whenever possible he installed a machine to handle specific needs.

One fine day, M. DEWALT was hired to head a wood mill, manufacturing numerous products, from basic boxes to complete houses. The amount of work exceeded the company's capacity by far, but its owner could not afford to increase the headcount. The only solution was to ensure his men produced more work. M. DEWALT built a yoke, which he connected directly to a motor and a saw. He then fitted it onto a standard arm. The saw could be raised, lowered, moved forward and backward, and adapted to all types of angles. With this system, he could handle the same amount of work as four men, reducing labor costs beyond his wildest imagination.

Product description

The 7 Piece Deep Impact Socket Set 1/2 Drive offers a variety of impact sockets for any user need. The metric sockets set comes in a lockable stacking case for easy storage.

• Mechanic Socket Set is Designed with Heat treated CR-440 steel
• Impact Socket Set Features DirectTorque Technology allowing for greater contact with the flat surface area of fasteners
• Deep Impact Socket Set 1/2 Drive Comes with High Visibility Laser Etched Markings
• Includes a black oxide coating
• O-ring and retaining pin compatible
• Housed in a locking case that stacks with other like sets

User questions & answers

Question:	Are the sizes hard stamped and laser etched on impact sockets
Answer:	Stamped size identification.
Question:	Can these impact sockets be used to remove wheel lugs with air impact wrench
Answer:	Absolutely, I use the DEWALT DCF899P1 20V MAX XR Brushless High Torque 1/2" Impact Wrench and it works great
Question:	Whats the drive size
Answer:	1/2
Question:	is it made in china
Answer:	If you would read info by Dewalt you would find out. Their website says made in the USA from global materials.

Product description

This DEWALT 23 pc. combination impact socket set offers a variety of SAE and Metric sockets along with an extension, adapter and quick release ratchet. The 72 tooth count ratchet comes equipped with a quick release button to easily attach or remove a socket. These sockets have DirectTorque™ technology to help prevent rounding of fasteners and provide better grip. High visibility laser etched markings help locate the desired size socket.



DEWALT has always delivered GUARANTEED TOUGH products. DEWALT is dedicated to safety without compromising on performance or DEWALT GUARANTEED TOUGH durability. Our power drills and accessory products are engineered to move the industry forward, without the harmful gas emissions. We develop tools and batteries rooted in innovation to solve the challenges on the jobsite. April 2018 marked the 100th anniversary of our Product Service Division, and we’re gearing up for the next 100 years.

• 23 PIECE SOCKET SET: This DEWALT 23 pc. combination impact socket set offers a variety of SAE and Metric sockets along with an extension, adapter and quick release ratchet.
• DIRECTTORQUE TECHNOLOGY: These multi tool sockets have DirectTorque technology to help prevent rounding of fasteners and provide better grip. 72 tooth ratchet for access in tight spaces, and impact-ready with heat treated CR-440 steel.
• 1/2 IN. DRIVE 6 PT. IMPACT SOCKETS: SAE 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, Metric 13, 14, 15, 16, 17, 18, 19, 21, 22, 24; 1/2 in. Drive 5 in. Impact Extension, 1/2 in. Drive Drill Adapter, 1/2 in. Drive Quick Release Ratchet.
• DEWALT LIFETIME WARRANTY: Backed by the Full Lifetime Warranty with hassle free replacements. We stand behind our products 100%. If that doesn’t say tough, we don’t know what does.
• GUARANTEED TOUGH: From 1924 to today, DEWALT continues to design and optimize professional solutions- tools, accessories, and service- to ensure absolute confidence for the toughest jobsite conditions. WE are DEWALT, and we are GUARANTEED TOUGH.

User questions & answers

Question:	What is the torque specs for the wrench
Answer:	The DWMT74739 is a 1/2 in. Drive Quick Release Ratchet.
Question:	Is the ratchet 72 tooth like the chrome version? If not, how many teeth
Answer:	Yes, the ratchet included is equipped with 72-tooth gear system
Question:	What are the socket sizes in this set
Answer:	INCLUDES: 1/2 in Drive 6pt Impact Sockets: SAE 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, Metric 13, 14, 15, 16, 17, 18, 19, 21, 22, 24. (1) 1/2 in Drive 5 in Impact Extension, (1) 1/2 in Drive Drill Adapter, (1) 1/2 in Drive Quick Release Ratchet.
Question:	Whats the difference btween1/2 3/8? The handle? Which is good for general home use
Answer:	The other answers really don't address your question. Hint to others: if someone is asking a question like this, they probably aren't familiar with jargon like "drive size." The 1/2" vs 3/8" refers to the size of the square lug at the end of the ratchet that you fasten the sockets to. 3/8" sockets will have a 3/8" opening that goes onto the rotating lug of the ratchet. Obviously bigger is more sturdy, but for general home use 3/8" would be plenty adequate. They even make 1/4" drive that's lighter duty, but 3/8" is a popular size and good for overall use. 1/2" would generally be for heavier duty like general automotive bolts. 3/4" and 1" drive sizes get you into heavier automotive (trucks and bigger) and industrial applications.

Product description

From the Manufacturer

Dewalt DW22812 10 Piece 1/2-Inch Drive Socket Set includes the eight most common size sockets and two 1/4-inch adapters. The pivoting organization pins allow for customized application based storage, and the space inside the case allows for storage of a common 10-inch hand wrench (not included). These sockets are made of high impact resistant material to give overall durability to the case, and have recessed corners that distribute torque across flats, promoting life of the socket. These sockets have a small foot print and are easy to carry. The sockets feature large laser etched markings that make each socket easily identifiable, and are thinner than pneumatic wrench sockets for tough to access areas. Includes: 7/16-inch Socket; 1/2-inch Socket; 9/16-inch Socket; 5/8-inch Socket; 11/16-inch Socket; 3/4-inch Socket; 13/16-inch Socket; 7/8-inch Socket; DW2547IR 1/4-inch hex to 1/2-inch square impact ready socket adapter; Carrying case.

• Pivoting organization pins allow for customized application-based storage
• Small footprint and easy to carry. Includes 8 sockets and 2 adapters.
• Designed for use in both corded and cordless impact drivers and wrenches
• Recessed corners distribute torque across flats, promoting life of the socket
• Large laser-etched markings make each socket easily identifiable

User questions & answers

Question:	is this size appropriate to take lugs off a standard size tire
Answer:	I have not tried them on spark plugs. The sockets are 1 mil (3/8 in.) shorter than the spark plug socket, but they should work.
Question:	Are these magnetic
Answer:	It has a 1/4 drive metric deep socket # 10.
Question:	Just purchased the dcf88oh with hog ring. will these fit
Answer:	No sorry it doesn't.
Question:	How do you release socket from the adapter
Answer:	Latch to latch 13" L x 8 " W x 21/4 " thick.

Product description

The DEWALT DCF890M2 20V MAX* XR 3/8" Compact Impact Wrench Kit features a DEWALT built brushless motor for increased efficiency and runtime. It is compact and ergonomic with only 5.5" head length and 2 lbs (tool only), and has a variable speed trigger which provides additional control. This Impact wrench offers 3 LEDs which illuminate your work area, along with a belt clip to keep your tool handy for additional ease of use. Backed by DEWALT's 3 year limited warranty. Includes: DCF890 - 20V MAX* XR 3/8" Compact Impact Wrench Tool, DCB204 - 20V MAX* XR Lith Ion Batteries, DCB115 - Fast Charger, Belt Clip, Tool Bag.

• DEWALT built brushless motor for increased efficiency and runtime
• Compact and ergonomic with only 5.5" head length and 2 lbs (tool only)
• Variable speed trigger for added control
• Compact and ergonomic
• 3 LEDs provide visibility in darks areas of jobsite