12 best electric drills

Product description

The BLACK+DECKER LDX120PK 20V MAX Cordless Drill and Battery Power Project Kit is a great power tool set for a variety of home projects. Includes 20V cordless drill, which provides an extra level of control with an 11 position clutch that prevents stripping and overdriving screws. The lithium ion battery is always ready and holds a charge up to 18 months. This battery powered drill kit includes 68 hand tools and accessories and a carrying bag for easy portability and storage. Includes carrying bag for easy portability and storage.

• Includes 20V Lithium drill for a variety of home projects, hanging pictures or wall decor, assembling furniture, updating fixtures, building birdhouses
• Lithium ion battery: Always ready, holds a charge up to 18 months
• The 11 position clutch prevents stripping and overdriving screws
• Included components: LDX120 drill/driver, 20 volt max lithium ion battery, charger, storage bag, tape measure, adjustable wrench, needle nose pliers, manual screwdrivers, utility knife, slip joint pliers, 12 ounce hammer, ratcheting screwdriver, hole saws with mandrel, (32) screwdriving bits, magnetic bit holder, (10) drilling bits, spade bits

User questions & answers

Question:	I need to replace the battery. Where can i find a spare that'll work for this set
Answer:	http://www.amazon.com/HQRP-LDX120PK-LDX120SB-LDX220SB-SSL20SB-2/dp/B013K0PZD8orhttp://www.walmart.com/ip/Black-Decker-Double-Pack-20V-Lithium-Ion-Battery-1.5-Ah-LBXR20-OPE2/30224752orhttp://www.lowes.com/pd_15822-34252-LDX120C_0__?productId=3522832It is a 20V 1.5Ah battery (MAKE SURE YOU BUY THE RIGHT ONE) for the B&D LDX120PK.
Question:	Can this drive screws or is it only a drill
Answer:	With this drill having a little over 100 in/lbs of torque, when competitors are offering over 1000 in/lbs, I wouldn't trust this to drive anything but the smallest screws.
Question:	Does this kit include the Drill Charger
Answer:	the kit I received did have a drill charger. I am very happy with this purchase.
Question:	the weight of the drill with the battery charged is the same with the dead battery
Answer:	It would not weigh any differently, although it's mass would be lower due to the number of electrons available, which would be around .00000000000000012 g. So if you had 814,000,000,000 it would would have 1 gram of mass less. Which if you were buying trillions of them, you could save several grams as far as shipping weight goes, although it would take 600 million cargo ships to carry that amount, so, unsure if the 1 gram gain would be very noticeable, especially since it would take around 30 billion (each semitrailer carrying 13,567 cartons, which might be a stretch) semitrailer containers (the 24' ones.) The ONLY problem is, that if they even produced, say 1000 drill sets/minute (which also seems a bit high) it would take 1,548,000,000 years to make that many sets. But, if you think that the amount of saved weight is worth it, buy 814,000,000,000,000 drills, use them, box them back up without adding any mass of any sort (including skin cells, which weigh somewhere in the neighborhood of 170,000x greater than the mass of an electron) and ship them, you would have shipped the items back with 1g less mass overall. We also didn't take into account elevation, which just by changing the amount of air in 814,000,000,000,000 boxes would be a "weight" difference in the millions of tonnes.

Product description

The Bosch PS31 12 Volt Max 3/8 in. Cordless drill/driver kit has professional grade power for 90 percent of tasks, but only weighs just over 2 lbs. An ideal tool to carry to any work site, this tool, with its 2 speeds and 20+1 torque settings, is a carry along solution for applications such as installing and electrical work that requires a great deal of overhead drilling and driving. It features a 3/8 inch single sleeve 3 jaw chuck that securely holds bits. It has an integrated LED light, an integrated fuel gauge and Bosch lightweight 12 volt max power system that delivers longer run time with no increase in weight.

• Premium Performance-to-Size Ratio: The PS31-2A has professional grade power at an incredibly light-weight of just over two pounds; The performance-to-weight ratio makes this tool a great solution for electricians, plumbers or contractors who do a great deal of over the head drilling or driving
• Versatile Use: The high torque and the convenience of two speed settings allows the Bosch PS31 2A power drill to tackle applications in materials such as drywall, wood and even metal
• Precision: This electric drill driver combo has two speeds (0-350 RPM and 0-1,300 RPM) and 20+1 clutch settings, allowing users to make precise torque adjustments for accurate screw driving and drilling
• Durability: The Bosch 12V battery drill set comes with two 12V Lithium Ion batteries to provide increased runtime
• Visibility: The cordless drill driver boasts integrated LED lights for improved visibility, allowing you to work anywhere, anytime, even in dark corners and low-light areas

User questions & answers

Question:	Will this be powerful enough to drill 2” 3/8 holes in tables
Answer:	4.3 out of 5 stars 1,373Reviews COMOWARE Titanium Twist Drill Bit Set - 13 Pcs Hex Shank High Speed Steel for Wood Plastic Aluminum Alloy, Quick Change, 1/16"-1/4" #1 Best Seller in Hex-Shank Drill Bits I am assessing this is what you are looking for. They come in bigger size drills too.
Question:	Can this item drill a concrete wall
Answer:	No video, instructions are pretty much all you need
Question:	what type of case does this come with
Answer:	No movement , but it is so hard to get the air out to roll it up, I love sleeping on it, , but not able to roll out the air, am a lady, 70 and my joints in my hands are bad, but its so comfortable
Question:	Can you leave the battery in the charger. Is it a trickle charger that will not damage the battery, but always leave it fully charged
Answer:	Hi thanks for your love for the mattress we still don't have single mattress, but it will be launched in a month or a shorter time.

Product features

Compact

7 In. compact length for working in tight spaces

Lightweight

A lightweight powerhouse at only 1.8 Lbs. in weight

Powerful

With 265 In.-Lbs. of max torque and speeds up to 1,300RPM

Precise

20+1 clutch settings for user control

Product description

The Black and Decker LD120-VoltA 20-Volt Max Lithium Drill/Driver with 30 Accessories come with the Black and Decker 20-Volt max Lithium Ion Battery. These batteries are always ready, holding a charge up to 18 months. This drill provides an extra level of control with a 24 position clutch that helps to prevent stripping and overdriving screws. It has a soft grip handle that provides added comfort during use and a light weight to prevent user fatigue. This drill is ideal for drilling and screwdriving through wood, metal, and plastic. The LD120-VoltA set includes: LD120 20-Volt MAX Lithium Drill/Driver, LB20 20-Volt MAX Lithium Ion Battery, LCS20 Charger, Brad Point Drill Bits, (10) 1-Inch Screwdriving Bits, 2-Inch Screwdriving Bits, Nut Drivers, Magnetic Bit Tip Holder and is backed by Black and Decker's 2 Year limited warranty.

• Ideal for drilling through or screwing in wood, metal, and plastic, soft grip handle provides added comfort during use
• The lithium ion battery holds a charge for up to 18 months
• 30 accessories include drill and screw driving bits, nut drivers, and magnetic bit tip holder
• Kit also includes one 20 volt lithium ion battery and charger; Uses: Drilling through wood, metal, and plastic, screw driving though wood, metal, and plastic. RPM: 0 650 rpm
• Chuck size: 3/8 inch; Clutch setting: 24; Included components: LD120 20 volt max Lithium drill/driver, LB20 20 volt max Lithium ion battery, LCS20 charger, brad point drill bits, (10) 1 inch screw driving bits, 2 inch screw driving bits, nut drivers, magnetic bit tip holder; Power source: Cordless

User questions & answers

Question:	What are the nut driver sizes
Answer:	The nut drivers are 3/16, 1/4, 9/32, 5/16.
Question:	Is this charger work in 220 Volt, and is this can drill con'c wall
Answer:	My husband says that you will need to buy a concrete bit which did not come in the kit. the bits that came with the drill are good for wood and metal. The charge is for 110 volt. Hope this helps.
Question:	Can l ues it to change tires
Answer:	Absolutely not. The lug nuts on tires are larger and require something like a torque wrench.
Question:	what size drill bits does it come with
Answer:	It came with 6 different drill bits I don't know how to classify the sizes.

Product description

DEWALT's titanium drill bits have a titanium coating that provides longer life when drilling in non-ferrous metals. These bits are also suitable for drilling in wood and plastic and are ideal for commercial and residential applications. Includes sizes from 1/6 inch to 1/2 inch in a plastic tough case.

• Titanium pilot point for longer bit life
• Starts on contact for cleaner holes
• No spin shanks. Clip latch for secure closing
• Tapered web provides greater durability to reduce breaking
• Includes sizes from 1/16 inch to 1/2 inch in a plastic tough case

User questions & answers

Question:	can the bits be used on metal and wood
Answer:	Yes they can be used on both metal and wood, but depends on what kind of metal. The description says that they provide longer life when used with "non-ferrous" (non-magnetic) metals (such as aluminum). The bits would wear out fairly quickly if used on other types of metals.
Question:	Can these be used to drill in concrete
Answer:	Not a concrete drill. Not much of a drill at all from the couple of times I have used these. Drill one hole and the tip is GONE! Terrible product.
Question:	would using cutting fluid for drilling into
Answer:	When drilling into metal especially thick metal. Cutting oil is always recommended. Unless you have several drill bits to ruin laying around.
Question:	are these hex shank bits
Answer:	Of the 4 sets in this kit, 3 sets are hex shank. DEWALT DWA2FTS100 Screwdriving and Drilling Set, 100 Piece AMZN reuses questions and answers on similar items.

• 8-amp motor delivers high performance in heavy-duty applications
• 3/8-inch all-metal ratcheting keyless chuck for greater bit retention
• Titanium Pilot Point for Longer Life
• Starts on contact for cleaner holes

User questions & answers

Question:	Is there a lock on the trigger to keep the drill in the "on" position
Answer:	No. There is no trigger lock on this otherwise excellent drill.
Question:	Is it reversible drill
Answer:	Yes and very easy to switch between forward and reverse. We have really put this drill to work and are very happy with its performance.
Question:	I don't understand the comments saying this drill is useless as a screwdriver. Anyone else agree that this drives screws as easily as cordless drills
Answer:	Most electric (mains powered/cord) drills make terrible screwguns and this drill is no exception. The issue is torque, which is not effected much by the speed of an electric motor. Electric motors deliver almost 100% of their available torque immediately upon being energized and will produce that same amount of torque throughout their speed range (that's why freight trains, in the US, are driven by electric motors. The engines you hear are diesel electric generators which power the electric traction motors that make the train go. Without that instantly available torque the train would never move). All electric motors deliver torque like this. It has nothing to do with a brand. That instantly available torque is also what makes mains powered drills tear up screw heads, break screws, shred driver bits and cam out of the screw head to put the distinctive track marks on walls and furniture. It's also what makes mains powered drills perfect for drilling holes, which is precisely what they're designed to do. Since you can't do anything practical to change the way electric motors work the solution is to design the screwgun around a motor with less torque and lower power requirements. It doesn't take much torque to drive a screw (next to none if properly sized pilot holes have been drilled) and useful levels of screwdriving torque can easily, and conveniently, be provided by 18v-24v which can be had in a small rechargeable battery. Unless you're doing a LOT of 1/4"+ diameter hole making buy an inexpensive mains powered drill and spend the extra money on a nice cordless driver/drill and batteries. You'll get a lot more mileage for your money that way.
Question:	What is the advantage of a mid handle grip rather than a pistol grip? I am a woman with average strength, inexperienced at DIY but want to learn
Answer:	Stability is better with the mid grip over the pistol grip in the sense that your hand is closer to the target rather than behind the whole drill. It has better control and is easier to keep on the head of a screw or what have you. :)

Product description

The DEWALT DCD771C2 20 Volt MAX Lithium Ion compact drill driver has a lightweight design with a high performance motor that delivers 300 unit watts of power. The high speed transmission delivers 2 speeds 0 450 RPMs and 0 1500 RPMs. The ergonomic handle allows comfort and control. The tools weighs 3.6 pounds and contains 2 20 volt MAX compact Lithium ion battery packs, a compact charger and durable contractor bag. Chuck type - Keyless.

• Compact, lightweight design fits into tight areas
• High performance motor delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
• High speed transmission delivers 2 speeds (0 450 and 1,500 rpm) for a range of fastening and drilling applications. Chuck type: Keyless
• 1/2 inches single sleeve ratcheting chuck provides tight bit gripping strength
• Ergonomic handle delivers comfort and control. Tool width: 1.9 inch
• Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. Battery capacity: 1.3 ampere hour

User questions & answers

Question:	can it drill 1/4 holes into plastic
Answer:	----Its not the drill, It's the BIT ----Hanson makes particular bits for drilling plastic, with any drill regardless of voltage, and theyre available most any good hardware store or Tap Plastics. They have a particularly pointed tip, so don't ever attempt to ever use them on wood or metal, as doing so would render it crapp for plastic use from then on. I have 1/8, 3/16, and 1/4 in my arsenal, and they pretty much cover any plastic, ABS, PVC, and especially Plexi-Glas projects I encounter. Yeah, they're a buck or two higher than regular bits, but they also wont crack your pretty plexi-glas project all to hell like a standard twist drill bit will.
Question:	Does this drill have a built in LED light
Answer:	Yes, it has a light. But it's worse than useless. It lights the area nearby, but casts a shadow on the spot you are drilling. The glare makes it actually harder to see what you're doing.
Question:	Would you recommend this drill over the DEWALT DC970K-2 18-Volt Drill/Driver Kit (http://www.amazon.com/dp/B002RLR0EY)? If so, why
Answer:	I had an oportunity to use the 18V when I installed the railings on my father in laws staircase. I worked absolutely great but I had to keep switching batteries and kept one on the charger. He got it last Christmas. I told myself then the Dewalt was far superior to the two brands of portable drills I was using that I was going to get a Dewalt for myself. Honestly, when I ordered the 20V I assumed it was the same as my father in law had but his was the 18V. I would be happy with either but the 20V I have is smaller in size and lighter than the 18V that he has. Plus the 20V lithium batteries last a long long time before you have to recharge but then again replacement batteries are expensive. I just used the 20V to build my garage and so far I've only swithed batteries 5 times and that includes all the siding, drywall, wire routing. BTW I use the new star bit screws for everything they are far superior to phillips and I have given all my boxes of phillips screws away; along with my two "other brand" cordless drills.
Question:	Does this unit come with one or two batteries
Answer:	As of March 22, 2020 the Description clearly says it comes with two batteries... "...The tools weighs 3.6 pounds and contains 2 20 volt Max compact Lithium ion battery packs "

Product features

20V Max Lithium Ion Compact Drill/Driver Kit

The DCD771C2 20V Max Lithium Ion Compact Drill/Driver Kit is lightweight and compact for working in tight spaces for long periods of time. High-speed transmission delivers 2-Speed variations allowing users to choose the level of performance needed for various applications.

• Bundle includes DEWALT DCD771C2 20V MAX Lithium-Ion Compact Drill/Driver Kit and DEWALT DW2166 45-Piece Screwdriving Set
• Drill is compact, lightweight design fits into tight areas
• Compact, lightweight design fits into tight areas
• High speed transmission delivers 2 speeds (0-450 & 1,500 rpm) for a range of fastening and drilling applications
• Bit set includes 45 screwdriving bits

User questions & answers

Question:	Is this Brushless
Answer:	Hi Diaz-- No This isn"t brushless But I can tell you that it makes no difference what so ever -- For the home owner this is the one you want..
Question:	Comes this drill with 45 pieces with 2 batteries
Answer:	this particular unit came with 2 batteries charger and a tot bag...
Question:	Include with the charger and battery
Answer:	It includes two batteries and a charger.
Question:	El taladro puede accionar como rotopercutor
Answer:	Yes, only domestic work

Product features

20V Max Lithium Ion Compact Drill/Driver Kit

The DCD771C2 20V Max Lithium Ion Compact Drill/Driver Kit is lightweight and compact for working in tight spaces for long periods of time. High-speed transmission delivers 2-Speed variations allowing users to choose the level of performance needed for various applications.

Product description

Jump back and forth between your two favorite bits with the 20V Power Share Switchdriver 2-in-1. With two rotating chucks, you can reserve one bit for the pilot hole and one for driving the fastener and just instantly switch between the two—no fumbling for bits in your pocket or dropping them down a ladder. And there’s no need to keep a second drill lying around. It makes projects where you need multiple bits go much, much faster. You can even keep one hand free to hold the project while you rotate the chucks with your other hand and a little help from your thigh or forearm. Just squeeze the red dual chuck release button and press the head against your arm or leg to switch it over. Easy-peasy. With 12 torque settings, up to a max of 265 in-lbs, you can find just the right amount of torque for the job, and not worry about stripping screws or damaging the project surface. And with two speeds, 0-400 revs/min, 0-1500 revs/min, you have the flexibility and power to finish any common drilling application. A 20V Power Share battery and charger are included with this Switchdriver, which you can switch out with any Worx Power Share tool on the platform. You save tons of money when you only need a few batteries to run an entire tool collection.

• [TWO BITS AT ONCE] Easily and instantly alternate between two bits on the innovative Switchdriver head. Drill a pilot hole then the screw, all without switching tools or bits
• [STRIP-PROOF] Automatic torque control stops you from stripping screws. It also prevents you from damaging the surface of the project
• [DO IT ALL WITH THE SAME BATTERY] Worx Power Share is compatible with all Worx 20v and 40v tools, outdoor power and lifestyle products
• [2 SPEEDS] Variable gear train lets you go slow for backing out or drilling into tricky materials, or fast for driving your screws home
• [JUST PRESS THE BUTTON] Switch between the alternating ¼” chucks just by pressing a button. The heads rotate 180-degrees and you get a whole new tool without having to get down from the ladder
• [LED WORK LIGHT] Work in dark or dusty spaces with the trigger-activated LED light. An illuminated workspace is a safe and efficient workspace
• [LIGHTWEIGHT, COMPACT] At just 2.75 lbs., you can use the Switchdriver all day without strain. At that weight, you can maneuver into high and tough to reach spaces

User questions & answers

Question:	How much power does this have compared to dewalt or bosch and what is the typical battery life under heavy use
Answer:	This model is rated at 310 in-lbs of torque at 400 rpm. Dewalt's DCD995/990 is rated at 708 in-lbs at 450 rpm (faster and stronger). The Dewalt is also capable of up to 2000 rpm vs. the WORX's 1500 rpm. However, Dewalt's $100 model (DCD771) is less than half as powerful as their flagship, but still slightly more powerful than the WORX. Having said that, the WORX should be more than powerful enough to do most things around the house (if that's what you're using it for). 310 in-lbs is a lot of torque. You only need around 75 in-lb to drive deck screws. But these days I've discovered than an impact driver is far better at driving screws because you don't have to put nearly as much pressure on the head of the screw. Impact drivers are far more powerful (1850 in-lbs).
Question:	Is the drill strong enough to use with a Kreg pockethole jig? The concept is fine but there are questions...drill size, strength
Answer:	Used it with my Kreg setup with no problem, unit is easy to handle and more then powerful enough
Question:	Specs say bare tool; what does that mean
Answer:	Usually "bare tool" is specified when you order without batteries or charger and use with another WORX tool that uses the same battery. I do not believe this tool is available that way as of yet. My tool came with two batteries, a charger and several 1/4" drive bits.
Question:	Does the switch driver come with a battery charger and extra battery
Answer:	Mine came with 2 batteries.

Product features

Built-In LED

This trigger activated light illuminates any work area, so you can see what you’re drilling in the dark. Perfect for working in basements, outdoors, or tight spaces without lighting.

Rotating Head for Instant Bit Switching

Dual ¼” chucks let you keep your 2 most useful bits always installed. Use one, twist, use the other. No more fumbling for bits or having to use two drills.

Variable 2-Speed Gear Train

Slow for backing out fasteners or for drilling into certain surfaces, fast for the other stuff. 2 speeds to handle every common drilling and driving application.

Electronic Torque Control

This feature helps you manage force, so you won’t over-drill. It virtually eliminates stripped screws and damage to the work surface.

Drill, Rotate, Drive

Drill your pilot hole, rotate the Switchdriver head, drive in your fastener. Drill, rotate, drive again. It makes laborious tasks like building a deck or putting up a fence go much, much quicker.

Tool-less Quick Change

And when you need that 3rd or 4th bit the ¼” hex quick-change chucks don’t require any tools. Just pull the collet locking sleeve away from the tool, replace the bit, and let go. That’s it. Your bit is perfectly seated and tightened.

Product description

Delivers increased drilling performance and increased overload protection for added durability. 0-1250 RPM (revolutions per minute), variable speed reversing switch for increased versatility. 980 UWO (unit watts out). 1/2" Keyed chuck for greater bit retention. 360 deg (Degree) locking side handle for greater control and versatility. Anti-slip Soft grip handle and two-finger trigger for increased comfort. Metal gear housing for jobsite durability and increased reliability. 4.9 lb. (Pound). 3 year limited warranty. This product is manufactured in Mexico. This product meets customer requirement.

Versatile and easy to handle, the DEWALT DWD210G 1/2-Inch VSR Pistol-Grip Drill delivers the power you need for all your jobsite drilling and fastening needs. The DWD210G features variable-speed control, a convenient reversing switch, a comfortable pistol grip, and an auxiliary handle.

Patented DEWALT-Built Motor with Overload Protection

With its powerful 10 amp motor, the DEWALT 1/2-Inch VSR Pistol-Grip Drill is capable of delivering speeds of 0 to 1,200 rpm. This translates to quick, versatile drilling and driving.

At the heart of this drill's performance is a patented DEWALT-built motor that generates 50 percent more power than a standard motor of the same size. It also provides increased overload protection for extended tool life.

Designed for Versatility and Durability

As versatile as it is powerful, the DWD210G functions well for both steel and wood applications. When working with a spade or auger bit in wood, it offers a 1-1/2-inch capacity, and it can handle a capacity of 2-9/16 inches when used with a self-feed unit. The drill can also handle a 1/2-inch twist bit when working with steel. When used with a hole saw, the drill offers a 3-5/8-inch capacity in wood and a 2-inch capacity in steel.

Its keyed 1/2-inch chuck grips the bit securely to prevent slippage, and a metal gear housing provides added durability.

Built with Comfortable, Accurate Handling in Mind

Comfortable handling goes a long way toward ensuring accurate results. The DWD210G is built with an ergonomic grip, and its two-finger rubber trigger makes power control easy. A locking, 360-degree, soft-grip side handle gives you hand-position options for improved user comfort and better overall command of the drill. And it weighs an easy-to-manage 4.9 pounds, decreasing user fatigue after extended use.

The DWD210G 1/2-Inch VSR Pistol-Grip Drill comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DWD210G 1/2-Inch VSR Pistol Grip Drill, 360-degree locking side handle with soft grip, and chuck key with holder.

From the Manufacturer

Pistol grip 1/2-Inch variable speed with reverse drill 10.0-Amp motor delivers increased performance 0-1200 RPM, variable-speed reversing switch for versatility. Soft grip handle and two-finger trigger provides comfort. Metal gear housing for jobsite durability and reliability.360-Degree locking side handle. Generates more power with improved overload protection for added durability.

• Country of Origin:Mexico
• Package length:11.0"
• Package width:14.0"
• Package height:4.0"

User questions & answers

Question:	Will this drill be able to bore out 1 1/4" holes in 4x4 studs
Answer:	No. There is no trigger lock on this otherwise excellent drill.
Question:	Any masonary bit included
Answer:	Yes and very easy to switch between forward and reverse. We have really put this drill to work and are very happy with its performance.
Question:	Has anyone found a good case for this drill
Answer:	Most electric (mains powered/cord) drills make terrible screwguns and this drill is no exception. The issue is torque, which is not effected much by the speed of an electric motor. Electric motors deliver almost 100% of their available torque immediately upon being energized and will produce that same amount of torque throughout their speed range (that's why freight trains, in the US, are driven by electric motors. The engines you hear are diesel electric generators which power the electric traction motors that make the train go. Without that instantly available torque the train would never move). All electric motors deliver torque like this. It has nothing to do with a brand. That instantly available torque is also what makes mains powered drills tear up screw heads, break screws, shred driver bits and cam out of the screw head to put the distinctive track marks on walls and furniture. It's also what makes mains powered drills perfect for drilling holes, which is precisely what they're designed to do. Since you can't do anything practical to change the way electric motors work the solution is to design the screwgun around a motor with less torque and lower power requirements. It doesn't take much torque to drive a screw (next to none if properly sized pilot holes have been drilled) and useful levels of screwdriving torque can easily, and conveniently, be provided by 18v-24v which can be had in a small rechargeable battery. Unless you're doing a LOT of 1/4"+ diameter hole making buy an inexpensive mains powered drill and spend the extra money on a nice cordless driver/drill and batteries. You'll get a lot more mileage for your money that way.
Question:	Why is speed described as 0-1200 RPM and review says it starts at either 250 or 600 RPM? I need something with true variable speed
Answer:	Stability is better with the mid grip over the pistol grip in the sense that your hand is closer to the target rather than behind the whole drill. It has better control and is easier to keep on the head of a screw or what have you. :)

Product features

DWD210G

The DWD210G 1/2" (13mm) VSR Pistol Grip Drill has a powerful 10 Amp motor with overload protection to drill at 0-1250 rpm in forward or reverse. Constructed with soft grip handle for comfort and housed in metal gear for durability.

Special Features

As versatile as it is powerful, the DWD210G functions well for both steel and wood applications. When working with a spade or auger bit in wood, it offers a 1-1/2-inch capacity, and it can handle a capacity of 2-9/16 inches when used with a self-feed unit. The drill can also handle a 1/2-inch twist bit when working with steel. When used with a hole saw, the drill offers a 3-5/8-inch capacity in wood and a 2-inch capacity in steel.

Its keyed 1/2-inch chuck grips the bit securely to prevent slippage, and a metal gear housing provides added durability.

• 🎁 Valentine's Day Gift for Father, Husband, Boy Friend, DIYer 💝
• ◆READY TO GO Drill Set: GOXAWEE Home Drill Set comes with a complete drill bit sets that can work on both wood and metal. The Masonry Drill Bit is especially for drill concrete hole. The extra up to 100pcs accessories enable the electric drill more functional & practical. The tool box is very sturdy and conveniently organizes the tool and accessories. It's a You Cannot Miss everyday Drill/Driver for home users.
• ◆NO INTERRUPTION on Project: You can constantly work your task. This cordless drill came with 2pcs 1500mAh Li-ion Batteries and 1-hour fast charger that can use for a long time after each charge. The additional battery is a bonus that makes the cordless screwdriver drill always ready to use without restriction. It's also a good investment for the jobs around the house and garden.
• ◆Accurate Control & Adjustable Mode: The variable speed trigger allows for precise speed control by your own fingers. Besides, the cordless impact driver has a 2-speed setting button, 18 adjustable position clutch, 1 drill working mode, with the max 30N.m torque which offers you all the daily needs. It's also a fantastic tool for DIYer and Crafter.
• ◆Quick Chuck & Easy Use: Working with this power drill is pretty easy and straightforward. The Auto-lock metal Keyless Chuck provides an automatic spindle lock that enables easy one-hand changing bits. It's a very lightweight handy drill, comfortable to hold, and it more than makes up for it in time savings. You will feel work has become more relaxed by using it.
• ◆Sweet Little Surprise: Wider range - Flexible Shaft can use in the places where driver bits are hard to reach; Versatile usage - The Drill Brush, in conjunction with the screw driver drill can easily remove and clean stains; Warm after-sales - Once we received your messages, we will quick response and take action dependently.

Product features

30Nm Cordless Drill with LED

18-30Nm (266 In-lbs) Max Torque & 18+1 Adjustment provide precise controls for drilling in wood, metal, plastic and all screwing.

The rotational switch allows you to either rotate forward or reverse based on your purposes

2 x 12V 1500mAh Batteries

Cordless screw driver comes with 2pcs 1500mAh Lithium-ion battery makes it always ready to use without restriction.

1 hour fast charging the battery allows a fast full charge keeps the power drill constantly running

2-Speed Drill Driver

The impact function is for drilling in brick, brickwork, and masonry.

The variable speed pressure trigger allows you to control the drilling speed. Low speed (0-350 rpm) is preferable for screwing; High speed (0-1350 rpm) is more efficient for drilling tasks.

Screw Driving with Extension

1. 250mm Flexible shaft extends your application and makes the work from special angles and little more comfortable space;

2. There are 6 screwdriver bits for different needs.

(3 Slotted Screwdriver, 3 Phillips Screwdriver)

Drilling - wood, metal, stone

This tool kit includes 3 types of drills for drilling wood, metal, plastic, marble, cement wall, ceramic tile and other stones.

GOXAWEE Cordless Drill Driver can meet the needs of most boreholes.

Size: (4mm, 5mm, 6mm)

Adapters for Hex Nut

Socket wrench 9 sizes (5-13mm) can be used in the automobile industry, households, manufacturing industry, construction, and other industries. Loosen all nuts, bolt heads, hooks, and other fasteners. Perfect match to this electric screwdriver.

Drilling brush - Cleaning

In conjunction with the high speed rotation of the battery drill, the brush can easily remove and clean stains;

Ideal choice for cleaning the bathtub, the floor, the toilet, the car, etc.

Bit Tips

• Carbide Drill : Masonry Drill can easily penetrate into different materials, such as ceramic tile, glass, hard plastic, concrete cement, travertine mirror, brick wall, wood. (6mm)
• Brad Point Drill : Suitable for drilling wood (4mm, 5mm, 6mm)
• HSS-R Metal Drill : Use for iron, alloyed and non-alloyed metals, non-ferrous metals, cast iron, hard plastics (4mm, 5mm, 6mm)

Product description

Versatile and easy to handle, the DEWALT DWD115K 3/8-inch VSR mid-handle drill kit with keyless chuck delivers the power you need in a light-duty drill for all your drilling and fastening projects. Enjoy the drill's variable-speed trigger, convenient reversing switch, and comfortable mid-handle grip so you can work smarter for longer.

3/8-Inch VSR Mid-Handle Drill Kit with Keyless Chuck At a Glance: Reliable 8-amp motor Variable-speed control from 0 to 2,500 RPM Soft, non-slip rubber grip and lightweight design Three-year limited warranty, one-year free service, 90-day money-back guarantee

The VSR mid-handle drill is ideal for a wide range of drilling and fastening applications. View larger.

Mid-handle grip

Patented DEWALT-Built Motor with Overload Protection

With its powerful 8-amp motor, the DEWALT DWD115K 3/8-inch VSR mid-handle drill is capable of delivering speeds of 0 to 2,500 RPM. This translates to quick, versatile drilling and driving.

Designed for Versatility and Durability

The dependable DWD115K is versatile enough for common around-the-home tasks and light, job-site work. The reversible drill features a 1-inch capacity when working in wood with a spade bit, and it can handle a capacity of 1-1/8 inches when used in wood with a hole saw. When used in steel with a twist bit, the drill can handle a capacity of 3/8-inch.

Its 3/8-inch ratcheting keyless chuck tightens as you work to deliver greater bit retention, and the drill's ball-bearing construction provides added durability.

Built with Comfortable, Accurate Handling in Mind

Comfortable handling goes a long way toward ensuring accurate results. The DWD115K is built to allow ergonomic hand positioning, and its soft grip and well-balanced design offer improved user comfort and better overall command of the drill. It also weighs an easy-to-manage 4.1 pounds, decreasing user fatigue after extended use.

The 3/8-inch VSR mid-handle drill kit with keyless chuck comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

One DEWALT DWD115K 3/8-inch VSR mid-handle drill and kit box.

The DEWALT VSR mid-handle drill comes with a durable kit box for safe keeping.

• 8-amp motor delivers high performance in heavy-duty applications
• 3/8-inch all-metal ratcheting keyless chuck for greater bit retention
• 0-2,500 RPM VSR trigger for versatility in drilling and fastening applications
• Mid-handle grip design with soft grip provides increased balance and comfort
• All ball-bearing construction provides greater durability and longer tool life

User questions & answers

Question:	Is there a lock on the trigger to keep the drill in the "on" position
Answer:	No, it doesn't, it will continue to spin after you let go of the trigger. At least when you just hold it in the air. In practice when you're drilling something in, I haven't found it to keep going, even with small screws.
Question:	Is it reversible drill
Answer:	This drill has no clutch so unless you are pretty familiar with these drills it has the potential to get away from you when the screw bottoms out.
Question:	I don't understand the comments saying this drill is useless as a screwdriver. Anyone else agree that this drives screws as easily as cordless drills
Answer:	I'm not sure how much power your device requires but I've found this drill to be very powerful for all my normal drilling operations.
Question:	What is the advantage of a mid handle grip rather than a pistol grip? I am a woman with average strength, inexperienced at DIY but want to learn
Answer:	At first I had the same problem, and after spraying a little WD-40 between the chuck and the ribbed area it opened immediately. Like magic! Hope this helps anybody with this problem.
Question:	Does this drill have an electric brake? When you let go of the trigger,does the bit stop spinning immediately
Answer:	Castor oil is a humectant, it does remove moisture from one place and transfers it to another. Its not a good thing to use in a dry climate. If you insist on using it, Its best to use at night before bed and wash off in the morning.
Question:	I have to drill some screws into mdf. There are no pre-drilled holes. Is this what I want
Answer:	It says that it is made in the USA
Question:	is this drill powerful enough to attach the 'power cone' attachment for polishing the chrome wheels on my car
Answer:	I would send a note to the seller to ask. The bars I got came with one white, one brown, and a nice silicone soap dish. The only difference in ingredients in the brown bar is that it contains olive particulates which make it more textured, for scrubbing. Both have olive oil. To me, they feel the same, smell the same, and have had the same effects on my skin. Love their products!
Question:	I cannot insert the drill bit - My chuck is too tight and I cannot get it to open. I have followed the instructions in the manual. Help
Answer:	The butter cream comes in a plastic, vacuum sealed container and their oil (same ingredients) comes in a dark amber glass container.

Product features

Highly Efficient Motor

The DWD115K Drill powers through tough jobs like a pro with ease, all thanks to the powerful 8 Amp motor that delivers 0-2,500 rpm speed, even for heavy-duty applications. . The unique feature of this drill in particular is the 3/8" all-metal, ratcheting, keyless chuck that makes a better bit retention possible.

Specially designed Mid-Handle Grip

Having is a solid grip on power tools and ease of handling is as important as a powerful performance. This Corded Drill from Dewalt, is designed with keeping ease of usage and handling in mind. The grip of the handle is placed in the middle to give the user increased balanced and control and the soft grip ensures comfort.

Durable

The drill is strategically designed with an all ball bearing construction that makes it durable. The Drill comes in a carrying case to keep it safe while carrying it outside.

• ✅Top Rated 12-Volt Cordless Drill
• ✅Unmatched power : The electric drill has a high-speed motor can provide max 180 IN-LB (20NM) torque and 2 speeds (0-450 and 0-1500 rpm), 300 Unit Watts Out (UWO) for a range of fastening and drilling applications.
• ✅Super configuration：The best 3/8-inch keyless chuck that can clamp the bit without falling off and stop working. The power drill cordless has a 24-position clutch and can adjust the torque output to control the depth of the screw or fastener. The bright LED light allows you to see more clearly in the dark work area.
• ✅Powerful Battery Pack:Maximum 12 voltage 1.5Ah lithium ion battery, its charging time can be extended 4 times, running time can be increased by up to 48%, and its weight is 45% lighter than nickel-cadmium batteries. Fast charging in 1 hour is 15% faster than the same type.
• ✅Widely Applications：Compact, lightweight design fits into tight areas，Ideal for Home Improvement & DIY Project ，car repair，drilling into wood, metal plastic and all screw driving tasks.Weighs only 2.5 lbs. and has an Non-slip Rubber-covered handle for being breezily operated in one hand exceptional command, comfort, and grip.
• ✅GardenJoy BENEFITS : 5-Year Warranty! GardenJoy is proudly located in the United States and can provide industry-leading warranty services and knowledgeable support experts.And you will get：12V Drill/Driver Combo comes with 25pcs drill driver tool accessories(including a Tile drill,Goggles) 1-Battery, 1-Charger And operating instructions.

User questions & answers

Question:	what is the weight of the drill with a battery
Answer:	This weight is only 2.2 pounds and can be used by both men and women.
Question:	Whether this 12v machine can drill the wood with 3/8 inch (10.0mm) drill bit
Answer:	The keyless auto chuck can hold the bit's shank no bigger than 10MM, so it's OK to insert the 3/8 inch (10.0mm) drill bit to drill wood.
Question:	Does it have variable speed control
Answer:	Yes, it has variable speed settings (0-450 RPM / 0-1500 RPM)
Question:	Is this a two-speed cordless drill
Answer:	Hello, this drill has a dual speed setting of 450r / min - 1500r / min to match your mission. Hope to help you.