11 best bench polishers

Product description

POWERTEC Bench Buffer features powerful ½ HP motor for quick and efficient smoothing and polishing of metal and other materials. Cast iron base reduced vibration. Specifications- Motor: 120V, 60 Hz, 4A. No Load Speed: 3450 RPM. Max. Buffing Wheel Diameter: 6-Inch. Arbor Size: ½-Inch.

• INCLUDES: 6" Bench Buffer Machine
• FUNCTION: An easy-to-use buffing station designed for a variety of buffing and polishing projects
• FEATURES: Dual end wheels for simultaneous polishing, a convenient off/on switch and extra long ball bearing supported machine shafts
• HEAVY DUTY BUILD: This benchtop buffer polisher was made with a cast iron base providing a weighted and stabilized platform for reduced vibration, while also eliminating potential damage often caused by vibrational buffering
• POWER BUFFER SPECS: 6" buffing wheel diameter, ½ horsepower induction motor, 120V, 60 Hz 3450 RPM

User questions & answers

Question:	Can it buff wood
Answer:	You can use it to buff wood if you know what you're doing. You need the correct compound and correct buffing wheel, plus a gentle hand. Part of the problem of buffing wood on this machine, is that the speed is too fast, so you run the risk of scorching the wood, especially if you apply too much pressure. It is preferable to buff wood on a slower machine, i.e. 1750 rpm or slower.
Question:	Can this polish rocks and fossils
Answer:	It could if you had a way of holding whatever you want to polish. The buffing wheels weren’t up to standard and the polishing compounds were dried out. The machine itself was fine.
Question:	how do you clean the buffing wheels pads
Answer:	If you have wool buffing wheels, they can be cleaned using the AES cleaning tool. You can find it here on Amazon.
Question:	Im restoring a ww1 gewehr 98, the bolt assembly, receiver and a few other parts are supposed to be polished and reflective. Would thisnwork well for t
Answer:	Yes but you would want to order a different stiffness buffing wheel and polishing compound.

Product features

6” Bench Buffer by POWERTEC

The POWERTEC BF600 is a dual end buffing machine designed for a variety of projects that require a smooth and polished surface. It’s intended for an assortment of materials, including metal, aluminum, chrome, plastic and other materials.

Heavy Duty Build and Performance

Our benchtop buffer was constructed with a cast iron base that not only gives this machine a sturdy and grounded foundation, but it’s designed to reduce vibration while in use. This key feature also helps eliminate potential damage to your work area or stock, often caused by vibrational buffering.

In addition to a solid build, this tool is equipped with extra long, ball bearing supported precision machine shafts for highly durable performance.

Product description

The heavy-duty one-horsepower 8-inch variable speed industrial bench buffer is engineered with a full casted body and loaded with safety innovations. The exclusive motor stop will reduce RPM speed from 3, 600 to 0 in less than 20-seconds bringing the buffing wheel to a complete stop.

• Massive cast iron body; variable speed provides wide range of RPM's
• Totally enclosed pre-lubricated ball bearings
• CSA/cuts: following strict guidelines and electrical requirements, this Jet industrial buffer is CSA/cuts certified
• Brake Resistor added for Rapid wheel stoppage
• Rubber mounts prevent movement

User questions & answers

Question:	Can you reverse the rotation
Answer:	Mine works great.
Question:	What voltage and phase is this unit? I didn't see it specified anywhere
Answer:	It depends what you are buffing for type of wheel but the main thing is keep it 6" or smaller. This is not a powerful buffer and it is easy to stop (over load). The larger the wheel the more torque on the motor...
Question:	Vfds do reduce the hp. i'm curious as to how low a speed someone has run this and how well did it do? anyone run one at say 800 rpm or lower
Answer:	3/4
Question:	What are the rpm's from low to high speed. I need something in the 1000 to 1200 rpm
Answer:	3450 as the label on the front says

• Adjustable Speed - This 110V jewelry buffer polisher has a 350W powerful motor that starts up quickly and can adjust speed up to 10,000 rpm, 0.6-6.5mm flexible shaft connector chuck can meet your different speed needs.
• Equipped with Two Wheel - Package includes a grit wheel and a fiber wheel. The two tapered spindles attach to the 1/4" motor shafts and suitable for muslin or buffing / polishing / grinding. Cutting wheels up to 4" in diameter.
• Multi-function Flex shaft - The flex shaft with 4mm stainless steel handle can be used with a variety of grinding discs, cutting wheel , brush head, carving, drilling, polishing, milling, grind-milling, cleaning, disgusting, etc.
• NOTE: The flex-shaft is recommended to install on the right side of the machine.The flexshaft should not be severely bent or twisted, otherwise the flex-shaft core is easily damaged.
• Wide Application: Suitable for grinding jade, wood, amber, beeswax, agate, denture, jewelry, stone carving, wood carving, gold, handicraft carving, with a variety of polishing oars for convenience.

Product features

Specifications:

Voltage: 110V

Power: 350W

Speed: 0-10000rpm

Wheel material: white steel grit and fiber

Wheel diameter: 7.5cm/2.76inch

Wheel thickness: 20mm

Product description

Remember when you spent all that money replacing dull rusty tools? From deburring ragged edges to cleaning objects to sharpening blades, the WEN 6-inch Bench Grinder is the ideal companion for any workshop. These machines allow for simple resuscitation of dull blades, scissors, screwdrivers, and more. Compact yet powerful, the WEN 6-Inch Bench Grinder provides reliability even in the face of the most difficult tasks. Our package includes two 6-inch by 3/4-inch wheels: a 60-grit wheel for material removal and general purpose grinding and a coarse 36-grit wheel for faster material removal. With our quiet 2.1 amp motor, expect quick startups, smooth performance and steady speeds of 3450 RPM. This fast speed is ideal for deburring unwanted edges and rust removal. Built with you in mind, our design makes wheel guard removal simple for easy wheel changes. The included eye guards can adjust to prevent them from interfering with your project. Also, don't forget about the flexible work light helping to illuminate your grinding for an increase in accuracy and precision. Of course, as with all WEN Products, our 6-Inch Bench Grinder is covered with a two-year warranty, a friendly and knowledgeable customer service hotline and a national service network. No need to waste anymore money on new tools. The WEN 6-Inch Bench Grinder will save you money by leaving all of your tools as sharp and clean as the day you bought them. Remember when your blades could actually cut through something other than butter? Remember WEN.

• 2.1-Amp motor
• 3450 RPM at no load
• 6 in. by 3/4 in. wheels, 1/2 in. arbor size
• Lightweight design weighs in at 16 lb.Lamp:120V, 40W (Bulb not included)
• Worklight for maximum precision and visibility

User questions & answers

Question:	Will this grinder work for making knives
Answer:	If you are serious about making knives, I would get heavier and mote powerful.
Question:	How do you secure it to the workbench
Answer:	2 holes at the bottom for bolts to secure to a bench. Place Bench Grinder on workbench, use holes as a template and mark with pen the 2 positions for the bolts. Remove Grinder, drill holes and secure with bolts, washers and nuts. Ten minutes.
Question:	How hard is it to put a polishing wheel on? And how good does it do? I'm doing it for restoring straight razors
Answer:	Polishing wheel can be installed easily. This particular model will serve you well as the speed is not high but will polish without damage to mayerila or wheel.
Question:	does it come with wheels
Answer:	Grinding wheels yes it comes with 2. 1 @ Coarse (36 grit) AND 1 @ General Purpose (60 Grit) the higher the grit the lower roughness.

Product features

Let the Sparks Fly

Remember when you spent all that money replacing dull rusty tools? From deburring ragged edges to cleaning objects to sharpening blades, the WEN 6-inch Bench Grinder is the ideal companion for any workshop. This package includes two 6-inch by 3/4-inch wheels: a 60-grit wheel for general purpose grinding and a coarse 36-grit wheel for faster material removal. With a quiet 2.1 amp motor, expect quick startups, smooth performance and steady speeds of 3450 RPM. Built with you in mind, the design makes wheel guard removal simple for easy wheel changes. And of course, as with all WEN Products, our 6-Inch Bench Grinder is covered by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to ensure you remember WEN.

Sturdy Base

Our heavy duty base reduces wobbling during operation and ensures safe mounting.

Flexible Work Light

A flexible work light illuminates the work space, promoting accurate sharpening.

Two Wheel Grits

Use the 60-grit wheel for general purpose grinding and the 36-grit wheel for faster material removal.

Protective Eye Guards

Eye guards provide vital protection from sparks and debris for safe operation.

WEN Cast Iron Bench Grinder Stand Available

As all woodworkers know, a bench grinder on a normal work surface often times jostles and skews the other items in a work area due to heavy vibrations created by the grinder. The WEN Bench Grinder Pedestal Stand (sold separately) resolves this issue by providing an independent surface to attach your grinder. The heavy cast iron and steel design limits vibration while providing a sturdy 31.5-inch pedestal for your grinder to rest on. The stand includes a water pot for quenching workpieces, a reliable three-legged design with bolt holes for fastening your stand to the floor and a 9.9-by-12.4-inch cast-iron top with slots and holes for securely mounting your bench grinder.

Product description

*COLOR MAY VARY

• 8" LONG SHAFTS 1HP H D TOP BENCH BUFFER POLISHER GRINDER CLEANER BENCH-TOP#007/14

User questions & answers

Question:	shaft diameter
Answer:	6"
Question:	What is the RPM
Answer:	We just read the box it says it takes the adhesive pads. Hope this helps!Have An Awesome Day!Sincerely,Lauri

• 💖 The latest third-generation TM-2 mini table saw machine with a larger operating platform and better accessories than the market. Lapidary Saw comes with a Water reservoir works better for polishing, cutting, grinding, carving, of jewelry, rock, aluminum, chrome, precious metal, jade, wood, plastic, model project.
• 💖 Mini bench buffer grinder has a detachable, flexible 42.5-inch shaft and angle adjustable ruler, suitable for various size cutting. Lapidary equipment is very flexible and practical for DIY enthusiasts due to the precision maneuverability.
• 💖 Highly effective rock saw with 0-10000 RPM possible, you can easily control the variable speed with the front dial as needed. comes with two 4-1/4 inches buffing wheels(can be used with wheels up to 6 inches in diameter) and 2 blades that can cut 30mm objects. And threaded mandrels help you easily replace the buffing wheels as needed.
• 💖 This lapidary polishing machine using a 110 Volt, 200 power motor, no loss of speed or quality. You can use 2 different types of grit at the same time. Buffer smooth and quiet with a blade guard to block dust and protect the eyes. A water bottle with a pipe can keep it in wet cutting when you are cutting a rock.
• 💖 The whole rock polisher machine measures 10.4” X 8.7” X 5.3” ( 26 cmX22 cm X 14 cm), and it weighs 15.4 pounds. Need to assemble it into a whole machine by watching a video on the product page. If there are any questions about the products, please contact us directly we will try our best to solve it for you.

User questions & answers

Question:	Does the take see area have water drip
Answer:	The one I bought came with an American style plug. I really should know what that voltage is, but I'm ignorant.
Question:	what kind of coolant does it use for the saw
Answer:	Yes, if you choose “ Soy milk maker and tofu kit” on the selection.
Question:	Where do I get replacement wood cutting blades
Answer:	The outside of this soy milk maker is about 80% stainless steel. The inside is made by almost 95% of stainless steel except the thick plastic top. However, there’s a sensor to prevent the boiled milk from flowing into the top plastic portion. But I’m not quite sure about that because I can still find some grounded soy around the plastic top when cleaning. It’d be trouble free if they could make that top inside stainless steel.

Product features

Upgraded Gem Jewelry Polishing Grinding Machine, Mini Table Rock Saw Lapidary Polisher Bench Buffer Machine

This is a high-quality polishing and buffing machine:

• The generic polishing machine has variable speeds from 0-10000 Revolutions Per Minute
• Bench Grinder with Long Shaft of 100mm and large benchtop for easy operation.
• A ruler for angel change, help you buff and grind with precision
• 2 Wheel Buffer machine support 6" wheels
• Work better for polishing, cutting, grinding, carving, of jewelry, rock, aluminum, chrome, precious metal, jade, wood, plastic, model project.

Specification of Portable Table Saw:

• Voltage: 110V 60Hz
• Power: 200W
• Speed: 0-10000r/min Adjustable
• Table Saw Arbor Size: 8mm
• Machine Size: 10.4"X 8.7"X 5.3"
• Weight: 15.4 lbs / 7 kg

Grinding Wheel

Size: Outer diameter:69mm; Inside diameter:10mm; Thickness:18mm

Fiber Wheel

Size: Outer diameter:71mm; Inside diameter:10mm; Thickness:20mm

Wood Cutting Disc

Wood Cutting Disc Size: Outer diameter:150mm; Inside diameter:20mm

Product description

Application:

This machine mainly used for all sorts of conceivable operation: milling engraving carving drilling polishing clean derusting and other more use. Suitable for burnish and polish jewelry metals, stone, glass, jade ect.



Feature:

Voltage: AC 220V

Frequency : 50Hz/60Hz

Power:350W

Speed: 0 - 10000r/min Adjustable

Flexible shaft clamping diameter: 0.3 - 4mm

Clamping chuck clamping diameter: 0.6 - 6mm

Size: Approx. 165 * 195mm

Weight:Appr. 5kg



Package Included:

1x Benchtop Polisher

1x 0-4MM collet chuck

1x stainless steel shaft

2x Polisher Post

1x Threaded spindle

1x wheel press plate

2x chuck key

1x fiber wheel

1 Pair wrench

1 Set of 0.8-6mm chuck assemblies

1x 100 mm wood cutting blade

1x 100 mm glass stone cutting blade

• Quality or speed with this well balanced precision polisher, works with standard wheels and buff pads up to 4 inches.　
• The two tapered spindles attach to the 1/4" motor shafts and accomodate muslin or buffing/polishing/grinding, cutting wheels up to 4" in diameter.
• Application range:denture, jewelry, jade, stone carving, wood carving, gold, handicraft carving.
• Function: cutting, carving, drilling, grinding, polishing, milling, grind-milling, grinding, brushing, cleaning, derusting, etc.
• Suitable for grinding jade, wood, amber, beeswax, agate and other material , with a varity of polishing oarts for convenience.

Product features

110V Benchtop Buffer Rock Grinder Polishing Machine 0-10000r/min with Flexible Shaft

The third generation mini table saw machine with larger operating platform and better accessories than 1st 2nd generation.Work better for cutting, carving, drilling, grinding, polishing, milling, grind-milling, grinding, brushing, cleaning, derusting, etc

Mini rock saw for cutting rocks has a detachable, flexible 42.5 inch shaft and angle adjustable ruler, suitable for various size cutting. It's very flexible and practical for DIY enthusiasts due to the precision maneuverability.

Quality or speed with this well balanced precision polisher, works with standard wheels and buff pads up to 4 inches.The two tapered spindles attach to the 1/4" motor shafts and accommodate muslin or buffing/polishing/grinding, cutting wheels up to 4" in diameter．

Quality or speed with this well balanced precision polisher, works with standard wheels and buff pads up to 4 inches -Dual Buffing Wheels Polisher

Compact but high efficiency: Comes with a grinding wheel, fiber wheel, jade cutting disc, and woodcutting disc(can be used with wheels up to 6 inches in diameter) and 2 blades can cut 30mm objects. Threaded mandrels help you easily replace the buffing wheels as needed.

Easy-operated Benchtop Jewelry Polisher

Mini rock saw for cutting rocks has a detachable, flexible 42.5 inch shaft and angle adjustable ruler, suitable for various size cutting. It's very flexible and practical for DIY enthusiasts due to the precision maneuverability.

Widely Applications

Suitable for grinding jade, wood, amber, beeswax, agate and other material , with a varity of polishing oarts for convenience. Function: cutting, carving, drilling, grinding, polishing, milling, grind-milling, grinding, brushing, cleaning, derusting, etc.

Product description

Warm Notice: dear customers, the 2 black bonnets (Spindle Sleeves) are marked with "L" and "R", "L“ bonnet (Spindle Sleeve) should be installed at left side of the machine, "R" bonnet/ (Spindle Sleeve) should be installed at right side of the machine, or the bonnets ( (Spindle Sleeves) will not stand on the machine and do not work well; thanks much for your attention



Troubleshooting

- Motor overheated: Clean motor, let cool, and reduce workload.

- Motor or component loose: Replace damaged bolts/nuts or tighten if loose.

- Motor shaft bent: Test with dial indicator and replace motor.

- Motor or motor bearings at fault: Test by rotating shaft; rotational grinding/loose shaft requires bearing replacement

- Buffing wheel loose or worn: Replace buffing wheel;

- Tapered spindle sleeves dislodged: Reattach spindle sleeves

- Machine incorrectly mounted to workbench: Adjust feet, shim, or tighten mounting hardware.



Specifications:

- 200 Watt, 110V 60 Hz Single Phase

- Diameter: 110MM

- RPM (no load): 2000 to 7000 RPM



; Warm Notice: dear customers, the 2 black bonnets (Spindle Sleeves) are marked with "L" and "R", "L“ bonnet (Spindle Sleeve) should be installed at left side of the machine, "R" bonnet/ (Spindle Sleeve) should be installed at right side of the machine, or the bonnets ( (Spindle Sleeves) will not stand on the machine and do not work well; thanks much for your attention

• Warm Notice: dear customers, the 2 black bonnets (Spindle Sleeves) are marked with "L" and "R", "L“ bonnet (Spindle Sleeve) should be installed at left side of the machine, "R" bonnet/ (Spindle Sleeve) should be installed at right side of the machine, or the bonnets ( (Spindle Sleeves) will not stand on the machine and do not work well; thanks much for your attention
• Spec. of this YaeTek 4-1/4" Buffing Buffer Machine 110V, 200 W, 60 Hz; Size: 11 CM
• RPM of Bench Polishing Machine (no load): 2000 - 7000 RPM
• Size of 2 Buffing Wheels: 4-1/2" x 1/2"
• 100% Brand New Jewelry Mini Bench Polisher

User questions & answers

Question:	How loud is this relative to other similar type machines? Thank you
Answer:	Yes. I’ve had this polisher for almost 1 year. and it works great
Question:	What is the width of the machine once it's set up
Answer:	Perfect fit for my Ryobi 8" pole saw. Blades were sharp. Used it to trim my apple, orange, loquat, and two other trees. It's still sharp.
Question:	Will it polish tumbled rocks
Answer:	8 "
Question:	will it polish the tarnish off of silver, copper and stainless steel silverware
Answer:	It fits my Ryobi P4360 8" pole saw

Product description

Specifications:

• Product Information:
• Model: Gem Faceting Machine
• Rated power: 180W
• Rated voltage: 110V/60Hz
• Rated rotate speed:2800r/min
• Outer size:41*25*27cm
• Polishing Disc's diameter: 8 inch
• Weight:22kg

 

Product usage:

• It's Easy to operate, small size, suitable for jade, jade, agate, amber and other precious stones processing and polishing, pendant grinding.

 

Package Included:

• 1 x Gem Faceting Machine
• 1 x Aluminum Plate ( 8inch)
• 1 x Manipulator

 

• Outer size:41*25*27cm
• Polishing Disc's diameter: 8 inch.
• Faceting machine easy to operate, small size.
• Suitable for jade, jade, agate, amber and other precious stones processing and polishing, pendant grinding.
• Package Included: 1 x Gem Faceting Machine, 1 x Aluminum Plate ( 8inch), 1 x Manipulator.

User questions & answers

Question:	how does the water supply work
Answer:	very quiet & friendly to beginers
Question:	if i add a water source to make the disk wet while using will it break the machine? will the water be trapped
Answer:	About 9"; I actually haven't set mine up yet.
Question:	Does this have a 96 index
Answer:	Most definitely.!

Product features

Product usage

It's Easy to operate, small size, suitable for jade, jade, agate, amber and other precious stones processing and polishing, pendant grinding.

Product description

Variable speed from 0 to 10, 000 RPM. 3x3/ 4 in. 80 grit Grinder Stone and fiber wheel. Includes 10 assorted 1/8 inch shaft grinding stones.

• A powerful and portable mini bench grinder and buffer tool with variable speed control for precision buffing and grinding
• A flexible 31-inch long-arm shaft allows excellent maneuverability on small wood or metal objects
• Includes a powerful 120W high-speed motor and sensitive speed control from 0 to 10,000 RPM
• Excellent for deburring and fine carving, switch from grinding to buffing or use it as a rotary tool
• Includes 10 assorted 1/8" shaft grinding stones.

User questions & answers

Question:	What size is the shaft for the Grinding wheel
Answer:	This is chalk paint brush for chalk painting and also for waxing the furniture. you can use any type of chalk paint with this brush and also can you wax of any type. for wood polish it may not work, but for wood painting it will work.
Question:	Can the wheel guards be removed to use let's say a 5 inch grinding wheel
Answer:	Yes. They are bristle brushes which can be washed with soap & water & dried before reuse.
Question:	can this be used as a wet grinder
Answer:	It is a flat piece of wood.
Question:	can you repair disc like music cds (scratches
Answer:	Yes, This brush is used to apply both the paint or the wax.

Product description

Specifications:

Voltage: 110V

Power: 350W

Speed: 0-10000rpm

Wheel material: white steel grit and fiber

Wheel diameter: 7.5cm/2.76inch

Wheel thickness: 20mm

Product net weight: 3.0kg

Package weight: 3.6kg

Package size: 36x23x17cm/14.17x9.01x6.70 inch



Package Content:

1* Main machine

1* Collet Spindle

1* Flexhaft

1* Handle

2* Grit Wheel

1* Fiber Wheel

1* English Manual

• 【Equipped with Two Wheel】- The package is included in grit wheel and fiber wheel. The two tapered spindles attach to the 1/4" motor shafts and suitable for muslin or buffing / polishing / grinding. Cutting wheels up to 4" in diameter.
• 【Speed Adjustable】- This jewelry buffer polisher has a powerful motor that starts up quickly and can adjust speed up to 10,000 rpm, this jewelry buffer polisher can meet your different speed needs.
• 【Multi-function Flexshaft 】- It's got a nice flexshaft with 4mm stainless steel handle which can be used with a variety of grinding discs, cutting wheel , brush head. 【please note: 】The flexshaft is recommended to install on the right side of the machine.The flexshaft should not be severely bent or twisted, otherwise the flexshaft core is easily damaged.
• 【Safe to Operate】- The heavy and stable duty base to reduce vibration and the adjustable rotation speed, quiet and less noise, more safety and comfortable.
• 【Wide Application】- This bench polisher is suitable for jade, agate, metal, wood, amber, beeswax engraving, polishing and drilling, also can be used for beads, Bodhi, various types of DIY handicraft polishing, grinding, family small workshops, cutting, polishing, etc.

User questions & answers

Question:	Does this come with adjustment/tightening wrenches, wheel mandrels, and other accessories besides the ones listed in the description
Answer:	I think id does. I am out of town right now and can't check to be sure.