8 best dewalt made toolboxes

Product description

Features: Engineered plastic side clips allows stackability with other boxes When carrying the toolboxes by hand, they can also be fastened together, allowing them to be carried as a stack Heavy duty metal latches and hinges for added durability Bi-material comfortable top handle is easy to grip Locking side handles offer alternative lifting and easier manoeuvrability Durable 4mm PP structural foam plastic for high impact protection IP65 - Dust tight and water jet resistant due to high performance seal in the lid A pressure relief valve enables equalisation of the pressure inside and outside the unit Padlock eyes provide lockable security

• Engineered plastic side clips allows stackability with other boxes
• When carrying the toolboxes by hand, they can also be fastened together, allowing them to be carried as a stack
• Heavy duty metal latches and hinges for added durability
• Bi-material comfortable top handle is easy to grip
• Locking side handles offer alternative lifting and easier manoeuvrability

User questions & answers

Question:	Will the dewalt dcs570b 7 1/4 circular saw and the cordless reciprocating saw fit? i have a separate box for drill and driver
Answer:	This basketball hoop stand suitable for the size of basketball diameter:22cm /8.66inch.
Question:	Could I stand on this
Answer:	Hi, yes, for the 10ft trampoline, it is approx. 10ft in diameter, and the jumping mat diameter is about 8.64ft.
Question:	Will a dewalt framing gun fit in here
Answer:	335 lbs.
Question:	I have the dewalt tool set with the circular saw, reciprocating saw, drill, and small light. Would all of these tools fit in this box with the tray
Answer:	No

Product features

About us

Raymond E. DEWALT followed in his father's steps, and worked in plants and construction after leaving school. In all fields of work he encountered the issue of high labour costs. To help reduce these costs, whenever possible he installed a machine to handle specific needs.

One fine day, M. DEWALT was hired to head a wood mill, manufacturing numerous products, from basic boxes to complete houses. The amount of work exceeded the company's capacity by far, but its owner could not afford to increase the headcount. The only solution was to ensure his men produced more work. M. DEWALT built a yoke, which he connected directly to a motor and a saw. He then fitted it onto a standard arm. The saw could be raised, lowered, moved forward and backward, and adapted to all types of angles. With this system, he could handle the same amount of work as four men, reducing labor costs beyond his wildest imagination.

Product description

The DEWALT DWST08250 Tough System DS450 Mobile storage is a Mobile toolbox, compatible with all existing modules of the Tough System storage family. The stackable base box is made with durable 7″ wheels and a top handle for carrying, this unit brings new meaning to portability and mobility. The patented design of the lid opens with a pull-back handle and a non-detachable lid enables full accessibility and maximum storage volume. A removable tray allows for Quick access to tools that are most used. The metal-plastic telescopic handle and strong handle grip provides great durability for all job sites. This DS450 Mobile storage features an IP65 rated dust and water seal, Rust-resistant metal latches and internal organization.

• Unique design of lid opening with a pull-back handle, enables maximum storage volume with a non-detachable lid
• Bi-material telescopic handle
• Side latches enable stacking additional modules on top
• IP65 integrated water seal for protection of Content from the environment
• Removable tray for quick access to tools that are most used

User questions & answers

Question:	Is this waterproof
Answer:	There is wrench in the package and you can use wrench to assemble the basketball hoop system.
Question:	Is this compatible with the L frame system? Is looks like this wont slide on like the other boxs very
Answer:	The full size basketball does not fit the hoop. Our basketball hoop is 16'' and you can use smaller basketball to play.
Question:	Does it come with replacement wheels
Answer:	The item can be returned within 30 days as long as it have original packaging and the product is not used or man-made damaged.
Question:	Does anyone have the height of the handle at its lowest point? I want to know if it would fit in the trunk of my car
Answer:	I would say up to 10 years, yes- older than that I think it would be too short. The highest this hoop goes is 6'9"- a standard hood is 10'.

Product description

The 24amp; ; one-touch tote box by DEWALT features a one-handed latch operation that allows opening when your other hand is occupied and a V Groove on the lid, suitable for pipes and lumber. The integrated water seal helps protect the contents from water and dust, And the soft grip handle allows for easy grip and carrying.

From the Manufacturer

The DEWALT DWST24082 24-Inch One Touch Box has a one-handed operation latch that allows for opening when other hand is occupied. It has an integrated water seal to help protect tools and parts from water and dust. It has a comfortable soft grip top handle for easy grip and carrying. There is a V groove on lid suitable for holding pipes and lumber while being worked on.

• The product is Highly durable
• This product is easy to use
• The product is manufactured China
• One-handed operation latch allows opening when other hand is occupied
• Integrated water seal to help protect from water and dust
• Soft grip handle for easy grip and carrying
• V groove on lid suitable for pipes and lumber

User questions & answers

Question:	IS THERE A TRAY ON THE INSIDE
Answer:	625mm (24.6inches) handle fully retracted
Question:	I bought this, and it has spots on the sides that look like something would slip into it. What are they for
Answer:	I am pretty sure they will fit. I have a drill, impact, recip saw, and multi tool all with batteries in mine.
Question:	What is the actual interior dimension? I'm looking for something that will hold a 22" torque wrench
Answer:	yes BUT! the manufacturer does NOT state it as a feature. IT COULD BREAK!!!!
Question:	can you stand on it (225 lbs
Answer:	Yes, im sure it will. I currently have 11 cordless tools including Dewalt's 20v 30° Framing nailer, 60v wormdrive, 60v stud and joist VSR drill, 20v jigsaw, compact recip saw, router and hammer drill all in mine (with a single 20v and FLEXVOLT battery to share) its all in how you pack them in.
Question:	is it magnetic
Answer:	No you would have to get the DeWalt ds450 mobile storage box plenty of room in it. The ds300 is mostly for hand tools. I have them both and love it Hope that helps.

Product description

Ideal tool bag for all of your jobsite and on-the-go needs. Made of durable poly fabric, its open-top design allows for excellent visibility and access to all your tools and supplies. Plus, it has a convenient adjustable, non-slip padded shoulder strap and base pads at the bottom of the bag for long-lasting protection.

From the Manufacturer

CLC has been the industry standard for over 30 years through an unrivaled dedication to innovation, craftmanship, and quality.

• 33 POCKET TOOL CARRIER: Quick-clinch level cradle utility knife pocket, electrical tape strap and measuring tape clip
• COMFORTABLE SHOULDER STRAP: This DEWALT tool bag features an adjustable, non-slip padded shoulder strap and padded bar handle for added comfort during transport.
• EASY ACCESS TO TOOLS: The open-top design of this DEWALT tool carrier with collapsible bar handle allows for excellent visibility and access to all contents.
• HEAVY DUTY TOOL BAG: This tool bag is made with heavy-duty poly and ballistic poly fabric construction and includes base pads to protect the bottom of the tool carrier.

User questions & answers

Question:	How much weight can the handle withstand
Answer:	Yes it will. Use the insulated terminal die. There's no need use severe pressure when crimping these connectors. Good luck.
Question:	I need to slide it on a 11" high shelf... If I collapse the handle will it fit
Answer:	Yes, use dies H.
Question:	Hello, are the side rigid or do they bulge out when loaded? Thanks
Answer:	Not 100%. You can crimp the wire end, but seals will be deformed. H6 and H7 dies are for metri- and weather pack. Not part of this kit.
Question:	What are the interior dimensions
Answer:	No, it´s too wide, you can´t only crimp the bare cable, it´ll grab the cover tabs. You need 1/4" wide yaws and these are 3/8" or 7/16" wide.

Product features

DEWALT DG5597

Ideal tool bag for all of your jobsite and on-the-go needs.

Durable

Made of durable poly fabric, its open-top design allows for excellent visibility and access to all your tools and supplies.

Convenient

Plus, it has a convenient adjustable, non-slip padded shoulder strap and base pads at the bottom of the bag for long-lasting protection.

Reinforced Pads for Base Durability and Bag Longevity

The DG5597 tool bag has reinforced plastic pads on the bottom. The pads protect your bag from wear as well as elevating it to prevent dirt and water from damaging your bag and tools.

Made of Heavy-Duty Poly and Ballistic Poly Fabric

Padded carrying strap and padded carrying handle make carrying this bag comfortable. Durable fabric increases longevity and is ideal for day to day use.

Open Top Design Helps Carry Larger Tools

The Open-Top Design with Collapsible Bar Handle Allows for excellent visibility and access to tools and parts in the large center cavity.

Product description

DEWALT 28 In. Tool Box On W

• Sold on Amazon

User questions & answers

Question:	What is interior dimensions? Would something 26 inch fin in the inside
Answer:	It measures 22 inches from corner to opposite corner all the way to the bottom. However it is only 21 inches from side to side inside so in summary the wrench will fit if it's laid in diagonally.
Question:	what is the inside dimensions L x W
Answer:	You know, I love this box. It's very tough, and simple! I don't weigh 225 but I wouldn't have any qualms of putting all of my 180lbs on it. I mean, it's not a step tool, but as a tool box, you can't go wrong for 20 bucks.
Question:	I don’t understand the dimension of this product. Forget the inside I need to know what’s the dimensions outside
Answer:	nope the 48 inch is but not the 72 inch
Question:	Is it waterproof or water resistant
Answer:	No, the DWST08250 is not waterproof. The Tough System Box is IP65 integrated water seal for protection of content from the environment
Question:	Would this toolbox last if mounted on an outside trailer... or would the plastic be fragile in outdoor cold weather? Tnx
Answer:	The DEWALT DWST08250 is compatible with the DEWALT TOUGHSYSTEM storage boxes.
Question:	What are the inside dimensions
Answer:	Replacement wheels are not included with this unit.

Product description

The ToughSystem® 2.0 Extra Large Toolbox has patented auto-connect side latches, allowing for one-hand operation. It also has 2-piece metal front latches for added durability when securing tools inside the box. It is IP65 rated for dust and water resistance and has a 110 lb. load capacity. The toolbox has a removable inner tray for optimal organization. The ToughSystem® 2.0 Extra Large Toolbox is backwards compatible with any ToughSystem® product.

• Patented auto-connect side latches
• 2-piece metal front latches for added durability
• IP65 rated for dust and water resistance
• Removeable inner tray
• Backwards compatible with any ToughSystem® product

User questions & answers

Question:	Will this fit a dewalt 10” mitre saw
Answer:	not meant for outside use in my opinion
Question:	Anyone know if and when dewalt is going to start selling the three drawer toughsystem 2.0 box
Answer:	I don't want to say that Matthew H. is lying, or especially the careful measurements of Christopher Griffin aren't perfectly accurate, but the DeWalt toolbox that I received measures (at the BOTTOM, on the inside) is more like 23 1/2" long x 9 3/8" wide. This was a bit of a shocker because the tool I bought the toolbox to "house" is longer than that! (But I was able to make it fit by screwing in the extreme parts more than I thought I'd have to. So all is well in the end.) Height up to the bottom of the removable tray is just about 6 inches. By removing the tray it will accommodate height up to about 9 3/8". --So height (if you take out the tray) is SAME as the width (at the bottom, inside dimension). Both are 9 3/8". It's a great toolbox, and I love that my specialized tool (an antique hand-crank drillpress from about 1910) has a "home" that says DeWalt in big yellow lettering! But yeah, 23 1/2" is all you're going to get, lengthwise.
Question:	Will this hold the dewalt cordless framing nailer and the dewalt 18 gauge nailer at the same time with the dewalt 60v 7 1/4 saw
Answer:	There is a small half tray will fit on either side...
Question:	Are there any pictures of the inside or should i keep using a milk crate
Answer:	I have been trying to figure it out

Product description

The DEWALT DWST08130 tough system DS130 suitcase features organizational elements including four deep, large-size cups for storage of smaller tools and parts; storage pockets in the lid for screwdrivers and drills; and a padlock eye for extra security. Side latches allow stacking product to other tough system modules, and also compatible with tough system carrier. The tough system suitcase also features an IP65 rated dust and water seal, Rust-resistant metal latches, and a durable coated handle—all perfect solutions for unpredictable weather elements. Includes 1) suitcase toolbox.

• Structural foam material gives Robust structure to the case
• Includes screwdriver and drills storage pockets, & 4 large deep cups -Tools and accessory items sold separately
• Integrated IP65 water seal for protection of contents from weather conditions
• Side latches allow stacking product to other ToughSystem modules
• Compatible with ToughSystem carrier
• HEIGHT (IN) - 6-1/4 IN, OVERALL LENGTH (IN) - 21-3/4 IN, WIDTH (IN) - 13-1/4 IN

User questions & answers

Question:	Can all the internal dividers be removed? I need a case this size but all as a single open space. Have a pic of completely empty box
Answer:	No. Inside the case is not 26 inches all the way down. On each side about an inch down from the top the measurement goes to about 24 1/2. I would not recommend. It would be too tight of a bit. It is really good for something 24 inch or less.
Question:	Can all of the cups be remove so its just an open box
Answer:	28” L 12.5w 9” depth I Arrange my whole combo kit and six batteries on the inside of it
Question:	Are the storage trays and lids removable
Answer:	The depth would be 12 inches on the outside everything else stays the same
Question:	Is this compatible with the dewalt tough chest
Answer:	Definitely not water proof. It is a heavier plastic that they use in their blow molded cases for tools. I found it worth while. Box is well constructed. I wood purchase again.

Product description

The DWE402K 4-1/2-inch (115mm) Small Angle Hand Grinder Kit features three powerful systems for maximizing performance such as the Dust Ejection System for preventing damaging dust from entering the grinder tool, One-Touch Guard for 360-degree rotation, and Quick-Change Wheel Release for easy wheel removal.

• 11 Amp AC/DC 11,000 RPM motor of the angle grinder is designed for faster material removal and higher overload protection
• Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the metal grinder through the air intake vents
• DEWALT angle grinder comes with low profile gear case allowing access into tight spaces
• Quick-Change wheel release allows tool free wheel removal without the need for a wrench
• One-Touch Guard allows for 360 degree rotation of the guard in a single action
• Paddle switch with safety lock-off prevents accidental start up
• Matching wheel flanges allow the use of common accessories

User questions & answers

Question:	Is the kit box metal or plastic? durable? big enough to hold accessories like blades and dust shroud
Answer:	Yes, We can do that for you. Please place your order with one of our existing designs and let us know with your order ID number and we will change the thin line color to white
Question:	does the grinder fit in the case with the handle still attached
Answer:	No that would be awesome
Question:	Tool for changing discs
Answer:	Yes, we can place lettering such as state name or your custom text instead of red line. Please contact us thru amazon buyer-seller messaging center.
Question:	Where is the quick change wheel release? I don't see any way of changing the wheel without a tool
Answer:	Front Flag design size Width :4.0" x Height : 2.25"