8 best dewalt half inch impact wrench

Product description

The DEWALT DCF880HM2 20v MAX* Lithium Ion 1/2-inch Impact Wrench Kit features a compact (5. 70" front to back), lightweight (3. 4 lbs) design that fits into all kinds of tight areas. It has three LED lights with 20 second delay after trigger release, that helps to provide visibility without shadows. Also features a hog ring anvil to easily change sockets. Drive size = 1/2-inch square drive. The textured anti-slip comfort grip provides maximum comfort and control for the user. Powered by a XR Li-Ion battery with fuel gauge which provides 33% more capacity over standard packs. Applications include: Driving and removing fasteners in wood, metal or concrete/ Fastening and removing nuts and bolts/and Primarily for use with impact sockets . Includes: Fast Charger, DCB204 20V* MAX XR Premium Li-Ion Batteries (4. 0 Ah) and Kitbox. (*Maximum initial battery voltage - measured without a workload - is 20 volts. Nominal voltage is 18. ).

• Compact (5. 70" front to back), lightweight (3. 4 lbs) design fits into tight areas
• Three LED lights with 20 second delay after trigger release, provide visibility without shadows
• Hog ring anvil to easily change sockets
• XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs

User questions & answers

Question:	What is the torque output
Answer:	There are 2 versions of dewalt 1/2 drive impacts I think I read this model is about 200 or 210 ft lb at lowes. The bigger version I read was 680 ft lb but amazon says it is 700 ft lb.
Question:	is it comes with 2 battery yes
Answer:	yes it comes with 2 battery's great little gun . JimBo
Question:	Can this strong to work on a semi tire
Answer:	Hi there, I'm not sure about that, but, I've been using this on a 2001 Ford Expedition, and I only use the Mid-Level 2 (for power strength); and it takes away very easy the wheel-bolts. This unit comes with 3 Levels, so, that may give you a hint of how strong this guy is. I hope this may help. Thank you
Question:	I want the 1/2 " hog ring impact, tool only
Answer:	I have seen both the 1/2 inch impacts 20volt on Amazon, not sure wich one your looking for.If you go on the dewalt website they list alot of bare tools there.I found the part number on the one I wanted and then searched Amazon again and found it quickly.I love the new tools,battery life is amazing and the short bodied driver fits almost anywhere.

Product description

The DEWALT DCF899M1 20v MAX XR Brushless High Torque 1/2" Impact Wrench with Dentent Pin Anvil (4.0 Ah) features up to 700 ftpounds of MAX Torque and 1200 ftpounds of MAX breakaway torque. This tool has a compact design of 8 13/16" in length and weighs only 7.2pounds for ease of use. It also has multi speed control for a variety of applications (0 400/1,200/1,900 RPM). A heavy duty 1/2" Anvil with detent pin. An LED light with 20 second delay allows for increased visibility in dark or tight workspaces. Includes: DCF899 20v MAX XR Brushless High Torque 1/2" Impact Wrench with Dentent Pin Anvil, 20V XR Lith Ion battery (4.0 Ah), Fast Charger, Tool bag.

• Compact design and lightweight at only 7.2 pounds
• Heavy Duty 1/2 inch Anvil with detent pin
• Up to 700 feet pounds of MAX Torque
• LED light with 20 second delay for increased visibility
• Maximum Speed (RPM):1900

User questions & answers

Question:	using 1 of the 3 speeds ,is there anyway to set the torque to 100 ft-lbs
Answer:	The manual states that the maximum torque values for each speed are 100/300/700. So if you set it to Speed 1 then the maximum torque it will deliver is 100 ft-lbs.
Question:	Dofference between dcf899m1 and dcf899b
Answer:	Dewalt codes are as follows B = bare tool. No battery. C = Compact (1.5Ah) battery. D = 2Ah compact battery. L = 3Ah battery. M = 4Ah battery. P = 5Ah battery. T = 6Ah Flexvolt battery. X = 9Ah Flexvolt battery. DCF899 = Detent pin version. DCF899H = Hog ring version. So, DCF899M1 is detent pin with 1 4Ah battery. If you see something like DCF899HP2, that means hog ring version with 2 5Ah battery. Otherwise, whether it's DCF899B or DCF899M1 or DCF899P1, the tool itself is EXACTLY the same.
Question:	Is this a kit, or just the lone drill
Answer:	DCF899B is the DCF899 impact with a detent anvil sold as a (B) bare tool. DCF899HB is the DCF899H impact with a (H) hog ring anvil* sold as a (B) bare tool. DCF899M1 is the DCF899 impact with detent anvil sold as a kit with charger, one (1) 4Ah battery, and a bag. DCF899P1 is the DCF899 impact with detent anvil sold as a kit with charger, one (1) 5Ah battery, and a bag. DCF899P2 is the DCF899 impact with detent anvil sold as a kit with charger, two (2) 5Ah batteries, and a bag. DCF899HP2 is the DCF899H impact with hog ring anvil* sold as a kit with charger, two (2) 5Ah batteries, and a bag *Difference between detent and hog ring: Detent holds socket more securely but must be put on so pin lines up with hole in impact socket & will need a small screwdriver or the like to release. Hog ring allows one to put on and pull off impact sockets by hand, though usually pretty difficult at first until broken in. Of course you should only use impact sockets/extensions If you put a hand socket (usually chrome) on a hog ring it will lock on and you will need a tool to get it off because the indentations are different. That's also a good way to break the hog ring, but if that happens they are cheap and easy to replace. Detents are usually more suited for situations where socket changes are infrequent like in a factory setting & hog rings for where frequent changes are needed like automotive work.
Question:	My boyfriend mentioned briefly he wanted a dewalt gun that apparently is so strong that he can change tires within minutes with it. could this be it
Answer:	Yes. This could be it. This is currently Dewalts newest and strongest cordless impact wrench. You might want to look for the one that comes with batteries and a charger if he doesn't have that already. Be mindful that this model comes with two variations: hog ring and detent anvil. Detent anvil holds the socket tighter but uses a tool (which is probably included)to change the sockets while hog ring holds the socket on with a split washer but doesn't require a tool. Great tool though with either option.

Product features

DEWALT DCF899M1 20V MAX XR Brushless High Torque Impact Wrench with Dentent Pin Anvil

The DCF899B 20V MAX* XR Brushless High Torque 1/2" Impact Wrench w. Detent Pin Anvil is powerful and versatile for fastening various applications. Designed for comfort, speed control, and working in dark spaces.

Features:

• Up to 700 ft-lbs of max torque and 1200 ft-lbs of max breakaway torque
• Compact design of 8-13/16" in length
• Multi-speed control for a variety of applications (0-400/ 1,200/ 1,900 RPM)
• 1/2" Anvil with detent pin (also available with hog ring)
• LED light with 20-second delay for increased visibility

Product description

The DEWALT DCF889M2 20v MAX* Lithium Ion 1/2-inch Impact Wrench features 400 ft.-lbs of maximum torque to perform a wide range of heavy-duty fastening applications. The XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs. This unit has a variable speed trigger with electric brake that provides user improved control. Also, the LED light provides user greater visibility when working in dark environments. It is enhanced with a durable magnesium gear case and all metal transmission for extended durability. Drive size = 1/2" Square drive/Anvil type = Detent Pin. Applications include: Driving and removing fasteners in wood, metal or concrete along with fastening and removing nuts and bolts. Includes a Fast Charger, DCB204: 20V* MAX SR Premium Li-Ion Batteries (4. 0 Ah) and Kit Bag. (*Maximum initial battery voltage - measured without a workload - is 20 volts. Nominal voltage is 18. ) and it includes 2 batteries

• 400 feet pounds of maximum torque to perform a wide range of heavy duty fastening applications
• XR Li Ion batteries with fuel gauge provide 33 percent more capacity over standard packs
• Variable speed trigger with electric brake provides user improved control
• Anvil Type: Detent Pin. Impacts per minute is 0 2300

User questions & answers

Question:	Wnat is the backwards torque
Answer:	Same torque rating backwards and forward.
Question:	The wattage of the charger? 50W or 60W
Answer:	Neither. If you mean is the required input 50 Hertz or 60 Hertz--the answer is 60 Hertz.The given input specs are 120 volts x 1.5 amps = 180 wattsIf you want to know the charger output, that rating is measured in amps and it is 4.0 amps.If by some chance you really want to know how many watts the charger consumes, the formula is volts x amps=watts....so 120 volts x 1.5 amps = 180 watts
Question:	Could this be used for an oil change
Answer:	it would depend on what you are talking about. if you are considering using it to remove and install the drain nut i highly recommend that you stay with a trusty wrench, to tighten and loosen the drain nut.
Question:	Did the unit come with one or two Ion Batteries?. The page displays two baterries
Answer:	Two batteries. We love this tool.

Product description

The DEWALT 20V Max 1/2 Inch High Torque Impact Wrenches are designed for mechanical contractors, plumbers, automotive users, maintenance and repair professionals and remodelers. They are designed for professionals who demand a tool for difficult fastening applications, such as driving and removing fasteners, nuts and bolts in wood, metal and concrete. These impact wrenches deliver the power, durability and control they need to tackle the toughest tasks on the jobsite. They have 400 Feet/Pound of torque to perform a wide range of heavy duty fastening applications.

• 400-Feet Pound of maximum torque to perform a wide range of heavy-duty fastening applications
• Ergonomic handle provides user superior comfort and control
• Variable speed trigger with electric brake provides user improved control
• Durable magnesium gear case and all metal transmission for extended durability
• Bare tool, batteries and charger sold separately

User questions & answers

Question:	Is there a 18volt tool similar in torque value in the dewalt line
Answer:	no stay with 20v
Question:	How easy is it to remove a socket? Do you have to press the pin, or can you just pull it off? The hog ring version doesn't seem to be available
Answer:	I honestly think the hog ring is a solution to a problem that doesn't exist. Detente is better. Not hard to use at all. It won't wear out. The hog ring will be good for about a year.
Question:	can you use the battery 20v max lithium ion 1.5ah with this tool
Answer:	Yes 20V is all that matters. You can use any 20V Dewalt battery with any 20V Dewalt tool. Still the amp rating directly determines how long the battery will last. So using 1.5AH battery will only drive half as many screws/bolts compared to a 3AH battery before the battery is dead but it will still work.
Question:	Amazon lists the torque at 300 ft lbs while the DeWalt site lists it at 400 ft lbs. Which is it
Answer:	I'm not going to bulls#!t anyone. I never used this product, BUT typically the max torque of Impact Wrenches is in reverse. So maybe it's 400 ft.-lbs. in reverse and 300 ft.-lbs. foward? I don't know.

Product description

INCLUDES: DCF899HB - 20V MAX* XR Brushless High Torque 1/2" Impact Wrench with Hog Ring Anvil (Tool Only)Up to 700 ft-lbs of max torque and 1200 ft-lbs of max breakaway torqueMax Torque (ft/lbs.): 700DEWALT 20 V MAX* XR brushless high torque 1/2 In. impact wrench w. Hog ring anvil (Bare). Compact design of 8-13/16 In. in length. LED light with 20 second delay for increased visibility.

• This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box

User questions & answers

Question:	What is the switch at the bottom of the handle
Answer:	I'm not sure if they are the same size as the beats wireless ear pads. If there aren't any available for your headphones you could try modifying them to fit by taking the pads off the base and glue them onto ur base for ur headphones.
Question:	What is the ah of the battery?does it come with a charger?what is the power rating
Answer:	They have been fitted for quite a while now and the sound is just as good as before.
Question:	Is this item dcf899hb or dcf899b? conflicting info on the page
Answer:	Yes double sided tape comes in the package.
Question:	How many ft. Lb have this tool
Answer:	I have the grind and they fit perfect, but these seem to be for the uproar https://www.amazon.com/Cushion-Earmuffs-Replacement-Skullcandy-Wireless/dp/B07P68JXF6

Product description

The DEWALT DCF894HB 20V MAX* XR ½ in. Mid-Range Cordless Impact Wrench with Hog Ring Anvil delivers up to 330 ft-lbs max of fastening torque and a lightweight, ergonomic design. This tool also features Precision Wrench Control, which helps to prevent overtightening in forward and fastener run-off in reverse. This Mid-Range Cordless Impact Wrench is ideal for grooved couplings, pipe flanges, wheel lugs, concrete anchor setting, and many other applications where a lot of torque is needed in a compact space. This is a bare tool; battery sold separately. 3 Year Limited Warranty, 1 Year Free Service Contract, 90 Day Money Back Guarantee.

• Up to 330 ft-lbs max of fastening torque at only 3.48Lbswhen fastener is loose to help prevent run-off
• Features precision wrench control. In forward the tool will pause before impacting to help prevent overtightening. In reverse the tool lowers speed when fastener is loose to help prevent run-off
• 3 mode settings to complete a variety of applications
• Dewalt-built Brushless motor for increased efficiency and runtime vs. Brushed DEWALT DCF894HB 20V max* XR 1/2 in. Mid-range cordless impact wrench with hog ring anvil (tool only)
• Variable speed trigger helps to provide speed control

User questions & answers

Question:	Is this powerful enough to remove wheel studs on a car
Answer:	There are some vehicle manufacturers the make the hub threaded and wheel studs are what you take off to remove tire. As long as someone didnt go 300lb gorilla torquing them it should do the job
Question:	viene con la batería
Answer:	No solo el taladro la batería y cargador se venden separados
Question:	Which one to get, this one with the hog ring or the other one with the detent ring? For ease of use
Answer:	I opted for the hog ring last year when I bought this, I figured it would be easier to use. However the rings wore out quickly and I got tired of buying new ones. I have since replaced the anvil with the detent one and no longer lose sockets by them getting stuck on fasteners or having the socket fall off and roll away. The new anvil (only) from Dewalt is 26 bucks, the whole detent impact is only 10 (at the time of this answer) higher than the hog ring one.
Question:	What is a good socket set for this
Answer:	There is this co.pany called sunnex tools, they have good socket sets, that will last long and won't brake your bank. I am an industrial mechanic, those are the best bang for your buck.

Product description

The DEWALT DCF894P2 20V MAX* XR ½ in. Mid-Range Cordless Impact Wrench with Detent Pin Anvil delivers up to 330 ft-lbs max of fastening torque and a lightweight, ergonomic design. This tool also features Precision Wrench Control, which helps to prevent overtightening in forward and fastener run-off in reverse. This Mid-Range Cordless Impact Wrench is ideal for grooved couplings, pipe flanges, wheel lugs, concrete anchor setting, and many other applications where a lot of torque is needed in a compact space.

• Up to 330 ft-lbs max of fastening torque at only 3.48lbs
• Features precision wrench control. In forward, the tool will pause before impacting to help prevent overtightening. In reverse, the tool lowers speed when fastener is loose to help prevent run-off
• 3 mode settings to complete a variety of applications
• Dewalt-built Brushless motor for increased efficiency and runtime vs. Brushed DEWALT DCF894P2 20V max* XR 1/2 in. Mid-range cordless impact wrench with detent pin anvil kit
• Variable speed trigger helps to provide speed control. Impacts/Minute: 0-3100 IPM

User questions & answers

Question:	Hi good night! comes with 2 batteries and charger
Answer:	Great saw. Not a toy like the 18 volt ones. Definitely a great tool for the quiver. The battery does run down pretty fast. If you are framing and ripping all day long you will need three batteries and two chargers. I'm not sure about the 9 amp hr battery. Perhaps one of each will be enough or 2 9s would be the answer. My remodeling co is doing fine with one grinder, one saw and two 6 amp hr batteries. Don't even stock my corded saw in the truck any more.
Question:	interchangeable battery with other dewalt products
Answer:	made in china
Question:	Can you adjust the torque on this? Is this adjustable torque
Answer:	I love all my DeWalt Tools: drills, saws, and nailers. But, if you want a fantastic saw with the blade on the left without compromising on power and accuracy on your cuts, check out DeWalt's "wormdrive" saw. It's very powerful, accurate, and smooth cutting. You can easily keep your cut line in view throughout each cut. For that power it does require the cord. You have to decide what you want to trade off on; power or convenience of cordless. On a side note, Skilsaw makes a great lightweight magnesium high quality worm drive saw with plenty of power. It costs a little more than the deWalt. Please note I have not owned or used the Skilsaw, but it has a diehard following of contractors and framers.
Question:	What all does this kit come with
Answer:	Pen Name answered the best. This is most certainly a right hand saw-a two hand saw like any corded right blade sidewinder. I grew up working in construction on the west coast doing framing, trim work but mostly siding. We used the right side blade circular saws for everything. For siding we used them for ripping, some crosscut and general cutouts around windows and doors. I could rip a 16 foot piece of siding from end to end without looking at the material other than to start the rip. You just use your left hand holding the base plate and your finger against the material as a guide. You can't do that with a left side blade saw. Since then I have used cordless left side circular saws for more than 20 years. I'm used to them and prefer them but they are mostly a one hand saw. This 7 1/4" saw is just a cordless version of the corded right side sidewinder. And Dewalt makes a left side blade circular saw that is basically a cordless worm drive if you need that bid of a saw to have the blade on the left side.

Product description

The DEWALT DCF880B 20-volt MAX Li-Ion 1/2-Inch Impact Wrench Kit with Detent Pin (Tool Only) is a compact tool that fits into tight areas. A part of the lightweight, yet powerful line of DEWALT 20-volt MAX products, this would be a great addition to any toolbox. Battery not included.

• Compact (5.70-Inch front to back), lightweight (3.4-Pound ) design fits into tight areas
• Three LED lights with 20 second delay after trigger release, provide visibility without shadows
• Textured anti-slip comfort grip provides maximum comfort and control
• Battery & Charger Sold Separately

User questions & answers

Question:	Can the impact feature be turned off and on (i.e. to be used as just a drill for use in fine cabinetry work
Answer:	No it can not. It has a 1/2 impact socket tip on it that isn't removable. This tool was strictly designed to be used with 1/2 sockets.
Question:	What’s the difference between an impact driver and an impact wrench? I see Dewalt has both
Answer:	Impact drivers are usually smaller (using 1/4" hex drive) for driving in smaller screws. Impact wrenches are larger and deliver more power, and are usually 3/8" square drive and larger. Impact wrenches are usually for loosening and fastening large nuts and bolts. They both operate in a similar manner- they use rotational hammering action to twist the fastener. Compared to a traditional drill or ratchet that applies continuous force, impact drivers and wrenches are able to exert much more force by "pulsing" the force in a twisting fashion, in several short, but powerful blows. This results in less reactionary torque (tool trying to pull out of your hands), less stripped screwheads and much higher power- useful for driving long, or stuck screws/bolts.
Question:	Anyone know the max torque for this one? I'm tryna decide which one to get
Answer:	DCF880 has a max torque rating of 150 ft-lbs according to Dewalt.
Question:	whats the difference between hog ring and detent pin
Answer:	The ring offers spring tension to sockets to retain it on the drive and the pin offers another means of retaining socket on drive by locking into the hole on drive side of sockets. The pin works great to keep impact swivel sockects from flying off. However, they are harder to remove from drive of impact. You actually have to push the pin down to remove socket. Unlike the retaining ring, you would simply pull off.

Product features

DEWALT DCF880B 20-volt Li-Ion 1/2-Inch Impact Wrench Kit with Detent Pin

Comfortable to grip with a compact and lightweight design to reach tight spaces and increase productivity.

About DEWALT

DEWALT is a leading manufacturer of industrial power tools and accessories, including corded and cordless drills, saws, hammers, grinders, routers, planers, plate joiners, sanders, lasers, generators, compressors, nailers, saw blades, metal and masonry drill bits, abrasives, screw driving accessories, and more. DEWALT tools can be found nationally and internationally wherever tools are sold. With more than 1,000 factory-owned and authorized locations, DEWALT has one of the most extensive service and repair networks in North America.